SECTION 27 20 00
COMMUNICATION DISTRIBUTION SYSTEMS
Display hidden notes to specifier. (Don't know how? Click
Here)
Copyright 2018 - 2020 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Suttle; network solutions for
intelligent homes.This section is based on the products of Suttle,
which is located at:1001 E. Highway 212Hector, MN 55342Toll Free
Tel: 888-881-7875Tel: 604-881-7875Email: request info
([email protected])Web:
https://www.suttlesolutions.com/product-category/mediamax [ Click
Here ] for additional information.Suttle specializes in wired
network solutions for the intelligent home and business as well as
edge of network solutions for providers.Suttle solutions simplify
network deployment with products that are service provider approved
and future-proof for new technologies and market demands.With
design and manufacturing in Hector, MN, our products are known for
their quality construction, reliable performance, and long-lasting
durability, in compliance with the highest industry standards.
ANSI/TIA-968-A and ANSI/TIA-1096 (included formerly in FCC Part 68
Subpart F)ISO 9001:2008 TL9000 - (H) R. 5.5/5.0 CertifiedTelcordia
and SCTE-IPC specificationsUnderwriter Laboratories (UL)National
Electrical Code (NEC)RoHS compliant materialsFounded in 1910,
Suttle is a Communications Systems Inc company (NASDAQ: JCS).
1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for
project.
1.1.1 Panels, enclosures, and covers.
1.1.2 Modules.
1.1.3 Patch panels.
1.1.4 Jacks.
1.1.5 Faceplates.
1.1.6 Accessories.
1.1.6.1 Couplers and adapters.
1.1.6.2 Fiber accessories.
1.1.6.3 Inline xDSL filters.
1.1.6.4 Modular plugs.
1.1.6.5 Patch cords.
1.1.6.6 Wall mount xDSL filters.
1.1.7 Contractor panel kits.
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant
to this project; add others as required.
1.2.1 Section 07 84 13 - Penetration Firestopping.
1.2.2 Section 26 05 00 - Common Work Results for Electrical.
1.2.3 Section 26 05 48 - Vibration and Seismic Controls for
Electrical Systems.
1.2.4 Section 26 27 16 - Electrical Cabinets and Enclosures.
1.3 REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below
that are not actually required by the text of the edited
section.
1.3.1 American Council for Terminal Attachments (ACTA).
1.3.2 American National Standards Institute (ANSI):
1.3.2.1 ANSI T1.421 - In-Line Filter for Use with Voiceband
Terminal Equipment Operating on the Same Wire Pair with High
Frequency (up to 12 MHz) Devices.
1.3.3 Electronic Industries Alliance (EIA).
1.3.4 Federal Communications Commission (FCC):
1.3.4.1 Part 68 of the FCC rules (47 C.F.R. Part 68) - Governs
the direct connection of Terminal Equipment (TE) to the Public
Switched Telephone Network (PSTN), and to wireline carrier-owned
facilities used to provide private line services.
1.3.5 National Electrical Manufacturer Association (NEMA):
1.3.6 Society of Cable Engineers (SCTE):
1.3.6.1 ANSI/SCTE 02 - Specification for "F" Port, Female,
Indoor.
1.3.7 Telecommunications General Requirements (GR):
1.3.7.1 GR-3123-CORE - Generic Requirements for Indoor Fiber
Distribution Hubs.
1.3.7.2 GR-3125-CORE - Outdoor Fiber Distribution Hubs - new GR
for FTTP.
1.3.8 Telecommunications Industry Association (TIA):
1.3.8.1 TIA 1096 - Telecommunications Telephone Terminal
Equipment Connector Requirements for Connection of Terminal
Equipment to the Telephone Network.
1.3.8.2 TIA/EIA 568-C.2 - Balanced Twisted-Pair
Telecommunication Cabling and Components Standard.
1.3.9 Underwriters Laboratories (UL):
1.3.9.1 UL-94-V0 - Standard for Tests for Flammability of
Plastic Materials for Parts in Devices and Appliances; burning
stops within 10 seconds on a vertical specimen; drips of particles
allowed if they are not inflamed.
1.3.9.2 UL 1863 - Standard for Communications-Circuit
Accessories.
1.3.9.3 UL 2416 - Standard for Audio/Video, Information and
Communication Technology Equipment Cabinet, Enclosure and Rack
Systems.
1.3.10 Underwriters Laboratories Canada (ULc):
1.4 SUBMITTALS
1.4.1 Submit under provisions of Section 01 30 00 -
Administrative Requirements.
1.4.2 Product Data:
1.4.2.1 Manufacturer's data sheets on each product to be
used.
1.4.2.2 Preparation instructions and recommendations.
1.4.2.3 Storage and handling requirements and
recommendations.
1.4.2.4 Installation methods.
1.4.3 Verification Samples: Submit two full size glass block
units of each type, size, pattern and color.
1.4.4 Manufacturer's Certificates and Test Reports: Certify
products meet or exceed specified requirements. Test reports should
be within 12 months of bid date.
1.5 QUALITY ASSURANCE
1.5.1 Manufacturer Qualifications: Company specializing in
manufacturing products specified in this section with a minimum ten
years documented experience.
1.5.2 Products: Listed and classified by Underwriters
Laboratories, Inc. as suitable for the purpose specified and
indicated.
** NOTE TO SPECIFIER ** Include a mock-up if the project size
and/or quality warrant taking such a precaution. The following is
one example of how a mock-up on might be specified. When deciding
on the extent of the mock-up, consider all the major different
types of work on the project.
1.5.3 Mock-Up: Prior to starting work assemble sample panels for
Architect's inspection and acceptance. Build in locations
acceptable to the Architect. Construct sample panels with required
accessories. Provide special features as directed.
