INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-1 7 ASIC VENDOR DIRECTORY Company Services Offered Area(s) of Specialization Technologies Process Training Offered? Source: Integrated System Design 22784 Core-based design integration and implementation into silicon Digital and Analog ASICs, mixed-signal, FPGA, board design, system, and PCI design ASIC, FPGA, DSP, and system design ASIC, DSP, and full- custom design Full chip design, layout and Dracula programming Product design, modeling, validation, methodology, tool interfaces, & communications hardware design ASIC, FPGA, and reconfigurable computing design feasibility studies, and FPGA to ASIC migration FPGA, ASIC, custom IC, mask design and verification, board design, software, and systems ASIC, FPGA, and design process consulting ASIC ASIC, FPGA, system, board design, software, firmware, full turnkey, and custom layout Acclaim Technology, Design Services Group San Jose, CA Advanced Designs Colorado Springs, CO Advanced Digital Designs Chicago, IL Advanced Microelectronics Jackson, MS Advanced Silicon Technology Harbor City, CA Alta Group of Cadence Design Systems Sunnyvale, CA Annapolis Micro Systems Annapolis, MD APK Engineering Agoura Hills, CA Arisix San Jose, CA Arizona Microtek Mesa, AZ ASIC Designs Naperville, IL Cores, COT, DFT, technology migration, simulation, synthesis, verification, IC place and route Analog, digital, and PCI cards Communications, audio, video, and forward- error correction Analog, digital, mixed-signal, video, audio, power, graphics, disk drive, and networks Analog, digital, and high-density full-custom layout and design Communications and network hardware design, and multimedia Analog, digital, mixed-signal ASIC, full custom, standard cell, gate array, custom cell design/characterization, synthesis, VHDL retargeting, behavioral modeling, Verilog & VHDL DSP, embedded processors, microcontrollers, RF front ends, Verilog, and VHDL ASIC/simulation related tools/scripts, design processes, & test RF, wireless, mixed-signal, PLL, analog, video, fiber, and system cost reductions Analog, mixed-signal, ultra-low power, video, telecommunications, networking, ATE, ULSI, and RF Gate array & standard cell Bipolar & CMOS CMOS, ECL & GaAs BiCMOS, bipolar, & CMOS BiCMOS, bipolar, & CMOS BiCMOS, bipolar, CMOS, & GaAs BiCMOS, bipolar, & CMOS Bipolar, CMOS, & GaAs CMOS BiCMOS, bipolar, CMOS, & SOI BiCMOS, Bipolar RF, EEPROM, CMOS, & GaAs Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Sampling of Third Party Design Consultants
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-1
7 ASIC VENDOR DIRECTORY
Company Services Offered Area(s) of SpecializationTechnologies
Analog/RF, digital, mixed-signal,networking and communications,computing, consumer, processors,controllers, memory devices, peripherals,multimedia, and test
IC CAD Tools, multi-vendor,methodologies, and libraries
PCI, graphics, large designs, technologytranslation, efficient design-flows
Process characterizationand interconnect modeldevelopment.Interconnect parasiticextraction calibration
Microprocessors, microcontrollers, graphicprocessors, DSPs, legacy processorscomplex virtual system prototyping,verification, and parallel processing
Standard cell and full custom layout—mixed-signal/digital/memories/microprocessors, CAD services-chipverification, debug for Vericheck, Dracula,and Diva
High-speed networks, set top box referencedesign, test equipment, digital and analog
Custom Verilog & VHDL soft core design,multimedia development and test systems.IRD and cable modem design/customization, & production test fixturesfor set-top box systems
Mixed-signal, biomedical, and telecom-munications, and data communications
Wired and wireless communications, DSP,multimedia, semiconductors, andembedded system cores, memories, andlibraries
Planning, evaluation, and deployment oflibraries, tools, and design data flows
Analog, mixed-signal low-voltage CMOSdesign with embedded and non-volatilememory
Design methodologyconsulting and deployment.HDL and high-level designtraining. Consulting in ASIC,FPGA, DSP, and large scalesystem/board design andverification
ASIC
Prototyping of complex ASICdesigns onto multiple FPGAdevices, custom prototypedevelopment, and systemverification
Full ASIC design servicesincluding top-down, systemlevel using VHDL, Verilog,and synthesis
Staffing and mask designconsulting
Analog and mixed-signal design—RF ID/Smart cards, sensor interface, CADservices—chip verification debug & DRC/LVS rule sets for Vericheck, Dracula, Diva,& ICED
Analog & mixed-signalintegrated circuit design &development fromspecification & delivery
Full custom, standard cell/gate array ASIC, analog,board design, FPGA, systemarchitecture definition &modeling, embeddedsoftware, & test vectordevelopment
Digital/analog IC designservices & technologylicenses. Full custom,standard cell, gate array,libraries, & cores. Authorizeddesign center for IBMMicroelectronics, Lucent, andLSI Logic
Design verification of ASIC,FPGA, DSP, system, boarddesign, other
ASIC, FPGA, system boarddesign, DSP, PCB, militaryand commercial standards
Gate arrays and standardcell, SPEC to tapeout,architecture and logic design,Verilog, synthesis, design forvisibility, power analysis &low-power techniques
Firefighting, complex turnkeyASIC, semi-custom IC,concept to silicon productdesign, foundry sourcing& interface, simulation, test,VHDL & Verilog, and more
Circuit and system design,product development &prototyping, schematiccapture, PCB layout & layoutsimulation, fabrication,assembly, and kitting
Mixed-signal, low power, analog, RFcommunications, and high voltage
P.O. Box 3453 Web Site: www.amd.comSunnyvale, CA 94088-3453 Contact: Gordan Hans
Title: Strategic Marketing EngineerProducts: PLDs
ASIC Vendor Type: Manufacturer
Company Philosophy:Manufacture the fastest, highest performance, most feature rich programmable logic devices inlow to mid density. Be the speed technology leader in this market.
Company Philosophy:Be the preeminent supplier of programmable silicon solutions to the electronics industrythrough product leadership, excellent value, and superior quality and service. Emphasis on theMAX 7000, MAX 8000, FLEX 9000, and FLEX 10K programmable logic families. FLEX 10K is thefirst Embedded Programmable Logic family.
Pocatello, ID 83201 Web Site: www.amis.comContact: Tamera Drake
Title: ASIC Product MarketingProducts: CMOS Gate Arrays, Mixed-Signal Standard
Cells, and PEEL Array DevicesASIC Vendor Type: Manufacturer
Company Philosophy:AMI provides a full range of gate array, standard cell, and mixed-signal ASICs, mixed-signaland digital ASIC design software and services, and modular foundry services. AMI's productsare supported with a library of more than 500 digital cells and megacells.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
AMI6G Series CMOS 0.6 3/2 2,000-800,000 44-736 0.14 2.7 Yes naAMI8G Series CMOS 0.8 3/2 5,300-658,000 68-732 0.20 3.2 Yes na
GDx Series CMOS 1.0 3/2 1000-150,000 40-440 0.39 3.6 Yes na
Company Philosophy:Emphasis on high-performance ECL and logic arrays, custom circuits, and ASSPs. Continuedhigh service level through comprehensive CAE/CAD tools, custom macros, quick-turn design,and package flexibility.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
Q20000 BipolarTrench
Isolation
1.0 3 Metal 500-19,000 28-198 0.09 0.5 Yes No
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
MicroPower BipolarTrench
Isolation
1.0 3 Metal 0.04 0.056 No No
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Name: ASPEC Technology, Inc. Telephone: (408) 774-2199Address: 830 East Arques Ave. Fax: (408) 522-9450
Sunnyvale, CA 94086 Products: Gate Arrays and Standard Cell LibrariesASIC Vendor Type: ASIC Technology Supplier
Company Philosophy:ASPEC Technology, Inc. is a pioneer and leader in providing Open Design ImplementationTechnology (DIT) to ASIC vendors, IC companies and systems houses. Open DesignImplementation provides a standard, open link between design automation and siliconmanufacturing. Although many semiconductor companies have proprietary DIT, ASPECpromotes and leads the category for open DIT tools. ASPECÕs Open DIT is based upon itspatented High Density (HD) architectures and has been adopted by major semiconductorcompanies, including industry leaders such as IDT, National Semiconductor, Samsung, andWinbond.
ASPECÕs Products and ServicesASPECÕs business model is uniquely focused in the DIT space. Therefore, unlike othercompetitors who try to offer both DIT and EDA offerings, ASPECÕs products and services aretargeted to solve customer issues within the DIT area.
• HDA architecture licensing:ASPEC provides a range of HD Architecture for gate arrays, standard cells and embeddedarrays that have been proven in more than 500 design. These benchmark winningarchitectures deliver 27% to 60% higher density than competitive architectures with up to50% lower power consumption and up to 15% higher performance. ASPECÕs patentedtechnology has been licensed to more than 30 processes and four generations of processtechnologies ranging from 0.8µm to 0.35µ technology with a path to 0.1µ.
¥ Libraries & design kits: ASPECÕs physical libraries and design kits provide support for theHD architecture family. Libraries support synthesis, simulation and layout and theyinterface with major third-party EDA tools and silicon manufacturers. ASPEC also providesfront- and back-end libraries targeted for ASIC manufacturing, including gate arraymasterslices and macrocell characterization tools. Customers can purchase existing librariesand kits from ASPEC, and if requested ASPEC can develop a new, customer specific designkit within 45 days.
• Design portability: ASPEC can reduce IC process porting to hours with their layout-levelporting software, QuickPort. QuickPort solves the time-to-volume and silicon cost issue byporting the IC design at the layout level to the target process, and optimizing for the targetprocess parameters. In less than one hour per 100,000 gates, QuickPort produces a newlayout for the design team to verify timing and quickly go to production.
ASIC Vendor Directory
7-24 INTEGRATED CIRCUIT ENGINEERING CORPORATION
ASPEC Technology, Inc. (continued)
• Design software: ASPEC supports all popular EDA software products allowing theircustomers to continue working in existing, productive environments. ADVER Pro is the keyto this interface, providing design modeling and management software that links EDA andDIT.
• Design services: ASPEC is committed to providing excellent customer design assistance
from start-to-finish. ASPEC takes on more than 20 designs each year, requiring that theirengineers have a thorough knowledge of all EDA tools and foundries specified by theircustomers.
San Jose, CA 95131 Web Site: www.atmel.comContact: Jeff Katz
Title: Vice President of MarketingProducts: Gate Arrays and Programmable
Logic Devices, Standard Cell ASICsASIC Vendor Type: Manufacturer
Company Philosophy:Atmel offers high density, high speed gate arrays and embedded arrays in 0.35µm, 0.5µm and0.6µm CMOS technology. Coupled with AtmelÕs extensive library of macrocells, memory, andI/O, these gate arrays offer customers digital system-on-a-chip capabilities. AtmelÕs gate arrayfamilies provide quick time to market solutions.
