“Copyright 2007, Atlas Copco Compressors LLC Westfield, Massachusetts Any unauthorized use or copying of the contents or any part of this book is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.” No. 1310 3011 74 Ed. 0 2007-02 Atlas Copco Portable Air Compressor XAS 185 JD7 Parts list 1310 3011 74 Ed. 0 2007-02
53
Embed
Atlas Copco Portable Air Compressor XAS 185 · PDF fileAtlas Copco Portable Air Compressor XAS 185 ... Atlas Copco instruction ... Relates a part in list and drawing. "x" means...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
“Copyright 2007, Atlas Copco Compressors LLC Westfield, Massachusetts Any unauthorized use or copying of the contents or any part of this book is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.”
Ref. - Reference number. Relates a part in list and drawing. "x" means that the part is not shown on the drawing. "-" indicates the beginning of a new list item.
Part number. "---" directs to consult another list of which the heading mostly has the same designation . "***" means that the part is not available as spare part. Parts followed by one dot are comprised in the assembly(ies) listed above the first dot.
Qty - A number indicating the quantity of parts. The quantity is only related to its corresponding reference number ("Ref") and may differ from the total quantity of this part for the entire unit. For parts of an assembly the quantity mentioned is for one assembly. "AR" means "as required" : bulk material or quantity to be determined.
Name - Mostly part names. When machine types, Classification Societies, dimensions, etc. are mentioned under the same "Designation", look carefully for the part number for your specific equipment. When a selection is to be made, the various selections are indented and preceded by a dash.
Remarks - A number followed by a bracket, e.g. 1), refers to a footnote.
A number in bold, e.g. 1, refers to a "Service Kit". For the "Service Kit" number, see below list. Parts of one "Service Kit" may be spread over several pages.
ORDERING PARTS
Always quote the part number, "Designation" and quantity of the desired parts as well as type designation and serial number of the unit.
1310 3011 74 3
Table of Contents 1. Compressor Drive Group..............................................................................................................................5 2. Engine Mounts ...............................................................................................................................................7 3. Air Intake.........................................................................................................................................................9 4. Exhaust System ...........................................................................................................................................11 5. Cooling System............................................................................................................................................13 6. Air Outlet.......................................................................................................................................................15 7. Oil System ....................................................................................................................................................17 8. Regulating System ......................................................................................................................................19 9. Fuel System..................................................................................................................................................21 10. Hood Assembly Steel Version....................................................................................................................23 11. Body Work Steel Version ............................................................................................................................25
Do not mix oil brands.Follow Atlas Copco operating instructions for proper maintenance, lubricant grades and change intervals.Use only selected lubricant specified by Atlas Copco.Failure to comply will void warranty and may result in equipment damage.
INHALATIONHAZARD!
Do not use discharged air for breathing.
Failure to comply will result in death or serious injury.
BURST HAZARD!
Relieve air pressure before loosening oil filler cap or any fittings.
Contents under pressure.Failure to comply will result in death or serious injury.
Never reverse the battery polarity.
Never disconnect the battery while the engine is running. When starting with a spare battery, connect this battery in parallel with the standard one. Disconnect the spare battery after starting without disconnecting the standard battery.
Never run the engine with the main or voltage sensing cables disconnected.
Disconnect the alternator and regulator connections during arc welding on the unit .1310 0302 73
4.1310 3112 52 9747 6014 00 9747 6011 00
CAUTION
Atlas Copco Airpower 1613 3385 00
Removal of any of the followingsound absorptive material, including sealing strips on doors, panels and other canopy partsfan shroud
Operation of the compressor with any of the enclosure doors open.
Among those acts included in the prohibition against tampering are the acts listed below:
1310 4156 10
STARTING:
1. Crack open the air outlet valve(s).2. The starter switch has four positions - "OFF" -"RUN" - "AUX" and "START". Turn switch to "START" position to engage the engine starter and then release to "RUN" position when fault lights go out. If the engine fails to start, return the start switch to the "OFF" position. Allow any built up air pressure to bleed off for at least 20 seconds before another restart is attempted. Failure to allow proper bleed down of air pressure may result in damage to the engine's starter.
N OTE: For cold temperature operation use engine pre-heat. To operate pre-heat, turn unit to "ON" position and depress push button for 30 seconds, then turn switch to start position.
3. Allow engine to warm up before closing the air outlet valves.
BEFORE STARTING:
1. Check engine and compressor oil levels.2. Check fuel level. 3. Drain water and sediment from fuel filter. (If necessary)4. Check air filter vacuum indicators. Service filter element if indicator shows red.5. Check to make sure Circuit Breaker is not tripped. (Circuit Breaker is located inside canopy driectly behind control panel)
N OTE: Maximum out-of-level operation is 15 °.
DURING OPERATION:
At regular intervals check:
1. Vacuum indicators. If red part shows full out, stop unit and service filter element.2. Unloading and working pressures.
STOPPING:
1. Close air outlet valve(s) and allow engine to idle for two minutes.2. Move starter switch to "OFF".3. Fill fuel tank at the end of each days operation.
OPERATING INSTRUCTIONS
Engine is fitted with an alternator.Failure to comply with the following could result in death or serious injury
3.
2.
1.
WARNING
The following acts or the causing thereof by any person are prohibited by the Noise Control Act of 1972:
The removal or rendering inoperative, other that for the purpose of maintenance, repair, or replacement, of any noise control device or element of design (listed in this owner's manual) incorporated into this compressor in compliance with the Noise Control Act.
Compressor noise emission control informationThis compressor conforms to U.S. E.P.A. regulations for noise emissions applicable to portable air compressors.
The removal or rendering inoperative by any persons, other than for purposes of maintenance repair or replacement of any device or element of design incorporated into any new compressor for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in user
the use of the compressor after such device or element of design has been removed or rendered inoperative by any person.
Tampering with noise control system prohibited.Federal law prohibits the following acts or the causing thereof:
(A)
(2)
(1)
The use of the compressor after such device or element of design has been removed or rendered inoperative.
(B)
Atlas Copco Airpower 1613 3384 00
Removal or rendering inoperative any of the following:engine exhaust mufflercooling air exhaust and intake silencersacoustic baffleshousing components, canopy or bottom panelengine or compressor mountsinlet air throttling system
a.
e.f.
d.c.b.
1.
3.
b.
a.2.
SERVICE PAKS1310 3003 741310 3003 751310 3003 73 yearly (1000hr)