AS/NZS 1554.6:2012 Welder Qualification Tran Van Nhieu (Welder ID: TN) Has successfully completed welding of test coupons Date: 21 December 2016 Has completed the welding test and qualifications in accordance with the requirements of AS/NZS 1554.6:2012 for Fillet Weld 5 mm (single-run) in horizontal position by GTAW WQR-SS 316-GTAW-Fillet Weld 5 mm-001-TN PQR-SS 316-GTAW-Fillet Weld 5 mm-001 (Fillet Sizes Qualified ≤ 5 mm) Laboratory Report No. LS16-0955-01 TN-WQR Fillet Weld 8 mm (Multi-run) F1 – by GTAW Process in PB (2F) Horizontal Position WQR-SS 316-GTAW-Fillet Weld 8 mm-002-TN PQR-SS 316-GTAW-Fillet Weld 8 mm-002 (Fillet Sizes Qualified ≥ 8 mm) Laboratory Report No. LS16-0955-02 TN-WQR Partial Penetration Butt Weld (PPBW) between 6 mm thick plates in 2G (PC) position by GTAW process WQR-SS 316-GTAW-Butt Weld (PPBW)-003-TN PQR-SS 316-GTAW-Butt Weld (PPBW)-003 (Thickness range qualified: 1.75 mm – 7 mm) Laboratory Report No. LS16-0955-03 TN-WQR Partial Penetration Butt Weld (PPBW) between 12 mm thick plates in 2G (PC) position by GTAW process WQR-SS 316-GTAW-Butt Weld (PPBW)-004-TN PQR-SS 316-GTAW-Butt Weld (PPBW)-004 (Thickness range qualified: 4 mm – 16 mm) Laboratory Report No. LS16-0955-04 TN-WQR Complete Penetration Butt Weld (CPBW) between 6 mm thick plates in 2G (PC) position by GTAW process WQR-SS 316-GTAW-Butt Weld (CPBW)-005-TN PQR-SS 316-GTAW-Butt Weld (CPBW)-005 (Thickness range qualified: 3 mm – 12 mm) Laboratory Report No. LS16-0955-05 TN-WQR Tack and intermittent 5 mm fillet weld (single-run) in horizontal position by GTAW WQR-SS 316-GTAW-Intermittent Fillet Weld 5 mm-007-TN PQR-SS 316-GTAW-Intermittent Fillet Weld 5 mm-007 (Fillet Sizes Qualified ≤ 5 mm) Laboratory Report No. LS16-0955-07 TN-WQR The test coupons were examined and tested and satisfied the acceptance criteria in accordance with the requirements of AS/NZS 1554.6:2012 using the above welding procedure specifications ----------------------------------------------------------------------------- Sasanka Sinha Technology Manager MTech MEPrac (MW&J) MIEAust CPEng RPEQ IWE Welding Technology Institute of Australia Research, Educational, Technical Support & Information ABN 69 003 696 526 PO Box 6165, Silverwater NSW 1811 Ph: +61 (02) 8748 0100 Fax: +61 (02) 8748 0181 Visit our webpage: www.wtia.com.au
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
AS/NZS 1554.6:2012 Welder Qualification
Tran Van Nhieu (Welder ID: TN)
Has successfully completed welding of test coupons
Date: 21 December 2016
Has completed the welding test and qualifications in accordance with the requirements of AS/NZS
1554.6:2012 for
Fillet Weld 5 mm (single-run) in horizontal position by GTAW WQR-SS 316-GTAW-Fillet Weld 5 mm-001-TN PQR-SS 316-GTAW-Fillet Weld 5 mm-001 (Fillet Sizes Qualified ≤ 5 mm) Laboratory Report No. LS16-0955-01 TN-WQR
Fillet Weld 8 mm (Multi-run) F1 – by GTAW Process in PB (2F) Horizontal Position WQR-SS 316-GTAW-Fillet Weld 8 mm-002-TN
PQR-SS 316-GTAW-Fillet Weld 8 mm-002 (Fillet Sizes Qualified ≥ 8 mm) Laboratory Report No. LS16-0955-02 TN-WQR
Partial Penetration Butt Weld (PPBW) between 6 mm thick plates in 2G (PC) position by GTAW process
WQR-SS 316-GTAW-Butt Weld (PPBW)-003-TN PQR-SS 316-GTAW-Butt Weld (PPBW)-003 (Thickness range qualified: 1.75 mm – 7 mm) Laboratory Report No. LS16-0955-03 TN-WQR
Partial Penetration Butt Weld (PPBW) between 12 mm thick plates in 2G (PC) position by GTAW process WQR-SS 316-GTAW-Butt Weld (PPBW)-004-TN PQR-SS 316-GTAW-Butt Weld (PPBW)-004 (Thickness range qualified: 4 mm – 16 mm) Laboratory Report No. LS16-0955-04 TN-WQR
Complete Penetration Butt Weld (CPBW) between 6 mm thick plates in 2G (PC) position by GTAW process WQR-SS 316-GTAW-Butt Weld (CPBW)-005-TN PQR-SS 316-GTAW-Butt Weld (CPBW)-005 (Thickness range qualified: 3 mm – 12 mm) Laboratory Report No. LS16-0955-05 TN-WQR
Tack and intermittent 5 mm fillet weld (single-run) in horizontal position by GTAW
WQR-SS 316-GTAW-Intermittent Fillet Weld 5 mm-007-TN PQR-SS 316-GTAW-Intermittent Fillet Weld 5 mm-007 (Fillet Sizes Qualified ≤ 5 mm) Laboratory Report No. LS16-0955-07 TN-WQR
The test coupons were examined and tested and satisfied the acceptance criteria in accordance with the requirements of AS/NZS
1554.6:2012 using the above welding procedure specifications
----------------------------------------------------------------------------- Sasanka Sinha
