Assembling Your Crystal Candelabra Centerpiece - … Your Crystal Candelabra Centerpiece Need help? Call us at (512) 821-1178 or email us at [email protected]

Assembling Your Crystal Candelabra Centerpiece

Need help? Call us at (512) 821-1178 or email us at [email protected]

Pieces Your Candelabra Centerpiece includes the following pieces: 2 - Nut Locks

2 - Base Screws

1 - Column Base

2 – Nuts

1 – Washer

1 - Large Column Piece

2 - Small Column Pieces

2 - Small Column Lids

2 - Arms

4 - Small Candelabra Cups

4 - Small Candelabra Screw-in Pedestals

5 - Crystal Platforms

1 - Large Candelabra Bowl

1 - Large Candelabra Pedestal

20 - Crystal Strands

1 - Wrench 1 - Base Cover

Phase One You will need:

• 2 Base Screws • 1 Nut Lock • 1 Washer • 1 Nut • 1 Large Column Piece

Step 1: Screw the 2 Base Screws together with the linking piece.

Step 2: Place the joined Base Screw through the hole of the Column Base.

Step 3: Turn the Base Screw and Column Base upside down, add the Washer, then the Nut Lock. Secure with a Nut.

Step 4: Slide the Large Column Piece over the Base Screw.

Phase Two You will need:

• 2 Arms • 4 Small Candelabra Cups • 4 Small Candelabra Screw-in Pedestals • 4 Crystal Platforms

Step 1: Place a Small Candelabra Screw-in Pedestal upside down so the screw is pointing upward.

Step 2: Put the screw of the Small Candelabra Screw-in Pedestal through the hole in the upside-down Small Candelabra Cup.

Step 3: Stack Crystal Platform upside down over the Small Candelabra Cup with the Small Candelabra Screw-in Pedestal through the center hole in the Crystal Platform.

Step 4: Turn over the pieces you have assembled and secure them to the ends of each Arm by screwing the end of the Small Candelabra Screw-in Pedestal into open end of the Arm.

Phase Three

You will need:

• 2 Small Column Pieces • Small Column Lids • Arms with the assembled Small Candle Cups • Crystal Platform • Large Candelabra Pedestal • Large Candelabra Bowl

Step 1: Thread the following items through the Base Screw in the following order:

A. Column Lid open side up

B. Small Column Piece rounded side DOWN

C. Arms so they form an ‘X’ shape

D. Small Column Piece rounded side UP, Column Lid open side DOWN

E. Crystal Platform

F. Large Candelabra Pedestal

G. Large Candelabra Bowl

Phase Four You will need:

• Base Cover • Nut • Nut Lock • Crystal Strands

Step 1: Secure the Candelabra with a Nut Lock and Nut through the top of the Large Candelabra Bowl.

Step 2: After the Candelabra is secure and stable, cover the open bottom of the Candelabra with the peel-and-stick sticker Base Cover.

Step 3 :Open the rings of the Crystal Strands to hang them through the holes in the Crystal Platforms.

Enjoy! Your Crystal Candelabra is ready to dazzle your decor.