ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high ... WE catalogue.pdf · Balancing Executed with half sized key IEC 34-14 ISO 8821 Environmental Place : Non-hazardous conditions

ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are

designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia level 1B,

Cemp-eu (eff 1), SS530 and GB18613-2006.

These motors are also built to comply with the requirements for European “CE” marking and International

Electrotechnical Commission – IEC 60034 ( included 60034-1, 60034-5, 60034-7, 60034-8, 60034-9, 60034-11,

60034-12 and 60034-14). Compliance with IEC60034 means that these motors also complies with many standards

from other countries that are based on IEC60034.

Features of WE series motors include :Features of WE series motors include :

European design, better structure with high strength ragged cast iron frames, Removable feet with more

suitable for the application of petroleum, chemical, metallurgy, cement and parper industries, especially suitable for

the long time and at full capcity operation of the fans, pumps & compressors etc.

Item Standard Specifications

Type of Motor Totally-enclosed fan-cooled squirrel cage induction motor

Time duty Maximum continuous rating, S1 duty

Cooling method Self external fan, Cooling design IEC 34-6, IC 411

Method of starting Full voltage direct on line starting or star-delta starting

Standard Specification:

Method of starting Full voltage direct on line starting or star-delta starting

Mounting Horizontal foot mounting, flange mounting : B3; B5; B14; B34; B35; V1

Insulation class & Adopting class F insulation and checking permissible limits of temperature rise

Temperature rise against that of class B to improve the insulation reliability

Rotor winding Squirrel cage, aluminium conductor with end-ring and wafter blades integrally cast

Drive method Direct , unless otherwise specified

Direction of rotation Bi-directional, Direction of rotation of motor can be reversed by interchanging any Direction of rotation Bi-directional, Direction of rotation of motor can be reversed by interchanging any

two of the power lines

Test procedure IEC60034-2, GB/T1032 efficiency by summation of losses method

Shaft Carbon steel, round shaft with key

Bearing Grease pre-packed shielded ball bearing

Lubrication Lithium-base grease (shell Alvania R3)

Painting Phenolic rust-proof base plus lacquer surface finish; Painting in Green

Nameplate Stainless steelNameplate Stainless steel

Grounding terminal NE set inside the terminal box

Fan Polypropylene plastic

Balancing Executed with half sized key IEC 34-14 ISO 8821

Environmental Place : Non-hazardous

conditions Standard Ambient temperature : -20°C to 40° C

Relative Humidity: Less than 90% RH (non-condensation) Relative Humidity: Less than 90% RH (non-condensation)

Altitude: less than 1000 metres above sea level

Motor types WE - 50Hz (2P/3000rpm, 4P/1500rpm, 6P/1000rpm, 8P/750rpm, 10P/600rpm)

380V 400V 415V

(A) (A) (A)

