Electronic Supporting Information A general in-situ etching and synchronous heteroatom doping strategy to boost the capacitive performance of commercial carbon fibre cloth Tian Ouyang a , Kui Cheng a, b** , Fan Yang c , Jietao Jiang a , Jun Yan a , Kai Zhu a , Ke Ye a , Guiling Wang a , Limin Zhou b , Dianxue Cao a a. Key Laboratory of Superlight Material and Surface Technology of Ministry of Education, College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin, China b. Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR, China Corresponding author. E-mail address: [email protected](Kui Cheng), [email protected](Dianxue Cao). 1
18
Embed
ars.els-cdn.com · Web viewDepartment of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR, China College of Science, Northeast Agricultural
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Electronic Supporting Information
A general in-situ etching and synchronous heteroatom
doping strategy to boost the capacitive performance of
commercial carbon fibre clothTian Ouyanga, Kui Chenga, b**, Fan Yangc, Jietao Jianga, Jun Yana, Kai Zhua, Ke Yea,
Guiling Wanga, Limin Zhoub, Dianxue Caoa
a. Key Laboratory of Superlight Material and Surface Technology of Ministry of
Education, College of Material Science and Chemical Engineering, Harbin
Engineering University, Harbin, China
b. Department of Mechanical Engineering, The Hong Kong Polytechnic University,
Hung Hom, Kowloon, Hong Kong SAR, China
c. College of Science, Northeast Agricultural University, Harbin 150030, China
Figure S1. Digital photo of the fresh CFC soaking-recrystallization process (a) and Corresponding author. E-mail address: [email protected] (Kui Cheng), [email protected] (Dianxue Cao).
1. S. Gao, L. Zhu, L. Liu, A. Gao, F. Liao and M. Shao, Electrochimica Acta, 2016, 191, 908-915.
2. W. Wang, W. Liu, Y. Zeng, Y. Han, M. Yu, X. Lu and Y. Tong, Adv. Mater., 2015, 27, 3572-3578.
3. G. Wang, H. Wang, X. Lu, Y. Ling, M. Yu, T. Zhai, Y. Tong and Y. Li, Adv. Mater., 2014, 26, 2676-2682.
4. P. Yang, X. Xiao, Y. Li, Y. Ding, P. Qiang, X. Tan, W. Mai, Z. Lin, W. Wu, T. Li, H. Jin, P. Liu, J. Zhou, C. P. Wong and Z. L. Wang, ACS Nano, 2013, 7, 2617-2626.
5. G. Nagaraju, Y. H. Ko, S. M. Cha, S. H. Im and J. S. Yu, Nano Research, 2016, 9, 1507-1522.6. X. Shang, J.-Q. Chi, S.-S. Lu, J.-X. Gou, B. Dong, X. Li, Y.-R. Liu, K.-L. Yan, Y.-M. Chai and
C.-G. Liu, Applied Surface Science, 2017, 392, 708-714.7. N. Yu, H. Yin, W. Zhang, Y. Liu, Z. Tang and M.-Q. Zhu, Advanced Energy Materials, 2016,
6, 1501458-n/a.8. X. Jiang, Y. Cao, P. Li, J. Wei, K. Wang, D. Wu and H. Zhu, Materials Letters, 2015, 140, 43-
47.
12
9. Z. Ye, T. Li, G. Ma, X. Peng and J. Zhao, Journal of Power Sources, 2017, 351, 51-57.10. Y. Zhao and P. Jiang, Colloids and Surfaces A: Physicochemical and Engineering Aspects,