This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ARK-1382 seriesARK-1382 series
Ultra Compact, Fan-less and Ultra Compact, Fan-less and Powerful embedded systemPowerful embedded system
Main board•SOM-4780FL-S0A1E• Intel Celeron M ULV 423@ 1.06GHz •SOM-4780FL-S2A1E•Intel Core Duo U2500 @1.2GHz•Intel 945GMI/O ports
Front IOFront IO • 1 x GigaLAN RJ45 ( support WOL, boot from LAN)• 4 x USB 2.0 • 2 x RS-232 ( RS-422/485 by jumper) • 1 x External CF socket • 2 x Thermal LED, 1 x Power/ CF• 1 x power on/off Rear IO Rear IO • 2 x DVI-I (VGA by cable) • 2 x Line out ( Left and Right) 2.2W• 1 x eSATA/ USB• 1 x power input • 1 x WLAN antenna ( for ARK-1382W)
Storage•1*Compact Flash Socket•1* eSATA ( do not support PnP, PnP function is by project requirement)
Display•2 x DVI-I, (VGA by cable) •DVI + DVI _ dual display•DVI + VGA_ dual display•VGA + VGA_ clone mode
•To support dual VGA independent display, please apply T-P/N and order below parts:
Using the DVI-I to VGA connector (p/n: 1700004713) in package
MiniPCI Z9 VGA card and change rear I/O plate to support 1 x DVI-I and 1 x VGA
ARK-1382 : Three display solution (1) ARK-1382 : Three display solution (1)
•To support dual VGA and one DVI at the same time, please order
1700004713 : DVI-I to DVI + VGA cable x 1 and using the DVI-I to VGA connector in package (1654000446), then ARK-1382 support dual VGA clone mode and one DVI display
ARK-1382 : Three display solution (cont.) ARK-1382 : Three display solution (cont.)
•To support triple independent display, please apply T-P/N and order below parts:
1700004713 : DVI-I to DVI + VGA cable x 1
MiniPCI Z9 VGA card and change rear I/O plate to support 1 x DVI-I and 1 x VGA
LED Over Heat Alarm LED Over Heat Alarm
Measure the internal temperature
Internal temp: <90, LED is blue light
Internal temp: >90, LED is orange light
• Advantech QA testing profile is to make sure system is stable under 60C environment temperature, chamber air flow rate: 0.7m/s; To reflect customer’s installation site sometimes will be non air flow condition, over heat LED is to alarm customer that environment temp is too high, suggest to enhance the air flow rate.
• Internal temperature 75C; the main components are within spec;
ARK-1382 Ordering Information ARK-1382 Ordering Information
P/N CPU CF Memory OS DVI-I
VGA
USB 2.0
RS-232/422/485
Line-out
E
SATA
WLAN
ARK-1382-S0A1E
Intel Celeron M
ULV 1.06GHz
-- -- -- 2 Yes 5 2 Left & Right
1 --
ARK-1382W-S0A1E
Intel Celeron M
ULV 1.06GHz
1
GB
512
MB
XPe
2 Yes 5 2 Left & Right
1 802.11b/g
ARK-1382-S2A1E
Intel Core Duo
ULV 1.2GHz
-- -- -- 2 Yes 5 2 Left & Right
1 --
** ARK-1382 Core duo 1.2GHz solution will phase in around the end of August
ARK-1382 Standard Packing List ARK-1382 Standard Packing List
ARK-1382-S0A1E/S2A1E1. 1 x 1700001394 : Wire plug lock 2P 4.5cm with DC Jack
2. 1 x 1654000446 : DVI to VGA con
3. 1 x CD Driver
ARK-1382 Standard Packing List (with WLAN)ARK-1382 Standard Packing List (with WLAN)
ARK-1382W-S0A1E/S2A1E1. 1 x 1700001394 : Wire plug lock 2P 4.5cm with DC Jack
2. 1 x 1654000446 : DVI to VGA con
3. 1 x CD Driver
4. 1 x 1750000318: WLAN antenna
5. 1 x 9680005627: 1 x 802.11b/g miniPCI WLAN card
(848.90MB) 2070003783 _ARK-1382 XPE V3.01ENG, French, German, It
aly, Spanis – It is the same installation process; use Ghost 8.3 to restore it t
o CF. When boot complete, it is ENG UI(default), you can go to control panel “Region” to select other UI, then restart. It will become other UI, but size will be big.
Q&A: Q&A:
2. Modify logo from Advantech to customer brand? Or non brand?
Modify as customer brand logo: MOQ=50pcs; please provide JPG/DXF file mark with size, color; After receiving file, we will confirm drawing with 3 days.
Remove Advantech logo, no MOQ, please apply T-P/N and change the chassis P/N to 1960012213T020.
3. Support dual independent VGA display? Yes, we have outsourcing miniPCI VGA card which adopt XGI Z9 IC; You can use T-P/N to get ARK-1382 w/ miniPCI VGA card and IO panel change to 1 x DVI-I (VGA model by package: 1654000446) and 1 x VGA
Q&A: (cont.)Q&A: (cont.)
4. Could we provide remote on/off power bottom to replace the on/off switch?
Yes, modify the power connector as phone jack, MOQ= 50pcs and w/o NRE
5. Wide screen resolution up to? 1388 x 768 ; 1920 x 1080 (TBD)
6. Why the temperature is high on the surface? ARK-1000 use the whole alumni chassis as heatsink, the boards
contact with the chassis directly to enhance dissipate heat; All the main components are within spec, please refer to the thermal condition data in next page. (ARK-1382W-S0A1E)
Q&A: (cont.)Q&A: (cont.)
Q&A: (cont.)Q&A: (cont.)
[China] ARK-1382W version, we do not provide CCC_SRRC certification; If China require for WLAN version, please order ARK-1382-S0A1E and WLAN module/cable together, CTOS installation locally.
[eSATA] There is no Plug and Play function for eSATA, by project requirement; (BIOS need to modify and check the customer’s device can be controlled by AHCI)
[Thermal Alarm] under the non air flow condition, when internal temp is 75C, the reference environment temperature is around 45C. (It depends on the system is full loading or not and other issues, so please still depends on the internal temp: LED light)
[COM port] Default setting is RS-232, if need to use RS-422/485, need to adjust by jumper.
[DOS] under DOS, DVI only support x 1 the red mark is the disable one
Product need to notice pointProduct need to notice point
Thank you Appendix
ARK-1382 Dimension ARK-1382 Dimension Dimension: 189 x 41 x 130.6mm (7.44” x 1.61” x