6 80-1 905 1.08 1.03 0.99 0.70 74.0 4.7 3.90 1.9 2.2 0.00194 18

8 90S 705 1.26 1.20 1.16 0.62 72.0 6.0 5.01 2.0 2.0 0.0033 22

4 80-1 1415 1.42 1.35 1.30 0.73 80.7 6.5 3.71 2.4 2.3 0.00148 18

6 80-2 908 1.58 1.50 1.45 0.70 75.4 4.7 5.78 1.9 2.2 0.00231 20

8 90L 705 1.86 1.77 1.71 0.62 72.5 6.0 7.45 2.0 2.0 0.0043 24

2 80-1 2845 1.73 1.64 1.58 0.82 80.5 7.0 2.52 2.2 2.3 0.0011 17

4 80-2 1410 1.89 1.80 1.73 0.73 82.3 6.5 5.08 2.3 2.3 0.00165 19

6 90S 925 2.04 1.94 1.87 0.72 77.7 5.5 7.74 2.0 2.3 0.00321 24

8 100L-1 705 2.39 2.27 2.19 0.65 73.5 6.0 10.16 2.0 2.0 0.0069 31

2 80-2 2845 2.40 2.28 2.20 0.84 82.8 7.4 3.69 2.2 2.3 0.0013 18

4 90S 1420 2.59 2.46 2.37 0.77 83.8 6.0 7.40 2.3 2.5 0.00232 23

6 90L 920 2.91 2.76 2.66 0.72 79.9 5.5 11.42 2.0 2.3 0.00412 26

8 100L-2 705 3.37 3.20 3.08 0.65 76.3 6.0 14.90 2.0 2.0 0.0103 32

2 90S 2855 3.07 2.92 2.81 0.88 84.1 7.0 5.02 2.2 2.3 0.00185 23

4 90L 1420 3.47 3.30 3.18 0.77 85.0 6.0 10.09 2.3 2.5 0.00312 29

6 100L 930 3.68 3.50 3.37 0.76 81.5 5.5 15.40 2.0 2.2 0.00845 34

8 112M 710 4.21 4.00 3.86 0.69 78.4 6.0 20.18 2.0 2.0 0.013 38

2 90L 2860 4.38 4.16 4.01 0.89 85.6 7.0 7.35 2.2 2.3 0.00215 26

4 100L-1 1440 4.83 4.59 4.42 0.80 86.4 7.0 14.59 2.3 2.5 0.00779 35

6 112M 945 5.18 4.92 4.74 0.77 83.4 6.5 22.23 2.0 2.2 0.1326 40

8 132S 715 5.89 5.60 5.40 0.70 80.9 6.0 29.38 2.0 2.0 0.034 55

2 100L 2870 5.97 5.67 5.47 0.88 86.7 7.5 9.98 2.2 2.5 0.00425 34

4 100L-2 1460 6.36 6.04 5.82 0.82 87.4 7.0 19.62 2.3 2.5 0.00865 39

Rated Power

0.37 0.5

0.55 0.75

0.75 1.0

1.1 1.5

1.5 2.0

Current Power

Factor

COSθ

Efficiency

%

ILR /

IFL

2.2 3.0

Weight

KG

Rated

Spped

(RPM)

