PSG9 ARCHITEC ARCHITEC ARCHITEC ARCHITEC ARCHITEC TUR TUR TUR TUR TUR AL DOWNLIGHTING AL DOWNLIGHTING AL DOWNLIGHTING AL DOWNLIGHTING AL DOWNLIGHTING GO GO GO GO GO THA THA THA THA THA M M M 202 www.gothamlighting.com Architectural Downlighting The Gotham Lighting Corporation was founded in 1938 in New York City. Gotham’s founder, Harry Gerstel, understood that modernist architecture called for a new approach to interior lighting, and he was in touch with advancements in electric light sources that were on the horizon. From the beginning, Gotham concentrated on developing luminaires that would enhance the appearance of modern spaces without calling attention to themselves. The company’s focus on architectural integration, optical performance, reliability and innovative manufacturing processes resulted in Gotham quickly becoming one of the most respected names in architectural lighting. Today, Gotham continues to embrace the challenges of downlighting product leadership. Bound by our time-honored design principles of optical performance and mechanical quality, we continue to innovate product concepts that optimize new source technologies and expand aesthetic choices for lighting professionals.
70
Embed
Architectural Downlighting The Gotham Lighting Corporation ... · Architectural Downlighting The Gotham Lighting Corporation was founded in 1938 in New York City. Gotham’s founder,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
PSG9
ARC
HIT
ECA
RCH
ITEC
ARC
HIT
ECA
RCH
ITEC
ARC
HIT
ECTU
RTU
RTU
RTU
RTU
R AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
202 www.gothamlighting.com
Architectural Downlighting The Gotham Lighting Corporation was
founded in 1938 in New York City.
Gotham’s founder, Harry Gerstel,
understood that modernist
architecture called for a new approach
to interior lighting, and he was in touch
with advancements in electric light
sources that were on the horizon.
From the beginning, Gotham
concentrated on developing luminaires
that would enhance the appearance of
modern spaces without calling
attention to themselves. The company’s
focus on architectural integration,
optical performance, reliability and
innovative manufacturing processes
resulted in Gotham quickly becoming
one of the most respected names in
architectural lighting.
Today, Gotham continues to embrace
the challenges of downlighting product
leadership. Bound by our time-honored
design principles of optical
performance and mechanical quality,
we continue to innovate product
concepts that optimize new source
technologies and expand aesthetic
choices for lighting professionals.
PSG9
ARCH
ITECA
RCHITEC
ARCH
ITECA
RCHITEC
ARCH
ITECTUR
TUR
TUR
TUR
TURA
L DO
WN
LIGH
TING
AL D
OW
NLIG
HTIN
GA
L DO
WN
LIGH
TING
AL D
OW
NLIG
HTIN
GA
L DO
WN
LIGH
TING
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
203www.gothamlighting.com
PSG9
ARC
HIT
ECA
RCH
ITEC
ARC
HIT
ECA
RCH
ITEC
ARC
HIT
ECTU
RTU
RTU
RTU
RTU
R AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
204 www.gothamlighting.com
New Product: Elevations™ – Highly
configurable, high performance
pendant downlighting. The Elevations™
Series blends elegance and superior
downlighting performance into today’s
ultimate architectural pendant.
For more information about Elevations™
luminaires, see pages 247-253.
PSG9
ARCH
ITECA
RCHITEC
ARCH
ITECA
RCHITEC
ARCH
ITECTUR
TUR
TUR
TUR
TURA
L DO
WN
LIGH
TING
AL D
OW
NLIG
HTIN
GA
L DO
WN
LIGH
TING
AL D
OW
NLIG
HTIN
GA
L DO
WN
LIGH
TING
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
205www.gothamlighting.com
New Product: GQ/GQT Ellipsoidal –
Advanced engineering within a hybrid
ellipsoidal optical system delivers
maximum illuminance from a quiet 6-
inch aperture.
For more information about GQ and GQT
Ellipsoidal products, see pages 236-237.
PSG9
ARC
HIT
ECA
RCH
ITEC
ARC
HIT
ECA
RCH
ITEC
ARC
HIT
ECTU
RTU
RTU
RTU
RTU
R AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
AL
DO
WN
LIG
HTI
NG
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
206 www.gothamlighting.com
New Product: ICE™ Color Series –
Luminous cross baffles with an edge. The
ICE™ Color Series lets you draw attention
to key areas or featured items in a space,
and gives you another tool to augment
your interior design palette. Choose ICE™
Color baffles in flush or round
configurations in four vibrant edge-glow
colors.
For more information about ICE™ Color
baffles, see page 222.
Candéo® – High performance recessed
downlighting that challenges tradition
to make its own individual design
statement. Candéo® luminaires can be
configured to present a wide variety of
visual effects. The Candéo® Series is
unique recessed downlighting designed
to be seen.
For more information about Candéo®
luminaires, see pages 220-221.
PSG9
ARCH
ITECA
RCHITEC
ARCH
ITECA
RCHITEC
ARCH
ITECTUR
TUR
TUR
TUR
TURA
L DO
WN
LIGH
TING
AL D
OW
NLIG
HTIN
GA
L DO
WN
LIGH
TING
AL D
OW
NLIG
HTIN
GA
L DO
WN
LIGH
TING
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
207www.gothamlighting.com
CCCCCONTENTONTENTONTENTONTENTONTENTSSSSS
DownlightingDownlightingDownlightingDownlightingDownlightingCompact Fluorescent 208HID 224Incandescent 232Low Voltage 242, 246
AccentAccentAccentAccentAccentCompact Fluorescent 216HID 228Incandescent 240Low Voltage 243
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Aperture
41
51
68
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
209
CC CCCOM
PO
MP
OM
PO
MP
OM
PAA AAACC CCCT FLT FLT FLT FLT FLU
ORESCEN
T DO
WN
LIGH
TING
UO
RESCENT D
OW
NLIG
HTIN
GU
ORESCEN
T DO
WN
LIGH
TING
UO
RESCENT D
OW
NLIG
HTIN
GU
ORESCEN
T DO
WN
LIGH
TING
www.gothamlighting.com, keyword: AFVW
Series
AFVW
Wattage/lamp
13DTT18DTT26DTT18TRT26TRT32TRT42TRT
Trim color
AR ClearPR Pewter
UBR UmberWTR Wheat
WR White painted2
Voltage
120277347
MVOLT3
NOTES:
1 Available in 13DTT, 18TRT, 26TRT and32TRT lamp only.
2 Not available with LD finish.
3 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Ordering Information Example: AFVW 26TRT 6AR MVOLT
Intended Use
For general downlight wallwash applications that demand high efficiency, uniform verticalillumination and low aperture brightness.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. PatentedVertisys® - Bounding Ray™ OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image, lamp image thatreflects smoothly from the top ofthe reflector to the aperture, andoptimal fixture performance and
efficiency. Patented hybrid wallwashkicker provides uniform verticalillumination with light high on thewall close to the ceiling and noroomside “back-flash.”
Class P, thermally-protected, highpower factor ballast mounted to thejunction box.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yoke andflat spring utilized to retain opticalsystem. Expandable, self-locking
mounting bars provide horizontaland vertical adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
210
CCCC C OM
PO
MP
OM
PO
MP
OM
P AAAA ACCCC C
T FL
T FL
T FL
T FL
T FL
UO
RESC
ENT
DO
WN
LIG
HTI
NG
UO
RESC
ENT
DO
WN
LIG
HTI
NG
UO
RESC
ENT
DO
WN
LIG
HTI
NG
UO
RESC
ENT
DO
WN
LIG
HTI
NG
UO
RESC
ENT
DO
WN
LIG
HTI
NG
Intended Use
For general downlight applications that demand superior brightness control in shallow plenum areas.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. PatentedBounding RayTM Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from the topof the reflector to bottom, andoptimal fixture performance and
Ordering Information Example: AF 1/32TRT 8AR MVOLT
NOTES:
1 Available in 8” and 10” aperture only.2 Available in 10” aperture only.
3 Available in 8” aperture 1-lamp, or 10”aperture 1 or 2-lamp only, Sylvania orPhilips.
4 Not available with LD finish.5 Multi-volt electronic ballast capable of op-
erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
efficiency. Hinged lampdoor reducesstray light in the plenum.
Electrical SystemHorizontally-mounted, four-pin,positive-latch thermoplasticsocket(s). Socket housing ventilatedfor convective cooling. Class P,thermally-protected, high powerfactor electronic ballast(s) mounted
to the junction box.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yokeutilized to retain optical system.Expandable, self-locking mountingbars provide horizontal and verticaladjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Open ReflectorOpen ReflectorOpen ReflectorOpen ReflectorOpen Reflector
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
1 Available in 10” aperture only.2 Not available with LD finish.
3 Available in 6” and 8” aperture only.
4 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Intended Use
For general downlight applications that demand superior brightness control in shallow plenum areas.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. PatentedBounding RayTM Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from top ofreflector to bottom.
