www.edge-core.com.au DATASHEET Data Center Switch AS4610 Series 1GbE Data Center Switch Bare-Metal Hardware Product Overview The AS4610 series is a high-performance Gigabit Ethernet Layer 3 switch family featuring 30 or 54 ports; AS4610-30T and AS4610-54T with 24/48 10/100/1000BASE-T ports, 4 x 10G SFP+ uplink ports and 2 x 20G QSFP+ stacking ports; AS4610-30P and AS4610-54P with 24/48 10/100/1000BASE-T ports, 4 x 10G SFP+ uplink ports and 2 x 20G QSFP+ stacking ports plus 24/48 10/100/1000BASE-T ports fully support IEEE 802.3at and IEEE 802.3af AS4610-54T is ideal for data center top-of-rack switch or IPMI switch, including FAN-less design, redundant hot-swappable AC PSUs and port-to-power airflow. AS4610-30T, AS4610-30P and AS4610-54P are ideal for Campus Networking and AS4610-30P/AS4610-54P can provide up to 30 Watts per port of power to attached devices(eight ports support UPoE up to 60W), such as VoIP phones, wireless access points, surveillance cameras, etc, to fully utilizing existing Cat. 5 cable infrastructure. Key Features and Benefits ■ Cost-effective, bare-metal infrastructure for data center racks. ■ 1 GbE connection to server and storage nodes in rack, with 10 GbE uplinks to spine network. ■ 24/48 x 10/100/1000BASE-T RJ-45 ports. ■ 4 x SFP+ uplink ports, supporting 10 GbE (DAC, 10GBASE-SR/LR/ER/LRM) or 1 GbE (1000BASE-T/SX/LX). ■ Full line-rate L2 or L3 forwarding of 128 Gbps. ■ Support hot/cold aisle with port-to-power and power-to-port airflow SKUs. ■ Energy efficiency: Maximum 99.1 W power consumption. ■ Hot-swappable, load-sharing, redundant AC PSUs ■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible independent SwitchOS software. ■ Compatible with Cumulus®Linux® software from Cumulus Networks™. ■ Compatible with PicOS™ r2.6.2 and later version from Pica8 Inc. For a world always connected…
4
Embed
AS4610 Series 1GbE Data Center Switch Bare-Metal Hardware · 2016-01-19 · DATASHEET Data Center Switch AS4610 Series 1GbE Data Center Switch Bare-Metal Hardware Product Overview
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.edge-core.com.auDATASHEET
Data C
enter Sw
itch
AS4610 Series1GbE Data Center SwitchBare-Metal Hardware
Product OverviewThe AS4610 series is a high-performance Gigabit Ethernet Layer 3 switch family featuring 30 or 54 ports; AS4610-30T and AS4610-54T with 24/48 10/100/1000BASE-T ports, 4 x 10G SFP+ uplink ports and 2 x 20G QSFP+ stacking ports; AS4610-30P and AS4610-54P with 24/48 10/100/1000BASE-T ports, 4 x 10G SFP+ uplink ports and 2 x 20G QSFP+ stacking ports plus 24/48 10/100/1000BASE-T ports fully support IEEE 802.3at and IEEE 802.3af AS4610-54T is ideal for data center top-of-rack switch or IPMI switch, including FAN-less design, redundant hot-swappable AC PSUs and port-to-power airflow. AS4610-30T, AS4610-30P and AS4610-54P are ideal for Campus Networking and AS4610-30P/AS4610-54P can provide up to 30 Watts per port of power to attached devices(eight ports support UPoE up to 60W), such as VoIP phones, wireless access points, surveillance cameras, etc, to fully utilizing existing Cat. 5 cable infrastructure.
Key Features and Benefits
■ Cost-effective, bare-metal infrastructure for data center racks.
■ 1 GbE connection to server and storage nodes in rack, with 10 GbE uplinks to spine network.
■ 24/48 x 10/100/1000BASE-T RJ-45 ports.
■ 4 x SFP+ uplink ports, supporting 10 GbE (DAC, 10GBASE-SR/LR/ER/LRM) or 1 GbE (1000BASE-T/SX/LX).
■ Full line-rate L2 or L3 forwarding of 128 Gbps.
■ Support hot/cold aisle with port-to-power and power-to-port airflow SKUs.
■ Energy efficiency: Maximum 99.1 W power consumption.
■ Hot-swappable, load-sharing, redundant AC PSUs
■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible independent SwitchOS software.
■ Compatible with Cumulus®Linux® software from Cumulus Networks™.
■ Compatible with PicOS™ r2.6.2 and later version from Pica8 Inc.