Frame

SizePole

HPKW

Rated

Torque

(TFL) Nm

TLR /

TFL

TM /

TFL

Moment of

Inertia J

Kgm2

4 100L-2 1460 6.36 6.04 5.82 0.82 87.4 7.0 19.62 2.3 2.5 0.00865 39

6 132S 954 7.06 6.71 6.47 0.76 84.9 6.5 30.03 2.1 2.5 0.3716 57

8 132M 715 7.76 7.37 7.10 0.71 82.7 6.0 40.07 2.0 2.0 0.042 71

2 112M 2875 7.71 7.32 7.06 0.90 87.6 7.5 13.29 2.2 2.5 0.0065 41

4 112M 1445 8.28 7.87 7.59 0.83 88.3 7.0 26.44 2.2 2.5 0.0185 45

6 132M 965 9.28 8.82 8.50 0.76 86.1 6.5 39.59 2.1 2.5 0.04889 73

8 160M-1 725 9.79 9.30 8.96 0.73 85.0 6.0 52.69 2.1 2.2 0.0889 155

2 132S-1 2925 10.48 9.96 9.60 0.90 88.6 7.5 17.96 2.2 2.5 0.01456 60

4 132S 1455 11.42 10.85 10.46 0.82 89.2 7.0 36.10 2.3 2.5 0.03301 62

6 132M 965 12.58 11.95 11.52 0.76 87.4 6.5 54.43 2.1 2.5 0.05845 77

8 160M-2 730 13.13 12.47 12.02 0.74 86.0 6.0 71.95 2.1 2.2 0.0958 109

2 132S-2 2925 14.15 13.44 12.95 0.90 89.5 7.5 24.49 2.2 2.5 0.1565 63

4 132M 1460 15.42 14.65 14.12 0.82 90.1 7.0 49.06 2.3 2.5 0.04121 74

6 160M 970 16.63 15.80 15.23 0.77 89.0 6.5 73.84 2.0 2.3 0.1212 110

8 160L 730 17.66 16.78 16.17 0.74 87.2 6.0 98.12 2.0 2.2 0.1021 131

2 160M-1 2935 20.49 19.47 18.77 0.90 90.6 7.5 35.79 2.2 2.5 0.0549 109

4 160M 1460 21.61 20.53 19.79 0.85 91.0 7.0 71.95 2.2 2.5 0.1052 115

6 160L 970 23.81 22.62 21.80 0.78 90.0 6.4 108.30 2.0 2.3 0.1452 133

8 180L 725 25.38 24.11 23.24 0.74 89.0 6.6 144.90 2.0 2.3 0.2275 173

2 160M-2 2935 27.74 26.35 25.40 0.90 91.3 7.5 48.81 2.2 2.5 0.0635 119

4 160L 1460 29.31 27.84 26.83 0.86 91.8 7.5 98.12 2.2 2.5 0.1123 135

6 180L 975 30.92 29.37 28.31 0.81 91.0 7.0 146.92 2.0 2.3 0.2285 174

8 200L 735 33.77 32.08 30.92 0.75 90.0 6.6 194.90 2.0 2.3 0.395 234

2 160L 2940 33.79 32.10 30.94 0.91 91.8 7.5 60.09 2.2 2.5 0.0725 136

4 180M 1470 35.45 33.68 32.46 0.86 92.2 7.5 120.19 2.2 2.5 0.1659 170

6 200L-1 980 37.93 36.03 34.73 0.81 91.5 7.0 180.28 2.1 2.4 0.342 219

8 225S 730 40.64 38.61 37.21 0.76 91.0 6.6 242.02 1.9 2.0 0.603 276

2 180M 2950 40.11 38.10 36.72 0.91 92.2 7.5 71.22 2.0 2.2 0.1025 172

4 180L 1470 41.97 39.87 38.43 0.86 92.6 7.5 142.93 2.2 2.5 0.1865 184

6 200L-2 980 44.85 42.61 41.07 0.81 92.0 7.0 214.39 2.1 2.4 0.386 228

4.0 5.5

18.5 25

22 30

5.5 7.5

11 15

7.5 10

15 20

3.0 4.0

6 200L-2 980 44.85 42.61 41.07 0.81 92.0 7.0 214.39 2.1 2.4 0.386 228

8 225M 730 48.06 45.66 44.01 0.76 91.5 6.6 287.81 1.9 2.0 0.698 298# Data are subjected to revisions without any prior notice. ILR/IFL = Locked Rotor Current / Rated Current

TLR/TFL = Locked Rotor Torque / Rated Torque

TM/TFL = Pull-up Torque / Rated Torque

22 30

380V 400V 415V

(A) (A) (A)

2 200L-1 2950 54.53 51.80 49.93 0.91 92.9 7.5 97.12 2.0 2.3 0.173 223

4 200L 1470 54.95 52.20 50.31 0.89 93.2 7.2 194.90 2.2 2.5 0.302 235

PERFORMANCE DATA - 380~415V, 50Hz

Current Power

Factor

COSθ

Weight

KGTM / TFL

Moment of

Inertia J

Kgm2

30 40

KW HPEfficiency % ILR / IFL

Rated

Torque

(TFL) Nm

TLR / TFL

Rated Power

PoleFrame

Size

Rated

Spped

(RPM)