Ordering Information Example: AF 2/26DTT 6AR MVOLT
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yokeutilized to retain optical system.Expandable, self-locking mountingbars provide horizontal and verticaladjustment.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
1 Not available with LD finish.2 Multi-volt electronic ballast capable of op-
erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. PatentedBounding RayTM Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from top ofreflector to bottom. Patented hybridwallwash kicker provides uniform
Ordering Information Example: AFW 2/26DTT 6AR MVOLT
Intended Use
For general downlight wallwash applications that demand superior brightness control and uniformvertical illumination in shallow plenum areas.
vertical illumination with light highon the wall close to the ceiling andno roomside “back-flash.”
Electrical SystemHorizontally-mounted, positive-latch, thermoplastic socket(s).Socket housing ventilated forconvective cooling. Class P,thermally-protected, high power
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yokeutilized to retain optical system.Expandable, self-locking mountingbars provide horizontal and vertical
adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
For general downlight applications that demand superior brightness control in shallow plenum areas.Cross baffle reflector provides additional shielding.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector with crossbaffle that offers optical cut-offwith a clean aperture appearance.Patented Bounding RayTM OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image, and smooth transitionfrom the top of the reflector to
to the junction box.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yokeutilized to retain optical system.Expandable, self-locking mountingbars provide horizontal and verticaladjustment.
Ordering Information Example: AF 1/32TRT 8CB MVOLT
NOTES:
1 Available in 8” and 10” aperture only.2 Available in 10” aperture only.
3 Available in 8” aperture 1-lamp, or 10”aperture 1 or 2-lamp only, Sylvania orPhilips.
4 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
1 Not recommended for use with AFZW.2 Not available with LD finish.
3 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Intended Use
For general downlight and wallwash applications that demand superior brightness control in shallowplenum areas. Cross baffle reflector provides additional shielding.
Downlight Optical SystemSpecular upper reflector. Semi-specular or matte-diffuse reflectorwith cross baffle. Optical systemoptimally balances brightnesscontrol and high efficiency. Lamp isvisible before reflected lamp image.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Series
AFZAFZW
Wattage/lamp
2/13DTT2/18DTT2/26DTT
Aperture/trim color
84A Clear84P Pewter
84UB Umber84WT Wheat
84W White painted1,2
Finish
(blank) Semi-specularLD Matte-diffuse
Voltage
120277347
MVOLT3
Options/accessories
See pages 266-271.
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
216
Intended Use
For downlight wallwash applications requiring a uniform wallwash distribution.
Ordering Information Example: DLWF 1/32TRT 6AR MVOLT
NOTES:
1 Requires four-pin lamp, ships as a TRTfixture.
2 Not available with LD finish.
3 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse compound contourfinishing trim in combination withkeyed, proprietary Gotham® spreadlens delivers a uniform distributionof light to the wall. Enclosed lampcompartment reduces stray light inthe plenum.
Electrical SystemHorizontally-mounted, four-pin,positive-latch thermoplastic socket.Class P, thermally-protected, highpower factor electronic ballastmounted to the junction box.
Mounting16-gauge galvanized steel
mounting/plaster frame with thru-wire junction box will accommodateup to 1-1/2" thick ceiling. Formedhousing with matte black finish.Expandable, self-locking mountingbars provide horizontal and verticaladjustment. Secondary housingadjustment system for preciseceiling-to-flange adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
DoorDie-cast aluminum door frame withgasketed flange. Regressed whitedoor (RW), stepped black baffle(SB), stepped white baffle (SW) orflush white door (FW) available.White-painted flange.
factor ballast(s).
Mounting16-gauge galvanized steel thru-wirejunction box with bottom-hingedaccess covers and spring latches.Telescoping mounting bracket withintegral nailer tabs. Expandablemounting bars provide horizontaland vertical adjustment.
Intended Use
Provides uniform general illumination for institutional, office, commercial and retail applications.
Ordering Information Example: LAF 2/26DTT 11RW T73 MVOLT
11" LAF 12" LAF
NOTES:
1 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
For downlight applications such as offices, corridors, lobbies, retail and reception areas requiringenclosed optics, high efficiency and low aperture brightness.
Optical SystemWhite-painted upper reflector.
DoorRegressed white door (RW) orstepped black baffle (SB) areavailable. Door is retained by twoself-aligning, torsion support springs.
Ordering Information Example: LGFV 26TRT 8RW T73 MVOLT
locking mounting bars providehorizontal and vertical adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and wet locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Candéo® Performance downlighting with an expressive luminance
Open ReflectorOpen ReflectorOpen ReflectorOpen ReflectorOpen ReflectorD
ECD
ECD
ECD
ECD
ECO
RO
RO
RO
RO
R AAAA ATI
VE D
OW
NLI
GH
TIN
G C
TIVE
DO
WN
LIG
HTI
NG
CTI
VE D
OW
NLI
GH
TIN
G C
TIVE
DO
WN
LIG
HTI
NG
CTI
VE D
OW
NLI
GH
TIN
G C
AN
DÉO
®A
ND
ÉO®
AN
DÉO
®A
ND
ÉO®
AN
DÉO
®
Phot
o by M
ichel
le Li
tvin
/ HOK
Phot
ogra
phy,
St Lo
uis,
MO
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
221www.gothamlighting.com, keyword: PDGF
Optical SystemThree-part optical system interactsto create the effect of a clearspecular aperture floating within apool of diffused light (U.S. patentpending). Self-flanged white paintedouter cone. Field adjustable to threesettings, the inner reflector ispainted white on the outer surfacewith semi-specular or matte-diffuseinner surface. Patented Bounding
positive-latch thermoplasticsocket(s). Socket housing ventilatedfor convective cooling. Class P,thermally-protected, high powerfactor electronic ballast(s) mountedto the junction box.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yoke
Intended Use
Decorative luminaire designed to accentuate the space, adding visual interest.
Ordering Information Example: PDGF 1/32TRT 8AR GRN MVOLT
NOTES:
1 Available in 10AR only.2 Available in 10AR 1- or 2-lamp or 8AR 1-
lamp only, Sylvania or Philips.
3 Multi-volt electronic ballast capable ofoperating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
ICE™ Color available in red, blue,amber or white acrylic cross bafflejacketed with aluminum (U.S.Patent No. 6,273,592) provides avibrant edge-glow appearance.Available in flush or round bafflestyles.
for convective cooling. Class P,thermally-protected, high powerfactor electronic ballast(s) mountedto the junction box.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yokeutilized to retain optical system.Expandable, self-locking mountingbars provide horizontal and vertical
adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Optical Principle design (U.S. PatentNo. 5,800,050) provides lamp beforelamp image, and smooth transitionfrom top of reflector to bottom.Clear acrylic turbo baffle has surfacethat provides a decorative edge-
factor electronic ballast(s) mountedto the junction box.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yokeutilized to retain optical system.Expandable, self-locking mounting
Intended Use
High-performance decorative luminaire designed to add visual interest or intrigue.
Ordering Information Example: PDTF 1/32TRT 8AR MVOLT
glow appearance. Hinged lamp doorreduces stray light in the plenum.
Electrical SystemHorizontally-mounted four-pin,positive-latch thermoplasticsocket(s). Socket housing ventilatedfor convective cooling. Class P,thermally-protected, high power
bars provide horizontal and verticaladjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
224 www.gothamlighting.com, keyword: AH
Intended Use
For general downlight applications such as offices, corridors, lobbies, airports, retail locations andreception areas that demand high efficiency and low aperture brightness.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. PatentedBounding Ray™ Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from top ofreflector to bottom.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Expandable, self-locking mounting bars providehorizontal and vertical adjustment.
Ordering Information Example: AH 100M 6AR 120
NOTES:
1 Recommended for use with coatedlamps. Consult specification sheets foradditional lamp types.
2 Medium-base socket provided for usewith open-rated lamps. For enclosed-rated lamps, include lens from lens typefield.
3 Not available in 347V.
4 Required safety glass provided.5 Must use BT28 lamp.
6 Refer to chart for maximum wattageavailability.
7 Not available with LD finish.8 Available in 6” and 8” aperture only.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
225
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector with semi-specular wallwash kicker. PatentedBounding Ray™ Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from top ofreflector to bottom. Patented hybridwallwash kicker provides uniform
socket with nickel-plated screw shell.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yoke andflat spring utilized to retain opticalsystem. Expandable, self-lockingmounting bars provide horizontaland vertical adjustment.
Ordering Information Example: AHW 100M 6AR 120
Intended Use
For general downlight wallwash applications such as offices, corridors, lobbies, airports, retaillocations and reception areas that demand high efficiency, uniform vertical illumination and lowaperture brightness.
