Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
LEGEND
R.O.--ROUGH OPENING.
F.S.--FRAME SIZE.
D.L.O.--DAYLITE OPENING.
D.O.--DOOR OPENING.
REQ'D--REQUIRED.
OPP.--OPPOSITE.
R.H.--RIGHT HAND.
L.H.--LEFT HAND.
S.A.--SINGLE ACTING.
D.A.--DOUBLE ACTING.
STL.--STEEL.
ALUM.--ALUMINUM.
B.O.--BY OTHERS.
F.V.--FIELD VERIFY.
ANG.--ANGLE.
CHAN.--CHANNEL.
SHT.--SHEET.
DTL.--DETAIL.
ELEV.--ELEVATION.
I.G.--INSULATED GLASS.
LT.--LITE (OF GLASS).
O.B.--OUTBOARD.
I.B.--INBOARD.
AS.--AIR SPACE.
SURF.--SURFACE.
FLSHG.--FLASHING.
WDW.--WINDOW.
P.O.--PROJECT OUT.
P.I.--PROJECT IN.
HDWE.--HARDWARE.
EA.--EACH
FLR.--FLOOR.
DETAIL NUMBER.
SHEET WHERE THE
DETAIL APPEARS.
DOOR NUMBER.
GLASS TYPE (MAY BE A
NUMBER OR LETTER).
THIS OCCURS ONLY
ON ELEVATIONS.
NOTE DESIGNATION.
THIS WILL CONTAIN A
NUMBER. THIS OCCURS
ONLY ON DETAILS.
ELEVATION TYPE.
NUMBER OF THIS
ELEVATION REQUIRED.
SCALE OF THIS ELEVATION.
THIS MAY APPEAR AS ONE
REFERENCE TO ARCHITECT'S
ELEVATION. -- EQUALS
NO REFERENCE
CONFIGURATION OF A TYPICAL INSULATED
GLASS UNIT (I.G.)
OUTBOARD LITE
AIR SPACE
INBOARD LITE
#1 SURFACE
#2 SURFACE
#3 SURFACE
#4 SURFACE
EXT.--EXTERIOR.
INT.--INTERIOR.
TEMP. OR T.--TEMPERED.
SPAND.--SPANDREL.
INSUL.--INSULATION.
A.F.F.--ABOVE FINISHED FLOOR.
I.D.--INSIDE DIMENSION.
O.D.--OUTSIDE DIMENSION.
DEG.--DEGREES.
JT.--JOINT.
B.J.--BUTT JOINT.
C.L.--CENTERLINE.
T.O.H.--TOP OF HORIZONTAL.
B.O.H.--BOTTOM OF HORIZONTAL.
F.O.B.--FACE OF BRICK.
F.O.S.--FACE OF STOREFRONT.
?--ANSWER NEEDED FROM ARCHITECT,OR GENERAL CONTRACTOR.
G.C.--GENERAL CONTRACTOR.
ARCH.--ARCHITECT.
N.T.S.--NOT TO SCALE.
SIM.--SIMILAR.
VER.--VERIFY.
ANOD.--ANODIZED.
PTD.--PAINTED.
S.S.--STAINLESS STEEL.
P.H.--PILOT HOLE.
ELEVATION TYPE, THIS MAYBE A NUMBER OR A LETTER.
SHEET WHERE THE
ELEVATION APPEARS.
CLOUD INDICATES
AREA OF REVISION
AND TRIANGLE WITH
NUMBER INDICATES
REVISION NUMBER
1
WINDLOAD
CLIP ASS'Y
DEADLOAD
CLIP ASS'Y
WINDLOAD/
DEADLOAD
CLIP ASS'Y
SPLICE
JOINT
SYMBOLS USED
ON ELEVATIONS
FOR SPECIAL
ANCHOR
CONDITIONS.....
ARCH. SHT. REFERENCE
ARCH. DTL. REFERENCE
DETAIL NUMBER
-- EQUALS NO REFERENCE
FRAMING/DOOR SYSTEMS
8126 Foxdale Drive, Norfolk, Virginia 23518
DRAWINGS PREPARED BY..........
Website: www.accuratedrafting.com Email: [email protected]
Phone #: (757) 587-1898 Fax #: (757) 587-1897
ACCURATE DRAFTING, INC.
DETAILS: 1/2 SIZE (1/2" = 1")
ELEVATIONS: 1/4" = 1'-0"
SCALES:
DRAWN BY:
(UNLESS NOTED OTHERWISE AT THE
DATE:
INDIVIDUAL DRAWINGS)
AD_DRAWNBY_SHEET
E-MAIL:
MEEKS 06.08.06
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
1
GENERAL NOTES:1. FRAMING SYSTEMS USED ON THIS PROJECT....
YKK AP AMERICA
SERIES YCW 750 O.G., 2 1/2" X 7 1/2" AND 10", THERMALLY IMPROVED ALUMINUM
CURTAINWALL FRAMING FOR 1" GLASS
SERIES YES 45 TU, 2" X 4 1/2", THERMALLY BROKEN ALUMINUM STOREFRONT FRAMING FOR 1"
GLASS - CENTER GLAZING
2. DOOR TYPES USED ON THIS PROJECT....
YKK AP AMERICA
SERIES 50D WIDE STILE INSWING AND OUTSWING DOORS FOR 1/4" GLASS UNITS.
3. WINDOW SYSTEMS USED ON THIS PROJECT....
YKK AP AMERICA
SERIES YES SSG VENTS, PROJECT-OUT VENT UNITS FOR STOREFRONT FRAMING WITH 1" GLASS
UNITS
4. FINISH OF EXPOSED ALUMINUM:
YKK STANDARD 2-COAT KYNAR PAINTED FINISH. COLOR TO BE SELECTED FROM YKK COLOR
SELECTION CHARTS
COLOR: _________________________________________
5. MISCELLANEOUS ALUMINUM FLASHING AND/OR TRIM:
.040 ALUMINUM TRIM WHERE REQUIRED AS SHOWN IN DETAILS AND .125 ALUMINUM BRAKE
SHAPES AT CORNERS AND JAMBS OF ELEVATIONS "M" AND "N".
6. CAULKING:
EXTERIOR/PERIMETER: ONE PART POLYURETHANE SEALANT IN A MANUFACTURER'S STANDARD
COLOR. COLOR: ________________________________ INTERIOR/PERIMETER: FURNISHED AND INSTALLED BY OTHERS
BEDDING/SEALING: ONE PART POLYURETHANE OR BUTYL SEALANT IN ANY COLOR (SINCE IT IS
NOT VISIBLE)
REVISION # DATE BY
REVISIONS
ALL FASTENERS SHOWN ON THIS SHOP DRAWING ARE FOR REFERENCE ONLY. ACTUAL FASTENER TYPES AND SIZES
SHOULD BE BASED ON ACTUAL CONDITIONS AND/OR CONSTRUCTION MATERIALS FOUND ON SITE.
ALL PART NUMBERS SHOWN ON THIS SHOP DRAWING SHOULD BE VERIFIED PRIOR TO ORDERING MATERIALS.
ALL DIMENSIONS SHOWN ON THIS SHOP DRAWING SHOULD BE CHECKED/VERIFIED PRIOR TO THE ORDERING OF ANY
MATERIALS AND PRIOR TO THE FABRICATION AND INSTALLATION OF ANY MATERIALS.
ALL STEEL CLIP ASSY'S AND INTERNAL STEEL REINFORCING SHOWN ON THIS SHOP DRAWING ARE FOR REFERENCE
ONLY. ACTUAL STEEL SIZES AND THICKNESSES SHOULD BE DETERMINED BY OTHERS BASED ON THE ARCHITECT'S
WINDLOAD/DEADLOAD REQUIREMENTS OUTLINED IN THE SPECIFICATIONS.
FABRICATION AND INSTALLATION OF THE FRAMING AND GLASS SHOWN ON THIS SHOP DRAWING SHOULD BE
PERFORMED IN ACCORDANCE WITH INDUSTRY STANDARDS AND THE RESPECTIVE MANUFACTURER'S INSTRUCTIONS
AND GUIDELINES.
THESE DRAWINGS WERE PREPARED WITHOUT THE BENEFIT OF A FULL SET OF ARCHITECTURAL DRAWINGS. SOME
PERIMETER CONDITIONS MAY BE SHOWN AS UNKNOWN. THESE CONDITIONS SHOULD BE VERIFIED PRIOR TO
FABRICATION AND INSTALLATION FOR THEIR EFFECT ON THE WORK BEING PERFORMED.
THESE DRAWINGS WERE PREPARED WITHOUT THE BENEFIT OF STRUCTURAL DRAWINGS. THIS MAY AFFECT THE
LOCATION AND SIZING OF STEEL CLIP CONNECTIONS AND SPLICE JOINTS. THE STRUCTURAL LAYOUT IN THESE
AREAS SHOULD BE VERIFIED PRIOR TO FABRICATION AND INSTALLATION OF THE WORK.
ACCURATE DRAFTING, INC. DRAWING GUIDELINES
SH0P DRAWING DISCLAIMER: THIS DISCLAIMER APPLIES TO ACCURATE DRAFTING'S CUSTOMER AS WELL AS ANY
PARTY USING THESE DRAWINGS TO OBTAIN INFORMATION NEEDED TO ORDER, COORDINATE, FABRICATE AND
INSTALL MATERIALS FOR THIS PROJECT. THIS APPLIES ALSO TO TRADES OTHER THAN GLASS AND GLAZING.
**THIS SHOP DRAWING IS AN INTERPRETATION OF THE ARCHITECT'S DRAWINGS BY ACCURATE DRAFTING COMPANY.
THIS DRAWING WAS GENERATED FOR ACCURATE DRAFTING'S CUSTOMER. THE INTERPRETATION OF THE ARCHITECT'S
DRAWINGS IS AFFECTED BY THE INFORMATION GIVEN TO ACCURATE BY IT'S CUSTOMER AS WELL AS INDUSTRY
STANDARDS AND MANUFACTURER TECHNICAL INFORMATION. IN CASES WHERE ACCURATE IS NOT PROVIDED WITH
THE NECESSARY INFORMATION IT WILL BE ACCURATE'S DECISION WHETHER TO ASSUME, EXTRAPOLATE OR OMIT
THIS INFORMATION IN ORDER TO COMPLETE THE SHOP DRAWINGS. IT IS THE RESPONSIBILITY OF ACCURATE'S
CUSTOMER (OR THE END USER IF APPLICABLE) TO REVIEW THE SHOP DRAWINGS. REVIEW OF THE SHOP DRAWINGS
INCLUDES, BUT IS NOT LIMITED, TO THE FOLLOWING ITEMS: DIMENSIONS, QUANTITIES, HANDING OF DOORS/FRAMES,
COLORS, THICKNESSES, SAFETY GLASS, GLASS TYPES, COATING TYPES, COATING LOCATIONS, DOOR STILE
TYPES, FRAMING TYPES, HARDWARE, ALIGNMENT OF HORIZONTAL AND/OR VERTICAL FRAMING MEMBERS WITH
ARCHITECTURAL ACCENTS/TRIM. ACCURATE DRAFTING NOR IT'S DRAFTSMAN SHALL BE LIABLE OR RESPONSIBLE
FINANCIALLY FOR ANY ERRORS AND/OR OMISSIONS FROM THESE SHOP DRAWINGS. ARCHITECTURAL AND/OR
CONTRACTOR APPROVAL DOES NOT RELEIVE ACCURATE'S CUSTOMER FROM REVIEWING THESE DRAWINGS AS NOTED
ABOVE.**
NOTE: IN CASES WHERE NO ARCHITECTURAL DRAWINGS WERE PROVIDED TO ACCURATE THE SAME DISCLAIMER
ITEMS NOTED ABOVE STILL APPLY TO WHATEVER INFORMATION WAS PROVIDED TO ACCURATE TO PERFORM
THE SHOP DRAWINGS.
YES SSG PROJECT OUT VENTS:
EACH OPERABLE VENT TO RECEIVE:
(1) SET OF STANDARD WEATHERSTRIPPING
(1) SET 4-BAR STEEL ANDERBERG HINGES
(2) EACH CAM HANDLE LOCKS
YKK WINDOW ACCESSORIES/FEATURES:
--OVERALL FRAME DEPTH WILL BE 2 7/8"
--SASH AND FRAME CORNER CONSTRUCTION WILL BE EPOXY,
AND SCREW SPLINE.
--GLAZING MATERIALS FOR 1" INFILL THICKNESS.
WINDOW HARDWARE:
DOOR
NUMBER
QTY PAIR OR
SINGLE
RIGHT OR
LEFT HAND
DOOR OPENING (D.O.)
SIZE, WIDTH X HEIGHT
HARDWARE
SET
GLASS TYPE
IN DOOR
NOTES AND
COMMENTS
DOOR SCHEDULE
A-104A 1 RH 36" X 84" 9 C SEE ELEVATION "G"SINGLE
STILE
DOOR
WIDE
A-105A SINGLE1 WIDE LH 36" X 84" 9
B-105B
B-106B
1
1 WIDE
WIDE
SINGLE
SINGLE
36" X 84"
36" X 84"
SEE ELEVATION "G"
SEE ELEVATION "G"9
9
C
C
RH
LH
C-105B
C-106B
1
1 WIDE
WIDE
SINGLE
SINGLE 36" X 84"
36" X 84"
SEE ELEVATION "G"
SEE ELEVATION "G"
9 C
9 C
RH
LH
E-101RH
E-101ARH
E-103RH
E-103ARH
E-108RH
E-126RH
1
1
1
1
1
1
WIDE
WIDE
WIDE
WIDE
WIDE
WIDE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
SINGLE
RH
RH
RH
RH
RH
RH
36" X 84"
36" X 84"
36" X 84"
36" X 84"
36" X 84"
36" X 84"
21
21
22
25
23
25
D
D
C
D
C
D SEE ELEVATION "L"
SEE ELEVATION "L"
SEE ELEVATION "H"
SEE ELEVATION "H"
SEE ELEVATION "I"
SEE ELEVATION "I"
F-105A
F-104A
1
1
WIDE
WIDE
SINGLE
SINGLE
RH
LH
36" X 84"
36" X 84" 9
9 C
C
SEE ELEVATION "G"
SEE ELEVATION "G"
G-105A 1
G-104A 1 SINGLE
SINGLEWIDE
WIDE
RH 36" X 84"
LH 36" X 84" SEE ELEVATION "G"
SEE ELEVATION "G"C2
2 C
H-105A
H-104A
1
1
SINGLE
SINGLE
WIDE
WIDE
RH
LH
36" X 84"
36" X 84"
SEE ELEVATION "G"
SEE ELEVATION "G"
2
2
C
C
SEE ELEVATION "G"C
36" X 84"E-101LH SINGLEWIDE1 LH SEE ELEVATION "I"21 D
36" X 84"E-101ALH SINGLEWIDE1 LH SEE ELEVATION "I"21 D
36" X 84"E-103LH SINGLEWIDE1 LH SEE ELEVATION "H"22 C
E-103ALH 36" X 84"SINGLEWIDE1 LH SEE ELEVATION "H"23 C
36" X 84"
36" X 84"E-126LH
E-108LH SINGLE
SINGLE
WIDE
WIDE1
1
LH
LH
SEE ELEVATION "L"
SEE ELEVATION "L"
25
25
D
D
GLASS TYPESARCHITECT'S GLASS REFERENCES
1/4" CLEAR, TEMPERED GLASS
AD_GTYPEATE_XXD
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
NONE
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX1/4" SOLEXIA, TEMPERED GLASS
AD_GTYPEATE_XXC
AD_GTYPEATE_XXA
1" SOLEXIA, TEMPERED/TEMPERED
INSULATED GLASS UNIT CONSISTING OF....
1/4" SOLEXIA, TEMPERED O.B. LITE
1/2" AIR SPACE
1/4" CLEAR, TEMPERED I.B. LITE
1" SOLEXIA, TEMPERED/TEMPERED
INSULATED SPANDREL GLASS UNIT
CONSISTING OF....
1/4" SOLEXIA, TEMPERED O.B. LITE
1/2" AIR SPACE
1/4" CLEAR, TEMPERED I.B. LITE
W/CERAMIC SPANDREL FRIT ON THE #4
SURFACE OF THE I.G. UNIT IN A
MANUFACTURER'S STANDARD COLOR (T.B.D.)
COLOR: _________________
AD_GTYPEATE_XXB
NONE
NONE
NONE
AREA FOR ARCHITECT/G.C.
APPROVAL STAMPS AND
COMMENTS
JOB: NEW SOUTH BOSTON ELEMENTARY
SCHOOL, HALIFAX COUNTY, VIRGINIA
G.C. BLAIR CONSTRUCTION INC., GRETNA,
VIRGINIA
ARCHITECT: DEWBERRY AND DAVIS INC.
ARCHITECTS, DANVILLE, VIRGINIA
GLAZING SUBCONTRACTOR: APPOMATTOX
GLASS AND STOREFRONT, INC.,
APPOMATTOX, VIRGINIA
THERE ARE A TOTAL
OF (23) SHEETS IN
THIS SET OF SHOP
DRAWINGS
APPOMATTOX, VIRGINIA 24522
PHONE: 1.434.352.7109
FAX: 1.434.352.7725
APPOMATTOX GLASS & STOREFRONT, INC.
DRAWINGS PREPARED FOR.....
23 EAST HARRELL STREET
DOOR HARDWARE:**HARDWARE SET #2: EACH SINGLE DOOR LEAF SHALL RECEIVE THE FOLLOWING...
(3) EACH BALL BEARING BUTT HINGES (STANLEY FBB191 4.5X4.5X626)
(1) EACH OVERHEAD/SURFACE MOUNTED DOOR CLOSER ASS'Y (LCN 4111S-H-CNS)
(1) EACH ENTRANCE LOCKSET/LATCH HANDLE ASS'Y (YALE SECURITY ML2051 LSR)
(1) EACH 1/2" X 5", MILL FINISH, ALUMINUM THRESHOLD (NATIONAL GUARD 425)
(1) EACH BOTTOM RAIL MOUNTED WEATHERSTRIP ASS'Y (YKK STANDARD)
(1) SET OF DOOR FRAME WEATHERSTRIPPING AT THE HEAD AND JAMBS ONLY (YKK STANDARD)
(1) SET OF SNAP ON GLAZING BEADS FOR 1/4" GLASS (YKK STANDARD)
***NOTE: ALL HARDWARE LISTED AT THESE SCHEDULES IS FURNISHED/FURNISHED AND
INSTALLED BY OTHERS EXCEPT AS NOTED BELOW....
--DOOR FRAME WEATHERSTRIPPING IS FURNISHED AND INSTALLED BY YKK AS PART OF
THE YKK DOOR FRAMING
--SNAP ON GLAZING BEADS FOR YKK DOORS ARE FURNISHED BY YKK AND INSTALLED
BY APPOMATTOX GLASS
FOR HARDWARE FURNISHED/FURNISHED AND INSTALLED BY OTHERS....
IT IS THE RESPONSIBILITY OF THE HARDWARE SUPPLIER(S) TO DETERMINE IF THE
HARDWARE BEING FURNISHED/FURNISHED AND INSTALLED IS COMPATIBLE WITH THE
DOORS AND DOOR FRAMING SHOWN ON THIS SHOP DRAWING. ALL HARDWARE (INCLUDING
TEMPLATES, MOUNTING LOCATIONS AND SCHEDULES) MUST BE DELIVERED TO YKK FOR
FABRICATION INTO THE ALUMINUM DOORS AND DOOR FRAMING. PLEASE MAKE ONLY ONE
(1) COMPLETE SHIPMENT.
**IMPORTANT HARDWARE SUPPLIER NOTES:
--ALL HARDWARE SCHEDULES ARE LISTED AS THEY APPEAR IN SPECIFICATION SECTION
08710.
--HARDWARE PACKAGES MAY OR MAY NOT BE COMPLETE AS SPECIFIED (I.E. MISSING
PULL HANDLES OR CYLINDERS). HARDWARE SUPPLIER PLEASE VERIFY.
DOOR HARDWARE NOTES:
**HARDWARE SET #21: EACH SINGLE DOOR LEAF SHALL RECEIVE THE FOLLOWING...
(3) EACH BALL BEARING BUTT HINGES (STANLEY FBB191 4.5X4.5X626)
(1) EACH OVERHEAD/SURFACE MOUNTED DOOR CLOSER ASS'Y (LCN 4111S-H-CNS)
(1) SET OF PUSH/PULL HARDWARE CONSISTING OF....
(1) EACH EXTERIOR MOUNTED PULL PLATE (IVES 8302-8)
(1) EACH INTERIOR MOUNTED PUSH PLATE (IVES 8200)
(1) SET OF DOOR FRAME WEATHERSTRIPPING AT THE HEAD AND JAMBS ONLY (YKK STANDARD)
(1) SET OF SNAP ON GLAZING BEADS FOR 1/4" GLASS (YKK STANDARD)
**HARDWARE SET #9: EACH SINGLE DOOR LEAF SHALL RECEIVE THE FOLLOWING...
(3) EACH BALL BEARING BUTT HINGES (STANLEY FBB191 4.5X4.5X626)
(1) EACH OVERHEAD/SURFACE MOUNTED DOOR CLOSER ASS'Y (LCN 4111S-H-CNS)
(1) EACH ENTRANCE LOCKSET/LATCH HANDLE ASS'Y (YALE SECURITY ML2051 LSR)
(1) EACH 1/2" X 5", MILL FINISH, ALUMINUM THRESHOLD (NATIONAL GUARD 425)
(1) EACH BOTTOM RAIL MOUNTED WEATHERSTRIP ASS'Y (YKK STANDARD)
(1) SET OF DOOR FRAME WEATHERSTRIPPING AT THE HEAD AND JAMBS ONLY (YKK STANDARD)
(1) SET OF SNAP ON GLAZING BEADS FOR 1/4" GLASS (YKK STANDARD)
**HARDWARE SET #22: EACH SINGLE DOOR LEAF SHALL RECEIVE THE FOLLOWING...
(3) EACH BALL BEARING BUTT HINGES (STANLEY FBB191 4.5X4.5X626)
(1) EACH OVERHEAD/SURFACE MOUNTED DOOR CLOSER ASS'Y (LCN 4111S-H-CNS)
(1) EACH EXTERIOR KEYED RIM CYLINDER--NOT MASTERKEYED OR KEYED ALIKE (VERIFY
MANUFACTURER NAME/MODEL #)
(1) EACH INTERIOR THUMBTURN LOCK CYLINDER (VERIFY MANUFACTURER NAME/MODEL #)
(1) EACH RIM EXIT DEVICE ASS'Y (VON DUPRIN CD98L 03)
(1) EACH ELECTRIC STRIKE ASS'Y (VON DUPRIN 6000 SERIES)
(1) EACH UNIVERSAL CONTROLLER (MICRO CONTROL SYSTEMS CT500)
(1) EACH ACCESS CREDENTIAL READER (MICRO CONTROL SYSTEMS CR90)
(1) EACH 1/2" X 5", MILL FINISH, ALUMINUM THRESHOLD (NATIONAL GUARD 425)
(1) EACH BOTTOM RAIL MOUNTED WEATHERSTRIP ASS'Y (YKK STANDARD)
(1) SET OF DOOR FRAME WEATHERSTRIPPING AT THE HEAD AND JAMBS ONLY (YKK STANDARD)
(1) SET OF SNAP ON GLAZING BEADS FOR 1/4" GLASS (YKK STANDARD)
**HARDWARE SET #23: EACH SINGLE DOOR LEAF SHALL RECEIVE THE FOLLOWING...
(3) EACH BALL BEARING BUTT HINGES (STANLEY FBB191 4.5X4.5X626)
(1) EACH OVERHEAD/SURFACE MOUNTED DOOR CLOSER ASS'Y (LCN 4111S-H-CNS)
(1) EACH EXTERIOR KEYED RIM CYLINDER--NOT MASTERKEYED OR KEYED ALIKE (VERIFY
MANUFACTURER NAME/MODEL #)
(1) EACH INTERIOR THUMBTURN LOCK CYLINDER (VERIFY MANUFACTURER NAME/MODEL #)
(1) EACH RIM EXIT DEVICE ASS'Y (VON DUPRIN CD98L 03)
(1) EACH 1/2" X 5", MILL FINISH, ALUMINUM THRESHOLD (NATIONAL GUARD 425)
(1) EACH BOTTOM RAIL MOUNTED WEATHERSTRIP ASS'Y (YKK STANDARD)
(1) SET OF DOOR FRAME WEATHERSTRIPPING AT THE HEAD AND JAMBS ONLY (YKK STANDARD)
(1) SET OF SNAP ON GLAZING BEADS FOR 1/4" GLASS (YKK STANDARD)
**HARDWARE SET #25: EACH SINGLE DOOR LEAF SHALL RECEIVE THE FOLLOWING...
(3) EACH BALL BEARING BUTT HINGES (STANLEY FBB191 4.5X4.5X626)
(1) EACH OVERHEAD/SURFACE MOUNTED DOOR CLOSER ASS'Y (LCN 4111S-H-CNS)
(1) EACH ENTRANCE LOCKSET/LATCH HANDLE ASS'Y (YALE SECURITY ML2051 LSR)
(1) SET OF DOOR FRAME WEATHERSTRIPPING AT THE HEAD AND JAMBS ONLY (YKK STANDARD)
(1) SET OF SNAP ON GLAZING BEADS FOR 1/4" GLASS (YKK STANDARD)
ELEVATION SCHEDULE
AREA 'A'
(0)
16
2
(0)
(0)
(0)
(0)
LOWER LEVEL
1
18
2
8
12
4
75A
B
A-1
C
E
D
F
ELEVATION
TYPE: TYPE:
FRAMINGTOTAL:
1G 6
(0)H 1
(0)I 1
(0)J 2
(0)K 1
(0)L 2
(0)M 2
(0)N 2
AREA 'B'
(0)
(0)
(0)
(0)
(0)
1
(0)
(0)
(0)
12
(0)
2
(0)
(0)
(0)
AREA 'C'
(0)
(0)
(0)
(0)
(0)
1
(0)
(0)
(0)
12
(0)
2
(0)
(0)
(0)
AREA 'D'
(0)
(0)
(0)
1
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
AREA 'E'
2
2
2
(0)
1
(0)
1
1
2
7
(0)
(0)
(0)
2
(0)
(0)
(0)
(0)
(0)
(0)
(0)
1
(0)
(0)
(0)
(0)
(0)
2
(0)
16
AREA 'F'
(0)
(0)
(0)
(0)
(0)
(0)
1
(0)
(0)
(0)
(0)
(0)
2
(0)
6
AREA 'G'
(0)
(0)
(0)
(0)
(0)
(0)
1
(0)
(0)
(0)
(0)
(0)
2
(0)
6
AREA 'H'
UPPER LEVEL
AREA 'D' AREA 'E'
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
18
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
(0)
8
4
(0)
(0)
E.1 (0) (0) (0) (0) 2 (0) (0) (0) (0) 2(0)
G.1 1 1 1 (0) (0) 1 1 1 (0) 6(0)
YCW 750 OG
2 12" X 6"
YES 45TU
2" X 4 12"
YES 45TU
2" X 4 12"
YES 45TU
2" X 4 12"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
YCW 750 OG
2 12" X 6"
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
1A
THESE SHOP DRAWINGS WERE CREATED UTILIZING THE FOLLOWING CONTRACT DOCUMENTS:
ARCHITECTURAL DRAWINGS...