1.5.3.1 Build sample panels for each different situation.
1.5.3.2 Retain sample panels during construction as a standard
for judging completed work. Do not alter, move, or destroy sample
panels until work is completed or removal is authorized.
1.6 DELIVERY, STORAGE, AND HANDLING
1.6.1 Store products in manufacturer's unopened packaging until
ready for installation.
1.6.2 Store and handle in strict compliance with manufacturer's
written instructions and recommendations.
1.6.3 Protect from damage due to weather, excessive temperature,
and construction operations.
1.7 SEQUENCING
1.7.1 Ensure that products of this section are supplied to
affected trades in time to prevent interruption of construction
progress.
1.8 PROJECT CONDITIONS
1.8.1 Maintain environmental conditions (temperature, humidity,
and ventilation) within limits recommended by manufacturer for
optimum results. Do not install products under environmental
conditions outside manufacturer's recommended limits.
1.9 WARRANTY
1.9.1 Provide manufacturers 10 Year limited Warranty.
2 PRODUCTS
2.1 MANUFACTURERS
2.1.1 Acceptable Manufacturer: Suttle, which is located at: 1001
E. Highway 212; Hector, MN 55342; Toll Free Tel: 888-881-7875; Tel:
604-881-7875; Email: request info ([email protected]); Web:
https://www.suttlesolutions.com/product-category/mediamax
** NOTE TO SPECIFIER ** Delete one of the following two
paragraphs; coordinate with requirements of Division 1 section on
product options and substitutions.
2.1.2 Substitutions: Not permitted.
2.1.3 Requests for substitutions will be considered in
accordance with provisions of Section 01 60 00 - Product
Requirements.
** NOTE TO SPECIFIER ** Delete article if not required.
2.2 PANELS ENCLOSURES WITH COVERS
2.2.1 Basis of Design: MediaMAX Panels as manufactured and
supplied by Suttle. For enhanced CAT6 and wireless connectivity and
house ONT and residential gateways. Utilizes plastic components
wherever possible to minimize wireless interference. Enclosure
venting for heat dissipation. For greenfield and brownfield
applications providing added space to secure gateways and next
generation ONT and battery backup systems within new or existing
media panels. Compatible with SOHO Access modules. Deep-lid covers
allow use of space in front of and above wiring panels.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.2.1.1 Part Number: MXE-15P-1G2. 15 in (381 mm) MediaMAX panel
(empty).
2.2.1.2 Part Number: MXE-15C-1G2. 15 in (381 mm) MediaMAX panel
hinged vented cover.
2.2.1.3 Part Number: MXE-15E-1G2. 15 in (381 mm) MediaMAX panel
(empty) with hinged vented cover.
2.2.1.4 Part Number: MXE-15C-4G2. 15 in (381 mm) MediaMAX panel
expanded hinged vented deep-lid cover, 4 in (102 mm) deep.
2.2.1.5 Part Number: MXE-30P-1G2. 30 in (762 mm) MediaMAX panel
(empty).
2.2.1.6 Part Number: MXE-30C-1G2. 30 in (762 mm) MediaMAX panel
hinged vented cover.
2.2.1.7 Part Number: MXE-30E-1G2. 30 in (762 mm) MediaMAX panel
(empty) with hinged vented cover.
2.2.1.8 Part Number: MXE-30E-2G2. 30 in (762 mm) MediaMAX panel
with hinged vented cover, equipment shelves, adjustable mounting
brackets, cable tie-downs, mounting screws and installation
instructions.
2.2.1.9 Part Number: MXE-30E-3G2. 30 in (762 mm) MediaMAX panel
with hinged vented cover, MXM-521 Gateway Termination Module,
equipment shelves, adjustable mounting brackets, cable tie-downs,
mounting screws, and installation instructions.
2.2.1.10 Part Number: MXE-30C-4G2. 30 in (762 mm) MediaMAX panel
expanded hinged vented deep-lid cover, 4 in (102 mm) deep.
2.2.1.11 Part Number: MXE-45P-1G2. 45 in (1143 mm) MediaMAX
panel (empty).
2.2.1.12 Part Number: MXE-45C-1G2. 45 in (1143 mm) MediaMAX
panel hinged vented cover.
2.2.1.13 Part Number: MXE-45E-1G2. 45 in (1143 mm) MediaMAX
panel (empty) with hinged vented cover.
2.2.1.14 Part Number: MXE-45C-4G2. 45 in (1143 mm) MediaMAX
panel expanded hinged vented deep-lid cover, 4 in (102 mm)
deep.
2.2.1.15 Color: White.
2.2.1.16 Listed: UL 2416, Issue 2, and ULc.
2.2.1.17 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
** NOTE TO SPECIFIER ** Delete dimensions options not
required.
2.2.1.18 Dimensions MXE-15 Series:
2.2.1.18.1 Enclosures (HxWxD): 15.36 x 14.25 x 4.0 in (390 x 362
x 102 mm).
2.2.1.18.2 Standard Covers (HxWxD): 17.8 x 17.5 x 1.11 (454 x
444 x 28 mm).
2.2.1.18.3 Deep Lid Covers (HxWxD): 17.8 x 17.5 x 4.21 (454 x
444 x 107 mm).
2.2.1.19 Dimensions MXE-30 Series:
2.2.1.19.1 Enclosures (HxWxD): 30.08 x 14.25 x 4.0 in (764 x 362
x 102 mm).
2.2.1.19.2 Standard Covers (HxWxD): 33.30 x 17.5 x 1.11 (846 x
444 x 28 mm).
2.2.1.19.3 Deep Lid Covers (HxWxD): 33.30 x 17.5 x 4.21 (846 x
444 x 107 mm).