NOTES:
1 Recommended for use with coatedlamps. Consult specification sheets foradditional lamp types.
2 Socket provided for use with open-ratedlamps. For enclosed-rated lamps, in-clude lens from lens type field.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Series
AHW
Wattage/lamp1,2
Metal Halide50M70M
100M150M
Ceramic Metal Halide50MHC70MHC
100MHC150MHC
Aperture3
468
Trim color
AR ClearPR Pewter
UBR UmberWTR Wheat
WR White painted4
Options/accessories
See pages 266-271.
Voltage
120277347
Finish
(blank) Semi-specularLD Matte-diffuse
Lens type
(blank) No lensCGL Clear glass lens
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
226 www.gothamlighting.com, keyword: AHZ
Intended Use
For general downlight applications such as offices, corridors, lobbies, airports, retail locations andreception areas that demand superior brightness control in shallow plenum areas.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector withtempered prismatic lens. PatentedBounding Ray™ Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from the topof the reflector to bottom, providing
Ordering Information Example: AHZ 100M 6AR 120
NOTES:
1 Recommended for use with coatedlamps. See specification sheets for ad-ditional lamp types.
2 Not available with LD finish.
Expandable, self-locking mountingbars provide horizontal and verticaladjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
optimal fixture performance andefficiency. Hinged lampdoor reducesstray light in the plenum.
Electrical SystemPrewired, encased-and-potted, tray-mounted ballast module. Sockethousing designed for effective heat-dissipation. Thermally activated
insulation detector. Medium-baseporcelain socket with nickel-platedscrew shell.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yokeutilized to retain optical system.
Series
AHZ
Aperture
68
Voltage
120277347
Options/accessories
See pages 266-271.
Finish
(blank) Semi-specularLD Matte-diffuse
J B
B A
B
L
W
H
Wattage/lamp1
Metal Halide50M70M
100MCeramic Metal Halide
50MHC70MHC
100MHC
Trim color
AR ClearPR Pewter
UBR UmberWTR Wheat
WR White painted2
MB Black baffle2
WB White baffle2
BC Black cone2
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
For general downlight or accent applications in offices, hotels, lobbies, churches, auditoriums andretail locations.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. PatentedBounding Ray™ Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from top ofreflector to bottom. Patent-pendingintegrated snoot and optical system
minimizes lamp striations normallyassociated with PAR lamps andcreates visually pleasing scallops onvertical surfaces.
housing. Thermally activatedinsulation detector. Medium-baseporcelain socket with nickel-platedscrew shell.
Mounting16-gauge galvanized steel mounting/plaster frame with thru-wire junctionbox. Integral yoke utilized to retain
Ordering Information Example: APRH P2039MHC 4AR 120
Wattage/lamp
Metal Halide70M PAR38
100M PAR38150M PAR38
Ceramic Metal Halide39MHC PAR20 or PAR3070MHC PAR30 or PAR38
100MHC PAR38150MHC PAR38
Aperture1
468
Voltage
120277347
Options/accessories
See pages 266-271.
Trim color
AR ClearBR Black2
PR PewterUBR UmberWTR Wheat
MB Black baffle2,3
WB White baffle2,3
Finish
(blank) Semi-specularLD Matte-diffuse
NOTES:
1 Refer to chart for wattage/lampavailability.
2 Not available with LD finish.
3 Available in 4” and 6” aperture only.
www.gothamlighting.com, keyword: APRH
L
W
H
Series
APRH
optical system. Expandable, self-locking mounting bars providehorizontal and vertical adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Size
P20P30P38
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Suitable for offices, restaurants, showrooms, museums, retail locations and reception areas wheredirectional accent lighting is desired.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse cone designed tominimize backflash. Contour cutminimizes visibility of inner housing.Center Beam optical system centerslamp relative to the aperture,optimizing lamp efficiency. Opticalsystem retained by two self-aligning, torsion support springs.Relamping capability from above orbelow ceiling.
MountingRolled steel housing with matte blackfinish and plaster flange. Expandable,self-locking mounting bars providehorizontal and vertical adjustment.Secondary housing adjustmentsystem for precise ceiling-to-flangealignment. Tool-less access door to
Ordering Information Example: DPH P38100M 8ACT30 120
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Adjustment MechanismTool-less 0°-40° vertical and 360°horizontal adjustment. Hot lampaiming capability. Lockableadjustment mechanisms maintainlamp position and are visible frombelow the ceiling with opticalsystem removed.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
MountingRolled steel housing with matteblack finish and plaster flange willaccommodate up to 1-1/2” thickceiling. Tool-less access door providesaccess to thru-wire junction box.Expandable, self-locking mountingbars provide horizontal and verticaladjustment. Secondary housing
adjustment system for preciseceiling-to-flange adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Electrical SystemPrewired, encased-and-potted, tray-mounted ballast module.Lampholder housing designed for
locking mounting bars providehorizontal and vertical adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and wet locations. Listedand labeled to comply with CanadianStandards.
W
L
H
W
L
H
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
DoorDie-cast aluminum door frame withgasketed flange. Regressed whitedoor (RW), stepped black baffle(SB), stepped white baffle (SW) orflush white door (FW) are available.White painted flange.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and wet locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Series
LAH
Wattage/lamp
Metal Halide50M70M
100M150M175M250M1
Ceramic Metal Halide50MHC70MHC
100MHC150MHC
Aperture/door frame2
11RW Regressed white door12SB Stepped black baffle
12SW Stepped white baffle12FW Flush white door
Lens type
11”T73 Tempered prismatic lensSFL Semi-flush lens
DOL Drop opal lens12”
T73 Tempered prismatic lensFFL Flat Fresnel lens
FHL Flat Holophane lensDHL Drop Holophane lens
Voltage
120208240277347
Options/accessories
See pages 266-271.
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
232 www.gothamlighting.com, keyword: A
Intended Use
For general downlight applications such as offices, corridors, lobbies, retail and reception areasrequiring optimal color rendering, superior optical control and convenient dimming.
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular reflector.Patented Bounding Ray™ OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image, lamp image thatreflects smoothly from the top of
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Ordering Information Example: A 6AR
NOTES:
1 Refer to chart for maximum wattage/lampavailability.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Expandable, self-locking mounting bars providehorizontal and vertical adjustment.
H
L
W
Series
A
Aperture1
468
1 2
Trim color
AR ClearPR Pewter
UBR UmberWTR Wheat
CR Champagne goldGR Gold
WR White painted2
BC Black cone2
MB Black baffle2
WB White baffle2
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Lens type
(blank) No lensCGL Clear glass lensT73 Tempered prismatic lens
Options/accessories
See pages 266-271.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
For general downlight wallwash applications, such as offices, corridors, lobbies, retail and receptionareas requiring optimal color-rendering, superior optical control and convenient dimming.
Ordering Information Example: AW 6AR
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular reflector withsemi-specular wallwash kicker.Patented Bounding Ray™ OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image, that reflects smoothlyfrom the top of the reflector to theaperture, and optimal fixture
performance and efficiency.Patented hybrid wallwash kickerprovides uniform verticalillumination with light high on thewall, close to the ceiling and noroomside “backflash.”
insulation detector. Medium-baseporcelain socket with nickel-platedscrew shell.
Mounting16-gauge galvanized steelmounting/plaster frame with thru-wire junction box. Integral yoke andflat spring utilized to retain opticalsystem. Expandable, self-locking
mounting bars provide horizontaland vertical adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
W
L
H
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
For general downlight or wallwash applications, such as offices, corridors, lobbies, retail andreception areas requiring optimal color rendering, superior optical control and convenient dimmingin shallow plenum areas.
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular reflector.Patented Bounding Ray™ OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image, and smooth transitionfrom the top of the reflector to thebottom, and optimal fixture
performance and efficiency. Hingedlamp door reduces stray light in theplenum. Wallwash design includespatented hybrid kicker, providinguniform vertical illumination.
Electrical SystemSocket housing designed foreffective heat dissipation. Thermally
Open or Wallwash Reflector, Low ProfileOpen or Wallwash Reflector, Low ProfileOpen or Wallwash Reflector, Low ProfileOpen or Wallwash Reflector, Low ProfileOpen or Wallwash Reflector, Low Profile
activated insulation detector.Medium base porcelain socket withnickel-plated screw shell.