LATEST REVISION DATED 01.27.2006
SET INCLUDES THE FOLLOWING SHEETS:
COVER SHEETS, SITE AND DEMOLITION PLANS, AND LIFE SAFETY PLANS, A1.1 THRU A1.10,
A2.1 THRU A2.4, A3.1 THRU A3.5, A4.1 THRU A4.16, A5.1 THRU A5.9, A6.1, A6.2, A7.1 THRU
A7.4
STRUCTURAL DRAWINGS...
LATEST REVISION DATED 01.27.2006
SET INCLUDES THE FOLLOWING SHEETS:
S0.1, S1.1 THRU S1.10, S2.1 THRU S2.10, S3.1, S4.1 THRU S4.4
SPECIFICATION SECTIONS...
SPEC BOOK DATED JANUARY, 2006 - VOLUME 1
ADDENDUMS...
ADD#1 - 02.21.2006
ADD#2 - 02.24.2006
ADD#3 - 03.01.2006
ADD#4 - 03.02.2006
AD_XREFKP_SHEET
SBE-KP.DWG
NOT USED 400
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
2AD_ELSYM_SOUTH
A-1
6
AD_ELSYM_SOUTH
A-1
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_WESTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
G
7
AD_ELSYM_WESTA
6
AD_ELSYM_WESTA-1
6
AD_ELSYM_WESTA-1
6
AD_ELSYM_NORTHA
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_WESTA
6
AD_ELSYM_WESTA
6
AD_ELSYM_WESTG
7
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA-1
6
AD_ELSYM_NORTHA-1
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTG
7
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
SOUTH BOSTON ELEMENTARY
PARTIAL KEY FLOOR PLAN
LOWER LEVEL AREAS: A, B, C
NOT TO SCALE
AREA 'A'
AREA 'B'
AREA 'C'
AD_ELSYM_WESTA
6
F
HG
E
D
AB
C
AD_DNUMB_XX
A-104A
AD_DNUMB_XX
A-105A
AD_DNUMB_XX
B-105B
AD_DNUMB_XX
B-106B
AD_DNUMB_XX
C-106B
AD_DNUMB_XX
C-105B
NORTH
NORTH
AD_ELSYM_SOUTH
A
6
AD_ELSYM_EASTA
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_WESTA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_WESTA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_EASTG.1
8
@ GROUND
ABOVE
CEILING
ABOVE
CEILING
@ GROUND
ABOVE
CEILING
@ GROUND
AD_ELSYM_SOUTH
G.1
8
AD_ELSYM_WESTG.1
8
AD_XREFKP_SHEET
SBE-KP.DWG
NOT USED 400
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
3
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
E.1
7
AD_ELSYM_SOUTH
E.1
7
AD_ELSYM_EASTA
6
AD_ELSYM_EASTE
7
AD_ELSYM_EASTE
7
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_SOUTH
J
10
AD_ELSYM_EASTJ
10
AREA 'D'
AREA 'E'
AD_ELSYM_NEL
11
AD_ELSYM_SWL
11
AD_ELSYM_SEH
9
AD_ELSYM_NEN
12
AD_ELSYM_SEM
12
F
B A
CE
D
HG
AD_DNUMB_XX
E-101ARH
AD_DNUMB_XX
E-103ARH
AD_ELSYM_SEI
10
NORTH
SOUTH BOSTON ELEMENTARY
PARTIAL KEY FLOOR PLAN
LOWER LEVEL AREAS: D & E
NOT TO SCALENORTH
AD_ELSYM_NWF
7
AD_ELSYM_SOUTH
A
6 AD_ELSYM_SWM
12
AD_ELSYM_WESTA
6
AD_ELSYM_SOUTH
N
12
AD_DNUMB_XX
E-108RH
AD_DNUMB_XX
E-108LH
AD_DNUMB_XX
E-126LH
AD_DNUMB_XX
E-126RH
AD_ELSYM_NWK
11
AD_DNUMB_XX
E-101ALH
AD_DNUMB_XX
E-101RH
AD_DNUMB_XX
E-101LH
AD_DNUMB_XX
E-103ALH
AD_DNUMB_XX
E-103RH
AD_DNUMB_XX
E-103LH
AD_XREFKP_SHEET
SBE-KP.DWG
NOT USED 400
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
4
AD_ELSYM_WESTA-1
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_NORTHA
6
AD_ELSYM_EASTA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_WESTA
6
AD_ELSYM_WESTA
6
AD_ELSYM_WESTA-1
6
AD_ELSYM_EASTA-1
6
AD_ELSYM_EASTA-1
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_SOUTH
G
7
AD_ELSYM_EASTA
6
AD_ELSYM_WESTA
6
AD_ELSYM_NORTHA-1
6
AD_ELSYM_NORTHG
7
AD_ELSYM_NORTHA-1
6
AD_ELSYM_NORTHA
6
AD_ELSYM_NORTHA
6AD_ELSYM_NORTHA
6
AREA 'F'
AREA 'G'
AREA 'H'
B A
CE
D
HG
F
AD_DNUMB_XX
F-105A
AD_DNUMB_XX
F-104A
AD_DNUMB_XX
H-104A
AD_DNUMB_XX
H-105A
AD_DNUMB_XX
G-104A
AD_DNUMB_XX
G-105A
AD_ELSYM_EASTG
7
NORTH
SOUTH BOSTON ELEMENTARY
PARTIAL KEY FLOOR PLAN
LOWER LEVEL AREAS: F, G, H
NOT TO SCALENORTH
AD_ELSYM_EASTA
6
AD_ELSYM_NORTHA
6
AD_ELSYM_EASTA
6
AD_ELSYM_EASTA
6
AD_ELSYM_WESTA
6
AD_ELSYM_SOUTH
A
6
AD_ELSYM_NORTHA
6
ABOVE
CEILING
@ GROUNDAD_ELSYM_NORTHG.1
8
ABOVE
CEILING
@ GROUND
AD_ELSYM_EASTG.1
8
ABOVE
CEILING
@ GROUNDAD_ELSYM_SOUTH
G.1
8
AD_XREFKP_SHEET
SBE-KP.DWG
NOT USED 400
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
5
UPPER LEVEL
AREA 'D'
UPPER LEVEL
AREA 'E'
LOBBY
BELOW
GYM
BELOW
DINING
BELOW
AD_ELSYM_WESTC
6
AD_ELSYM_SOUTH
B
6
AD_ELSYM_SWC
6
AD_ELSYM_NEC
6
AD_ELSYM_NORTHC
6
AD_ELSYM_EASTB
6
AD_ELSYM_SEB
6
AD_ELSYM_NWC
6
AD_ELSYM_NEC
6
AD_ELSYM_SWC
6
AD_ELSYM_NWC
6
AD_ELSYM_SEB
6
AD_ELSYM_SED
6
AD_ELSYM_SED
6
AD_ELSYM_SED
6
AD_ELSYM_SED
6
AD_ELSYM_SED
6
AD_ELSYM_SED
6
AD_ELSYM_NWD
6
AD_ELSYM_NWD
6
AD_ELSYM_NWD
6
AD_ELSYM_NWD
6
AD_ELSYM_NWD
6
AD_ELSYM_NWD
6
AD_ELSYM_NED
6
AD_ELSYM_NED
6
AD_ELSYM_NED
6
AD_ELSYM_SWD
6
AD_ELSYM_SWD
6
AD_ELSYM_SWD
6
NORTH
B
CE
D
A
H
F
G
SOUTH BOSTON ELEMENTARY
PARTIAL KEY FLOOR PLAN
UPPER LEVEL AREAS: D & E
NOT TO SCALENORTH
VERIFY ALL DIMENSIONS
AD_XREFEL_SHEET
SBE-EA.DWG
A 48
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
6
AD_XREFEL_SHEET
SBE-EA-1.DWG
A-1 48
AD_XREFEL_SHEET
SBE-EB.DWG
B 48
AD_XREFEL_SHEET
SBE-EC.DWG
C 48
AD_XREFEL_SHEET
SBE-ED.DWG
D 48
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE:SCALE:
SCALE:
SCALE:
SCALE:
FRAMING TYPE:FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:FINISH:
FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEVAD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AA
A
A
A
7575
75
75
75
1/4" = 1'-0"1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
45TU, 2" X 4 1/2"45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
NONENONE
NONE
NONE
NONE
A/A4.4A/A4.4
A/A4.4
A/A4.4
A/A4.4
PAINTEDPAINTED
PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISEELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XXAD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AA
A
A
A
72" R.O.72" R.O.
72" R.O.
72" R.O.
72" R.O.
72" R
.O.
72" R
.O.
72" R
.O.
72" R
.O.
72" R
.O.
71 1/4" F.S.71 1/4" F.S.
71 1/4" F.S.
71 1/4" F.S.
71 1/4" F.S.
71" F
.S.
71" F
.S.
71" F
.S.
71" F
.S.
71" F
.S.
3/8 "3/8 "
3/8 "
3/8 "
3/8 "
3/8 "3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
5/8 "
5/8 "
5/8 "
5/8 "
5/8 "
32 1/2" D.L.O.32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
. 32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
. 32 5/8" D
.L.O
.
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
32"
32"
32"
32"
32"
R.O.R.O.
R.O.
R.O.
R.O.
FINISH FLOORFINISH FLOOR
FINISH FLOOR
FINISH FLOOR
FINISH FLOOR
AD_DTBATE_WESTAD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
44
4
4
4
1313
13
13
13
AD_DTBATE_SOUTHAD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
33
3
3
3
1313
13
13
13
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
55
5
5
5
1313
13
13
13
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
11
1
1
1
1313
13
13
13
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
22
2
2
2
1313
13
13
13
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
44
4
4
4
1313
13
13
13
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
66
6
6
6
1313
13
13
13
AD_DTBATE_WESTAD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
66
6
6
6
1313
13
13
13
AD_DTBATE_SOUTHAD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
77
7
7
7
1414
14
14
14
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE:SCALE:
SCALE:
SCALE:
SCALE:
FRAMING TYPE:FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:FINISH:
FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEVAD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
A-1A-1
A-1
A-1
A-1
1212
12
12
12
1/4" = 1'-0"1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
45TU, 2" X 4 1/2"45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
NONENONE
NONE
NONE
NONE
A-1/A4.4A-1/A4.4
A-1/A4.4
A-1/A4.4
A-1/A4.4
PAINTEDPAINTED
PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISEELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XXAD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
BB
B
B
B
72" R.O.72" R.O.
72" R.O.
72" R.O.
72" R.O.
72" R
.O.
72" R
.O.
72" R
.O.
72" R
.O.
72" R
.O.
71 1/4" F.S.71 1/4" F.S.
71 1/4" F.S.
71 1/4" F.S.
71 1/4" F.S.
71" F
.S.
71" F
.S.
71" F
.S.
71" F
.S.
71" F
.S.
3/8 "3/8 "
3/8 "
3/8 "
3/8 "
3/8 "3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
5/8 "
5/8 "
5/8 "
5/8 "
5/8 "
32 1/2" D.L.O.32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
32 1/2" D.L.O.
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
. 32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
. 32 5/8" D
.L.O
.
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
32"
32"
32"
32"
32"
R.O.R.O.
R.O.
R.O.
R.O.
FINISH FLOORFINISH FLOOR
FINISH FLOOR
FINISH FLOOR
FINISH FLOOR
AD_DTBATE_WESTAD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
1111
11
11
11
1414
14
14
14
AD_DTBATE_SOUTHAD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
1010
10
10
10
1414
14
14
14
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
1212
12
12
12
1414
14
14
14
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
88
8
8
8
1414
14
14
14
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
99
9
9
9
1414
14
14
14
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
1111
11
11
11
1414
14
14
14
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE:SCALE:
SCALE:
SCALE:
SCALE:
FRAMING TYPE:FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:FINISH:
FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEVAD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
BB
B
B
B
44
4
4
4
1/4" = 1'-0"1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6"YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
NONENONE
NONE
NONE
NONE
B/A4.4B/A4.4
B/A4.4
B/A4.4
B/A4.4
PAINTEDPAINTED
PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISEELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AA
A
A108" R
.O.
108" R
.O.
108" R
.O.
108" R
.O.
108" R
.O.
107" F
.S.
107" F
.S.
107" F
.S.
107" F
.S.
107" F
.S.
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
148" A
.F.F
.
148" A
.F.F
.
148" A
.F.F
.
148" A
.F.F
.
148" A
.F.F
.
(NOT
TO
SCALE)
(NOT
TO
SCALE)
( NOT
TO
SCALE)
( NOT
TO
SCALE)
(NOT
TO
SCALE)
R.O.R.O.
R.O.
R.O.
R.O.
FINISH FLOORFINISH FLOOR
FINISH FLOOR
FINISH FLOOR
FINISH FLOOR
49 3/4" D.L.O.49 3/4" D.L.O.
49 3/4" D.L.O.
49 3/4" D.L.O.
49 3/4" D.L.O.
49 3/4" D.L.O.49 3/4" D.L.O.
49 3/4" D.L.O.
49 3/4" D.L.O.
49 3/4" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
AD_DTBATE_WESTAD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
1616
16
16
16
1515
15
15
15
AD_DTBATE_SOUTHAD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
1515
15
15
15
1515
15
15
15
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
1717
17
17
17
1515
15
15
15
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
1313
13
13
13
1515
15
15
15
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
1616
16
16
16
1515
15
15
15
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
1414
14
14
14
1515
15
15
15
94 3/8" R.O.94 3/8" R.O.
94 3/8" R.O.
94 3/8" R.O.
94 3/8" R.O.
(ALONG ARC)(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
93 3/8" F.S.93 3/8" F.S.
93 3/8" F.S.
93 3/8" F.S.
93 3/8" F.S.
(ALONG ARC)(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
1/2 "1/2 "
1/2 "
1/2 "
1/2 "
1/2 "1/2 "
1/2 "
1/2 "
1/2 "
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
. 42 3/8" D
.L.O
.
2 7/8" 2 7/8"
2 7/8"
2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8"
2 7/8"
2 7/8"
PLAN VIEW OF
PLAN VIEW OF
ELEVATION "B"
ELEVATION "B"
RAD
IUS =
252"
RAD
IUS =
252"
@ CO
LUMN LIN
E
@ CO
LUMN LIN
E
RAD
IUS =
29 5/16"
RAD
IUS =
29 5/16"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
2 7/8" 2 7/8"
2 7/8"
2 7/8"
2 7/8"
FABRICATOR NOTE:FABRICATOR NOTE:
FABRICATOR NOTE:
FABRICATOR NOTE:
MITER CUT VARIES AT MITER CUT VARIES AT
MITER CUT VARIES AT
MITER CUT VARIES AT
HORIZONTALS. SEE VERTICAL HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
MULLION DETAILS FOR CUT MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
ANGLE INFORMATION.ANGLE INFORMATION.
ANGLE INFORMATION.
ANGLE INFORMATION.
ANGLE INFORMATION.
93 7/8" R.O.
93 7/8" R.O.
CHORD DIMENSION
CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
92 15/16" F.S.
92 15/16" F.S.
CHORD DIMENSION
CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
7/16"
7/16"
7/16"
7/16"
170°
170°
80°
80°
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
45 1/4" R
.D.
45 1/4" R
.D.
45 1/4" R
.D.
45 1/4" R
.D.
1/2"
1/2"
1/2"
1/2"
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
. 42 3/8" D
.L.O
.
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE:SCALE:
SCALE:
SCALE:
SCALE:
FRAMING TYPE:FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:FINISH:
FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEVAD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
CC
C
C
C
88
8
8
8
1/4" = 1'-0"1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6"YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
NONENONE
NONE
NONE
NONE
C/A4.4C/A4.4
C/A4.4
C/A4.4
C/A4.4
PAINTEDPAINTED
PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISEELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AA
A
A
55 1/4" R
.O.
55 1/4" R
.O.
55 1/4" R
.O.
55 1/4" R
.O.
55 1/4" R
.O.
54 1/4" F.S
.
54 1/4" F.S
.
54 1/4" F.S
.
54 1/4" F.S
.
54 1/4" F.S
.
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
200 3/4" A
.F.F
.
200 3/4" A
.F.F
.
200 3/4" A
.F.F
.
200 3/4" A
.F.F
.
200 3/4" A
.F.F
.
(NOT
TO
SCALE)
(NOT
TO
SCALE)
( NOT
TO
SCALE)
( NOT
TO
SCALE)
(NOT
TO
SCALE)
R.O.R.O.
R.O.
R.O.
R.O.
FINISH FLOORFINISH FLOOR
FINISH FLOOR
FINISH FLOOR
FINISH FLOOR
49 1/4" D
.L.O
.
49 1/4" D
.L.O
.
49 1/4" D
.L.O
.
49 1/4" D
.L.O
.
49 1/4" D
.L.O
.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
AD_DTBATE_WESTAD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
1616
16
16
16
1515
15
15
15
AD_DTBATE_SOUTHAD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
1515
15
15
15
1515
15
15
15
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
1717
17
17
17
1515
15
15
15
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
1313
13
13
13
1515
15
15
15
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
1616
16
16
16
1515
15
15
15
94 3/8" R.O.94 3/8" R.O.
94 3/8" R.O.
94 3/8" R.O.
94 3/8" R.O.
(ALONG ARC)(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
93 3/8" F.S.93 3/8" F.S.
93 3/8" F.S.
93 3/8" F.S.
93 3/8" F.S.
(ALONG ARC)(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
(ALONG ARC)
1/2 "1/2 "
1/2 "
1/2 "
1/2 "
1/2 "1/2 "
1/2 "
1/2 "
1/2 "
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
. 42 3/8" D
.L.O
.
2 7/8" 2 7/8"
2 7/8"
2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8"
2 7/8"
2 7/8"
PLAN VIEW OF
PLAN VIEW OF
ELEVATION "C"
ELEVATION "C"
RAD
IUS =
252"
RAD
IUS =
252"
@ CO
LUMN LIN
E
@ CO
LUMN LIN
E
RAD
IUS =
29 5/16"
RAD
IUS =
29 5/16"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
2 7/8" 2 7/8"
2 7/8"
2 7/8"
2 7/8"
FABRICATOR NOTE:FABRICATOR NOTE:
FABRICATOR NOTE:
FABRICATOR NOTE:
FABRICATOR NOTE:
MITER CUT VARIES AT MITER CUT VARIES AT
MITER CUT VARIES AT
MITER CUT VARIES AT
MITER CUT VARIES AT
HORIZONTALS. SEE VERTICAL HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
MULLION DETAILS FOR CUT MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
ANGLE INFORMATION.ANGLE INFORMATION.
ANGLE INFORMATION.
ANGLE INFORMATION.
ANGLE INFORMATION.
93 7/8" R.O.
93 7/8" R.O.
CHORD DIMENSION
CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
92 15/16" F.S.
92 15/16" F.S.
CHORD DIMENSION
CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
7/16"
7/16"
7/16"
7/16"
170°
170°
80°
80°
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
45 1/4" R
.D.
45 1/4" R
.D.
45 1/4" R
.D.
45 1/4" R
.D.
1/2"
1/2"
1/2"
1/2"
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
.
42 3/8" D
.L.O
. 42 3/8" D
.L.O
.
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE:SCALE:
SCALE:
SCALE:
SCALE:
FRAMING TYPE:FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:FINISH:
FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEVAD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
D DD
D
D
1818
18
18
18
1/4" = 1'-0"1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
45TU, 2" X 4 1/2"45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
45TU, 2" X 4 1/2"
NONENONE
NONE
NONE
NONE
D/A4.4D/A4.4
D/A4.4
D/A4.4
D/A4.4
PAINTEDPAINTED
PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISEELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XXAD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AA
A
A
A
72" R.O.72" R.O.
72" R.O.
72" R.O.
72" R.O.
64" R
.O.
64" R
.O.
64" R
.O.
64" R
.O.
64" R
.O.
71 1/4" F.S.71 1/4" F.S.
71 1/4" F.S.
71 1/4" F.S.
71 1/4" F.S.
63" F
.S.
63" F
.S.
63" F
.S.
63" F
.S.
63" F
.S.
3/8 "3/8 "
3/8 "
3/8 "
3/8 "
3/8 "3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
5/8 "
5/8 "
5/8 "
5/8 "
5/8 "
28 1/2" D.L.O.28 1/2" D.L.O.
28 1/2" D.L.O.
28 1/2" D.L.O.
28 1/2" D.L.O.
28 1/2" D.L.O.28 1/2" D.L.O.
28 1/2" D.L.O.
28 1/2" D.L.O.
28 1/2" D.L.O.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
. 32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
.
32 5/8" D
.L.O
. 32 5/8" D
.L.O
.
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
2"
2" 2"
2"
2"
200"
200"
200"
200"
200"
(N.T
.S.)
(N.T
.S.)
( N.T
.S.)
( N.T
.S.)
(N.T
.S.)
R.O.R.O.
R.O.
R.O.
R.O.
FINISH FLOORFINISH FLOOR
FINISH FLOOR
FINISH FLOOR
FINISH FLOOR
AD_DTBATE_WESTAD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
44
4
4
4
1313
13
13
13
AD_DTBATE_SOUTHAD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
2020
20
20
20
1616
16
16
16
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
55
5
5
5
1313
13
13
13
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
1818
18
18
18
1616
16
16
16
AD_DTBATE_EASTAD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
44
4
4
4
1313
13
13
13
AD_DTBATE_NORTHAD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
1919
19
19
19
1616
16
16
16
VERIFY ALL DIMENSIONS
AD_XREFEL_SHEET
SBE-EE.DWG
E 48
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
7
AD_XREFEL_SHEET
SBE-EE.1.DWG
E.1 48
AD_XREFEL_SHEET
SBE-EF.DWG
F 48
AD_XREFEL_SHEET
SBE-EG.DWG
G 48
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE: SCALE:
SCALE:
SCALE:
FRAMING TYPE: FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE: DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.: REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH: FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEV AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
E E
E
E
2 2
2
2
1/4" = 1'-0" 1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6" YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
NONE NONE
NONE
NONE
E/A4.4 E/A4.4
E/A4.4
E/A4.4
PAINTED PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
A A
A
A
236 1/2" R.O. 236 1/2" R.O.
236 1/2" R.O.
236 1/2" R.O.
104" R
.O.
104" R
.O.
104" R
.O.
104" R
.O.
235 1/2" F.S. 235 1/2" F.S.
235 1/2" F.S.
235 1/2" F.S.
103" F
.S.
103" F
.S.
103" F
.S.
103" F
.S.