2.2.1.20 Dimensions MXE-45 Series:
2.2.1.20.1 Enclosures (HxWxD): 46.36 x 14.25 x 4.0 in (1178 x
362 x 102 mm).
2.2.1.20.2 Standard Covers (HxWxD): 48.8 x 17.5 x 1.11 (1240 x
444 x 28 mm).
2.2.1.20.3 Deep Lid Covers (HxWxD): 48.8 x 17.5 x 4.21 (1240 x
444 x 107 mm).
2.2.1.21 Panel Accessories:
** NOTE TO SPECIFIER ** Delete accessories options not
required.
2.2.1.21.1 Part Number: MXE-ACC-1. 1 equipment shelf, 2
equipment brackets, 2 cable spools, 2 tie brackets, 4 cable ties,
12 screws.
2.2.1.21.2 Part Number: MXE-ACC-2. 2 equipment shelves, 4
equipment brackets, 1 hook & loop strap 30 in (762 mm), 4 cable
ties, 16 screws.
2.2.1.21.3 Part Number: MXE-CCK. Cable connector kit.
2.2.1.21.4 Part Number: MXE-DMK. Door mounting kit.
2.2.1.21.5 Part Number: MXE-ESB. 1 equipment shelf, 1 tie
bracket, 1 hook and loop strap, 30 in (762 mm), 6 screws, 6
push-pin fasteners.
2.2.1.21.6 Part Number: MXE-MDK. Microduct kit.
2.2.1.21.7 Part Number: SAE-CAN. AC outlet kit, non-surge
protected.
2.2.1.21.8 Part Number: SAE-GMT8. 2.5 in (64 mm) rubber grommets
for enclosure entry and exit holes; 8 rubber grommets.
2.2.1.21.9 Part Number: SAE-LOCK. Lock accessory kit.
2.2.1.21.10 Part Number: SAE-PS3. 3-outlet AC power-strip with
34 in (864 mm) cord.
2.2.1.22 Panel Features:
2.2.1.22.1 Housing Solution for Premise Equipment:
2.2.1.22.2 1.)Mount ONTs, gateways, battery backups and wiring
modules in a single enclosure
2.2.1.22.3 2.)Unique mounting bracket and shelf design accepts
wide variety of equipment dimensions.
2.2.1.22.4 3.)180 degree hinged cover for easy access.
2.2.1.22.5 Optimized for wireless connectivity: Plastic
construction minimizes electrical interference to wireless
components.
2.2.1.22.6 Improved heat dissipation and fire resistance
design:
2.2.1.22.7 1.)Unique ventilation design improves airflow and
heat dissipation.
2.2.1.22.8 2.)Material: High impact, flame retardant
thermoplastic, UL 94-V0 (indoor) rated.
2.2.1.22.9 3.)Meets latest fire resistance criteria for in-wall
installation (UL 2416, Issue 2, Section 12.5, Communications
Equipment Racks, Cabinets and Enclosures).
2.2.1.22.10 4.)Meets applicable Telcordia Generic Requirements,
GR-63, for indoor housings.
2.2.1.22.11 Modular design for new construction and
retrofit:
2.2.1.22.12 1.)Multiple cable ports for fiber cable and
micro-duct terminations and power outlet locations.
2.2.1.22.13 2.)Convenient cable-tie locations along cabinet
sides.
2.2.1.22.14 3.)Modular door design allows for physical
separation and security of equipment and modules.
2.2.1.22.15 Flexible future-proof design and light weight
plastic reduce total cost of ownership:
2.2.1.22.16 1.)Designed to accommodate new GPON, G.hn and G.fast
equipment.
2.2.1.22.17 2.)Accepts fiber, copper, coax cables and
terminations.
2.2.1.22.18 3.)Nearly 40 percent lighter than equivalent metal
enclosures.
2.2.2 Basis of Design: SOHO Access Home Networking Enclosures as
manufactured and supplied by Suttle. Fast, flexible, and clean
distribution management solution for voice, data, video, and audio
connections. Feature-rich, rugged enclosures.
2.2.2.1 Part Number: SAE-28NY. 28 in (711 mm) high
enclosure.
2.2.2.1.1 Dimensions (HxWxD): 28 x 14.25 x 3.75 in (711 x 362 x
95 mm).
2.2.2.2 Part Number: SAE-28DCNY. 28 in (711 mm) high enclosure
with door cover.
2.2.2.2.1 Dimensions (HxWxD): 30.3 x 16.5 x 4.10 in (770 x 419 x
104 mm),
2.2.2.3 Part Number: SADC-28VZ. 28 in (711 x mm) high door
cover.
2.2.2.3.1 Dimensions (HxWxD): 30.3 x 16.5 x 0.35 in (770 x 419 x
9 mm).
2.2.2.4 Part Number: SAE-42NY. 42 in (1067 mm) high
enclosure.
2.2.2.4.1 Dimensions (HxWxD): 42 x 14.25 x 3.75 in (1067 x 362 x
95 mm).
2.2.2.5 Part Number: SAE-42DDCNY. 42 in (1067 mm) high enclosure
and door cover.
2.2.2.5.1 Dimensions (HxWxD): 44.3 x 16.5 x 4.10 in (1125 x 419
x 104 mm).
2.2.2.6 Part Number: SADDC-1428. 42 in (1067 mm) high dual door
cover.
2.2.2.6.1 Dimensions (HxWxD): 44.3 x 16.5 x 0.35 in (1067 x 419
x 9 mm).
2.2.2.7 Part Number: SAM-EPM Enclosure Partition Module
2.2.2.8 Panel Features:
2.2.2.8.1 Material: Steel. 16 gauge, 0.0598 in (1.519 mm).
2.2.2.8.2 1.)Finish: Powder coat.
