บริษัท อีทีที จำกัด ETT CO., LTD. Company reserves the right to change the detail and price of any product without any prior notice. Tel : +66 (0) 2-7121120 Fax : +66 (0) 2-3917216 e-mail : [email protected] www.etteam.com ARM Cortex-M3 / ARM7 Product Catalog 2012 Electronics Technology Team 27 www.etteam.com (P-ET-A-00453) ET-NXP ARM KIT LPC1769 (P-ET-A-00409) ET-NXP ARM KIT LPC1768 (P-ET-A-00454) ET-NXP ARM KIT LPC1769 & TFT LCD (P-ET-A-00410) ET-NXP ARM KIT LPC1768 & TFT LCD 2 3 new This is the ultimate ARM Board from NXP Company that includes many devices such as ETHERNET LAN, USB 2.0, USB HOST, SD CARD, RS232, TFT LCD, 5-DIRECTIONAL JOY SWITCH and etc. There are 4 versions with 2 MCU as follows; 1. ET-NXP ARM KIT LPC1769 2. ET-NXP ARM KIT LPC1768 3. ET-NXP ARM KIT LPC1769 & TFT LCD 4. ET-NXP ARM KIT LPC1768 & TFT LCD All of 4 versions have the same board and standard devices as follows; • IN-SYSTEM PROGRAMING (ISP) and IN-APPLICATION PROGRAM (IAP) through ON-CHIP BOOT-LOADER through PORT RS232, it is unnecessary to purchase any COPY PROGRAMMER. • 20PIN PORT JTAG ARM Standard for REAL TIME DEBUGGER • ETHERNET LAN 10/100MB by using Connector 1-CH RJ45 • SD CARD Interface(MICRO SD) • PORT USB 2.0 FULL SPEED by using Connector TYPE B ON BOARD • 2-CH 4PIN ETT PORT RS232 • 5-DIRECTIONAL JOY SWITCH • Adjustable VR 10K as R for testing Circuit A TO D • LED to display status of 8-OUTPUT, 1-TACT SW, 1-MINI SPEAKER • USB HOST TYPE A • RTC(internal MCU) with X™TAL 32.768KHz and BATTERY BACKUP • AVAILABLE 22BIT GPIO for various application such as D/A, I 2 C, I 2 S, CAN and INPUT/OUTPUT (it can interface with I/O 5V) • 10PIN HEADER P2(0-7) for GPIO or FULL-DUPLEX SERIAL UART • 3PIN HEADER P0(26) for GPIO or D/A • 3PIN HEADER P4(29) for GPIO • 4PIN HEADER P0(19-20) for GPIO or I 2 C BUS • 4PIN HEADER P0(0-1) and P0(4-5) for GPIO or CAN 1 and CAN2 BUS • 5PIN HEADER P0(23-25) and P2(11-13) for GPIO and I 2 S-RX and I 2 S-TX • 5VDC/850mA POWER SUPPLY for board (it is compatible with šET-SWITCHING ADAPTER 5V 1.2A TYPE B› (A-A-A-00079) *170.-); it uses 2PIN Connector or it uses POWER SUPPLY from USB CONNECTOR TYPE B • PCB SIZE: 15.3 x 9 cm. • All 4 board versions consist ofˆ 1. Board 2. CD-ROM User™s Manual and Example Programs 3. Cable DOWNLOAD ET-RS232 DB 9 PIN • MCU ARM CORTEX M3 No.LPC1769 that is 32BIT and 100PIN (TQFP) with 512KB FLASH MEMORY, 64KB RAM, A TO D 12 BIT, D TO A 10 BIT and etc. • X™ TAL 12.00MHz for Phase-Locked-Loop and it can run at the maximum frequency of 120MHz • Part of standard devices on board • (Can purchase and install šBoard ET-TFT240320TP-3.2 REV.B› into this board; in this case, it installs more CONNECTOR 2x20 and 1x20) ET-NXP ARM KIT LPC1769 consists of ˆ • ET-NXP ARM KIT LPC1769 • TFT COLOR LCD with TOUCH SCREEN 240x320 PIXEL, 32" wide Screen, and 65536 Colored Resolution • CHIP TOUCH SCREEN CONTROLLER No.ADS7846 (ON BOARD) ET-NXP ARM KIT LPC1769 & TFT LCD consists of ˆ • MCU ARM CORTEX M3 No.LPC1768 that is 32BIT and 100PIN (TQFP) with 512KB FLASH MEMORY, 64KB RAM, A TO D 12 BIT, D TO A 10 BIT and etc • X™TAL 12.00MHz for Phase-Locked-Loop and it can run at the maximum frequency of 100MHz • Part of standard devices on board • (Can purchase and install š Board ET-TFT240320TP-3.2 REV.B › into this board; in this case, it installs more CONNECTOR 2x20 and 1x20) ET-NXP ARM KIT LPC1768 consists of ˆ • ET-NXP ARM KIT LPC1768 • TFT COLOR LCD with TOUCH SCREEN 240x 320PIXEL, 32" wide Screen, and 65536 Colored Resolution • CHIP TOUCH SCREEN CONTROLLER No.ADS7846 (ON BOARD) ET-NXP ARM KIT LPC1768 & TFT LCD consists of ˆ new