Ashcroft Quick Guide all_products_sg_qg2_Rev1_08-18
Ashcroft Quick Guide
all_products_sg_qg2_Rev1_08-18
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
1
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
TABLE OF CONTENTS Product Type Page
Trademarks Trademarks, Service Marks, Logos 2PRESSURE GAUGES Process Gauges 1279, 1377, 1379, 2462, Duragauge® Pressure Gauges 4 1259, 1290, 1109, 1209 Process Pressure Gauges 5 T5500, T6500, T5500E Pressure Gauges 6 1187, 1188, 1189 Bellows Pressure Gauges 7 Industrial Gauges 1008S/SL 40, 50, 63 and 100mm Pressure Gauges 8 1009, 2008 Pressure Gauges 9 1017, 1220, 1010 Pressure Gauges 10 1038, 1339A, 1490, 1495 Pressure Gauges 11 Commercial Gauges 8008A, 1008A/AL 63, 100mm Pressure Gauges 12 1005, 1005P, 1005S, 1005P-XUL Pressure Gauges 12 1000, 2071A, 12DDG, 15DDG, 23DDG Pressure Gauges 13 1001T, 1001T-XOR, 1007P-XOR Pressure Gauges 14 Digital Gauges DG25, 2084, 2086, 2089 Digital Gauges 15 2074, 2174, 2274 Digital Gauges 16 Differential Gauges 1130, 1131, 1132, 1133, 1134 Differential Pressure Gauges 17 1125 & 1125A, 1127 & 1128 Differential Pressure Gauges 18 F5509, F6509 Differential Pressure Gauges 18 Sanitary Gauges 1032, 1036, 1037 Fitting, 2030 Series Sanitary Gauges 19 Test Gauges A4A, 1082, 1084 Test Gauges 20PRESSURE SWITCHES Pressure Switches A, B, L, G Series Pressure & Differential Pressure Switches 22 P, F, N, DDS Series Pressure & Differential Pressure Switches 23PRESSURE TRANSDUCERS Transducers/Transmitters G2, G3, T2 Pressure Transducers 26 KM41/KM45, KM15 Pressure Transducers 26 A2, A4, A2X, SL-17 Pressure Transmitters 27 GC31, GC35, GC51 Pressure Transducers 28 Differential Transducers GC55, GC30, GC52, GC42 Pressure Transducers 29 CXLdp, DXLdp, IXLdp, RLdp, XLdp Pressure Transmitters 30 K1, K2, KX, KS, K8 Pressure Transducers 31DIAPHRAGM SEALS Threaded Seals 100, 200, 300, 400, 500, 510 Threaded Seals 34 310, 311, 312, 330, 740, 320 Threaded Seals 35 Flanged Seals 102, 103, 106, 402, 702, DF Flanged Seals 36 In-Line Seals 104, 105, 107, 108 In-Line Seals 37 Isolation Rings 80, 81, 82 Isolation Rings 38TEMPERATURE INDICATORS Thermometers EI, CI, EL Bimetal Thermometer 42 Duratemp® Remote Mounted Thermometers 42 Thermowells Thermowells 43 Temperature Switches T4/T7 Series NEMA 4X, 7/9 Temperature Switches 44 G, L, P Series NEMA 4 Temperature Switches 44 RTDs AR10, AR20 RTDs 45 AT10, AT20, AT30 Thermocouples 45TEST INSTRUMENTS Calibrators ATE-2, ST-2A Digital Indicator 48 Testers 1305D, 1327CM & 1327D Deadweight Testers 49 PT-1 Pressure Tester 49ACCESSORIES 2, 3, 5 Valve Manifold, Gauge Valve 52 Low Pressure Ball Valve, High Pressure Ball Valve 52 Multiport Valve, Pressure Limiting Valve 52 1198, 2198 Siphons, 1106 Pulsation Dampener 53 1112 Pressure Snubber 53 1115A & 1115P Capillary Lines 53 7001L & 7004L Steel Needle Valves 53 2265 Electric Warning Contacts 53 1093, 1094 & 1096 Gauge Cocks 53
2018_qg2_all_products_sg_RevA.indd 1 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
2
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Trademarks
Ashcroft Inc. TrademarksAshcroft maintains a variety of globally Registered Trademarks and Service Marks, many of which appear in this Ordering Handbook. The following Trademarks and Service Marks are the property of Ashcroft Inc. and should not be used without its permission on any product or service: Ashcroft®Duradrive™ pressure gaugeDuragauge® pressure gaugeDuragauge® PLUS!™ pressure gaugeDuralife® pressure gaugeDuralife® PLUS!™ pressure gaugeDuraShield™ instrument assemblyDuratemp® thermometerDuratube™ system Easy Zero™ adjustmentEveryangle™ connection FlutterGuard™ option GloBand™ displayHeise® Maxivision® dialMicroSpan® adjustment MiniGauge® pressure gaugePLUS!™ Performance option PowerFlex™ movement Quick-Select™ calibratorSQR™ – Safe Quick ReleaseSi-Glas™ sensorSpoolCal® actuatorTrue Zero™ indicationWeksler® Willy®
Ashcroft Inc. Service MarksActionLine® Ashcroft ActionLine®Ashcroft Gold Service®CASE® - Critical Application Solution Experts® CESSMGold ServiceSMHeise ActionLine® Heise Gold ServiceSM
Other TrademarksThese non-Ashcroft trademarks are used throughout the book and are the property of their respective owners:
AMINCO®Bendix®Carpenter® 20Cherry Burrell®Dacron®Decrin®Duratherm 600®Grafoil®Halar®Halocarbon®Hastelloy®Hirschmann®Inconel®Kalrez®
Kynar®Monel®Neobee® M-20Neoprene® Nicrobraze®Noryl®Skydrol® 500-4 Syltherm®Teflon®Tri-Clamp®Ultrafil®VCO®VCR®Viton®
NACENACE International publishes standards governing materials selection in corrosive environments. NACE standard MR0175/ISO 15156 (Materials for use in H2S-containing environments in oil and gas production) and MR0103/ISO 17945 (Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments) are often cited when specifying instrument for sour oil and gas applications. These standards provide guidance on selecting materials that are resistant to stress cracking caused by exposure to hydrogen sulfide. Compliance with the standards may be required by law in certain jurisdictions.
Hydrogen SulfideA diaphragm seal should be used for high concentrations of hydrogen sulfide; for over 3% or 30,000 ppm, a seal is essential. Hastelloy C276 is recommended, and tantalum may be used, but is not compliant with MR0103. For oil and gas applications, MR0175 or MR0103 should be consulted.
Wastewater ApplicationsMay also encounter trace amounts of hydrogen sulfide. Instruments specified per the NACE standards are suitable for hydrogen sulfide bearing waste water applications although the scope of the standards is limited to oil and gas production and refining.
Units of Measurementpsi = pounds per sq. inch psig = pounds per sq. inch gauge psia = pounds per sq. inch absolute psid = pounds per sq. inch differential inH2O = inches of waterIWC = inches of water column IWD = Inches of water differential mmH2O = millimeters of water inHg = inches of mercuryIMV = inches of mercury vacuummPa = millipascal MPa = megapascal pa = pascalkPa = kilopascalmbar = millibarkg/cm2 = kilograms per centimeter squared
Logos
PLUS!™ = PLUS!™ Performance Option – Dampens Vibration, Shock and Pulsation effects
Gold ServiceSM = Expedited Delivery
RoHS = RoHS Compliant
CRN = Canadian Registration Number
TM
2018_qg2_all_products_sg_RevA.indd 2 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
3
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
PROCESS GAUGES1279, 1377, 1379, 2462.................................. 4
1259, 1290, 1109, 1209.................................. 5
T5500, T6500, T5500E ................................... 6
1187, 1188, 1189 ........................................... 7
INDUSTRIAL GAUGES1008S/SL, 1008S/SL Center Back ................ 8
1009, 2008 ..................................................... 9
1010, 1017, 1220 ......................................... 10
1038, 1339A, 1490, 1495 ..............................11
COMMERCIAL GAUGES8008A, 1008A/AL .........................................12
1005, 1005P, 1005S, 1005P-XUL ..................12
1000, 2071A, 12DDG, 15DDG, 23DDG...........13
1001T, 1001-XOR, 1007P-XOR. ....................14
DIGITAL GAUGESDG25, 2084, 2086, 2089 ............................... 15
2074, 2174, 2274 ......................................... 16
DIFFERENTIAL GAUGES1130, 1131, 1132, 1133, 1134 ...................... 17
1125 & 1125A, 1127 & 1128 .........................18
