Architect Series ® Traditional W-HG-1 Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com HUNG SECTION DIRECTORY Product Selection Guide Size and Performance Data ............................................................................................................. W-HG-2 STC/OITC ........................................................................................................................................... W-HG-2 Features and Options ....................................................................................................................... W-HG-3 Combination Assemblies .......................................................................................................................... W-HG-4 Glazing Performance ................................................................................................................................. W-HG-6 HurricaneShield ® Products with Impact-Resistant Glazing ................................................................... W-HG-9 Grille Types Grille Profiles ...................................................................................................................................W-HG-10 Grille Patterns ..................................................................................................................................W-HG-11 Custom Shapes ........................................................................................................................................W-HG-11 Size Tables for Double- and Single-Hung.............................................................................................W-HG-12 Cottage Sash Units .........................................................................................................................W-HG-15 Replacement Units ..........................................................................................................................W-HG-16 Design Data Special Sizes and Miscellaneous Formulas .................................................................................W-HG-20 Luxury Edition (LX) and Style Edition (SE) ...................................................................................W-HG-21 Replacement Units ..........................................................................................................................W-HG-26 Detailed Product Descriptions Clad Exterior LX and SE Double-, Single- and Simulated-Hung .............................................W-HG-31 Wood Exterior LX Double-, Single and Simulated Hung .........................................................W-HG-32 Unit Sections / Typical Joining Mullions Double-Hung Clad LX ....................................................................................................................W-HG-33 Double-, and Single-Hung Clad LX ..............................................................................................W-HG-34 Double-Hung Clad SE ....................................................................................................................W-HG-35 Fixed and Transoms ........................................................................................................................W-HG-36 Double- and Single-Hung Wood LX ............................................................................................W-HG-37 The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information.
38
Embed
Architect Series Traditional - Pellamedia.pella.com/professional/adm/Clad-Wood/AS-DH.pdf · Architect Series® Traditional Pella 2018 Architectural Design Manual Division 08 – Openings
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Architect Series® Traditional
W-HG-1Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SECTION DIRECTORY
Product Selection Guide
Size and Performance Data .............................................................................................................W-HG-2
Double-, and Single-Hung Clad LX ..............................................................................................W-HG-34
Double-Hung Clad SE ....................................................................................................................W-HG-35
Fixed and Transoms ........................................................................................................................W-HG-36
Double- and Single-Hung Wood LX ............................................................................................W-HG-37
The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information.
Architect Series® Traditional
W-HG-2Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
(—) = Not Available
(1) Maximum performance for single unit when glazed with the appropriate glass thickness. See Design Data pages in this section for specific product performance class and grade values.
(2) Published performance data for air infiltration is determined by testing a minimum of four (4) products of NFRC model size. Testing is conducted in accordance with ASTM E283. Air infiltration ratings for products will differ by size. The performance data does not apply to
combination assemblies unless noted. Actual product performance may vary for a number of reasons including installation and product care.
(3) The higher the level, the greater the product’s ability to resist forced entry.
(4) Glazing configurations may result in higher operational forces
(5) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration.
Clad LX Wood LX Clad SE
SIZESStandard double-hung vent / fixed sizes l l l
— Traditional, Prairie, Top Row, Cross, New England, Victorian, Diamond, Custom
Roomside Removable Gri l les
— Traditional, Prairie, Custom
Gril les-Between-the-Glass
— Traditional, Prairie, Top Row 1, Cross or Custom-Equally Divided
SCREENS
— Full-Height or Half-height InView™ screens or Vivid View® screens
Architect Series® Traditional
W-HG-4Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion.
Pella window combinations are available in an endless variety of arrangements. Below are available factory-assembled combinations. Some units can be fixed or vent depending on availability. Refer to Clad / Wood Overview Section for typical combinations requirements, and limitations related to mulling various combinations.
Contact your local Pella sales representative for more information.
W-HG-5Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
COMBINATION ASSEMBLIES
Arch Top Units
Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion.
Pella window combinations are available in an endless variety of arrangements. Below are available factory-assembled combinations. Some units can be fixed or vent depending on availability. Series. Refer to Clad / Wood Overview Section for typical combinations requirements, and limitations related to mulling various combinations.
Contact your local Pella sales representative for more information.
Refer to Clad / Wood Overview Section for standard size range charts.
with grilles-between-the-glass PEL-N-179-01126-00001 0.33 0.47 0.54 56 26
with integral grilles PEL-N-179-01127-00001 0.34 0.47 0.54 56 25
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
Non Rectangular Unit thermal values will vary slightly.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Climate Zones
Architect Series® Traditional
W-HG-7Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
GLAZING PERFORMANCE - TOTAL UNIT
Wood ExteriorG
lazi
ng
Thic
knes
s
Type of GlazingNFRC Certified
Product #
Glass (mm)
Gap Fill
Performance Values1Shaded Areas Meet ENERGY STAR®
Performance Criteria in Zones Shown
Ext. Int.