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
VHDL/Verilog-HDL Model Tech, Synopsys, Mentor Sun, HP 15-200 2-8 na naNetlist and Vectors Cadence
SynopsysMentor
ViewlogicVeribest
Sun, HPSun, HPSun, HP
Sun, HP, PCSun, PC
15-200 2-8 na na
Floor Planning High Level Design Sun, HP 15-200 2-8 na na
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-27
Name: Austria Mikro Systeme Telephone: +43 3136 500 277International AG Fax: +43 3136 500 491
Address: Schloss Premst�tten Contact: Dr. Conrad HeberlingA-8141 Unterpremst�tten Title: Corporate Communications ManagerAustria Products: ASICs
ASIC Vendor Type: Manufacturer
Company Philosophy:Austria Mikro Systeme International AG, or AMS, specializes in the development andproduction of ASICs. The company provides a continuum of custom and semicustomMOS/VLSI capabilities, including full custom circuits, standard cells, and high performanceanalog and digital cells in CMOS and BiCMOS technologies. AMS offers its customers itsintegrated design environment facility and its full in-house silicon foundry service. AMS' "allunder one roof" strategyÑresearch and development, design engineering, mask lithography,wafer fabrication, assembly and testÑhas placed the company in a strong position within themarket segments telecommunications, automotive, and industrial electronics. All AMS qualityassurance activities are based upon ISO 9001 since AMS holds the European CECC 90 000certification. Austria Mikro Systeme has participation in SAMES (South African Micro-Electronic Systems) and in Thesys Gesellschaft f�r Mikroelektronik in Germany - both ASICspecialists. The strategy of the Group, under the slogan Òvertical globalÓ,(i.e., to work andcommunicate in the same time zone and therefore to be present for the customer), provides theAMS Group with the possibility of opening additional markets in Europe and other continentsand to utilize its know how worldwide.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
BAE BiCMOS 1.2 2 Metal RAM, ROM-Generators 0.22 Yes NoneBYB BiCMOS 0.8 2 Metal 3.0 GHz 0.18 Yes NoneBYE BiCMOS 0.8 2 Metal 2.0 GHz 0.18 Yes NoneCAB CMOS 1.2 2 Metal Analog-Lib, Filters, A/D and D/A
Converters, RAM, ROM-Generators0.25 Yes None
CAE CMOS 1.2 2 Metal " 0.25 Yes NoneCAQ CMOS 1.2 2 Metal High Resitive Poly 0.25 Yes NoneCBB CMOS 2.0 2 Metal Analog-Lib, Filters, A/D and D/A
Converters, RAM, ROM-Generators0.35 Yes None
CBD CMOS 2.0 2 Metal " 0.35 Yes NoneCBE CMOS 2.0 2 Metal " 0.35 Yes NoneCBF CMOS 2.0 2 Metal " 0.35 Yes NoneCBH CMOS 2.0 2 Metal " 0.35 Yes NoneCBM CMOS 2.0 1 Metal " 0.35 Yes NoneCBO CMOS 2.0 2 Metal " 0.35 Yes NoneCBQ CMOS 2.0 2 Metal High Resitive Poly 0.35 Yes NoneCBR CM OS 2.0 2 Metal Analog-Lib, Filters, A/D and D/A
Converters, RAM, ROM-Generators0.35 Yes None
CBS CMOS 2.0 2 Metal " 0.35 Yes NoneCBT CMOS 2.0 2 Metal Max 50V 0.35 Yes NoneCBY CMOS 2.0 2 Metal " 0.35 Yes NoneCBZ CMOS 2.0 2 Metal " 0.35 Yes NoneCUB CMOS 0.6 2 Metal " 0.16 Yes NoneCYB CMOS 0.8 2 Metal RAM, ROM-Generators 0.18 Yes NoneCZB CMOS 1.0 2 Metal " 0.2 Yes NoneCZE CMOS 1.0 2 Metal " 0.2 Yes None
ASIC Vendor Directory
7-28 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Austria Mikro Systeme (continued)
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Company PhilosophyChip Express provides the electronics industry with comprehensive ASIC services featuring theTime-to-Market Solution¨. The companyÕs product, called LPGA (Laser Programmable GateArray), is a silicon customized gate array fabricated with a patented technology. The LPGAdelivers true ASIC performance with a seamless migration path from one day prototypes to oneweek low volume/pre-production and one month high volume production.
Chip Express has developed a series of unique capabilities that allow customization of gatearrays outside of conventional fabs, enabling fast turn-around, significant flexibility, riskreduction, and competitive production cost. LPGAs are produced employing a patenteddisconnect methodology, where the base wafers are fabricated with all interconnection layersfully completed. Chip ExpressÕ proprietary techniques are used to selectively remove specificmetallization points to personalize the arrays. Rapid prototyping service is provided utilizingthe proprietary QuICk¨ laser micro-machining system to personalize one die at a time, in acouple of hours. The low volume/pre-production is provided using the OneMask¨ technologyto personalize a single wafer at a time. Cost-effective mass production is provided by usingTwoMaskª personalization technology at conventional fabs.
Chip Express services leading edge communications, computer, and military customers such as3Com, Hewlett-Packard, Intel, IBM, National Semiconductor, Xerox, Hughes, and Boeing.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW/Gate/MHz)
MilitaryTemperature
Range
Second Source
QYH500 CMOS 0.8 2 Metal 80,000 396 0.35 NA Yes YamahaCX2000 CMOS 0.6 3 Metal 200,000+
Products: Semi- and Full-Custom ASICs(development and production)
ASIC Vendor Type: Supplier, Design House
Company Philosophy:CROSSMOS offers its customers all services from development to production in a high qualitystandard and on time. CROSSMOS has a minimal overhead and therefore ensures flexibility,versatility, and lower costs.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
Metal Gate 6 1 15-655 13-69 15 300 No YesSAC MOS 2 1 240-1530 16-28 1.5 300 No Yes
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Company Philosophy:Provide the world's fastest programmable logic products in the widest range of densities.Provide unparalleled support for these products with Warp2 and Warp3 Ñ the world's firstvendor supplied, open, VHDL design tools. Maintain market leadership in both the 22V10 andfastest growing CPLD segments.
F-92214 Saint Cloud Contact: Yves Le GoffFrance Title: Director, Sales and Marketing
Products: MicroelectronicsASIC Vendor Type: Third Party Design House
Company Philosophy:To be the major European design and system house in microelectronics from ASICs to MCMsand packaging through MMICs, MMCMs, and CAD tools.
Dassault Electronique has broad capabilities for system and circuit design. In its dual capacityas state-of-the-art equipment manufacturer and multitechnology systems developer, DassaultElectronique offers full-spectrum services including: systems analysis, systems miniaturization,parallel design of ASICs, MCMs, and PCBs, design of digital, analog, or hybrid circuits, CADand testability support, packaging design, engineering, and testing under severe environmentalconditions (safety, EMI, shock, vibration, temperature, radiation).
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
ASIC Vendor Type: Supplier, Third Party Design House
Company Philosophy:Dectroswiss Electronic Design designs, tests, and supplies ASICs. The company specializes inmixed-mode circuits and switch capacitors design (filters); low-power, low voltage CMOSASICs with EEPROM; and analog/digital test systems with micromanipulator. Dectroswiss is adesign company and an ASIC-contractor, the customer decides what it needs.
Whitehill Way Contact: Gary DuncanSwindon SN5 6PJ Title: VP, MarketingWiltshire Products: Mixed-Mode ASICsUnited Kingdom ASIC Vendor Type: Supplier
Company Philosophy:Design and supply of analog and digital ASICs, specializing in sensor signal processing, audioand video processing, personal communications, for the automotive, communications, andindustrial markets. Dialog Semiconductor is a member of the semiconductor division of TEMIC.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
2 InputNand-Gate
Power(µW/MHz/Gate)
MilitaryTemperature
Range
SecondSource
CMOS 3.0 2 + 1 Analog and Digital 2.4 5 Yes VariousCMOS 1.2 2 + 1 Analog and Digital 0.6 2.4 Yes VariousCMOS 0.7 2 + 1 Analog and Digital 0.4 1.5 Yes VariousCMOS 0.35 3 + 1 Analog and Digital 0.1 1 Yes Various
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
B.P. 65 E-mail: [email protected] Meylan CEDEX Contact: Michel DepeyrotFrance Title: President
Products: Standard Cells, Circuitware IC DesignASIC Vendor Type: Supplier, Third Party Design House
Company Philosophy:Develops and promotes synthesizable and generatable CIRCUITWAREª and uses and sellsmultifoundry-portable cell library and simulation models on simulator SMASHª, seamlesslymixed-mode and multilevel.
HARD, FIRM, AND SOFT MACROCELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
MOCOD CMOS 0.5, 0.35 3 Analog front end for FAX and Modems na 20 @ 3.3V Yes MultipleCOREV CMOS 0.5, 0.35 3 Multimedia CODEC na 80 @ 3.3V Yes MultipleLPCOD CMOS na 2 Ultra Low Power CODEC na 0, 1 na MultipleFAPLL CMOS na 2 High Speed PLL na na na MultipleHDLC CMOS any any VHDL, synthesizable, RTL model na na Yes Multiple
UART/DMA CMOS any any Ò na na na MultipleRAG-TIME CMOS 0.5, 0.35 3+ SRAM/ROM/DRAM Generator na na Yes Multiple
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Design Works, Synario Cadence, Compass SMASHª, SHAKER na na na naProtel Client/Server id na na na na
ASIC Vendor Directory
7-40 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: EASICS N. V. Telephone: +32 16 395 611Address: Interleuvenlaan 86 Fax: +32 16 395 619
Company Philosophy:Easics is an independent ASIC design company, using a design methodology based on VHDLand logic synthesis. The design can be targeted to different ASIC technologies or can beprototyped in a FPGA or a LPGA.
EasicsÕ know-how is based on a unique combination of VHDL design experience and system-level expertise in domains such as telecommunications (ATM, SDH, SONET) and digital signalprocessing.
EasicsÕ designs digital ASICs, starting from a functional requirements specification of the device,and transfers a testable netlist to the customer or to the foundry for back-end work.
Easics verifies the design by performing timing analysis on the backannotated netlist. Currently,Easics is focusing on issues for design reuse. For this reason, Easics is now a member of the VSIalliance.
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-41
Name: Electronic Technology Corp. Telephone: (515) 296-7000Address: 2501 N. Loop Dr. Fax: (515) 296-7001
ISU Research Park Contact: Kathy VitzthumAmes, IA 50010-8284 Title: Marketing Coordinator
Products: CMOS Analog ArraysASIC Vendor Type: Supplier
Company Philosophy:Design and manufacture low voltage and low power mixed analog/digital/EEPROM ICs.Supply of standard watch and clock chips, power surveillance, and LCD driver standard parts.ICs operate down to 1.2 volts.