Mounting16-gauge galvanized steel mounting/plaster frame with thru-wire junctionbox. Integral yoke utilized to retainoptical system. Expandable, self-
locking mounting bars providehorizontal and vertical adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.IN
CIN
CIN
CIN
CIN
C AN
DES
CEN
T D
OW
NLI
GH
TIN
GA
ND
ESCE
NT
DO
WN
LIG
HTI
NG
AN
DES
CEN
T D
OW
NLI
GH
TIN
GA
ND
ESCE
NT
DO
WN
LIG
HTI
NG
AN
DES
CEN
T D
OW
NLI
GH
TIN
G
H
J B
J B
W
L
Series
AZAZW
Aperture1
68
Trim color
AR ClearPR Pewter
UBR UmberWTR Wheat
CR Champagne goldGR Gold
WR White painted2
BC Black cone2,3
MB Black baffle2,3
WB White baffle2,3
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Lens type
(blank) No lensCGL Clear glass lensT73 Tempered prismatic lens3
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
For general downlight applications such as offices, hotels, lobbies, churches, auditoriums and retaillocations where optimal color rendering and convenient dimming are desired.
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular reflector.Patented Bounding RayTM OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image, and smooth transitionfrom top of reflector to bottom.Patent-pending integrated snoot and
optical system minimizes lampstriations normally associated withPAR lamps and creates visuallypleasing scallops on vertical surfaces.
Electrical SystemDie-cast aluminum lampholderhousing. Thermally activatedinsulation detector. Medium base
porcelain socket with nickel-platedscrew shell.
Mounting16-gauge galvanized steel mountingframe with thru-wire junction box.Integral yoke and flat spring utilizedto retain optical system.Expandable, self-locking mounting
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
NOTES:
1 Refer to chart for maximum wattage/lamp availability.
2 Not available with finishes.
3 Available in 4” and 6” aperture only.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
A small-aperture quartz incandescent fixture suitable for applications with high ceilings, such aschurches, malls or auditoriums.
Optical SystemSemi-specular upper reflector and self-flanged, semi-specular, matte-diffuseor specular finishing trim provideoptimal glare control. Three presetdistribution patterns available withprotective lamp guard standard.Relamping capability from above orbelow ceiling without the use of tools.
www.gothamlighting.com, keyword: GQ
Ordering Information Example: GQ 250 M 6AR
NOTES:
1 Recommended for use with frosted lamp.2 Not available with finishes.
INC
INC
INC
INC
INC A
ND
ESCE
NT
DO
WN
LIG
HTI
NG
AN
DES
CEN
T D
OW
NLI
GH
TIN
GA
ND
ESCE
NT
DO
WN
LIG
HTI
NG
AN
DES
CEN
T D
OW
NLI
GH
TIN
GA
ND
ESCE
NT
DO
WN
LIG
HTI
NG
Electrical SystemHeavy-duty mini-can socket for T-4lamp is integrated into the die-castaluminum housing with 3 square feetof surface area to dissipate heat andimprove lamp life. Thermallyactivated insulation detector.
Mounting16-gauge painted steel mounting/plaster frame with thru-wire junctionbox will accommodate up to 1-1/2"thick ceiling. Expandable, self-lockingmounting bars provide horizontal andvertical adjustment. Secondaryhousing adjustment system forprecise ceiling-to-flange adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards. Suitable for installationon non-fire resistant material.
H
L
W
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
A small-aperture quartz incandescent fixture suitable for applications with high ceilings, such aschurches, malls or auditoriums.
Optical SystemSemi-specular upper reflector andself-flanged, semi-specular, matte-diffuse or specular compoundcontour finishing trim provideoptimal glare control. Center beamoptical system centers the lamprelative to the aperture, optimizingluminaire efficiency. Three presetdistribution patterns available withprotective lamp guard standard.Relamping capability from above or
below ceiling without the use oftools.
Adjustment MechanismTool-less, lockable 0° to 30° verticaladjustment mechanism maintainslamp position and is visible frombelow the ceiling with the finishingtrim removed. Full 360° horizontaladjustment.
Electrical SystemHeavy-duty mini-can socket for T-4
www.gothamlighting.com, keyword: GQT
lamp is integrated into the die-castaluminum housing with 3 squarefeet of surface area to dissipateheat and improve lamp life.Thermally activated insulationdetector.
Mounting16-gauge painted steel mounting/plaster frame with thru-wirejunction box will accommodate up to1-1/2” thick ceiling. Expandable,self-locking mounting bars provide
Ordering Information Example: GQT 250 M 6AR
NOTES:
1 Recommended for use with frosted lamp.2 Not available with finishes.
INC
INC
INC
INC
INCA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
G
horizontal and vertical adjustment.Secondary housing adjustmentsystem for precise ceiling-to-flangeadjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards. Suitable for installationon non-fire resistant material.
H
L
W
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Electrical SystemLampholder housing designed foreffective heat dissipation. Thermallyactivated insulation detector.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and wet locations. Listedand labeled to comply with CanadianStandards.
INC
INC
INC
INC
INC A
ND
ESCE
NT
DO
WN
LIG
HTI
NG
AN
DES
CEN
T D
OW
NLI
GH
TIN
GA
ND
ESCE
NT
DO
WN
LIG
HTI
NG
AN
DES
CEN
T D
OW
NLI
GH
TIN
GA
ND
ESCE
NT
DO
WN
LIG
HTI
NG
HH
W
L
Aperture1
68
1 0
Door frame
RW Regressed white doorSB Stepped black baffle
NOTES:
1 Refer to chart for maximum wattageavailability.
W
L
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and wet locations. Listedand labeled to comply with CanadianStandards.
INC
INC
INC
INC
INCA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
GA
ND
ESCENT D
OW
NLIG
HTIN
G
L
W
H
L
W
H
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Series
LA
Aperture/door frame1
11RW Regressed white door12SB Stepped black baffle
12SW Stepped white baffle12FW Flush white door
Lens type
11”T73 Tempered prismatic lensDOL Drop opal lensSFL Semi-flush lens
Suitable for offices, restaurant, showrooms, museums, retail and reception areas where directionalaccent lighting is desired.
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular cone designed tominimize backflash. Contour cutminimizes visibility of innerhousing. Center Beam opticalsystem centers lamp relative to theaperture, optimizing lampefficiency. Optical system retainedby two self-aligning, torsion support
springs. Relamping capability fromabove or below ceiling.
Adjustment MechanismTool-less 0°- 40° vertical and 360°horizontal adjustment. Hot lampaiming capability. Lockableadjustment mechanisms maintainlamp position and are visible frombelow the ceiling with opticalsystem removed.
Electrical SystemThermally activated insulationdetector. Medium-base porcelainsocket with nickel-plated screwshell.
MountingRolled steel housing with matteblack finish and plaster flange.Expandable, self-locking mountingbars provide horizontal and vertical
adjustment. Secondary housing ad-justment system for precise ceiling-to-flange alignment. Tool-less accessdoor to thru-wire junction box.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Series
DP
Options/accessories
See pages 266-271.
Lamp type
PAR16-30S PAR16, PAR20 or PAR30S(short-neck) (75W max.)
PAR30L-38 PAR30L (longneck) or PAR38(250W max.)
PAR46 PAR46 (200W max.)PAR56 PAR56 (300W max.)
Aperture1
468
Type
T00 Cut for angles0°-15°
T20 Cut for angles15°-25°
T30 Cut for angles25°-40°
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Trim color
AC ClearPC Pewter
UBC UmberWTC Wheat
CC Champagne goldGC GoldBC Black2
WC White painted2
MB Black baffle2
WB White baffle2
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Catalog Lamp Height Length Width Ceiling OverlapNo. type (H) (L) (W) Aperture opening trim
Suitable for wallwash applications such as museums, offices, retail areas, showrooms, lobbies andrestaurants.
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular compoundcontour finishing trim incombination with keyed, proprietaryGotham® spread lens delivers auniform distribution of light to thewall. Enclosed lamp compartmentreduces stray light in the plenum.
NOTE:
1 Refer to chart for maximum wattage avail-ability.
Relamping capability from above orbelow ceiling without the use oftools.
Electrical SystemThermally activated insulationdetector. Medium-base porcelainsocket with nickel-plated screwshell.
MountingRolled steel housing with matteblack finish and plaster flange willaccommodate up to 1-1/2" thickceiling. Tool-less access doorprovides access to thru-wire junctionbox. Expandable, self-lockingmounting bars provide horizontaland vertical adjustment. Secondary
housing adjustment system forprecise ceiling-to-flange adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Optical SystemInternal housing components paintedmatte black. Lamp snoot minimizesstray light in housing. Optical designmaximizes light output whileminimizing high-angle brightness.Lamp is visible before reflectedlamp image. Optical system(seamless white cast faceplate in 1",2", and 3") retained by two self-aligning torsion support springs.
Ordering Information Example: DLV DWN MR16 4AC 120
Accommodates up to two lenses.Safety lens standard with requiredlamp type. Relamping capabilityfrom above and below ceiling.