F5509, F6509 ............................................... 18
SANITARY GAUGES1032, 1036, 1037 ..........................................19
2030 Digital ................................................ 19
TEST GAUGESA4A, 1082, 1084 ........................................... 20
PRESSUREGAUGES
2018_qg2_all_products_sg_RevA.indd 3 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
4
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Process Pressure Gauges
1279 1377 1379 2462
Specifications
Dial Sizes 4½˝ 4½˝, 6˝, 8½˝ 4½˝, 6˝, 8½˝ 6˝
Accuracy±0.5% of span
(ASME B40.100 Grade 2A)±0.5% of span
(ASME B40.100 Grade 2A)±0.5% of span
(ASME B40.100 Grade 2A)±0.5% of span
(ASME B40.100 Grade 2A)
DampeningGlycerin, Silicone, Halocarbon®,
PLUS! ™ PerformanceGlycerin, Silicone, Halocarbon®,
PLUS! ™ PerformanceGlycerin, Silicone, Halocarbon®,
PLUS! ™ PerformanceGlycerin, Silicone, Halocarbon®,
PLUS! ™ Performance
ProcessConnection
¼ NPT, ½ NPT Male (see data sheet for more options)
¼ NPT, ½ NPT Male (see data sheet for more options)
¼ NPT, ½ NPT Male (see data sheet for more options)
¼ NPT, ½ NPT Male (see data sheet for more options)
Process Connection
LocationLower, back Lower, back Lower, back Lower, back
Mounting Options Stem, surface, flush Stem, flush Stem, surface, flush Stem, surface, flush
WettedComponents
Bourdon Tube Bronze, 316L SS, Monel® Bronze, 316L SS, Monel®Bronze, 316L SS, Monel®, Inconel®
Bronze, 316L SS, Monel®
Process Connection
Brass, 316L SS, Monel®, Steel
Brass, 316L SS, Monel®, Steel
Brass, 316L SS, Monel®, Steel
Brass, 316L SS, Monel®, Steel
Non-WettedComponents
Case Phenolic Aluminum Aluminum Polypropylene
Window Glass, acrylic, safety glass,
non-glare glassGlass, acrylic, safety glass,
non-glare glassGlass, acrylic, safety glass,
non-glare glassGlass, acrylic, safety glass,
non-glare glass
RingPolycarbonate
(meets UL 94 V-0)Steel, black enamel
Polycarbonate (meets UL 94 V-0)
Polypropylene
Pressure Relief Back
Polycarbonate (meets UL 94 V-0)
SSPolycarbonate
(meets UL 94 V-0)Polypropylene
ProcessTemperatureLimits
Dry -20°F to 250°F (-29°C to 121°C) -20°F to 250°F (-29°C to 121°C) -20°F to 250°F (-29°C to 121°C) -20°F to 250°F (-29°C to 121°C)
PLUS! ™ -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C)
Glycerin Fill 20°F to 150°F (-7°C to 66°C) 20°F to 150°F (-7°C to 66°C) 20°F to 150°F (-7°C to 66°C) 20°F to 150°F (-7°C to 66°C)
Silicone Fill -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C)
Halocarbon® Fill -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C)
RangesPressure
Vacuum, compound, 15 to 30,000 psi
Vacuum, compound, 15 to 30,000 psi
Vacuum, compound, 15 to 100,000 psi
Vacuum, compound, 15 to 30,000 psi
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa
WeatherProtection
Dry CaseCase not sealed, recommended for weather protected environment only
Case not sealed, recommended for weather protected environment only
Case not sealed, recommended for weather protected environment only
Case not sealed, recommended for weather protected environment only
Liquid Filled IP66 or NEMA 4X IP66 or NEMA 4X IP66 or NEMA 4X IP66 or NEMA 4X
Hermetically Sealed
IP66 IP66 IP66 IP66
Approvals CRN CRN CRN CRN
2018_qg2_all_products_sg_RevA.indd 4 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
5
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Process Pressure Gauges
1259 1290 1109 1209
Specifications
Dial Sizes 4½˝ 4½˝ 4½˝ 4½˝
Accuracy±0.5% of span
(ASME B40.100 Grade 2A)±0.5% of span
(ASME B40.100 Grade 2A)±0.5% of span
(ASME B40.100 Grade 2A)±0.5% of span
(ASME B40.100 Grade 2A)
Dampening Glycerin, Silicone, Halocarbon® NAGlycerin, Silicone, Halocarbon®,
PLUS! ™ PerformanceGlycerin, Silicone, Halocarbon®,
PLUS! ™ Performance
ProcessConnection
¼ NPT, ½ NPT Male ¼ NPT, ½ NPT Male¼ NPT, ½ NPT, 9⁄16-18 UNF-2B
High pressure fitting¼ NPT, ½ NPT Male
Process Connection
LocationLower Lower Lower Lower
Mounting Options Stem, surface, flush Stem, surface, flush Stem Stem, surface
WettedComponents
Bourdon Tube 316L SS, Monel® Inconel® 316L SS, Inconel® 718 316L SS
Process Connection
316L SS, Monel® 316L SS 316L SS 316L SS, Monel®
Non-WettedComponents
CasePBT Polybutylene Terephtalate
(meets UL 94 V-0)ABS SS 316L SS
Window Material Glass, safety glass, acrylic Acrylic, glass Glass, safety glass, acrylic Glass, safety glass, acrylic
RingPBT Polybutylene Terephtalate
(meets UL 94 V-0)302 SS 300 SS 316L SS
Pressure Relief Back
PBT Polybutylene Terephtalate(meets UL 94 V-0)
Polypropylene 304 SS 316L SS
ProcessTemperatureLimits
Dry-20°F to 250°F
(-29°C to 121°C)-20°F to 250°F
(-29°C to 121°C)-20°F to 250°F
(-29°C to 121°C)-20°F to 250°F
(-29°C to 121°C)
Glycerin Fill20°F to 200°F(7°C to 93°C)
NA NA20°F to 200°F(7°C to 93°C)
Silicone Fill-40°F to 200°F(-40°C to 93°C)
NA NA-40°F to 200°F(-40°C to 93°C)
RangesPressure
Vacuum, compound, 15 to 20,000 psi
15 to 2,000 psiVacuum, compound 15 to 100,000 psi
Vacuum, compound, 15 to 20,000 psi
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, mPa, kg/cm2, kPa psi, bar, mPa, kg/cm2, kPa
WeatherProtection
Dry CaseCase is not sealed,
recommended for weather protected environment only
Case is not sealed, recommended for weather protected environment only
Case is not sealed, recommended for weather protected environment only
IP65
Liquid Filled IP65 NA NA IP65
Hermetically Sealed
IP65 NA IP65 IP65
Approvals CRN CRN
2018_qg2_all_products_sg_RevA.indd 5 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
6
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
T5500 T6500 T5500E
Specifications
Dial Sizes 100mm, 160mm 100mm, 160mm 100mm
Accuracy±1% of span (EN 837-1) ±1% of span (EN 837-1) ±0.50% of span (EN 837-1)
0.5% of span (OPT.) 0.5% of span (OPT.) NA
DampeningGlycerin, Silicone, Halocarbon®,
PLUS! ™ PerformanceGlycerin, Silicone, Halocarbon®,
PLUS! ™ PerformancePLUS! ™ Performance
ProcessConnection
¼ NPT, ½ NPT MaleG ¼ B, G ½ B Male
¼ NPT, ½ NPT MaleG ¼ B, G ½ B Male
¼ NPT, ½ NPT MaleG ¼ B, G ½ B Male
Process Connection
LocationLower, back Lower Lower
Mounting Options
Stem, surface, flush Stem, surfaceFront flange
(available only with M1 connection)
WettedComponents
Bourdon Tube 316L SS, Monel® 316L SS, Monel®316L SS Tube
17-4 PH Sensor
ProcessConnection
316 SS, Monel® 316 SS, Monel® 316 SS
Non-WettedComponents
Case 304 SS, 316 SS 304 SS, 316 SS 304 SS
Window Material
Glass, safety glass, acrylic Safety glass, acrylic Safety glass, acrylic
Ring 304 SS 304 SS 304 SS
Pressure Relief Back
NA SS NA
ProcessTemperatureLimits
Dry -40°F to 392°F (-40°C to 200°C) -40°F to 392°F (-40°C to 200°C) -13°F to 185°F (-25°C to 85°C)
PLUS! ™ -40°F to 392°F (-40°C to 200°C) -40°F to 392°F (-40°C to 200°C) -13°F to 185°F (-25°C to 85°C)
Glycerin Fill 19°F to 200°F (-7°C to 93°C) 19°F to 200°F (-7°C to 93°C) NA
Silicone Fill -40°F to 200°F (-40°C to 93°C)-40°F to 200°F (-40°C to 93°C)
XQC option: -94°F to 174°F (-70°C to 70°C)
NA
Halocarbon® Fill -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) NA
ATEX -13°F to 140°F (-25°C to 60°C) -13°F to 140°F (-25°C to 60°C) NA
RangesPressure Vacuum, compound to 15,000 psi Vacuum, compound to 15,000 psi Vacuum, compound to 15,000 psi
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa
WeatherProtection
Dry Case IP66 NEMA 4X, Weatherproof IP66 NEMA 4X, Weatherproof IP65
Approvals CRN, ATEX (OPT.) CRN, ATEX (OPT.)