80992 Munich Contact: Peter NeugebauerGermany Title: Engineering Manager
Products: CMOS Digital Gate Arrays andStandard Cells
ASIC Vendor Type: Supplier
Company Philosophy:Epson Europe Electronics GmbH is the European subsidiary of Seiko Epson Corp.'sSemiconductor Operation Division. Its mission is to ensure total customer satisfaction throughthe supply of all the necessary services, support, training, and tools from the very first pre-salescontact to mass production of ASIC devices.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
SLA100X CMOS 2.0 2 1600-8000 Up to 178 3.0 (3V) 1 No naSLA9000 CMOS 1.0 2 4000-33,000 Up to 240 0.55 (5V) 6 No na
SLA9000 Plus CMOS 1.0 2 9000-37,000 Up to 256 0.55 (5V) 6 No naSLA20000 CMOS 0.65 2,3 12,500-200,000 Up to 240 0.28 (5V) 3 No na
SLA20000 Plus CMOS 0.65 2 4000-46,000 Up to 208 0.28 3 No naSLA30000 CMOS 0.6 2,3 18,500-216,000 Up to 392 0.25 2.5 No naSLA40000 CMOS 0.45 2,3 28,000-400,000 Up to 480 0.19 (3.3V) 2.0 No naSLA9000F CMOS 1.0 2 2,800-44,000 Up to 256 0.3 (5V) 6.0 No na
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
SSC2000 CMOS 2.0 2 Analog Library, Ultra Low PowerOscillators
3.0 (3V) 1 No na
SSC2500 CMOS 1.6 2 Low-Power Oscillators 2.5 (3V) 0.5 No naSSC5000 CMOS 0.8 2 Multiplier 4-32 by 4-32, RAM, ROM,
FIFO, 82xx comp. cells0.28 (5V) 5 No na
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Netlist PC 386/486, SunSPARC,LADSnet (Espon proprietary),Mentor, Cadence, Synopsys,
Science-Based Industrial Park Contact: K.C. ShihHsinchu, Taiwan Title: President
Products: CMOS ASICs in Gate Array and StandardCells
ASIC Vendor Type: Supplier, Design Service ASIC library license
US Subsidiary: ASIC Semiconductor IntÕl. Corp. Telephone: (408) 235-8888Address: 3255-4 Scott Blvd., Suite # 103, Fax: (408) 235-8889
Santa Clara, CA 95054 Contact: K.C. Shih
Company Philosophy:Fully utilizing TaiwanÕs manufacturing capability, Faraday Technology is committed to providingcustomers with high-quality, on-time, and low cost ASIC solutions.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
FG6000A CMOS 0.6 2/3 Metal Up to 200,000 Up to 296 0.25 na No NoFG8000A CMOS 0.35 3/4 Metal Up to 600,000 Up to 620 0.08 na No No
FS7000A CMOS 0.5 2/3 Metal " 0.23 na No NoFS8000A CMOS 0.35 3/4 Metal " 0.08 na No No
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Converted, Netlist, Layout Workstation, PC Cadence, Mentor, Viewlogic,Synopsys, Intergraph, Gate
Ensemble, Cell3
15 and up 3-4 25 and up 6-8
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-47
Name: Fujitsu Microelectronics Inc. Telephone: (408) 922-9000Address: 3545 North First St., MS 138, Bldg. 1 Fax: (408) 434-0962
San Jose, CA 95134-1804 Web Site: www.fmi.fujitsu.comContact: Barry J. Marsh
Title: ASIC Marketing DirectorProducts: CMOS Gate Arrays and
Cell LibrariesASIC Vendor Type: Manufacturer
Company Philosophy:Fujitsu Microelectronics Inc. (FMI), is a subsidiary of Japan's Fujitsu Limited. FMI focuses onserving the North American EDP and data communications markets by offering value added,submicron, digital, CMOS ASIC products.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
CG46 CMOS 0.65 2 53,000-198,000 208-400 0.3 4.5 No NoneCE46 CMOS 0.65 2 53,000-198,000 208-400 0.3 4.5 No NoneCG51 CMOS 0.5 3 34,000-754,000 120-496 0.21 1.2 No NoneCE51 CMOS 0.5 3 34,000-754,000 120-496 0.21 1.2 No NoneCE56 CMOS 0.5 2 55,000-380,000 160-400 0.21 1.2 No NoneCE61 CMOS 0.35 2/3/4 131,000-2,000,000 58-364 0.085 0.6 No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
CS35 CMOS 0.8 2 0.37 6.4 No NoneCS50 CMOS 0.5 3 0.21 4.5 No NoneCS60 CMOS 0.35 3/4 na na No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Verilog, VHDL, EDIF HP, Sun Cadence, Mentor, Synopsys,Verilog-AL, Sunrise, Motive
Swindon, Wiltshire Web Site: www.gpsemi.comUnited Kingdom, Contact: Barry DenningtonSN2 2QW Products: Embedded Arrays, Gate Arrays,
Standard CellsASIC Vendor Type: Manufacturer
US Subsidiary: GEC Plessey Semiconductors Inc. Telephone: (408) 438-2900Address: 1500 Green Hills Rd. Fax: (408) 438-5576
Scotts Valley, CA 95067-0017 Contact: Maha OsmanU.S.A. Title: Business Development Director
Company Philosophy:GPS will deliver world class design support which will in turn deliver the customer the mostcomplex designs, including gate array, embedded array, cell based and mixed signal, and FPGAconversions. Quality design kits on third party design systems will ensure a smooth designdevelopment and transfer to production.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
CLA80000 CMOS 0.7 2/3 Metal 3000-513,000 56-448 0.2 (5V) 4.0 Yes NoneCLA90000 CMOS 0.6 2/3 Metal Up to 1,100,000 Up to 520 0.15 (5V) 1.3 Yes YesCLA200 CMOS 0.35 3/4 Metal Up to 2M 550 0.135 (3V) 0.9 Yes Yes
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
MVA80000 CMOS 0.7 2/3 Metal ROM, RAM, JTAG, ARM RISCProcessor, Z80, DSP, UARTS, 8051
0.2 (5V) 4.00 Yes None
MVA9000 CMOS 0.6 2/3 Metal Ò 0.15 (5V) 1.3 Yes YesGSC200 CMOS 0.35 3/4 Metal ARM Thumb DSP 40 MIPS System
ASIC Library, Computer,Communication and Networking
Macros
0.120 (3V) 0.32 Yes Yes
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-49
GEC Plessey Semiconductors (continued)
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Netlist, VHDL, Specification HP, Sun VITAL 16+ <10 days 25+ <4
ASIC Vendor Directory
7-50 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: Genesis Microchip Incorporated Telephone: (905) 470-2742Address: 200 Town Centre Blvd. Fax: (905) 470-2447
Suite 400 Web Site: www.genesisus.comMarkham, Ontario Contact: Scott BakerCanada L3R 8G5 Title: Manager, Product Development
Products: CMOS Gate Array, Standard Cells,and Image Resizing Cores
ASIC Vendor Type: Supplier
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay NA2
FO=2(ns)
Power(µW)
MilitaryTemperature
Range
Second Source
CMOS8 CMOS 0.65 3 Metal 230,000 0.4 2.7 µW/MHz No NoneCMOS6 CMOS 1.0 3 Metal 175,000 0.5 8.0 µW/MHz No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
gm833 CMOS 0.8 3 Metal Real Time Video/Image ResizingProcessor
0.35 4.0 Yes Yes
ECPD07 CMOS 0.8 2 Metal RAM, ROM, Dual-Port RAM, FIFO,Multiplier, PLA, Analog Cells, IEEE
1149.1
0.4 4.0 Yes Yes
ECPD10 CMOS 1.0 2 Metal " 0.5 5.0 Yes YesECPD12 CMOS 1.2 2 Metal " 1.1 7.0 Yes YesCB-C7 CMOS 0.8 3 Metal RAM, ROM, Analog Cells 0.4 6.5 No No
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Name: Gennum Corporation Telephone: (416) 632-2996Address: P.O. Box 489, Station A Fax: (416) 632-2055
Burlington, Ontario Web Site: www.gennum.comCanada L7R 3Y3 Contact: Paula Reiland
Title: Market Research AnalystProducts: Bipolar and Digital Linear Arrays
ASIC Vendor Type: Manufacturer
ANALOG ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
GA900 Bipolar 4.0 1 Metal 140-280 28-48 2.0 na Yes NoneLA200 Bipolar JI 8.0 1 Metal 37-122 14-24 20 na Yes NoneLA250 Bipolar JI 8.0 1 Metal 96-207 24-40 20 na Yes None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Functional, Layout IBM PC, Sunstation Cadence 1.5 1 60-100 12-18
Melbourne, FL 32902 Contact: Marketing Hot lineProducts: Analog and Mixed-Signal ASIC and ASSPs,
Rad-Hard Digital ArraysASIC Vendor Type: Manufacturers
Company Philosophy:Provide analog and mixed-signal ASICs and ASSPs for high-performance applications usingleading edge wafer fab processes and design tools. Also, provide rad-hard digital ASICs formilitary and space applications.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropogationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
HGA6075 Rad HardCMOS SOI
0.8 2 Metal 75,000 196 3 ApplicationDependent
Yes None
HGA6125 Rad HardCMOS SOI
0.8 2 Metal 125,000 240 3 ApplicationDependent
Yes None
HGA6197 Rad HardCMOS SOI
0.8 2 Metal 197,000 300 3 ApplicationDependent
Yes None
10K AUA Rad HardDMOS SOS
1.2 2 Metal 10,034 164 6 ApplicationDependent
Yes None
20K AUA Rad HardCMOS SOS
1.2 2 Metal 20,080 216 6 ApplicationDependent
Yes None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
HBC1000 BiCMOS withComplementary
Bipolar andsampled data
1.0 2 Metal 20,000 Digital Gates, 100 Op AmpEquivalents
0.5 na Yes None
HBC2500 BiMOS 3.0 2 Metal,2 Poly
1,500 Digital Gates, 50 Op AmpEquivalents
1.5 na Yes None
ANALOG CUSTOMProduct Technology Maximum
VoltageWiringLayers
Complex Cells NPN/PNP F(t)(GHz)
OtherDevices
MilitaryTemperature
Range
SecondSource
Bipolar DI UHF 10 2 10 Complex analog functions 8.0/4.0 NiCr/CAPS/P-JFETs
Yes None
Bipolar DI VHF 20 2 24 Complex analog functions 1.2/1.0 NiCr/CAPS/P-JFETs
Yes None
Bipolar DI EBHF 40 2 28 Complex analog functions 0.8/0.4 NiCr/CAPS/P-JFETs
Yes None
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-53
Name: Hewlett-Packard Telephone: (503) 750-4274Address: 1000 NE Circle Blvd. Fax: (503) 750-3588
Corvallis, OR 97330-4299 Web Site: www.hp.comContact: Susan Soukup
Title: Commercial ASICsProducts: CMOS Foundry and Cell-Based Design;
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
EDIF, GDSII, CIF, MEBES HP Workstations HP/Proprietary, Mentor,Cadence, Synopsis, Verilog
na na 50-100 5-11
ASIC Vendor Directory
7-54 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: Hitachi America, Ltd. Telephone: (415) 244-7267Address: 2000 Sierra Point Parkway Fax: (415) 583-4207
Brisbane, CA 94005 Web Site: www.hitachi.comContact: Jim Smith
Title: ASIC Product Marketing ManagerProducts: CMOS Cell Based ICs and Gate Arrays
ASIC Vendor Type: Manufacturer
Company Philosophy:Maintain position in CMOS technology through new generation of 0.35µm products, whichprovide leadership in ultra high speed and high density application. Especially simplifyrealization of the so-called system-on-a-chip through the adoption of the modular building blockconcept with the advanced on-chip CPU core (µCBIC: Micro Cell Based IC). Also provideadditional features including analog functions and a mixed analog/digital design capability. Asfor design tools, focus on supporting industry standard design automation tools to fit into userexisting design environment.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
HG62G Series CMOS 0.8 2 Metal 10,000-70,000 60-188 0.30 9µW/gate/MHz No NoneHG62S Series CMOS 0.8 3 Metal 26,000-250,000 60-256 0.30 9µW/gate/MHz No NoneHG71G Series CMOS 0.7 2 Metal 30,000-250,000 176-256 0.20 2.4µW/gate/MHz No NoneHG73GSeries CMOS 0.35 3 Metal Up to
1,500,000Up to600
0.11 0.7µW/gate/MHz No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
HG51B Series CMOS 0.8 2 Metal RAM, ROM, Datapath, synthesis 0.33 1.3µW/gate/MHz No VLSIHG51CS Series CMOS 0.7 2 Metal " 0.44 0.6µW/gate/MHz No VLSIHG51D Series CMOS 0.6 2 Metal " 0.24 0.2µW/gate/MHz No VLSIHG71C Series CMOS 0.8 2 Metal H8/300H core & peripherals 0.58 1.3µW/gate/MHz No NoneHG72C Series CMOS 0.5 2 Metal SH1 core & peripherals 0.32 3.2µW/gate/MHz No NoneHG73C Series CMOS 0.35 3 Metal RAM, ROM, Datapath, PLL 0.20 0.3µW/gate/MHz No TBD
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Company Philosophy:To assure the best technical and economical solution to any partner through the help of a verystrong engineering staff. Based on very sophisticated software tools, HMT guarantees thecorrect functionality and specification before prototype run.
San Jose, CA 95131 Web Site: www.ictpld.comContact: Robin Jigour
Title: Vice President Marketing and ApplicationsProducts: Programmable Logic Devices,
High Speed EPROMsASIC Vendor Type: Supplier
Company Philosophy:ICT designs, develops, and markets user-programmable integrated circuits and associateddevelopment tools. ICT Inc. targets flexible PLD architecture for lower pin-count applications.
PLACE Advance DevelopmentSoftware, ABEL, CUPL, PLDesigner,
OrCAD PLD 386+
AMI
PEEL20V8-5/-7/-10/-15/
-25
CMOS EEPROM 166.6-40MHz/5-25
24 pin Plastic DIP,28 pin PLCC
ABEL, CUPL, OrCAD PLD 386+PLDesigner XL
Lattice, AMD
PEEL22CV8-5/-7/-10/-15/
-25
CMOS EEPROM 166.6-40MHz/5-25
24 pin Plastic DIP,28 pin PLCC
PLACE Development Software None
PEEL20CG10A-5/-7/-10/-15/
-25
CMOS EEPROM 181-41.63MHz/20-25
24 pin Plastic and Ceramic DIP,28 pin PLCC
" AMI
PEEL22CV10A-5/-7/-10/-15/
-25
CMOS EEPROM 181-41.6MHz/5-25
24 pin Plastic DIP,24 pin SOIC, 28 pin PLCC
" AMI
PEEL22CV10AZ CMOS EEPROM 62.5-41.6MHz/15-25
24 pin Plastic DIP, SOIC, 28 pin PLCC " AMD
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-61
Name: IMP, Inc. Telephone: (408) 432-9100Address: 2830 N. First Street Fax: (408) 434-0335
San Jose, CA 95134 Web Site: www.impweb.comContact: David Laws
Title: Executive Vice PresidentProducts: CMOS Analog and Mixed-Signal
Custom, Analog PLDsASIC Vendor Type: Manufacturer
Company Philosophy:IMP, Inc. is a supplier of high-integration, analog and mixed-signal integrated circuits to thecommunications, computer and industrial markets. IMP is the inventor of the ElectricallyProgrammable Analog Circuit (EPACTM), the analog counterpart to the digital fieldprogrammable gate array (FPGA). It is also a technology leader in the field of programmablefilters and read-channel devices for mass-storage applications. These products aremanufactured on analog and mixed-signal optimized CMOS, BiCMOS, and EEPROM processes.