U-F
acto
r
SHG
C
VLT
CR
U. S. Canada 2
Zone ER Zone
VENT N NC SC S 1 2 311/16" Clear IG PEL-N-177-01101-00001 2.5 2.5 air 0.45 0.60 0.63 44
with grilles-between-the-glass PEL-N-177-01102-00001 0.45 0.54 0.56 44
with integral grilles PEL-N-177-01103-00001 0.46 0.54 0.56 44
with grilles-between-the-glass PEL-N-177-01126-00001 0.33 0.48 0.54 55 26
with integral grilles PEL-N-177-01127-00001 0.33 0.48 0.54 55 26
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
Non Rectangular Unit thermal values will vary slightly.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Climate Zones
Architect Series® Traditional
W-HG-8Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
GLAZING PERFORMANCE - TOTAL UNIT
Aluminum-Clad Exterior
HurricaneShield® Impact-Resistant Glass
Gla
zing
Th
ickn
ess
Type of GlazingNFRC Certified
Product #
Glass (mm)
Gap Fill
Performance Values1Shaded Areas Meet ENERGY STAR®
Performance Criteria in Zones Shown
Ext. Int.
U-F
acto
r
SHG
C
VLT
CR
U. S. Canada 2
Zone ER Zone
HURRICANESHIELD® LAMINATED IMPACT-RESISTANT N NC SC S 1 2 313/16" Clear IG PEL-N-226-01193-00001 3 8 air 0.43 0.51 0.55 44
with grilles-between-the-glass PEL-N-226-01194-00001 0.44 0.45 0.45 44
with integral grilles PEL-N-226-01195-00001 0.43 0.45 0.45 44
with grilles-between-the-glass PEL-N-226-01190-00001 0.32 0.22 0.34 56
with integral grilles PEL-N-226-01191-00001 0.32 0.22 0.34 56
(1) Glazing performance values are calculated for Pine using NFRC 100, NFRC 200 and NFRC 500. Thermal performance of other wood species may vary. ENERGY STAR® values are updated to 2016 (Version 6) criteria.
(2) The values shown are based on Canada's updated ENERGY STAR® 2015 initiative.
See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines.
R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating
Climate Zones
Architect Series® Traditional
W-HG-9Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
HURRICANESHIELD® PRODUCTS WITH IMPACT-RESISTANT GLASS
7/8" Laminated Insulated Glass
Aluminum-Clad Exterior
Material
Design Pressure Large Missile Rating D Hallmark Certified
Florida Product Approval System
Minimum Maximum
PVB 1
Clad +50 / -50 +55 / -60 411-H-1478 FL17769
[55]
2 1/
8"
[46]
1 13
/16"
[33]
1 5/
16"
[89]
3 1/
2"
[31]
1 3/
16"
[39]
1 9/
16"
Installation FinOptional Fold-out
[32]1 1/4"
[56]2 3/16"
FRAME WIDTH
[57]2 1/4"
[57]
2 1/
4"
[96]3 13/16"
[47]1 13/16"
[47]1 7/8"
[57]
2 1/
4"
[57]2 1/4"
units with unequal sash.Dimension required for ordering
CH
EC
KR
AIL
HE
IGH
T
[149]5 7/8"
[92]
3 5/
8"
[33]
1 5/
16"
[116
]4
9/16
"
[96]3 13/16"
[32]
1 1/
4"
[32]1 1/4"
[47]1 13/16"
[47]1 7/8"
FRAME WIDTH
FRA
ME
HE
IGH
T
[149
]5
7/8"
UJ
LJ
CR
S
H
UPPER JAMBSUJ
LOWER JAMBSLJ
CHECK RAILCR
SILLS
HEADH
(1) All impact sizes and glass types are certified for wind zone 3, large missile rating D. Not approved for use in Miami-Dade County.
For a complete list of ratings, refer to the Coastal and High Winds section.
Clad Exterior - Wood Interior Putty and Ogee Glaze Grilles
7/8"
5/8" 1 1/4"7/8"
5/8" 1 1/4"
Wood Exterior - Wood Interior Putty and Ogee Glaze Grilles
7/8"
5/8" 1 1/4"7/8"
5/8" 1 1/4"
®Integral Light Technology
3/4"3/4"
Grilles-Between-the-GlassContoured Aluminum -
GBG3/4" Contoured
GBG3/4" Contoured
Architect Series® Traditional
W-HG-11Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
GRILLE TYPES
Typical Grille Patterns
For traditional patterns, see size tables.
Pella Architect Series single-hung windows are available in custom shapes shown below, and additional shapes per drawing. For specifications, size limitations, and details on these units, contact your local Pella sales representative.
Integral light technology® Grilles and Roomside Removable Grilles
PRAIRIE LITE PATTERNS
Standard corner lite dimension for Prairie patterns = 2-1/2" VG.
Available in transoms ≥ 1'3" height and width.
Available in all standard and special sizes.
OTHER AVAILABLE PATTERNS
VG = Visible Glass
Lite dimensions noted can vary.
For size and pattern availability contact your local Pella sales representative.
Grilles-Between-the-GlassPrairie
- Standard corner lite dimension for Prairie patterns = 2-1/2" VG.
- Available in transoms ≥ 1'3" height and width.
Cross
- Minimum DH frame height 35".
- Horizontal bar will be at 1/2" of the VG height of the top sash.
Top Row
- Minimum DH frame height 35".
- Horizontal bar will be at 1/2" of the VG height of the top sash.