MountingRolled steel housing with matteblack finish and plaster flange.Expandable, self-locking mountingbars provide horizontal and verticaladjustment. Secondary housingadjustment system for preciseceiling-to-flange alignment. Thru-wire junction box with bottom-
hinged access covers and springlatches.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
H
Aperture1
12
234
Series
DLV
Trim color/type
AC Clear3
PC Pewter3
UBC Umber3
WTC Wheat3
CC Champagne gold3
GC Gold3
B Black4,5
BC Black cone3,5
WC White painted5,6
MB Black baffle3,5
WB White baffle5,6
P Pinhole5,7
Lamp type
MR16MR11ALR12ALR18AR70
Voltage
120277347
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Options/accessories
See pages 266-271.
Configuration
DWN
W
L
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Catalog Lamp type Height Length Width Ceiling OverlapNo. (Max. 75W) Aperture (H) (L) (W) opening trim
MountingRolled steel housing with matteblack finish and plaster flange.Expandable, self-locking mountingbars provide horizontal and verticaladjustment. Secondary housingadjustment system for precise
Adjustment MechanismTool-less 360° horizontal lampadjustment is made with opticalsystem lowered below ceiling.Adjustment mechanism locks tomaintain lamp position duringrelamping.
Electrical SystemTool-less replaceable socket
ceiling-to-flange alignment. Thru-wire junction box with bottom-hinged access covers and springlatches.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Catalog Lamp type Height Length Width Ceiling OverlapNo. (Max. 75W) Aperture (H) (L) (W) opening trim
Optical SystemInternal housing components paintedmatte black. Lamp snoot minimizesstray light in housing. Lamppositioned for maximum output.Cone or chamfered aperturedesigned to minimize backflash.Optical system (seamless white castfaceplate in 1", 2" and 3") retainedby two self-aligning torsion supportsprings. Accommodates up to twolenses. Safety lens standard with
Ordering Information Example: DLV ADJ MR16 4ACT30 120
required lamp type. Relampingcapability from above or belowceiling.
Adjustment Mechanism0°-45° vertical and 360° horizontaladjustment. Tool-less adjustment ismade with optical system loweredbelow ceiling for simple focusing.
Electrical SystemTool-less replaceable socket
Intended Use
Suitable for offices, reception areas, restaurants, showrooms, museums, and retail locations whereaccent lighting is desired.
NOTES:
1 See chart for lamp type availability.2 Available with Pinhole (P) or Slotted (S)
trim type only.
3 Not available with finishes.
4 Available in 4" aperture only.5 Available in 3" and 4" aperture only.
6 Available in 1" aperture only.
7 Available in 1" and 2" apertures only.8 Available in 2" aperture only.
MountingRolled steel housing with matteblack finish and plaster flange.Expandable, self-locking mountingbars provide horizontal and verticaladjustment. Secondary housing
adjustment system for preciseceiling-to-flange alignment. Thru-wire junction box with bottom-hinged access covers and springlatches.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Aperture1
12
234
Series
DLV
Trim color/type
AC ClearPC Pewter
UBC UmberWTC Wheat
CC Champagne goldGC GoldBC Black3
WC White painted3,4
MB Black baffle3,5
WB White baffle3,4
P Pinhole3,6
S Slotted3,7
Lamp type
MR16MR11ALR12ALR18AR70
Configuration
ADJ
Voltage
120277347
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Options/accessories
See pages 266-271.
Taper
T Tapered cutcone8,9
T00 Straight cut, forangles 0°-15°5
T20 Tapered cut, forangles 15°-25°5
T30 Tapered cut, forangles 25°-45°5
Catalog Lamp type Height Width Length Ceiling OverlapNo. (Max. 75W) Aperture (H) (W) (L) opening trim
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
LLLL L OW
O
W
OW
O
W
OW
VO
LVO
LVO
LVO
LVO
L TTTT TAAAA A
GE
AG
E A
GE
AG
E A
GE
A CCCC CCE
NT
CEN
TCE
NT
CEN
TCE
NT
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
245www.gothamlighting.com, keyword: DLV
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular cone designed tominimize backflash. Contour cutminimizes visibility of inner housing.Center Beam optical system centerslamp relative to the aperture,optimizing lamp efficiency. Opticalsystem retained by two self-aligningtorsion support springs. Relampingcapability from above or below
Ordering Information Example: DLV MR16 6ACT00 120
Intended Use
Suitable for offices, reception areas, restaurants, showrooms, museums, and retail locations whereaccent lighting is desired.
NOTES:
1 Available in 120V only.2 See chart for lamp type availability.
ceiling. Safety lens standard withrequired lamp type.
Adjustment MechanismTool-less 0°- 40° vertical and 360°horizontal adjustment. Hot lampaiming capability. Lockableadjustment mechanisms maintainlamp position and are visible frombelow the ceiling with opticalsystem removed.
bars provide horizontal and verticaladjustment. Secondary housing ad-justment system for precise ceiling-to-flange alignment. Tool-less accessdoor to thru-wire junction box.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Aperture2
68
Series
DLV
Trim color/type
AC ClearPC Pewter
UBC UmberWTC Wheat
CC Champagne goldGC GoldBC Black3
WC White painted3
MB Black baffle3
WB White baffle3
Voltage
120277347
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Options/accessories
See pages 266-271.
Taper
T00 Straight cut, for angles0°-15°
T20 Tapered cut, for angles15°-25°
T30 Tapered cut, for angles25°-45°
Lamp type
AR70AR111MR16PAR36
PAR561
Catalog Lamp Max. Height Length Width Ceiling OverlapNo. type Wattage (H) (L) (W) Aperture opening trim
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
L
W
H
system. Expandable, self-lockingmounting bars provide horizontaland vertical adjustment.
ListingsFixtures are UL Listed for thru-branch wiring, Non-IC recessedmounting and damp locations. Listedand labeled to comply with CanadianStandards.
Decorative HousingDurable, heavy gauge aluminumhousing. Textured polyester powderpaint finish available in Matte blackor Satin silver. The housing isavailable in short or tallconfigurations to allow for a varietyof ceiling height applications.
Decorative ElementsFour configurations allowcustomization suitable in any space:No ring (no decorative element);CCCC C O
and smooth transition from top ofreflector to bottom. Reflector flangevisually integrates with housing.Hinged lamp door seals upper trimfor optimal fixure efficiency. Innerreflector is field adjustable to threesettings that place the reflectorflush, 3/8” or 3/4” from the bottomedge of the decorative housing.
Class P, thermally-protected, highpower factor electronic ballast.
MountingRC120-black cord is provided forelectrical connection of luminaire tosurface-mounted canopy (120”standard).
ListingsFixtures are UL listed for damplocations. Listed and labeled tocomply with Canadian Standards.
Ordering Information Example: PDPF 2/32TRT 8DW MVOLT TSS RC120
www.gothamlighting.com, keyword: PDPF Candeo
NOTES:
1 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
2 Refer to page 253 for decorative and mount-ing options.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Decorative HousingDurable, heavy gauge aluminumhousing. Textured polyester powderpaint finish available in Matte blackor Satin silver. The housing isavailable in short or tallconfigurations to allow for a varietyof ceiling height applications.
Decorative ElementsFour configurations allowcustomization suitable in any space:No ring (no decorative element);Soft ring (subtle, formed aluminumbond polyester paint - black);Stacked rings (four injection-moldedblack acrylic rings); Gear (precisionformed from solid aluminum -
Decorative luminaire designed to accentuate the space, adding visual interest.
polyester powder paint - black).
Optical SystemICE™ self-flanged, matte-diffusereflector. Fluted vertical uppersection works in conjunction withPatented Bounding Ray™ OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image and smooth transitionfrom top of reflector to bottom.Reflector flange visually integrateswith housing. Hinged lamp doorseals upper trim for optimal fixtureefficiency.
Cross BaffleAcrylic cross baffle with surface that
provides a decorative edge-glowappearance. Available in threedistinctive styles - flush, round andangular.
ICE™ Color Cross BaffleRed, blue, amber or white acryliccross baffle, jacketed withaluminum (U.S. Patent No.6,273,592) provides a vibrant edge-glow color appearance. Available inflush or round baffle styles.
Turbo BaffleClear acrylic three-spoke turbobaffle with surface that provides adecorative edge-glow appearance.
MountingRC120-black cord is provided forelectrical connection of luminaire tosurface-mounted canopy (120”standard).
ListingsFixtures are UL listed for damplocations. Listed and labeled tocomply with Canadian Standards.
www.gothamlighting.com, keyword: PDPF ICE
NOTES:
1 Multi-volt electronic ballast capable ofoperating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
2 Refer to page 253 for decorative and mount-ing options.
COM
PCO
MP
COM
PCO
MP
COM
PAA AAACC CCCT FLT FLT FLT FLT FLU
ORESCEN
T ELEU
ORESCEN
T ELEU
ORESCEN
T ELEU
ORESCEN
T ELEU
ORESCEN
T ELEVV VVVAA AAATION
S™TIO
NS™
TION
S™TIO
NS™
TION
S™
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Options/accessories
See pages 253, 266-271.