For a world always connected…
Product Model AS4610-30T AS4610-30P AS4610-54T AS4610-54P
Dimension (W x D x H) cm 44 x 35 x 4.5 44 x 35 x 4.5 44 x 35 x 4.5 44 x 35 x 4.5
Weight 5.16 kg 6.02 kg 5.38 kg 6.36 kg
Power Supply 100-240 VAC, 50-60 Hz O O O O
Max System Power Consumption (Watts) 76.1 W 81.72 W 92.2 W 99.1 W
Environmental Operating Temperature 0ºC to 45ºC 0ºC to 45ºC 0ºC to 45ºC 0ºC to 45ºC
Operating Humidity (non-condensing) 5% to 95% 5% to 95% 5% to 95% 5% to 95%
Environmental Regulation compliance: WEEE O O O O
Environmental Regulation compliance: RoHS O O O O
Certifi cation FCC Class A O O O O
CE O O O O
Safety Compliance: CB O O O O
Safety Compliance: UL O O O O
CCC X X X O
BSMI O O O O
Features
www.edge-core.com.auAS4610 Series Product Specifications
FeaturesAS4610 Series1GbE Data Center SwitchBare-Metal Hardware
Product OverviewThe AS4610 series is a high-performance Gigabit Ethernet Layer 3 switch family featuring 30 or 54 ports; AS4610-30T and AS4610-54T with 24/48 10/100/1000BASE-T ports, 4 x 10G SFP+ uplink ports and 2 x 20G QSFP+ stacking ports; AS4610-30P and AS4610-54P with 24/48 10/100/1000BASE-T ports, 4 x 10G SFP+ uplink ports and 2 x 20G QSFP+ stacking ports plus 24/48 10/100/1000BASE-T ports fully support IEEE 802.3at and IEEE 802.3af AS4610-54T is ideal for data center top-of-rack switch or IPMI switch, including FAN-less design, redundant hot-swappable AC PSUs and port-to-power airflow. AS4610-30T, AS4610-30P and AS4610-54P are ideal for Campus Networking and AS4610-30P/AS4610-54P can provide up to 30 Watts per port of power to attached devices(eight ports support UPoE up to 60W), such as VoIP phones, wireless access points, surveillance cameras, etc, to fully utilizing existing Cat. 5 cable infrastructure.
Key Features and Benefits
■ Cost-effective, bare-metal infrastructure for data center racks.
■ 1 GbE connection to server and storage nodes in rack, with 10 GbE uplinks to spine network.
■ 24/48 x 10/100/1000BASE-T RJ-45 ports.
■ 4 x SFP+ uplink ports, supporting 10 GbE (DAC, 10GBASE-SR/LR/ER/LRM) or 1 GbE (1000BASE-T/SX/LX).
■ Full line-rate L2 or L3 forwarding of 128 Gbps.
■ Support hot/cold aisle with port-to-power and power-to-port airflow SKUs.
■ Energy efficiency: Maximum 99.1 W power consumption.
■ Hot-swappable, load-sharing, redundant AC PSUs
■ Hardware switch pre-loaded with Open Network Install Environment (ONIE) for automated loading of compatible independent SwitchOS software.
■ Compatible with Cumulus®Linux® software from Cumulus Networks™.
■ Compatible with PicOS™ r2.6.2 and later version from Pica8 Inc.
www.edge-core.com.auAS4610 Series Product Specifications
Ports Switch Ports: 24/48 x RJ-45 100/1000BASE-T ports 4 x 10G SFP+ ports supporting 10G or 1G 2 x 20G QSFP+ Stacking Port (requires Switch OS to support Hardware Stacking Feature) Management Ports on front (port) side: 1 x Micro USB serial console 1 x RJ-45 100/1000BASE-T management 1 x USB Type A storage port
Performance Wire Speed Forwarding: L2 and L3 Switching Capacity: 128 Gbps MAC Addresses: up to 96K VLAN IDs: 4K Jumbo Frames (9216 Bytes) L3 Hosts: up to 176K L3 Routes IPv4 12K, IPv6 6K Packet Buffer Size: 4 MB shared buffer pool
Supported Optics and Cables GE RJ-45 Ports: Cat 5/5e/6 up to 100 m SFP+ Ports: 10GBASE-CR DAC; 0.5 m to 7 m 10GBASE-SRL/SR; up to 100/300 m over OM3 MMF 10GBASE-LR; up to 10 km over SMF 1000BASE-SX, 1000BASE-LX, 100/1000BASE-T QSFP Port on Optional Module: 40GBASE-CR4 DAC; 0.5 m to 7 m 40GBASE-SR4; up to 100 m over OM3 MMF, 150 m over OM4 MMF 40GBASE-SR4 to 4x10GBASE-SR; 100 m over OM3, 150 m OM4 40GBASE-LR4; up to 10 km over SMF