4 200L 1470 54.95 52.20 50.31 0.89 93.2 7.2 194.90 2.2 2.5 0.302 235

6 225M 980 58.66 55.73 53.72 0.84 925.0 7.0 292.35 2.0 2.3 0.625 296

8 250M 735 62.64 59.51 57.36 0.79 92.1 6.6 389.80 1.9 2.0 0.983 375

2 200L-2 2950 66.84 63.50 61.20 0.91 93.3 7.5 119.78 2.0 2.3 0.195 242

4 225S 1480 69.03 65.58 63.21 0.87 93.6 7.2 238.75 2.2 2.5 0.538 290

6 250M 980 69.89 66.40 64.00 0.87 96.0 7.0 360.56 2.1 2.5 0.985 380

8 280S 735 76.52 72.69 70.06 0.79 93.0 6.6 480.75 1.9 2.2 1.857 480

2 225M 2965 80.00 76.00 73.25 0.91 93.7 7.5 144.94 2.0 2.3 0.325 302

37 50

30 40

2 225M 2965 80.00 76.00 73.25 0.91 93.7 7.5 144.94 2.0 2.3 0.325 302

4 225M 1480 83.43 79.26 76.40 0.87 94.2 7.2 290.37 2.2 2.5 0.635 326

6 280S 985 85.03 80.78 77.86 0.86 93.5 7.0 436.29 2.1 2.5 1.7325 470

8 280M 735 92.66 88.03 84.85 0.79 93.4 6.6 584.69 1.9 2.2 1.998 560

2 250M 2970 98.78 93.84 90.45 0.90 94.0 7.5 176.85 2.0 2.3 0.395 382

4 250M 1480 99.68 94.70 91.28 0.89 94.2 7.2 354.90 2.2 2.5 0.785 385

6 280M 985 103.59 98.41 94.85 0.86 93.8 7.0 533.25 2.1 2.5 1.965 545

8 315S 740 115.79 110.00 106.02 0.81 93.8 6.6 709.80 1.8 2.0 4.959 915

45 60

55 75

8 315S 740 115.79 110.00 106.02 0.81 93.8 6.6 709.80 1.8 2.0 4.959 915

2 280S 2975 132.37 125.75 121.20 0.91 94.6 7.5 240.76 2.0 2.3 0.683 515

4 280S 1485 138.31 131.39 126.64 0.87 94.7 7.2 482.32 2.2 2.5 1.552 515

6 315S 985 149.47 142.00 136.87 0.85 94.3 7.0 727.16 2.0 2.2 3.723 866

8 315M 740 156.84 149.00 143.61 0.81 94.3 6.6 967.91 1.8 2.0 5.825 991

2 280M 2980 158.18 150.27 144.84 0.91 95.0 7.5 288.42 2.0 2.3 0.765 545

4 280M 1845 165.45 157.18 151.50 0.87 95.0 7.2 465.85 2.2 2.5 1.865 605

6 315M 985 178.95 170.00 163.86 0.85 94.5 7.0 872.59 2.0 2.2 4.526 948

75 100

90 1256 315M 985 178.95 170.00 163.86 0.85 94.5 7.0 872.59 2.0 2.2 4.526 948

8 315L-1 740 185.26 176.00 169.64 0.82 94.5 6.6 1161.49 1.8 2.0 6.753 1083

2 315S 2975 203.16 193.00 186.02 0.91 95.0 7.1 353.11 1.8 2.2 1.558 930

4 315S 1485 209.47 199.00 191.81 0.88 95.4 6.9 707.41 2.1 2.2 3.48 931

6 315L-1 985 215.79 205.00 197.59 0.86 95.0 6.7 1066.50 2.0 2.2 5.157 1120

8 315L-2 740 226.32 215.00 207.23 0.82 94.8 6.4 1419.59 1.8 2.0 7.352 1174

2 315M 2975 243.16 231.00 222.65 0.91 95.4 7.1 423.73 1.8 2.2 1.726 980

4 315M 1485 251.58 239.00 230.36 0.88 95.5 6.9 848.89 2.2 2.2 3.678 1017132 180