2.2.2.8.3 Mounting: Flush mounted between sixteen inch centered
studs or surface mounted via recessed mounting holes.
2.2.2.8.4 Numerous cable entry knock-outs.
2.2.2.8.5 Vertical and horizontal mounting hole pattern
2.2.2.8.6 Multiple cable tie attachment points.
2.2.2.8.7 UL listed for security alarm and fire signaling
applications.
2.2.2.8.8 Enclosures ship with necessary installation
hardware.
2.2.2.8.9 Door covers provide a knock-out for a security
lock.
2.2.2.8.10 Not Fire Rated: Enclosures should not be installed in
a fire rated wall.
** NOTE TO SPECIFIER ** Delete article if not required.
2.3 MODULES
** NOTE TO SPECIFIER ** Delete basis of design paragraphs not
required.
2.3.1 Basis of Design: Gateway Termination Module as
manufactured and supplied by Suttle. Supports up to five CAT6 data
outputs and four 2-line voice outputs. Cable terminations utilize
tool-less IDCs for improved transmission. Allows for changes in
wiring to be made quickly and easily with no tools. The signal is
simply patched from the voice or data source to the desired
outlet.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.3.1.1 Part Number: MXM-521. CAT6 gateway termination
module.
2.3.1.1.1 Listed: UL and ULc.
2.3.1.1.2 Input:
2.3.1.1.3 1.)Six RJ45 jacks.
2.3.1.1.4 2.)Two RJ14 jacks.
2.3.1.1.5 Output: Eight 4-pair tool-less IDCs.
2.3.1.1.6 Wiring: 568A and 568B.
2.3.1.1.7 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.1.2 Part Number: SAM-D8. CAT5e data/voice networking module.
Supports up to 8 outlets and are designed with front punch down
terminations. Allows for changes in wiring to be made quickly and
easily. The circuit is simply patched from the source to the
desired outlet.
2.3.1.2.1 Listed: UL and ULc.
2.3.1.2.2 Input: Eight RJ45 jacks.
2.3.1.2.3 Output: Eight 4-pair 110 IDCs.
2.3.1.2.4 Wiring: 568A.
2.3.1.2.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.1.3 Part Number: SAM-D8-C6. CAT6 data/voice networking
module. Supports up to 8 outlets and are designed with front punch
down terminations. Allows for changes in wiring to be made quickly
and easily. The circuit is simply patched from the source to the
desired outlet.
2.3.1.3.1 Listed: UL and ULc.
2.3.1.3.2 Input: Eight RJ45 jacks.
2.3.1.3.3 Output: Eight 4-pair 110 IDCs.
2.3.1.3.4 Wiring: 568A.
2.3.1.3.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.1.4 Part Number: SAM-D8-TC5. CAT5e data/voice networking
module. Supports up to 8 outlets and are designed with tool-less
IDCs. Allows for changes in wiring to be made quickly and easily
with no tools. The signal is simply patched from the source to the
desired outlet.
2.3.1.4.1 Listed: UL and ULc.
2.3.1.4.2 Input: Eight RJ45 jacks.
2.3.1.4.3 Output: Eight 4-pair tool-less IDCs.
2.3.1.4.4 Wiring: 568A and 568B.
2.3.1.4.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.1.5 Part Number: SAM-D8-TC6. CAT6 data/voice networking
module. Supports up to 8 outlets and are designed with tool-less
IDCs. Allows for changes in wiring to be made quickly and easily
with no tools. The signal is simply patched from the source to the
desired outlet.
2.3.1.5.1 Listed: UL and ULc.
2.3.1.5.2 Input: Eight RJ45 jacks.
2.3.1.5.3 Output: Eight 4-pair tool-less IDCs.
2.3.1.5.4 Wiring: 568A and 568B.
2.3.1.5.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.2 Basis of Design: MediaMAX Data Modules as manufactured and
supplied by Suttle. Supports up to five CAT6 data outputs and four
2-line voice outputs. Cable terminations utilize tool-less IDCs for
improved transmission. This module allows for changes in wiring to
be made quickly and easily with no tools. The signal is simply
patched from the voice or data source to the desired outlet.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.3.2.1 Part Number: MXM-521. CAT6 Gateway Termination
module.
2.3.2.1.1 Listed: UL and ULc.
2.3.2.1.2 Input:
2.3.2.1.3 1.)Six RJ45 jacks.
2.3.2.1.4 2.)Two RJ14 jacks.
2.3.2.1.5 Output: Eight 4-pair tool-less IDCs.
2.3.2.1.6 Wiring: 568A and 568B.
2.3.2.1.7 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.2.2 Part Number: SAM-D8. CAT5e data/voice networking module.
Supports up to 8 outlets and are designed with front punch down
terminations. Allows for changes in wiring to be made quickly and
easily. The circuit is simply patched from the source to the
desired outlet.
2.3.2.2.1 Listed: UL and ULc.
2.3.2.2.2 Input: Eight RJ45 jacks.
2.3.2.2.3 Output: Eight 4-pair 110 IDCs.
2.3.2.2.4 Wiring: 568A.
2.3.2.2.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.2.3 Part Number: SAM-D8-C6. CAT6 data/voice networking
module. Supports up to 8 outlets and are designed with front punch
down terminations. Allows for changes in wiring to be made quickly
and easily. The circuit is simply patched from the source to the
desired outlet.
2.3.2.3.1 Listed: UL and ULc.
2.3.2.3.2 Input: Eight RJ45 jacks.
2.3.2.3.3 Output: Eight 4-pair 110 IDCs.
2.3.2.3.4 Wiring: 568A.
2.3.2.3.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.2.4 Part Number: SAM-D8-TC5. CAT5e data/voice networking
module. Supports up to 8 outlets and are designed with tool-less
IDCs. Allows for changes in wiring to be made quickly and easily
with no tools. The signal is simply patched from the source to the
desired outlet.