CUSTOM SHAPES
Architect Series® Traditional
W-HG-12Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Double- and Single-Hung
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Pella Architect Series single-hung windows are available in shapes shown above, and additional custom shapes per drawing. For specifications, size limitations, and details on these units, contact your local Pella sales representative.
Springline Arch Head Partial Arch Head
Left Right
Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME ROUGH MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements.
Architect Series® Traditional
W-HG-13Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Double- and Single-Hung
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements.
Opening Dimensions
CLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME ROUGH MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Architect Series® Traditional
W-HG-14Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Double- and Single-Hung Fixed
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Grille patterns will align with companion hung window with equal sash split.
5-lite high grille patterns may be ordered in 5'5" fixed units to match cottage sash vent units.
Grilles are equally-divided on fixed units with odd-number lites high.
5959535947594159
4135
4141
4147
4153
4157
4165
4171
4735
4741
4747
4753
4757
4765
4771
5335
5341
5347
5353
5357
5365
5371
5935
5941
5947
5953
5957
5965
5971
Fixed Units
4"3 /
(1 4
99)
(1 5
18)
4' 1
1"
4' 1
1" 4/3
4"3 /
Frame
Opening "4/34"3/"4/34"3/ 4' 5
4' 5"
(1 365)(1 346) (1 499)
(1 518)
4' 11
4' 11"3' 11"
3' 11
(1 213)(1 194)(1 041)
(1 060)
3' 5"
3' 5
" 4/3" 4/3
4"3 /
4"3 /
" 4/3(1
803
)(1
822
)
5' 1
1"
5' 1
1
(1 6
51)
(1 6
70)
5' 5
"
5' 5
4' 9
4' 9
"
(1 4
67)
(1 4
48)
4' 5
4' 5
"
(1 3
65)
(1 3
46)
(1 0
41)
(1 0
60)
3' 5
"
3' 5
2' 1
1"
2' 1
1
(908
)(8
89)
(1 1
94)
(1 2
13)
3' 1
1"
3' 1
1
Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME ROUGH MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Architect Series® Traditional
W-HG-15Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Cottage Sash
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Cottage units have unequal sash split. Sash glass ratio is 40% upper sash to 60% Lower sash.
Vent variable units have unequal sash split. Sash glass ratio is determined by checkrail heights. See unit sections for dimension requirements.
6
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements.
Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME ROUGH MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Architect Series® Traditional
W-HG-16Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Replacement Double-Hung and Transoms
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements.
Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME ROUGH MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Architect Series® Traditional
W-HG-17Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Replacement Double-Hung
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements.
Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME ROUGH MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Architect Series® Traditional
W-HG-18Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Replacement Cottage
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
See Design Data pages in this section for clear opening dimensions.
Clear opening (egress) information does not take into consideration the addition of a Rolscreen (or any other accessory) to the product. You should consult your local building code to ensure products with Rolscreens meet egress requirements.
Opening DimensionsCLAD EXTERIOR UNITS: Dimensions shown in standard size tables are rough opening dimensions.
WOOD EXTERIOR UNITS: Use frame dimension plus dimensions below. This dimension includes the use of standard 1-1/8" wood subsill.
FRAME ROUGH MASONRY
Brickmould Width Height Width Height
STD + 3/4" +1-7/8" + 3-1/8" + 3-1/8"
3-1/2" + 3/4" +1-7/8" + 6-3/8" + 4-3/4"
For clad and wood units with HurricaneShield® impact-resistant glass, see the product installation instructions or refer to local building code requirements.
Architect Series® Traditional
W-HG-19Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
SIZE TABLES
Wood and Aluminum-Clad Exteriors
Replacement Fixed Units
Not to scale.
Traditional grille patterns shown. Refer to Grille Types section for additional patterns and profiles.
Architect Series® Traditional
W-HG-20Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
DESIGN DATA
Special sizes
Miscellaneous Formulas
(1) Available within size range shown.
(2) Per sash.
* Some units with custom glazing may have limited travel.
See your local Pella sales representative for specific size information.
VENT UNITS FIXED AND TRANSOM UNITS
VISIBLE GLASS
Width = Frame – 5-3/4"
Height 2 = (Frame – 8-3/16") / 2
Width = Frame – 5-3/4"
Height = Frame – 5-3/4"
ACTUAL GLASS
Width = Frame – 4-3/8"
Height 2 = (Frame – 5-1/2") / 2
Width = Frame – 4-3/8"
Height = Frame – 4-3/8"
CLEAR OPENING*
COW = Frame Width – 3-7/16"
COH = (Frame Height / 2) - 4-7/16"—
VENT AREA FT2 (COW x COH) / 144 —
Equal Sash Only
Special Size Frame Dimension 1SASH CONFIGURATION VENT-EQUAL COTTAGE FIXED
SASH GLASS RATIO TOP % : BOTTOM % 50 : 50 40 : 60 NA
(1) Maximum performance when glazed with the appropriate glass thickness.
To convert area to square meters (m²), multiply square feet by 0.0929.
Architect Series® Traditional
W-HG-30Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
DESIGN DATA
Wood and Aluminum-Clad Exteriors
Replacement Cottage Sash
Egress Notes:
Check all applicable local codes for emergency egress requirements.
