ARM Touch 60 Handloom The ‘ARM Touch 60’ loom brings together all the tradional handloom weaving theory & pracce with a new generaon of electronic touch screen control. Compact and smart, weaving praccality is at the heart of this machine. Available in either floor standing or table-top versions, the ARM Touch 60 is a perfect soluon for weavers, designers and educaon centres specialising in woven structured texles. Easy loom threading is enhanced by a fully removable baen and breast/back beams. All loom rollers come complete with full width canvas horses and stainless steel dweets for aaching warp threads. With 24 shaſts, each loaded with 150 heddles, warps can have a total capacity of 3600 ends. A hi-level storage tray provides convenient and safe storage of tools and equipment within easy reach from front or back of the machine. Exisng Arm Patronic users will immediately feel at home with the form and layout of the new ARM Touch 60 but that is where the similarity ends …….. The new ARM Touch 60 comes with a centrally mounted touch control screen that displays the weave structure to the operator on ‘virtual’ point paper. With a highly intuive menu layout, the current weſt inseron posion is highlighted on the screen, with a viewable range of 4 lines behind and 11 in front. As weaving progresses, the visual display indexes upwards with each warp liſt. Whilst weave plans can be run either forwards or backwards for design effect, the weaver can easily reverse the programme at any me if an error is made. The machine memory comes complete with 42 pre-programmed standard weaves and these can be used in any combinaon on any or all of 24 shaſts, if desired. With plenty of digital storage space, the designers work can easily be saved & recalled, to/from an external computer or USB drive AND there’s even a convenient phone charging socket built in.