Process Pressure Gauges
2018_qg2_all_products_sg_RevA.indd 6 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
7
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Process Pressure Gauges
1187 1188 1189
Specifications
Dial Sizes 4½˝ 4½˝ 4½˝, 6½˝
Accuracy±2-1-2% of span
(ASME B40.100 Grade A)±2-1-2% of span
(ASME B40.100 Grade A)±2-1-2% of span
(ASME B40.100 Grade A)
DampeningThrottle screw, dampeners, capillary,
diaphragm seals and snubbersThrottle screw, dampeners, capillary,
diaphragm seals and snubbersThrottle screw, dampeners, capillary,
diaphragm seals and snubbers
ProcessConnection
¼ NPT, ½ NPT Male ¼ NPT, ½ NPT Male ¼ NPT, ½ NPT Male
Process Connection
LocationBack Lower, back Lower
Mounting Options
Flush Stem, surface, flush Stem, surface
WettedComponents
Bellows Brass, 316 SS, Monel® Brass, 316 SS, Monel® Brass, 316 SS, Monel®
ProcessConnection
Brass, 316 SS, Monel® Brass, 316 SS, Monel® Brass, 316 SS, Monel®
Non-WettedComponents
Case Aluminum, black epoxy coated Phenolic Aluminum, black epoxy coated
Window Material
Glass, safety glass, acrylic Glass, safety glass, acrylic Glass, safety glass, acrylic
Ring Steel, black epoxy coated Polycarbonate Polypropylene
Back Cover Polypropylene Polypropylene Polypropylene
ProcessTemperatureLimits
Dry-20°F to 150°F(-29°C to 66°C)
-20°F to 150°F(-29°C to 66°C)
-20°F to 150°F(-29°C to 66°C)
RangesPressure 0/10 IWC to 10 psi 0/10 IWC to 10 psi 0/10 IWC to 10 psi
Units IWC, psi IWC, psi IWC, psi
WeatherProtection
Dry CaseCase is not sealed, recommended for weather protected environment only
Case is not sealed, recommended for weather protected environment only
Case is not sealed, recommended for weather protected environment only
2018_qg2_all_products_sg_RevA.indd 7 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
8
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
1008 1008 - Center Back 1008
Specifications
Dial Sizes 63mm, 100mm 63mm, 100mm 40mm, 50mm
AccuracyDry: ±1.6% of span
Liquid filled: ±2% of span±3-2-3% of span
(ASME B40.100 Grade B)±3-2-3% of span
(ASME B40.100 Grade B)
DampeningLiquid Filled and PLUS!™ Performance,
(see data sheet for more options)Liquid Filled and PLUS!™ Performance,
(see data sheet for more options)Liquid Filled and PLUS!™ Performance,
(see data sheet for more options)
ProcessConnection
1/8 NPT, ¼ NPT, ½ NPT Male (see data sheet for more options)
1/8 NPT, ¼ NPT Male (see data sheet for more options)
1/8 NPT, ¼ NPT Male (see data sheet for more options)
Process Connection
Location
Lower, lower back (see data sheet for more options)
Center back (see data sheet for more options)
Lower, center back(see data sheet for more options)
Mounting Options
Stem, surface, flush Stem, flush Stem, flush
WettedComponents
Bourdon Tube 316L SS 316 SS 316L SS
Process Connection
316 SS 316 SS 316 SS
Non-WettedComponents
Case 304 SS or 316L SS304 SS with Buna-N
O-Ring Seal304 SS or 316L SS
Window Material Polycarbonate Polycarbonate Polycarbonate
Ring 304 SS, Crimped or 316L SS 304 SS, Crimped 316 SS, Crimped
ProcessTemperatureLimits
Dry-40°F to 250°F
(-40°C to 121°C)-40°F to 250°F
(-40°C to 121°C)-40°F to 250°F
(-40°C to 121°C)
PLUS! ™-40°F to 200°F(-40°C to 93°C)
NA NA
FlutterGuard™ NA -40°F to 250°F(-40°C to 121°C)
-40°F to 250°F(-40°C to 121°C)
Glycerin Fill20°F to 200°F(-7°C to 93°C)
20°F to 200°F(-7°C to 93°C)
20°F to 200°F(-7°C to 93°C)
Silicone Fill-40°F to 200°F(-40°C to 93°C)
-40°F to 200°F(-40°C to 93°C)
-40°F to 200°F(-40°C to 93°C)
Halocarbon® Fill-40°F to 200°F(-40°C to 93°C)
-40°F to 200°F(-40°C to 93°C)
-40°F to 200°F(-40°C to 93°C)
RangesPressure Vacuum, compound, 15 to 15,000 psi Vacuum, compound, 15 to 20,000 psi
40mm: Vacuum, compound, 15 to 15,000 psi50mm: Vacuum, compound, 15 to 20,000 psi
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa
WeatherProtection
Plug closed: IP65/NEMA 4 Plug vented: IP54
Plug closed: IP65/NEMA 4 Plug vented: IP54/NEMA 3
IP66/NEMA 4
Approvals CRN, RoHS, PED CRN, RoHS, PED CRN, RoHS, PED
Industrial Pressure Gauges
2018_qg2_all_products_sg_RevA.indd 8 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
9
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Industrial Pressure Gauges
1009 Duralife® 1009 2008
Specifications
Dial Sizes 2½˝, 3½˝ 4½˝, 6˝ 63mm
AccuracyDry: ±1% of span
(ASME B40.100 Grade 1A)Liquid filled: ±1.5% of span
±1% of span (ASME B40.100 Grade 1A)
Dry: ±1.6% of spanLiquid filled: ±2% of span
DampeningLiquid Filled and PLUS!™ Performance,
(see data sheet for more options)Liquid Filled and PLUS!™ Performance,
(see data sheet for more options)Liquid Filled and PLUS!™ Performance,
(see data sheet for more options)
Process Connection
1/8 NPT, ¼ NPT, ½ NPT Male (see data sheet for more options)
¼ NPT, ½ NPT Male (see data sheet for more options)
1/8 NPT, ¼ NPT, Male (see data sheet for more options)
Process Connection
Location
Lower, lower back (see data sheet for more options)
Lower, lower back(see data sheet for more options)
Lower back (see data sheet for more options)
Mounting Options
Stem, surface, flush Stem, surface, flush Panel
WettedComponents
Bourdon Tube 316L SS Bronze, 316L SS, Monel® 316L SS
Process Connection
Aluminum Bronze, 316L SS Brass, 316L SS, Monel® 316L SS
Non-WettedComponents
Case 304 SS or 316L SS 304 SS 304 SS or 316L SS
Window Polycarbonate, safety glass, polysulfone Glass, polycarbonate, safety glass Polycarbonate
Ring 304 SS or 316L SS 304 SS, Bayonet 304 SS or 316L SS
ProcessTemperatureLimits
Dry -40°F to 250°F (-40°C to 121°C) -40°F to 250°F (-40°C to 121°C) -40°F to 250°F (-40°C to 121°C)
PLUS! ™ -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C)
Glycerin Fill 20°F to 200°F (-7°C to 93°C) 20°F to 150°F (-7°C to 66°C) 20°F to 200°F (-7°C to 93°C)
Silicone Fill -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C)
Halocarbon® Fill -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C)
RangesPressure Vacuum, compound, 15 to 15,000 psi Vacuum, compound, 15 to 30,000 psi Vacuum, compound, 15 to 15,000 psi
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa
WeatherProtection
Plug closed: IP65/NEMA 4 Plug vented: IP54
Liquid filled: IP65/NEMA 4 Dry case: IP54
Plug closed: IP65/NEMA 4Plug vented: IP54
Approvals CRN, RoHS, PED CRN, PED RoHS
2018_qg2_all_products_sg_RevA.indd 9 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
10
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
1017 1220 1010
Specifications
Dial Sizes 4½˝, 6˝ 4½˝, 6˝, 8½˝ 4½˝, 6˝, 8½˝, 12˝
Accuracy±1% of span
(ASME B40.100 Grade 1A)±1% of span
(ASME B40.100 Grade 1A)±1% of span
(ASME B40.100 Grade 1A)
Dampening OptionsPLUS!™ Performance
(see data sheet for more options)PLUS!™ Performance
(see data sheet for more options)PLUS!™ Performance
(see data sheet for more options)
Process Connection¼ NPT, ½ NPT
(see data sheet for more options)¼ NPT, ½ NPT
(see data sheet for more options)¼ NPT, ½ NPT
(see data sheet for more options)
Process ConnectionLocation
Back (see data sheet for more options)
Lower, lower back (see data sheet for more options)
Lower, lower back (see data sheet for more options)
Mounting Options Stem, flush Stem, surface, flush Stem, surface, flush
WettedComponents
Bourdon Tube Bronze, 316L SS, Monel® Bronze, 316L SS, Monel® Bronze, 316L SS, Monel®
Process Connection Bronze, 316L SS, Monel® Bronze, 316L SS, Monel® Bronze, 316L SS, Monel®
Non-WettedComponents
Case Material Black epoxy coated aluminum, solid front4½˝: Black phenolic, solid front
6˝: Black polypropylene, solid front8½˝: Black aluminum, solid front
Black epoxy coated aluminum, solid front
Window Material Glass, acrylic, safety glass Glass, acrylic, safety glass Glass, acrylic, safety glass
Ring4½˝, 6˝: Aluminum - blacktextured enamel, hinged
4½˝: Threaded polycarbonate6˝: Bayonet lock, polypropylene
8½˝: Hinged steel, black enamel
4½˝, 6˝: Reinforced polyproplyene, threaded8½˝: Black epoxy coated, hinged
12˝: Black epoxy coated steel, slip fit
Process Temperature Limits
Dry -20°F to 250°F (-29°C to 121°C) -20°F to 250°F (-29°C to 121°C) -20°F to 250°F (-29°C to 121°C)
PLUS!™ -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C) -40°F to 200°F (-40°C to 93°C)
RangesPressure Vacuum, compound 15 to 20,000 psi Vacuum, compound 15 to 30,000 psi Vacuum, compound 15 to 30,000 psi
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa
WeatherProtection
Case not sealed, recommended for weather protected environment only
Case not sealed, recommended for weather protected environment o
Case not sealed, recommended for weather protected environment o
Approvals CRN CRN CRN
Industrial Pressure Gauges
2018_qg2_all_products_sg_RevA.indd 10 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
11
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Industrial Pressure Gauges
1038 Duplex 1339A 1490 1495
Specifications
Dial Sizes 4½˝ 4½˝ 2½˝, 3½˝ 2½˝, 3½˝
Accuracy±2-1-2% of span
(ASME B40.100 Grade A)±2-1-2% of span
(ASME B40.100 Grade A)±2-1-2% of span
(ASME B40.100 Grade A)±2-1-2% of span
(ASME B40.100 Grade A)
Dampening Options NA NA FlutterGuard™ FlutterGuard™
Process Connection ¼ NPT Male ¼ NPT Male1⁄8 NPT, ¼ NPT Male
