Assemble shackles onto the Jeep with the greasable bolt zerk fittings toward the outside, and the lock nuts on the inside. Tighten the center brace first to 85 ft. lbs., then torque the shackle bolts to 16 ft. lbs. Do not over tighten the shackle bolts! Check torque on the shackle bolts after 100 miles, and re-check periodically after that. Grease with non-synthetic, multi-purpose chassis grease or moly lube. If you have any questions during the installation of this product please contact our technical department at [email protected] or (714) 367-1580. Assemble shackles onto the Jeep with the greasable bolt zerk fittings toward the outside, and the lock nuts on the inside. Tighten the center brace first to 85 ft. lbs., then torque the shackle bolts to 16 ft. lbs. Do not over tighten the shackle bolts! Check torque on the shackle bolts after 100 miles, and re-check periodically after that. Grease with non-synthetic, multi-purpose chassis grease or moly lube. If you have any questions during the installation of this product please contact our technical department at [email protected] or (714) 367-1580.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Assemble shackles onto the Jeep with the greasable bolt zerk fi ttings toward the outside, and the lock nuts on the inside. Tighten the center brace fi rst to 85 ft. lbs., then torque the shackle bolts to 16 ft. lbs. Do not over tighten the shackle bolts! Check torque on the shackle bolts after 100 miles, and re-check periodically after that. Grease with non-synthetic, multi-purpose chassis grease or moly lube.If you have any questions during the installation of this product please contact our technical department at [email protected] or (714) 367-1580.
Assemble shackles onto the Jeep with the greasable bolt zerk fi ttings toward the outside, and the lock nuts on the inside. Tighten the center brace fi rst to 85 ft. lbs., then torque the shackle bolts to 16 ft. lbs. Do not over tighten the shackle bolts! Check torque on the shackle bolts after 100 miles, and re-check periodically after that. Grease with non-synthetic, multi-purpose chassis grease or moly lube.If you have any questions during the installation of this product please contact our technical department at [email protected] or (714) 367-1580.
Related Documents