Address: Allmandring 30a Contact: Dr. Peter KilliusD-70569 Stuttgart Title: Division Manager, Design & TestGermany Products: CMOS Gate Arrays and ASSPs
ASIC Vendor Type: Manufacturer
Company Philosophy:IMS develops, manufactures, tests, and qualifies ASIC products in CMOS technology using anelectron beam direct write system for writing the customer specific layers. IMS even producessmall volumes and prototypes with attractive costs. The prototype development is withoutvolume commitment. For large volume production, masks are generated from the same layoutdata.
IMS has an ISO 9001-certified, comprehensive quality assurance system and is an ICmanufacturer certified according to CECC 00114/I and VI.
GFN Si gate CMOS 7 2 Semicustom Mixed Signal ICs, usingdigital logic and analog modules, ase.g., Schmitt Trigger, Comparators
(clocked, contin, high-speed), Op Amps(std., rail-to-rail input, high-gain)
Band gap reference, transmission gate,4x-, 8x- MUX, A-D Converters (sigma-delta, SAR), D-A Converters, sample &
hold, power-on-reset, oscillators
na R, largetransistors,
MOScapacitors,
groups of Nchannel, MOStransistors in
isolated p-well
Yes Yes
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-63
Name: Integrated Circuit Systems Inc. Telephone: (215) 630-5300Address: 2435 Boulevard of the Generals Fax: (215) 630-5399
P.O. Box 968 Web Site: www.icsinc.comValley Forge, PA 19482-0968 Contact: Bill Weir
Title: Director of MarketingProducts: CMOS Cell Libraries
ASIC Vendor Type: Supplier, Design House
Company Philosophy:Provide complete turn-key design and sourcing for customers, with a focus on mixed analogand digital designs. Develop industry standard products for use in niche market areas. Design,simulate, layout and verify each circuit. Provide standard cell libraries with customcells/functions where needed, an integrated CAD system, and CMOS processes. Develop testhardware and programs necessary for each device designed.
Medway City Estate E-mail: [email protected], Kent ME2 4DP Contact: Jim CareyEngland Title: Sales and Marketing Director
Products: CMOS, BiCMOS and BipolarMixed-Signal ASICs
ASIC Vendor Type: Third Party Design House, Supplier
Company Philosophy:IMS offers a complete but flexible ASIC and full custom IC design and supply service.
IMS has been established since 1981 and is the ASIC arm of the Semiconductor Division of CMLMicrosystems Plc. IMS ÔCustom ASIC SolutionsÕ provide a complete cell custom and full customASIC design and supply service. The service supports all stages of design from concept throughdesign, layout, prototype test, and debug, and assures that the end product is a fully functionaldevice that meets full specification.
Expertise Cross Section of Expertise RF (to 1.8GHz) Radio front ends, PMR, NMT900, GSM, PCN,
Frequency Synthesis
Optical Laser and LED drivers & Optical Receivers @ 50Mbs,155Mbsz, 622Mbs, 1.2Gbs, 2.4Gbs
Analogue ADC, DAC, Sigma-Delta converters VCO & VCXO, Filters(CT, SC, digital), PLLÕs, Op Amps, Comparators, etc.
Digital Specialist knowledge of Teletext systems plus generalexperience including MicroÕs, Interfaces UART/USART, Videoprocessing, Synchronizers, etc.
Memory SRAM, DRAM, CAM, FIFO, ROM, EPROM, EEPROM
Design Systems:The design systems in use at IMS are based on SUN SPARC hardware with Cadencesoftware.
Design Expertise:The design expertise within IMS includes Analogue, RF, Digital, Mixed Signal, and Memory.IMS has over 200 man years of experience in integrated circuit design.
LSI LGoic
ASIC Vendor Directory
7-66 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Integrated Micro Systems, Ltd. (continued)
Technologies:IMS has extensive design experience using CMOS, BiCMOS, and Bipolar technologies withone, two, and three metal layers on a variety of processes. Designs operating from DC to2.4Gbs have been successfully completed.
Silicon Foundries:In general, IMS targets processes from AMS/Thesys, Mitel, UMC, ST, and TSMC but is notrestricted to these.
Packaging:Any commercially available package can normally be supplied.
Production:Assembly and test is carried out either in the UK or off-shore depending on package typeand quantities required.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW/MHz/
Gate)
MilitaryTemperature
Range
SecondSource
ICA100 CMOS 1.2-0.5 2-3 Metal ADC, DAC, Sigma-Delta Converters
Digital filters, VRET, Op-amp, etc.
See Note 1.
See Note 2. See Note 2. Available Yes
ICA200 BiCMOS 1.2-0.8 2-3 Metal " " " Available YesICA300 Bipolar 2.0-0.8 1-2 Metal " " " Available Yes
1The custom library contains many more functions including digital cells and macros.
2These parameters are tailored by design, where necessary, to meet specified requirements.
MTG-B5, 1-3 Nakase Web Site: www.klsi.comMihama-ku, Chiba 261-01 Contact: Sales & Marketing Dept.Japan Products: CMOS Gate Array and Standard Cells
ASIC Vendor Type: Supplier
US Subsidiary: Kawasaki LSI U.S.A., Inc. Telephone: (408) 654-01804655 Old Ironsides Dr., Suite 265 Fax: (408) 654-0198Santa Clara, CA 95054
Company Philosophy:To define new ASICs, including systems and software, and provide them to customers to satisfycustomer needs for value-added products.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
KG2H CMOS 0.8 2 Up to 172K Up to280
0.4 na No None
KE2H CMOS 0.8 2 Up to 172K Up to280
0.6 na No None
KL9H CMOS 1.0 2 Up to 72K Up to280
0.6 na No None
KE9H CMOS 1.0 2 Up to 72K Up to536
0.9 na No None
KZ3H CMOS 0.5 3 Up to 779K Up to536
0.22 0.15 No None
KZ2H CMOS 0.8 2 Up to 277K Up to508
0.23 0.31 No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW/MHz/
Gate)
MilitaryTemperature
Range
SecondSource
KS2H CMOS 0.8 2 na 0.3 3.4 no NoneKS9H CMOS 1.0 2 na 0.7 5.5 no None
ASIC Vendor Directory
7-68 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: Lattice Semiconductor Corp. Telephone: (503) 681-0118Address: 5555 NE Moore Court Fax: (503) 681-3037
Hillsboro, OR 97124-6421 Web Site: www.latticesemi.comContact: Stan Kopec
Title: Director of MarketingProducts: Programmable Logic Devices
ASIC Vendor Type: Supplier
Company Philosophy:To supply the highest performance, low and high density CMOS programmable devices.
Greenwood House, London Road Contact: Iain JacksonBracknell, Berkshire RG12 2UB Title: Director MarketingUnited Kingdom
Company Philosophy:LSI Logic continues to focus on CMOS cell-based and gate array ASICs. Additionally, thecompany is augmenting this focus through an expanding line of complex cores for systemintegration MPU devices, DSP, MPEG, Ethernet, I/O controllers, using the companyÕs ASICcapabilities to help its customers get their products to market faster than other semiconductorsuppliers can.
Name: Lockheed Martin Federal Systems Telephone: (703) 367-4754Address: 9500 Godwin Drive Fax: (703) 367-3642
Manassas, VA 22110 Web Site: www.lmco.comContact: John Bendekovic
Title: Marketing RepresentativeProducts: CMOS Gate Array and
Standard Cell ProductsASIC Vendor Type: Manufacturer
Company Philosophy:Lockheed Martin Federal Systems, Manassas, Virginia, specializes in QML qualified, radiation-hardened and low power products and technologies. The company is committed to offeringflexible entry into our design systems which allow customers to leverage our technology intotheir products. Whether it is through schematic entry or Gate Level VHDL input, the companycan provide 5V, 3.3V, or lower powered products with gate counts to 300K in standard cell. OurQML qualified line can provide parts in a variety of flip chip or wire bond packages, or providedie for assembly in your MCM.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropogationDelay (ns)(3.3V/5V)
Power*
(µW)Military
TemperatureRange
Second Source
PS MI 5.5 CMOS 1.0 2 Metal 15,000 220 0.75/1.0 Yes naPS MI 6.2 CMOS 1.0 2 Metal 22,000 132 0.75/1.0 Yes naPS MI 7.2 CMOS 1.0 2 Metal 30,000 220 0.75/1.0 Yes naPS MI 8.0 CMOS 1.0 2 Metal 35,000 220 0.75/1.0 Yes naPS MI 9.4 CMOS 1.0 2 Metal 50,000 220 0.75/1.0 Yes na
PS MI 12.7 CMOS 1.0 2 Metal 90,000 220 0.75/1.0 Yes naPS SOG 5.5 CMOS 1.0 4 Metal 25,000 220 0.75/1.0 Yes naPS SOG 7.2 CMOS 1.0 4 Metal 50,000 220 0.75/1.0 Yes naPS SOG 9.4 CMOS 1.0 4 Metal 85,000 220/340 0.75/1.0 Yes naPS SOG 10.6 CMOS 1.0 4 Metal 100,000 220/340 0.75/1.0 Yes naPS SOG 12.7 CMOS 1.0 4 Metal 160,000 304/340 0.75/1.0 Yes naFS SOG 5.6 CMOS 0.7 4 Metal 40,000 220 0.5/0.75 Yes naFS SOG 8.0 CMOS 0.7 4 Metal 100,000 220 0.5/0.75 Yes na
FS SOG 10.6 CMOS 0.7 4 Metal 180,000 304/340 0.5/0.75 Yes naFS SOG 12.7 CMOS 0.7 4 Metal 250,000 304/340 0.5/0.75 Yes na
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropogationDelay (ns)(3.3V/5V)
Power(µW)
MilitaryTemperature
Range
SecondSource
PS MI CMOS 1.0 2 Metal Encoders, Decoders, Selectors, ParityCheckers, Comparators, Incrementer,Adders, Multipliers, Reg Files, RAMs,
ROMs, Clock Drivers, Self Test Macros,I/O Circuits
0.75/1.0 Yes na
PS SOG CMOS 1.0 4 Metal " 0.75/1.0 Yes naFS SOG CMOS 0.7 4 Metal " 0.5/0.75 Yes na
* Power estimates are provided as part of design release process and can be optimized to minimize power in your criticalapplications. Technologies offering <1 mW/MHz are available in QML qualified processes.
ASIC Vendor Directory
7-74 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Lockheed Martin Federal Systems (continued)
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaroung($K) (Weeks)
IBM, Sun Synopsys, Cadence, Viewlogic,Mentor, IBM EDA, Exemplar,
QuadDesign
Call for Quote Call for Quote Call for Quote Call for Quote
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-75
Name: Lucent Technologies Web Site: www.att.com/lucentAddress: 555 Union Blvd. Contacts: CMOS Standard Cells and Gate Arrays:
Allentown, PA 18103 Dave Kanyock: (610) 712-7653FPGAs:
Chris Demonico: (610) 712-7841Bipolar:
John Rebar: (610) 939-7255Products: CMOS Cell Libraries, Digital Bipolar Gate
Arrays, Linear Arrays, and FPGAsASIC Vendor Type: Manufacturer
Company Philosophy:Provide a full spectrum of ASIC products (FPGAs, gate arrays, standard cells, full custom) thatallows customers a single vendor solution.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
ATT656 CMOS 1.0 2 Metal 5000-177,000 100-464 0.27 na Yes NECDBIC TTL, ECL 1.5 1 Metal 1000-9000 48-164 0.15 2.0 Yes None
North Woodchester E-mail: [email protected], Gloucestershire GL5 5NN Contact: Mick EvansEngland Title: Technical Director
Products: IC Design ServicesASIC Vendor Type: Third Party Design House
Company Philosophy:Matrics provides fully independent, comprehensive, design services for full custom and semi-custom ASIC development. The company's customers are from the international arena(principally Europe and U.S.A.). Areas of technical excellence include CMOS and bipolar analogdesign, high voltage CMOS, LCD driver design, RF tag design, and standard cell librarydevelopment.