See data sheet for more options1⁄8 NPT, ¼ NPT Male
Process Connection Location
Lower, lower back Back onlyLower, center back,
top, right, leftLower, center back,
top, right, left
Mounting Options Stem, surface Stem, flush Stem, flush, U-Clamp Stem, flush, U-Clamp
WettedComponents
Bourdon Tube Grade A phosphor bronze Grade A phosphor bronzeBeryllium copper diaphragm,
brass, polysulfone, RTV SiliconeBeryllium copper diaphragm,
brass, polysulfone, RTV Silicone
Process Connection Brass Brass Brass Brass
Non-WettedComponents
Case Material Black epoxy coated aluminum Black epoxy coated aluminum Black, glass filled polysulfone Black, glass filled polysulfone
Window Material Glass GlassPolycarbonate - threaded ¼ turn
Polycarbonate - threaded ¼ turn
Ring Black epoxy coated aluminum Black epoxy coated aluminum NA NA
Process Temperature Limits
Dry -20°F to 250°F (-29°C to 121°C) -20°F to 250°F (-29°C to 121°C) -20°F to 200°F (-29°C to 93°C) -20°F to 200°F (-29°C to 93°C)
RangesPressure
Lowest range 30 psi, compound to 1,000 psi
Lowest range 30 psi, compound to 1,000 psi
Vacuum, compound, 0/10 IWC to 15 psi
0/100% percent, 0/10 square root, 0/100 linear, 3-15# input
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, IWC, cmWC, ozWC, kPa psi
Approvals CRN CRN
2018_qg2_all_products_sg_RevA.indd 11 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
12
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
8008A 1008A/AL 1005/1005P/1005S 1005P-XUL
Specifications
Case Size63mm
100mm63mm100mm
1½˝, 2˝ (1005S)1½˝, 2˝, 2½˝, 3½˝ (1005)
1½˝, 2˝, 2½˝, 3½˝ (1005P)3½˝
Accuracy
63mm: ±1.6% of span per (EN837-1)±1% of span per (EN837-1)
±2-1-2% of span (ASME B40.100 Grade A)
100mm: ±1% of span per (EN837-1)
±3-2-3% of span (ASME B40.100 Grade B)
±3-2-3% of span (ASME B40.100 Grade B)
±3-2-3% of span (ASME B 40.100 Grade B)
Dampening OptionsLiquid filled, FlutterGuard™,
restrictorsFlutterGuard™, restrictors FlutterGuard™, restrictors
ProcessConnection
63mm: 1/8 NPT, ¼ NPT Male,G ¼ B Male, ¼ BSPT, SAE-4
7⁄16-20, M14 x 1.5100mm: ¼ NPT, ½ NPT Male,
G ¼ B, G ½ B Male, ¼ BSPT, M20 x 1.5
¼ NPT Male, JIS, DIN, others on application
1/8 NPT, ¼ NPT Male ¼ NPT Male
ProcessConnection
Location
63mm: Lower, center back100mm: Lower, lower back
Lower, center backLower, center back, left (9
o’clock), right (3 o’clock), topLower
Wetted Components
Bourdon Tube Bronze, 316 SS Bronze, 316 SS Bronze Bronze
ProcessConnection
Brass Brass, with O-Ring case seal Brass Brass
RestrictorBrass, orifice size from 0.007˝
to 0.063˝
Brass, 0.013˝ orifice (except for vacuum to 15 psi ranges) Optional: 0.007˝ to 0.063˝
Brass, 013˝ orifice on ranges >1,000 psi (only 1005/1005P) Optional: 0.007˝ to 0.063˝
Non-Wetted Components
Case Material 304 SS 304 SS1005: Black painted steel
1005P: Black ABS1005S: SS
ABS (Polycarbonate blend)
Window Polycarbonate, glass, safety glass Polycarbonate Polycarbonate Polycarbonate
Ring 304 SS, crimped 304 SS, crimped
Process Temperature Limits
Dry -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C) -40°F to 150°F (-40°C to 66°C) -40°F to 150°F (-40°C to 66°C)
Glycerin Fill -4°F to 158°F (-20°C to 70°C) -4°F to 158°F (-20°C to 70°C)
Silicone Fill -40°F to 158°F (-40°C to 70°C) -40°F to 158°F (-40°C to 70°C)
Ranges
PressureBronze: Vacuum, compound to
8,700 psi316 SS: 10,000 to 15,000 psi
Bronze: Vacuum, compound to6,000 psi
316L SS: 10,000 to 15,000 psi
1½˝: Vacuum to 1,000 psi2˝ to 3½˝: Vacuum, compound
to 6,000 psi
0 to 300 psi (water)0-80 retard to 250 psi (air)
0 to 600 psi
Unitspsi, bar, kPa, MPa, kg/cm2
(available in single or dual scale)
psi, Options: bar, kPa, kg/cm2
(metric ranges)
psi, Options: bar, kPa, kg/cm2
psi, bar, kPa, (single, dual or triple scale)
Weather ProtectionIP66; NEMA 4 for water and
dust ingressWeather resistant Weather resistant Weather resistant
Approvals RoHS, PED, REACH, CRN CRN
CRN, Options: 1005/1005P (2˝): UL404 High pressure gas,
1,000-4,000 psiUL252 Compressed gas regulator
accessories, 30-300 psi
UL 393 listed, UL Canada listed, FM approved
Commercial Pressure Gauges
2018_qg2_all_products_sg_RevA.indd 12 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
13
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Commercial Pressure Gauges
1000/2071A 12DDG/15DDG 23DDG
Specifications
Case Size 4½˝12DDG: 1¼˝15DDG: 1½˝
23mm
Accuracy
1000: ±3-2-3% of span (ASME B 40.100 Grade B)
2071A: ±2-1-2%(ASME B40.100 Grade A)
±2% at setpoint (setpoint is normally 50% of span)
UL Listed – 3.5% of span in middle three fifths of scale
±5% of span
Dampening Options
FlutterGuard™, restrictors Silicone dampened tube, restrictors Silicone dampened tube, restrictors
ProcessConnection
¼ NPT Male 1/8 NPT, ¼ NPT Male 1/8 NPT Male
ProcessConnection
LocationLower Center back Center back
WettedComponents
Bourdon Tube Bronze Beryllium copper coil Beryllium copper coil
ProcessConnection
Brass Brass Brass
Restrictors Options: Brass, 0.007˝ to 0.063˝Safety plug on UL gauges 1,500 to 4,000 psi
Options: Brass, 0.007˝ to 0.063˝Options: Brass, 0.007˝ to 0.063˝
Non-WettedComponents
Case Material1000: Black painted steel
2071A: Black painted aluminum with back flangeSS ABS blend
Window Material
1000: Polycarbonate2071A: Glass
Polycarbonate Polycarbonate
Ring1000: Black painted steel
2071A: Chrome plated steel
ProcessTemperatureLimits
Dry -40°F to 150°F (-40°C to 65°C) -40°F to 150°F (-40°C to 65°C) -40°F to 150°F (-40°C to 65°C)
Ranges
Pressure1000: Vacuum, compound to 6,000 psi2071: Vacuum, compound to 600 psi
*0/60, 0/100, 0/160, 0/200, 0/300, 0/700, 0/1200, 0/1500, 0/2000, 0/3000, 0/4000 psi*Reference individual data sheet for pressure
range dial arc
*0/60, 0/100, 0/160, 0/200, 0/300 psi*Reference individual data sheet for pressure
range dial arc
Unitspsi,
Options: bar, kPa, kg/cm2psi,
Options: bar, kPa, kg/cm2psi,
Options: bar, kPa, kg/cm2
Weather Protection
Weather resistant Weather resistant Weather resistant
Approvals CRNCRN
Options: UL 404, High pressure gas(1,500 to 4,000 psi)
CRN
2018_qg2_all_products_sg_RevA.indd 13 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
14
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
1001T 1001T-Refrigerant Gauge 1007P-Refrigerant Gauge
Specifications
Case SizeU-Clamp mount: 1½˝, 2˝, 2½˝, 3 1½˝
Front flange mount: 2˝, 2½˝2½˝, 3½˝ 2½˝
Accuracy ±3-2-3% of span (ASME B 40.100 Grade B)±1% at zero, ±2% three fourths of scale,
±5% last fourth of scale±1% at zero, ±2% three fourths of scale,
±5% last fourth of scale
Dampening Options
FlutterGuard™, restrictors FlutterGuard™, restrictors FlutterGuard™, restrictors
ProcessConnection
1⁄8 NPT, ¼ NPT Male 1⁄8 NPT, ¼ NPT Male 1⁄8 NPT Male
Process Connection
LocationCenter back Center back Lower
WettedComponents
Bourdon Tube Bronze Bronze Bronze
ProcessConnection
Brass Brass Brass
RestrictorsBrass, 0.013˝ orifice in gauges 1,000 psi and
above, Options: 0.007˝ to 0.063˝Brass, 0.013˝,
Options: 0.007˝ to 0.063˝Brass, 0.020˝,
Options: 0.007˝ to 0.063˝
Non-WettedComponents
Case Material Steel Black painted steelBlue ABS (low pressure)Red ABS (high pressure)
Window Material
Polycarbonate ¼ turn thread, polycarbonate Threaded polycarbonate
ProcessTemperatureLimits
Dry -40°F to 150°F (-40°C to 65°C) -40°F to 150°F (-40°C to 65°C) -40°F to 150°F (-40°C to 65°C)
Ranges
Pressure1½˝: Vacuum to 1,000 psi
2˝ to 3½˝: Vacuum, compound to 6,000 psi
Refrigerants R502/R22/R12/R134A:30 inHg vac./0/120 psi retard to 250 psi;
0 to 500 psi;Refrigerant 410A: 30 inHg vac./0/350 psi
retard to 500 psi; 0 to 800 psi
Refrigerants R502/R22/R12/R134A:30 inHg vac./0/120 psi retard to 250 psi;
0 to 500 psi;Refrigerant 410A: 30 inHg vac./0/350 psi
retard to 500 psi; 0 to 800 psi
Unitspsi,
Options: bar, kPa, kg/cm2psi psi
Weather Protection
Weather resistant Weather resistant Weather resistant
Approvals CRN CRN CRN
Commercial Pressure Gauges
2018_qg2_all_products_sg_RevA.indd 14 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
15
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Digital Pressure Gauges
DG25 2084, 2086, 2089
Specifications
Dial Sizes 2½˝ 3˝
Accuracy±0.5% of span (ASME B40.7 Grade 2A)
±0.25% of span (ASME B40.7 Grade 3A) (OPT.)
2089: ±0.05% of span 2086: ±0.10% of span 2084: ±0.25% of span
Display 5 digit LCD 5 digit LCD
Process Connection1⁄8 NPT, ¼ NPT
(see data sheet for more options)¼ NPT
Process Connection Location Lower Lower, left, right, top
Mounting Stem Stem, panel (OPT.)
Battery Life 2,000+ hours 1,000 hours
Shock MIL-STD-202G, Method 201A NA
Vibration MIL-STD-202G, Method 213B, Test Condition K NA
WettedComponents
Diaphragm 17-4PH 316 SS
Process Connection 316L SS 316 SS
Joints Laser welded
Non-WettedComponents
Case/Back Cover Polycarbonate/ABS 304 SS
Window Polycarbonate
ProcessTemperatureLimits
Battery Installed -4°F to 140°F (-20°C to 60°C)0°F to 150°F (-18°C to 65°C)
Fully temperature compensated
RangesPressure Vacuum, compound, gauge to 25,000 psi Vacuum, compound, gauge, absolute to 7,000 psi
Units psi, bar, inHg, cmHg, mmHg, kPa, MPa, kg/cm2, custompsi, bar, inHg, inH2O, cmH2O, mmH20, mmHg, kPa,
MPa, mbar, ftSW, kg/cm2
Overpressure Rating (F.S.)