2.3.2.4.1 Listed: UL and ULc.
2.3.2.4.2 Input: Eight RJ45 jacks.
2.3.2.4.3 Output: Eight 4-pair tool-less IDCs.
2.3.2.4.4 Wiring: 568A and 568B.
2.3.2.4.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.2.5 Part Number: SAM-D8-TC6. CAT6 data/voice networking
module. Supports up to 8 outlets and are designed with tool-less
IDCs. Allows for changes in wiring to be made quickly and easily
with no tools. The signal is simply patched from the source to the
desired outlet.
2.3.2.5.1 Listed: UL and ULc.
2.3.2.5.2 Input: Eight RJ45 jacks.
2.3.2.5.3 Output: Eight 4-pair tool-less IDCs.
2.3.2.5.4 Wiring: 568A and 568B.
2.3.2.5.5 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.3 Basis of Design: MediaMAX Voice Modules as manufactured
and supplied by Suttle.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.3.3.1 Part Number: SAM-V8. 4 line in / 8 output Voice
Distribution Module. Configured for up to 8 outlets each with up to
4 lines for basic telephone, fax, and modem service. Includes an
RJ31X interface for security alarm system and one jack for testing
and expansion.
2.3.3.1.1 Listed: UL and ULc.
2.3.3.1.2 Input: 4-pair 110 IDC.
2.3.3.1.3 Output: 4-pair 110 IDC to 8 outlets.
2.3.3.1.4 Alarm: RJ31X jack allows alarm auto-dialing access to
line 1.
2.3.3.1.5 Wiring: T568A.
2.3.3.1.6 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.3.2 Part Number: SAM-V8M. 4 line in / 8 output Modular Voice
Distribution Module. Configured for up to 8 RJ45 outlets for home
run terminations, each with up to 4 lines for basic telephone, fax
and modem service. Includes an RJ31X interface for a security/alarm
system and one test jack to test the service provider line and
internal lines.
2.3.3.2.1 Listed: UL and ULc.
2.3.3.2.2 Input: 4-pair 110 IDC.
2.3.3.2.3 Output: 8 RJ45 jacks.
2.3.3.2.4 Alarm: RJ31X jack allows alarm auto-dialing access to
line 1.
2.3.3.2.5 Wiring: T568A.
2.3.3.2.6 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.3.3 Part Number: SAM-V10. 4 line in / 10 output Voice
Distribution Module. Configured for up to 10 outlets each with up
to 4 lines of basic telephone, fax, and modem service. Includes an
RJ31X interface for a security/alarm system and one expansion/test
jack to either bridge service to a Voice Expansion Module or to
test the service provider and internal lines.
2.3.3.3.1 Listed: UL and ULc.
2.3.3.3.2 Input: 4-pair 110 IDC.
2.3.3.3.3 Output: 4-pair 110 IDC to 10 outlets.
2.3.3.3.4 Test/Expansion: 1 RJ45.
2.3.3.3.5 Alarm: RJ31X jack allows alarm auto-dialing access to
line 1.
2.3.3.3.6 Wiring: 568A.
2.3.3.3.7 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.3.4 Part Number: SAM-MP4. 4 line input / 6 output
multi-provider voice distribution module. Accepts up to four
incoming lines, routes them to six locations, and offers a security
system interface jack (for signal from an alarm panel) and test
jacks for input and output.
2.3.3.4.1 Listed: UL and ULc.
2.3.3.4.2 Input: 1 x 4-pair 110 IDC and 4 x RJ11.
2.3.3.4.3 Output: 6 x 4-pair 110 IDC.
2.3.3.4.4 Alarm: RJ45 jack (dip switch) allows alarm
auto-dialing access to line 1.
2.3.3.4.5 Wiring: T568A.
2.3.3.4.6 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25
mm).
2.3.4 Basis of Design: MediaMAX Video Modules as manufactured
and supplied by Suttle. Video splitter modules provide high quality
and reliable video distribution with industry approved, digital
ready splitters that meet ANSI/SCTE standards. Angled mounting
brackets maximize enclosure space, minimize cable strain, and
facilitate better cable management and ease of installation.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.3.4.1 Part Number: SAM-RF3. 1 x 3 RF splitter - 1 GHz.