E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2.
E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2.
VENT UNITS
Unit
Eg
ress Clear Opening Vent
Area Ft2
Visible Glass
Ft2
Standard Glass Thickness (mm)
Performance Class & Grade 1
Width (Inches)
Height (Inches)
Annealed Tempered Clad Wood
VG31.5 x 59.5 28-1/16 19-15/16 3.8 9.1 2.5 3 CW50 CW45VG31.5 x 61.5 28-1/16 20-3/4 4 9.5 2.5 3 CW50 CW45VG31.5 x 65.5 28-1/16 22-5/16 4.3 10.2 2.5 3 CW50 CW45VG31.5 x 71.5 28-1/16 24-3/4 4.8 11.3 2.5 3 CW40 CW40VG35.5 x 41.5 32-1/16 38324 2.8 6.8 2.5 3 CW50 CW45VG35.5 x 45.5 32-1/16 14-5/16 3.1 7.7 2.5 3 CW50 CW45VG35.5 x 47.5 32-1/16 15-1/8 3.3 8.1 2.5 3 CW50 CW45VG35.5 x 51.5 32-1/16 16-3/4 3.7 8.9 2.5 3 CW50 CW45VG35.5 x 53.5 32-1/16 17-1/2 3.9 9.3 2.5 3 CW50 CW45VG35.5 x 57.5 32-1/16 19-1/8 4.2 10.1 2.5 3 CW50 CW45VG35.5 x 59.5 32-1/16 19-15/16 4.4 10.5 2.5 3 CW50 CW45VG35.5 x 61.5 32-1/16 20-3/4 4.6 10.9 2.5 3 CW50 CW45VG35.5 x 65.5 32-1/16 22-5/16 4.9 11.8 2.5 3 CW50 CW45VG35.5 x 71.5 E1 32-1/16 24-3/4 5.5 13 2.5 3 CW40 CW40VG39.5 x 41.5 36-1/16 38324 3.1 7.7 2.5 3 CW50 CW45VG39.5 x 45.5 36-1/16 14-5/16 3.5 8.7 2.5 3 CW50 CW45VG39.5 x 47.5 36-1/16 15-1/8 3.7 9.2 2.5 3 CW50 CW45VG39.5 x 51.5 36-1/16 16-3/4 4.1 10.1 2.5 3 CW50 CW45VG39.5 x 53.5 36-1/16 17-1/2 4.3 10.6 2.5 3 CW50 CW45VG39.5 x 57.5 36-1/16 19-1/8 4.7 11.5 2.5 3 CW50 CW45VG39.5 x 59.5 36-1/16 19-15/16 4.9 12 2.5 3 CW50 CW45VG39.5 x 61.5 36-1/16 20-3/4 5.1 12.4 2.5 3 CW45 CW45VG39.5 x 65.5 36-1/16 22-5/16 5.5 13.4 2.5 3 CW45 CW45VG39.5 x 71.5 E 36-1/16 24-3/4 6.1 14.8 2.5 3 CW40 CW40VG41.5 x 41.5 38-1/16 38324 3.3 8.2 2.5 3 CW50 CW45VG41.5 x 45.5 38-1/16 14-5/16 3.7 9.2 2.5 3 CW50 CW45VG41.5 x 47.5 38-1/16 15-1/8 4 9.7 2.5 3 CW50 CW45VG41.5 x 51.5 38-1/16 16-3/4 4.4 10.7 2.5 3 CW50 CW45VG41.5 x 53.5 38-1/16 17-1/2 4.6 11.2 2.5 3 CW50 CW45VG41.5 x 57.5 38-1/16 19-1/8 5 12.2 2.5 3 CW50 CW45VG41.5 x 59.5 38-1/16 19-15/16 5.2 12.7 2.5 3 CW50 CW45VG41.5 x 61.5 38-1/16 20-3/4 5.4 13.2 2.5 3 CW45 CW45VG41.5 x 65.5 38-1/16 22-5/16 5.9 14.2 2.5 3 CW45 CW45VG41.5 x 71.5 E 38-1/16 24-3/4 6.5 15.6 2.5 3 CW40 CW40
(1) Maximum performance when glazed with the appropriate glass thickness.
To convert area to square meters (m²), multiply square feet by 0.0929.
Architect Series® Traditional
W-HG-31Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
DETAILED PRODUCT DESCRIPTIONS
Aluminum-Clad Exterior
LX and SE Double-, Single- and Simulated-Hung
(1) Contact your local Pella sales representative for current designs and color options.
(2) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and obscure insulated glass.
(3) Tan, Brown and Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with Tan or Brown exterior.
(4) Full screens are available on units ≤ 96" height.
(5) Appearance of exterior grille color will vary depending on Low-E coating on glass.
FRAME
• Select softwood, immersion treated with Pella’s EnduraGuard® wood protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Exterior surfaces are clad with aluminum. • Components are assembled with screws, staples and concealed corner
locks.• Overall frame depth is 5" (127mm) for a wall depth of 3-11/16" (94mm).• Optional factory applied jamb extensions available between 4-9/16"
(116mm) and 7-3/16" (183mm) wall depths.• Vinyl jamb liner [LX includes wood / clad inserts].• Optional factory installed fold-out installation fins with flexible fin corners.• Optional factory-applied EnduraClad® exterior trim.