Series
PDPF
Wattage/lamp
2/32TRT
Decorative elements2
NR No ringS Soft ringC Stacked ringsG Gear
Mounting method2
RC120 Cord mount(120” provided)
SM Surface mount
Voltage
120277347
MVOLT1
Color
B Matte blackS Satin silver
Housing
S ShortT Tall
Reflector/baffle type
ICE™8T Turbo
8XF Clear flush8XR Clear round8XA Clear angular
ICE™ Color8RLRF Red flush8RLRR Red round8BLRF Blue flush8BLRR Blue round8ALRF Amber flush8ALRR Amber round8WLRF White flush8WLRR White round
Ordering Information Example: PDPF 2/32TRT 8T MVOLT TSC RC120
Decorative HousingDurable, heavy gauge aluminumhousing. Textured polyester powderpaint finish available in Matte blackor Satin silver. The housing isavailable in short or tallconfigurations to allow for a varietyof ceiling height applications.
Decorative ElementsFour configurations allowcustomization suitable in any space:No ring (no decorative element);Soft ring (subtle, formed aluminumCCCC C O
PDPFHorizontal or Vertical LampHorizontal or Vertical LampHorizontal or Vertical LampHorizontal or Vertical LampHorizontal or Vertical Lamp
Triple-Tube (TRT)
Intended Use
Decorative luminaire designed to accentuate the space, adding visual interest.
bond polyester paint - black);Stacked rings (four injection-moldedblack acrylic rings); Gear (precisionformed from solid aluminum -polyester powder paint - black).
Optical SystemSelf-flanged semi-specular ormatte-diffuse reflector. PatentedVertisys® - Bounding Ray™ OpticalPrinciple design (U.S. Patent No.5,800,050) provides lamp beforelamp image and smooth transitionfrom top of reflector to bottom.
Reflector flange visually integrateswith housing.
Electrical SystemPositive-latch, thermoplasticsocket(s). Class P, thermally-protected, high power factorelectronic ballast.
MountingSurface-mounted canopy attachesdirectly to J-box and provides hands-free electrical connection. Canopyalso serves as ballast compartment.
Ordering Information Example: PDPF 32TRT 8AR MVOLT TSNR RC120
www.gothamlighting.com, keyword: PDPF
NOTES:
1 Multi-volt electronic ballast capable ofoperating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
2 Refer to page 253 for decorative and mount-ing options.
Emergency back-up available - testswitch integral to ballast housing.RC120-black cord is provided forelectrical connection of luminaire tosurface-mounted canopy (120”standard). SM - Luminaire ismounted directly to the surface-mounted canopy.
ListingsFixtures are UL listed for damplocations. Listed and labeled tocomply with Canadian Standards.
Lens type
(blank) No lensCGL Clear
glass lensT73 Tempered
prismaticlens
Series
PDPF
Decorative elements2
NR No ringS Soft ringC Stacked ringsG Gear
Mounting method2
RC120 Cord mount(120”provided)
SM Surfacemount
Voltage
120277347
MVOLT1
Color
B Matte blackS Satin silver
Housing
S ShortT Tall
Finish
(blank) Semi-specular
LD Matte-diffuse
Wattage/lamp
Horizontal2/32TRTVertical26TRT32TRT42TRT
Options/accessories
See pages 253, 266-271.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Decorative HousingDurable, heavy gauge aluminumhousing. Textured polyester powderpaint finish available in Matte blackor Satin silver. The housing isavailable in short or tallconfigurations to allow for a varietyof ceiling height applications.
Decorative ElementsFour configurations allowcustomization suitable in any space:No ring (clean, simple form - nodecorative element); Soft ring
MountingSurface-mounted canopy attachesdirectly to J-box and provides hands-free electrical connection. Canopyalso serves as ballast compartment.
Ordering Information Example: PDPH 100M 8AR 120 HEB SBG RC120
www.gothamlighting.com, keyword: PDPH
NOTES:
1 Recommended for use with coated lamps.2 Refer to page 253 for decorative and mount-
ing options.
HID
ELEH
ID ELE
HID
ELEH
ID ELE
HID
ELEVV VVVAA AAATION
S™TIO
NS™
TION
S™TIO
NS™
TION
S™
RC120-black cord is provided forelectrical connection of luminaire tosurface-mounted canopy (120”standard). SM - Luminaire ismounted directly to the surface-mounted canopy.
ListingsFixtures are UL listed for damplocations. Listed and labeled tocomply with Canadian Standards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
H
Dia.
Decorative elements2
NR No ringS Soft ringC Stacked ringsG Gear
Mounting method2
RC120 Cordmount(120”provided)
SM Surfacemount
Housing
S ShortT Tall
Finish
(blank) Semi-specular
LD Matte-diffuse
Reflector color
8AR Clear8PR Pewter
8UBR Umber8WTR Wheat
Color
B Matteblack
S Satinsilver
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
252
Decorative HousingDurable, heavy gauge aluminumhousing. Textured polyester powderpaint finish available in Matte blackor Satin silver. The housing isavailable in short or tallconfigurations to allow for a varietyof ceiling height applications.
Decorative ElementsFour configurations allowcustomization suitable in any space:No ring (clean, simple form - no
PDPAA21, A23 or PS25 Lamp
Intended Use
Decorative luminaire designed to accentuate the space, adding visual interest.
2 Refer to page 253 for decorative and mount-ing options.
directly to J-box and provides hands-free electrical connection.
RC120 – black cord is provided forelectrical connection of luminaire tosurface-mounted canopy (120”standard). SM – luminaire ismounted directly to the surface-mounted canopy.
ListingsFixtures are UL listed for damplocations. Listed and labeled tocomply with Canadian Standards.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Intended Use
Provides general illumination with superior brightness control. Lamp and aperture combinationsallow for use in atriums, corridors, restrooms, retail areas, public areas and transit areas.
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
255www.gothamlighting.com, keyword: CFVL
Intended Use
Provides general illumination for school, retail and transit areas. Lens options provide a variety ofdistributions.
Optical SystemWhite painted upper reflector.
DoorRegressed door (RW) or steppedblack baffle (SB) are available. Dooris retained by two self-aligning,torsion support springs.
HousingHeavy-gauge aluminum housingwith top deck for clean appearance.Reflector edge seats flush withcylinder wall for clean, one-pieceappearance.
Patent No. 4,300,190). Wall mountor pendant mount available.
ListingsFixtures are UL Listed for wetlocations. Wall and pendantmounted options are UL Listed fornon-covered ceiling installations.Listed and labeled to comply withCanadian Standards.
Dia.
H
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
DWHG Matte white (standard)DDB Dark bronzeDBL Black
DNA Natural aluminumDWH Gloss white
DTG Tennis greenDGC Charcoal greyDSS Sandstone
Door frame
RW Regressed doorSB Stepped black
baffle
Lens type
T73 Temperedprismatic lens
FFL Flat Fresnel lensFOL Flat opal lens
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
256 www.gothamlighting.com, keyword: CF
Intended Use
Provides general illumination with superior brightness control. Lamp and aperture combinationsallow for use in atriums, corridors, restrooms, retail areas, public areas and transit areas.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. PatentedBounding RayTM Optical Principledesign (U.S. Patent No. 5,800,050)provides lamp before lamp image,and smooth transition from top ofreflector to bottom.
Ordering Information Example: CF11 2/26TRT 10AR 120 DWHG
NOTES:
1 Matte white finish (DWHG) standard.2 Available in 6” aperture only.
3 Available in 8” or 10” aperture only.
4 Available in 10” aperture DTT lamps only.5 Available in single lamp 10” aperture
only.
6 Refer to chart for number of lamps andlamp type availability.
7 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Open CylindersOpen CylindersOpen CylindersOpen CylindersOpen Cylinders
HousingAluminum housing with integralbottom deck for clean appearance.Reveal on standard ceiling andoptional pendant mount givefloating luminaire appearance.
ListingsFixtures are UL Listed for damplocations. Listed and labeled tocomply with Canadian Standards.
W
Dia.
H
Series1
CF102
CF113
Wattage/lamp
13DTT18DTT26DTT18TRT26TRT32TRT42TRT
57TRT5
Options/accessories
See pages 266-271.