Proof15 to ≤2,000 psi: 2X
≥3,000 to ≤5,000 psi: 1.5X ≥7,500 to ≤20,000 psi: 1.2X
Vac to ≤300 psi: 2X Range ≥300 to ≤3,000 psi: 2X Range
≥5,000 to ≤7,000 psi: 2X Range
Burst15 to ≤2,000 psi: 8X
≥3,000 to ≤5,000 psi: 3X ≥7,500 to ≤20,000 psi: 1.5X
Vac to ≤300 psi: 3X Range ≥300 to ≤3,000 psi: 5X Range
≥5,000 to ≤7,000 psi: 2X Range
WeatherProtection
Enclosure Rating IP67 IP65
Approvals CRN, CE, UL 61010, cUL CRN, FM/CSA Intrinsically Safe
2018_qg2_all_products_sg_RevA.indd 15 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
16
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
2074, 2174, 2274
Specifications
Dial Sizes 3˝, 4½˝
Accuracy ±0.25% of span, terminal point
Display 5 digit LCD
Process Connection ¼ NPT (see data sheet for more options)
Process Connection Location Lower, left, right, top
Battery Life3˝: >450 hours
4½˝: >2,500 hours
Power Requirements2074: Battery powered
2174: Loop Powered 4-20 mA (12-36 Vdc)2274: DC line powered (12-36 Vdc)
WettedComponents
Diaphragm 17-4PH
Process Connection 316 SS
Joints Laser welded
Non-WettedComponents
Case3˝: 304 SS
4½˝: Fiberglass reinforced thermoplastic or black epoxy coated aluminum
ProcessTemperatureLimits
Dry 14°F to 140°F (-10°C to 60°C)
RangesPressure Vacuum to 20,000 psi
Unitspsi, inH2O (with three temp. OPT.: 20°C, 60°F, 4°C), ftH2O, mPa, mbar, kPa, kg/cm2, bar, inHg and
mmHg (Units available are based on F.S. range of gauge)
Overpressure Rating (F.S.)
Proof15 to ≤2,000 psi: 2X
≥3,000 to ≤5,000 psi: 1.5X ≥7,500 to ≤20,000 psi: 1.2X
Burst15 to ≤2,000 psi: 8X
≥3,000 to ≤5,000 psi: 3X ≥7,500 to ≤20,000 psi: 1.5X
WeatherProtection
Enclosure Rating IP65, Weatherproof
Approvals CRN, FM/CSA Intrinsically Safe
Digital Pressure Gauges
2018_qg2_all_products_sg_RevA.indd 16 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
17
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Differential Pressure Gauges
1130 1131 1132 1133 1134
Specifications
Dial Size 2˝, 2½˝, 3½˝, 4˝, 4½˝, 6˝ 2½˝, 3½˝, 4˝, 4½˝, 6˝ 2½˝, 3½˝, 4˝, 4½˝, 6˝ 3½˝, 4˝, 4½˝, 6˝ 4½˝
Accuracy ±2% ascending (FSD) ±2% ascending (FSD) ±2% ascending (FSD) ±2% ascending (FSD) ±3% ascending (FSD)
Process Connection ¼ NPT Female ¼ NPT Female ¼ NPT Female ¼ NPT Female
1⁄8 NPT Female
Process Connection
LocationIn-Line, lower, back In-Line, lower, back In-Line, lower, back In-Line, lower, back Dual In-Line, back
Mounting Options Inline, panel, surface, pipe Inline, panel, surface, pipe Inline, panel, surface, pipe Inline, panel, surface, pipe Inline, panel, surface, pipe
Migration Minor Zero Zero Zero Zero
Wetted Material
Actuator Teflon piston,ceramic magnet, SS springRolling diaphragm,
ceramic magnet, SS springConvoluted diphragm,
ceramic magnet, SS springConvoluted diphragm,
ceramic magnet, SS springConvoluted diaphragm,
ceramic magnet, SS spring
O-Ring/Diaphragm
Buna-N (optional material available)
Buna-N (optional material available)
Buna-N (optional material available)
Buna-N (optional material available)
Buna-N (optional material available)
Body Material Aluminum, brass, SS Aluminum, brass, SS Aluminum, brass, SS Aluminum, SS Glass filled nylon
Non-Wetted Material
Case Material SS SS SS SS SS
Window Glass Glass Glass Glass Glass
Process Temperature
Dry 175°F (80°C) 175°F (80°C) 175°F (80°C) 175°F (80°C) 140°F (60°C)
Glycerine 150°F (66°C) 150°F (66°C) 150°F (66°C) 150°F (66°C) 140°F (60°C)
Silicone 175°F (80°C) 175°F (80°C) 175°F (80°C) 175°F (80°C) 140°F (60°C)
Ranges
Differential Pressure Ranges
0-5 psid to 150 psid 0-5 psid to 100 psid 0-1 psid to 60 psid 0-1 IWD to 25 IWD 0.6-1 IWD to 60 IWD
Static Pressure up to 6,000 psi 3,000 psi 1,500 psi 500 psi 35 psi
2018_qg2_all_products_sg_RevA.indd 17 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
18
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Differential Pressure Gauges
1125 & 1125A 1127 & 1128 5503 F5509 & F6509
Specifications
Dial Sizes 4½˝, 6˝ 4½˝, 6˝ 4˝ (100mm), 6˝ (160mm) 4˝ (100mm), 6˝ (160mm)
Accuracy±2-1-2% of span
(ASME B40.100 Grade A)±2-1-2% of span
(ASME B40.100 Grade A)±1.6% of span ±1.6% of span
Process Connection ¼ NPT Male ¼ NPT Male ¼, ½ NPT Male or Female,
G½B Male ¼, ½ NPT Male or Female,
G½B Male
Process Connection Location
Lower, back Lower, back Lower Lower
Mounting Options Stem, surface Stem, surface Stem, wall, pipe Stem, wall, pipe
Wetted Material
Bourdon Tube Grade A Phospor bronze 316 SS NA NA
Process Connection Bronze 316 SS 316 SS 316 SS
Diaphragm NA NA316 SS, Duratherm 600®,
Inconel®, Hastelloy®, Monel®316 SS, Duratherm 600®
Housing NA NA 316 SSL, Hastelloy® C276 316 SSL
Non-Wetted Materials
Case MaterialCast aluminum,
black epoxy coatedCast aluminum,
black epoxy coated304 SS, 316 SS (OPT.) 316 SS
Window Glass Glass Shatterproof glass Shatterproof glass
Ring Aluminum Aluminum Bayonet Bayonet
Process Temperature Limits
Dry-20°F to 250°F
(-29°C to 121°C)-20°F to 250°F
(-29°C to 121°C)-4°F to 185°F
(-20°C to 85°C)-4°F to 185°F
(-40°C to 100°C)
Glycerine Fill NA NA-20°F to 150°F(-7°C to 66°C)
-20°F to 150°F(-7°C to 100°C)
Silicone Fill NA NA-40°F to 200°F(-40°C to 93°C)
-40°F to 200°F(-40°C to 100°C)
Ranges
Differential Pressure
1125: 10 to 1,000 psid1125A: 5 to 500 psid
1127: 10 to 1,000 psid1128: 5 to 500 psid
1 to 600 psid 1 to 400 psid
Static PressureRange dependent
See details on product page or data sheet
Range dependentSee details on product page or
data sheet
1,450 psi3,625 psi for ranges 10 psid
(OPT.)
232 psi for ranges from 1 to 4 psi
580 psi for range of 6 psi to 400 psi
Units psid, kg/cm2, bar, kPa psid, kg/cm2, bar, kPa psid, mbar, bar, IW psid, mbar, bar, IW
WeatherProtection
Case not sealed, recommended for weather protected
environment only
Case not sealed, recommended for weather protected
environment only
Dry: IP65Hermetically sealed/Liquid: IP66
IP66
Approvals CRN, CE, ATEX (OPT.)
2018_qg2_all_products_sg_RevA.indd 18 8/27/18 9:32 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
19
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Sanitary Pressure Gauges
1032 Sanitary 1032 Fractional 1036 Gauge/1037Fitting 2030 Series
Specifications
Dial Size 2½˝, 3½˝, 4½˝ 2˝ 3½˝ 3˝
Display Type Analog Analog Analog Digital - Full 5 Digit LCD
Accuracy
±1.5% of span (pressure ranges>100 psi)
±2% of span (Vacuum, compound to 100 psi)
Upscale: ±3% of spanDownscale: ±5% of span
±1.5% of span (pressure ranges>100 psi)
±2% of span (Vacuum, compound to 100 psi)
±0.25% of span, terminal point
Power Supply NA NA NA2032, 2036: Battery
2132, 2136: 4-20 mA Loop2232, 2236: 12-36 Vdc
Switches NA NA NA 2232, 2236: 1 or 2 SPDT (OPT.)
DampeningOptions
PLUS!™ Performance or liquid filled case.