110 150

4 315M 1485 251.58 239.00 230.36 0.88 95.5 6.9 848.89 2.2 2.2 3.678 1017

6 315L-2 985 257.89 245.00 236.14 0.86 95.0 6.7 1279.80 2.0 2.2 5.685 1185

8 355M-1 745 270.53 257.00 247.71 0.82 95.0 6.4 1692.08 1.8 2.0 12.94 1815

2 315L-1 2980 294.74 280.00 269.88 0.91 95.4 7.1 512.75 1.8 2.2 1.941 1090

4 315L-1 1485 304.21 289.00 278.55 0.88 95.7 6.9 1028.96 2.1 2.2 4.472 1085

6 355M-1 990 304.21 289.00 278.55 0.88 95.5 6.7 1543.43 1.9 2.0 9.57 1705

8 355M-2 745 326.32 310.00 298.80 0.82 95.5 6.4 2051.01 1.8 2.0 13.32 1905

6 355M-2 990 342.11 325.00 313.25 0.88 95.6 6.7 1736.36 1.9 2.0 9.89 1785

132 180

160 215

6 355M-2 990 342.11 325.00 313.25 0.88 95.6 6.7 1736.36 1.9 2.0 9.89 1785

8 355L-1 745 363.16 345.00 332.53 0.83 95.6 6.4 2307.38 1.8 2.0 14 1985

2 315L-2 2980 366.32 348.00 335.42 0.91 96.0 7.1 640.94 1.8 2.2 2.212 1190

4 315L-2 1485 378.95 360.00 346.99 0.88 95.8 6.9 1286.20 2.1 2.2 4.856 1200

6 355M-3 990 381.05 362.00 348.92 0.88 95.5 6.7 1929.29 1.9 2.0 11.1 1890

8 355L-2 745 403.16 383.00 369.16 0.83 95.6 6.4 2563.76 1.8 2.0 14.9 2060

225 300 6 355L-1 990 427.37 406.00 391.33 0.88 95.7 6.7 2170.45 1.9 2.0 11.3 1950

2 355M 2985 421.05 400.00 385.54 0.90 96.0 7.1 799.83 1.6 2.2 3.849 1710

200 270

180 240

2 355M 2985 421.05 400.00 385.54 0.90 96.0 7.1 799.83 1.6 2.2 3.849 1710

4 355M 1490 457.89 435.00 419.28 0.91 96.0 7.1 1602.35 2.1 2.2 7.364 1740

6 355L-2 990 473.68 450.00 433.73 0.88 95.9 6.7 2411.62 1.9 2.0 11.8 2000

2 355L-1 2985 516.84 491.00 473.25 0.90 96.3 7.1 895.81 1.6 2.2 3.949 1870

4 355L-1 1490 522.11 496.00 478.07 0.89 96.3 6.9 1794.63 2.1 2.2 8.014 1870

6 355L-3 990 530.53 504.00 485.78 0.88 96.0 6.7 2701.01 1.9 2.0 12.9 2080

2 355L-2 2985 574.74 546.00 526.27 0.91 96.4 7.1 1007.79 1.6 2.2 3.995 1920

4 355L-2 1490 587.37 558.00 537.83 0.89 96.4 6.9 2018.96 2.1 2.2 9.1 1975315 420

250 335

280 375

4 355L-2 1490 587.37 558.00 537.83 0.89 96.4 6.9 2018.96 2.1 2.2 9.1 1975

# Data are subjected to revisions without any prior notice. ILR/IFL = Locked Rotor Current / Rated Current

TLR/TFL = Locked Rotor Torque / Rated Torque

TM/TFL = Pull-up Torque / Rated Torque

B3 Mounting and Overall Dimensions

A B C D E F G H K DH GA AA AB AC AD BB KK ED HA HD L

80 2,4,6 125 100 50 19j6 40 6 15.5 80 10 M6X16 21.5 35 160 160 145 130 M24X1.5 32 12 225 280