Voltage
120277347
MVOLT7
Aperture6
68
1 0
Trim color
AR ClearPR Pewter
UBR UmberWTR Wheat
Finish
(blank) Semi-specularLD Matte-diffuse
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
DNA Natural aluminumDWH Gloss white
DTG Tennis greenDGC Charcoal greyDSS Sandstone
No. of lamps
1234
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Catalog No. of lamps/ Wall mountNo. Aperture lamp type Diameter Height (H) width (W)
CF10 6 (15.2) 1 or 2 DTT/1 TRT 9-3/4 (24.8) 9-5/8 (24.4) 13 (33.0)CF11 8 (20.3) 1 or 2 DTT/1 TRT 10-3/4 (27.3) 10-5/8 (27.0) 14 (35.6)CF11 10 (25.4) 1, 2 or 3 DTT/1 or 2 TRT 11-5/16 (28.7) 10-1/4 (26.0) 14-9/16 (37.0)
/
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
257www.gothamlighting.com, keyword: CFZ
Intended Use
Provides general illumination for low to mid height ceilings. Use in corridors, restrooms, retail areasor offices. Cross baffle controls brightness and complements parabolic luminaires.
Ordering Information Example: CFZ11 2/26DTT 84A 120 DWHG
NOTES
1 Matte white finish (DWHG) standard.2 Available in ceiling mounted units only.
3 Multi-volt electronic ballast capable of op-erating on any line voltage from 120Vthrough 277V, 50 or 60 HZ.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Options/accessories
See pages 266-271.
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
Optical SystemSpecular clear upper reflector. Self-flanged, semi-specular or matte-diffuse cross baffle. Optical systemoptimally balances brightnesscontrol and high efficiency. Lamp isvisible before reflected lamp image.
Electrical SystemHorizontally-mounted, positive-latch, thermoplastic sockets. Class P,thermally-protected, high powerfactor ballast(s).
MountingCeiling mount (standard), wall
HousingAluminum housing with integralbottom deck for clean appearance.Reveal on standard ceiling andoptional pendant mount givefloating luminaire appearance.
mount or pendant mount available.
ListingsFixtures are UL Listed for damplocations. Listed and labeled tocomply with Canadian Standards.
Voltage
120277347
MVOLT3
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
258 www.gothamlighting.com, keyword: CFL
Intended Use
Provides general illumination for schools, retail and transit areas. Lens options provide a variety ofdistributions.
Optical SystemWhite painted upper reflector.
DoorRegressed door (RW) or steppedblack baffle (SB) are available. Dooris retained by two self-aligning,torsion support springs.
Electrical SystemHorizontally-mounted, positive-latchthermoplastic socket(s). Class P,thermally-protected, high powerfactor electronic ballast(s).
MountingCeiling mount (standard), wall
mount or pendant mount available.
ListingsFixtures are UL Listed for wetlocations. Wall and pendantmounted options are UL Listed forwet locations in non-covered ceilinginstallations. Listed and labeled tocomply with Canadian Standards.
CCCC C OM
PO
MP
OM
PO
MP
OM
P AAAA ACCCC C
T FL
T FL
T FL
T FL
T FL
UO
RESC
ENT
CYU
ORE
SCEN
T CY
UO
RESC
ENT
CYU
ORE
SCEN
T CY
UO
RESC
ENT
CYLI
ND
ERS
LIN
DER
SLI
ND
ERS
LIN
DER
SLI
ND
ERS
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Optical SystemSelf-flanged, semi-specular ormatte-diffuse reflector. Opticalsystem optimally balancesbrightness control and highefficiency.
with quick disconnect for ease ofinstallation/maintenance. Porcelainsocket with nickel-plated screw shell.
MountingCeiling mount, wall mount orpendant mount available.
Ordering Information Example: CC13 175M AR 120 DWHG
NOTES:
1 Matte white finish (DWHG) standard.2 3/8" thread mount, order stem separately.
3 Refer to chart for maximum wattage avail-ability.
4 150W and lower metal halide lamps usemedium-base socket. Recommended foruse with coated lamps.
5 Tempered safety lens provided.
Intended Use
Provides general illumination with superior brightness control. Surface, wall or pendant mountavailable. Appropriate for interior applications with mid to high ceilings, such as atriums,auditoriums and transit areas, or in exterior overhangs for retail and office buildings.
Open CylindersOpen CylindersOpen CylindersOpen CylindersOpen Cylinders
HousingHeavy-gauge aluminum. Reveal onceiling and pendant mount givefloating luminaire appearance.
Electrical SystemPre-wired, HPF, core-and-coil ballastmounted to removable power door
ListingsUL Listed for damp locations (11"and 13") or wet locations (15") fornon-covered ceiling installations.Listed and labeled to comply withCanadian Standards.
HID
CH
ID C
HID
CH
ID C
HID
CYY YYYLIND
ERSLIN
DERS
LIND
ERSLIN
DERS
LIND
ERS
Series1
CC Ceiling mountCP Pendant mount2
CW Wall mount
Diameter3
1 11 31 5
Trim color
AR ClearPR Pewter
UBR UmberWTR Wheat
Wattage/lamp4
Metal Halide50M5
70M5
100M5
150M5
175M5
250M5
320M5
350M5
400MCeramic Metal Halide5
50MHC70MHC
100MHC150MHC
WDia.
H
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Options/accessories
See pages 266-271.
Voltage
120208240277347
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
DoorRegressed aluminum door framewith Fresnel lens.
ListingsFixtures are UL Listed for wetlocations for non-covered ceilinginstallations. Listed and labeled tocomply with Canadian Standards.
NOTES:
1 Matte white finish (DWHG) standard.2 3/8" thread mount, order stem separately.
3 Refer to chart for maximum wattage avail-ability.
4 150W and lower metal halide lamps usemedium-base socket. Recommended foruse with coated lamps.
WDia.
H
Intended Use
Provides general illumination with superior brightness control. Surface, wall or pendant mountavailable. Appropriate for mid to high ceiling applications such as exterior columns and facades.
Electrical SystemPre-wired, HPF core-and-coil ballastmounted to removable power doorwith quick disconnect for ease of
installation/maintenance. Porcelainsocket with nickel-plated screwshell.
MountingCeiling mount, wall mount orpendant mount available.
Voltage
120208240277347
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Provides general illumination in schools, retail or other mid- to high-ceiling applications wheresimple, inexpensive dimming and superior color rendering are required. Brightness control isachieved with a black baffle system.
MountingCeiling mount (standard) wallmount or pendant mount available.
Pendant mount option requires 1/4”IPS stem Gotham® nomenclaturefor stem and hang straight swivel is“CAS.” Length of stem must bespecified (from 6” to 48” in 6”increments).
NOTES:
1 Matte white finish (DWHG) standard.2 Maximum wattage for wall mount op-
tion is Q250W PAR38.
W
Dia.
H
ListingsFixtures are UL Listed for damplocations. Wall mounted option is ULListed for wet locations for non-covered ceiling installations. Listedand labeled to comply with CanadianStandards.
Series1
CA6
Aperture/trim
6MB Black baffle
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Options/accessories
See pages 266-271.
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
1 Matte white finish (DWHG) standard.2 Available in 6” aperture only.
3 Available in 8” aperture only.
4 Not available with finishes.
Intended Use
Provides general illumination with superior brightness control. Appropriate for mid to high ceilings.Use in schools, retail or other areas where simple, inexpensive dimming and excellent colorrendering are required.
MountingCeiling mount (standard) offerspatented quick-mount attachmentplate for direct installation (U.S.Patent No. 4,300,190). Wall mountor pendant mount available.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Options/accessories
See pages 266-271.
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
ListingsFixtures are UL Listed for damplocations. Listed and labeled tocomply with Canadian Standards.
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MM MMM
263www.gothamlighting.com, keyword: CAL
Ordering Information Example: CAL8 6RW T73 DWHG
Intended Use
Provides general illumination with superior brightness control. Appropriate for mid to high ceilings.Use in schools, retail or other areas where simple, inexpensive dimming and excellent color renderingare required.
NOTES:
1 Matte white finish (DWHG) standard.2 Available in 6” aperture only.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Options/accessories
See pages 266-271.
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
Optical SystemAnodized upper ellipsoidal reflectorand lower cone to provide high-intensity light output through asmall aperture, while maintaininghigh efficiency and minimizinghigh-angle brightness. Lower cone
is self-flanged, semi-specular,matte-diffuse or specular.
HousingHeavy-gauge aluminum housing.Reveal on ceiling and pendant mountgive floating luminaire appearance.
NOTES:
1 Matte white finish (DWHG) standard.2 3/8" thread mount, order stem separately.
ListingsFixtures are UL Listed for damplocations. Listed and labeled tocomply with Canadian Standards.
Aperture/trim color
8AC Clear8PC Pewter
8UBC Umber8WTC Wheat
8CC Champagne gold8GC Gold8BC Black3
8WC White painted3
8MB Black baffle3
8WB White baffle3
Series1
CC11 Ceiling mountCP11 Pendant mount2
CW11 Wall mount
Wattage/lamp
150T250T400T500T
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Options/accessories
See pages 266-271.