1/2 " 1/2 "
1/2 "
1/2 "
1/2 " 1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
77 1/4" D.L.O. 77 1/4" D.L.O.
77 1/4" D.L.O.
77 1/4" D.L.O.
77 1/4" D.L.O. 77 1/4" D.L.O.
77 1/4" D.L.O.
77 1/4" D.L.O.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
15" D.L.O. 15" D.L.O.
15" D.L.O.
15" D.L.O.
48 1/2" D.L.O. 48 1/2" D.L.O.
48 1/2" D.L.O.
48 1/2" D.L.O.
29 1/2" D.L.O. 29 1/2" D.L.O.
29 1/2" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
AD_DTBATE_WEST AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
24 24
24
24
17 17
17
17
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
23 23
23
23
16 16
16
16
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
21 21
21
21
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
24 24
24
24
17 17
17
17
R.O./FINISH FLOOR R.O./FINISH FLOOR
R.O./FINISH FLOOR
R.O./FINISH FLOOR
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE: SCALE:
SCALE:
SCALE:
FRAMING TYPE: FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE: DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.: REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH: FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEV AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
E.1 E.1
E.1
E.1
2 2
2
2
1/4" = 1'-0" 1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6" YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
NONE NONE
NONE
NONE
E/A4.4 E/A4.4
E/A4.4
E/A4.4
PAINTED PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
A A
A
A
236 1/2" R.O. 236 1/2" R.O.
236 1/2" R.O.
236 1/2" R.O.
104" R
.O.
104" R
.O.
104" R
.O.
104" R
.O.
235 1/2" F.S. 235 1/2" F.S.
235 1/2" F.S.
235 1/2" F.S.
103" F
.S.
103" F
.S.
103" F
.S.
103" F
.S.
1/2 " 1/2 "
1/2 "
1/2 "
1/2 " 1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
77 1/4" D.L.O. 77 1/4" D.L.O.
77 1/4" D.L.O.
77 1/4" D.L.O.
77 1/4" D.L.O. 77 1/4" D.L.O.
77 1/4" D.L.O.
77 1/4" D.L.O.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
34
1/4" D
.L.O
.
15" D.L.O. 15" D.L.O.
15" D.L.O.
15" D.L.O.
48 1/2" D.L.O. 48 1/2" D.L.O.
48 1/2" D.L.O.
48 1/2" D.L.O.
29 1/2" D.L.O. 29 1/2" D.L.O.
29 1/2" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
AD_DTBATE_WEST AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
24 24
24
24
17 17
17
17
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
23 23
23
23
16 16
16
16
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
21 21
21
21
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
26 26
26
26
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
24 24
24
24
17 17
17
17
R.O./FINISH FLOOR R.O./FINISH FLOOR
R.O./FINISH FLOOR
R.O./FINISH FLOOR
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE: SCALE:
SCALE:
SCALE:
FRAMING TYPE: FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE: DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.: REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH: FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEV AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
F F
F
F
1 1
1
1
1/4" = 1'-0" 1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6" YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
NONE NONE
NONE
NONE
F/A4.4 F/A4.4
F/A4.4
F/A4.4
PAINTED PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
A A
A
A
340" R.O. 340" R.O.
340" R.O.
340" R.O.
104" R
.O.
104" R
.O.
104" R
.O.
104" R
.O.
339" F.S. 339" F.S.
339" F.S.
339" F.S.
103" F
.S.
103" F
.S.
103" F
.S.
103" F
.S.
1/2 " 1/2 "
1/2 "
1/2 "
1/2 " 1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 5/8" D
.L.O
.
45 5/8" D
.L.O
.
45 5/8" D
.L.O
.
45 5/8" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
15" D.L.O. 15" D.L.O.
15" D.L.O.
15" D.L.O.
48 1/2" D.L.O. 48 1/2" D.L.O.
48 1/2" D.L.O.
48 1/2" D.L.O.
29 1/2" D.L.O. 29 1/2" D.L.O.
29 1/2" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
AD_DTBATE_WEST AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
24 24
24
24
17 17
17
17
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
23 23
23
23
16 16
16
16
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
27 27
27
27
17 17
17
17
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DT AD_DT
AD_DTBATE_EAST
AD_DTBATE_EAST
24 24
24
24
17 17
17
17
R.O./FINI R.O./FINI
R.O./FINISH FLOOR
R.O./FINISH FLOOR
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
45 9/16
" D
.L.O
.
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
REQ'D THUS REQ'D THUS
REQ'D THUS
REQ'D THUS
SCALE: SCALE:
SCALE:
SCALE:
FRAMING TYPE: FRAMING TYPE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE: DOOR(S) TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.: REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH: FINISH:
FINISH:
FINISH:
AD_ELVMARK_ELEV AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
G G
G
G
6 6
6
6
1/4" = 1'-0" 1/4" = 1'-0"
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6" YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
50D WIDE STILE 50D WIDE STILE
50D WIDE STILE
50D WIDE STILE
G/A4.4 G/A4.4
G/A4.4
G/A4.4
PAINTED PAINTED
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
A
288" R.O. 288" R.O.
288" R.O.
288" R.O.
104" R
.O.
104" R
.O.
104" R
.O.
104" R
.O.
287" F.S. 287" F.S.
287" F.S.
287" F.S.
103 1/2" F
.S.
103 1/2" F
.S.
103 1/2" F
.S.
103 1/2" F
.S.
1/2 " 1/2 "
1/2 "
1/2 "
1/2 " 1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
103" F
.S.
103" F
.S.
104" R
.O.
104" R
.O.
1/2 "
1/2 "
1/2 "
1/2 "
287" F.S. 287" F.S.
287" F.S.
287" F.S.
288" R.O.
1/2 " 1/2 "
1/2 "
1/2 "
1/2 " 1/2 "
1/2 "
1/2 "
12 1/2" D.L.O. 12 1/2" D.L.O.
12 1/2" D.L.O.
12 1/2" D.L.O.
36" D
.O.
36" D
.O.
36" D
.O.
36" D
.O.
36" D
.O.
36" D
.O.
36" D
.O.
36" D
.O.
84" D
.O.
84" D
.O.
84" D
.O.
84" D
.O.
12 1/ 12 1/
12 1/2" D.L.O.
12 1/2" D.L.O.
51" 51"
51" D.L.O.
51" D.L.O.
29 1/ 29 1/
29 1/2" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
37 3/4" D
.L.O
.
37 3/4" D
.L.O
.
37 3/4" D
.L.O
.
37 3/4" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
37 3/4" D
.L.O
.
37 3/4" D
.L.O
.
37 3/4" D
.L.O
.
37 3/4" D
.L.O
.
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
3 3/8" 3 3/8"
3 3/8"
3 3/8"
3 3/8" 3 3/8"
3 3/8"
3 3/8"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
2 1/2"
3 3/8" 3 3/8"
3 3/8"
3 3/8"
3 3/8" 3 3/8"
3 3/8"
3 3/8"
DOOR DOOR
DOOR NUMBERS INCLUDED
DOOR NUMBERS INCLUDED
A A
AT ELEVATION "G"
AT ELEVATION "G"
AD_DN AD_DN
AD_DNUMB_XX
AD_DNUMB_XX
A-104A A-104A
A-104A
A-104A
AD_DN AD_DN
AD_DNUMB_XX
AD_DNUMB_XX
B-105B B-105B
B-105B
B-105B
AD_DN AD_DN
AD_DNUMB_XX
AD_DNUMB_XX
C-105B C-105B
C-105B
C-105B
AD_DNUMB_XX
AD_DNUMB_XX
H- H-
H-105A
H-105A
AD_DNUMB_XX
AD_DNUMB_XX
G- G-
G-105A
G-105A
AD_DNUMB_XX
AD_DNUMB_XX
F- F-
F-105A
F-105A
RH RH
RH
RH
DOORS DOORS
DOORS
DOORS
AD_DNUMB_
AD_DNUMB_XX
A-105A
A-105A
AD_
AD_DNUMB_
F-104A
F-104A
AD_
AD_DNUMB_
H-104A
H-104A
AD_
AD_DNUMB_
G-104A
G-104A
AD_DNUMB_
AD_DNUMB_XX
C-106B
C-106B
AD_DNUMB_
AD_DNUMB_XX
B-106B
B-106B
LH
LH
DOORS
DOORS
AD_DTBATE_WEST AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
30 30
30
30
18 18
18
18
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
29 29
29
29
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
31 31
31
31
18 18
18
18
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
21 21
21
21
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
28 28
28
28
17 17
17
17
AD_GTYPEATE_XX AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
C C
C
C
AD_GTYPEATE_XX AD_GTYPEATE_XX
AD_GTYPEATE_XX
AD_GTYPEATE_XX
C C
C
C
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
23 23
23
23
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
22 22
22
22
16 16
16
16
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
26 26
26
26
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
25 25
25
25
17 17
17
17
AD_DTBATE_EAST AD_DTBATE_EAST
AD_DTBATE_EAST
AD_DTBATE_EAST
30 30
30
30
18 18
18
18
AD_DTBATE_WEST AD_DTBATE_WEST
AD_DTBATE_WEST
AD_DTBATE_WEST
31 31
31
31
18 18
18
18
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
24 24
24
24
17 17
17
17
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
24 24
24
24
17 17
17
17
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
25 25
25
25
17 17
17
17
AD_DTBATE_NORTH AD_DTBATE_NORTH
AD_DTBATE_NORTH
AD_DTBATE_NORTH
25 25
25
25
17 17
17
17
VERIFY ALL DIMENSIONS
AD_XREFEL_SHEET
SBE-EG.1.DWG
G.1 48
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
8
REQ'D THUS
SCALE:
FRAMING TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:
FINISH:
AD_ELVMARK_ELEVG.16
1/4" = 1'-0"
YCW750, 2 1/2" X 6"
NONE
G/A4.4
PAINTED
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
B
288" R.O.
287" F.S.1/2 " 1/2 "
C/L
51"
MULL
.
#1
42" 51"51" 51"
444" RADIUS, R.O.
443 1/2" RADIUS, F.S.
441" RADIUS, D.L.O.
C/L
MULL
.
#2
BAY
#1
R.O
.
BAY
#2
MULL
.
#4
MULL
.
#3
BAY
#3
C/L
C/L
BAY
#4
MULL
.
#5
BAY
#5
C/L
42"
2 1/2"
1/2 "
64 3/16"63 15/16"3
6
7
4
5
44"
55 3/8"
67"
64 3/16" 63 15/16"
54 13/16"
67"
43 1/8"
67" F.S
.
(@ H
IGHEST
POINT)
2 1/2"
D.L
.O. VAR
IES
SEE
SIZE CHART
1/2 "
68" R
.O.
(@ H
IGHEST
POINT)
LEFT SIDE
HEIGHT:
MULLION LENGTHS (HEIGHTS).....
2
1
MULLION
#:
43 1/8"
54 13/16" 55 3/8"
44"
RIGHT SIDE
HEIGHT:
62"3 59 3/16"
6
4
5
49 3/4"
58 7/8"
62"
38 7/8"
50 5/16"
59 3/16"
LEFT SIDE
D.L.O.:
D.L.O HEIGHTS.....
2
1
BAY #:
50 5/16"
38 7/8"
RIGHT SIDE
D.L.O.:
58 7/8"
49 3/4"
24"
288"
TYPICAL
CONNECTIONAD_DTBATE_EAST35
18R.O. GEOMETRY FOR ELEVATION "G.1"
(R.O. REPRESENTED BY DASHED OUTLINE)
MULL
.
#6
BAY
#6
MULL
. #7
R.O
.
AD_DTBATE_EAST34
18
JAMB
CONNECTION
R = RADIUS
R752 1/4"
R.O.
44"
DIMENSION CHARTS FOR ELEVATION "G.1" ONLY
44" R
.O.
43 1/8"
F.S
.
D.L.O. VARIES
SEE SIZE CHART
1/2 "
2 1/2"
3/8 "
1 13/16"
37 3/4" D
.O.
37 3/4" D
.O.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
48 1/2" D
.L.O
.
2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2"
120(N
.T.S
.)
FINISH FLOOR
AD_DTBATE_WEST24
17
AD_DTBATE_SOUTH
33
18
AD_DTBATE_EAST24
17
AD_DTBATE_NORTH32
18
AD_DTBATE_EAST25
17
AD_DTBATE_EAST25
17
AD_DTBATE_EAST25
17
AD_DTBATE_EAST25
17
AD_DTBATE_EAST25
17
VERIFY ALL DIMENSIONS
AD_XREFEL_SHEET
SBE-EH.DWG
H 48
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
9
REQ'D THUS
SCALE:
FRAMING TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:
FINISH:
AD_ELVMARK_ELEVH1
1/4" = 1'-0"
YCW750, 2 1/2" X 6"
50D WIDE STILE
H/A4.4
PAINTED
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
A
FABRICATOR NOTE:
MITER CUT VARIES AT
HORIZONTALS. SEE VERTICAL
MULLION DETAILS FOR CUT
ANGLE INFORMATION.
VESTIBULE
E-103
698 3/16" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
104" R
.O.
697 3/16" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
103 1/2" F
.S.
1/2 " 1/2 "
1/2 "
103" F
.S.
104" R
.O.
1/2 "
1/2 "
12 1/2" D.L.O.
44
1/16
" D
.L.O
.
36" D
.O.
84" D
.O.
12 1/2" D.L.O.
51" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
4 1/2"
46" D
.L.O
.
46" D
.L.O
.
46" D
.L.O
.
46" D
.L.O
.
2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8"
AD_DTBATE_NORTH36
18
AD_DTBATE_SOUTH
38
18
AD_DTBATE_SOUTH
37
18
AD_DTBATE_SOUTH
14
15
AD_DTBATE_SOUTH
14
15
AD_DTBATE_NORTH17
15
36" D
.O.
36" D
.O.
36" D
.O.
44
1/16
" D
.L.O
.
46" D
.L.O
.
46" D
.L.O
.
46" D
.L.O
.
46" D
.L.O
.
44
1/16
" D
.L.O
.
4 1/4" 4 1/4"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8"
46" D
.L.O
.
698 3/16" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
697 3/16" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
2 7/8"
44
1/16
" D
.L.O
.
1/2 "
2 7/8"
46" D
.L.O
.
2 7/8" 2 7/8"
46" D
.L.O
.
46" D
.L.O
.
2 7/8" 2 7/8"
46" D
.L.O
.
2 7/8" 2 7/8"
44
1/16
" D
.L.O
.
2 7/8" 2 7/8"
46" D
.L.O
.
46" D
.L.O
.
1/2 "
2 7/8"
2 7/8" 2 7/8"
44
1/16
" D
.L.O
.
46" D
.L.O
.
78 3/8" D.L.O. 78 3/8" D.L.O.
3 15/16"
3 15/16"
3 15/16"3 15/16"
AD_GTYPEATE_XXC
AD_GTYPEATE_XXC
AD_DNUMB_XX
E103ARH
AD_DNUMB_XX
E103ALH
AD_DNUMB_XX
E103RH
AD_DNUMB_XX
E103LH
AD_GTYPEATE_XXC
AD_GTYPEATE_XXC
AD_DTBATE_EAST42
19
AD_DTBATE_WEST41
19
AD_DTBATE_EAST41
19
AD_DTBATE_EAST41
19
AD_DTBATE_EAST42
19
AD_DTBATE_EAST41
19
AD_DTBATE_WEST39
18
AD_DTBATE_EAST40
19
AD_DTBATE_EAST40
19
AD_DTBATE_EAST40
19
AD_DTBATE_EAST40
19
AD_DTBATE_EAST40
19
AD_DTBATE_EAST40
19
AD_DTBATE_EAST40
19
AD_DTBATE_EAST40
19
AD_DTBATE_EAST39
18
AD_DTBATE_NORTH29
17
AD_DTBATE_NORTH17
15
AD_DTBATE_NORTH17
15
AD_DTBATE_NORTH17
15
PLAN VIEW OF
ELEVATION "H"
173° TYP.
(U.N.O.)
46" D
.L.O
.
48 7/8" R
.D.
605 3/4" R.O. CHORD DIMENSION
AT FACE OF SYSTEM.
605 1/16" F.S. CHORD DIMENSION
AT FACE OF SYSTEM.
44 1/16"
D.L
.O.
94°
46 15/16"
R.D
.
3/8"
1/2"
36" D
.O.
170°
46" D
.L.O
.
48 7/8" R
.D.
36" D
.O.
78 3/8" D.L.O.(@ TRANSOM)
81 1/4" R.D.(@ TRANSOM)
46 15/16
" R
.D.
173° TYP.
(U.N.O.)
48 7/8" R
.D.
48 7/8" R
.D.
48 7/8" R
.D.
46" D
.L.O
.46" D
.L.O
.
46" D
.L.O
.
170°
44
1/16
" D
.L.O
.
170°
RAD
IUS =
368"
@ COLUMN L
INE
RAD
IUS =
383 1/2"
@ F
.O. SYSTEM
48 7/8" R
.D.
78 3/8" D.L.O.
(@ TRANSOM)
81 1/4" R.D.
(@ TRANSOM)
36" D
.O.
36" D
.O.
46" D
.L.O
.
46" D
.L.O
.
48 7/8" R
.D.
170°
44 1/16" D
.L.O.46 15/16" R
.D.
94°
46" D
.L.O
.
48 7/8" R
.D.
1/2"
3/8"
AD_DTBATE_NORTH43
19
AD_DTBATE_NORTH43
19
VERIFY ALL DIMENSIONS
AD_XREFEL_SHEET
SBE-EI.DWG
I 48
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
10
AD_XREFEL_SHEET
SBE-EJ.DWG
J 48
REQ'D THUS
REQ'D THUS
SCALE:
SCALE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:
FINISH:
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
I
I
1
1
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
50D WIDE STILE
50D WIDE STILE
I/A4.4
I/A4.4
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
D
LOBBY
LOBBY
E-101
E-101
236 3/8" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
236 3/8" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
(SEE PLAN VIEW FOR MORE INFORMATION)
104" R
.O.
235 3/8" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
235 3/8" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
(SEE PLAN VIEW FOR MORE INFORMATION)103 1/2" F
.S.
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
103" F
.S.
104" R
.O.
1/2 "
1/2 "
12 1/2" D.L.O.
31 5/8" D
.L.O
.
31 5/8" D
36" D
.O.
36" D
.O
84" D
.O.
12 1/2" D.L.O.
51" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
4 1/2"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
AD_DTBATE_NORTH44
19
AD_DTBATE_SOUTH
47
19
AD_DTBATE_SOUTH
46
19
AD_DTBATE_SOUTH
45
19
AD_DTBATE_SOUTH
45
19
AD_DTBATE_NORTH52
20
36" D
.O.
36" D
.O
36" D
.O.
36" D
.O
36" D
.O.
36" D
.O
31 5/8" D
.L.O
.
31 5/8" D
4 1/4"
4 1/4"
236 3/8" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
235 3/8" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
3 1/8"
31 5/8" D
.L.O
.
1/2 "
2 7/8"
1/2 "
2 7/8"
AD_DNUMB_XX
E101ARH
AD_DNUMB_XX
E101ALH
AD_DNUMB_XX
E101RH
AD_DNUMB_XX
E101LH
AD_DTBATE_EAST42
19
AD_DTBATE_WEST50
19
AD_DTBATE_EAST51
20
AD_DTBATE_WEST49
19
AD_DTBATE_NORTH48
19
PLAN VIEW OF
PLAN VIEW OF
ELEVATION "I"
ELEVATION "I"
227 9/16" R.O. CHORD DIMENSION
227 9/16" R.O. CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
226 11/16" F.S. CHORD DIMENSION
226 11/16" F.S. CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
7/16"
7/16"
RAD
IUS =
252"
RAD
IUS =
252"
@ COLUMN L
INE
@ COLUMN L
INE
RAD
IUS =
245"
RAD
IUS =
245"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
31 5/8" D
.L.O
.
31 5/8" D
.L.O
.
34 11/
16" R
.D.
34 11/
16" R
.D.
36" D
.L.O
.
36" D
.L.O
.
36" D
.L.O
.
36" D
.L.O
.
78 1/2" D.L.O.
78 1/2" D.L.O.
(@ TRANSOM)
(@ TRANSOM)
81 5/8" R.D.
81 5/8" R.D.
(@ TRANSOM)
(@ TRANSOM)
36" D
.L.O
.
36" D
.L.O
.
36" D
.L.O
.
36" D
.L.O
.
78 1/2" D.L.O.
78 1/2" D.L.O.
(@ TRANSOM)
(@ TRANSOM)
81 5/8" R.D.
81 5/8" R.D.
(@ TRANSOM)
(@ TRANSOM)
31 5
/8" D
.L.O
.
31 5
/8" D
.L.O
.
34 11/
16" R
.D.
34 11/
16" R
.D.
5 3/8"
4 1/4" 4 1/4"
78 1/2" D.L.O. 78 1/2" D.L.O.
31 5/8" D
.L.O
.
3 1/8" 3 1/8"
AD_DTBATE_EAST42
19
AD_DTBATE_EAST50
19
AD_DTBATE_EAST49
19
AD_DTBATE_NORTH53
20
AD_DTBATE_NORTH52
20
86°
86°
165°
165°
161°
161°
86°
86°
165°
165°
1/2"
1/2"
1/2"
1/2"
7/16"
7/16"
FABRICATOR NOTE:
FABRICATOR NOTE:
MITER CUT VARIES AT
MITER CUT VARIES AT
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
ANGLE INFORMATION.
ANGLE INFORMATION.
AD_DTBATE_NORTH43
19
AD_DTBATE_NORTH43
19
REQ'D THUS
REQ'D THUS
SCALE:
SCALE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:
FINISH:
AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
J
J
2
2
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
NONE
NONE
J/A4.4
J/A4.4
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
D
D
45 7/16
" D
.L.O
.
45 7/16
" D
.L.O
.
48 5/16
" R
.D.
48 5/16
" R
.D.
LOBBY
LOBBY
E-101
E-101
52 3/16" R
.O.
52 3/16" R
.O.
51 3/16" F
.S.
51 3/16" F
.S.
1/2 "
1/2 "
1/2 "
1/2 "
103" F
.S.
103" F
.S.
104" R
.O.
104" R
.O.
1/2 "
1/2 "
1/2 "
1/2 "
45 7/16" D
.L.O
.
45 7/16" D
.L.O
.
12 1/2" D.L.O.
12 1/2" D.L.O.
51" D.L.O.
51" D.L.O.
29 1/2" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
AD_DTBATE_NORTH
AD_DTBATE_NORTH
44
44
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
46
46
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
45
45
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
45
45
19
19
AD_DTBATE_WEST
AD_DTBATE_WEST
54
54
20
20
PLAN VIEW OF
PLAN VIEW OF
ELEVATION "J"
ELEVATION "J"
1/2"
1/2"
RAD
IUS =
252"
RAD
IUS =
252"
@ COLUMN L
INE
@ COLUMN L
INE
RAD
IUS =
245"
RAD
IUS =
245"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
AD_DTBATE_EAST
AD_DTBATE_EAST
54
54
20
20
1/2"
1/2"
FABRICATOR NOTE:
FABRICATOR NOTE:
MITER CUT VARIES AT
MITER CUT VARIES AT
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
ANGLE INFORMATION.
ANGLE INFORMATION.
52 3/16" R.O. CHORD
52 3/16" R.O. CHORD
DIM. @ F.O. SYSTEM.
DIM. @ F.O. SYSTEM.
51 3/16" F.S. CHORD
51 3/16" F.S. CHORD
DIM. @ F.O. SYSTEM.
DIM. @ F.O. SYSTEM.
84°
84°
84°
84°
1/2"
1/2"
1/2"
1/2"
VERIFY ALL DIMENSIONS
AD_XREFEL_SHEET
SBE-EK.DWG
K 48
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
11
AD_XREFEL_SHEET
SBE-EL.DWG
L 48
REQ'D THUS
REQ'D THUS
SCALE:
SCALE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:
FINISH:AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
K
K
1
1
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
NONE
NONE
K/A4.4
K/A4.4
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
AD_MGTYPEATE_XX
D
D
LOBBY
LOBBY
E-101
E-101
236 7/8" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
236 7/8" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
(SEE PLAN VIEW FOR MORE INFORMATION)
235 7/8" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
235 7/8" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
(SEE PLAN VIEW FOR MORE INFORMATION)
1/2 "
1/2 "
1/2 "
1/2 "
103" F
.S.
103" F
.S.
104" R
.O.
104" R
.O.
1/2 "
1/2 "
1/2 "
1/2 "
49 5/8" D
.L.O
.
49 5/8" D
.L.O
.
47 1/8" D
.L.O
.
47 1/8" D
.L.O
.
12 1/2" D.L.O.
12 1/2" D.L.O.51" D.L.O.
51" D.L.O.29 1/2" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
AD_DTBATE_NORTH
AD_DTBATE_NORTH
44
44
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
46
46
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
45
45
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
45
45
19
19
25 1/8" D
.L.O
.
25 1/8" D
.L.O
.
47 1/8" D
.L.O
.
47 1/8" D
.L.O
.
