Automatic Sweep Drop Module for Brunswick Pinsetters - GSX Nexgen box ODD LANE ODD LANE EVEN LANE EVEN LANE SWEEP SOLENOID SWEEP SOLENOID SWEEP SOLENOID SWEEP SOLENOID Brown Brown White White Brown Brown White White P2 P2 P19 P19 BEFORE AFTER P22 P22 P22 P5 P5 Mask - 1st Ball Mask - 1st Ball Mask - 1st Ball The Automatic Sweep Drop Module (ASDM) will automatically drop the sweep when the Pinsetter is turned off as the games are finished. Quick-connect plugs are used to connect the ASDM to the Pinsetter so that if necessary the original cables can be plugged back into each other. This means that the Pinsetter can be returned to its original wiring configuration in seconds. The ASDM is totally low voltage - it is powered from an external power source of 24-26V AC or DC and uses the Pinsetter's own 24VDC Sweep Solenoid output to run the sweep down to the guard position when the machine is turned off. The Sweep Drop function can be turned off at any time using the Rear Switch. Mask - 1st Ball TRANSFORMER TRANSFORMER TRANSFORMER TRANSFORMER ASDM ASDM Rear Switch - turn the Auto Sweep Drop function on or off. Useful for machine and lane maintenance. PINSETTER FRONT PANEL PINSETTER FRONT PANEL PINSETTER FRONT PANEL PINSETTER FRONT PANEL Nexgen box Tap-splice Connector 19 - 26 SWG Plastic Connector 2 way w/crimp pins/sockets Installation Notes: 86 Barry Street Reservoir Victoria 3073 Australia Phone +61 3 9460 2559 Fax +61 3 9460 7071 Page 1 of 5 by Cybernetic Solutions Can be re-joined to by-pass ASDM POWER SUPPLY tenpintec.com tec tenpin
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Automatic Sweep Drop Modulefor Brunswick Pinsetters - GSX
Nexgen box
ODD LANE
ODD LANE
EVEN LANE
EVEN LANE
SWEEPSOLENOID
SWEEPSOLENOID
SWEEPSOLENOID
SWEEPSOLENOID
Brown
Brown
White
White
Brown
Brown
White
White
P2
P2
P19
P19
BEFORE
AFTER
P22
P22
P22P5
P5
Mask - 1st Ball Mask - 1st Ball
Mask - 1st Ball
The Automatic Sweep Drop Module (ASDM) will automatically drop the sweep when the Pinsetter is turned off as the games are finished.
Quick-connect plugs are used to connect the ASDM to the Pinsetter so that if necessary the original cables can be plugged back intoeach other. This means that the Pinsetter can be returned to its original wiring configuration in seconds.
The ASDM is totally low voltage - it is powered from an externalpower source of 24-26V AC or DC and uses the Pinsetter's own 24VDC Sweep Solenoid output to run the sweep down to the guard position when the machine is turned off.
The Sweep Drop function can be turned off at any time usingthe Rear Switch.
Mask - 1st Ball
TRANSFORMER TRANSFORMER
TRANSFORMERTRANSFORMER
ASDM
ASDM Rear Switch - turn the Auto Sweep Drop function on or off. Useful for machine and lane maintenance.
Installation Notes:86 Barry Street Reservoir Victoria 3073 Australia
Phone +61 3 9460 2559 Fax +61 3 9460 7071
Page 1 of 5
by Cybernetic Solutions
Can be re-joinedto by-pass ASDM
POWER SUPPLY
tenpintec.com
tectenpin
Automatic Sweep Drop Modulefor Brunswick Pinsetters - GSX
Installation Notes:86 Barry Street Reservoir Victoria 3073 Australia
Phone +61 3 9460 2559 Fax +61 3 9460 7071
Page 2 of 5
by Cybernetic Solutions
INSTALLATION
1. Turn off power to both Pinsetters of the pair.
2. Mount ASDM module to front panel of Pinsetter using the diagrams and photos as a guide.
3. The 4 cables (2 x 6 way, 1 x 4 way, 1 x 2 way) should already be connected to the ADSM. Run these cables to their approximate place in or on the Nexgen box as shown in the diagrams.
4. Attach Yellow and GREEN wires using BLUE tap-splice connectors to 1st Ball wires - see diagram page 3.
5. Remove the two Sweep Solenoid wires (Brown and White) with their female crimp sockets intact, from P5 and P19 using the supplied tool.