Technology Manager MTech MEPrac (MW&J) MIEAust CPEng RPEQ IWE
Welding Technology Institute of Australia Research, Educational, Technical Support & Information
ABN 69 003 696 526 PO Box 6165, Silverwater NSW 1811 Ph: +61 (02) 8748 0100 Fax: +61 (02) 8748 0181
Visit our webpage: www.wtia.com.au
AS/NZS 1554.6:2012 Welder Qualification
Nguyen Van Len (Welder ID: NL)
Has successfully completed welding of test coupons
Date: 21 December 2016
Has completed the welding test and qualifications in accordance with the requirements of AS/NZS
1554.6:2012 for
Fillet Weld 5 mm (single-run) in horizontal position by GTAW WQR-SS 316-GTAW-Fillet Weld 5 mm-002-NL PQR-SS 316-GTAW-Fillet Weld 5 mm-001 (Fillet Sizes Qualified ≤ 5 mm) Laboratory Report No. LS16-0955-02 NL-WQR
Partial Penetration Butt Weld (PPBW) between 6 mm thick plates in 2G (PC) position by GTAW process WQR-SS 316-GTAW-Butt Weld (PPBW)-003-NL
PQR-SS 316-GTAW-Butt Weld (PPBW)-003 (Thickness range qualified: 1.75 mm – 7 mm) Laboratory Report No. LS16-0955-03 NL-WQR
Partial Penetration Butt Weld (PPBW) between 12 mm thick plates in 2G (PC) position by GTAW process WQR-SS 316-GTAW-Butt Weld (PPBW)-004-NL PQR-SS 316-GTAW-Butt Weld (PPBW)-004 (Thickness range qualified: 4 mm – 16 mm) Laboratory Report No. LS16-0955-04 NL-WQR
Tack and intermittent 5 mm fillet weld (single-run) in horizontal position by GTAW WQR-SS 316-GTAW-Intermittent Fillet Weld 5 mm-007-NL PQR-SS 316-GTAW-Intermittent Fillet Weld 5 mm-007 (Fillet Sizes Qualified ≤ 5 mm) Laboratory Report No. LS16-0955-007 NL-WQR
The test coupons were examined and tested and satisfied the acceptance criteria in accordance with the requirements of AS/NZS 1554.6:2012 using the above welding procedure specifications
-----------------------------------------------------------------------------
Sasanka Sinha Technology Manager
MTech MEPrac (MW&J) MIEAust CPEng RPEQ IWE Welding Technology Institute of Australia
Research, Educational, Technical Support & Information ABN 69 003 696 526 PO Box 6165, Silverwater NSW 1811
Ph: +61 (02) 8748 0100 Fax: +61 (02) 8748 0181 Visit our webpage: www.wtia.com.au
AS/NZS 1554.6:2012 Welder Qualification
Le Tu Luc (Welder ID: LL) Has successfully completed welding of test coupons
Date: 30 November 2016
Has completed the welding test and qualifications in accordance with the requirements of AS/NZS
1554.6:2012 for Fillet Weld 6 mm (single-run) in horizontal position by GMAW
PQR-SS 316-GMAW-Fillet Weld 6 mm-008 (Fillet Sizes Qualified ≤ 6 mm) Laboratory Report No. LS16-0955-08 LT-WPQR
Fillet Weld 8 mm (Multi-run) F1 – by GMAW Process in PB (2F) Horizontal Position PQR-SS 316-GMAW-Fillet Weld 8 mm-009 (Fillet Sizes Qualified ≥ 8 mm) Laboratory Report No. LS16-0955-09 LT-WPQR
Partial Penetration Butt Weld (PPBW) between 6 mm thick plates in 2G (PC) position by GMAW process
PQR-SS 316-GMAW-Butt Weld (PPBW)-010 (Thickness range qualified: 2.25 mm – 9 mm) Laboratory Report No. LS16-0955-10 LT-WPQR
Partial Penetration Butt Weld (PPBW) between 12 mm thick plates in 2G (PC) position by GMAW process PQR-SS 316-GMAW-Butt Weld (PPBW)-011 (Thickness range qualified: 4.5 mm – 18 mm) Laboratory Report No. LS16-0955-11 LT-WPQR
Complete Penetration Butt Weld (CPBW) between 6 mm thick plates in 2G (PC) position by GMAW process PQR-SS 316-GMAW-Butt Weld (CPBW)-012 (Thickness range qualified: 3 mm – 12 mm) Laboratory Report No. LS16-0955-12 LT-WPQR
Complete Penetration Butt Weld (CPBW) between 12 mm thick plates in 2G (PC) position by GMAW process
PQR-SS 316-GMAW-Butt Weld (CPBW)-013 (Thickness range qualified: 6 mm – 24 mm) Laboratory Report No. LS16-0955-13 LT-WPQR
Tack and intermittent 6 mm fillet weld (single-run) in horizontal position by GMAW PQR-SS 316-GMAW-Intermittent Fillet Weld 6 mm-014 (Fillet Sizes Qualified ≤ 6 mm) Laboratory Report No. LS16-0955-14 LT-WPQR
The test coupons were examined and tested and satisfied the acceptance criteria in accordance with the requirements of AS/NZS 1554.6:2012 using the above welding procedure specifications
-----------------------------------------------------------------------------
Sasanka Sinha Technology Manager
MTech MEPrac (MW&J) MIEAust CPEng RPEQ IWE Welding Technology Institute of Australia
Research, Educational, Technical Support & Information ABN 69 003 696 526 PO Box 6165, Silverwater NSW 1811
Ph: +61 (02) 8748 0100 Fax: +61 (02) 8748 0181 Visit our webpage: www.wtia.com.au
Related Documents