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Any Sun Network running: ISS,Cadence (Frameworks 1 and 2),
Products: CMOS and BiCMOS Gate Arrays,CMOS Cell Libraries, FPGAs
ASIC Vendor Type: Third Party Design House, Supplier
Company Philosophy:Since 1985 the Memotec ASIC Design Center has been engaged in development, support, anddistribution of digital gate arrays and standard cells. The company supports the entire designflow including FPGA conversion for fast prototyping and "system on silicon" solutions.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
BiCMOS BiCMOS 1.2 2 Metal 2000-22,000 80-272 0.35 0.035/MHz No NoneCMOS CMOS 1.0 2/3 Metal 1000-150,000 64-464 0.4 0.008/MHz No NoneCMOS CMOS 0.5 3 10,000-630,000 92-908 0.3 0.0009/MHz No None
Company Philosophy:Professional Services Division helps customers get maximum productivity from their electronicproduct design organizations. Focuses on providing expertise in process engineering andplanning, design environment implementation, contract design services, education, and training.IC and ASIC Design Centers and IC Technology Centers worldwide.
Professional Services is one of the most rapidly expanding segments of the EDA market andMentor Graphics has been at the forefront with its Professional Services Division. PSD teamswith its customersÕ design groups to help customers rapidly adopt and deploy breakthroughtechnologies for Integrated Systems Design (ISD). The results are dramatic gains indevelopment cycle time and product quality. The Professional Services Division has a largeteam of EDA design and process experts to address immediate project design issues and to laterimplement long-term design process change. PSD Library Solutions has the most advanced andcomprehensive library services and tools in the EDA industry to support the productivity ofenhanced design processes. PSD services, in combination with Mentor GraphicsÕ ISDtechnologies can bring together all of the resources required to achieve improvements in cycletime through the adoption of linchpin technologies, flows, and intellectual property.
Name: Micro Networks Corporation Telephone: (508) 852-5400Microelectronics Business Unit Fax: (508) 853-8296
Address: 324 Clark Street Contact: John CondonWorcester, MA 01606 Title: Sales Manager, Custom
Microelectronics Business UnitProducts: ASICs and Modules
ASIC Vendor Type: Design, Test and Packaging
Company Philosophy:Micro Networks Corporation (MNC) designs and manufactures custom and semi-custom dataacquisition products, clock oscillators, application specific ICs (ASICs) and custom hybridmicrocircuits for worldwide high reliability aerospace/defense, industrial, and commercialapplications.
MNCÕs Custom Microelectronics Business Unit specializes in ASIC translations, retargetingdigital and mixed signal CMOS standard cell and gate array ASICs from one foundry or processto another with technology upgrades and retrofits as requested. MNC has the engineeringexperience and expertise to handle the design and development of your most complex ASICsand offers a complete top down design methodology to support your new ASIC designs. MicroNetworks designs and manufacturers custom microelectronics products including thick and thinfilm substrates, hybrids, and multichip modules. Typical applications for its custommicroelectronics products are avionics, imaging, portable satellite terminal, military electronicsequipment, and submarine communications receivers.
Through its acquisition of GTE Microelectronics in 1996, Micro Networks expanded its custommicroelectronics product line to include capabilities in ASIC design, manufacture, and test.
Company Philosophy:Mitel offers complete water foundry services and a wide range of processes including 1.5µm-5.0µm CMOS, and 0.9µm metal-gate CMOS. Voltage ranges from 3V to 26V. The Mitel waterfoundry offers custom design services for custom ICs or can process wafers from customer-owned tooling. Standard-cell libraries are available. Custom ASICs are delivered in wafer form,probed dies, or fully assembled and tested devices.
In 1996, Mitel acquired Swedish semiconductor manufacturer ABB Hafo AB, who specializes inmixed-signal cell-based ASIC design and the manufacture of custom radiation-hardened ICsand optoelectronics.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
SIG2 CMOS N-Well 2.0 2 Poly,2 Metal
Analog Cell Library (A/D, D/A, AGCs,OTAs, Amps, Bandgaps, Filters...),
RAM, ROM, PLA, EEPROM, DMOS,Bipolar, High Value Resistors
2.0 na Yes None
SIG3 CMOS TwinWell
1.5 2 Poly,2 Metal
Analog Cell Library (A/D, D/A, AGCs,OTAs, Amps, Bandgaps, Filters...),
RAM, ROM, PLA, EEPROM, DMOS,Bipolar, High Value Resistors
1.5 na Yes None
SOS4 SOS 2.0 1 Poly,2 Metal
RAM, ROM, PLA, Analog Functions 1.2 na Yes None
SOS5 SOS 1.25 1 Poly,1 Metal
RAM, ROM, PLA 1.0 na Yes None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Netlist for digital, Spec foranalog
Apollo, Sun, DEC VAX Cadence, Mentor, Viewlogic,OrCAD
>40 8-12
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-87
Name: Mitsubishi Electronics America Inc. Telephone: (408) 730-5900Address: 1050 E. Arques Ave. Fax: (408) 245-8214
Sunnyvale, CA 94086 Web Site: www.mitsubishi.comContact: Allin Kingsbury
Arrays and Cell Based ICsASIC Vendor Type: Manufacturer
Company Philosophy:Mitsubishi is a high volume manufacturer of CMOS ASIC products, including gate arrays,embedded cell arrays, and cell based ICs, with the worldÕs most highly automated productionfacilities. Mitsubishi has achieved industry leadership in performance in 0.5µm and 0.35µmSeries ASICs and has also achieved low power dissipation, high reliability, and exceptionalquality. The Mitsubishi package development group has achieved technological leadership witha number of ÒfirstsÓ including the first high power QFP with a metal heat spreader, the first highpin count TAB QFP with 576 pins, and a series of very low inductance BGA packages for highpin count, high performance ASICs.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates(Usable)
I/Os PropagationDelay (ns)
Power(µW/MHz/Gate)
MilitaryTemperature
Range
Second Source
0.35µm Series CMOS, gateisolation
0.35 2 to 4 up to 768 0.101 0.9 (3.3V) No None
EP Series " 0.5 2 or 3 700K up to 512 0.143 1.3 (3.3V) No NoneGP3 Series " 0.5 2 or 3 500K up to 512 0.190 0.8 (3.3V) No NoneGP5 Series " 0.65 2 or 3 400K up to 512 0.190 2.2 (5V) No None
M6008X Series " 0.8 2 or 3 25K to 250K 136-512 0.210 2.4 (5V) No NoneM6008X Series " 0.8 2 6K to 20K 72-160 0.210 2.4 (5V) No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW/MHz/
Gate)
MilitaryTemperature
Range
SecondSource
0.35µm Series CMOS 0.35 3,4 Metal RAM, ROM, Multiply, FIFO, etc. 0.101 0.9 (3.3V) No NoneEP Series CMOS 0.5 2, 3 Metal " 0.143 1.3 (3.3V) No None
GP3 Series CMOS 0.5 2, 3 Metal " 0.190 0.8 (3.3V) No NoneGP5 Series CMOS 0.65 2, 3 Metal " 0.190 2.2 (5V) No None0.8 GP5 µm
SeriesCMOS 0.8 " 0.210 2.4 (5V) No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
81829 Munich Contact: Wolfgang StammelGermany Title: Product Marketing
Company Philosophy:Extend CMOS, bipolar, and BiCMOS technologies into submicron, mixed technology, mixeddesign methodology products supported by high quality fab and advanced packaging withhighly integrated design automation tools.
GATE ARRAYProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
H4C Series CMOS 0.7 3 Metal 27,048-317,968 144-556 0.365 0.003 Yes InternalH4CPlus
SeriesCMOS 0.6 3 Metal 13,056-295,596 108-512 0.28 0.001 Yes Internal
HDC Series CMOS 1.0 3 Metal 3036-104,832 68-512 0.475 0.006 Yes InternalMCA III ECL Bipolar OI
(ECL)1.5 3 Metal 2208-10,332 108-256 0.15 1.0-3.0 No None
MCA III ETL Bipolar I/O(ECL/TTL)
1.5 3 Metal 848-6915 42-168 0.15 1.0 No None
MOSAIC V Bipolar/BiCMOS
0.8 4 Metal 110,000 400 0.09 0.25-1.0 No Foundry
PLDsProduct Technology Based Registered/Non
RegisteredProp. Delay (ns)
Package Type Package Type Second Source
MPA1000 0.8µm CMOS SRAM na na na None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround
($K) (Weeks)HDL, Netlist HP, Sun Mentor, HP, Sun, Verilog XL,
QuickSim II, Synopsys, GateEnsemble, Dracula, Cadence,
AutoLogic
20-200 2-8 na na
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-89
Name: NEC Electronics Inc. Telephone: (408) 588-6000Address: 2880 Scott Boulevard Fax: (408) 588-6130
P.O. Box 58062 Web Site: www.nec.comSanta Clara, CA 95052-8062 Contact: Brent Dichter
Title: Strategic Marketing ManagerProducts: CMOS, BiCMOS, and Bipolar Gate Arrays;
CMOS Cell-Based ASICs, FPGAs;Bipolar Analog Arrays
ASIC Vendor Type: Manufacturer
Company Philosophy:Provide state-of-the-art technology, service, and manufacturing to ASIC customers. RegionalizeASIC fab services (Roseville, CA and Ireland) to reduce turnaround time and increaseproduction support. Supply leading edge products in volume. Maintain lead in manufacturingquality.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
BiCMOS-5 BiCMOS 1.2-1.3 2 Metal 2200-24,000 80-272 0.45 0.038/MHz No NoneBiCMOS-8 BiCMOS 0.5 3/4 Metal 238,000 0.18 0.0033 No NoneCMOS-6 CMOS 1.0 3 Metal 42,240-177,400 236-464 0.27 0.008/MHz No Lucent
CMOS-6A CMOS 1.0 2 Metal 5400-30,7000 84-192 0.27 0.008/MHz No LucentCMOS-6V CMOS 1.0 2 Metal 5500-30,700 140-220 0.27 0.008/MHz No LucentCMOS-6X CMOS 1.0 2 Metal 1200-5600 64-104 0.27 0.008/MHz No LucentCMOS-7 CMOS 0.8 3 Metal 60,500-250,900 220-448 0.22 0.0066/MHz No LucentCMOS-8 CMOS 0.65 2/3 Metal 11,700-233,300 172-676 0.17 0.0027/MHz No None
CMOS-8L CMOS 0.5 2/3 Metal 10,900-627,300 164-908 0.13 0.0012/MHz No NoneCMOS-8LCX CMOS 0.5 3 Metal 39,900-486,000 284-908 0.13 0.0012/MHz No None
ECL-4A Bipolar (ECL) 1.2 3 Metal 2400-10,000 102-236 0.15 0.485 No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
CB-C7 CMOS 0.8 2/3 Metal RAM, ROM, 82xx, V20, V30, Analog 0.34 0.0065/MHz No NoneCB-C8 CMOS 0.5 2/3 Metal RAM, ROM, 8086-compatible V30MX
N-7075 Tiller, Contact: Olav LindquistNorway Title: Marketing Director
Products: Design and ASIC, ASSP PurchasingASIC Vendor Type: Supplier, Third Party Design House
Company Philosophy:Nordic VLSI is a foundry-independent design house specializing in designing full custom,automated custom, and gate array ASICs. Its specialty is design of analog, mixed-signal, andcomplex digital systems on a single chip for low-power consumption applications and custommicroprocessor systems. The Nordic VLSI Components division offers component (ASIC andASSP purchasing services.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
CMOS 0.5-1.6 2 Metal Analog and Digital Filters, ADC, DAC,Op Amps, µRISC µP Core, DSP Cores,
