ASSEMBLY INSTRUCTIONS Frameless Hinged Shower Door Door can be fitted as a left hand (as illustrated) or as a right hand V02/02/2013
ASSEMBLY INSTRUCTIONS
Frameless Hinged Shower Door
Door can be fitted as a left hand (as illustrated) or as a right hand
V02/02/2013
BEFORE YOU START, HERE IS SOME IMPORTANT INFORMATION
1) General Information
2) Additional Notes
Please inspect this product upon delivery. any missing parts or manufacturing
defects must be reported immediately to the supplier. Damage of defects reported
later will not be accepted. TAKE CARE WHEN HANDLING GLASS PARTS-AVOID
HEAVY CONTACT BETWEEN THE GLASS EDGES AND ANY HARD SURFACE.
Glass breakage claims will not be accepted after the product has been unpacked.
Please note--alumimium is a soft metal, and undergoes a series of extrusion.
fabrication, polishing and anodising processes in order to create your finished
shower enclosure. Some light surface marks are normal, and is a result of the
manufacturing processes. Quality control has ensured that this item is of a good
standard, and is fit for purpose.
Please read these instructions carefully before starting installation.Special care should be taken when drilling walls to avoid hidden pipes or electrical cables.
Note: this product is heavy and may require two people to install.
TOOLS REQUIRED
This product is heavy and may require two people to install.
Ø3mm Drill bit
Ø6mm Drill bit
Pencil
Spirit level
Tape measure
DESCRIPTION DESCRIPTIONPART IMAGE PART IMAGE
Drill
Flat-headScrewdriver
Cross headScrewdriver
Hammer
Silicone Sealant
1
ASSEMBLY INSTRUCTIONS-DRAWING
(1) 1xSupport Arm (in side panel box) (10) 1xMagnet Seal
(2) 1xWall Profile A (11) 1xUpright Magnet Profile
(3) 6xWall Plugs (12) 1xWood Spacer
(4) 7xScrews 4x30 (13) 1xBottom seal
(5) 15xScrew Cover Caps (14) 2xEnd Caps L/R
(6) 15xScrews 4x12 (15) 1xDrip Strip
(7) 15xScrew Cover Clips (16) 1xUpright Corner Profile
(8) 1xMoving panel (17) 1xSide panel
(9) 1xHandle (18) 1xWall Profile B
(2)
(1)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15) (16)
(17)
(18)
2
ASSEMBLY INSTRUCTIONS
Installation Steps
MAKE SURE THE TRAY IS LEVEL, USING A SPIRIT LEVEL, BEFORE
INSTALLING THIS SHOWER PANEL / DOOR.
Step 1
Step 2
Take Care Not To
x3 x3
x3
x3
Damage Wall Surface
Wood spacer3
Step 3
Step 4
Take Care Not To
Damage Wall Surface
Wood spacer
4
Step 5
Step 6
5
A A How to adjust the width of the frameless
hinged shower door
Minimum 10mm internal overlap required
Glass panel Vertical profile Wall profile
Maximum adjustment
Minimum adjustment
Glass panel Vertical profile Wall profile
Wall
Step 1
Step 2
Corner installation with a side panel
Take Care Not ToDamage Wall Surface
6
7
Step 3
Step 4
How to adjust the width of the frameless
side panel
Minimum 10mm internal overlap required
Glass panel
Glass panel
Vertical profile
Vertical profile
Wall profile
Wall profile
Wall
Maximum adjustment
Minimum adjustment
Step 5
8
CARE AND MAINTENANCE
COMMITMENT TO QUALITY
1) AFTER CARE INSTRUCTIONS
2) MAINTENANCE
Regularly clean your shower product with warm soapy water
Clean the plastic parts with a cloth and mild detergent. Never
use any abrasive creams, dissolvents, acetone or detergents
and disinfectants that contain chlorine. The supplier acceptsno liability for any type of use of care other than those contained
in these instructions. The supplier reserves the right to introduce
technical changes without notice.
It is our intention that the quality and functions of this productare of the highest standard. If you require help we advise you
firstly contact a competent plumber. However we understand that
this may not always be the case, so should you experience
any problems please contact out customer services quoting
the following:
Product name: 6mm Frameless Hinged Shower Door
Product code: HID7602 HID8002 HID9002
Customer help line number:0844 804 45 45
to prevent lime scale build up. Do not use abrasive cleaning
fluids or materials, or strong chemical cleaners as this will
damage the product surface.
9