SASH
• Select softwood, immersion treated with Pella’s EnduraGuard® wood protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Interior exposed surfaces are [LX: [clear pine] [mahogany] [douglas fir]] [SE: clear pine]. Any curved member may have visible finger-jointed surfaces.
• Exterior surfaces are clad with aluminum and sealed. • Corners mortised and tenoned, glued and secured with metal fasteners. • Sash thickness is 1-7/8" (47mm).• Sash exterior and interior profile is ogee.• Double-Hung: Upper sash has surface-mounted wash locks] [Single-Hung:
Fixed upper sash has surface-mounted wash locks] [Arch Head units have no wash locks].
• Lower sash has concealed wash locks in lower check rail.• Sashes tilt for easy cleaning.• Simulated-Hung units have non-operable upper and lower sashes.
WEATHERSTRIPPING
• Water-stop santoprene-wrapped foam at head and sill. • Thermoplastic elastomer bulb with slip-coating set into lower sash for tight
contact at check rail. • Vinyl-wrapped foam inserted into jamb liner to seal against sides of sash.
GLAZING SYSTEM
• Quality float glass complying with ASTM C 1036.• Custom and high altitude glazing available. • Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]]
[[clear] [[Advanced Low-E] [SunDefense™ Low-E] [AdvancedComfort] [NaturalSun Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon].
EXTERIOR
• Aluminum-clad exteriors shall be finished with EnduraClad® protective finish, in a multi-step, baked-on finish.
� Color is [standard] [custom]1.– or –
• Aluminum-clad exteriors shall be finished with EnduraClad Plus protective finish with 70% fluoropolymer resin in a multi-step, baked-on finish
� Color is [standard] [custom]1.
INTERIOR
• [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] [factory prefinished [paint] [stain] 1].
HARDWARE
• Galvanized block-and-tackle balances are connected to self-locking balance shoes which are connected to the sashes using zinc die cast terminals and concealed within the frame.
• Sash lock is [standard (cam-action)] [historic spoon-style] [air-conditioner lock] [simulated lock (Single-piece lock ties upper and lower sash together. When removed, lower sash becomes operable)]. Two sash locks on units with frame width 37" and greater.
• Optional sash lift furnished for field installation. Two lifts on units with frame width 37" and greater.
� Interior grilles are [5/8”] [7/8"] [1-1/4"] [2"] ogee profile that are solid [LX: [pine] [mahogany] [douglas fir]] [SE: pine]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 1].
� Exterior grilles are [5/8" putty glaze profile] [7/8" [putty glaze] [ogee] profile] [1-1/4" [putty glaze] [ogee] profile] [2" ogee profile] that are extruded aluminum.
� Patterns are [Traditional] [Prairie] [Top Row] [New England] [Victorian]. � Insulating glass contains non-glare spacer between the panes of glass. � Grilles are adhered to both sides of the insulating glass with VHB
acrylic adhesive tape and aligned with the non-glare spacer.– or –
• Grilles-Between-the-Glass 2
� Insulating glass contains 3/4" contoured aluminum grilles permanently installed between two panes of glass.
� Patterns are [Traditional] [9-Lite Prairie] [Cross] [Top Row] � Interior color is [White] [Black] [Tan 3] [Brown 3] [Putty 3] [Ivory]
[Brickstone] [Harvest] [Cordovan]. � Exterior color 5 is [standard]1.
– or –• Roomside Removable grilles
� [[3/4"] [1-1/4"] [2"] regular] [[1-1/4"] [2"] colonial] profile, with [Traditional] [Prairie] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks.
� Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 1].
� Exterior [unfinished, ready for site finishing] [factory primed] [finish color matched to exterior cladding 5].
Screens• InView™ screens
� [Half-Size] [Full-Size 4] black vinyl-coated 18/18 mesh fiberglass screen cloth complying with the performance requirements of SMA 1201, set in aluminum frame fitted to outside of window, supplied complete with all necessary hardware.
� Full screen spreader bar placed on units > 37" width or > 65" height. � Screen frame finish is baked enamel, color to match window cladding.
– or –• Vivid View® screens
� [Half-Size] [Full-Size 4] PVDF 21 / 17 mesh, minimum 78 percent light transmissive screen, set in aluminum frame fitted to outside of window, supplied complete with all necessary hardware.
� Full screen spreader bar placed on units > 37" width or > 65" height. � Screen frame finish is baked enamel, color to match window cladding.
Hardware• Optional factory applied limited opening device available for vent units in
stainless steel; nominal 3-3/4" opening. Limiting device concealed from view.
• Optional factory applied window opening control device available. Device allows window to open less than 4" with normal operation, with a release mechanism that allows the sash to open completely. Complies with ASTM F2090-10.
Rev. 04/04/2018
Architect Series® Traditional
W-HG-32Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
DETAILED PRODUCT DESCRIPTIONS
Wood Exterior
LX Double-, Single- and Simulated-Hung
(1) Contact your local Pella sales representative for current color options.