FlutterGuard™PLUS!™ Performance or
liquid filled case. Settings per 100ms: None,
average, 2, 4, 6, 8
ProcessConnection
1½˝ Tri-Clamp® and 2˝ Tri-Clamp® 3/4˝ Tri-Clamp® 1½˝ Tri-Clamp®2032, 2132, 2232: Tri-Clamp®
2036, 2136, 2236: Inline
ProcessConnection
LocationLower, lower back Lower Lower Lower, top, right, left
Mounting Options Capillary with Tri-Clamp® Capillary with Tri-Clamp®1036: Tri-Clamp® mates with:1037: ½˝ to 2˝ inline sanitary
fittingTri-Clamp®
WettedComponents
Diaphragm 316L SS, Electropolished 316L SS, Electropolished 316L SS, Electropolished 316L SS, Electropolished
Seal Housing 316L SS, Electropolished 316L SS, Electropolished 316L SS, Electropolished 316L SS, Electropolished
Seal Suface Finish 12-20 RA 12-20 RA 12-20 RA 12-20 RA
Non-WettedComponents
Case 304 SS, Electropolished 304 SS, Electropolished 304 SS, Electropolished 304 SS, Tumbled
WindowPolycarbonate, glass
safety glass, polysulfoneGlass, safety glass,
polycarbonatePolycarbonate,
polysulfone, safety glassNA
Ring304 SS, Electropolished,
bayonet, removeable304 SS, Electropolished,
friction fit304 SS, Electropolished NA
Assembly Fill FluidDistilled water, USP food grade glycerin, food grade silicone, Neobee® M-20, mineral oil
USP food grade glycerin, Neobee® M-20, mineral oil
Distilled water, USP food grade glycerin, food grade silicone, Neobee® M-20, mineral oil
USP food grade glycerin, food grade silicone,
mineral oil
RangesPressure
Vacuum, compound, 15 to 1,000 psi
Compound, 30 to 600 psiVacuum, compound,
15 to 1,000 psiVacuum, compound, gauge
to 7,000 psi
Units psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa psi, bar, kg/cm2, kPa
WeatherProtection
IP65
Approvals CRN, RoHS, 3A CRN, RoHS CRN, RoHS, 3A CRN
2018_qg2_all_products_sg_RevA.indd 19 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
20
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Test Gauges
A4A 1082 1084
Specifications
Dial Size 6˝, 8½˝, 12˝, 16˝ 4½˝, 6˝, 8½˝ 3˝
Accuracy ±0.1% of span (ASME B40.100 Grade 4A) ±0.25% of span (ASME B40.100 Grade 3A) ±0.5% of span (ASME B40.100 Grade 2A)
Process Connection
¼ NPT, 1/8 NPT, others available see data sheet
¼ NPT, ½ NPT ¼ NPT
Process Connection
LocationBack, bottom Lower, back Lower
Mounting Options
Stem Stem, flush Stem
Pointer Black painted aluminum pointerAluminum with red-painted,
knife-edge tipAluminum with red-painted knife edge tip
Pointer Travel350°: up to 30,000 psi
300°: 40,000 to 50,000 psi270°: 60,000 to 100,000 psi
270° 270°
Movement Hardened clock brass 400 Series SS SS
Window6˝, 8½˝, 12˝: Plexiglass
16˝: Plate glassGlass Polycarbonate
Wetted Materials
Bourdon Tube Berylium copper, 403 SS Bronze, Monel® 316 SS
Process Connection Materials
303 SS Brass, Monel® 316 SS
Non-Wetted Materials
Case Material Aluminum Aluminum 316 SS
Enclosure Rating
Case is not sealed, recommended for weather protected environment only
Hinged steel, black wrinkle finish
2018_qg2_all_products_sg_RevA.indd 20 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
21
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
PRESSURESWITCHES
PRESSURE & DIFFERENTIAL PRESSURE SWITCHES
A-Series Watertight & Explosion Proof ...... 22
B4, B7, D4, D7 Series ................................... 22
G, L, Series ................................................... 22
P Series ........................................................ 23
F Series .........................................................23
DDS Series ................................................... 23
N Series ....................................................... 23
2018_qg2_all_products_sg_RevA.indd 21 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
22
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure and Differential Pressure Switches
A-SeriesPressure
B-SeriesPressure & Differential
Pressure
L-Series / G-SeriesPressure & Differential
Pressure
Specifications
Accuracy ±2% of span ±1% of span ±1% of span
Enclosure Rating
Watertight: IP67, NEMA 6Explosion Proof: IP67, NEMA 4X, 7,9
B4: Watertight: IP66, NEMA 3, 4, 4X, 13B7: Explosion Proof: IP66, NEMA 7, 9
WatertightL-Series: IP66, NEMA 4, 4XG-Series: IP65, NEMA 4, 4X
Switch Elements SPDT, DPDT SPDT, DPDT SPDT, 2 SPDT, DPDT (OPT.)
SetpointSingle - Factory set, or field adjustable
Single - Factory set, or field adjustable
Single or dual (independently adjustable)field adjustable or factory set
Deadband Fixed Fixed, variableAdjustable (SPDT only)Fixed SPDT or 2 SPDT
Process Connection
Size
NPT Male or Female, SAE, G Style, VCR, VCO, Tri-Clamp®
NPT Male or Female, Tri-Clamp®
NPT Male or Female, Tri-Clamp®
Mounting Direct Direct, surface, pipe Direct, surface, pipe
Wetted Material
Process Connection
316 SSPressure: 316 SS, Monel® or epoxy coated
carbon steel, Differential: nickel plated brass or 316 SS
Pressure: 316 SS, Monel® or epoxy coated carbon steel,
Differential: nickel plated brass or 316 SS
Actuator Seal
316 SS Welded Diaphragm316 SS Piston & Buna-N O-Ring 316 SS Piston & Viton® O-Ring316 SS Piston & HBNR O-Ring
316L SS, Monel®, Buna-N, Viton®, Teflon® 316L SS, Monel®, Buna-N, Viton®, Teflon®
Non-Wetted Materials
Case Material 316 SSEpoxy coated aluminum
316 SS (OPT.)L-Series: Epoxy coated aluminum
G-Series: 316 SS
Ranges
PressureVacuum,
compound to 15,000 psiVacuum, compound to 3,000 psi
Vacuum, compound to 3,000 psi
Differential Pressure NA 10 IWC to 600 psi 30 IWC to 400 psi
Units psi, bar, kPa, kg/cm2 IWC, psi, bar, kPa, kg/cm2 IWC, psi, bar, kPa, kg/cm2
Approvals
Watertight UL, CSA, CE, CRN, SIL 3 capable, RoHSUL, CSA, FM,
CE, CRN, SIL 3 Capable, RoHS
UL, CSA, CE, RoHS, FM (L-Series only)
CRN
Explosion ProofUL, CSA, CE, CRN, SIL 3 capable, RoHS,
FM, ATEX, IECEx, Dual SealUL, ATEX. IECEx, CSA,
CE, CRN, SIL 3 capable, RoHS
See data sheets at www.ashcroft.com for complete product specifications.
2018_qg2_all_products_sg_RevA.indd 22 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
23
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure and Differential Pressure Switches
P-SeriesPressure &
Differential Pressure
F-SeriesPressure
N-SeriesPressure
DDSDifferential Pressure
Specifications
Accuracy ±1% of span ±1% of span ±0.50% of span ±1% of span
Enclosure Ratings
Explosion Proof: IP66, NEMA 7, 9Explosion Proof: IP66,
NEMA 3, 4, 7, 9Watertight: IP65,
NEMA 3, 4, 4X, 13Watertight NEMA 4X, 12 Explosion proof housing
Switch ElementsSPDT, 2 SPDT
with independent setpointsSPDT, DPDT SPDT SPDT, DPDT
SetpointSingle or dual (independently adjustable) field adjustable or
factory set
Single - Factory set or field adjustable
Single - Factory set or field adjustable
Single - Factory set or field adjustable
DeadbandAdjustable (SPDT only)
Fixed SPDT, 2 SPDTFixed Adjustable Fixed
Process Connection
NPT Male or Female,Tri-Clamp®
¼ NPT, ½ NPTNPT Male or Female,
Tri-Clamp® 9⁄16-18 UNF, 2B Female high pressure
¼ NPT
Mounting Direct, surface or pipe Direct Direct, surface Direct
Indicating Display NA NA Yes NA
Wetted Material
Process Connection
Pressure: 316 SS, Monel® or epoxy coated carbon steel Differential: nickel plated
plated brass, 316 SS
316 SS 316 SS Aluminum, 316 SS
Actuator Seal316L SS, Monel®, Buna-N,
Viton®, Teflon®316L SS, Buna-N, Viton®
Teflon®, SS with Viton® O-Ring17-4PH SS Buna-N, Viton®, Teflon®
Non-Wetted Materials
Case Material Epoxy coated aluminum Anodized aluminum Epoxy coated aluminum Cast aluminum
Ranges
PressureVacuum,
compound to 3,000 psiVacuum to 4,000 psi 60 to 20,000 psi NA
Differential Pressure
30 IWC to 400 psi NA NA1.5 to 150 IWC
(Static pressure capability from 50 to 1,500 psi)
Units IWC, psi, bar, kPa, kg/cm2 psi, bar, kPa, kg/cm2 psi, bar, kPa, kg/cm2 IWC, mmH20, mBar, kPa
Approvals Explosion Proof UL, CSA, CRN UL, CSA CRN UL
See data sheets at www.ashcroft.com for complete product specifications.
2018_qg2_all_products_sg_RevA.indd 23 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
24
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
2018_qg2_all_products_sg_RevA.indd 24 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
25
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
PRESSURE TRANSDUCERSG2, G3, T2 .................................................... 26
KM41/KM45, KM15 ..................................... 26
A2, A2X, A4, SL17 ........................................ 27
GC31 , GC35, GC51 ........................................28
K1, KX, KS ..................................................... 31
K2, K8 ......................................................... 31
DIFFERENTIAL PRESSURETRANSDUCERS GC55 ............................................................. 29
GC52 ............................................................. 29
GC30 ............................................................. 29
GL42 ............................................................. 29
RXLdp, XLdp, IXLdp ......................................30
CXLdp ........................................................... 30
DXLdp............................................................30
TRANSDUCERS/ TRANSMITTERS
2018_qg2_all_products_sg_RevA.indd 25 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
26
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure Transducer/Transmitter
G2 & T2 G3 KM41/KM45 KM15
Reference Temperature 72°F ±2°F (22°C±1°C) 72°F ±2°F (22°C±1°C) 72°F ±2°F (22°C±1°C) 73°F ±2°F (23°C±1°C)
Performance
Accuracy
±1% of span: -4°F to 185°F (-20°C to 85°C) ±1.5% of span: 185°F to 257°F (85°C to 125°C) -40°F to-4°F (-40°C to -20°C)
±1.5% of span: -4°F to 185°F (-20°C to 85°C) ±2.0% of span: 185°F to 257°F (85°C to 125°C) -40°F to-4°F (-40°C to -20°C)
±1.5% of span: -4°F to 185°F (-20°C to 85°C) ±2.0% of span: 185°F to 257°F (85°C to 125°C)
±3.0% of span: -22°F to 250°F (-30°C to 120°C)
Accuracy Statement
Total Error Band Method Includes: combined effects of temperature,
non-linearity, hysteresis, non-repeatability, zero offset & span
setting errors
Total Error Band Method Includes: combined effects of temperature,
non-linearity, hysteresis, non-repeatability, zero offset & span
setting errors
Total Error Band Method Includes: combined effects of temperature,
non-linearity, hysteresis, non-repeatability, zero offset & span
setting errors
Terminal Point Method Includes: hysteresis,
non-repeatability, zero offset and span setting errors
BSFL ±0.25% of span ±0.50% of span ±0.50% of span ±0.50% of span ≤75 psi ±1.00% of span ≥100 psi
Stability ≤±0.25% of span/year at refer-ence conditions≤±0.25% of span/year at refer-
ence conditionss≤±0.25% of span/year at refer-
ence conditions≤±0.25% of span/year at refer-
ence conditions
Ranges
Compound Vac to 300 psi Vac to 300 psi Vac to 300 psi Vac to 300 psi
Gauge 30 to 20,000 psi 5 to 300 psi 5 to 20,000 psi 15 to 10,000 psi
Absolute NA 15 to 300 psia 15 to 600 psia (KM45) NA
Overpressure (F.S.)
