Whatever Your Need… We’ve Got You Covered! Whatever Your Need… We’ve Got You Covered! Email: [email protected] www.L-3com.com/ESSCO L-3 ESSCO 90 Nemco Way Ayer, MA 01432 Tel: 978.568.5150 Fax: 978.772.7555 L-3 ESSCO Collins Limited Kilkishen, County Clare, Ireland Tel: +353 61 367244 Fax: +353 61 311044 LAND | SEA | AIR L-3 ESSCO and its subsidiary, L-3 ESSCO Collins Limited (ECL), are the world’s premier designers and manufacturers of radomes, reflectors and composite structures. Our two fully equipped operations and manufacturing facilities — one in the U.S. and the other in Europe — enable us to support customer requirements around the globe, manage multiple programs simultaneously and provide delivery in the shortest time possible. Call L-3 ESSCO today to discuss your radome needs. Whatever your application — be it ground-based, shipboard or airborne — we’ve got you covered! AS9100 is an international standard for aerospace quality management systems. It was released in 1999 by the Society of Automotive Engineers and the European Association of Aerospace Industries to improve quality and assure the integrity of aerospace supplies directly impacting product safety and reliability. AS9100 certification is important to organizations that design and manufacture products for the aviation, space and defense industries in order to demonstrate their ability to consistently meet customer, statutory and regulatory requirements. The latest version, AS9100C, incorporates all the requirements of ISO 9001:2008, as well as additional industry requirements relating to quality, safety and risk management. It is currently the most widely adopted quality management standard for the aviation, space and defense industries. NQA CERTIFICATION National Quality Assurance (NQA) is the world’s leading independent certification body for the aviation and aerospace industry. In May 2015, NQA conducted an on-site assessment and Initial Certification Audit of L-3 ESSCO’s 163,210-square-foot operations and manufacturing facility in Ayer, MA. The audit was measured against the provisions of ISO 9001:2008 and AS9100C, and in accordance with the requirements of AS9104/1:2012. Initial certification to AS9100 was granted to L-3 ESSCO on June 1, 2015. Ongoing certification compliance will be maintained through a program of annual surveillance audits and a three-year recertification audit conducted in accordance with AS9100 requirements. Demonstrating our continued commitment to the highest standards of quality and compliance throughout design, manufacture and supply. This document consists of general capabilities information that is not defined as controlled technical data under ITAR Part 120.10 or EAR Part 772. Data, including specifications, contained within this document are summary in nature and subject to change at any time without notice at L-3’s discretion. Call for latest revision. All brand names and product names referenced are trademarks, registered trademarks, or trade names of their respective holders. 9/15 Use of U.S. DoD visual information does not imply or constitute DoD endorsement. L-3 ESSCO is the first rigid ground-based radome supplier in the world to have obtained AS9100 certification. L-3 ESSCO is the first rigid ground-based radome supplier in the world to have obtained AS9100 certification. AS 9100 Registered Aerospace and Defense L-3 ESSCO AS9100-CERTIFIED QUALITY MANAGEMENT SYSTEM