49 5/8" D
.L.O
.
49 5/8" D
.L.O
.
2 7/8"
2 7/8"
2 7/8"
2 7/8"
AD_DTBATE_WEST
AD_DTBATE_WEST
55
55
20
20
PLAN VIEW OF
PLAN VIEW OF
ELEVATION "K"
ELEVATION "K"
228" R.O. CHORD DIMENSION
228" R.O. CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
227 1/16" F.S. CHORD DIMENSION
227 1/16" F.S. CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
7/16"
7/16"
RAD
IUS =
252"
RAD
IUS =
252"
@ COLUMN L
INE
@ COLUMN L
INE
RAD
IUS =
245"
RAD
IUS =
245"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
2 7/8"
2 7/8"
2 7/8"
2 7/8"
AD_DTBATE_EAST
AD_DTBATE_EAST
55
55
20
20
7/16"
7/16"
FABRICATOR NOTE:
FABRICATOR NOTE:
MITER CUT VARIES AT
MITER CUT VARIES AT
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
ANGLE INFORMATION.
ANGLE INFORMATION.
49 5/8" D
.L.O
.
49 5/8" D
.L.O
.
25 1/8" D
.L.O
.
25 1/8" D
.L.O
.
49 5/8" D
.L.O
.
49 5/8" D
.L.O
.47 1/
8" D
.L.O
.
47 1/
8" D
.L.O
.
47 1/8" D
.L.O
.
47 1/8" D
.L.O
.52 1/
2" R
.D.
52 1/
2" R
.D.
50" R
.D.
50" R
.D.
28" R
.D.
28" R
.D.
50" R
.D.
50" R
.D.
52 1/2" R
.D.
52 1/2" R
.D.
168°
168°
171°
171°
171°
171°
168°
168°
84°
84°
84°
84°
AD_DTBATE_EAST
AD_DTBATE_EAST
56
56
20
20
AD_DTBATE_EAST
AD_DTBATE_EAST
57
57
20
20
AD_DTBATE_EAST
AD_DTBATE_EAST
56
56
20
20
AD_DTBATE_WEST
AD_DTBATE_WEST
57
57
20
20
1/2"
1/2"
1/2"
1/2"
REQ'D THUS
REQ'D THUS
SCALE:
SCALE:
FRAMING TYPE:
FRAMING TYPE:
DOOR(S) TYPE:
DOOR(S) TYPE:
REF. ARCH. ELEV.:
REF. ARCH. ELEV.:
FINISH:
FINISH:AD_ELVMARK_ELEV
AD_ELVMARK_ELEV
L
L
2
2
1/4" = 1'-0"
1/4" = 1'-0"
YCW750, 2 1/2" X 6"
YCW750, 2 1/2" X 6"
50D WIDE STILE
50D WIDE STILE
L/A4.4
L/A4.4
PAINTED
PAINTED
TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX
D
LOBBY
LOBBY
E-101
E-101
236 3/4" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
236 3/4" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
(SEE PLAN VIEW FOR MORE INFORMATION)
104" R
.O.
235 3/4" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
235 3/4" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
(SEE PLAN VIEW FOR MORE INFORMATION)
103 1/2" F
.S.
103 1/2" F
.S.
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
103" F
.S.
103" F
.S.
104" R
.O.
104" R
.O.
1/2 "
1/2 "
1/2 "
1/2 "
12 1/2" D.L.O.
12 1/2" D.L.O.
25" D
.L.O
.
25" D
.L.O
.
36" D
.O.
36" D
.O.
84" D
.O.
84" D
.O.
12 1/2" D.L.O.
12 1/2" D.L.O.51" D.L.O.
51" D.L.O.29 1/2" D.L.O.
29 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
4 1/2"
4 1/2"
2 7/8"
2 7/8"
2 7/8"
2 7/8"
AD_DTBATE_NORTH
AD_DTBATE_NORTH
44
44
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
58
58
20
20
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
46
46
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
45
45
19
19
AD_DTBATE_SOUTH
AD_DTBATE_SOUTH
45
45
19
19
AD_DTBATE_NORTH
AD_DTBATE_NORTH
63
63
21
21
36" D
.O.
36" D
.O.
4 1/4"
4 1/4"
236 3/4" R.O. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
235 3/4" F.S. DIMENSION ALONG ARC AT FACE OF SYSTEM.
(SEE PLAN VIEW FOR MORE INFORMATION)
(SEE PLAN VIEW FOR MORE INFORMATION)
2 7/8"
2 7/8"
44
15/16
" D
.L.O
.
44
15/16
" D
.L.O
.
1/2 "2 7/8"
2 7/8"
1/2 "2 7/8"
2 7/8"
AD_DTBATE_EAST
AD_DTBATE_EAST
62
62
21
21
AD_DTBATE_WEST
AD_DTBATE_WEST
61
61
21
21
AD_DTBATE_WEST
AD_DTBATE_WEST
60
60
20
20
AD_DTBATE_NORTH
AD_DTBATE_NORTH
59
59
20
20
PLAN VIEW OF
PLAN VIEW OF
ELEVATION "L"
ELEVATION "L"
227 15/16" R.O. CHORD DIMENSION
227 15/16" R.O. CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
227 1/8" F.S. CHORD DIMENSION
227 1/8" F.S. CHORD DIMENSION
AT FACE OF SYSTEM.
AT FACE OF SYSTEM.
7/16"
7/16"
RAD
IUS =
252"
RAD
IUS =
252"
@ COLUMN L
INE
@ COLUMN L
INE
RAD
IUS =
245"
RAD
IUS =
245"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
4 1/16"
4 1/16"
25" D
.L.O
.
25" D
.L.O
.
78 1/8" D.L.O.
78 1/8" D.L.O.
44
15/16
" D
.L.O
.
44
15/16
" D
.L.O
.
3 1/8"
3 1/8"
2 7/8"
2 7/8"
AD_DTBATE_EAST
AD_DTBATE_EAST
60
60
20
20
7/16"
7/16"
FABRICATOR NOTE:
FABRICATOR NOTE:
MITER CUT VARIES AT
MITER CUT VARIES AT
HORIZONTALS. SEE VERTICAL
HORIZONTALS. SEE VERTICAL
MULLION DETAILS FOR CUT
MULLION DETAILS FOR CUT
ANGLE INFORMATION.
ANGLE INFORMATION.
44 15/16" D
.L.O
.
44 15/16" D
.L.O
.
25" D
.L.O
.
25" D
.L.O
.
36" D
.O.
36" D
.O.
36" D
.O.
36" D
.O.78 1/8" D.L.O.
78 1/8" D.L.O.
(@ TRANSOM)
(@ TRANSOM)
81 1/4" R.D.
81 1/4" R.D.
(@ TRANSOM)
(@ TRANSOM)
47 13/16" R
.D.
47 13/16" R
.D.
28" R
.D.
28" R
.D.
28" R
.D.
28" R
.D.
25" D
.L.O
.
25" D
.L.O
.
44 15
/16" D
.L.O
.
44 15
/16" D
.L.O
.
47 13
/16" R
.D.
47 13
/16" R
.D.
167°
167°
171°
171°
84°
84°
167°
167°
171°
171°
84°
84°
44
15/16
" D
.L.O
.
44
15/16
" D
.L.O
.25" D
.L.O
.
25" D
.L.O
.44
15/16
" D
.L.O
.
44
15/16
" D
.L.O
.
2 7/8"
2 7/8"
2 7/8"
2 7/8"
4 1/16"
4 1/16"
25" D
.L.O
.
25" D
.L.O
.
3 1/8"
3 1/8"
DOOR NUMBERS INCL
DOOR NUMBERS INCLUDED
AT ELEVATION "
AT ELEVATION "L"AD_DNUMB_X
AD_DNUMB_XX
E-108LH
E-108LH
AD_DNUMB_X
AD_DNUMB_XX
E-126LH
E-126LH
(2) LH
(2) LH
DOORS
DOORS
(2) RH
DOORS
AD_DTBATE_EAST
AD_DTBATE_EAST
61
61
21
21
AD_DTBATE_EAST
AD_DTBATE_EAST
57
57
20
20
AD_DTBATE_WEST
AD_DTBATE_WEST
57
57
20
20
AD_DNUMB_XX
E-12
E-126RH
AD_DNUMB_XX
E-10
E-108RH
7/16"
7/16"
7/16"
7/16"
AD_DTBATE_NORTH
AD_DTBATE_NORTH
43
43
19
19
AD_DTBATE_NORTH
AD_DTBATE_NORTH
63
63
21
21
VERIFY ALL DIMENSIONS
AD_XREFEL_SHEET
SBE-EM.DWG
M 48
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
12
AD_XREFEL_SHEET
SBE-EN.DWG
N 48
REQ'D THUS REQ'D THUS
SCALE: SCALE:
FRAMING TYPE: FRAMING TYPE:
DOOR(S) TYPE: DOOR(S) TYPE:
REF. ARCH. ELEV.: REF. ARCH. ELEV.:
FINISH: FINISH:
AD_ELVMARK_ELEV AD_ELVMARK_ELEVM M2 2
1/4" = 1'-0" 1/4" = 1'-0"
YCW750, 2 1/2" X 6" YCW750, 2 1/2" X 6"
NONE NONE
M/A4.4 M/A4.4
PAINTED PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX AD_MGTYPEATE_XX
A A
150 1/4" R.O. 150 1/4" R.O.
184" R
.O.
184" R
.O.
149 3/4" F.S. 149 3/4" F.S.
183" F
.S.
183" F
.S.
1/2 " 1/2 "
1/2 "
1/2 "
1/2 "
1/2 "
44
9/16
" D
.L.O
.
44
9/16
" D
.L.O
.
44
5/8" D
.L.O
.
44
5/8" D
.L.O
.
44
9/16
" D
.L.O
.
44
9/16
" D
.L.O
.
8 1/2" 8 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2"
AD_ELSYM_SOUTH AD_ELSYM_SOUTH
M M
12 12
AD_ELSYM_EAST AD_ELSYM_EASTN N
12 12
90° 90°
OUTSIDE OUTSIDE
CORNER CORNER
FINISH FINISH
FLOOR FLOOR
104"
104"
77"
77"
SUSPENDED SUSPENDED
CEILING CEILING
EL. 8'-8" EL. 8'-8"
T.O. BEAMS T.O. BEAMS
EL. 15'-1" EL. 15'-1"
29 1/2" D.L.O. 29 1/2" D.L.O.
66 1/2" D.L.O. 66 1/2" D.L.O.
16" D.L.O. 16" D.L.O.
58 1/2" D.L.O. 58 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
104"
104"
FINISH FINISH
FLOOR FLOOR
SUSPENDED SUSPENDED
CEILING CEILING
EL. 8'-8" EL. 8'-8"
T.O. BEAMS T.O. BEAMS
EL. 15'-1" EL. 15'-1"
77"
77"
WALL SECTION WALL SECTION
"A - A" "A - A"
A A
A A
183" F
.S./M
.L.
183" F
.S./M
.L.AD_GTYPEATE_XX AD_GTYPEATE_XX
B BAD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_DTBATE_WEST AD_DTBATE_WEST67 67
22 22
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
66 66
21 21
AD_DTBATE_EAST AD_DTBATE_EAST25 25
17 17
AD_DTBATE_NORTH AD_DTBATE_NORTH64 64
21 21
AD_DTBATE_NORTH AD_DTBATE_NORTH22 22
16 16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
65 65
21 21
AD_DTBATE_NORTH AD_DTBATE_NORTH22 22
16 16
AD_DTBATE_EAST AD_DTBATE_EAST25 25
17 17
AD_DTBATE_EAST AD_DTBATE_EAST68 68
22 22
REQ'D THUS REQ'D THUS
SCALE: SCALE:
FRAMING TYPE: FRAMING TYPE:
DOOR(S) TYPE: DOOR(S) TYPE:
REF. ARCH. ELEV.: REF. ARCH. ELEV.:
FINISH: FINISH:
AD_ELVMARK_ELEV AD_ELVMARK_ELEVN N2 2
1/4" = 1'-0" 1/4" = 1'-0"
YCW750, 2 1/2" X 6" YCW750, 2 1/2" X 6"
NONE NONE
N/A4.4 N/A4.4
PAINTED PAINTED
TYPICAL GLASS TYPE AT THIS TYPICAL GLASS TYPE AT THIS
ELEVATION UNLESS NOTED OTHERWISE ELEVATION UNLESS NOTED OTHERWISE
AD_MGTYPEATE_XX AD_MGTYPEATE_XX
A A
184" R
.O.
184" R
.O.
183" F
.S.
183" F
.S.
1/2 "
1/2 "
1/2 "
1/2 "
AD_ELSYM_SOUTH AD_ELSYM_SOUTH
N N
12 12
90° 90°
OUTSIDE OUTSIDE
CORNER CORNER
FINISH FINISH
FLOOR FLOOR
104"
104"
77"
77"
SUSPENDED SUSPENDED
CEILING CEILING
EL. 8'-8" EL. 8'-8"
T.O. BEAMS T.O. BEAMS
EL. 15'-1" EL. 15'-1"
29 1/2" D.L.O. 29 1/2" D.L.O.
66 1/2" D.L.O. 66 1/2" D.L.O.
16" D.L.O. 16" D.L.O.
58 1/2" D.L.O. 58 1/2" D.L.O.
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
104"
104"
FINISH FINISH
FLOOR FLOOR
SUSPENDED SUSPENDED
CEILING CEILING
EL. 8'-8" EL. 8'-8"
T.O. BEAMS T.O. BEAMS
EL. 15'-1" EL. 15'-1"
77"
77"
WALL SECTION WALL SECTION
"B - B" "B - B"
B B
B B
183" F
.S./M
.L.
183" F
.S./M
.L.AD_GTYPEATE_XX AD_GTYPEATE_XX
B BAD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_GTYPEATE_XX AD_GTYPEATE_XXB B
AD_DTBATE_WEST AD_DTBATE_WEST68 68
22 22
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
66 66
21 21
AD_DTBATE_EAST AD_DTBATE_EAST25 25
17 17
AD_DTBATE_NORTH AD_DTBATE_NORTH64 64
21 21
AD_DTBATE_NORTH AD_DTBATE_NORTH22 22
16 16
AD_DTBATE_SOUTH AD_DTBATE_SOUTH
65 65
21 21
AD_DTBATE_NORTH AD_DTBATE_NORTH22 22
16 16
AD_DTBATE_EAST AD_DTBATE_EAST25 25
17 17
AD_DTBATE_EAST AD_DTBATE_EAST67 67
22 22
2 1/2" 2 1/2" 8 1/2" 8 1/2"
44
9/16
" D
.L.O
.
44
9/16
" D
.L.O
.
44
5/8" D
.L.O
.
44
5/8" D
.L.O
.
44
9/16
" D
.L.O
.
44
9/16
" D
.L.O
.
1/2 " 1/2 "149 3/4" F.S. 149 3/4" F.S.
150 1/4" R.O. 150 1/4" R.O.
2 1/2" 2 1/2" 2 1/2" 2 1/2"
AD_ELSYM_WEST AD_ELSYM_WESTM M
12 12
AD_XREFDTL_SHEET
SBE-D1.DWG
1 2
AD_XREFDTL_SHEET
SBE-D2.DWG
2 2
AD_XREFDTL_SHEET
SBE-D3.DWG
3 2
AD_XREFDTL_SHEET
SBE-D4.DWG
4 2
AD_XREFDTL_SHEET
SBE-D5.DWG
5 2
AD_XREFDTL_SHEET
SBE-D6.DWG
6 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
13
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_DTBATD_XX
1 1 1
1 1 1
1 1 1
1 1 1
A4.5 A4.5 A4.5
A4.5 A4.5 A4.5
HEAD HEAD HEAD
HEAD HEAD HEAD
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
E1-1054 E1-1054 E1-1054
E1-1054 E1-1054 E1-1054
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2"
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2"
2"
2"
2"
2"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
5 5 5
5 5 5
4 4 4
4 4 4
8 8 8
8 8 8
6 6 6
6 6 6
3 1/2" 3 1/2" 3 1/2"
3 1/2" 3 1/2" 3 1/2"
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
6 6 6
6 6 6
8 8 8
8 8 8
20 20 20
20 20 20
NOTE "A" NOTE "A" NOTE "A"
NOTE "A" NOTE "A" NOTE "A"
NOTE A: NOTE A: NOTE A:
NOTE A:
ADI DOES NOT ADI DOES NOT ADI DOES NOT
ADI DOES NOT
RECOMMEND ALLOWING RECOMMEND ALLOWING RECOMMEND ALLOWING
RECOMMEND ALLOWING
ANCHOR FASTENERS ANCHOR FASTENERS ANCHOR FASTENERS
ANCHOR FASTENERS
TO PENETRATE LINTEL. TO PENETRATE LINTEL. TO PENETRATE LINTEL.
TO PENETRATE LINTEL.
COORDINATE COORDINATE COORDINATE
COORDINATE
ANCHORING WITH G.C. ANCHORING WITH G.C. ANCHORING WITH G.C.
ANCHORING WITH G.C.
27 27 27
27 27 27
21 21 21
21 21 21
26 26 26
26 26 26
25 25 25
25
6 6 6
6 6 6
8 8 8
8 8 8
3 3 3
3 3 3
6 6 6
6 6 6
7 7 7
7 7 7
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8"
AD_D AD_D AD_DTBATD_XX
AD_DTBATD_XX
2 2 2
2
NONE NONE NONE
NONE
NONE NONE NONE
NONE
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
2"
2"
2"
2"
2" 2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2"
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0020 E2-0020 E2-0020
E2-0020 E2-0020 E2-0020
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E9-1020 E9-1020 E9-1020
E9-1020 E9-1020 E9-1020
W.H
.
W.H
.
W.H
.
W.H
.
W.H
.
W.H
.
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
WINDOW
R.O
.
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
1 3/16" 1 3/16" 1 3/16"
1 3/16" 1 3/16" 1 3/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1 1/4" 1 1/4" 1 1/4"
1 1/4" 1 1/4" 1 1/4"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
4 4 4
4 4 4
12 12 12
12 12 12
11 11 11
11 11 11
12 12 12
12 12 12
E2-0610 E2-0610 E2-0610
E2-0610 E2-0610 E2-0610
AD_D
AD_D
3
3
1
1
A4.5
A4.5
SILL
SILL
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2"
2"
2"
2"
2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
4 1/2" 4 1/2" 4 1/2"
4 1/2"
BE9-2560 BE9-2560 BE9-2560
BE9-2560 BE9-2560 BE9-2560
BE9-2554
BE9-2554
BE9-2554
BE9-2554
BE9-2554
BE9-2554
E1-1054 E1-1054 E1-1054
E1-1054 E1-1054 E1-1054
E9-1015 E9-1015 E9-1015
E9-1015 E9-1015 E9-1015
4 4 4
4 4 4
7 7 7
7 7 7
8 8 8
8 8 8
6 6 6
6 6 6
NOTE "B" NOTE "B" NOTE "B"
NOTE "B" NOTE "B" NOTE "B"
NOTE B: NOTE B: NOTE B:
NOTE B: NOTE B: NOTE B:
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
CONFIGURATION MAY CONFIGURATION MAY CONFIGURATION MAY
CONFIGURATION MAY CONFIGURATION MAY CONFIGURATION MAY
CREATE "EDGE CREATE "EDGE CREATE "EDGE
CREATE "EDGE CREATE "EDGE CREATE "EDGE
DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH
DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING
COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING
WITH G.C. WITH G.C. WITH G.C.
WITH G.C. WITH G.C. WITH G.C.
21 21 21
21 21 21
26 26 26
26 26 26
6 6 6
6 6 6
8 8 8
8 8 8
6 6 6
6 6 6
E9-1020 E9-1020 E9-1020
E9-1020 E9-1020 E9-1020
W.H
.W
.H.
WINDOW
R.O
.W
INDOW
R.O
.
1/8"
1/8"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
1 3/16" 1 3/16" 1 3/16"
1 3/16" 1 3/16" 1 3/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1 1/4" 1 1/4" 1 1/4"
1 1/4" 1 1/4" 1 1/4"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
4 4 4
4 4 4
3 3 3
3 3 3
11 11 11
11 11 11
12 12 12
12 12 12
5 5 5
5 5 5
8 8 8
8 8 8
6 6 6
6 6 6
2 7/8" 2 7/8" 2 7/8"
2 7/8"
E2-0704 E2-0704 E2-0704
E2-0704 E2-0704 E2-0704
E2-0610 E2-0610 E2-0610
E2-0610 E2-0610 E2-0610
7 7 7
7 7 7
20
20
25 25 25
25 25 25
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_DTBATD_XX
4 4 4
4 4 4
1 1 1
1 1 1
A4.5 A4.5 A4.5
A4.5 A4.5 A4.5
JAMB JAMB JAMB
JAMB JAMB JAMB
BE9-2553 BE9-2553 BE9-2553
BE9-2553 BE9-2553 BE9-2553
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
R.O. R.O. R.O.
R.O. R.O. R.O.
F.S. F.S. F.S.
F.S. F.S. F.S.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
2" 2" 2"
2" 2" 2"
3/8" 3/8" 3/8"
3/8" 3/8" 3/8"
6 6 6
6 6 6
8 8 8
8 8 8
E1-1054
E1-1054
E1-1054
E1-1054
E1-1054
E1-1054
NOTE B: NOTE B: NOTE B:
NOTE B: NOTE B: NOTE B:
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE
CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE
"EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH
"EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C.
COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C.
5 5 5
5 5 5
21 21 21
21 21 21
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
6 6 6
6 6 6
8 8 8
8 8 8
NOTE "B" NOTE "B" NOTE "B"
NOTE "B" NOTE "B" NOTE "B"
4 4 4
4 4 4
20 20 20
20 20 20
25 25 25
25 25 25
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_DTBATD_XX
5 5 5
5 5 5
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
VERTICAL VERTICAL VERTICAL
VERTICAL VERTICAL VERTICAL
BE9-2552 BE9-2552 BE9-2552
BE9-2552 BE9-2552 BE9-2552
BE9-2553 BE9-2553 BE9-2553
BE9-2553 BE9-2553 BE9-2553
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
2" 2" 2"
2" 2" 2"
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
AD_D
AD_D
6
6
1
1
A4.5
A4.5
JAMB
JAMB
BE9-2553 BE9-2553 BE9-2553
BE9-2553 BE9-2553 BE9-2553
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
R.O. R.O. R.O.
R.O. R.O. R.O.
F.S. F.S. F.S.
F.S. F.S. F.S.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
2" 2" 2"
2" 2" 2"
3/8" 3/8" 3/8"
3/8" 3/8" 3/8"
6 6 6
6 6 6
8 8 8
8 8 8
E1-1054
E1-1054
E1-1054
E1-1054
E1-1054
E1-1054
NOTE B: NOTE B: NOTE B:
NOTE B: NOTE B: NOTE B:
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE
CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE
"EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH
"EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C.
COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C.
5 5 5
5 5 5
21 21 21
21 21 21
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
6 6 6
6 6 6
8 8 8
8 8 8
NOTE "B" NOTE "B" NOTE "B"
NOTE "B" NOTE "B" NOTE "B"
4 4 4
4 4 4
20 20 20
20
25 25 25
25 25 25
6 6 6
6 6 6
8 8 8
8 8 8
6 6 6
6 6 6
2 7/8"
2 7/8"
E9-1020
E9-1020
E9-1020
E9-1020
E9-1020
E9-1020
W.H. W.H. W.H.
W.H.
WINDOW R.O. WINDOW R.O. WINDOW R.O.
WINDOW R.O.
1/8" 1/8" 1/8"
1/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 3/16"
3/8" 3/8" 3/8"
3/8" 3/8" 3/8"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
5/16" 5/16" 5/16"
5/16" 5/16" 5/16"
4 4 4
4 4 4
12 12 12
12 12 12
12 12 12
12 12 12
E2-0610 E2-0610 E2-0610
E2-0610 E2-0610 E2-0610
11 11 11
11 11 11
7 7 7
7 7 7
3 3 3
3 3 3
AD_XREFDTL_SHEET
SBE-D7.DWG
7 2
AD_XREFDTL_SHEET
SBE-D8.DWG
8 2
AD_XREFDTL_SHEET
SBE-D9.DWG
9 2
AD_XREFDTL_SHEET
SBE-D10.DWG
10 2
AD_XREFDTL_SHEET
SBE-D11.DWG
11 2
AD_XREFDTL_SHEET
SBE-D12.DWG
12 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
14
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
AD_D
AD_D
7
7
NONE
NONE
NONE
NONE
VERTICAL VERT VERT
VERTICAL VERT VERT
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
6 6 6
6 6 6
8 8 8
8 8 8
6 6 6
6 6 6
2 7/8"
2 7/8"
E9-1020
E9-1020
E9-1020
E9-1020
E9-1020
E9-1020
W.H. W.H.
W.H.
WINDOW R.O. WINDOW R.O.
WINDOW R.O.
D.L.O. D.L. D.L
D.L.O. D.L. D.L.