90S 2,4,6 140 100 56 24j6 50 8 20 90 10 M8X20 27 36 180 180 155 140 M24X1.5 32 12 245 315

90L 2,4,6,8 140 125 56 24j6 50 8 20 90 10 M8X20 27 36 180 180 155 165 M24X1.5 32 12 245 340

100L 2,4,6,8 160 140 63 28j6 60 8 24 100 12 M10X25 31 40 200 220 190 175 M24X1.5 40 14 295 435

112M 2,4,6,8 190 140 70 28j6 60 8 24 112 12 M10X25 31 45 230 220 190 180 M30X2 40 15 305 450

132S 2,4,6,8 216 140 89 38k6 80 10 33 132 12 M12X30 41 55 265 260 220 190 M30X2 56 18 355 465

Overall Dimension(mm)Mounting Dimensions(mm)Frame

SizePoles

132S 2,4,6,8 216 140 89 38k6 80 10 33 132 12 M12X30 41 55 265 260 220 190 M30X2 56 18 355 465

132M 2,4,6,8 216 178 89 38k6 80 10 33 132 12 M12X30 41 55 265 260 220 230 M30X2 56 18 355 505

160M 2,4,6,8 254 210 108 42k6 110 12 37 160 15 M16X36 46 65 315 315 265 260 M36X2 85 20 425 608

160L 2,4,6,8 254 254 108 42k6 110 12 37 160 15 M16X36 46 65 315 315 265 305 M36X2 85 20 425 652

180M 2,4 279 241 121 48k6 110 14 42.5 180 15 M16X36 51.5 70 350 360 280 315 M36X2 80 22 460 690

180L 4,6,8 279 279 121 48k6 110 14 42.5 180 15 M16X36 51.5 70 350 360 280 350 M36X2 80 22 460 730

200L 2,4,6,8 318 305 133 55m6 110 16 49 200 19 M20X42 59 70 390 400 310 370 M48X2 100 25 510 760

225S 4,8 356 286 149 60m6 140 18 53 225 19 M20X42 64 75 435 450 310 370 M48X2 125 28 555 810

225M 2 356 311 149 55m6 110 16 49 225 19 M20X42 60 75 435 450 335 395 M48X2 100 28 555 805

225M 4,6,8 356 311 149 60m6 140 18 53 225 19 M20X42 64 75 435 450 335 395 M48X2 125 28 555 835

250M 2 406 349 168 60m6 140 18 53 250 24 M20X42 64 80 485 485 375 445 M64X 2 125 30 625 910

250M 4,6,8 406 349 168 65m6 140 18 58 250 24 M20X42 69 80 485 485 375 445 M64X 2 125 30 625 910

280S 2 457 368 190 65m6 140 18 58 280 24 M20X42 69 85 545 550 405 490 M64X 2 100 35 685 985

280S 4,6,8 457 368 190 75m6 140 20 67.5 280 24 M20X42 79.5 85 545 550 405 490 M64X 2 100 35 685 1005

280M 2 457 419 190 65m6 140 18 58 280 24 M20X42 69 85 545 550 405 540 M64X 2 100 35 685 1030

280M 4,6,8 457 419 190 75m6 140 20 67.5 280 24 M20X42 79.5 85 545 550 405 540 M64X 2 100 35 685 1060

315S 2 508 406 216 65m6 140 18 58 315 28 M20X46 69 120 630 625 530 570 M64X 2 110 45 845 1180

315S 4,6,8 508 406 216 80m6 170 22 71 315 28 M20X46 85 120 630 625 530 570 M64X 2 140 45 845 1210

315M 2 508 457 216 65m6 140 18 58 315 28 M20X46 69 120 630 625 530 680 M64X 2 110 45 845 1290

315M 4,6,8 508 457 216 80m6 170 22 71 315 28 M20X46 85 120 630 625 530 680 M64X 2 140 45 845 1320

315L 2 508 508 216 65m6 140 18 58 315 28 M20X46 69 120 630 625 530 680 M64X 2 110 45 845 1290

315L 4,6,8 508 508 216 80m6 170 22 71 315 28 M20X46 85 120 630 625 530 680 M64X 2 140 45 845 1320

355M 2 610 560 254 75m6 140 20 67.5 355 28 M20X46 79.5 120 730 710 615 750 M64X 2 160 52 970 1526

355M 4,6,8 610 560 254 95m6 170 25 86 355 28 M20X46 100 120 730 710 615 750 M64X 2 160 52 970 1556

355L 2 610 630 254 75m6 140 20 67.5 355 28 M20X46 79.5 120 730 710 615 750 M64X 2 160 52 970 1526

355L 4,6,8 610 630 254 95m6 170 25 86 355 28 M20X46 100 120 730 710 615 750 M64X 2 160 52 970 1556

# Data are subjected to revisions without any prior notice.# Data are subjected to revisions without any prior notice.

V1 Mounting and Overall Dimensions

D E F G M N P S T DH GA AC ED KK HF LA LB L

80 2,4,6 19j6 40 6 15.5 165 130 200 4-ø12 4 M6X16 21.5 160 32 M24X1.5 225 12 265 305

90S 2,4,6 24j6 50 8 20 165 130 200 4-ø12 4 M8X20 27 175 32 M24X1.5 245 12 295 345

90L 2,4,6 24j6 50 8 20 165 130 200 4-ø12 4 M8X20 27 175 32 M24X1.5 245 12 320 370

100L 2,4,6 28j6 60 8 24 215 180 250 4-ø15 4 M10X25 31 220 40 M24X1.5 295 13 425 485

112M 2,4,6 28j6 60 8 24 215 180 250 4-ø15 4 M10X25 31 225 40 M30X2 305 14 440 500

PolesFrame

Size

Mounting dimensions(mm) Overall dimensions(mm)

112M 2,4,6 28j6 60 8 24 215 180 250 4-ø15 4 M10X25 31 225 40 M30X2 305 14 440 500

132S 2,4,6 38k6 80 10 33 265 230 300 4-ø15 4 M12X30 41 26 56 M30X2 355 14 430 510

132M 2,4,6 38k6 80 10 33 265 230 300 4-ø15 4 M12X30 41 26 56 M30X2 355 14 470 550

160M 2,4,6,8 42k6 110 12 37 300 250 350 4-ø19 5 M16X36 46 315 85 M36X2 425 15 540 650

160L 2,4,6,8 42k6 110 12 37 300 250 350 4-ø19 5 M16X36 46 315 85 M36X2 425 15 580 690

180M 2,4 48k6 110 14 42.5 300 250 350 4-ø19 5 M16X36 51.5 360 80 M36X2 460 15 640 750

180L 4,6,8 48k6 110 14 42.5 300 250 350 4-ø19 5 M16X36 51.5 360 80 M36X2 460 15 680 790

200L 2,4,6,8 55m6 110 16 49 350 300 400 4-ø19 5 M20X42 59 400 100 M48X2 510 17 730 840

225S 4,8 60m6 140 18 53 400 350 450 8-ø19 5 M20X42 64 450 125 M48X2 555 20 765 905

225M 2 55m6 110 16 49 400 350 450 8-ø19 5 M20X42 60 450 100 M48X2 555 20 800 910

225M 4,6,8 60m6 140 18 53 400 350 450 8-ø19 5 M20X42 64 450 125 M48X2 555 20 795 935

250M 2 60m6 140 18 53 500 450 550 8-ø19 5 M20X42 64 490 125 M64X 2 625 22 855 995

250M 4,6,8 65m6 140 18 58 500 450 550 8-ø19 5 M20X42 69 490 125 M64X 2 625 22 855 995

280S 2 65m6 140 18 58 500 450 550 8-ø19 5 M20X42 69 550 100 M64X 2 685 22 930 1070