2.3.4.1.1 Insertion Loss (Maximum): 7.0 dB.
2.3.4.1.2 Isolation (Minimum): 22 dB.
2.3.4.1.3 Return Loss In (Minimum): 20 dB.
2.3.4.1.4 Return Loss Out (Minimum): 20 dB.
2.3.4.2 Part Number: SAM-RF4. 1 x 4 RF splitter - 1G Hz.
2.3.4.2.1 Insertion Loss (Maximum): 8.0 dB.
2.3.4.2.2 Isolation (Minimum): 22 dB.
2.3.4.2.3 Return Loss In (Minimum): 20 dB.
2.3.4.2.4 Return Loss Out ((Minimum): 20 dB.
2.3.4.3 Part Number: SAM-RF6. 1 x 6 RF splitter - 1G Hz.
2.3.4.3.1 Insertion Loss (Maximum): 11.8 dB.
2.3.4.3.2 Isolation (Minimum): 22 dB.
2.3.4.3.3 Return Loss In (Minimum): 20 dB.
2.3.4.3.4 Return Loss Out ((Minimum): 20 dB.
2.3.4.4 Part Number: SAM-RF8. 1 x 8 RF splitter - 1G Hz.
2.3.4.4.1 Insertion Loss (Maximum): 12 dB.
2.3.4.4.2 Isolation (Minimum): 20 dB.
2.3.4.4.3 Return Loss In (Minimum): 20 dB.
2.3.4.4.4 Return Loss Out ((Minimum): 20 dB.
2.3.4.5 Part Number: SAM-RFH3. 1 x 3 RF splitter - 3 GHz.
2.3.4.5.1 Insertion Loss (Maximum): 11.2 dB.
2.3.4.5.2 Isolation (Minimum): 22 dB.
2.3.4.5.3 Return Loss In (Minimum): 12 dB.
2.3.4.5.4 Return Loss Out ((Minimum): 11 dB.
2.3.4.6 Part Number: SAM-RFH4. 1 x 4 RF splitter - 3 GHz.
2.3.4.6.1 Insertion Loss (Maximum): 12.5 dB.
2.3.4.6.2 Isolation (Minimum): 20 dB.
2.3.4.6.3 Return Loss In (Minimum): 12 dB.
2.3.4.6.4 Return Loss Out ((Minimum): 12 dB.
2.3.4.7 Part Number: SAM-RFH6. 1 x 6 RF splitter - 3 GHz.
2.3.4.7.1 Insertion Loss (Maximum): 14.5 dB.
2.3.4.7.2 Isolation (Minimum): 22 dB.
2.3.4.7.3 Return Loss In (Minimum): 13 dB.
2.3.4.7.4 Return Loss Out ((Minimum): 13 dB.
2.3.4.8 Part Number: SAM-RFH8. 1 x 8 RF splitter - 3 GHz.
2.3.4.8.1 Insertion Loss (Maximum): 15 dB.
2.3.4.8.2 Isolation (Minimum): 20 dB.
2.3.4.8.3 Return Loss In (Minimum): 13 dB.
2.3.4.8.4 Return Loss Out ((Minimum): 12 dB.
2.3.4.9 Frequency Range: 5 to 2400 MHz.
2.3.4.10 RFI Shielding: 130 dB.
2.3.4.11 Operating Temperature: Minus 40 to 140 degrees F.
2.3.4.12 "F" Ports: Meet ANSI/SCTE 02.
** NOTE TO SPECIFIER ** Delete dimension option not
required.
2.3.4.13 Dimensions for SAM-RF3 (HxWxD): 3.0 x 6.5 x 2.0 in (76
x 165 x 51 mm).
2.3.4.14 Dimensions: (HxWxD): 2.75 x 6.5 x 2.8 in (70 x 165 x 71
mm).
2.3.5 Basis of Design: SOHO Access 8-port Universal Patch Module
as manufactured and supplied by Suttle. For custom patch
configurations for patching phone, data, video or even fiber using
SpeedStar connectors. A great solution for accommodating
CorroShield corrosion protection jacks, or CAT6 jacks that aren't
available in a typical patch panel.
2.3.5.1 Part number: SAM-SP8. 8-port universal patch panel.
2.3.5.2 Listed UL and ULc.
2.3.5.3 For use with SOHO Access Enclosures.
2.3.5.4 Phone, Data, Video, or even fiber patching on a single
panel.
2.3.5.5 Mix and Match SpeedStar jacks to get exactly what is
needed.
2.3.5.6 CAT6 capable with STAR6000C6 jacks.
2.3.5.7 Accepts SpeedStar CorroShield jacks for added corrosion
protection in humid environments.
2.3.5.8 Dimensions (HxWxD): 3.5 x 6.5 x 3 in (89 x 165 x 76
mm).
2.3.6 Basis of Design: 3 in (76 mm) Blank Mounting Plate as
manufactured and supplied by Suttle.
2.3.6.1 Part number: SAM-B.
2.3.6.2 Blank mounting plate for MediaMAX Panels and SOHO Access
enclosures.
2.3.6.3 Includes double-stick adhesive foam and mounting
pins.
2.3.6.4 Dimensions (HxW): 3 x 5.5 in (76 x 140 mm) mounting
surface.
2.3.7 Basis of design: Push-Pin Replacement Kit (10 pieces) as
manufactured and supplied by Suttle.
2.3.7.1 Part Number: SAM-NYL.
2.3.7.2 Replacement push-pins, plungers and grommets.
2.3.7.3 One package of 10 push-pins.
2.3.7.4 Tool-less push-pin fasteners.
2.3.7.5 Plastic composition does not interfere with wireless
devices.
2.3.7.6 Quickly secure modules, brackets, and equipment shelves
into MediaMAX Panels.
** NOTE TO SPECIFIER ** Delete article if not required.
2.4 PATCH PANELS
2.4.1 Basis of Design: Patch panel as manufactured and supplied
by Suttle. Steel construction with rolled edges to eliminate
flexing. Rear input connectors are 110 IDC, front output jacks are
RJ-45. Connectors can be wired in either 568A or 568B
configurations.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.4.1.1 Part Number: STAR19110C6-12. 12-port, CAT6 patch panel,
568A/B wiring, wall-mount (bracket included) - 3.25 H x 10 W x 2 D
in (83 H x 254 W x 51 D mm).
2.4.1.2 Part Number: STAR19110C6-24. 24-port, CAT6 patch panel,
568A/B wiring, 19 in (483 mm) rack-mountable - 1RU 19 in (483 mm)
rack.
2.4.1.3 Part Number: STAR19110C6-48. 48-port, CAT6 patch panel,
568A/B wiring, 19 in (483 mm) rack-mountable - 2RU 19 in (483 mm)
rack.
2.4.1.4 Part Number: STAR191RU-12B. 12-port blank patch panel
accepts all SpeedStar Modular Jacks (Copper, Fiber and Coax) and
includes an integrated cable management bracket.