RAM, ROM, EEPROM, ALUs,Multipliers, Counters, Full Custom
Design
Yes Yes
BiCMOS 1.0-2.0 " Yes YesGaAs 0.6-1.0 " Yes Yes
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
System Spec. DEC, SPARC, PC, Cadence,Anacad, SPICE
15-50 4 5-50 8
ASIC Vendor Directory
7-92 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: Oki Semiconductor Inc. Telephone: (408) 737-6505Address: 785 North Mary Ave. Fax: (408) 720-1918
Sunnyvale, CA 94086-2909 Web Site: www.okisemi.comContact: Vince Liu
Company Philosophy:Emphasize CMOS gate arrays (in sea-of-gates architecture) in deep submicron technology downto 0.35µm for pad-limited applications at popular pin counts supported by QFP and BGApackages. Offer standard cells in (customer structured array architecture also known asembedded arrays) for core-limited applications or circuits with large or multiple memoryfunctions. Engage broadly with leading third-party CAD vendors to facilitate a smooth andcompatible design interface with customers. Offer state-of-the-art CAD tools such asATVG/scan path, JTAG boundary scan, floorplanner, clock skew management, etc. to reduceengineering development time and improve customersÕ time to market. Offer advance complexcells such as high-speed PLL (up to 300MHz), Ethernet MAC, Gigabit MAC, USB controller, PCI,UART, 1394 and ARM7TDMI core.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
MSM13Q000 CMOS SOG* 0.35 3 Metal Up to 470,000 Up to 352 0.09 5V-tolerant 3V I/O No NoneMSM14Q000 CMOS SOG* 0.35 4 Metal Up to 644,000 Up to 352 0.09 5V-tolerant 3V I/O No None
MSM12R0000 CMOS SOG* 0.5 2 Metal Up to 41,000 Up to 240 0.11 Mixed 3V/5V, 3V No NoneMSM13R0000 CMOS SOG* 0.5 3 Metal Up to 464,000 Up to 624 0.11 Mixed 3V/5V, 3V No NoneMSM32R0000 CMOS SOG* 0.5 3 Metal Up to 429,108 Up to 448 0.11 5V-tolerant 3V I/O No NoneMSM30R0000 CMOS SOG* 0.5 2 Metal Up to 306,072 Up to 320 0.11 5V-tolerant 3V I/O No NoneMSM10S0000 CMOS SOG* 0.8 2 Metal Up to 225,280 Up to 420 0.30 5V, 3V No NoneMSM38S0000 CMOS SOG* 0.8 3 Metal Up to 224,256 Up to 420 0.25 Mixed 5V/3V, 5V,
Company Philosophy:ENCORE! program was developed to provide customers with an alternative to usingFPGA/CPLD products in a production environment. The program converts FPGA/CPLDs orother gate arrays into an Orbit gate array, thus allowing for a cost effective primary or second-source provider of a pin for pin replacement product.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
Base 16-240 CMOS 0.8 4 300-70,000 304 0.3 Yes
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Milpitas, CA 95035 Contact: Mo IbrahimTitle: Product Manager
Products: CMOS Gate Arrays and Cell LibraryASIC Vendor Type: Manufacturer
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
MN53000 CMOS 1.5 2 Metal 315-20,064 42-256 1.0 0.015 No NoneMN56000 CMOS 1.2 2 Metal 2000-30,000 64-281 0.6 0.012 No None
MN56A000Sea of Gates
CMOS 1.2 2 Metal 2000-70,000 64-281 0.6 0.012 No None
MN59000 CMOS 1.2 1 Metal 2000-15,000 64-281 0.7 0.012 No naMN5A/C000 CMOS 0.5 2/3 Metal 5000-360,000 108-536 0.3 0.006 No None
MN5BA/C000 CMOS 0.5 2/3 Metal 10,000-700,000 100-528 0.18 0.0016 No NoneMN5C CMOS 0.35 2/3 Metal 10,000-1,500,000 100-536 0.11 0.0016 No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
MN73000 CMOS 1.5 2 Metal ROM, RAM, PLA, A/D and D/AConverter, Op Amp, Analog Switch
1.0 0.015 No None
MN76000 CMOS 1.2 2 Metal " 0.7 0.012 No NoneMN7A000 CMOS 0.8 2 Metal " 0.4 0.006 No NoneMN7C000 CMOS 0.35 2/3 Metal " 0.18 0.0016 No NoneMN7D000 CMOS 0.6 2 Metal " 0.25 0.005 No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Converted, Netlist Sun Mentor, Viewlogic, Verilog,Synopsys, Avant
30 3-4 50 6-8
ASIC Vendor Directory
7-96 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: Philips Semiconductors Web Site: www.semiconductors.philips.comAddress: 9201 Pan American Freeway NE Contact: Dave Sroka
PLC18V8Z CMOS EPROM 33/25 " Industry Standard nonePLC42VA12 CMOS EPROM 40/35 CerDIP, DIP, PLCC Industry Standard none
PLHS501 Bipolar (TTL) Fuse na/8 PLCC Industry Standard nonePLS100 Bipolar (TTL) Fuse na/50 DIP, PLCC Industry Standard nonePLS105 Bipolar (TTL) Fuse 50/na DIP, PLCC Industry Standard none
PL(U)S153 Bipolar (TTL) Fuse na/10 DIP, PLCC Industry Standard nonePLS155 Bipolar (TTL) Fuse 70/50 DIP, PLCC Industry Standard nonePLS157 Bipolar (TTL) Fuse 70/50 DIP, PLCC Industry Standard none
PLS159A Bipolar (TTL) Fuse 55/35 DIP, PLCC Industry Standard nonePLS168 Bipolar (TTL) Fuse 50/na DIP, PLCC Industry Standard none
PL(U)S173 Bipolar (TTL) Fuse na/10 DIP, PLCC Industry Standard nonePLS179 Bipolar (TTL) Fuse 55/35 DIP, PLCC Industry Standard none
PLUS405 Bipolar (TTL) Fuse 18/na DIP, PLCC Industry Standard nonePZ3032 CMOS EPROM 9/8 PLCC, TQFP Industry Standard nonePZ5032 CMOS EPROM 7/6 PLCC, TQFP Industry Standard none
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Functional, Netlist Apollo, VAX, IBM PC Mentor, OrCAD, Daisy, Valid,Synopsys, Verilog, Cadence
Towcester, NN12 6AD E-mail: [email protected] Kingdom Contact: Ray Oakley
Title: Managing DirectorASIC Vendor Type: Third Party Design House
Company Philosophy:Phoenix VLSI Consultants Ltd. are a UK based integrated circuit design house offeringindependent services in VLSI and high performance integrated circuit technology, design, andCAD. In design, the company offers a range of services from feasibility studies and vendorselection through to chip design and product supply. Designs are undertaken on a turnkey orinteractive basis.
Specialist Design Skills:
Circuits: Low power and low voltage, high performance analog, high speed digital, highdensity logic, mixed mode circuits, gate arrays, and cell libraries.
Functions: Filters; specialist memories Ñ SRAM, DRAM, non-volatile, digital signalprocessing elements, and data converters.
Applications: Radio and personal communications, instrumentation, high speedcomputing, broadband communications and switching (SDH and SONET), andimage/video processing.
Technology Development:Whole processes, process upgrades, and yield enhancement.
Design Technologies:CMOS, Bipolar, BiCMOS, and GaAs.
Design Styles:FPGA, PLD, gate arrays, analog arrays, standard cells, and mixed mode.
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Written Specifications,Behavioral, HDL, Netlists, and
D-55129 Mainz Contact: Stephan KlesyGermany Title: Application Engineer
Products: Bipolar Analog and Mixed-Signal ASICsASIC Vendor Type: Manufacturer
Company Philosophy:Design and manufacturing of standard cell, full-custom, and array-based ASICs for analog andmixed-mode applications. All production stages performed at the PREMA facility.
ANALOG ARRAYSProduct Technology Maximum
VoltageWiringLayers
Complex Cells NPN/PNP F(t)(GHz)
OtherDevices
MilitaryTemperature
Range
SecondSource
Array AB Bipolar 35 1 Op-Amps, Comparators, BandgapReferences
4.0/0.03 JunctionCapacitors,
PinchResistors
Yes Many
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Task Briefing, Netlist or PatternGenerator Tape
Silvar-Lisco, Cadence Various 6.5 9
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-99
Name: QuickLogic Corporation Telephone: (408) 987-2000Address: 2933 Bunker Hill Lane Fax: (408) 987-2012
Santa Clara, CA 95054 Web Site: www.quicklogic.comContact: Ed Smith
Title: Director, MarketingProducts: CMOS PLDs
ASIC Vendor Type: Supplier
Company Philosophy:QuickLogicÕs programmable ASIC (pASIC) devices are implemented in a submicron CMOSprocess and deliver high speeds and low power consumption. All of the companyÕs existingdevices operate at 3.3 volts. They are based on QuickLogicÕs proprietary amorphous siliconbased ViaLink (metal-to-metal antifuse) programming mechanism that offers high speeds andhigh densities (up to 8,000 usable gates). QuickLogic also supplies a comprehensive set of CAEdevelopment tools, operating on the PC and popular workstation platforms. An openarchitecture approach allows popular third-party tools to interface to the companyÕsdevelopment environment.
QuickLogic has implementation of 0.65µm CMOS technology using Cypress SemiconductorÕsmanufacturing facilities. The development of a next-generation pASIC family providing up to20,000 usable gates and offering significant speed advantages over current products is in theworks.
Company Philosophy:Full service supplier with PLDs, gate arrays, standard cells, and full custom devices. Full designcapability and highest quality.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
5GU Ricoh GA CMOS 0.8 2 Metal 20,000-200,000 136-384 0.38-0.63 na No None5GV Ricoh GA CMOS 1.2 2 Metal 4000-16,000 106-204 0.8 na No None5GF Ricoh GA CMOS 1.5 2 Metal 2100-8200 84-168 1.0 na No None5GH Ricoh GA CMOS 2.0 2 Metal 560-5500 40-120 1.5 na No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
RSC-08 RhcohCell
CMOS 0.8 na CPU Core, Peripherals, DSP Cell, RAM,ROM, ADC, DAC
Ukyo-ku, Kyoto 615 Web Site: www.rohm.co.jpJapan Contact: Hiroo Mochida
Title: General ManagerProducts: CMOS Gate Arrays and Cell Based ICs
ASIC Vendor Type: Manufacturer
Company Philosophy:RohmÕs CMOS gate array series uses a sea-of-gate configuration and process technologies of0.8µm CMOS and 0.6µm CMOS, design and production are supported with those high levelbasic technologies. A variety of products are available, with guaranteed supply voltage range of2.0V to 5.5V. The design flexibility of RohmÕs high multiple I/Os allows users to implementdesigns with a cost-effective, high technology, user friendly design solution.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
BU16500 CMOS 0.6 1 Poly,2/3 Metal
11,753-174,698 64-240 3V: 0.55V: 0.3
-- No None
BU16300 CMOS 0.6 1 Poly,2/3 Metal
11,753-174,698 64-240 3V: 0.55V: 0.3
-- No None
BU12300 CMOS 0.8 1 Poly,2 Metal
4550-22,152 98-206 3V: 0.75V: 0.4
-- No None
BU12400 CMOS 0.8 1 Poly,2 Metal
2484-3720 42-66 5V:0.4 -- No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
BU 165S-HP CMOS 0.6 1 Poly,2/3 Metal
CPU, Multiplier, ALU, RAM, 2 portRAM, ROM
5V: 0.3 2.28 No None
BU163S-HP CMOS 0.6 1 Poly,2/3 Metal
" 3V: 0.5 1.01 No None
BU165S-HD CMOS 0.6 1 Poly,2 Metal
" 5V: 1.0 0.63 No None
BU163S-HD CMOS 0.6 1 Poly,2 Metal
" 3V: 1.5 0.28 No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Analog ArraysASIC Vendor Type: Supplier, Design House
Company Philosophy:Rood Technology UK Limited is a fabless semiconductor company offering a one stop shopapproach to ASIC development. In addition to the design of ASICs, the company offers a widerange of test, assembly, qualification, programming, and tape and reel services. Although nottied to a single foundry, Rood Technology has preferred suppliers and processes.