6. Insert Red and Black wires with female crimp sockets in their place.
7. Insert the Brown and White Sweep Solenoid wires (removed in Step 6) into the new 2 way connector (supplied), matching Brown with Blue and White with White as shown in the diagram.
8. Plug the two pairs of connectors into each other. They will only matetogether one way.
* To by-pass the ASDM at any time, simply restore the original Sweep Solenoid circuit by disconnecting the two pairs of plugs and pluggingthe Red/Black from the Nexgen box directly to the Brown/White goingto the Sweep Solenoid.
9. Connect the two 24VDC wires from the Power Supply to the powerterminals inside the ASDM as shown in the diagram on page 4.
10. Mount the Rear Switch module to the rear of the odd numbered Pinsetter as shown in the photos.
11. Check that all cables are secured and will not interfere with access to the machine or with moving machine parts.
12. If you have a LaneMinder with Cutout-2 or Cutout-8 modules fitted, connect 2 way cable to Inputs 7. This will prevent sweep down function if the Pinsetter is turned off by the LanemInder.
13. Turn on Pinsetter. With Rear Switch turned on (LED on) the machine will function as usual during normal play. When the lane is turned off after games are finished, sweep will drop to guard position.
Installation Step by Step - ASDM to Brunswick GSX
tenpintec.com
tectenpin
P2
P5
P19
P22
Brown
White
White
Green
Yellow
Nexgen Box - Left Side Nexgen Box - Right Side
P7
P18
P20 P21
P23
P1
P6
P17
P3 P4
1st BallMask Unit
1st BallMask Unit
to Sweep Solenoidto Sweep Solenoid
Male shellFemale pins
Male shellFemale pins
Female shellMale pins
Female shellMale pins
Male shellFemale pins
Male shellFemale pins
Female shellMale pins
Female shellMale pins
Rear Switch
ASDM circuit board connection details - Page 4
24V AC or DC connection detail - page 4
Machine connections - ASDM to Brunswick Pinsetter - GSX
Automatic Sweep Drop Modulefor Brunswick Pinsetters - GSX
Installation Notes:86 Barry Street Reservoir Victoria 3073 Australia
Phone +61 3 9460 2559 Fax +61 3 9460 7071
Page 3 of 5
by Cybernetic Solutions
tenpintec.com
tectenpin
++
++
++ ++++ ++ Gnd ++ ++++ +++ 3 + 4
Outputs
24-26V AC or DC Power figure 8 cable
L
R
figure 8 cablefrom Laneminder Cutout-2(if fitted)will stop sweep from droppingif Pinsetter is turned offby LaneMinder
Nexgen Box LEFT SIDE
Nexgen Box RIGHT SIDE
Cut cable and fit new 2 way connectorssee page 2 for details
Cut cable and fit new 2 way connectorssee page 2 for details
++
++
++
++
++
++
++
++
56
78
##
##
++
++
++
++
++
++
++
++
12
34
##
##
++ ++++ ++++ ++++ ++1 2 3 4+ + + +
Circuit board connections - ASDM to Brunswick Pinsetter - GSX
Automatic Sweep Drop Modulefor Brunswick Pinsetters - GSX
Installation Notes:86 Barry Street Reservoir Victoria 3073 Australia
Phone +61 3 9460 2559 Fax +61 3 9460 7071
Page 4 of 5
by Cybernetic Solutions
POWER SUPPLY
tenpintec.com
tectenpin
LED Functions - ASDM to Brunswick Pinsetter - GSX
Automatic Sweep Drop Modulefor Brunswick Pinsetters - GSX
Installation Notes:86 Barry Street Reservoir Victoria 3073 Australia
Phone +61 3 9460 2559 Fax +61 3 9460 7071
Page 5 of 5
by Cybernetic Solutions
1
2
3
4
5
6
7
8
Sweep Down function enabled (same as LED on Back-end box). When off, machine will still operate normally.
LaneMinder tripped. Sweep will NOT drop when machinesturn off. Resets when machines are turned back on.
Left Sweep solenoid
Right Sweep solenoid
Left Machine ON
Right Machine ON
Left Sweep time delay
Right Sweep time delay
} Flashes for 1 secondwhen sweep solenoid is activated.
From 1st ball light.
From 1st ball light.
Is lit after machine has been turned off, during the delay before the sweep is dropped.Time delay is adjustable using the “pot”on the board.
Is lit after machine has been turned off, during the delay before the sweep is dropped.Time delay is adjustable using the “pot”on the board.