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4
1 1/4
4 4 4
4 4 4
12 12 12
12 12 12
12 12 12
12 12 12
E2-0610 E2-0610 E2-0610
E2-0610 E2-0610 E2-0610
11 11 11
11 11 11
7 7 7
7 7 7
3 3 3
3 3 3
E9-1020
E9-1020
E9-1020
E9-1020
E9-1020
E9-1020
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
2" 2" 2"
2" 2" 2"
BE9-2553 BE9-2553 BE9-2553
BE9-2553 BE9-2553 BE9-2553
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
WINDOW R.O. WINDOW R.O.
WINDOW R.O.
W.H. W.H.
W.H.
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 3/16"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4
1 1/4
5/16" 5/16" 5/16"
5/16" 5/16" 5/16"
1/8" 1/8"
1/8"
3/8" 3/8" 3/8"
3/8" 3/8" 3/8"
BE9-2552 BE9-2552 BE9-2552
BE9-2552 BE9-2552 BE9-2552
6 6 6
6 6 6
8 8 8
8 8 8
4 4 4
4 4 4
7 7 7
7 7 7
3 3 3
3 3 3
12 12 12
12 12 12
11 11 11
11 11 11
6 6 6
6 6 6
12 12 12
12 12 12
E2-0610 E2-0610 E2-0610
E2-0610 E2-0610 E2-0610
AD_DTBATD_XX AD_D AD_D
AD_DTBATD_XX AD_D AD_D
8 8 8
8 8 8
1 1 1
1 1 1
A4.5 A4.5 A4.5
A4.5 A4.5 A4.5
HEAD HEAD HEAD
HEAD HEAD HEAD
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
E1-1054 E1-1054 E1-1054
E1-1054 E1-1054 E1-1054
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2"
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2"
2"
2"
2"
2"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
4 4 4
4 4 4
8 8 8
8 8 8
6 6 6
6 6 6
3 1/2" 3 1/2" 3 1/2"
3 1/2" 3 1/2" 3 1/2"
20 20 20
20 20 20
NOTE "A" NOTE "A" NOTE "A"
NOTE "A" NOTE "A" NOTE "A"
NOTE A: NOTE A:
NOTE A:
ADI DOES NOT ADI DOES NOT
ADI DOES NOT
RECOMMEND ALLOWING RECOMMEND ALLOWING
RECOMMEND ALLOWING
ANCHOR FASTENERS ANCHOR FASTENERS
ANCHOR FASTENERS
TO PENETRATE LINTEL. TO PENETRATE LINTEL.
TO PENETRATE LINTEL.
COORDINATE COORDINATE
COORDINATE
ANCHORING WITH G.C. ANCHORING WITH G.C.
ANCHORING WITH G.C.
27 27 27
27 27 27
21 21 21
21 21 21
26 26 26
26 26 26
25 25
25
27 27 27
27 27 27
20 20 20
20 20 20
AD_DTBATD_XX AD_D AD_D
AD_DTBATD_XX AD_D AD_D
9 9 9
9 9 9
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL HORIZONTAL
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2"
2"
2"
2"
2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2"
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0020 E2-0020 E2-0020
E2-0020 E2-0020 E2-0020
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
20 20 20
20 20 20
AD_D
AD_D
10
10
1
1
A4.5
A4.5
SILL
SILL
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2"
2"
2"
2"
2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
BE9-2560
BE9-2560
BE9-2560
BE9-2560
BE9-2560
BE9-2560
BE9-2554
BE9-2554
BE9-2554
BE9-2554
BE9-2554
BE9-2554
E1-1054 E1-1054 E1-1054
E1-1054 E1-1054 E1-1054
E9-1015 E9-1015 E9-1015
E9-1015 E9-1015 E9-1015
4 4 4
4 4 4
7 7 7
7 7 7
8 8 8
8 8 8
6 6 6
6 6 6
NOTE "B" NOTE "B" NOTE "B"
NOTE "B" NOTE "B" NOTE "B"
NOTE B: NOTE B: NOTE B:
NOTE B: NOTE B: NOTE B:
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
CONFIGURATION MAY CONFIGURATION MAY CONFIGURATION MAY
CONFIGURATION MAY CONFIGURATION MAY CONFIGURATION MAY
CREATE "EDGE CREATE "EDGE CREATE "EDGE
CREATE "EDGE CREATE "EDGE CREATE "EDGE
DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH
DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING
COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING
WITH G.C. WITH G.C. WITH G.C.
WITH G.C. WITH G.C. WITH G.C.
21 21 21
21 21 21
26 26 26
26 26 26
5 5 5
5 5 5
20
20
25 25 25
25 25 25
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2"
E2-0020 E2-0020 E2-0020
E2-0020 E2-0020 E2-0020
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
20 20
20
AD_DTBATD_XX AD_D AD_D
AD_DTBATD_XX AD_D AD_D
11 11 11
11 11 11
1 1 1
1 1 1
A4.5 A4.5 A4.5
A4.5 A4.5 A4.5
JAMB JAMB JAMB
JAMB JAMB JAMB
BE9-2553 BE9-2553 BE9-2553
BE9-2553 BE9-2553 BE9-2553
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
R.O. R.O. R.O.
R.O. R.O. R.O.
F.S. F.S. F.S.
F.S. F.S. F.S.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
2" 2" 2"
2" 2" 2"
3/8" 3/8" 3/8"
3/8" 3/8" 3/8"
6 6 6
6 6 6
8 8 8
8 8 8
E1-1054
E1-1054
E1-1054
E1-1054
E1-1054
E1-1054
NOTE B: NOTE B: NOTE B:
NOTE B: NOTE B: NOTE B:
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE
CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE CONFIGURATION MAY CREATE
"EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH
"EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH "EDGE DISTANCE" ISSUES WITH
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C.
COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C. COORDINATE ANCHORING WITH G.C.
5 5 5
5 5 5
21 21 21
21 21 21
NOTE "B" NOTE "B" NOTE "B"
NOTE "B" NOTE "B" NOTE "B"
4 4 4
4 4 4
20 20 20
20 20 20
25 25 25
25 25 25
20 20 20
20 20 20
AD_DTBATD_XX AD_D AD_D
AD_DTBATD_XX AD_D AD_D
12 12 12
12 12 12
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
VERTICAL VERTICAL VERTICAL
VERTICAL VERTICAL VERTICAL
BE9-2552 BE9-2552 BE9-2552
BE9-2552 BE9-2552 BE9-2552
BE9-2553 BE9-2553 BE9-2553
BE9-2553 BE9-2553 BE9-2553
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
2" 2" 2"
2" 2" 2"
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
E2-0052 E2-0052 E2-0052
20 20 20
20 20 20
AD_XREFDTL_SHEET
SBE-D13.DWG
13 2
AD_XREFDTL_SHEET
SBE-D14.DWG
14 2
AD_XREFDTL_SHEET
SBE-D15.DWG
15 2
AD_XREFDTL_SHEET
SBE-D16.DWG
16 2
AD_XREFDTL_SHEET
SBE-D17.DWG
17 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
15
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
6" 6"
6" 6" 6"
6" 6" 6" 6"
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH
END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS
(SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES (SEE SKETCHES (SEE SKETCHES
"A-A" AND "B-B" "A-A" AND "B-B"
"A-A" AND "B-B" "A-A" AND "B-B" "A-A" AND "B-B"
"A-A" AND "B-B" "A-A" AND "B-B" "A-A" AND "B-B" "A-A" AND "B-B"
FOR LENGTH INFO) FOR LENGTH INFO)
FOR LENGTH INFO) FOR LENGTH INFO) FOR LENGTH INFO)
FOR LENGTH INFO) FOR LENGTH INFO) FOR LENGTH INFO) FOR LENGTH INFO)
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3 HD2516-W3 HD2516-W3
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
E9-1235 E9-1235
E9-1235 E9-1235 E9-1235
6 6
6 6 6
6 6 6 6
8 8
8 8 8
8 8 8 8
16 16
16 16 16
16 16 16 16
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
E2-0239 E2-0239
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
AD_DTBATD_XX AD_
AD_ AD_DTBATD_XX AD_
13 13
13 13 13
2 2
2 2 2
A3.5 A3.5
A3.5 A3.5 A3.5
HEAD HEAD
HEAD HEAD HEAD
H H H H
3.481"
3.481"
CUSTOM LENGTH END-MULL
C
"F" ANCHOR FOR THE
E9-8698 SPLAY MULLION
CUSTOM LENGTH END-MULL
"T" ANCHOR FOR THE
E9-8698 SPLAY MULLION
31 31
31 31 31
31 31 31 31
24 24
24 24 24
23 23
23 23 23
25 25
25 25 25
28 28
28 28 28
28 28
28 28 28
3 3
3 3 3
22 22
22 22 22
23 23
23 23 23
8 8
8 8 8
6 6
6 6 6
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
75 75
75 75 75
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
AD_DTBATD_XX
A-ANONENONE
SKETCH
AD_D
B-BNONENONE
SKETCH
AD_DTBATD_XX AD_D
AD_D AD_DTBATD_XX AD_D
14 14
14 14 14
NONE NONE
NONE NONE NONE
NONE NONE
NONE NONE NONE
HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONT HORIZONT HORIZONT HORIZONT
6" 6"
6" 6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
E20104 E20104
E20104 E20104 E20104
E20104 E20104 E20104 E20104
AS-1216 AS-1216
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
16 16
16 16 16
16 16 16 16
16 16
16 16 16
16 16 16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
E9-1235 E9-1235
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
AD_D AD_DTBATD_XX
15 152 2A3.5 A3.5
SILL SILL
53 53
53 53 53
53 53 53 53
58 58
58 58 58
58 58 58 58
57 57
57 57 57
57 57 57 57
6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 2 2 2
D.L
.O.
D.L
.O.
E20104 E20104
E20104 E20104 E20104
E9-1235 E9-1235
E9-1235 E9-1235 E9-1235
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
16 16
16 16 16
16 16 16 16
16 16
16 16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.O
R.O
R.O
.
R.O
.
R.O
F F
F.S
.
F.S
.
F
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/
E2-0239 E2-0239
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
CUSTOM LENGTH END CUSTOM LENGTH END
CUSTOM LENGTH END CUSTOM LENGTH END CUSTOM LENGTH END
MULL ANCHORS (SEE MULL ANCHORS (SEE
MULL ANCHORS (SEE MULL ANCHORS (SEE MULL ANCHORS (SEE
SKETCHES @ DETAIL SKETCHES @ DETAIL
SKETCHES @ DETAIL SKETCHES @ DETAIL SKETCHES @ DETAIL
13 FOR MORE INFO) 13 FOR MORE INFO)
13 FOR MORE INFO) 13 FOR MORE INFO) 13 FOR MORE INFO)
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
8 8
8 8 8
6 6
6 6 6
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
8 8
8 8 8
8 8 8 8
6 6
6 6 6
6 6 6 6
25 25
25 25 25
25 25 25 25
28 28
28 28 28
4 4
4 4 4
4 4 4 4
37 37
37 37 37
23 23
23 23 23
3 3
3 3 3
3 3 3 3
AD_D
161 A1.9
JAMB
6 6
6 6 6
6 6 6 6
8 8
8 8 8
8 8 8 8
23 23
23 23 23
23 23 23 23
8 86 6
AS NEEDED AS NEEDED
80° 80°
88.8°± 88.8°±
88.8°± 88.8°± 88.8°±
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
E9-3545 E9-3545
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E2-0120 (2)E2-0120 (2)
E2-0120 (2)E2-0120 (2)
E2-0120 (2)
E2-0120 (2)E2-0120 (2)
E2-0120 (2)E2-0120 (2)
AS-3544 AS-3544
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-8698E9-8698
F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM
F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM
F.S. CHORD DIM. AT FAC F.S. CHORD DIM. AT FAC F.S. CHORD DIM. AT FAC F.S. CHORD DIM. AT FAC
R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM.
R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM.
R.O. CHORD DIM. AT FACE R.O. CHORD DIM. AT FACE R.O. CHORD DIM. AT FACE R.O. CHORD DIM. AT FACE
7/16" 7/16"
7/16" 7/16" 7/16"
7/16" 7/16" 7/16" 7/16"
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
R.D. R.D.
R.D. R.D. R.D.
R.D R.D R.D R.D
2 7/8" 2 7/8"
2 7/8" 2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8" 2 7/8"
6"
6"
24 24
24 24 24
24 24 24 24
31 31
31 31 31
31 31 31 31
RAD
IUS =
249 5/16"
RAD
IUS =
249 5/16"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
22 22
22 22 22
23 23
25 25
25 25 25
28 28
AD_DTBATD_XX AD_D
AD_D AD_DTBATD_XX AD_D
17 17
17 17 17
NONE NONE
NONE NONE NONE
NONE NONE
NONE NONE NONE
SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL
E9-8698 E9-8698
E9-8698 E9-8698 E9-8698
2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O D.L.O D.L.O D.L.O
AS-3544 AS-3544
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2) E2-0120 (2) E2-0120 (2)
E9-3545 E9-3545
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)E2-0120 (2)
E2-0120 (2) E2-0120 (2) E2-0120 (2) E2-0120 (2)
R.D. R.D.
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
170° 170°
170° 170° 170°
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
6"
6"
6"
6"
6"
6"
6"
6"
6"
91° 91°
91° 91° 91°
91° 91° 91° 91°
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
91° 91°
91° 91° 91°
91° 91° 91° 91°
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
AD_XREFDTL_SHEET
SBE-D18.DWG
18 2
AD_XREFDTL_SHEET
SBE-D19.DWG
19 2
AD_XREFDTL_SHEET
SBE-D20.DWG
20 2
AD_XREFDTL_SHEET
SBE-D21.DWG
21 2
AD_XREFDTL_SHEET
SBE-D22.DWG
22 2
AD_XREFDTL_SHEET
SBE-D23.DWG
23 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
16
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
AD_D AD_D AD_D
AD_DTBATD_XX AD_D AD_D
18 18 18
18 18 18
22
2
2 2 2
A3.3A3.3
A3.3
A3.3 A3.3 A3.3
HEAD HEAD HEAD
HEAD HEAD HEAD
HE HE HE HE
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
BE9-2553
E1-1054E1-1054
E1-1054
E1-1054 E1-1054 E1-1054
E1-1054 E1-1054 E1-1054 E1-1054
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
4 1/2"4 1/2"
4 1/2"
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
55
5
5 5 5
44
4
4 4 4
88
8
8 8 8
8 8 8 8
66
6
6 6 6
6 6 6 6
3 1/2" 3 1/2"
3 1/2"
3 1/2" 3 1/2" 3 1/2"
3 1/2" 3 1/2" 3 1/2" 3 1/2"
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
66
6
6 6 6
88
8
8 8 8
2020
20
20 20 20
NOTE "A"NOTE "A"
NOTE "A"
NOTE "A" NOTE "A" NOTE "A"
NOTE A: NOTE A:
ADI DOES NOT ADI DOES NOT
RECOMMEND ALLOWING RECOMMEND ALLOWING
ANCHOR FASTENERS ANCHOR FASTENERS
TO PENETRATE LINTEL. TO PENETRATE LINTEL.
COORDINATE COORDINATE
ANCHORING WITH G.C. ANCHORING WITH G.C.
2727
27
27 27 27
27 27 27 27
2121
21
21 21 21
2626
26
26 26 26
2525
25
AD_D AD_D AD_D
AD_DTBATD_XX AD_D AD_D
19 19 19
19 19 19
NONENONE
NONE
NONE NONE NONE
NONENONE
NONE
NONE NONE NONE
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONT HORIZONT HORIZONT HORIZONT
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2" 2"
2" 2" 2"
2"
2"
2"
2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
4 1/2"4 1/2"
4 1/2"
4 1/2" 4 1/2" 4 1/2"
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
E9-1015
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
BE9-2556
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0020E2-0020
E2-0020
E2-0020 E2-0020 E2-0020
E2-0020 E2-0020 E2-0020 E2-0020
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
AD_D AD_D
20 203 3A3.3 A3.3
SILL SILL
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
2"
2"
2"
2"
2"
2"
2"
2"
2"
2"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
BE9-2560BE9-2560
BE9-2560
BE9-2560 BE9-2560 BE9-2560
BE9-2554
BE9-2554
BE9-2554
BE9-2554
BE9-2554
BE9-2554
E1-1054E1-1054
E1-1054
E1-1054 E1-1054 E1-1054
E1-1054 E1-1054 E1-1054 E1-1054
E9-1015E9-1015
E9-1015
E9-1015 E9-1015 E9-1015
E9-1015 E9-1015 E9-1015 E9-1015
44
4
4 4 4
77
7
7 7 7
88
8
8 8 8
8 8 8 8
66
6
6 6 6
6 6 6 6
NOTE "B"NOTE "B"
NOTE "B"
NOTE "B" NOTE "B" NOTE "B"
NOTE B:NOTE B:
NOTE B:
NOTE B: NOTE B: NOTE B:
NOTE B: NOTE B: NOTE B: NOTE B:
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION PERIMETER CONDITION
CONFIGURATION MAY CONFIGURATION MAY
CONFIGURATION MAY
CONFIGURATION MAY CONFIGURATION MAY CONFIGURATION MAY
CONFIGURATION MAY CONFIGURATION MAY CONFIGURATION MAY CONFIGURATION MAY
CREATE "EDGE CREATE "EDGE CREATE "EDGE
CREATE "EDGE CREATE "EDGE CREATE "EDGE
CREATE "EDGE CREATE "EDGE CREATE "EDGE CREATE "EDGE
DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH
DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH
DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH DISTANCE" ISSUES WITH
ANCHORING FASTENERS. ANCHORING FASTENERS.
ANCHORING FASTENERS.
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS. ANCHORING FASTENERS.
COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING
COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING
COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING COORDINATE ANCHORING
WITH G.C.WITH G.C.
WITH G.C.
WITH G.C. WITH G.C. WITH G.C.
WITH G.C. WITH G.C. WITH G.C. WITH G.C.
2121
21
21 21 21
21 21 21 21
2626
26
26 26 26
26 26 26 26
55
5
5 5 5
5 5 5 5
2020
20
20 20 20
2525
25
25 25 25
25 25 25 25
4 1/2" 4 1/2"
4 1/2"
4 1/2" 4 1/2" 4 1/2"
E2-0020E2-0020
E2-0020
E2-0020 E2-0020 E2-0020
E2-0020 E2-0020 E2-0020 E2-0020
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
E2-0052
66
6
6 6 6
88
8
8 8 8
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
AD_D
214A3.2
H H H
HEAD H H
E1-1207 OR E1-1207 OR
E1-1207 OR
E1-1207 OR E1-1207 OR E1-1207 OR
E1-1207 E1-1207 E1-1207 E1-1207
E1-1232E1-1232
E1-1232
E1-1232 E1-1232 E1-1232
E1-1232 E1-1232 E1-1232 E1-1232
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
6"6"
6"
6" 6" 6"
6" 6" 6" 6"
E9-1206E9-1206
E9-1206
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2
1/2
1/2
1/2
HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3 HD2516-W3 HD2516-W32 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
E9-12E9-12
E9-12
E9-1235 E9-123 E9-12
66
6
6 6 6
6 6 6 6
88
8
8 8 8
8 8 8 8
1616
16
16 16 16
16 16 16 16
AS-3569 W/AS-3569 W/
AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
E2-0239E2-0239
E2-0239
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
8 8
66
6
6 6 6
AS NEED AS NEED AS NEED
AS NEEDED AS NEED AS NEED
75 7
E1-3503 E1-3503
E1-3503
E1-3503 W/ E1-3503 W E1-3503 W
(2) HF-2510 (2) HF-2510 (2) HF-2510
(2) HF-2510 & (2) HF-2510 (2) HF-2510
(2) FC-12 (2) FC-12 (2) FC-12
(2) FC-1220 (2) FC-122 (2) FC-12
2727
27
27 27 27
27 27 27 27
22
2
2 2 220
CANOPY FRAMING CANOPY FRAMING
CANOPY FRAMING
CANOPY FRAMING CANOPY FRAMING CANOPY FRAMING
BY OTHERSBY OTHERS
BY OTHERS
BY OTHERS BY OTHERS BY OTHERS
2121
21
21 21 21
2727
27
27 27 27
AD_D AD_D AD_D
AD_DTBATD_XX AD_D AD_D
22 22 22
22 22 22
NONENONE
NONE
NONE NONE NONE
NONENONE
NONE
NONE NONE NONE
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONT HORIZONT HORIZONT HORIZONT
6"6"
6"
6" 6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
E20104E20104
E20104
E20104 E20104 E20104
E20104 E20104 E20104 E20104
AS-1216AS-1216
AS-1216
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
HM2516-W3HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
E9-1206E9-1206
E9-1206
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
1616
16
16 16 16
16 16 16 16
1616
16
16 16 16
16 16 16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1235E9-1235
E9-1235
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E1-3503 W/ E1-3503 W/
E1-3503 W/
E1-3503 W/ E1-3503 W/ E1-3503 W/
E1-3503 W/ E1-3503 W/ E1-3503 W/ E1-3503 W/
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
AD_D AD_D AD_D
AD_DTBATD_XX AD_D AD_D
23 23 23
23 23 23
33
3
3 3 3
A3.4A3.4
A3.4
A3.4 A3.4 A3.4
SILL SILL SILL
SILL SILL SILL
6"6"
6"
6" 6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D D D D
E20104E20104
E20104
E20104 E20104 E20104
E20104 E20104 E20104 E20104
HM2516-W3HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
E9-1206E9-1206
E9-1206
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
7575
75
75 75 75
1616
16
16 16 16
16 16 16 16
1616
16
16 16 16
16 16 16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
E1-1207 OR E1-1207 OR
E1-1207 OR
E1-1207 OR E1-1207 OR E1-1207 OR
E1-1207 OR E1-1207 OR E1-1207 OR E1-1207 OR
E1-1232E1-1232
E1-1232
E1-1232 E1-1232 E1-1232
E1-1232 E1-1232 E1-1232 E1-1232
88
8
8 8 8
8 8 8 8
66
6
6 6 6
6 6 6 6
44
4
4 4 4
4 4 4 4
AS-3569 W/AS-3569 W/
AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
E2-0239E2-0239
E2-0239
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
2929
29
29 29 29
E9-1235E9-1235
E9-1235
E9-1235 E9-1235 E9-1235
88
8
8 8 8
66
6
6 6 6
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
E1-3501 W/ E1-3501 W/
E1-3501 W/
E1-3501 W/ E1-3501 W/ E1-3501 W/
(2) HM-2556 (2) HM-2556 (2) HM-2556
(2) HM-2556 (2) HM-2556 (2) HM-2556
& (2) FC-1220 & (2) FC-1220 & (2) FC-1220
& (2) FC-1220 & (2) FC-1220 & (2) FC-1220
11
1
1 1 1
1 1 1 1
3636
36
36 36 36
36 36 36 36
2929
29
29 29 29
29 29 29 29
AD_XREFDTL_SHEET
SBE-D24.DWG
24 2
AD_XREFDTL_SHEET
SBE-D25.DWG
25 2
AD_XREFDTL_SHEET
SBE-D26.DWG
26 2
AD_XREFDTL_SHEET
SBE-D27.DWG
27 2
AD_XREFDTL_SHEET
SBE-D28.DWG
28 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
17
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
AD_XREFDTL_SHEET
SBE-D29.DWG
29 2
6"
6"
6"
6"
6" 6"
R.O. R.O. R.O.
R.O. R.O.
R.O. R.O. R.O. R.O.
R.O.
F.S. F.S. F.S.
F.S. F.S.
F.S. F.S. F.S. F.S.
F.S.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O D.L.O D.L.O D.L.O
D.L.O.