Bipolar 20 2 Digital Cell Library 7.0 ConfigurableRs, Cs
Yes SGS Thomson
Zetex Bipolar 20 2 Audio Amps 0.3 Schottky,NPNs
Yes None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
From system description tonetlist
Yes Sun Sparc 10s, Calma GDSII,Cadence, Analog Artist, Verilog,
DIVA, etc. SPICE
10-300 3-16 25-300 6-16
ASIC Vendor Directory
7-104 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: S-MOS Systems Inc. Telephone: (408) 922-0200Address: 2460 N. First St. Fax: (408) 922-0238
San Jose, CA 95131 Web Site: www.smos.comContact: Dan Beck
Title: Marketing Services ManagerProducts: CMOS Gate Arrays and Cell Library
ASIC Vendor Type: Supplier
Company Philosophy:S-MOS Systems, Inc. develops, designs, and markets custom and semicustom ICs and a varietyof standard products and ASSPs, leveraging its core competencies of low power and advancedpackaging for applications in small computing systems. Together with the company's ASIClibraries, its ASIC offerings are well suited for the small form factor marketplace.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
SLA9000 CMOS 1.0 3 4000-32,000 86-222 0.65 12 No NoneSLA9000L CMOS 1.0 3 4000-32,000 86-222 1.3 5 No NoneSLA20000 CMOS 0.65 3 Up to 200,000 100-592 0.41 (3V) 1.6 No None
SLA20000 Plus CMOS 0.65 3 Up to 46,000 100-592 na 1.6 No NoneSLA30000 CMOS 0.6 3 Up to 250,000 120-424 na na No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
SSC5000 CMOS 0.8 3 Metal RAM, ROM, Multiplier, PCI cells na na No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Converted, Netlist, Layout MicroVAX, IBM, IBM PC,Apollo, Sun, Intergraph
Daisy, Mentor, FutureNet,OrCAD, Viewlogic, Valid
18 3 36 6
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-105
Name: Samsung Semiconductor Inc. Telephone: (408) 954-6925Address: 3725 North First Street Web Site: www.samsung.com
San Jose, CA 95134-1708 Contact: Josh BellinTitle: ASIC Group Manager
Products: ASIC, including Embedded ArraysASIC Vendor Type: Manufacturer
STD60 CMOS 0.8 2 Above plus DSP, PCI, SCSI 0.35 na No NoneSTD70 CMOS 0.6 2/3 Above plus ARM7, 5V/3V 0.2 na No NoneSTD80 CMOS 0.5 2/3 Above plus MPEG 1/2 0.15 na No NoneML80 CMOS 0.5 2/3 Embedded 1/2/4 Mbit DRAM 0.15 na No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Mountain View, CA 94043 Web Site: www.sanyo.co.jpContact: Mr. Sugai
Title: Senior Marketing ManagerProducts: CMOS Gate Arrays and Embedded Array
ASIC Vendor Type: Manufacturer
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
LC92000 CMOS 1.5 2 Metal 700-20,350 62-239 1.2 na No NoneLC93000 CMOS 1.2 2 Metal 2300-30,000 62-252 0.9 na No None
LC21000A CMOS 0.8 2 Metal 2000-242,000 48-460 0.4 na No NoneLC21000AT CMOS 0.8 3 Metal 4000-421,000 48-460 0.4 na No NoneLC22000A CMOS 0.6 2 Metal 2000-300,000 48-460 0.3 na No None
LC22000AT CMOS 0.6 3 Metal 4000-525,000 48-460 0.3 na No NoneLC21000B CMOS 0.8 2 Metal 1,000-36,000 48-208 0.4 na No None
LC21000BT CMOS 0.8 3 Metal 2,000-60,000 48-208 0.4 na No None
EMBEDDED ARRAYSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
LC26000A CMOS 0.8 2/3 Metal CPU, RAM, ROM, MPY, A/D, D/A 0.4 na No NoneLC27000A CMOS 0.6 2/3 Metal " 0.3 na No None
Company Philosophy:Provide complete ASIC design solutions on engineering workstations targeting CMOStechnology for: functionally complex ASICs, and mixed analog/digital ASICs. Provide pathsfrom HDL to silicon.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
EPOCH CMOS 0.4, 0.6,0.6, 0.8
2 Metal/1 Poly
2 Metal/2 Poly
3 Metal/1 Poly
3 Metal/2 Poly
RAM, ROM, PLA, FIFO, Multiplier, Allcells are parameterized, Datapath
Modules, PADS
na na Yes SeveralVendors
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
EPOCH, VHDL, Verilog Sun Mentor, Cadence na na Contact Factory
Name: SGS-Thomson Microelectronics Telephone: +39 39 603 5752Address: Via C. Olivetti 2 Fax: +39 39 603 5360
I-20041 Agrate Brianza Contact: Mr. C. LagomichosMilan, Italy Title: Product Marketing Manager
Company Philosophy:To provide timely, technically advanced, high quality semicustom solutions to the computer,communications, industrial, and consumer markets.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
ISB24000 CMOS 0.7 3 Metal 3000-216,000 48-400 0.25 3µW/1000gates/MHz
Yes None
ISB28000 CMOS 0.7 3 Metal 3000-300,000 48-400 0.25 3µW/1000gates/MHz
Yes None
ISB35000 HCMOS 0.5 3 Metal Up to 499K 172-544 0.21 0.7µW/1000gates/MHz
Yes None
ISB350K HCMOS 0.5 3 Metal Up to 1.1M 172-648 na na Yes None
Company Philosophy:Offer cost-effective system integration solutions by providing embedded-CPU gate array andcell-based IC families. These include the Z80, V20, V30, CISC processors and their peripherals,and 32-bit RISC processors such as the ARM core. Also offer optimal solutions for high, low andvery-low gate count applications.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
LH72HL CMOS 0.8 2 15,000-50,000 178-283 0.4 na No NoneLH73HL CMOS 0.8 2 15,000-50,000 178-283 0.4 na No None
LZ9G CMOS 1.6 2 750-31,900 44-204 1.2 na No NoneLZ95 CMOS 1.2 2 300-10,000 46-194 1.2 na No NoneLZ96 CMOS 1.2 2 300-8000 46-176 1.2 na No NoneLZ97 BiCMOS 1.2 2 600-3000 57-124 1.2 na No NoneLZ98 CMOS 1.0 2 8000-30,000 96-184 0.6 na No NoneLZ9F CMOS 0.8 2 3,000-125,000 48-245 0.4 na No NoneLZ9A CMOS 0.8 2 30,000-200,000 212-450 0.4 na No NoneLZ9C CMOS 1.0 2 3500-32,000 96-178 0.6 na No NoneLZ9J CMOS 0.5 2/3 10,000-
1,000,00064-444 0.13 na No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
D-81617 Munich 80 Web Site: www.siemens.de/SemiconductorGermany Contact: Kurt Friedl
Title: Marketing ManagerProducts: High Speed Logic
ASIC Vendor Type: Manufacturer
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
SH100E Bipolar 3.0 3 Metal 1000-6500 120 0.13 na No NoneSH100G Bipolar 0.8 3 Metal 1000-3000 120 0.06 na No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Functional, Generic, Converted,Netlist
Apollo, Sun Intergraph, Mentor, Synopsys 30-100 6-8
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-111
Name: Silicon & Software Systems Ltd. Telephone: 353-1-207 8800Address: South Country Business Park Fax: 353-1-453 7020
Leopardstown Contact: Charles Quinn (Europe)Dublin 18, Title: Sales and MarketingIreland Products: CMOS Gate Array and Standard Cell;
CMOS and BiCMOS mixed digitaland analog
ASIC Vendor Type: Third Party Design House, Supplier
U.S. Subsidiary: Silicon & Software Systems Telephone: (408) 453-7020Address: 2099 Gateway Place Fax: (408) 453-6444
Suite 100 Contact: Dermot BarrySan Jose, CA 95110 Title: Sales and Marketing
Company Philosophy:Silicon & Software Systems (S3) is a specialist electronics engineering design house providingstate-of-the-art expertise to industry for design of ICs, embedded software and hardwaresystems. The company provides its design services in emergin technologies in digitalcommunications, consumer, computing, and automotive electronics, covering mobile andcordless telephony, network systems, digital TV, audio and vidio, set-top boxes, andmultimedia, speech and graphics processing. As a result of itÕs unique ability to assistcoustomer throughout the design flow from architecture, including hardware-software co-development and system partitioning, right through to layout, test and evaluation, Silicon &Software Systems is fast becoming the first-choice design center for electronics companiesworldwide.
Founded in 1986, the company has an impressive track-record in managing large projects acrossEurope, USA, and Asia. The company employs 200 engineers and has offices in Dublin andCork, Ireland and in San Jose, California, USA. Silicon & Software Systems is certified toISO9001/TickIT standards.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
Fujitsu CG51 CMOS 0.5 3 Metal 34,000-820,000 512 0.26 na Yes NoneLSI LCA300K CMOS 0.6 2/3 Metal 10,000-500,000 104-664 0.22 na Yes None
Motorola H4CSeries
CMOS 0.7 3 Metal 27,048-317,968 144-456 0.18 na Yes None
Motorola H4CPlus Series
CMOS 0.6 3 Metal 13,000-285,000 80-447 0.28 na Yes None
ToshibaTC183G/E
CMOS 0.5 3 Metal 42,000-450,000 128-400 0.25 na Yes None
ASIC Vendor Directory
7-112 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Silicon & Software Systems Ltd. (continued)
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
LSI LCB300K CMOS 0.6 2/3 Metal RAM, ROM na na Yes NoneMotorolaMDA08
CMOS 0.8 3 Metal " 0.37 na Yes None
ToshibaTC183C
CMOS 0.5 2/3 Metal RAM 0.23 na Yes None
TI TGC2000/TEC2000
CMOS 0.65 na RAM 0.35 na Yes None
TI TGC4000/TEC4000
CMOS 0.35 na RAM, ROM, PLL 0.15 na Yes None
TI TSC5000 CMOS 0.25 na RAM, ROM, D/A, A/D, PLL 0.22 na Yes NoneCMOS 0.5-1.2 2/3 Metal Analog and Digital na na Yes Yes
BiCMOS 1.0-2.5 2 Metal " na na Yes YesPhilips C150 CMOS 0.8 2 Metal RAM, ROM, PLA, Multiplier, ALU na na Yes
Philips C150DS CMOS 0.67 2 Metal " na na YesPhilips C075 CMOS 0.35 5 Metal na na na na naPhilips C050 CMOS 0.25 6 Metal na na na na naPhilips C100 CMOS 0.5 3 Metal " na na Yes na
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Billerica, MA 01821 Web Site: www.sipex.comProducts: Bipolar and CBiCMOS Analog Arrays
ASIC Vendor Type: Supplier
Company Philosophy:Supply linear, mixed-mode, and quick-turn devices. Specialize in rad-hard and hightemperature and high speed designs. Sipex stands for signal processing excellence. Therefore, allcircuits that require processing any analog signal into a digital is its "raison d'etre" or is itsbusiness. It also provides monolithic ASICs, multichip, and hybrid devices.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
SP2100 Bipolar DI 2 2 D/A, Sample and Hold, Band GapReference, Zener Reference, VCO,Analog Multiplier, Charge Pump,Comparator, Buffers, Amplifiers,
Transimpedence
na na Yes None
ANALOG ARRAYSProduct Technology Maximum
VoltageWiringLayers
Complex Cells NPN/PNP F(t)(GHz)
OtherDevices
MilitaryTemperature
Range
SecondSource
SP2101 Bipolar DI 20/35 2 Op Amp, Comparator, Multiplier,Transimpedence Amplifier, VoltageReference, Sample and Hold, VCO,
Charge Pump
0.8/0.5 na Yes None
SP2104 Bipolar DI 20/35 2 " 0.8/0.5 " Yes NoneSP2107 Bipolar DI 20/35 2 " 0.8/0.5 " Yes NoneSPXYZ
(Full Custom)CBiCMOS 150 2 CMOS Logic plus Array Cells. 1 volt to
100 volt on same chip.0.8/0.5 CMOS plus array
devicesYes None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Verilog/Synopsys, FunctionalSpecification, CIF
HP, Sun HP, Viewlogic
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-115
Name: Sony Semiconductor Company Telephone: (408) 955-6515of America Fax: (408) 955-5116
Address: 3300 Zanker Road, M/S SJ3B1 Web Site: www.sel.sony.com/semiSan Jose, CA 95134-1901 Contact: J.P. Laussade
Title: V.P. of SSA (AVC Products)Products: CMOS Gate Arrays*
ASIC Vendor Type: Manufacturer
*Sony manufactures CMOS gate array ASICs, but are currently only available in Japan.