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
Provides direct and indirect light with superior brightness control. Appropriate for mid to highceilings. Use in schools, retail or other areas where simple, inexpensive dimming and excellent colorrendering are required.
Optical SystemSelf-flanged, semi-specular, matte-diffuse or specular cone maximizeslamp output while minimizing high-angle brightness.
NOTES:
1 Matte white finish (DWHG) standard.2 Not available with finishes.
base porcelain sockets with nickel-plated screw shell.
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Trim color
AC ClearPC Pewter
UBC UmberWTC Wheat
CC Champagne goldGC GoldBC Black2
WC White painted2
MB Black baffle2
WB White baffle2
Options/accessories
See pages 266-271.
Finish
(blank) Semi-specularLD Matte-diffuseLS Specular
Color
DWHG Matte white (standard)DDB Dark bronzeDBL Black
DNA Natural aluminumDWH Gloss white
DTG Tennis greenDGC Charcoal greyDSS Sandstone
Series1
CWU
Diameter
7A 150W PAR388A Q250W PAR38
PSG9
GO
GO
GO
GO
GO
THA
THA
THA
THA
THA
MMMM M
266
OOOO Opt
ions
& A
ptio
ns &
Apt
ions
& A
ptio
ns &
Apt
ions
& A
cccc c cccc ces
sori
eses
sori
eses
sori
eses
sori
eses
sori
es
NOTES:
1 See chart below for availability.
2 Add degree beam spread. See chart be-low.
3 Center beam candlepower.
4 Contact Philips Lighting.
Lamp type1
MR11MR16ALR12ALR18AR70
AR111PAR36PAR56
Wattage
2 03 55 06 57 17 5
100120240
Manufacturer
GE General ElectricSY Osram Sylvania
PH Philips
Distribution
__DBS Degree beam spread (specify)2
Ordering Information Example: MR16 50 40DBS GE
Low Voltage LampsLow Voltage LampsLow Voltage LampsLow Voltage LampsLow Voltage Lamps
SCWA Pulse start metal halide super constant wattage autotransformer ballast. Consult specification sheet for wattage and voltage availability.HEB Electronic HID ballast. 120V or 277V, 50 or 60 HZ. THD < 15%, PF > 0.90
AD Advance electromagnetic ballast. Fluorescent requires two-pin lamp.ADALI Advance ROVR™ electronic controllable ballast utilizing digital addressable lighting interface (DALI) protocol. Requires four-pin lamp (120V or 277V only).
ADCF Advance electronic fluorescent ballast. Requires four-pin lamp (120V or 277V only).ADEZ Advance Mark 10™ electronic line voltage control dimming ballast. (120V or 277V; 18DTT, 26DTT, 18TRT, 26TRT, 32TRT, 42TRT or 57TRT only). Requires four-pin lamp. Minimum dimming level 5%.ADZT Advance Mark 7™ electronic 0-10 VDC dimming ballast. (120V or 277V). Requires four-pin lamp. Minimum dimming level 5%.
DMHL Lutron Compact SE™ electronic 3-wire line voltage control dimming ballast. (120V or 277V; 18DTT, 26DTT, 18TRT, 26TRT, 32TRT or 42TRT only.) Requires four-pin lamp. Minimum dimming level 5%.DMHL3 Lutron Hi-Lume® electronic 3-wire line voltage control dimming ballast (120V or 277V; 26TRT or 32TRT only). Requires four-pin lamp. Minimum dimming level 1%.
2W5 Lutron Tu-Wire® electronic line voltage control dimming ballast. (120V or 277V; 18DTT, 26DTT, 18TRT, 26TRT, 32TRT or 42TRT only.)Requires four-pin lamp. Minimum dimming level 5%.
dimming level 3%.SDT Stepdown transformer (277V to 120V; 300W max.).
SDT347 Stepdown transformer (347V to 120V; 75W max.).QDS Quick disconnect system for easy fluorescent ballast replacement.
DS Dual switching.
Emergency
EL Emergency battery pack with integral test switch. Operates one lamp in emergency mode with battery back-up in case of power disruption.ELR Emergency battery pack with remote test switch. Operates one lamp in emergency mode with battery back-up in case of power disruption.
EL2LP Emergency battery pack with integral test switch. Operates two lamps in emergency mode with battery back-up in case of power disruption.ELR2LP Emergency battery pack with remote test switch. Operates two lamps in emergency mode with battery back-up in case of power disruption.
ELSD Emergency battery pack with integral test switch and self-diagnostics module. Operates one four-pin lamp in emergency mode with battery back-up in case of power disruption. Self-diagnosticmodule evaluates AC to DC transfer, charging and battery condition for five minutes every 30 days and 30 minutes every six months.
ELRSD Emergency battery pack with remote test switch and self-diagnostics module. Operates one four-pin lamp in emergency mode with battery back-up in case of power disruption. Self-diagnosticmodule evaluates AC to DC transfer, charging and battery condition for five minutes every 30 days and 30 minutes every six months.
ELRB94 Bodine B94 emergency battery pack with remote test switch. Operates one lamp in emergency mode with battery back-up in case of power disruption.BGTD Bodine GTD™ generator transfer device. Factory installed on fixture, senses loss of normal power and switches to auxiliary generator to power fixture for egress lighting.
QRS Quartz restrike system. Automatically energizes 120V double-contact, bayonet-base lamp (by others) during a momentary power interruption significant enough to cause HID lamp to drop out.Lamp stays on until HID lamp restrikes.
QRSTD Quartz restrike system with time delay. Operates like QRS, except auxilliary lamp remains on for two minutes after HID lamp restrikes.EC Emergency circuit. Factory-installed double-contact, bayonet-base socket with leads. For use with separate, external emergency power system.
Fusing
GMF Single, slow-blow fuse. (120V, 277V or 347V only.)GLR Single, fast-blow fuse. (120V, 277V or 347V only.)
SF Single fuse (120V, 277V or 347V only).DF Double fuse (208V or 240V only).
Trim
TRW White painted flange. (Standard with MB, WB, WC, or WR trim colors.)TRBL Black painted flange.TRDA Tamper-resistant door assembly. Includes two tamper-resistant screws. For added protection, use in combination with PCL lens option.GSKT Foam gasketing. Aids in reduction of light leaks and insect penetration, shipped uninstalled.CWW Corner wallwash.DWW Double wallwash.
PM Pendant mount, order stem separately.WM Wall mount.CYS 3/8" stem and canopy with 5° “hang straight” swivel. Consult factory for exterior applications. Length of stem must be specified (from 6” to 48” in 6” increments).CRS 3/8" stem and canopy with 45° swivel. Consult factory for exterior applications. Length of stem must be specified (from 6” to 48” in 6” increments).
Miscellaneous
LRC Provides compatibility with Lithonia Reloc® System. Lithonia Reloc System can be installed less this option with connectors provided by others. Access above ceiling required.RIF Radio inference filter. Inductive capacitor circuit designed to minimize interference from feedback into line. 120V through 347V, 50 or 60 HZ.CP Chicago plenum.
SCA Sloped ceiling adapter, aluminum with matte white finish for use in sloped ceiling application. Must specify prod-uct aperture and degree of slope. Example: SCA6 10D.
CTA Ceiling thickness adapter, galvanized steel for use in ceilings up to 2" thick.
BH24 Bar hangers, 24" galvanized steel bar hangers for T-bar mounting (set of two).
LSMC T-Bar mounting clips designed to lock bar hangers to T-bar (set of four). Not for use with BH24.
LFH Locking filter holder accommodates up to two lenses/louvers.
LTWFH Filter holder accommodates up to two lenses/louvers.
GFC Filter clips accommodates up to two lenses/louvers.
Provides an effective and attractive interface between sloped ceilings and Gotham® recessed luminaires.
FeaturesEach adapter is scaled specifically tothe aperture diameter of theluminaire. The adapter may bespecified for 10-30 degree slopes, in5 degree increments.
Mechanical design provides simplifiedinstallation with integral tabs.Integral tabs support the adapter tothe recessed downlight housing priorto installation of the trim.
Ordering Information Example: SCA6 15D
The self-flanged, heavy gaugealuminum adapter is coated with awhite, textured polyester powderfinish for durability.
www.gothamlighting.com, keyword SCA
Major axis
Ceiling opening
Product aperture
4568
1012
Degree of slope
10D15D20D25D30D
Series
SCA
Drawings are for dimensional detail only and may not represent actual mechanical configuration.Dimensions are shown in inches (centimeters) unless otherwise noted.
Sloped Ceiling Adapter Ordering Information and Dimensional DataDegree of slope (pitch)