Proof Up to 2X depending on full scale pressure rangesUp to 2X depending on full scale
pressure rangesUp to 2X depending on full scale
pressure rangesUp to 2X depending on full scale
pressure ranges
Burst Up to 10X depending on full scale pressure rangesUp to 5X depending on full scale
pressure rangesUp to 5X depending on full scale
pressure rangesUp to 10X depending on full scale
pressure ranges
Output Electrical0-5 Vdc, 0-10 Vdc, 1-5 Vdc, 1-6 Vdc, 0.5-4.5 Vdc, 0.5-4.5 Vdc
(Ratiometric), 4-20 mA
0-5 Vdc, 0-10 Vdc, 1-5 Vdc, 1-6 Vdc, 0.5-4.5 Vdc, 0.5-4.5 Vdc
(Ratiometric), 4-20 mA
4-20 mA, 0-5 Vdc, 1-5 Vdc, 1-6 Vdc, 0-10 Vdc, 0.5-4.5 Vdc
(Ratiometric), 4-20 mA
0-5 Vdc, 1-5 Vdc, 0.5-4.5 Vdc (Ratiometric)
Wetted Material
Diaphragm or Sensor 17-4PH SS 316L SS
KM41: 17-4PH SS KM45: 316L SS 17-4PH SS
Connection 304L SS 316L SS KM41: 304L SS KM45: 316L SS 304L SS
Enclosure Rating
Ingress Protection IP65, IP67 IP65, IP67 IP65, IP67 IP67
Approvals CE, UL, RoHS CE, UL, RoHS CE, RoHS CE, RoHS
Hazardous Location Rating
2018_qg2_all_products_sg_RevA.indd 26 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
27
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure Transducer/Transmitter
A2 & A4 A2X SL17
Reference Temperature 70°F (21°C) 70°F (21°C) 70°F (21°C)
Performance
Accuracy ±0.25%, ±0.5%, ±1.00% of span ±0.25%, ±0.5%, ±1.00% of span ±0.25%, ±0.50% of span
Accuracy Statement
Terminal Point Method Includes: hysteresis, non-repeatability, zero offset and span
setting errors
Terminal Point Method Includes: hysteresis, non-repeatability, zero offset and span
setting errors
Terminal Point Method Includes: hysteresis, non-repeatability, zero offset and span
setting errors
BSFL ±0.20%, ±0.40%, ±0.5% of span (add ±0.5% ranges>5,000 psi)±0.20%, ±0.40%, ±0.5% of span (add
±0.5% ranges>5,000 psi) NA
Stability ≤±0.25% of span/year at reference conditions≤±0.25% of span/year at reference
conditions ≤±0.25% of span/year
Ranges
Compound Vac to 60 psi Vac to 60 psi NA
Gauge 1.5 to 10,000 psi 1.5 to 10,000 psi 1.5 to 300 psi
Absolute 15 to 7,500 psia 15 to 7,500 psia NA
Overpressure (F.S.)
Proof Vac to 300 psi: 1.5X 500 to 10,000 psi: 1.2XVac to 300 psi: 1.5X
500 to 10,000 psi: 1.2X
150 psi: 2X
Burst Vac to 300 psi: 2X 500 to 10,000 psi: 1.5XVac to 300 psi: 2X
500 to 10,000 psi: 1.5X
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
28
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure Transducer/Transmitter
GC31 GC35 GC51
Reference Temperature 73°F (23°C) 73°F (23°C) 73°F (23°C)
Performance
Accuracy ±1.0% of span ±1.0% of span ±0.25% of span
Accuracy Statement
Includes: hysteresis, linearity, non-repeatability, zero offset and span
setting errors
Includes: hysteresis, linearity, non-repeatability, zero offset and span
setting errors
Includes: hysteresis, linearity, non-repeatability, zero offset and span
setting errors
Stability ≤±0.25% of span/year ≤±0.25% of span/year
RangesCompound Vac to 300 psi Vac to 300 psi Vac to 50 psi
Gauge 0 to 1,500 psi 0 to 7,500 psi 50 to 7,500 psi
Overpressure
Proof1,000 psi: 1.5X3,000 psi: 2.5X
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
29
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure Transducer/Transmitter
GC55 GC30 GC52 GL42
Reference Temperature 73°F (23°C) 73°F (23°C) 73°F (23°C) 77°F (25°C)
Performance
Accuracy ±0.5% of span ±1.5% of span ±0.5% of span (URL) ±0.5%, ±1.0% of span
Accuracy Statement
Includes: hysteresis, linearity, non-repeatability, zero offset and span setting
errors
Includes: hysteresis, linearity, non-repeatability, zero offset and span setting
errors
Includes: hysteresis, linearity, non-repeatability, zero offset and span setting
errors
Terminal Point Method Includes: hysteresis, non-repeatability, zero offset and span setting
errors
Stability ≤±0.25% of span/year ≤±0.50% of span/year
RangesUnidirectional 75 to ≤300 psid 0.25 to 25 IWD 4 IWD to ≤ 400 IWD 0.10 to 25 IWD
Bidirectional NA±25 IWD
±0.25 to ±25±4 to ±200 IWD ±0.10 IWD to ±15 IWD
Overpressure
Proof (static) 75 to ≤300 psi: 2X 7.5 psi (50 kPa) 300 psi NA
Proof (differential) 75 to ≤300 psid: 2X 7.5 psid (50 kPa)≤8 IWD, ±4 IWD: 30 psid
≥20 IWD, ±8 IWD: 100 psid"15 psid
Burst (differential) 75 to ≤300 psi: 10X 25 psig (170 kPa)≤8 IWD, ±4 IWD: 130 psid
≥20 IWD, ±8 IWD: 130 psid"25 psid
Max Line Pressure Range of unit 7.5 psi (50 kPa) NA 25 psi
OutputElectrical 4-20 mA, 1-5 Vdc 1-5 Vdc 4-20 mA 4-20 mA
Switch OutputTTL/CMOS up to 40 Vdc/200 mA
NPN: 30 Vdc/80 mA (Max.)PNP: 1 Vdc/80 mA (Max.)
NA NA
Wetted Material
Media Compatibility
Fluids and gases compatible with 304 SS (sensor housing)
and 17-4 pH SS (sensor diaphragm)
Clean, dry air/gases compatible with Aluminum, ABS, Ceramic,
Silicon, and Silicone RTV
Fluids and gases compatible with 316L SS, Viton® and Alumina
Ceramic
Clean, dry and noncorrosive gas
NOT FOR USE ON LIQUIDS
Enclosure Rating
Ingress Protection IP66 IP40 IP65, NEMA 4 IP65
Approvals CE, RoHS CE, RoHS CE, RoHS
2018_qg2_all_products_sg_RevA.indd 29 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
30
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure Transducer/Transmitter
CXLdp DXLdp IXLdp RXLdp XLdp
Reference Temperature70°F ± 2°F
(21°C ± 1°C) 70°F ± 2°F (21°C ±1°C)
70°F ± 2°F (21°C ±1°C)
70°F ± 2°F (21°C ±1°C)
70°F ± 2°F (21°C ±1°C)
Performance
Accuracy±0.25%, ±0.4%, ±0.8% of span
±0.25%, ±0.5%, ±1.0% of span
±0.25%, ±0.5% of span
±1.0% of span±0.25%, ±0.5% of
span
Accuracy Statement
Terminal Point Method Includes: hysteresis,
non-repeatability, zero offset and span setting
errors
Terminal Point Method Includes: hysteresis,
non-repeatability, zero offset and span setting
errors
Terminal Point Method Includes: hysteresis,
non-repeatability, zero offset and span setting
errors
Terminal Point Method Includes: hysteresis,
non-repeatability, zero offset and span setting
errors
Terminal Point Method Includes: hysteresis,
non-repeatability, zero offset and span setting
errors
Stability≤±0.25% of span/year at
reference conditions≤±0.25% of span/year at
reference conditions≤±0.25% of span/year at
reference conditions≤±0.25% of span/year at
reference conditions≤±0.25% of span/year at reference conditions
RangesUnidirectional 0.10 to 25 IWD 0.10 to 50 IWD 0.10 to 200 IWD 0.10 to 50 IWD 0.10 to 50 IWD
Bidirectional ±0.10 to ±15 IWD ±0.05 to ±25 IWD ±0.05 to ±100 IWD ±0.10 to ±50 IWD ±0.05 to ±50 IWD
Overpressure
Proof (differential) 15 psid 15 psid 20 psid 15 psid 15 psid
Burst (differential) 25 psid 25 psid 50 psid 25 psid 25 psid
Max Line Pressure 25 psi 25 psi 100 psi 25 psi 25 psi
Output Electrical 0-10 Vdc (user select-able 0-5 Vdc), 4-20 mA0-5 Vdc, 1-5 Vdc, 1-6 Vdc, 0-10 Vdc,
4-20 mA
0-5 Vdc, 1-5 Vdc, 1-6 Vdc, ± 2.5 Vdc,
±5.0 Vdc, 4-20 mA
0-5 Vdc, 1-5 Vdc, 1-6 Vdc, 0-10 Vdc,
4-20 mA
1-5 Vdc, 1-6 Vdc, 4-20 mA
Wetted Material
Media Compatibility
Clean, dry and noncorrosive gas NOT FOR USE ON
LIQUIDS
Clean, dry and noncorrosive gas NOT FOR USE ON
LIQUIDS
Clean, dry and noncorrosive gas NOT FOR USE ON
LIQUIDS
Clean, dry and noncorrosive gas NOT FOR USE ON
LIQUIDS
Clean, dry and noncorrosive gas NOT FOR USE ON
LIQUIDS
Enclosure Rating
Ingress Protection NEMA 1 NEMA 1 NEMA 4X NEMA 1 NEMA 2
Approvals CE, RoHS CE, RoHS FM CE, RoHS CE, RoHS
2018_qg2_all_products_sg_RevA.indd 30 8/27/18 9:33 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
31
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Pressure Transducer/Transmitter
K1 K2 KX KS K8
Reference Temperature 68°F (20°C) 68°F (20°C) 68°F (20°C) 68°F (20°C) 68°F (20°C)
Performance
Accuracy ±0.5%, ±1.00% of span ±0.5%, ±1.00% of span ±1.00% of span ±1.00% of span ±0.5%, ±1.00% of span
Accuracy Statement
Terminal Point Method Includes: hysteresis, non-
repeatability, zero offset and span setting errors
Terminal Point Method Includes: hysteresis, non-
repeatability, zero offset and span setting errors
Terminal Point Method Includes: hysteresis, non-
repeatability, zero offset and span setting errors
Terminal Point Method Includes: hysteresis, non-
repeatability, zero offset and span setting errors
Terminal Point Method Includes: hysteresis, non-
repeatability, zero offset and span setting errors
BSFL ±0.25%, ±0.40% of span ±0.25%, ±0.40% of span ±0.75% of span ±0.75% of span ±0.25%, ±0.40% of span
Stability ≤±0.50% of span/year at reference conditions≤±0.50% of span/year at
reference conditions≤±0.50% of span/year at
reference conditions≤±0.50% of span/year at
reference conditions≤±0.50% of span/year at
reference conditions
RangesCompound Vac to 100 psi Vac to 100 psi Vac to 100 psi NA Vac to 100 psi
Gauge 15 to 20,000 psi 15 to 20,000 psi 15 to 5,000 psi 30 to 1,000 psi 45 to 20,000 psi
Overpressure (F.S.)