2.4.1.4.1 Accessories:
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.4.1.4.2 1.)Part Number: STAR6000C6T. MediaMAX Jack - Tool-less
Category 6 Jack
2.4.1.4.3 2.)Part Number: 2-7001. CAT5e Modular Data Jack
2.4.1.4.4 3.)Part Number: 2-7005. CAT3 Modular Voice Jack
2.4.1.4.5 4.)Part Number: STAR600V6-RC. CAT3 Modular Voice Jack
with CorroShield gel.
2.4.1.4.6 5.)Part Number: STAR500F-C. 3GHz F81 Barrel
Connector
2.4.1.4.7 6.)Part Number: STAR500SCGR-T. SC Fiber Adapter with
trap door kit
2.4.1.5 Listed: UL and ULc.
2.4.1.6 Exceeds TIA/EIA-568-B Cat 6 performance
specifications.
2.4.1.7 Supports bandwidth beyond 250 MHz.
2.4.1.8 Write-on label and number designations provide easy
identification.
2.4.1.9 Rear cable management bar provides cable strain
relief.
2.4.1.10 Multiple cable tie locations facilitate cable
dressing.
2.4.1.11 Wiring: T568A or T568B.
2.4.1.12 Insertion: greater than 750 cycles.
2.4.1.13 Jack Housing: High impact, flame retardant
thermoplastic, UL 94-V0 (indoor) rated.
2.4.1.14 IDC Blocks: Tin lead plated connector accepts 22-26 AWG
solid UTP cable.
2.4.1.15 Contact Pressure: Greater than 0.22 lbs (100
grams).
2.4.1.16 Insulation Resistance: 500 megohms.
2.4.1.17 Contact Resistance: Less than 10 millohms.
2.4.1.18 Voltage/Current: Less than 140 VDC at 1.5 amps.
2.4.1.19 Dielectric Withstand: greater than 1000 VAC RMS at
60Hz.
2.4.1.20 Safety: Complies with Part 68, FCC Rules.
** NOTE TO SPECIFIER ** Delete article if not required.
2.5 JACKS
** NOTE TO SPECIFIER ** Delete basis of design options not
required.
2.5.1 Basis of Design: SpeedStar CAT5e Modular Data Jack as
manufactured and supplied by Suttle. Exceeds TIA/EIA 568-C.2
specifications for Category 5e component performance. For use with
SpeedStar faceplates, bezels and surface mount housings.
Termination requires use of a punch down installation tool.
Available in a white housing, each jack comes with multi-color
bezels for your installation.
2.5.1.1 Part Number: 2-7001. 8-Position, 8-Conductor Jack,
568A/B, 110 IDC Block.
** NOTE TO SPECIFIER ** Delete color options not required.
2.5.1.2 Color: Green.
2.5.1.3 Color: Electrical ivory.
2.5.1.4 Color: Red.
2.5.1.5 Color: Yellow.
2.5.1.6 Color: Blue.
2.5.1.7 Color: Light almond.
2.5.1.8 Color: White.
2.5.1.9 Color: Orange.
2.5.1.10 Listed: UL and ULc.
2.5.1.11 Easy installation from rear of faceplate.
2.5.1.12 Compatible with SpeedStar products (bezels, faceplates,
and surface mount housings).
2.5.1.13 Terminates with standard 110 termination tools.
2.5.1.14 Dust covers for IDC terminations.
2.5.1.15 Wiring: 568A or 568B.
2.5.1.16 Insertion Life: 750 insertions.
2.5.1.17 Housing: High impact, flame retardant thermoplastic, UL
94-V0 (indoor) rated.
2.5.1.18 Contacts: 50 micro-inch (0.00127 mm) hard gold plating
minimum with 100 micro-inch (0.00254 mm) nickel.
2.5.1.19 Contact Pressure: greater than 0.22 lbs (0.22 lbs (100
grams).
2.5.1.20 Contact Resistance: Less than 10 milliohms.
2.5.1.21 Insulation Resistance: Greater than 500 megohms.
2.5.1.22 Current/Voltage:
2.5.1.22.1 140 VDC at 1.5 amps (2-7001).
2.5.1.22.2 140 VDC at 2 amps (STAR600V6 and 8),
2.5.1.23 Dielectric Withstand: 1000 VAC RMS at 60Hz.
2.5.2 Basis of Design: SpeedStar CAT3 Modular Voice Jack as
manufactured and supplied by Suttle. Provide a modular solution for
delivering multiple lines of voice service. Jacks with CorroShield
gel protects against corrosion that can lead to loss of service and
costly service calls. For use with SpeedStar faceplates, bezels and
surface mount housings. The jack terminates up to 3-pair of 22 to
26 AWG wire.
** NOTE TO SPECIFIER ** Delete part number option not
required.
2.5.2.1 Part Number: 2-7005. 6-Position, 6-Conductor Jack, 110
IDC Block.
2.5.2.2 Part number: STAR600V6-RCB. 6-Position, 6-Conductor Jack
with Corroshield gel, 110 IDC Block.
** NOTE TO SPECIFIER ** Delete color options not required.
2.5.2.3 Color: Green.
2.5.2.4 Color: Electrical ivory.
2.5.2.5 Color: Red.
2.5.2.6 Color: Yellow.
2.5.2.7 Color: Blue.
2.5.2.8 Color: Light almond.
2.5.2.9 Color: White.
2.5.2.10 Color: Orange.
2.5.2.11 Listed: UL and ULc.
2.5.2.12 Easy installation from rear of faceplate.
2.5.2.13 Compatible with SpeedStar products (bezels, faceplates,
and surface mount housings.
2.5.2.14 Terminates with standard 110 termination tools.
2.5.2.15 Dust covers for IDC terminations.
2.5.2.16 CorroShield gel equipped jacks protects from dust,
moisture, and other components.