Physical and Environmental Dimensions (HxWxD): 4.5 x 44 x 35 cm (1.7 x 17.3 x 16.1”) 1 RU Weight AS4610-30T: 5.16 kg (11.37 lbs) AS4610-30P: 6.02 kg (13.27 lbs) AS4610-54T: 5.38 kg (11.86 lbs) AS4610-54P: 6.36 kg (14.02 lbs) Fans: AS4610-30T / AS4610-54T: Fan-less AS4610-30P / AS4610-54P: 1 fixed fan Operating Temperature: 0°C to 45°C Storage Temperature: -40°C to 70°C Operating Humidity: 5% to 95% non-condensing PSUs: 2 redundant, load-sharing, hot-swappable AC Input Voltage: 90 to 264 VAC at 50-60 Hz. -48 to -72 VDC. Input Current: Max 13A @100/120 VAC, 3 A @200/240 VAC, 10 A @-72 VDC, 12 VDC power input option 12 VDC power input option Typical Power: 122 W, line-rate, 48 x 1 GbE Cat 6, 4 x 10GBASE-SR
Regulatory EMI: CE Mark (EN55022 Class A) FCC Part 15 Class A VCCI Class A CCC GB9254-2008 (AS4610-54P only) BSMI (CNS13438) Environmental: Temperature: IEC 68-2-14 Shock: IEC 68-2-29 Vibration: IEC 68-2-36, IEC 68-2-6 Drop: ISTA 2A RoHS-6 Compliant Safety: UL (CSA 22.2 No 60950-1 & UL 60950-1) CB (IEC/EN60950-1) CCC GB4943-2011 (AS4610-54P only) BSMI (CNS14336) Country of Origin: Taiwan (TAA Compliant)
LEDs GE RJ-45 SFP+ Port LEDs: Link Speed, Link Status, Activity 10G SFP+ Port LEDs: Link Speed, Link Status, Activity Ethernet Management Port LED: Link Status, Activity System LEDs: PRI, PSU1, PSU2, STK1, STK2, FAN, PoE
Software Switch is loaded with Open Network Install Environment (ONIE) software installer Compatible with the following switchOS software Cumulus®Linux® software from Cumulus Networks™ PicOS™ r2.6.2 and later version from Pica8 Inc
Warranty Please check www.edge-core.com for the warranty terms in your country. The warranty provides return-to-factory hardware replacement for a three year period in North America.
For More Information To find out more about Edge-Core Networks products and solutions, visit www.edge-core.com.au
About Edge-Core Networks Edge-Core Networks is in the business of providing innovative network solutions. In the service provider network, in the data center or in the cloud, Edge-Core Networks delivers the software and systems that transform the way the world connects. Edge-Core Networks serves customers and partners worldwide. Additional information can be found at www.edge-core.com.au.
Edge-Core Networks is a subsidiary of Accton Technology Corporation, the leading network ODM company. The Edge-Core data center switches are developed and manufactured by Accton.
Regulatory EMI: CE Mark (EN55022 Class A) FCC Part 15 Class A VCCI Class A CCC GB9254-2008 (AS4610-54P only) BSMI (CNS13438) Environmental: Temperature: IEC 68-2-14 Shock: IEC 68-2-29 Vibration: IEC 68-2-36, IEC 68-2-6 Drop: ISTA 2A RoHS-6 Compliant Safety: UL (CSA 22.2 No 60950-1 & UL 60950-1) CB (IEC/EN60950-1) CCC GB4943-2011 (AS4610-54P only) BSMI (CNS14336) Country of Origin: Taiwan (TAA Compliant)
LEDs GE RJ-45 SFP+ Port LEDs: Link Speed, Link Status, Activity 10G SFP+ Port LEDs: Link Speed, Link Status, Activity Ethernet Management Port LED: Link Status, Activity System LEDs: PRI, PSU1, PSU2, STK1, STK2, FAN, PoE
Software Switch is loaded with Open Network Install Environment (ONIE) software installer Compatible with the following switchOS software Cumulus®Linux® software from Cumulus Networks™ PicOS™ r2.6.2 and later version from Pica8 Inc
Warranty Please check www.edge-core.com for the warranty terms in your country. The warranty provides return-to-factory hardware replacement for a three year period in North America.
For More Information To find out more about Edge-Core Networks products and solutions, visit www.edge-core.com
About Edge-Core Networks Edge-Core Networks is in the business of providing innovative network solutions. In the service provider network, in the data center or in the cloud, Edge-Core Networks delivers the software and systems that transform the way the world connects. Edge-Core Networks serves customers and partners worldwide. Additional information can be found at www.edge-core.com.
Edge-Core Networks is a subsidiary of Accton Technology Corporation, the leading network ODM company. The Edge-Core data center switches are developed and manufactured by Accton.