280S 4,6,8 75m6 140 20 67.5 500 450 550 8-ø19 5 M20X42 79.5 550 100 M64X 2 685 22 930 1070

280M 2 65m6 140 18 58 500 450 550 8-ø19 5 M20X42 69 550 100 M64X 2 685 22 980 1120

280M 4,6,8 75m6 140 20 67.5 500 450 550 8-ø19 5 M20X42 79.5 550 100 M64X 2 685 22 980 1120

315S 2 65m6 140 18 58 600 550 660 8-ø24 6 M20X46 69 625 110 M64X 2 845 22 1200 1340

315S 4,6,8 80m6 170 22 71 600 550 660 8-ø24 6 M20X46 85 625 140 M64X 2 845 22 1200 1370

315M 2 65m6 140 18 58 600 550 660 8-ø24 6 M20X46 69 625 110 M64X 2 845 22 1310 1450

315M 4,6,8 80m6 170 22 71 600 550 660 8-ø24 6 M20X46 85 625 140 M64X 2 845 22 1310 1480

315L 2 65m6 140 18 58 600 550 660 8-ø24 6 M20X46 69 625 110 M64X 2 845 22 1310 1450

315L 4,6,8 80m6 170 22 71 600 550 660 8-ø24 6 M20X46 85 625 140 M64X 2 845 22 1310 1480

355M 2 75m6 140 20 67.5 740 680 800 8-ø24 6 M20X46 79.5 710 160 M64X 2 970 25 1525 1665

355M 4,6,8 95m6 170 25 86 740 680 800 8-ø24 6 M20X46 101 710 160 M64X 2 970 25 1530 1700

355L 2 75m6 140 20 67.5 740 680 800 8-ø24 6 M20X46 79.5 710 160 M64X 2 970 25 1525 1665

355L 4,6,8 95m6 170 25 86 740 680 800 8-ø24 6 M20X46 101 710 160 M64X 2 970 25 1530 1700355L 4,6,8 95m6 170 25 86 740 680 800 8-ø24 6 M20X46 101 710 160 M64X 2 970 25 1530 1700

# Data are subjected to revisions without any prior notice.

B5 Mounting and Overall Dimensions

D E F G M N P S T DH GA AC AD ED KK HF LA LB L

80 2,4,6 19j6 40 6 15.5 165 130 200 4-ø12 3.5 M6X16 21.5 160 125 32 M24X1.5 225 12 274 280

90S 2,4,6 24j6 50 8 20 165 130 200 4-ø12 3.5 M8X20 27 180 145 32 M24X1.5 245 12 307 315

90L 2,4,6 24j6 50 8 20 165 130 200 4-ø12 3.5 M8X20 27 180 145 32 M24X1.5 245 12 332 340

100L 2,4,6 28j6 60 8 24 215 180 250 4-ø15 4 M10X25 31 220 170 40 M24X1.5 295 13 427 435

112M 2,4,6 28j6 60 8 24 215 180 250 4-ø15 4 M10X25 31 220 180 40 M30X2 305 14 442 450

132S 2,4,6 38k6 80 10 33 265 230 300 4-ø15 4 M12X30 41 260 215 56 M30X2 365 14 455 465

132M 2,4,6 38k6 80 10 33 265 230 300 4-ø15 4 M12X30 41 260 215 56 M30X2 365 14 495 505

160M 2,4,6,8 42k6 110 12 37 300 250 350 4-ø19 5 M16X36 46 315 270 85 M36X2 445 15 596 608

160L 2,4,6,8 42k6 110 12 37 300 250 350 4-ø19 5 M16X36 46 315 270 85 M36X2 445 15 640 652

180M 2,4 48k6 110 14 42.5 300 250 350 4-ø19 5 M16X36 51.5 360 305 80 M36X2 480 15 676 690

Mounting dimensions(mm) Overall dimensions(mm)Frame

SizePoles

180M 2,4 48k6 110 14 42.5 300 250 350 4-ø19 5 M16X36 51.5 360 305 80 M36X2 480 15 676 690

180L 4,6,8 48k6 110 14 42.5 300 250 350 4-ø19 5 M16X36 51.5 360 305 80 M36X2 480 15 716 730

200L 2,4,6,8 55m6 110 16 49 350 300 400 4-ø19 5 M20X42 59 400 330 100 M48X2 530 17 744 760

225S 4,8 60m6 140 18 53 400 350 450 8-ø19 5 M20X42 64 450 350 125 M48X2 575 20 792 810