(2) Available on units glazed with Low-E insulated glass with argon, clear insulated glass and obscure insulated glass.
(3) Tan, Brown or Putty Interior GBG colors are available in single-tone (Brown/Brown, Tan/Tan or Putty/Putty). Other interior colors are also available with Tan or Brown exterior.
(4) Full screens are available on units ≤ 96" height.
(5) Appearance of exterior grille color will vary depending on Low-E coating on glass.
FRAME
• Select softwood, immersion treated with Pella’s EnduraGuard® wood protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Interior exposed surfaces are [clear pine] [mahogany] (standard rectangular windows only). Any curved member may have visible finger-jointed surfaces.
• Exterior surfaces are [pine] [mahogany]. • Overall frame depth is 4-3/8" (111mm) for a wall depth of 4-3/16"
(106mm).• Vinyl Jamb liner includes wood / clad inserts.• Optional factory applied jamb extensions available for 4-9/16"
(116mm) and 7-3/16" (183mm) wall depths, with Pella's standard wood exterior trim.
SASH
• Select softwood, immersion treated with Pella’s EnduraGuard® wood protection formula in accordance with WDMA I.S.-4. The EnduraGuard formula includes three active ingredients for protection against the effects of moisture, decay, stains from mold and mildew. Plus, an additional ingredient adds protection against termite damage.
• Interior exposed surfaces are [clear pine] [mahogany] (standard rectangular windows only). Any curved member may have visible finger-jointed surfaces.
• Exterior surfaces are [pine] [mahogany]. • Corners [mortised and tenoned on rectangular units] [mitered on arch head
units], glued and secured with metal fasteners. • Sash thickness is 1-7/8" (47mm).• Sash exterior profile is putty glaze, interior profile is ogee.• [Double-Hung: Upper sash has surface-mounted wash locks] [Single-Hung:
Fixed upper sash has surface-mounted wash locks] [Arch Head units have no wash locks].
• Lower sash has concealed wash locks in lower check rail.• Sashes tilt for easy cleaning.• Simulated-Hung units have non-operable upper and lower sashes.
WEATHERSTRIPPING
• Water-stop santoprene-wrapped foam at head and sill. • Thermoplastic elastomer bulb with slip coating set into Low-E sash for tight
contact at check rail. • Vinyl-wrapped foam inserted into jamb liner to seal against sides of sash.
GLAZING SYSTEM
• Quality float glass complying with ASTM C 1036.• Custom and high altitude glazing available. • Silicone-glazed 11/16" dual-seal insulating glass [[annealed] [tempered]]
[[clear] [[Advanced Low-E] [SunDefense™ Low-E] [AdvancedComfort Low-E] [NaturalSun Low-E] with argon]] [[bronze] [gray] [green] Advanced Low-E with argon].
EXTERIOR
• [Pine: factory primed with one coat acrylic latex] [Mahogany: [factory primed with one coat acrylic latex] [Unfinished, ready for site finishing]].
INTERIOR
• [Unfinished, ready for site finishing] [factory primed with one coat acrylic latex] [factory prefinished [paint] [stain] 1].
HARDWARE
• Galvanized block-and-tackle balances are connected to self-locking balance shoes which are connected to the sashes using zinc die cast terminals and concealed within the frame.
• Sash lock is [standard (cam-action)] [historic spoon-style] [air-conditioner lock] [simulated lock (Single-piece lock ties upper and lower sash together. When removed, lower sash becomes operable)]. Two sash locks on units with frame width 37" and greater.
• Optional sash lift furnished for field installation. Two lifts on units with frame width 37" and greater.
� Interior grilles are [5/8”] [7/8"] [1-1/4"] ogee profile that are solid [pine] [mahogany]. Interior surfaces are [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 1].
� Exterior grilles are solid [5/8"] [7/8"] [1-1/4"] putty glaze profile that are [pine] [mahogany]. Exterior surfaces are water repellent, preservative-treated in accordance with WDMA I.S.-4, and are [unfinished, ready for site finishing] [factory primed].
� Patterns are [Traditional] [Prairie] [Top Row] [New England] [Victorian]. � Insulating glass contains non-glare spacer between the panes of glass. � Grilles are adhered to both sides of the insulating glass with VHB
acrylic adhesive tape and aligned with the non-glare spacer.– or –
installed between two panes of glass. � Patterns are [Traditional] [Prairie] [Cross] [Top Row] � Interior color is [White] [Black] [Tan 3] [Brown 3] [Putty 3] [Ivory]
[Brickstone] [Harvest] [Cordovan]. � Exterior color 5 is [standard] 1.
– or –• Roomside Removable grilles
� [[3/4"] [1-1/4"] [2"] regular] [[1-1/4"] [2"] colonial] profile, with [Traditional] [Prairie] patterns that are removable solid pine wood bars steel-pinned at joints and fitted to sash with steel clips and tacks.
� Interior [unfinished, ready for site finishing] [factory primed] [pine: factory prefinished [paint] [stain] 1 ].
� Exterior [unfinished, ready for site finishing] [factory primed] [factory prefinished, finish color matched to exterior cladding 5].