ASIC Vendor Directory
7-116 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Name: Swindon Silicon Systems Ltd. Telephone: +44 1793 614039Address: Radnor Street Fax: +44 1793 616215
Swindon SN1 3PR E-mail: [email protected] Contact: Charlie McDermentUnited Kingdom Title: Marketing Director
Products: Gate Arrays, Standard Cells, CustomASIC Vendor Type: Third Party Design House, Supplier
Company Philosophy:Design, test, and supply of ASICs, specializing in: bipolar, CMOS and BiCMOS mixed-mode,precision analog bipolar, and very high speed bipolar.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
Bipolar 0.8 1 to 3 1000-100,000CMOS 0.8 1 to 3 1000-100,000
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
CMOS <1 2 or 3 ADC, DAC, Switch Cap Filters,Bandgap, Op Amps, Sample and Hold,
etc., plus many small and large scaledigital cells
BiCMOS <1 2 or 3 "
ANALOG ARRAYSProduct Technology Maximum
VoltageWiringLayers
Complex Cells NPN/PNP F(t)(GHz)
OtherDevices
MilitaryTemperature
Range
SecondSource
Bipolar 15 to 40 1 to 3 Yes 1-6/0.05-0.25
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE*,Prototype Turnaround($K) (Weeks)
Fort Collins, CO 80525 E-mail: [email protected] Site: www.symbios.com
Contact: Saligent Systems (lead response) Products: CMOS Cell-Based Libraries
ASIC Vendor Type: Manufacturer
Company Philosophy:Symbios Logic creates storage management and peripheral connection solutions and provides afull spectrum of products for these solutions, including cell-based ASICs, integrated circuits(ICs), host adapters and storage systems as well as supporting software drivers and utilities.The company focuses on developing technology partnerships with its customers and vendors,including original equipment manufacturers and resellers in the networked computing,peripherals, and communications markets.
The ASIC offering features a broad range of digital and analog functions for cell-basedimplementations in data processing, high performance I/O, and communication applications.ASIC design kits enable sign-off simulation on popular engineering workstations with leadingCAE design tools. Designs are supported by advanced CMOS deep submicron processes andhigh density packaging focused on quick-turn prototype capability and fast ramps to volumeproduction.
Company Philosophy:Toshiba's semicustom philosophy is to provide the highest quality semicustom products andtechnical support. Through Toshiba's support of high level design methodologies and designand production of leading technology products, Toshiba is able to provide highly effective ASICsolutions to meet the most demanding customer requirements.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
TC14L CMOS 1.0 2/3 1000-20,000 84-208 0.4 na No NoneTC160G/E CMOS 0.8 2/3 4000-210,000 650 0.3 na No NoneTC163G/E CMOS 0.8 2/3 2000-196,000 600 0.4 na No NoneTC180C/E CMOS 0.5 2/3 10,000-560,000 650 0.21 na No NoneTC183G/E CMOS 0.5 2/3 17,000-315,000 628 0.23 0.011 (3V)/
0.025 (5V)No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
TC180C CMOS 0.5 2/3 Metal RAM, ROM, FIFO; arighmetic megacellsincluding multiplier and add-subtractor
cells
0.23 na No None
TC183C(3.3V and 5V)
CMOS 0.5 2/3 Metal " 0.23 na No None
TC265C CMOS 0.8 2 Metal 0.3 na No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
P.O. Box 4935 Web Site: www.triquint.comBeaverton, OR 97005 Contact: Chris O'Conner
Title: Product Development andApplication Manager
Products: GaAs E/D-MESFET Standard Cell LibraryASIC Vendor Type: Manufacturer
Company Philosophy:TriQuint is one of the largest merchant manufacturers of gallium arsenide (GaAs) ICs. TriQuintmaintains its focus on ASIC services and continues to support three separate activities Ð digital,linear, and microwave.
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
SecondSource
QLSI/QLSI2 GaAsE/D-MEDFET,
E/D
0.9 2 Metal Custom Digital/Analog 0.09 2-8 Yes None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Company Philosophy:Supplier of high-performance digital ASICs to military, aerospace, and other "harshenvironment" application markets. Products are available in MIL-STD-883 Class B, Class S,QML Q, and QML V quality levels, and radiation hardened.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
UTER CMOS 0.9 2/3 Metal 5,000-125,000 342 0.41 4.0 Yes NoneUTER CMOS 0.8 3 Metal 5,000-200,000 342 0.30 4.0 Yes NoneUTO.6 CMOS 0.6 3 Metal 5,000-400,000 500 0.20 na Yes None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
San Jose, CA 95112 Contact: Greg AnzelcTitle: V.P. Marketing and Sales
Products: CMOS Analog ArraysASIC Vendor Type: Manufacturer
Company Philosophy:Emphasizing digital gate arrays in military applications, quick-turn commercial analog arrays,mixed-mode arrays, and high voltage power ICs.
ANALOG ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
UniversalA/D GA
CMOS (18V) 4.0 1 Metal 100-1000 30-80 1.5 na Yes Silicon Systems
Universal GA CMOS (15V) 2.0 2 Metal 100-2400 18-90 0.9 na Yes None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
D and E/D MESFET Gate ArraysASIC Vendor Type: Manufacturer
Company Philosophy:Vitesse is dedicated to providing solutions to the high-performance segment of the IC market.Vitesse products are implemented with a unique GaAs process technology. Vitesse's H-GaAstechnology offers an unprecedented combination of high integration, high performance, and lowpower. Vitesse semi-custom products continue to displace ECL and BiCMOS technologies inhigh-performance computer, telecommunications, data communications, and instrumentationapplications.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
Fury Series/VSC3K
GaAs E/DMESFET(DCFL)
0.8 3 Metal 3584 92 0.23 1.1 Yes Fujitsu
Fury Series/VSC5K
GaAs E/DMESFET(DCFL)
0.8 3 Metal 6400 120 0.23 1.1 Yes Fujitsu
Fury Series/VSC10K
GaAs E/DMESFET(DCFL)
0.8 3 Metal 13,376 196 0.23 1.1 Yes Fujitsu
Fury Series/VSC15K
GaAs E/DMESFET(DCFL)
0.8 3 Metal 16,896 196 0.23 1.1 Yes Fujitsu
Fury Series/VSC30K
GaAs E/DMESFET(DCFL)
0.8 3 Metal 30,528 256 0.23 1.1 Yes Fujitsu
FX Series/VGFX20K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 19,400 92 0.1 0.2 Yes None
FX Series/VGFX40K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 42,500 138 0.1 0.2 Yes None
FX Series/VGFX100K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 102,000 196 0.1 0.2 Yes None
FX Series/VGFX200K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 195,000 256 0.1 0.2 Yes None
FX Series/VGFX350K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 353,000 378 0.1 0.2 Yes None
ASIC Vendor Directory
7-126 INTEGRATED CIRCUIT ENGINEERING CORPORATION
Vitesse Semiconductor (continued)
GATE ARRAYS (continued)Product Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
GLX Series/15K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 15,000 87 .13 0.1 No None
GLX Series/40K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 40,000 103 .13 0.1 No None
GLX Series/80K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 80,000 135 .13 0.1 No None
GLX Series/120K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 120,000 151 .13 0.1 No None
GLX Series/220K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 220,000 187 .13 0.1 No None
Viper Series/VGLC2K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 1500 34 .15 .2 na None
Viper Series/VGLC10K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 7000 70 .15 .2 na None
Viper Series/VGLC15K
GaAs E/DMESFET(DCFL)
0.6 4 Metal 13,000 138 .15 .2 na None
SCFX Series GaAs MESFET 0.6 4 Metal 136 SCFL 67 Fmax=2.5GHz 8.5 No NoneSCFX 10K (DCFL/SCFL) 2600 DCFL 0.10 0.2
SCFX Series GaAs MESFET 0.6 4 Metal 396 SCFL 115 Fmax=2.5GHz 8.5 No NoneSCFX 40K (DCFL/SCFL) 15,748 DCFL 0.10 0.2
SLXSeries/15K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 15,000 52 0.10 0.1 No None
SLXSeries/40K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 40,000 76 0.10 0.1 No None
SLXSeries/80K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 80,000 104 0.10 0.1 No None
SLXSeries/120K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 120,000 120 0.10 0.1 No None
SLXSeries/220K
GaAs E/DMESFET(DCFL)
0.4 4 Metal 220,000 156 0.10 0.1 No None
MISCELLANEOUSPreferred Customer
InterfaceCAD System
AccessWorkstations, Simulators,
and LayoutGate Array NRE,
Prototype Turnaround($K) (Weeks)
Standard Cell NRE,Prototype Turnaround($K) (Weeks)
Netlist Apollo, Sun Apollo, Sun, Mentor, Merlyn-G,Synopsys, Verilog, Cadence,
Lasar
varies 8 na na
ASIC Vendor Directory
INTEGRATED CIRCUIT ENGINEERING CORPORATION 7-127
Name: VLSI Technology, Inc. Telephone: (408) 434-7905Address: 1109 McKay Dr. Fax: (408) 434-7866
San Jose, CA 95131 Web Site: www.vlsi.comContact: Florence Lee
Title: Manager, ASIC Product PlanningProducts: CMOS Standard Cells, Gate Arrays,
Flex Arrays, and ASSPsASIC Vendor Type: Manufacturer
Company Philosophy:Develop high-performance and cost-effective submicron ASIC solutions and manufacturingcapability. Expand systems expertise in offering (FSBª) Functional System Blocks forcomputing, telecom, networking, consumer, industrial, and military markets, to improvecustomers' time-to-market. Increase design productivity with compilers and CAD tools supportfrom synthesis to test. Provide design expertise through a network of Technology Centers andsales offices in the U.S., Europe, and the Far East. Improve responsiveness to reduce prototype,pre-production, and production cycle times.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
VGC450/453 CMOS 0.8 2/3 3700-232,000 434 0.26 0.0045 Yes naVGC650 CMOS 0.6 2/3 Metal 15,000-614,000 672 0.21 0.0031 Yes na
VGC650L CMOS 0.6 2/3 Metal 15,000-614,000 672 0.28 0.0013 Yes naVGC750 CMOS 0.5 2/3 Metal 15,000-614,000 672 0.25 0.0011 Yes na
San Jose, CA 95124 Web Site: www.xilinx.comContact: Chuck Fox
Title: Vice President of MarketingProducts: CMOS Programmable Logic Devices
ASIC Vendor Type: Supplier
Company Philosophy:Offer multiple programmable logic architectures, increase speed, drive down costs, and offertools so that PLDs will continue to replace mask gate arrays and lower-density PLDs.
FPGAsProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW)
MilitaryTemperature
Range
Second Source
XC2000/XC3000A
CMOS 0.8, 0.6 na 600-8000 58-144 na 0.1 Yes None
XC3100A CMOS 0.8, 0.6 na 1200-7500 na na 0.1 Yes NoneXC4000 CMOS 0.6, 0.5 na 3000-250,000 80-544 na 0.1 Yes None
XC7200A CMOS 0.8 na 1000-3000 38-66 15 0.5-1.0W Yes NoneXC7300 CMOS 0.8 na 1000-6000 66-198 5,7,10 0.5-1.5W Yes NoneXC5000 CMOS 0.6 na 2000-23,000 84-244 na 0.1 Yes NoneXC8100 CMOS 0.6 na 600-20,000 32-208 na 0.5 Yes NoneXC9500 CMOS 0.6 na 500-64,000 34-180 5,7,10 0.5 No NoneXC6200 CMOS 0.6 na 9000-100,000 180-512 na .2 No None
Address: Grenzstrasse 28 Web Site: www.zmd-gmbh.dePostfach 34 Contact: Gunter ZiegenbalgD-01109 Dresden Title: Manager, Department Customer ProductsGermany Products: CMOS/BiCMOS Gate Arrays, Standard
Cells and Foundry ServiceASIC Vendor Type: Manufacturer
Company Philosophy:Zentrum Mikroelektronik Dresden (ZMD) is an independent medium-sized IC manufacturerwith 30 years experience in all fields of semiconductor design and manufacturing.
ZMD offers its capacities in design, wafer production, packaging, and testing as a completeservice for both semiconductor manufacturers and final customers in industry.
GATE ARRAYSProduct Technology Line
Width(µ)
ProgrammableLayers
Gates I/Os PropagationDelay (ns)
Power(µW/1000
Gates/MHz)
MilitaryTemperature
Range
Second Source
U5600 CMOS 0.8 2 Metal 2000-80,000 48-310 0.2 4.5 No None
STANDARD CELLSProduct Technology Line
Width(µ)
WiringLayers
Complex Cells PropagationDelay (ns)
Power(µW/1000
Gates/MHz)
MilitaryTemperature
Range
SecondSource
U2000 CMOS 1.2 2 Metal RAM, ROM Multipliers, Datapath, BISTController, Scan Path Controller