ProofVac to 2,000 psi: 2X
3,000 to 5,000 psi: 1.5X 7,500 to 20,000 psi: 1.2X
Vac to 2,000 psi: 2X 3,000 to 5,000 psi: 1.5X 7,500 to 20,000 psi: 1.2X
Vac to 2,000 psi: 2X3,000 to 5,000 psi: 1.5X
30 to 1,000 psi: 2XVac to 2,000 psi: 2X
3,000 to 5,000 psi: 1.5X7,500 to 20,000 psi: 1.2X
BurstVac to 2,000 psi: 8X
3,000 to 5,000 psi: 3X 7,500 to 20,000 psi: 15X
Vac to 2,000 psi: 8X 3,000 to 5,000 psi: 3X
7,500 to 20,000 psi: 15X
Vac to 2,000 psi: 8X3,000 to 5,000 psi: 3X
30 to 1,000 psi: 8XVac to 2,000 psi: 8X
3,000 to 5,000 psi: 3X7,500 to 20,000 psi: 15X
Output Electrical 4-20 mA, 0.1-10 Vdc, 1-5 Vdc, 1-6 Vdc, 1-11 Vdc 2, 3, 10, 20 mV/V4-20 mA, 0.1-10 Vdc,
1-5 Vdc, 1-6 Vdc, 1-11 Vdc
4-20 mA, 0.1-10 Vdc, 1-5 Vdc, 1-6 Vdc, 1-11 Vdc,
2, 3, 10, 20 mV/V
6-18 mV/V (Ratiometric)
Wetted Material
Diaphragm or Sensor
17-4PH SS 17-4PH SS 316 SS 316 SS 17-4PH SS
Connection 304 SS 304 SS 316 SS 316 SS 304 SS
Enclosure Rating
Ingress Protection NEMA 4X NEMA 4X NEMA 4X NEMA 4X
Approvals FM (OPT.) 3A
Hazardous Location Ratings
Intrinsically Safe for use in: Class I, II, III, Div. 1, Groups
A, B, C, D, F and G
2018_qg2_all_products_sg_RevA.indd 31 8/27/18 9:34 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
32
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
2018_qg2_all_products_sg_RevA.indd 32 8/27/18 9:34 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
33
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
DIAPHRAGM SEALS
THREADED SEALS100, 200, 300 ................................................ 34
101, 201, 301 ................................................ 34
400, 401........................................................ 34
500, 501........................................................ 34
510HP, 511HP ............................................... 34
310, 315.........................................................35
311 ................................................................35
312 ................................................................35
320 ............................................................... 35
330 ................................................................35
740, 741........................................................ 35
FLANGED SEALS102, 202, 202 ................................................ 36
103, 203, 203 ................................................ 36
402-403 ........................................................ 36
702-703 ........................................................ 36
DF Flanged ................................................... 36
106, 206........................................................ 36
IN-LINE SEALS104, 204.........................................................37
105, 205.........................................................37
106, 206, ........................................................37
107, 207.........................................................37
108, 208 ....................................................... 37
ISOLATION RINGS80, 81, 82 ...................................................... 38
Diaphragm Seal Fill Fluids ............................39
2018_qg2_all_products_sg_RevA.indd 33 8/27/18 9:34 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
34
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Threaded Diaphragm Seals
100, 200, 300 101, 201, 301 400, 401 500, 501 510, 511 510HP, 511HPProcess Connection
NPT
¼ Female/Male Female/Male Female/Male Female/Male
½ Female/Male Female/Male Female/Male Female/Male Male Male
3/4 Female/Male Female 400: F/M, 401: F 500: F/M, 501: F
1 Female/Male Female 400: F/M, 401: F 500: F/M, 501: F
Diaphragm Material 100 200 300 101 201 301
316L SS • • • • • • • •
304L SS • • • •Monel® 400 • • • • • • • •
Nickel • • • •Carpenter 20® • • • •
Tantalum • • • • • •Hastelloy® B • • • • • •
Hastelloy® C-22 • • • • • •Hastelloy® C-276 • • • • • • • •
Teflon® • • • •Viton® • • • •Kalrez® • • • •Titanium • • • •
Gold Plated/316L • •Halar Coated Monel® • •Bottom Housing Material
Steel • •304L SS • •316L SS • • • • • •
Hastelloy® B • • • •Hastelloy® C-22 • • • •Hastelloy® C-276 • • • • • •
Carpenter® 20 • •Monel® 400 • • • • • •
Inconel® • •Nickel • •PVC ¼ or ½ NPT Female
Kynar® ¼ or ½ NPT FemaleTitanium • • • •
Pressure Ratings 400 401 510HP 511HP500 psi Viton® or Kalrez® Diaphragm Viton® or Kalrez® Diaphragm
1,500 psi •2,500 psi Metal & Teflon® Diaphragm Metal & Teflon® Diaphragm5,000 psi 100 & 200 Metal Diaphragm 100 & 200 Metal Diaphragm • •9,000 psi •10,000 psi • •
Instrument Connection Size
¼ • • • •½ • • • • • •
Approvals CRN CRN CRN CRN CRN CRN
2018_qg2_all_products_sg_RevA.indd 34 8/27/18 9:34 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
35
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
310, 315 311 312 330 740, 741
Process Connection
NPT1⁄8 310: Male
¼ 310: F/M, 315: F Female/Male Female Female
½ 310: F/M, 315: F Female/Male Female Female
3/4 Male Female/Male Female
1 Male Female/Male Male Female
Diaphragm Material 310 315 740 741
316L SS • • • • •Monel® 400 • •
Tantalum • • • •Hastelloy® B • •
Hastelloy® C-22 •Hastelloy® C-276 • • • •
Titanium •
Bottom Housing Material
Steel •316L SS • • • • •
Hastelloy® B • •Hastelloy® C-22 •Hastelloy® C-276 • • • •
Carpenter® 20 •Monel® 400 • •
Titanium •Pressure Ratings
750 psi •1,000 psi • •2,500 psi •3,000 psi •Approvals CRN CRN CRN CRN CRNInstrument
Connection Size¼ • • • •½ • • • • •
Threaded Diaphragm Seals
Code 320
Process Connection15 1½20 2
Diaphragm and Bottom Housing Material S 316L SS
Instrument Connection Size02T ¼04T ½ (2˝ Only)
Approvals CRN
2018_qg2_all_products_sg_RevA.indd 35 8/27/18 9:34 AM
All specifications are subject to change without notice.
All sales subject to standard terms and conditions.
© 2018 Ashcroft Inc., all_products_sg_qg2_RevA_08-18
www.ashcroft.com
1.800.328.8258
36
Products & Features
See data sheets at www.ashcroft.com for complete product specifications.
Flanged Diaphragm Seals
102202302
103203303
402403
702703 DF
106206
Process Connection½ • • • • •3/4 • • • • •1 • • • • • •
1½ • • • • • •2 • • • • • •3 • • • • • •4 • •6 •8 •
Diaphragm Material 102 202 302 103 203 303 106 206316L SS • • • • • • • •304L SS • • • • •
Monel® 400 • • • • • • • •Nickel • • • • •
Carpenter 20® • • • • •Tantalum • • • • • • • •
Hastelloy® B • • • • • • •Hastelloy® C 22 • • • • • •
Hastelloy® C 276 • • • • • • • •Teflon® • • • • •Viton® • • • • •Kalrez® • • • • •Titanium • • •
Halar Coated 316L SS •Halar Coated Monel® • • •Teflon®-Coated 316L SS •Gold-Plated 316L SS • • •Bottom Housing Material
Steel • • •304L SS • • •316L SS • • • • •
Hastelloy® B • • • • •Hastelloy® C 22 • • • • •
Hastelloy® C 276 • • • • •Carpenter® 20 • • • •Monel® 400 • • • • •
Inconel® • •Nickel • •PVC 1, 1½, 2
Kynar® 1, 1½, 2Titanium • • • •
Flange Class150 • • • • • •300 • • • • • •600 • • • • •900 • • • • •
1,500 • • • •Instrument Connection Size
¼ • • • �