Screens (for Double- and Single-Hung)• InView™ Screens
� [Half-Size] [Full-Size 4] black vinyl-coated 18/18 mesh fiberglass screen cloth complying with the performance requirements of SMA 1201, set in aluminum frame fitted to outside of window, supplied complete with all necessary hardware.
� Full screen spreader bar placed on units > 37" width or > 65" height. � Screen frame finish is [baked enamel, White] [feature 3].
– or –• Vivid View® Screens
� [Half-Size] [Full-Size 4] PVDF 21/17 mesh, minimum 78 percent light transmissive screen, set in aluminum frame fitted to outside of window, supplied complete with all necessary hardware.
� Full screen spreader bar placed on units > 37" width or > 65" height. � Screen frame finish is [baked enamel, White] [feature 3]. � Arch head units have half-size screen only.
Hardware• Optional factory applied limited opening device available for vent units in
stainless steel; nominal 3-3/4" opening. Limiting device concealed from view.
• Optional factory applied window opening control device available. Device allows window to open less than 4” with normal operation, with a release mechanism that allows the sash to open completely. Complies with ASTM F2090-10.
Rev. 04/04/2018
Architect Series® Traditional
W-HG-33Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
UNIT SECTIONS — WOOD COLLECTION
Aluminum-Clad Exterior
LX Double-Hung
Scale 3" = 1' 0"
HEAD
SILL
FIXED
HEAD
SILL
TRANSOM
JAMBSFIXED / TRANSOM
Solid Pine
or Douglas FirMahogany
LOWER SASHUPPER SASH
CHECKRAIL
VENT
SILL
HEAD
Architect Series® Traditional
W-HG-34Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
UNIT SECTIONS
Aluminum-Clad Exterior
LX Single- and Double-Hung
Scale 3" = 1' 0"
All dimensions are approximate.
[127]5"
FRA
ME
HE
IGH
T
[37]
1 7/
16"
[58]
2 1/
4"
[37]
1 7/
16"
[44]
1 3/
4"
[27]1 1/16"
FRAME WIDTH
[27]1 1/16"
[46]
1 13
/16"
FRAME WIDTH
[33]
1 5/
16"
[37]1 7/16"
[34]1 5/16"
[73]2 7/8"
[94]
3 11
/16"
[46]
1 13
/16"
[127
]5"
[73]2 7/8"
units with unequal sash.Dimension required for ordering
[37]1 7/16"
[106
]4
3/16
" [75]3"
[39]
1 9/
16"
CH
EC
KR
AIL
HE
IGH
T[46]1 13/16"
[46]1 13/16"
Installation FinOptional Fold-out
LUXURY EDITION
VS
VH
LJ
UJCR
UPPER JAMBSUJ
LOWER JAMBSLJ
VS VENT SILL
CHECK RAILCR
VH VENT HEAD
Architect Series® Traditional
W-HG-35Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
UNIT SECTIONS
Aluminum-Clad Exterior
SE Double-Hung
Scale 3" = 1' 0"
All dimensions are approximate.
units with unequal sash.Dimension required for ordering
CH
ECKR
AIL
HEI
GH
T
[37]1 7/16"
[27]1 1/16"
FRAME WIDTH
[46]
1 13
/16"
[127
]5"
[73]2 7/8"
[27]1 1/16"
[46]
1 13
/16"
FRAME WIDTH
[33]
1 5/
16"
[37]1 7/16"
[34]1 5/16"
[73]2 7/8"
[94]
3 11
/16"
Installation FinOptional Fold-out
[37]
1 7/
16"
[44]
1 3/
4"
[127]5"
FRAM
E H
EIG
HT
[37]
1 7/
16"
[58]
2 1/
4"[1
06]
4 3/
16" [75]3"
[39]
1 9/
16"
[46]1 13/16"
[46]1 13/16"
STANDARD EDITION
VS
VH
LJ
UJCR
UPPER JAMBSUJ
LOWER JAMBSLJ
VS VENT SILL
CHECK RAILCR
VH VENT HEAD
Architect Series® Traditional
W-HG-36Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
UNIT SECTIONS
Aluminum-Clad Exterior
LX and SE Fixed and Transoms
Scale 3" = 1' 0"
All dimensions are approximate.
See www.PellaADM.com for mullion limitations and reinforcing requirements.
