8/11/2019 Assembly Line Instructions
1/13
8/11/2019 Assembly Line Instructions
2/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
Step 3: Next attach part A on the ends of each side, right after part D. It should look the same
in the picture below.
Step 4: Attach the wheels (part E) to the two sides. The wheels go on the stick like thing.
Step 5: For the other set, attach part F to both sides. It should look like the picture below.
Step 6: Once again, attach wheels to each side. The wheels go on the stick looking thing.
And now, you have your two sets of wheels!
8/11/2019 Assembly Line Instructions
3/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
How to make the body: Robot 1
Part A Part B Part C Part D Part E
Attach part E Attach Part D to Combine parts Attach part A to
on the end of the corner of BCDE like so. connect the
2 part Cs. Part B twice. 2 part Bs.
8/11/2019 Assembly Line Instructions
4/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
Part F x1 Part G x2 Part H x2
Part I x1 Part J x2 Part K x2
Part L x4 Part M x1
Attach 4 part Ls to part M Attach Part H to previous Attach part F to the back of
as shown. part. part M to create the front bumper.
8/11/2019 Assembly Line Instructions
5/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
Attach part G x2 to part J x2. Attach part K x2 to part J x2. Attach part I to previous part.
Now attach previous part to the bumper.
Next Attach the wheels to the base. One of the front and one in the back.
8/11/2019 Assembly Line Instructions
6/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
Attach the steering unit and bumper to the base.
Robot 2 will complete.
8/11/2019 Assembly Line Instructions
7/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
How to Build the Engine Unit
1. Gather Piece N, G, and B 2. Take Part B x2 and attach them in the middle
3. Take the combined N+B and Combine G
4. Finish Combination of N, G, and B
8/11/2019 Assembly Line Instructions
8/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
5. Obtain part H x1
6. Obtain Part C x4
7. Combine Part H and C by placing each of the Part Cs in each corner of H.
8/11/2019 Assembly Line Instructions
9/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
8. Obtain Part A x2 and attach them Side by Side to one side of the Combined C+H
Combined Parts: A, C, and H
9. Gather Part 0 and Q and Place Q directly in the Center
10.Gather Combined O and Q and add part R Directly on top of Q
8/11/2019 Assembly Line Instructions
10/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
11.Gather Parts M x2 and place them on top of Part Q on the far left and right side
12.Gather Part Lx2 and add them to the left and right side of the Combined Center Piece (Q+R)
13.Gather Pieces J, I, and K.P
l
a
c
e
s
P
i
e
c
e
I
o
n
8/11/2019 Assembly Line Instructions
11/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
top of R on one half
Place J on the other side of I Place K on top of both J and I to combine them
14.Gather Part F x4 and part M x2. Place all 4 parts of F on top of Part M on each Circle. Part M can
go right above Part K.
15.Now Gather Part P and Part D and place them around each side of the Center Unit as shown
below.
8/11/2019 Assembly Line Instructions
12/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
16.Now take the Major 3 Parts show Below and combine them:
Part x Part y Part z
17.First Combine Part z to Part Y on the Grey Side (Piece D). Then Part x to Part y+z on the red side(Part p)
8/11/2019 Assembly Line Instructions
13/13
Alex GaoJohn Dunsmore
Steven GarverickTim Kaing
18.Congratulations You're Now done!
Evaluation :
1.) Bold titles to be more specific
2.) Dont stretch out pictures
3.) Too many Steps and pictures