2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2"
1/2" 1/2" 1/2"
1/2" 1/2"
1/2" 1/2" 1/2" 1/2"
1/2"
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
AS-3569 AS-3569 AS-3569
AS-3569 AS-3569
AS-3569 AS-3569 AS-3569 AS-3569
AS-3569
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
E2-0239
AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX
24 24 24
24 24
24 24 24 24
24
1 1 1
1 1
1 1 1 1
1
A4.5 A4.5 A4.5
A4.5 A4.5
A4.5 A4.5 A4.5 A4.5
A4.5
JAMB JAMB JAMB
JAMB JAMB
JAMB JAMB JAMB JAMB
JAMB
6 6 6
6 6
6 6 6 6
6
8 8 8
8 8
8 8 8 8
8
21 21 21
21 21
21 21 21 21
21
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
6 6 6
6 6 6
8 8 8
8 8 8
4 4 4
4 4 4
20 20 20
20 20
20 20 20 20
20
25 25 25
25 25
25 25 25 25
25
AD_D AD_D AD_D
AD_DTBATD_XX AD_D AD_D
25 25 25
25 25 25
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
VERTICAL VERTICAL VERTICAL
VERTICAL VERTICAL
VERTIC VERTIC VERTIC VERTIC
VERTICAL
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX
262 A1.5
VERTICAL
VERTICAL VERTICAL
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
6"
6"
6"
6"
6"
6"
7 7 7
7 7 7
11 11 11
11 11 11
10 10 10
10 10 10
7
7 7
11 11 11
11 11 11
10 10 10
10 10 10
64 64 64
64 64 64
14 14 14
14 14 14
14
14 14
64 64 64
64 64 64
25
23
23 23
28
AD_D
2710S4.1
H H H
HEAD H
E1-1207 OR E1-1207 OR E1-1207 OR
E1-1207 OR E1-1207 OR
E1-1207 E1-1207 E1-1207 E1-1207
E1-1207 OR
E1-1232 E1-1232 E1-1232
E1-1232 E1-1232
E1-1232 E1-1232 E1-1232 E1-1232
E1-1232
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
6" 6" 6"
6" 6"
6" 6" 6" 6"
6"
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
E9-12 E9-12 E9-12
E9-1235 E9-12 E9-12
6 6 6
6 6
6 6 6 6
6
8 8 8
8 8
8 8 8 8
8
16 16 16
16 16
16 16 16 16
16
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
E2-0239
8
6 6 6
6 6 6
AS NEED AS NEED AS NEED
AS NEEDED AS NEED AS NEED
75 7
E1-3503 E1-3503 E1-3503
E1-3503 W/ E1-3503 E1-3503 W
(2) HF-2510 (2) HF-2510 (2) HF-2510
(2) HF-2510 & (2) HF-2510 (2) HF-2510
(2) FC-12 (2) FC-12 (2) FC-12
(2) FC-1220 (2) FC-12 (2) FC-12
27 27 27
27 27
27 27 27 27
27
26 26 26
26 26 26
21 21 21
21 21 21
25 25 25
25 25 25
2 2 2
2 2 2
27 27 27
27 27 27
20
AD_D AD_D AD_D
AD_DTBATD_XX AD_D AD_D
28 28 28
28 28 28
H6 H6 H6
H6 H6 H6
A4.3 A4.3 A4.3
A4.3 A4.3 A4.3
DOOR DOOR DOOR
DOOR DOOR DOOR
HEAD HEAD HEAD
HEAD HEAD HEAD
AS-0402 AS-0402 AS-0402
AS-0402 AS-0402
AS-0402 AS-0402 AS-0402 AS-0402
AS-0402
E2-
E2-
E2-0120
E2
E2-0120
E2-0120
E20104 E20104 E20104
E20104 E20104 E20104
6"
6" 6"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.L
.O.
D.L
.O.
D.L
.O.
E9-1235
E9-1235
E9-1235
E9-1235
E9-1235
E9-1235
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
16 16 16
16 16
16 16 16 16
16
16
16 16
E2-
E2-
E2-0120
E2
E2-0120
E2-0120
E9-1253 E9-1253 E9-1253
E9-1253 E9-1253 E9-1253
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4"
1 3/4" 1 3/4" 1 3/4" 1 3/4"
1 3/4"
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
4 1/2"
E1-3503 W/
E1-3503 W/ E1-3503 W/
(2) HF-2510
(2) HF-2510 (2) HF-2510
& (2) FC-1220
& (2) FC-1220 & (2) FC-1220
8 8 8
8 8
8 8 8 8
8
6 6 6
6 6
6 6 6 6
6
6 6 6
6 6 6
8 8 8
8 8 8
4 4 4
4 4
4 4 4 4
4
3 3 3
3 3
3 3 3 3
3
1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4"
1 3/4" 1 3/4" 1 3/4" 1 3/4"
1 3/4"
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
4 1/2"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
9/16"
9/16"
9/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
3/16"
3/16"
3/16"
3/16"
3/16"
3/16"
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R R R R
R.O
.
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
F.S
. (AT
DOOR
F.S
. (AT
DOOR
F.S
. (AT
DOOR
F.S
. (AT
DOOR
FRAME ONLY
)
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D D D D
D.O
.
5" 5" 5"
5" 5"
5" 5" 5" 5"
5"
29 29 29
29 29
29 29 29 29
29
29 29 29
29 29 29
7 7 7
7 7
7 7 7 7
7
7 7 7
7 7
7 7 7 7
7
1 1 1
1 1
1 1 1 1
1
36 36 36
36 36
36 36 36 36
36
55 55 55
55 55
55 55 55 55
55
6"
6" 6"
AD_D
AD_D AD_D
29
29 29
NONE
NONE NONE
NONE
NONE NONE
DOOR
DOOR DOOR
SILL
SILL SILL
AD_XREFDTL_SHEET
SBE-D30.DWG
30 2
AD_XREFDTL_SHEET
SBE-D31.DWG
31 2
AD_XREFDTL_SHEET
SBE-D32.DWG
32 2
AD_XREFDTL_SHEET
SBE-D33.DWG
33 2
AD_XREFDTL_SHEET
SBE-D34.DWG
34 2
AD_XREFDTL_SHEET
SBE-D35.DWG
35 2
AD_XREFDTL_SHEET
SBE-D36.DWG
36 2
AD_XREFDTL_SHEET
SBE-D37.DWG
37 2
AD_XREFDTL_SHEET
SBE-D38.DWG
38 2
AD_XREFDTL_SHEET
SBE-D39.DWG
39 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
18
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
30 30 30 30
30 30
30 30
30 30
J6 J6 J6 J6
J6 J6
J6 J6
J6 J6
A4.3 A4.3 A4.3 A4.3
A4.3 A4.3
A4.3 A4.3
A4.3 A4.3
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR DOOR
DOOR DOOR
JAMB JAMB JAMB JAMB
JAMB JAMB
JAMB JAMB
JAMB JAMB
6 6 6 6
6 6
6 6
6 6
8 8 8 8
8 8
8 8
8 8
21 21 21 21
21 21
21 21
21 21
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
6 6 6 6
6 6
6 6
6 6
8 8 8 8
8 8
8 8
8 8
20 20 20 20
20 20
20 20
20 20
25 25 25 25
25 25
25 25
25 25
AS-0417 AS-0417 AS-0417 AS-0417
AS-0417 AS-0417
AS-0417 AS-0417
AS-0417 AS-0417
E9-3513 E9-3513 E9-3513 E9-3513
E9-3513 E9-3513
E9-3513 E9-3513
E9-3513 E9-3513
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
R.O. R.O. R.O. R.O.
R.O. R.O.
R.O. R.O.
R.O. R.O.
F.S. F.S. F.S. F.S.
F.S. F.S.
F.S. F.S.
F.S. F.S.
D.O. D.O. D.O. D.O.
D.O. D.O.
D.O. D.O.
D.O. D.O.
3 3/8" 3 3/8" 3 3/8" 3 3/8"
3 3/8" 3 3/8"
3 3/8" 3 3/8"
3 3/8" 3 3/8"
1/2" 1/2" 1/2" 1/2"
1/2" 1/2"
1/2" 1/2"
1/2" 1/2"
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
AS-3569 AS-3569 AS-3569 AS-3569
AS-3569 AS-3569
AS-3569 AS-3569
AS-3569 AS-3569
W/E2-0239 W/E2-0239 W/E2-0239 W/E2-0239
W/E2-0239 W/E2-0239
W/E2-0239 W/E2-0239
W/E2-0239 W/E2-0239
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
5" 5" 5" 5"
5" 5"
5" 5"
5" 5"
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
9/16" 9/16" 9/16" 9/16"
9/16" 9/16"
9/16" 9/16"
9/16" 9/16"
1/8" 1/8" 1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2"
7/8" 7/8" 7/8" 7/8"
7/8" 7/8"
7/8" 7/8"
7/8" 7/8" E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
4 4 4 4
4 4
4 4
4 4
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
31 31 31 31
31 31
31 31
31 31
J5 J5 J5 J5
J5 J5
J5 J5
J5 J5
A4.3 A4.3 A4.3 A4.3
A4.3 A4.3
A4.3 A4.3
A4.3 A4.3
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR DOOR
DOOR DOOR
JAMB JAMB JAMB JAMB
JAMB JAMB
JAMB JAMB
JAMB JAMB
AS-0417 AS-0417 AS-0417 AS-0417
AS-0417 AS-0417
AS-0417 AS-0417
AS-0417 AS-0417
E9-3513 E9-3513 E9-3513 E9-3513
E9-3513 E9-3513
E9-3513 E9-3513
E9-3513 E9-3513
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
D.O. D.O. D.O. D.O.
D.O. D.O.
D.O. D.O.
D.O. D.O.
3 3/8" 3 3/8" 3 3/8" 3 3/8"
3 3/8" 3 3/8"
3 3/8" 3 3/8"
3 3/8" 3 3/8"
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
5" 5" 5" 5"
5" 5"
5" 5"
5" 5"
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
9/16" 9/16" 9/16" 9/16"
9/16" 9/16"
9/16" 9/16"
9/16" 9/16"
1/8" 1/8" 1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2"
7/8" 7/8" 7/8" 7/8"
7/8" 7/8"
7/8" 7/8"
7/8" 7/8"
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
E1-
1203 &
(2) FC-12
12
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
32 32 32 32
32 32
32 32
32 32
2 2 2 2
2 2
2 2
2 2
A3.2 A3.2 A3.2 A3.2
A3.2 A3.2
A3.2 A3.2
A3.2 A3.2
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
HEAD HEAD
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
6" 6" 6" 6"
6" 6"
6" 6"
6" 6"
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
HD2516-W3 HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
6 6 6 6
6 6
6 6
6 6
16 16 16 16
16 16
16 16
16 16
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
75 75 75 75
75 75
75 75
75 75
27 27 27 27
27 27
27 27
27 27
26 26 26 26
26 26
26 26
26 26
21 21 21 21
21 21
21 21
21 21
25 25 25 25
25 25
25 25
25 25
2 2 2 2
2 2
2 2
2 2
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1223 E9-1223 E9-1223 E9-1223
E9-1223 E9-1223
E9-1223 E9-1223
E9-1223 E9-1223
NOTE: NOTE: NOTE: NOTE:
NOTE: NOTE:
NOTE: NOTE:
NOTE: NOTE:
SEE FRONT VIEW SEE FRONT VIEW SEE FRONT VIEW SEE FRONT VIEW
SEE FRONT VIEW SEE FRONT VIEW
SEE FRONT VIEW SEE FRONT VIEW
SEE FRONT VIEW SEE FRONT VIEW
DETAILS FOR DETAILS FOR DETAILS FOR DETAILS FOR
DETAILS FOR DETAILS FOR
DETAILS FOR DETAILS FOR
DETAILS FOR DETAILS FOR
CUSTOM MITERED CUSTOM MITERED CUSTOM MITERED CUSTOM MITERED
CUSTOM MITERED CUSTOM MITERED
CUSTOM MITERED CUSTOM MITERED
CUSTOM MITERED CUSTOM MITERED
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
INFORMATION. INFORMATION. INFORMATION. INFORMATION.
INFORMATION. INFORMATION.
INFORMATION. INFORMATION.
INFORMATION. INFORMATION.
27 27 27 27
27 27
27 27
27 27
20 20 20 20
20 20
20 20
20 20
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
33 33 33 33
33 33
33 33
33 33
4 4 4 4
4 4
4 4
4 4
A3.2 A3.2 A3.2 A3.2
A3.2 A3.2
A3.2 A3.2
A3.2 A3.2
SILL SILL SILL SILL
SILL SILL
SILL SILL
SILL SILL
6" 6" 6" 6"
6" 6"
6" 6"
6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
E20104 E20104 E20104 E20104
E20104 E20104
E20104 E20104
E20104 E20104
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
75 75 75 75
75 75
75 75
75 75
16 16 16 16
16 16
16 16
16 16
16 16 16 16
16 16
16 16
16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
E1-1207 OR E1-1207 OR E1-1207 OR E1-1207 OR
E1-1207 OR E1-1207 OR
E1-1207 OR E1-1207 OR
E1-1207 OR E1-1207 OR
E1-1232 E1-1232 E1-1232 E1-1232
E1-1232 E1-1232
E1-1232 E1-1232
E1-1232 E1-1232
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
4 4 4 4
4 4
4 4
4 4
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
E2-0239 E2-0239 E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
E1-3501 W/ E1-3501 W/ E1-3501 W/ E1-3501 W/
E1-3501 W/ E1-3501 W/
E1-3501 W/ E1-3501 W/
E1-3501 W/ E1-3501 W/
(2) HM-2556 (2) HM-2556 (2) HM-2556 (2) HM-2556
(2) HM-2556 (2) HM-2556
(2) HM-2556 (2) HM-2556
(2) HM-2556 (2) HM-2556
& (2) FC-1220 & (2) FC-1220 & (2) FC-1220 & (2) FC-1220
& (2) FC-1220 & (2) FC-1220
& (2) FC-1220 & (2) FC-1220
& (2) FC-1220 & (2) FC-1220
21 21 21 21
21 21
21 21
21 21
26 26 26 26
26 26
26 26
26 26
2 2 2 2
2 2
2 2
2 2
27 27 27 27
27 27
27 27
27 27
20 20 20 20
20 20
20 20
20 20
25 25 25 25
25 25
25 25
25 25
21 21 21 21
21 21
21 21
21 21
LINE OF LINE OF LINE OF LINE OF
LINE OF LINE OF
LINE OF LINE OF
LINE OF LINE OF
R.O. R.O. R.O. R.O.
R.O. R.O.
R.O. R.O.
R.O. R.O.
VERTICAL VERTICAL VERTICAL VERTICAL
VERTICAL VERTICAL
VERTICAL VERTICAL
VERTICAL VERTICAL
MULLIONI MULLIONI MULLIONI MULLIONI
MULLIONI MULLIONI
MULLIONI MULLIONI
MULLIONI MULLIONI
FC-1220 FC-1220 FC-1220 FC-1220
FC-1220 FC-1220
FC-1220 FC-1220
FC-1220 FC-1220
HF-2510 HF-2510 HF-2510 HF-2510
HF-2510 HF-2510
HF-2510 HF-2510
HF-2510 HF-2510
63 63 63 63
63 63
63 63
63 63
72° 72° 72° 72°
72° 72°
72° 72°
72° 72°
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
CURVED CURVED CURVED CURVED
CURVED CURVED
CURVED CURVED
CURVED CURVED
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
HEAD HEAD
MULLION MULLION MULLION MULLION
MULLION MULLION
MULLION MULLION
MULLION MULLION
AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX
34 34 34 34
34 34
34 34
34 34
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE
FRONT VIEW FRONT VIEW FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
35 35 35 35
35 35
35 35
35 35
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE
FRONT VIEW FRONT VIEW FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
HF-2510 HF-2510 HF-2510 HF-2510
HF-2510 HF-2510
HF-2510 HF-2510
HF-2510 HF-2510
FC-1220 FC-1220 FC-1220 FC-1220
FC-1220 FC-1220
FC-1220 FC-1220
FC-1220 FC-1220
LINE OF LINE OF LINE OF LINE OF
LINE OF LINE OF
LINE OF LINE OF
LINE OF LINE OF
R.O. R.O. R.O. R.O.
R.O. R.O.
R.O. R.O.
R.O. R.O.
VERTICAL VERTICAL VERTICAL VERTICAL
VERTICAL VERTICAL
VERTICAL VERTICAL
VERTICAL VERTICAL
MULLIONI MULLIONI MULLIONI MULLIONI
MULLIONI MULLIONI
MULLIONI MULLIONI
MULLIONI MULLIONI
CURVED CURVED CURVED CURVED
CURVED CURVED
CURVED CURVED
CURVED CURVED
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
HEAD HEAD
MULLION MULLION MULLION MULLION
MULLION MULLION
MULLION MULLION
MULLION MULLION
63 63 63 63
63 63
63 63
63 63
FC-1220 FC-1220 FC-1220 FC-1220
FC-1220 FC-1220
FC-1220 FC-1220
FC-1220 FC-1220
HF-2510 HF-2510 HF-2510 HF-2510
HF-2510 HF-2510
HF-2510 HF-2510
HF-2510 HF-2510
63 63 63 63
63 63
63 63
63 63
CURVED CURVED CURVED CURVED
CURVED CURVED
CURVED CURVED
CURVED CURVED
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
HEAD HEAD
MULLION MULLION MULLION MULLION
MULLION MULLION
MULLION MULLION
MULLION MULLION
ANGLE ANGLE ANGLE ANGLE
ANGLE ANGLE
ANGLE ANGLE
ANGLE ANGLE
VARIES VARIES VARIES VARIES
VARIES VARIES
VARIES VARIES
VARIES VARIES
ANGLE ANGLE ANGLE ANGLE
ANGLE ANGLE
ANGLE ANGLE
ANGLE ANGLE
VARIES VARIES VARIES VARIES
VARIES VARIES
VARIES VARIES
VARIES VARIES
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
6" 6" 6" 6"
6" 6"
6" 6"
6" 6"
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH
END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS
(SEE SKETCHES (SEE SKETCHES (SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES
"A-A" AND "B-B" @ "A-A" AND "B-B" @ "A-A" AND "B-B" @ "A-A" AND "B-B" @
"A-A" AND "B-B" @ "A-A" AND "B-B" @
"A-A" AND "B-B" @ "A-A" AND "B-B" @
"A-A" AND "B-B" @ "A-A" AND "B-B" @
DETAIL 13 FOR DETAIL 13 FOR DETAIL 13 FOR DETAIL 13 FOR
DETAIL 13 FOR DETAIL 13 FOR
DETAIL 13 FOR DETAIL 13 FOR
DETAIL 13 FOR DETAIL 13 FOR
LENGTH INFO) LENGTH INFO) LENGTH INFO) LENGTH INFO)
LENGTH INFO) LENGTH INFO)
LENGTH INFO) LENGTH INFO)
LENGTH INFO) LENGTH INFO)
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
HD2516-W3 HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
6 6 6 6
6 6
6 6
6 6
8 8 8 8
8 8
8 8
8 8
16 16 16 16
16 16
16 16
16 16
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
E2-0239 E2-0239 E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
36 36 36 36
36 36
36 36
36 36
4 4 4 4
4 4
4 4
4 4
A3.5 A3.5 A3.5 A3.5
A3.5 A3.5
A3.5 A3.5
A3.5 A3.5
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
HEAD HEAD
31 31 31 31
31 31
31 31
31 31
23 23 23 23
23 23
23 23
23 23
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
75 75 75 75
75 75
75 75
75 75
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
76 76 76 76
76 76
76 76
76 76
24 24 24 24
24 24
24 24
24 24
28 28 28 28
28 28
28 28
28 28
25 25 25 25
25 25
25 25
25 25
76 76 76 76
76 76
76 76
76 76
3 3 3 3
3 3
3 3
3 3
CUSTOM LENGTH END CUSTOM LENGTH END CUSTOM LENGTH END CUSTOM LENGTH END
CUSTOM LENGTH END CUSTOM LENGTH END
CUSTOM LENGTH END CUSTOM LENGTH END
CUSTOM LENGTH END CUSTOM LENGTH END
MULL ANCHORS (SEE MULL ANCHORS (SEE MULL ANCHORS (SEE MULL ANCHORS (SEE
MULL ANCHORS (SEE MULL ANCHORS (SEE
MULL ANCHORS (SEE MULL ANCHORS (SEE
MULL ANCHORS (SEE MULL ANCHORS (SEE
SKETCHES @ DETAIL SKETCHES @ DETAIL SKETCHES @ DETAIL SKETCHES @ DETAIL
SKETCHES @ DETAIL SKETCHES @ DETAIL
SKETCHES @ DETAIL SKETCHES @ DETAIL
SKETCHES @ DETAIL SKETCHES @ DETAIL
13 FOR MORE INFO) 13 FOR MORE INFO) 13 FOR MORE INFO) 13 FOR MORE INFO)
13 FOR MORE INFO) 13 FOR MORE INFO)
13 FOR MORE INFO) 13 FOR MORE INFO)
13 FOR MORE INFO) 13 FOR MORE INFO)
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
37 37 37 37
37 37
37 37
37 37
4 4 4 4
4 4
4 4
4 4
A3.5 A3.5 A3.5 A3.5
A3.5 A3.5
A3.5 A3.5
A3.5 A3.5
SILL SILL SILL SILL
SILL SILL
SILL SILL
SILL SILL
6" 6" 6" 6"
6" 6"
6" 6"
6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
E20104 E20104 E20104 E20104
E20104 E20104
E20104 E20104
E20104 E20104
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
75 75 75 75
75 75
75 75
75 75
16 16 16 16
16 16
16 16
16 16
16 16 16 16
16 16
16 16
16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
4 4 4 4
4 4
4 4
4 4
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
E2-0239 E2-0239 E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
29 29 29 29
29 29
29 29
29 29
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
1 1 1 1
1 1
1 1
1 1
36 36 36 36
36 36
36 36
36 36
29 29 29 29
29 29
29 29
29 29
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
AD_D AD_D AD_D AD_D
AD_D AD_D
AD_D AD_D
AD_D AD_D
38 38 38 38
38 38
38 38
38 38
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR DOOR
DOOR DOOR
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
HEAD HEAD
AS-0402 AS-0402 AS-0402 AS-0402
AS-0402 AS-0402
AS-0402 AS-0402
AS-0402 AS-0402
E2-
E2-
E2-
E2-
E2-
E2-
E2-
E2-
E2-0120
E2-0120
E20104 E20104 E20104 E20104
E20104 E20104
E20104 E20104
E20104 E20104
6" 6"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.L
.O.
D.L
.O.
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
16 16 16 16
16 16
16 16
16 16
16 16
E2-
E2-
E2-
E2-
E2-
E2-
E2-
E2-
E2-0120
E2-0120
E9-1253 E9-1253 E9-1253 E9-1253
E9-1253 E9-1253
E9-1253 E9-1253
E9-1253 E9-1253
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
1 3/4" 1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4"
1 3/4" 1 3/4"
1 3/4" 1 3/4"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2"
4 1/2" 4 1/2"
4 1/2" 4 1/2"
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
6 6 6 6
6 6
6 6
6 6
8 8 8 8
8 8
8 8
8 8
4 4 4 4
4 4
4 4
4 4
3 3 3 3
3 3
3 3
3 3
AD_D AD_D
39 39NONE NONENONE NONE
JAMB JAMB
6 6 6 6
6 6
6 6
6 6
8 8 8 8
8 8
8 8
8 8
8 8 8 8
8 8
8 8
8 8
6 6 6 6
6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545 E9-3545
E9-3545 E9-3545
E9-3545 E9-3545
E2-0120 (2) E2-0120 (2) E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544 AS-3544
AS-3544 AS-3544
AS-3544 AS-3544
E9-8698E9-8698
E9-8698E9-8698
E9-8698E9-8698
E9-8698E9-8698
E9-8698E9-8698
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
RAD
IUS =
383 1/
RAD
IUS =
383 1/
RAD
IUS =
383 1/
RAD
IUS =
383 1/
RAD
IUS =
383 1/
RAD
IUS =
383 1/
RAD
IUS =
383 1/
RAD
IUS =
383 1/
RAD
IUS =
383 1/2"
RAD
IUS =
383 1/2"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
R.D. R.D.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8"
2 7/8" 2 7/8"
2 7/8" 2 7/8"
89.7°± 89.7°± 89.7°± 89.7°±
89.7°± 89.7°±
89.7°± 89.7°±
89.7°± 89.7°±
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
94° 94°
10 10 10 10
10 10
10 10
10 10
14 14 14 14
14 14
14 14
14 14
20 20
AD_XREFDTL_SHEET
SBE-D40.DWG
40 2
AD_XREFDTL_SHEET
SBE-D41.DWG
41 2
AD_XREFDTL_SHEET
SBE-D42.DWG
42 2
AD_XREFDTL_SHEET
SBE-D43.DWG
43 2
AD_XREFDTL_SHEET
SBE-D44.DWG
44 2
AD_XREFDTL_SHEET
SBE-D45.DWG
45 2
AD_XREFDTL_SHEET
SBE-D46.DWG
46 2
AD_XREFDTL_SHEET
SBE-D47.DWG
47 2
AD_XREFDTL_SHEET
SBE-D48.DWG
48 2
AD_XREFDTL_SHEET
SBE-D49.DWG
49 2
AD_XREFDTL_SHEET
SBE-D50.DWG
50 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
19
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
40 40 40
40 40 40 40
40 40
40 40
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698 E9-8698
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8"
2 7/8" 2 7/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544 AS-3544
AS-3544 AS-3544
E2-0120 (2) E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2) E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545 E9-3545
E9-3545 E9-3545
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E2-0120 (2) E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2) E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)
E2-0120 (2) E2-0120 (2)
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
173°± 173°± 173°±
173°± 173°± 173°± 173°±
173°± 173°±
173°± 173°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
89.5°± 89.5°± 89.5°±
89.5°± 89.5°± 89.5°± 89.5°±
89.5°± 89.5°±
89.5°± 89.5°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
89.5°± 89.5°± 89.5°±
89.5°± 89.5°± 89.5°± 89.5°±
89.5°± 89.5°±
89.5°± 89.5°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698 E9-8698
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8"
2 7/8" 2 7/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
E2-0120 (2)E2-0120 (2)
E2-0120 (2)
E2-0120 (2)E2-0120 (2)
E2-0120 (2)E2-0120 (2)
E2-0120 (2)E2-0120 (2)
E2-0120 (2)E2-0120 (2)
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545 E9-3545
E9-3545 E9-3545
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544 AS-3544
AS-3544 AS-3544
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
41 41 41
41 41 41 41
41 41
41 41
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
DOOR DOOR DOOR
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR DOOR
JAMB JAMB JAMB
JAMB JAMB JAMB JAMB
JAMB JAMB
JAMB JAMB
6 6 6
6 6 6 6
6 6
6 6
8 8 8
8 8 8 8
8 8
8 8
AS-0417 AS-0417 AS-0417
AS-0417 AS-0417 AS-0417 AS-0417
AS-0417 AS-0417
AS-0417 AS-0417
E9-2344 E9-2344 E9-2344
E9-2344 E9-2344 E9-2344 E9-2344
E9-2344 E9-2344
E9-2344 E9-2344
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2" 4 1/2"
4 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4" 1 3/4"
1 3/4"
D.O. D.O. D.O.