225M 2 55m6 110 16 49 400 350 450 8-ø19 5 M20X42 60 450 350 100 M48X2 575 20 789 805

225M 4,6,8 60m6 140 18 53 400 350 450 8-ø19 5 M20X42 64 450 350 125 M48X2 575 20 817 835

250M 2 60m6 140 18 53 500 450 550 8-ø19 5 M20X42 64 485 360 125 M64X 2 635 22 892 910

250M 4,6,8 65m6 140 18 58 500 450 550 8-ø19 5 M20X42 69 485 360 125 M64X 2 635 22 892 910

280S 2 65m6 140 18 58 500 450 550 8-ø19 5 M20X42 69 550 450 100 M64X 2 725 22 967 985

280S 4,6,8 75m6 140 20 67.5 500 450 550 8-ø19 5 M20X42 79.5 550 450 100 M64X 2 725 22 985 1005

280M 2 65m6 140 18 58 500 450 550 8-ø19 5 M20X42 69 550 450 100 M64X 2 725 22 1012 1030

280M 4,6,8 75m6 140 20 67.5 500 450 550 8-ø19 5 M20X42 79.5 550 450 100 M64X 2 725 22 1040 1060

# Data are subjected to revisions without any prior notice.

80

90

100

112

132

160

180

200

225

250

280

315

355

6208-ZZ-C3

6207-ZZ-C3

6206-ZZ-C3

6206-ZZ-C3

6205-ZZ-C3

NU319

NU319

6317-C3

6314-C3

6313-C3

6319-C3/7319B(V1)

Non-driving EndDriving End

6311-C3

6312-C3

6313-C3

6314-C3

6317-C3

6317-C3/7317B(V1)

6205-ZZ-C3

6206-ZZ-C3

6206-ZZ-C3

6207-ZZ-C3

6208-ZZ-C3

6209-ZZ-C3

6312-C3

6313-C3

6314-C3

6317-C3/7317B(V1)

6319-C3/7319B(V1)

2 pole

6205-ZZ-C3

6206-ZZ-C3

6206-ZZ-C3

6207-ZZ-C3

6208-ZZ-C3

6209-ZZ-C3

6211-C3

6212-C36312-C3

6311-C3

6209-ZZ-C3

6313-C3

6314-C3

6317-C3

6319-C3

6207-ZZ-C3

6208-ZZ-C3

6209-ZZ-C3

6211-C3

6212-C3

6312-C3

2 pole

6205-ZZ-C3

6206-ZZ-C3

6206-ZZ-C3

Frame

Size 4,6,8 pole 4,6,8 pole

355

# Data are subjected to revisions without any prior notice.

NU319 6319-C3/7319B(V1)6319-C3/7319B(V1)6319-C3

Voltage / Frequency

Connection/Method of Starting

A. Standard three phase motors with cage rotor:

Star connection Delta connection Connection to star-delta starter

B. Multi-speed motors:

a. Tapped Winding: b. With 2 separate windings:

Standard voltages and frequencies are 220-240V / 380-415V at 50Hz for 2.2kW and below, 380- 415V / 660-

720V at 50Hz for 3kW and above, and other voltages such as 220-380V, 440-480V at 60Hz. Voltage

tolerance is ±5% and frequency tolerance is 1%. Voltage beyond these limits will cause a high winding

temperature rise. Other voltages can be made on request.

The standard terminal connection for 2.2kW and below is 220-240 volt delta / 380-415 volt star. These motors

are normally connected in star connection and suitable for Direct-On-Line starting.

For motors 3kW and above, the standard terminal connection is 380-415 volt delta / 660-720 volt star and

suitable for both autotransformer and star-delta starting.

CONNECTION DIAGRAMS

Low speed High speed Low speed High speed

Motors can be customized on request:

1. Multi-Speed

2. Complete with Brake

3. Complete with PTC Thermister

4. IP 56 ,65, 66

5. Special Paint Finish/Corrosion-proof

6. Double ended shaft

7. Special shaft / flange dimension

8. Special Volt / Hz

9. C/W Anti-condensation Heater

10. TENV motor/Extend Lead Wire

11. Motors suitable for food processing

12. Low & High Temperature Resistant

We can also provide NEMA series Premium

High Efficiency motors that meet EPACT

& CSA C390 efficiency levels.

WE 3/2009WE 3/2009WE 3/2009

Certificate for Certificate for Certificate for Certificate for

Cemep-eu (Eff 1)

Certificate for Certificate for Certificate for Certificate for

Australian (Level 1B)

Certificate for