ASPET TECHNOPLAST PVT

ASPET TECHNOPLAST

PVT.LTD.

Unique Solution of Young Packaging's…………………….............

M-78,M.I.D.C ,AWDHAN-DHULEMAHARASHTRA-424311

COMPANY PROFILE

Mr. Abhishek S. Agrawal

Managing Director’s

Mr. Shashikant Agrawal

Smt. Asha Devi Agrawal

Aspet technoplast pvt. Ltd. is a manufacturer of the highest quality Pet Preforms , using Husky Technology. Aspet technoplast pvt. Ltd. is a partnership firm incorporated in 2014 .Since its incorporation , the investment in people, processes, research and development with focus on customer needs has resulted in emerging as the preferred supplier of high quality PETS .Aspet technoplast pvt. Ltd. manufacturers PET Preforms specific to packaging of water and beverages of various sizes and shapes using a two stage process which are used in Mineral Water Industry , Carbonated Drinks , Hot & Warm fill , Juices , Edible Oil , and other products .The factory is centrally located at Dhule in north-western part of Maharashtrastate. The location of the factory is connected with NH-3(Mumbai-Agra Highway) & NH-6 Indor (MP), Surat (Gujrat) ,is an advantage for the distribution of finished goods .Aspet technoplast pvt. Ltd. shall enhance living experiences for the society through continues phenomenal growth and planned innovation using state-of-the-art technologies , providing world class PET products .The emphasis is to continuously strive for excellence keeping you the customer in mind delivering value with our products and services to meet your needs . The company aims to set quality standards for the world market by pursuing excellence in manufacturing and delivering products with increased dedication , passion and never say die spirit .

GOALIn Line With the primary goal of the company, ASPET’S strategy is to

invest in innovative and low-cost R&D which creates innovative and smart packaging solutions for the discerning FMCGs industry.

THE COMPANY IS ACTIVITY FOCUSED TO INVEST : in the latest technology to keep up with the latest trends.Better operational efficiencyIn turn providing exceptional economy and value to customers.

We are also committed to the environment and to the future of our planet. In sync with our commitment, the company is actively investing in wind and solar energy to harness renewable sources of energy to the maximum possible extent.

We have passion for innovation and new ideas

JUICES,TEAS,BEVERAGES,WATERS etc.

HOT FILL

COLD FILL

WE ARE YOUNG BUT ENERGATIC AND PERSISTANT

WE CAN OFFER-:

QUALITY

INTRINSIC VISCOCITY DETERMINES THE STRENGTH OF THE FINALLY SHAPED BOTTELS.

PHYSICAL TESTING MEASURMENTS OF DIMENSIONS (LENGTH,DIAMETERS,WALL THICKNESS,WEIGHT ETC.)

VISUAL AND AUTOMATIC CONTROL INSPECTION OF THE APPEARANCE OF OUR PREFORM

COLOUR WIDE RANGE OF COLOURED PREFORMS ARE PRODUCED WITHIN NARROW COLOUR TOLLERANCE.

MICROBIOLOGICAL IDENTIFICATION TESTS

CHECK OF CHEMICAL TRACES

We Aspet Technoplast :

a reputed manufacturer of Pet Preforms shall demonstrate our Commitment to :

Implementation of Quality and Food safety Management system including adherence of Legal and Customer’s requirements

Monitoring and recording of all aspects of these systems including objectives Preventing and minimising the likelihood of generating Food safety incidents by

continuously improving its own performance in terms of Food safety and the analysis of every Incident or Potentially unsafe Food Hygiene related event, to avoid their repetition, if possible.

Reviewing the system on a regular basis so that if any part of Process changes , the Quality and Food safety Management System is adjusted accordingly

Initial induction and ongoing training of all staff related to operation commensurate with their duties and responsibilities We shall always be on the Cutting edge technology of international standard of Quality and food safety and our employees shall be Fully Committed to this Journey of Compliance and Continual improvement of Management system so that the Ownership is with each one of us.

VISIONTO BE A LEADING

PREFORM MANUFACTURER ,

BUILDING LONG TERM RELATIONSHIPS

GLOBBALLY

Our Objectives are:

To improve customer feedback To decrease the non conforming

product ( rejection) percentageTo improve machine availability hours Nil Food safety related incidents ,

Product recall No deviation in verification plan of

HACCP

PRODUCT INFORMATION

PET Resin is used to produce PET Preforms, which are then used to blow PET bottles using high pressure and bi-oriented 'process. PET is food grade plastic and is approved worldwide as being a safe medium of bottling beverages.Blow moulding is the process of inflating a hot, hollow, thermoplastic preform or parison inside a closed mold so its shape conforms to that of the mould! cavity. A wide variety of hollow parts, including plastic bottles , can be produced from many different plastics using this process.There are three basic blow moulding processes:Stretch Blow Moulding; . Injection Blow Moulding; . Extrusion Blow Moulding,

PET Preforms are manufactured using a process called Injection Moulding . In the injection blow molding process, tha material is injection moulded. The hot material, still on the core pin, is then indexed 'to the blow moulding station where it is blown into a bottle and allowed to cool. For processing PET it is critical that this core pin be cooled. The bottle is then indexed to the next station and ejected'.

Injection blow moulding allows more precise detail in the neck and finish (threaded) area than extrusion blow moulding.This process involves the Preforms to be heated below 90oC using infrared heater.

Upcoming Product’s...

We are launching soon…..

Through the use of a blow mould that is rotating and under extreme high pressure (about 40 bar) the Preforms are transformed into PET bottles of specific size, shape and dimension. If required, approved master batch colorant is added to produce different colours of PET bottles.

Thanking You!

ASPET TECHN

OPLAST PVT. LTD. WE ARE DEVOTED TO QUALITY,QUANTITY,PURITY&SURITY

Prepared by-:Neetesh K Dwivedi