D.O. D.O. D.O. D.O.
D.O. D.O.
D.O. D.O.
5" 5" 5"
5" 5" 5" 5"
5" 5"
5" 5"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
9/16" 9/16" 9/16"
9/16" 9/16" 9/16" 9/16"
9/16" 9/16"
9/16" 9/16"
1/8" 1/8" 1/8"
1/8" 1/8" 1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
170°± 170°± 170°±
170°± 170°± 170°± 170°±
170°± 170°±
170°± 170°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
91°± 91°± 91°±
91°± 91°± 91°± 91°±
91°± 91°±
91°± 91°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
4 4 4
4 4 4 4
4 4
4 4
1" 1" 1"
1" 1" 1" 1"
1" 1"
1" 1"
3/4" 3/4" 3/4"
3/4" 3/4" 3/4" 3/4"
3/4" 3/4"
3/4" 3/4"
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
6 6 6
6 6 6 6
6 6
6 6
8 8 8
8 8 8 8
8 8
8 8
AD_D
42NONENONE
DOORJAMB
AS-0417 AS-0417 AS-0417
AS-0417 AS-0417 AS-0417 AS-0417
AS-0417 AS-0417
AS-0417 AS-0417
E9-3513 E9-3513 E9-3513
E9-3513 E9-3513 E9-3513 E9-3513
E9-3513 E9-3513
E9-3513 E9-3513
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2" 4 1/2"
4 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4" 1 3/4"
1 3/4"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
D.O D.O D.O.
D.O D.O D.O. D.O.
D.O. D.O.
D.O D.O
4 1/4" 4 1/4" 4 1/4"
4 1/4" 4 1/4" 4 1/4" 4 1/4"
4 1/4" 4 1/4"
4 1/4" 4 1/4"
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
5" 5" 5"
5" 5" 5" 5"
5" 5"
5" 5"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
9/16" 1/8" 1/8" 1/8"
1/8" 1/8" 1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2"
2 1/2" 2 1/2"
7/8" 7/8" 7/8"
7/8" 7/8" 7/8" 7/8"
7/8" 7/8"
7/8" 7/8"
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
D.O. D.O. D.O.
D.O. D.O. D.O. D.O.
D.O. D.O.
D.O. D.O.
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4" 1 3/4"
1 3/4"
5" 5" 5"
5" 5" 5" 5"
5" 5"
5" 5"
9/16" 9/16" 9/16"
9/16" 9/16" 9/16" 9/16"
9/16" 9/16"
9/16" 9/16"
1/8" 1/8" 1/8"
1/8" 1/8" 1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
E9-3513 E9-3513 E9-3513
E9-3513 E9-3513 E9-3513 E9-3513
E9-3513 E9-3513
E9-3513 E9-3513
7/8" 7/8" 7/8"
7/8" 7/8" 7/8" 7/8"
7/8" 7/8"
7/8" 7/8"
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XXAD_DTBATD_XX AD_DTBATD_XX
43 43 43
43 43 43 43
43 43
43 43
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
FRONT VIEW FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
FRONT VIEW FRONT VIEW
E1-3503 E1-3503 E1-3503
E1-3503 E1-3503 E1-3503 E1-3503
E1-3503 E1-3503
E1-3503 E1-3503
FC-1220 FC-1220 FC-1220
FC-1220 FC-1220 FC-1220 FC-1220
FC-1220 FC-1220
FC-1220 FC-1220
HF-2510 HF-2510 HF-2510
HF-2510 HF-2510 HF-2510 HF-2510
HF-2510 HF-2510
HF-2510 HF-2510
VERTICAL VERTICAL VERTICAL
VERTICAL VERTICAL VERTICAL VERTICAL
VERTICAL VERTICAL
VERTICAL VERTICAL
MULLION MULLION MULLION
MULLION MULLION MULLION MULLION
MULLION MULLION
MULLION MULLION
DOOR LEAF DOOR LEAF DOOR LEAF
DOOR LEAF DOOR LEAF DOOR LEAF DOOR LEAF
DOOR LEAF DOOR LEAF
DOOR LEAF DOOR LEAF
DOOR HEAD DOOR HEAD DOOR HEAD
DOOR HEAD DOOR HEAD DOOR HEAD DOOR HEAD
DOOR HEAD DOOR HEAD
DOOR HEAD DOOR HEAD
SUBFRAME SUBFRAME SUBFRAME
SUBFRAME SUBFRAME SUBFRAME SUBFRAME
SUBFRAME SUBFRAME
SUBFRAME SUBFRAME
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL
CURTAINWALL CURTAINWALL CURTAINWALL
CURTAINWALL CURTAINWALL CURTAINWALL CURTAINWALL
CURTAINWALL CURTAINWALL
CURTAINWALL CURTAINWALL
FRAMING FRAMING FRAMING
FRAMING FRAMING FRAMING FRAMING
FRAMING FRAMING
FRAMING FRAMING
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
DOOR LEAF DOOR LEAF DOOR LEAF
DOOR LEAF DOOR LEAF DOOR LEAF DOOR LEAF
DOOR LEAF DOOR LEAF
DOOR LEAF DOOR LEAF
DOOR HEAD DOOR HEAD DOOR HEAD
DOOR HEAD DOOR HEAD DOOR HEAD DOOR HEAD
DOOR HEAD DOOR HEAD
DOOR HEAD DOOR HEAD
SUBFRAME SUBFRAME SUBFRAME
SUBFRAME SUBFRAME SUBFRAME SUBFRAME
SUBFRAME SUBFRAME
SUBFRAME SUBFRAME
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
DOOR
JAMB
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
SUBFRAME
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O. D.L
.O.
D.L
.O.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
6" 6" 6"
6" 6" 6" 6"
6" 6"
6" 6"
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH
CUSTOM LENGTH CUSTOM LENGTH
END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS
END MULL ANCHORS END MULL ANCHORS
(SEE SKETCHES (SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES (SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES
(SEE SKETCHES (SEE SKETCHES
"A-A" AND "B-B" @ "A-A" AND "B-B" @ "A-A" AND "B-B" @
"A-A" AND "B-B" @ "A-A" AND "B-B" @ "A-A" AND "B-B" @ "A-A" AND "B-B" @
"A-A" AND "B-B" @ "A-A" AND "B-B" @
"A-A" AND "B-B" @ "A-A" AND "B-B" @
DETAIL 13 FOR DETAIL 13 FOR DETAIL 13 FOR
DETAIL 13 FOR DETAIL 13 FOR DETAIL 13 FOR DETAIL 13 FOR
DETAIL 13 FOR DETAIL 13 FOR
DETAIL 13 FOR DETAIL 13 FOR
LENGTH INFO) LENGTH INFO) LENGTH INFO)
LENGTH INFO) LENGTH INFO) LENGTH INFO) LENGTH INFO)
LENGTH INFO) LENGTH INFO)
LENGTH INFO) LENGTH INFO)
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2" 1/2"
1/2"
HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
6 6 6
6 6 6 6
6 6
6 6
8 8 8
8 8 8 8
8 8
8 8
16 16 16
16 16 16 16
16 16
16 16
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
44 44 44
44 44 44 44
44 44
44 44
2 2 2
2 2 2 2
2 2
2 2
A3.5 A3.5 A3.5
A3.5 A3.5 A3.5 A3.5
A3.5 A3.5
A3.5 A3.5
HEAD HEAD HEAD
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
23 23 23
23 23 23 23
23 23
23 23
8 8 8
8 8 8 8
8 8
8 8
6 6 6
6 6 6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
75 75 75
75 75 75 75
75 75
75 75
BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
76 76 76
76 76 76 76
76 76
76 76
23 23 23
23 23 23 23
23 23
23 23
28 28 28
28 28 28 28
28 28
28 28
25 25 25
25 25 25 25
25 25
25 25
3 3 3
3 3 3 3
3 3
3 3
28 28 28
28 28 28 28
28 28
28 28
PC0806 PC0806 PC0806
PC0806 PC0806 PC0806 PC0806
PC0806 PC0806
PC0806 PC0806
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
45 45 45
45 45 45 45
45 45
45 45
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL
6" 6" 6"
6" 6" 6" 6"
6" 6"
6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O. D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O. D.L
.O.
D.L
.O.
E20104 E20104 E20104
E20104 E20104 E20104 E20104
E20104 E20104
E20104 E20104
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
16 16 16
16 16 16 16
16 16
16 16
16 16 16
16 16 16 16
16 16
16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
PC0806 PC0806 PC0806
PC0806 PC0806 PC0806 PC0806
PC0806 PC0806
PC0806 PC0806E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
46 46 46
46 46 46 46
46 46
46 46
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
SILL SILL SILL
SILL SILL SILL SILL
SILL SILL
SILL SILL
6" 6" 6"
6" 6" 6" 6"
6" 6"
6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2" 2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O. D.L
.O.
D.L
.O.
E20104 E20104 E20104
E20104 E20104 E20104 E20104
E20104 E20104
E20104 E20104
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
75 75 75
75 75 75 75
75 75
75 75
16 16 16
16 16 16 16
16 16
16 16
16 16 16
16 16 16 16
16 16
16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2" 1/2"
1/2"
8 8 8
8 8 8 8
8 8
8 8
6 6 6
6 6 6 6
6 6
6 6
4 4 4
4 4 4 4
4 4
4 4
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239 E2-0239
E2-0239 E2-0239
E2-0239 E2-0239
29 29 29
29 29 29 29
29 29
29 29
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
8 8 8
8 8 8 8
8 8
8 8
6 6 6
6 6 6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
1 1 1
1 1 1 1
1 1
1 1
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
CUSTOM LENGTH END CUSTOM LENGTH END CUSTOM LENGTH END
CUSTOM LENGTH END CUSTOM LENGTH END CUSTOM LENGTH END CUSTOM LENGTH END
CUSTOM LENGTH END CUSTOM LENGTH END
CUSTOM LENGTH END CUSTOM LENGTH END
MULL ANCHORS (SEE MULL ANCHORS (SEE MULL ANCHORS (SEE
MULL ANCHORS (SEE MULL ANCHORS (SEE MULL ANCHORS (SEE MULL ANCHORS (SEE
MULL ANCHORS (SEE MULL ANCHORS (SEE
MULL ANCHORS (SEE MULL ANCHORS (SEE
SKETCHES @ DETAIL SKETCHES @ DETAIL SKETCHES @ DETAIL
SKETCHES @ DETAIL SKETCHES @ DETAIL SKETCHES @ DETAIL SKETCHES @ DETAIL
SKETCHES @ DETAIL SKETCHES @ DETAIL
SKETCHES @ DETAIL SKETCHES @ DETAIL
13 FOR MORE INFO) 13 FOR MORE INFO) 13 FOR MORE INFO)
13 FOR MORE INFO) 13 FOR MORE INFO) 13 FOR MORE INFO) 13 FOR MORE INFO)
13 FOR MORE INFO) 13 FOR MORE INFO)
13 FOR MORE INFO) 13 FOR MORE INFO)
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235 E9-1235
BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
47 47 47
47 47 47 47
47 47
47 47
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
DOOR DOOR DOOR
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR DOOR
HEAD HEAD HEAD
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD HEAD
AS-0402 AS-0402 AS-0402
AS-0402 AS-0402 AS-0402 AS-0402
AS-0402 AS-0402
AS-0402 AS-0402
E20104 E20104 E20104
E20104 E20104 E20104 E20104
E20104 E20104
E20104 E20104
6" 6"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2" 4 1/2"
4 1/2"
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.L
.
D.L
.
D.L
.
D.L
.
D.L
.
D.L
.
D.L
.
D.L
.O.
D.L
.O. D.L
.
D.L
.
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216 AS-1216
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206
E9-1206 E9-1206
16 16 16
16 16 16 16
16 16
16 16
16 16 16
16 16 16 16
16 16
16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1253 E9-1253 E9-1253
E9-1253 E9-1253 E9-1253 E9-1253
E9-1253 E9-1253
E9-1253 E9-1253
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4" 1/4"
1/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8" 1/8"
1/8"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4"
1 3/4" 1 3/4"
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2"
4 1/2" 4 1/2"
8 8 8
8 8 8 8
8 8
8 8
6 6 6
6 6 6 6
6 6
6 6
6 6 6
6 6 6 6
6 6
6 6
8 8 8
8 8 8 8
8 8
8 8
4 4 4
4 4 4 4
4 4
4 4
3 3 3
3 3 3 3
3 3
3 3
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4"
1 3/4" 1 3/4"
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2"
4 1/2" 4 1/2"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16" 9/16"
9/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16" 11/16"
11/16"
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
29 29 29
29 29 29 29
29 29
29 29
6" 6" 6"
6" 6" 6" 6"
6" 6"
6" 6"
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
48 48NONE NONENONE NONE
DOOR DOOR DOOR
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR DOOR
SILL SILL SILL
SILL SILL SILL SILL
SILL SILL
SILL SILL
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
49 49 49
49 49 49 49
49 49
49 49
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
JAMB JAMB JAMB
JAMB JAMB JAMB JAMB
JAMB JAMB
JAMB JAMB
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
8 8 8
8 8 8 8
8 8
8 8
6 6 6
6 6 6 6
6 6
6 6
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
20 20 20
20 20 20 20
20 20
20 20
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698 E9-8698
87.5° 87.5° 87.5°
87.5° 87.5° 87.5° 87.5°
87.5° 87.5°
87.5° 87.5°
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8"
2 7/8" 2 7/8"
86° 86° 86°
86° 86° 86° 86°
86° 86°
86° 86°
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220 E9-1220
E9-1220 E9-1220
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O.
D.L.O. D.L.O.
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
6 6 6
6 6 6 6
6 6
6 6
8 8 8
8 8 8 8
8 8
8 8
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545 E9-3545
E9-3545 E9-3545
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544 AS-3544
AS-3544 AS-3544
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698 E9-8698
3 1/8"3 1/8"
3 1/8"
3 1/8"3 1/8"
3 1/8"3 1/8"
3 1/8"3 1/8"
3 1/8"3 1/8"
D.L.O.D.L.O.
D.L.O.
D.L.O.D.L.O.
D.L.O.D.L.O.
D.L.O.D.L.O.
D.L.O.D.L.O.
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120E2-0120
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
E9-1241 E9-1241 E9-1241
E9-1241 E9-1241 E9-1241 E9-1241
E9-1241 E9-1241
E9-1241 E9-1241
AS-1240 AS-1240 AS-1240
AS-1240 AS-1240 AS-1240 AS-1240
AS-1240 AS-1240
AS-1240 AS-1240
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
AD_D AD_D AD_DTBATD_XX
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D AD_D
50 50 50
50 50 50 50
50 50
50 50
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE
DOOR DOOR DOOR
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR DOOR
JAMB JAMB JAMB
JAMB JAMB JAMB JAMB
JAMB JAMB
JAMB JAMB
6 6 6
6 6 6 6
6 6
6 6
8 8 8
8 8 8 8
8 8
8 8
AS-0417 AS-0417 AS-0417
AS-0417 AS-0417 AS-0417 AS-0417
AS-0417 AS-0417
AS-0417 AS-0417
E9-2344 E9-2344 E9-2344
E9-2344 E9-2344 E9-2344 E9-2344
E9-2344 E9-2344
E9-2344 E9-2344
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2" 4 1/2"
4 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4" 1 3/4"
1 3/4"
D.O. D.O. D.O.
D.O. D.O. D.O. D.O.
D.O. D.O.
D.O. D.O.
5" 5" 5"
5" 5" 5" 5"
5" 5"
5" 5"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210 PC-1210
PC-1210 PC-1210
9/16" 9/16" 9/16"
9/16" 9/16" 9/16" 9/16"
9/16" 9/16"
9/16" 9/16"
1/8" 1/8" 1/8"
1/8" 1/8" 1/8" 1/8"
1/8" 1/8"
1/8" 1/8"
4 4 4
4 4 4 4
4 4
4 4
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8" 1 1/8"
1 1/8"
3/4" 3/4" 3/4"
3/4" 3/4" 3/4" 3/4"
3/4" 3/4"
3/4" 3/4"
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
6 6 6
6 6 6 6
6 6
6 6
8 8 8
8 8 8 8
8 8
8 8
E9-1220E9-1220
E9-1220
E9-1220E9-1220
E9-1220E9-1220
E9-1220E9-1220
E9-1220E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120E2-0120
165°± 165°± 165°±
165°± 165°± 165°± 165°±
165°± 165°±
165°± 165°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
87.5°± 87.5°± 87.5°±
87.5°± 87.5°± 87.5°± 87.5°±
87.5°± 87.5°±
87.5°± 87.5°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D. R.D.
R.D. R.D.
AD_XREFDTL_SHEET
SBE-D51.DWG
51 2
AD_XREFDTL_SHEET
SBE-D52.DWG
52 2
AD_XREFDTL_SHEET
SBE-D53.DWG
53 2
AD_XREFDTL_SHEET
SBE-D54.DWG
54 2
AD_XREFDTL_SHEET
SBE-D55.DWG
55 2
AD_XREFDTL_SHEET
SBE-D56.DWG
56 2
AD_XREFDTL_SHEET
SBE-D57.DWG
57 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D58.DWG
58 2
AD_XREFDTL_SHEET
SBE-D59.DWG
59 2
AD_XREFDTL_SHEET
SBE-D60.DWG
60 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
20
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E9-1241E9-1241
E9-1241
E9-1241E9-1241
E9-1241E9-1241
E9-1241
E9-1241E9-1241
E9-1241
AS-1240 AS-1240 AS-1240
AS-1240 AS-1240 AS-1240 AS-1240
AS-1240 AS-1240
AS-1240
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
AD_D
51NONENONE
DOORJAMBS
6 6 6
6 6 6 6
6 6
6
8 8 8
8 8 8 8
8 8
8
AS-0417 AS-0417 AS-0417
AS-0417 AS-0417 AS-0417 AS-0417
AS-0417 AS-0417
AS-0417
E9-2344 E9-2344 E9-2344
E9-2344 E9-2344 E9-2344 E9-2344
E9-2344 E9-2344
E9-2344
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2" 4 1/2"
1 3/4"
D.O.
5"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210 PC-1210
PC-1210
9/16" 1/8" 1/8" 1/8"
1/8" 1/8" 1/8" 1/8"
1/8"
1/8" 1/8"
1/8"
4 4 4
4 4 4 4
4
4 4
4
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8" 1 1/8"
3/4" 3/4" 3/4"
3/4" 3/4" 3/4" 3/4"
3/4"
3/4" 3/4"
3/4"
R.D. R R
R R R R
R R
R
6 6 6
6 6 6 6
6 6
6
8 8 8
8 8 8 8
8 8
8
3 1/8"3 1/8"
3 1/8"
3 1/8"3 1/8"
3 1/8"3 1/8"
3 1/8"
3 1/8"3 1/8"
3 1/8"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4" 1 3/4"
5" 5" 5"
5" 5" 5" 5"
5"
5" 5"
5"
R.D.R.D.
R.D.
R.D.R.D.
R.D.R.D.
R.D.
R.D.R.D.
R.D.
D.O.D.O.
D.O.
D.O.D.O.
D.O.D.O.
D.O.
D.O.D.O.
D.O.
9/16" 9/16"
9/16"
9/16" 9/16"
9/16" 9/16"
9/16"
9/16" 9/16"
9/16"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4
4 1/2"
4 1/2" 4 1/2"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8"
1 1/8" 1 1/8"
3/4"3/4"
3/4"
3/4"3/4"
3/4"3/4"
3/4"
3/4"3/4"
3/4"
1/8" 1/8"
1/8"
1/8" 1/8"
1/8" 1/8"
1/8"
1/8" 1/8"
1/8"
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
6 6 6
6 6 6 6
6 6
6
8 8 8
8 8 8 8
8 8
8
AS-0417
AS-0417
AS-0417
AS-0417
AS-0417
AS-0417
AS-0417
AS-0417
AS-0417
AS-0417
AS-0417
E9-2344
E9-2344
E9-2344
E9-2344
E9-2344
E9-2344
E9-2344
E9-2344
E9-2344
E9-2344
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210 PC-1210
PC-1210
PC-1210 PC-1210
PC-1210
161°± 161°± 161°±
161°± 161°± 161°± 161°±
161°± 161°±
161°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
6 6 6
6 6 6 6
6
6 6
6
8 8 8
8 8 8 8
8
8 8
8
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
52 52 52
52 52 52 52
52 52
52
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY
VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY
VERTICAL SPLA
VERTICAL SPLAY VERTICAL SPLAY
VERTICAL SPLAY
E9-9899 E9-9899 E9-9899
E9-9899 E9-9899 E9-9899 E9-9899
E9-9899 E9-9899
E9-9899
3 1/8" 3 1/8" 3 1/8"
3 1/8" 3 1/8" 3 1/8" 3 1/8"
3 1/8"
3 1/8" 3 1/8"
3 1/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L
D.L.O. D.L.O.
D.L.O.
AS-1240 AS-1240 AS-1240
AS-1240 AS-1240 AS-1240 AS-1240
AS-1240
AS-1240 AS-1240
AS-1240
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1241 E9-1241 E9-1241
E9-1241 E9-1241 E9-1241 E9-1241
E9-1241
E9-1241 E9-1241
E9-1241
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
165°± 165°± 165°±
165°± 165°± 165°± 165°±
165°± 165°±
165°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O.
D.L.O.
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E9-1220E9-1220
E9-1220
E9-1220E9-1220
E9-1220E9-1220
E9-1220
E9-1220E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
90°± 90°± 90°±
90°± 90°± 90°± 90°±
90°± 90°±
90°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
90°± 90°± 90°±
90°± 90°± 90°± 90°±
90°± 90°±
90°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
53 53 53
53 53 53 53
53 53
53
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY
VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY
VERTICAL SPLA
VERTICAL SPLAY VERTICAL SPLAY
VERTICAL SPLAY
E9-9899 E9-9899 E9-9899
E9-9899 E9-9899 E9-9899 E9-9899
E9-9899 E9-9899
E9-9899
3 1/8" 3 1/8" 3 1/8"
3 1/8" 3 1/8" 3 1/8" 3 1/8"
3 1/8"
3 1/8" 3 1/8"
3 1/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L
D.L.O. D.L.O.
D.L.O.
AS-1240 AS-1240 AS-1240
AS-1240 AS-1240 AS-1240 AS-1240
AS-1240
AS-1240 AS-1240
AS-1240
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1241 E9-1241 E9-1241
E9-1241 E9-1241 E9-1241 E9-1241
E9-1241
E9-1241 E9-1241
E9-1241
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
161°± 161°± 161°±
161°± 161°± 161°± 161°±
161°± 161°±
161°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O.
D.L.O.
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E9-1220E9-1220
E9-1220
E9-1220E9-1220
E9-1220E9-1220
E9-1220
E9-1220E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
92°± 92°± 92°±
92°± 92°± 92°± 92°±
92°± 92°±
92°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
92°± 92°± 92°±
92°± 92°± 92°± 92°±
92°± 92°±
92°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
AD_D
54NONENONE
JAMB
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O.
D.L.O.RA
RA
RA
RAD
IUS =
245"
RA
RA
RA
RAD
IUS =
245"
RAD
IUS =
245"
RA
@ @ @
@ F
.O. SYSTEM
@ @ @
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@
6 6 6
6 6 6 6
6
6 6
6
8 8 8
8 8 8 8
8
8 8
8
8
8 8
6
6 6
AS NEEDED
AS NEEDED AS NEEDED
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545
E9-3545 E9-3545
E9-3545
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544
AS-3544 AS-3544
AS-3544
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8"
F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM
F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM
F.S. CHORD DIM. AT FACE OF SYSTEM
F.S. CHORD DIM. AT FACE OF SYSTEM F.S. CHORD DIM. AT FACE OF SYSTEM
F.S. CHORD DIM. AT FACE OF SYSTEM
1/2" 1/2" 1/2"
1/2" 1/2" 1/2" 1/2"
1/2"
1/2" 1/2"
1/2"
R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM.