TYPICAL JOINING MULLIONS
LX VENT / LX VENTVERTICAL JOINING MULLION
TRANSOM / VENTHORIZONTAL JOINING MULLION
LX VENT / FIXEDVERTICAL JOINING MULLION
[46]1 13/16"
[46]1 13/16"
[47]
1 7/
8"[7
4]2
15/1
6"[7
0]2
3/4"
FRA
ME
HE
IGH
T
[19]
3/4"
[47]
1 7/
8"[4
7]1
7/8"
[103
]4
1/16
" ShownCustom 3" Bottom Rail Fixed Double Hung
[70]
2 3/
4"
FRA
ME
HE
IGH
T
[19]
3/4"
[76]3"
[127]5"
[19]3/4"
[46]
1 13
/16"
[47]1 7/8"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[31]1 3/16"
[33]
1 5/
16"
[94]
3 11
/16"
[19]3/4"
[46]
1 13
/16"
[47]1 7/8"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[31]1 3/16"
[33]
1 5/
16"
[94]
3 11
/16"
Installation FinOptional Fold-out
Installation FinOptional Fold-out
TS
TJ
TH
FJ
FH
FS
FH FIXED HEAD
TRANSOM HEADTH
FJ FIXED JAMB
FS FIXED SILL
TRANSOM JAMBTJ
TRANSOM SILLTS
LX VENT / LX VENTVERTICAL JOINING MULLION
TRANSOM / VENTHORIZONTAL JOINING MULLION
LX VENT / FIXEDVERTICAL JOINING MULLION
[46]1 13/16"
[46]1 13/16"
[47]
1 7/
8"[7
4]2
15/1
6"[7
0]2
3/4"
FRA
ME
HE
IGH
T
[19]
3/4"
[47]
1 7/
8"[4
7]1
7/8"
[103
]4
1/16
" ShownCustom 3" Bottom Rail Fixed Double Hung
[70]
2 3/
4"
FRA
ME
HE
IGH
T
[19]
3/4"
[76]3"
[127]5"
[19]3/4"
[46]
1 13
/16"
[47]1 7/8"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[31]1 3/16"
[33]
1 5/
16"
[94]
3 11
/16"
[19]3/4"
[46]
1 13
/16"
[47]1 7/8"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[31]1 3/16"
[33]
1 5/
16"
[94]
3 11
/16"
Installation FinOptional Fold-out
Installation FinOptional Fold-out
TS
TJ
TH
FJ
FH
FS
FH FIXED HEAD
TRANSOM HEADTH
FJ FIXED JAMB
FS FIXED SILL
TRANSOM JAMBTJ
TRANSOM SILLTS
LX VENT / LX VENTVERTICAL JOINING MULLION
TRANSOM / VENTHORIZONTAL JOINING MULLION
LX VENT / FIXEDVERTICAL JOINING MULLION
[46]1 13/16"
[46]1 13/16"
[47]
1 7/
8"[7
4]2
15/1
6"[7
0]2
3/4"
FRA
ME
HE
IGH
T
[19]
3/4"
[47]
1 7/
8"[4
7]1
7/8"
[103
]4
1/16
" ShownCustom 3" Bottom Rail Fixed Double Hung
[70]
2 3/
4"
FRA
ME
HE
IGH
T
[19]
3/4"
[76]3"
[127]5"
[19]3/4"
[46]
1 13
/16"
[47]1 7/8"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[31]1 3/16"
[33]
1 5/
16"
[94]
3 11
/16"
[19]3/4"
[46]
1 13
/16"
[47]1 7/8"
[73]2 7/8"
FRAME WIDTH
[19]3/4"
[31]1 3/16"
[33]
1 5/
16"
[94]
3 11
/16"
Installation FinOptional Fold-out
Installation FinOptional Fold-out
TS
TJ
TH
FJ
FH
FS
FH FIXED HEAD
TRANSOM HEADTH
FJ FIXED JAMB
FS FIXED SILL
TRANSOM JAMBTJ
TRANSOM SILLTS
Architect Series® Traditional
W-HG-37Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
UNIT SECTIONS
Wood Exterior
LX Single- and Double-Hung
Scale 3" = 1' 0"
All dimensions are approximate.
units with unequal sash.Dimension required for ordering
CH
ECKR
AIL
HEI
GH
T
Shown1-1/8" Subsill #3544
1-78" Brickmould #3443
[17]11/16"
[46]1 13/16"
FRAME WIDTH
[48]
1 7/
8"
[89]
3 1/
2"
[29]1 1/8"
[89]
3 1/
2"
[29]1 1/8"
[29]1 1/8"
BRICKMOULD1-7/8"
BRICKMOULD3-1/2"
CASING3-1/2" FLAT
[30]
1 3/
16"
[71]
2 13
/16"
[72]
2 13
/16"
[47]
1 7/
8"
[138]5 7/16"
1-7/8" SUBSILLOPTIONAL
[138]5 7/16"
[28]
1 1/
8"
1-1/8" SUBSILLOPTIONAL
[46]
1 13
/16"
[46]
1 13
/16"
[106]4 3/16"
FRAME WIDTH
FRAM
E H
EIG
HT
[24]
15/1
6"[1
06]
4 3/
16"
[29]
1 1/
8"
[73]2 7/8"
[138]5 7/16"
[39]
1 9/
16"
[28]
1 1/
8"[1
06]
4 3/
16" [75]3"
[30]1 3/16"
[37]1 7/16"
[30]
1 3/
16"
[37]1 7/16"
[34]1 5/16"
[46]1 13/16"
[37]
1 7/
16"
[49]
1 15
/16"
[73]2 7/8"
[111
]4
3/8"
[44]
1 3/
4"[7
0]2
3/4"
[30]
1 3/
16"
VS
VH
LJ
UJCR
UPPER JAMBSUJ
LOWER JAMBSLJ
VS VENT SILL
CHECK RAILCR
VH VENT HEAD
Architect Series® Traditional
W-HG-38Pella 2018 Architectural Design Manual | Division 08 – Openings | Windows and Doors | www.PellaADM.com
HUNG
UNIT SECTIONS
Wood Exterior
Fixed and Transom - Putty Exterior Glazing Profile