Page 1
ARCH 451: PRESENTING IN REVITGRAPHICS, SECTION BOXES, AND WALL SECTIONS
Page 2
TABLE OF CONTENTS1- Graphics in Project File pp. 1-3 - Lineweights
2- Graphics in Section View pp. 4-10 - Detail Level - Visual Style - Visibility Graphics - Fill Region
3- Graphics in 3D View pp. 12-23 - Detail Level - Visual Style - Visibility Graphics - Object Styles - Materials
4- Section Boxes pp. 24-27
5- Wall Sections pp. 28-35
6- Printing pp. 36-38
Page 3
1
GRAPHICS IN THE PROJECT FILE
Page 4
2LINEWEIGHTSManage > Additional Settings > Lineweights
Page 5
3LINEWEIGHTSChange the lineweights according to the screenshot or the ARCH 451_Graphic Overrides Document
Page 6
4
GRAPHICS IN THE SECTION VIEW
Page 7
5DETAIL LEVELChange the Detail Level to Fine.
Page 8
6VISUAL STYLEChange the Visual Style to Hidden Line.
Page 9
7VISIBILITY GRAPHICSChanges the Graphics in the View.
Page 10
8VISIBILITY GRAPHICSMake sure Architecture and Structure are checked. Change the Visibilty Graphics according to ARCH 451_Graphic Overrides Document.
Page 11
9FILL REGIONHover over the line and hit the TAB key to select the correct region.
Page 12
10FILL REGIONChange the settings according to the ARCH 451_Graphic Overrides Document.
Page 13
11
GRAPHICS IN 3D VIEW
Page 14
12DETAIL LEVELChange the Detail Level to Medium.
Page 15
13VISUAL STYLEChange the Visual Style to Hidden Line.
Page 16
14VISUAL STYLEClick on Graphic Display Options.
Page 17
15VISUAL STYLESelect Think Lines for the Silhouettes.
Page 18
16VISUAL STYLEEdit the Thin Lines by selecting Edit/New.
Page 19
17VISUAL STYLEChange the settings according to the ARCH 451_Graphic Overrides Document.
Page 20
18VISUAL STYLEThe Silhouettes will be changed for the Axonometric View.
Page 21
19VISUAL STYLETo remove a line as a silhouette go to Modify > Linework and select “Not Silhouette”.
Page 22
20VISIBILITY GRAPHICSChanges the Graphics in the View.
Page 23
21VISIBILITY GRAPHICSMake sure Architecture and Structure are checked. Change the Visibilty Graphics according to ARCH 451_Graphic Overrides Document.
Page 24
22OBJECT STYLESMake sure Architecture and Structure are checked. Change the Object Styles according to ARCH 451_Graphic Overrides Document.
Page 25
23MATERIALSGo to Manage > Materials. Change the Materials according to ARCH 451_Graphic Overrides Document.
Page 27
25SECTION BOXUnder Properties, check the Section Box.
Page 28
26SECTION BOXAdjust the Section Box while in the Top View.
Page 29
27SECTION BOXTurn the Section Box off under Visibility Graphics > Annotation Categories > Section Boxes.
Page 31
29WALL EDITEdit the Wall Type.
Page 32
30WALL EDITOpen the Preview view > Section Modify type.
Page 33
31WALL EDITMake a Sweep > Add > Load Profile.
Page 34
32WALL EDITClick on Profiles.
Page 35
33WALL EDITOpen the Wall Sweep - Brick Soldier Course
Page 36
34WALL EDITAdd into the model.
Page 37
35WALL EDITCheck the wall against the section...this one is wrong.
Page 39
37PRINTChange the settings to Raster Processing. Appearances > Raster Quality > Presentation.
Page 40
38PRINTChange the Adobe PDF Settings to High Quality Print.