R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM.
R.O. CHORD DIM. AT FACE OF SYSTEM.
R.O. CHORD DIM. AT FACE OF SYSTEM. R.O. CHORD DIM. AT FACE OF SYSTEM.
R.O. CHORD DIM. AT FACE OF SYSTEM.20
20 20
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220
E9-1220 E9-1220
E9-1220
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
92°± 92°± 92°±
92°± 92°± 92°± 92°±
92°± 92°±
92°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
84°±
(V.I.F.)
(V.I.F.) (V.I.F.)
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
55 55 55
55 55 55 55
55 55
55
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
JAMB JAMB JAMB
JAMB JAMB JAMB JAMB
JAMB JAMB
JAMB
8 8 8
8 8 8 8
8 8
8
6 6 6
6 6 6 6
6 6
6
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
20 20 20
20 20 20 20
20
20 20
20
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O.
D.L.O.
6 6 6
6 6 6 6
6
6 6
6
8 8 8
8 8 8 8
8
8 8
8
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545
E9-3545 E9-3545
E9-3545
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544
AS-3544 AS-3544
AS-3544
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220
E9-1220 E9-1220
E9-1220
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8"
84° 84° 84°
84° 84° 84° 84°
84° 84°
84°
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
88°± 88°± 88°±
88°± 88°± 88°± 88°±
88°±
88°± 88°±
88°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
56 56 56
56 56 56 56
56 56
56
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O
D.L.O. D.L.O.
D.L.O.
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544
AS-3544 AS-3544
AS-3544
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545
E9-3545 E9-3545
E9-3545
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
168°± 168°± 168°±
168°± 168°± 168°± 168°±
168°± 168°±
168°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
92°± 92°± 92°±
92°± 92°± 92°± 92°±
92°±
92°± 92°±
92°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
92°± 92°± 92°±
92°± 92°± 92°± 92°±
92°±
92°± 92°±
92°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220
E9-1220 E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220
E9-1220 E9-1220
E9-1220
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
57 57 57
57 57 57 57
57 57
57
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL SPLAY VERTICAL
SPLAY VERTICAL
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O
D.L.O. D.L.O.
D.L.O.
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544
AS-3544 AS-3544
AS-3544
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545
E9-3545 E9-3545
E9-3545
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
171°± 171°± 171°±
171°± 171°± 171°± 171°±
171°± 171°±
171°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
90.5°± 90.5°± 90.5°±
90.5°± 90.5°± 90.5°± 90.5°±
90.5°±
90.5°± 90.5°±
90.5°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
90.5°± 90.5°± 90.5°±
90.5°± 90.5°± 90.5°± 90.5°±
90.5°±
90.5°± 90.5°±
90.5°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220
E9-1220 E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220
E9-1220 E9-1220
E9-1220
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 &
(2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220
(2) FC-1220
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235 E9-1235
E9-1235 E9-1235
E9-1235
BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL BRAKE METAL BRAKE METAL
BRAKE METAL BRAKE METAL
BRAKE METAL
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK SHEAR BLOCK
SHEAR BLOCK
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
58 58 58
58 58 58 58
58 58
58
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
DOOR DOOR DOOR
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR
HEAD HEAD HEAD
HEAD HEAD HEAD HEAD
HEAD HEAD
HEAD
AS-0402 AS-0402 AS-0402
AS-0402 AS-0402 AS-0402 AS-0402
AS-0402
AS-0402 AS-0402
AS-0402
E20104 E20104 E20104
E20104 E20104 E20104 E20104
E20104 E20104
E20104
6"
6" 6"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4
4 1/2"
4 1/2" 4 1/2"
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.L
.
D.L
.
D.L
.
D.L
.O.
D.L
.
D.L
.
D.L
.
D.L
.O.
D.L
.O. D.L
.
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216
AS-1216
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206
E9-1206 E9-1206
E9-1206
16 16 16
16 16 16 16
16
16 16
16
16 16 16
16 16 16 16
16 16
16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1253 E9-1253 E9-1253
E9-1253 E9-1253 E9-1253 E9-1253
E9-1253 E9-1253
E9-1253
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4" 1/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8" 1/8"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
5"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4" 1 3/4" 1 3/4"
1 3/4"
1 3/4" 1 3/4"
1 3/4"
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
4 1/2"
4 1/2" 4 1/2"
4 1/2"
8 8 8
8 8 8 8
8
8 8
8
6 6 6
6 6 6 6
6
6 6
6
6 6 6
6 6 6 6
6 6
6
8 8 8
8 8 8 8
8 8
8
4 4 4
4 4 4 4
4
4 4
4
3 3 3
3 3 3 3
3
3 3
3
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
1 3/4" 1 3/4" 1 3/4"
1 3/4" 1 3/4" 1 3/4" 1 3/4"
1 3/4"
1 3/4" 1 3/4"
1 3/4"
4 1/2" 4 1/2" 4 1/2"
4 1/2" 4 1/2" 4 1/2" 4 1/2"
4 1/2"
4 1/2" 4 1/2"
4 1/2"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
10"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16"
9/16" 9/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16"
11/16" 11/16"
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME O
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
F.S
. (AT
DOOR
FRAME ONLY
)
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
D.O
.
29 29 29
29 29 29 29
29 29
29
6" 6" 6"
6" 6" 6" 6"
6"
6" 6"
6"
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
59
59 59
NONE
NONE NONE
NONE
NONE NONE
DOOR DOOR DOOR
DOOR DOOR DOOR DOOR
DOOR DOOR
DOOR
SILL SILL SILL
SILL SILL SILL SILL
SILL SILL
SILL
AD_DTBATD_XX AD_D AD_D
AD_D AD_D AD_D AD_D
AD_D AD_DAD_D
60 60 60
60 60 60 60
60 60
60
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE
JAMB JAMB JAMB
JAMB JAMB JAMB JAMB
JAMB JAMB
JAMB
8 8 8
8 8 8 8
8 8
8
6 6 6
6 6 6 6
6 6
6
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED
AS NEEDED
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
20 20 20
20 20 20 20
20
20 20
20
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O.
D.L.O. D.L.O.
D.L.O.
6 6 6
6 6 6 6
6
6 6
6
8 8 8
8 8 8 8
8
8 8
8
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3
HM2516-W3 HM2516-W3
HM2516-W3
E9-3545 E9-3545 E9-3545
E9-3545 E9-3545 E9-3545 E9-3545
E9-3545
E9-3545 E9-3545
E9-3545
AS-3544 AS-3544 AS-3544
AS-3544 AS-3544 AS-3544 AS-3544
AS-3544
AS-3544 AS-3544
AS-3544
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
RAD
IUS =
245"
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
@ F
.O. SYSTEM
E9-1220 E9-1220 E9-1220
E9-1220 E9-1220 E9-1220 E9-1220
E9-1220
E9-1220 E9-1220
E9-1220
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120
E2-0120 E2-0120
E2-0120
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698 E9-8698
E9-8698 E9-8698
E9-8698E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
2 7/8" 2 7/8" 2 7/8"
2 7/8" 2 7/8" 2 7/8" 2 7/8"
2 7/8"
2 7/8" 2 7/8"
2 7/8"
R.D. R.D. R.D.
R.D. R.D. R.D. R.D.
R.D.
R.D. R.D.
R.D.
84° 84° 84°
84° 84° 84° 84°
84° 84°
84°
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
91°± 91°± 91°±
91°± 91°± 91°± 91°±
91°±
91°± 91°±
91°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.)
(V.I.F.) (V.I.F.)
(V.I.F.)
AD_XREFDTL_SHEET
SBE-D61.DWG
61 2
AD_XREFDTL_SHEET
SBE-D62.DWG
62 2
AD_XREFDTL_SHEET
SBE-D63.DWG
63 2
AD_XREFDTL_SHEET
SBE-D64.DWG
64 2
AD_XREFDTL_SHEET
SBE-D65.DWG
65 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
21
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER77
AD_XREFDTL_SHEET
SBE-D66.DWG
66 2
E9-8698 E9-8698 E9-8698
E9-8698 E9-8698 E9-8698
D.L.O.D.L.O.
D.L.O.
D.L.O.D.L.O.
D.L.O.
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
6"
6"
6"
6"
6"
6"
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
E9-1241 E9-1241 E9-1241
E9-1241 E9-1241 E9-1241
AS-1240 AS-1240 AS-1240
AS-1240 AS-1240 AS-1240
AD_D AD_DTBATD_XX AD_D
AD_DTBATD_XX AD_D AD_D
61 61 61
61 61 61
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
DOOR DOOR DOOR
DOOR DOOR DOOR
JAMB JAMB JAMB
JAMB JAMB JAMB
6 6 6
6 6 6
8 8 8
8 8 8
AS-0417 AS-0417 AS-0417
AS-0417 AS-0417 AS-0417
E9-2344 E9-2344 E9-2344
E9-2344 E9-2344 E9-2344
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
D.O. D.O. D.O.
D.O. D.O. D.O.
5" 5" 5"
5" 5" 5"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210
9/16" 9/16" 9/16"
9/16" 9/16" 9/16"
1/8" 1/8" 1/8"
1/8" 1/8" 1/8"
4 4 4
4 4 4
15/16"
15/16"
15/16"
15/16"
15/16"
15/16"
3/4" 3/4" 3/4"
3/4" 3/4" 3/4"
R.D. R.D. R.D.
R.D. R.D. R.D.
6 6 6
6 6 6
8 8 8
8 8 8
E9-1220E9-1220
E9-1220
E9-1220E9-1220
E9-1220
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
E9-1253
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
3 1/8" 3 1/8" 3 1/8"
3 1/8" 3 1/8" 3 1/8"
167°± 167°± 167°±
167°± 167°± 167°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
89°± 89°± 89°±
89°± 89°± 89°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
R.D. R.D. R.D.
R.D. R.D. R.D.
AD_D
AD_DTBATD_XX
62
62
NONE
NONE
NONE
NONE
DOOR
DOOR
JAMB
JAMB
AS-0417 AS-0417 AS-0417
AS-0417 AS-0417 AS-0417
E9-3513 E9-3513 E9-3513
E9-3513 E9-3513 E9-3513
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
4 1/2"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
6"
6"
6"
6"
6"
6"
D.O D.O. D.O
D.O. D.O D.O
4 1/4" 4 1/4" 4 1/4"
4 1/4" 4 1/4" 4 1/4"
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120
5" 5" 5"
5" 5" 5"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210
9/16"
9/16"
1/8" 1/8" 1/8"
1/8" 1/8" 1/8"
2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2"
7/8" 7/8" 7/8"
7/8" 7/8" 7/8"
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
E1-
1203 &
(4) FC-12
12
D.O. D.O. D.O.
D.O. D.O. D.O.
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
1 3/4"
5" 5" 5"
5" 5" 5"
9/16" 9/16" 9/16"
9/16" 9/16" 9/16"
1/16" 1/16" 1/16"
1/16" 1/16" 1/16"
PC-1210 PC-1210 PC-1210
PC-1210 PC-1210 PC-1210
E9-3513 E9-3513 E9-3513
E9-3513 E9-3513 E9-3513
7/8" 7/8" 7/8"
7/8" 7/8" 7/8"
E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120
AD_D AD_DTBATD_XX AD_D
AD_DTBATD_XX AD_D AD_D
63 63 63
63 63 63
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY
VERTICAL SPLAY VERTICAL SPLAY VERTICAL SPLAY
E9-9899 E9-9899 E9-9899
E9-9899 E9-9899 E9-9899
3 1/8" 3 1/8" 3 1/8"
3 1/8" 3 1/8" 3 1/8"
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
AS-1240 AS-1240 AS-1240
AS-1240 AS-1240 AS-1240
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1241 E9-1241 E9-1241
E9-1241 E9-1241 E9-1241
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.D. R.D. R.D.
R.D. R.D. R.D.
167°± 167°± 167°±
167°± 167°± 167°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
6"
6"
6"
6"
6"
6"
R.D. R.D. R.D.
R.D. R.D. R.D.
D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O.
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E2-0120E2-0120
E2-0120
E9-1220E9-1220
E9-1220
E9-1220E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
E9-1220
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
PC-0806
89°± 89°± 89°±
89°± 89°± 89°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
89°± 89°± 89°±
89°± 89°± 89°±
(V.I.F.) (V.I.F.) (V.I.F.)
(V.I.F.) (V.I.F.) (V.I.F.)
AD_DTBATD_XX
645 A4.5
HEAD
E1-1207 OR E1-1207 OR E1-1207 OR
E1-1207 OR E1-1207 OR E1-1207 OR
E1-1232 E1-1232 E1-1232
E1-1232 E1-1232 E1-1232
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
6" 6" 6"
6" 6" 6"
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
HD2516-W3 HD2516-W3 HD2516-W3
HD2516-W3 HD2516-W3 HD2516-W3
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
E9-1235
E9-1235
E9-1235
E9-1235
E9-1235
E9-1235
6 6 6
6 6 6
8 8 8
8 8 8
16 16 16
16 16 16
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239
75 75 75
75 75 75
E1-3503 W/ E1-3503 W/ E1-3503 W/
E1-3503 W/ E1-3503 W/ E1-3503 W/
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220
58 58 58
58 58 58
59 59 59
59 59 59
57
56
27
27
27 27 27
27 27 27
22 22 22
22 22 22
22
1 1 1
1 1 1
AD_D AD_DTBATD_XX AD_D
AD_DTBATD_XX AD_D AD_D
65 65 65
65 65 65
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
NONE NONE NONE
HORIZONTAL HORIZONTAL HORIZONTAL
HORIZONTAL HORIZONTAL HORIZONTAL
6" 6" 6"
6" 6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
E20104 E20104 E20104
E20104 E20104 E20104
AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
16 16 16
16 16 16
16 16 16
16 16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E9-1235
E9-1235
E9-1235
E9-1235
E9-1235
E9-1235
E1-3503 W/ E1-3503 W/ E1-3503 W/
E1-3503 W/ E1-3503 W/ E1-3503 W/
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) HF-2510 & (2) HF-2510 & (2) HF-2510 &
(2) FC-1220 (2) FC-1220 (2) FC-1220
(2) FC-1220 (2) FC-1220 (2) FC-1220
33 33 33
33 33 33
AD_D AD_DTBATD_XX AD_D
AD_DTBATD_XX AD_D AD_D
66 66 66
66 66 66
5 5 5
5 5 5
A4.5 A4.5 A4.5
A4.5 A4.5 A4.5
SILL SILL SILL
SILL SILL SILL
6" 6" 6"
6" 6" 6"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
2 1/2"
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
D.L
.O.
E20104 E20104 E20104
E20104 E20104 E20104
HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3
E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206
75 75 75
75 75 75
16 16 16
16 16 16
16 16 16
16 16 16
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
E2-0120
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
R.O
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
F.S
.
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
E1-1207 OR E1-1207 OR E1-1207 OR
E1-1207 OR E1-1207 OR E1-1207 OR
E1-1232 E1-1232 E1-1232
E1-1232 E1-1232 E1-1232
8 8 8
8 8 8
6 6 6
6 6 6
4 4 4
4 4 4
AS-3569 W/ AS-3569 W/ AS-3569 W/
AS-3569 W/ AS-3569 W/ AS-3569 W/
E2-0239 E2-0239 E2-0239
E2-0239 E2-0239 E2-0239
E9-1235 E9-1235 E9-1235
E9-1235 E9-1235 E9-1235
8 8 8
8 8 8
6 6 6
6 6 6
AS NEEDED AS NEEDED AS NEEDED
AS NEEDED AS NEEDED AS NEEDED
E1-3501 W/ E1-3501 W/ E1-3501 W/
E1-3501 W/ E1-3501 W/ E1-3501 W/
(2) HM-2556 (2) HM-2556 (2) HM-2556
(2) HM-2556 (2) HM-2556 (2) HM-2556
& (2) FC-1220 & (2) FC-1220 & (2) FC-1220
& (2) FC-1220 & (2) FC-1220 & (2) FC-1220
21 21 21
21 21 21
26 26 26
26 26 26
25 25 25
25 25 25
21 21 21
21 21 21
1 1 1
1 1 1
29 29 29
29 29 29
AD_XREFDTL_SHEET
SBE-D67.DWG
67 2
AD_XREFDTL_SHEET
SBE-D68.DWG
68 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
AD_XREFDTL_SHEET
SBE-D?.DWG
? 2
SHEET #:AD_SHTNUMB_XX
NEW SOUTH
BOSTON
ELEMENTARY
SCHOOL, HALIFAX
COUNTY, VIRGINIA
22
#12 x 2" OR 3 1/2", PFH WOOD SCREW
(WITH A 1/4" EXPANSION ANCHOR AS
NEEDED)
1
1/4"-20 X 2" OR 3 1/2", PFH MACHINE
SCREW
2
#12 X 2" OR 3", PFH SHEET METAL
SCREW
3
SHIMS AS NEEDED (PLASTIC OR CEDAR)4
PERIMETER CAULK (AS SPECIFIED)
INTERMITTENT FILLER PLATES (AS
NEEDED FOR SHIMMING AND ANCHORING)
5
6
ETHAFOAM BACKING ROD OR DENVER
FOAM
BEDDING CAULK (AS SPECIFIED)7
8
ALUMINUM POP RIVET (SIZE AND TYPE
AS NEEDED)
#12 PPH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
14
13
DOUBLE BACK FOAM TAPE (AS NEEDED)
NEUTRAL CURE SILICONE (COLOR AS
REQUIRED)
.040" ALUMINUM TRIM (TO MATCH
SYSTEM FINISH)
.125" ALUMINUM CLOSURE BRAKE (TO
MATCH SYSTEM FINISH)
12
11
9
10
STEEL REINFORCING (AS REQUIRED)
C.M.U. BY OTHERS20
19
ACCESS HOLE
SETTING BLOCK (TWO PER D.L.O.)
WEEP HOLES (TWO PER D.L.O.)
#12 PFH SHEET METAL SCREW (LENGTH
TO SUIT CONDITION)
18
17
15
16
INSULATION BY OTHERS
THROUGH WALL FLASHING BY OTHERS26
25
GYPSUM WALLBOARD BY OTHERS
SHEATHING BY OTHERS
WOOD BLOCKING BY OTHERS
BRICK VENEER BY OTHERS
24
23
21
22
EIFS OR DRYVIT VENEER BY OTHERS
PRECAST CONCRETE BY OTHERS32
31
SLAB BY OTHERS
FINISHED FLOOR (AS SCHEDULED BY
ARCHITECT)
STEEL STUD FRAMING BY OTHERS
STEEL BY OTHERS
30
29
27
28
J-TRIM OR CORNER BEAD BY OTHERS
AUTOMATIC DOOR SYSTEM BY OTHERS38
37
SEALANT BY OTHERS
EXPANSION JOINT BY OTHERS
STOOL BY OTHERS
ACOUSTIC CEILING SYSTEM BY OTHERS
36
35
33
34
CONCEALED/OVERHEAD CLOSER (NOT
SHOWN FOR CLARITY)
44
DOOR BY OTHERS39
50
49
48
47
45
46
53
52
51
58
55
57
56
59
OFFSET ARM (NOT SHOWN FOR CLARITY)
OFFSET ARM COVER WITH FASTENERS
SOFFIT SYSTEM, ATTACHMENTS AND
TRIM BY OTHERS
3/8" HEX HEAD BOLT ASS'Y (BOLT,
WASHERS, NUT)
3/8"-16 WEDGE ANCHOR, 2 1/2"
EMBEDMENT
STUCCO VENEER SYSTEM,
ATTACHMENTS AND TRIM BY OTHERS
CONTINUOUS HINGE BY OTHERS (VERIFY
CLEARANCE REQUIRED)
FLASHING BY OTHERS
ROOF MEMBRANE BY OTHERS
ROOF CONSTRUCTION BY OTHERS
THRESHOLD BY OTHERS (VERIFY
CLEARANCE REQUIRED)
PLYWOOD BY OTHERS
INTERMITTENT ALUMINUM "Z" CLIP TO
HOLD TRIM IN PLACE
COPING AND ATTACHMENT BY OTHERS
ALUMINUM CHANNEL, SIZE AND
THICKNESS TO SUIT OR AS SHOWN
ALUMINUM ANGLE, SIZE AND THICKNESS
TO SUIT OR AS SHOWN
63
64
SPLICE SLEEVE
CLEARANCE NOTCH FOR INSTALLATION75
69
CEILING SUSPENSION SYSTEM BY
OTHERS
76
BOND BREAKER776"
6"
R.O. R.O.
F.S. F.S.
D.L.O. D.L.O.2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
1/2" 1/2"
1/2" 1/2" 1/2" 1/2"
1/2" 1/2" 1/2" 1/2"
E9-1235 E9-1235
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
AS-1216 AS-1216
AS-12 AS-12 AS-12 AS-12
AS-12 AS-12 AS-12 AS-12
HM2516-W3 HM2516-W3
HM2516-W HM2516-W HM2516-W HM2516-W
HM2516-W HM2516-W HM2516-W HM2516-W
AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX
AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX AD_DTBATD_XX
67 67
67 67 67 67
67 67 67 67
NONE NONE
NONE NONE NONE NONE
NONE NONE NONE NONE
NONE NONE
NONE NONE NONE NONE
NONE NONE NONE NONE
JAMB JAMB
JAMB JAMB JAMB JAMB
JAMB JAMB JAMB JAMB
AS NEEDED AS NEEDED
6 68 8
A A
A A A A
A A A A
A A
A A A A
A A A A
1/4"
R.O
.
ALUM
INUM
BRAKE LENGTH
6"
AT SPLICE (AS
REQUIRED BY
LENGTH OF
ALUMINUM
BRAKE SHAPE)
AT SILL OF CURTAINWALL
1/2"
AD_DTBATD_XX AD_DTBATD_X
A-A A-ANONE NONENONE NONE
SECTION SECTION(APPLIES TO (APPLIES TO
DETAILS #67 & 68) DETAILS #67 & 68)
LINE OF SILL
CONSTRUCTION
BY OTHERS
AT HEAD OF CURTAINWALL
1/2"
ALUM
INUM
BRAKE LENGTH
USE .040" ALUMINUM
FOR SPLICE SLEEVE
LINE OF HEAD
CONSTRUCTION BY
OTHERS
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
4 4
4 4 4 4
4 4 4 4
15 15
15 15 15 15
15 15 15 15
6 8
86
69
776
9
63
11
11
11
11
63
6 6
6 6 6 6
6 6 6 6
8 8
8 8 8 8
8 8 8 8
9 9
9 9 9 9
9 9 9 9
69 69
69 69 69 69
69 69 69 69
14 14
63 63
63 63 63 63
63 63 63 63
20 20
6 6
6 6 6 6
6 6 6 6
6"
6"
6"
6"
6"
6"
6"
6"
6"
6"
AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
AS-1216 AS-1216 AS-1216 AS-1216
E9-1235 E9-1235
E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
E9-1206 E9-1206 E9-1206 E9-1206
HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
HM2516-W3 HM2516-W3 HM2516-W3 HM2516-W3
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
F.S. F.S.
F.S. F.S. F.S. F.S.
F.S. F.S. F.S. F.S.
D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
D.L.O. D.L.O. D.L.O. D.L.O.
R.O. R.O.
R.O. R.O. R.O. R.O.
R.O. R.O. R.O. R.O.
8 1/2" 8 1/2"
8 1/2" 8 1/2" 8 1/2" 8 1/2"
8 1/2" 8 1/2" 8 1/2" 8 1/2"
1/4" 1/4"
1/4" 1/4" 1/4" 1/4"
1/4" 1/4" 1/4" 1/4"
**ALL NOTES, **ALL NOTES,
PART NUMBERS PART NUMBERS
P P P P
P P P P
AND DIMENSIONS AND DIMENSIONS
AN AN AN AN
AN AN AN AN
ARE TYPICAL** ARE TYPICAL**
A A A A
A A A A
A A
A A A A
A A A A
A A
A A A A
A A A A
AD_DTBATD_XX AD_DTBATD_XX
68NONENONE
OUTSIDE CORNER OUTSIDE CORNER
90 DEGREE 90 DEGREE
E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
E2-0120 E2-0120 E2-0120 E2-0120
2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
6" 6"
6" 6" 6" 6"
6" 6" 6" 6"
4 4
4 4 4 4
4 4 4 4
15 15
15 15 15 15
15 15 15 15
6 6
6 6 6 6
6 6 6 6
7 7
7 7 7 7
7 7 7 7
6 6
6 6 6 6
6 6 6 6
63 63
14 14
E2-0120
E2-0120
E2-0120
E2-0120
6" 6"
4 4
4 4 4 4
4 4 4 4
15 15
15 15 15 15
15 15 15 15
9 9
69 69
F.S
.
F.S
.
R.O
.
R.O
.
8 1/2"
8 1/2"
6"
6"
2 1/2"
2 1/2"
1/4"
1/4"
D.L
.O.
D.L
.O.
E9-1235 E9-1235
Related Documents