2.5.2.16.1 Gelguard gel in the CorroShield products, is a
nonhazardous mixture per OSHA's Hazard Communications Standard (29
CFR 1910.1200). An MSDS is not required. A product safety bulletin
is available upon request.
2.5.2.17 Wiring: USOC.
2.5.2.18 Insertion Life: 750 insertions.
2.5.2.19 Housing: High impact, flame retardant thermoplastic, UL
94-V0 rated.
2.5.2.20 Contacts: 50 micro-inch (0.00127 mm) hard gold plating
minimum with 100 micro-inch (0.00254 mm) nickel.
2.5.2.21 IDC Blocks: Tin lead plated connector accepts 22-26 AWG
solid and stranded UTP cable.
2.5.2.22 Wire Retention:
2.5.2.22.1 Horizontal AWG: 8 lbs (3.63 kg).
2.5.2.22.2 Vertical pullout force: 2 lbs (0.91 kg).
2.5.2.23 Contact Pressure: Greater than 0.22 lbs (0.22 lbs (100
grams).
2.5.2.24 Contact Resistance: Less than 10 milliohms.
2.5.2.25 Insulation Resistance: Greater than 500 megohms.
2.5.2.26 Current/Voltage:
2.5.2.26.1 140 VDC at 1.5 amps (2-7005).
2.5.2.26.2 140 VDC at 2 amps (STAR600V6 and 8).
2.5.2.27 Dielectric Withstand: 1000 VAC RMS at 60Hz minimum.
2.5.3 Basis of Design: SpeedStar SC Adapter with trap door as
manufactured and supplied by Suttle. Provides instant coupling of
fiber connectors within a miniature housing. The integrated
spring-loaded trap door automatically closes when a SC connector is
not connected or is removed, shielding potentially harmful laser
light. Its design enables the adapter to be installed into any
SpeedStar faceplate or housing allowing for the product to be
integrated into many different form factors and a variety of
different architectures.
** NOTE TO SPECIFIER ** Delete part number option not
required.
2.5.3.1 Part Number: STAR500SCGR-T. SC adapter with trap
door.
2.5.3.2 Part Number: STAR500HSC-T. SC adapter housing with trap
door only, no SC adapter.
** NOTE TO SPECIFIER ** Delete color option not required.
2.5.3.3 Color: Electrical ivory.
2.5.3.4 Color: White.
2.5.3.5 Integrated trap door shields potentially harmful laser
light.
2.5.3.6 SpeedStar design allows for use in a wide variety of
products for maximum flexibility.
2.5.3.7 Materials: High impact flame retardant thermoplastic, UL
94-V0 (indoor) rated.
2.5.3.8 Connector Type: SC / SC simplex fiber coupler.
2.5.3.9 Cable Retention: Greater than 15 lbs (6.8 kg).
2.5.3.10 Back Reflection (typical - limit): 65 dB - minus 60
dB.
2.5.3.11 Insertion Loss (typical - limit): 0.1 dB - 0.3 dB.
2.5.4 Basis of Design: CAT6 Modular Data Jack as manufactured
and supplied by Suttle. Performance exceeding TIA/EIA-568-C.2
channel and link standards. Provides quicker and easier wire
termination. Angled IDC connector pins aid in maintaining maximum
Category 6 performance, providing a gas tight connection and
improved cable retention.
** NOTE TO SPECIFIER ** Delete part number option not
required.
2.5.4.1 Part Number: STAR6000C6. Category 6 jack, 8-position,
8-conductor module.
2.5.4.2 Part Number: STAR6000C6-SB. Category 6 jack, 8-position,
8-conductor module.
** NOTE TO SPECIFIER ** Delete color options not required.
2.5.4.3 Color: Green.
2.5.4.4 Color: Electrical ivory.
2.5.4.5 Color: Red.
2.5.4.6 Color: Yellow.
2.5.4.7 Color: Blue.
2.5.4.8 Color: Light almond.
2.5.4.9 Color: White.
2.5.4.10 Color: Orange.
2.5.4.11 Listed: UL and ULc.
2.5.4.12 Terminates with standard 110 termination tools.
2.5.4.13 Modules are compatible with SpeedStar or Series 2000
line of bezels, faceplates and surface mount housings.
2.5.4.14 IDC Cap provides protective strain relief.
2.5.4.15 Easy installation from rear of faceplate.
2.5.4.16 Complies with Part 68 of the FCC Rules and the
requirements adopted by the ACTA.
2.5.4.17 Wiring: 568A/568B color-coded labeling for easy wire
identification.
2.5.4.18 Insertion Life: 750 insertions.
2.5.4.19 Housing: High impact, flame retardant thermoplastic, UL
94-V0 (indoor) rated.
2.5.4.20 Contacts: 100 micro-inch nickel with minimum 50
micro-inch of gold.
2.5.4.21 IDC Blocks: Tin lead plated connector accepts 22 to 26
AWG solid UTP cable.
2.5.4.22 Contact Pressure: Greater than 0.22 lbs (100
grams).
2.5.4.23 Contact Resistance: Less than 10 milliohms.
2.5.4.24 Insulation Resistance: Greater than 500 megohms.
2.5.4.25 Voltage/Current: 140 VDC at 2.0 amps.
2.5.4.26 Dielectric Withstand: 1000 VAC RMS at 60 Hz.
2.5.5 Basis of Design: MediaMAX Jack - Tool-less Category 6 Jack
as manufactured and supplied by Suttle. Performance exceeding
TIA/EIA-568-C.2 channel/link and component standards. Provides
consistent, reliable, and easier wire termination. IDC with
tool-less toggle connections aid in maintaining maximum Category 6
performance, providing a gas tight connection and improved cable
retention.
2.5.5.1 Part Number: STAR6000C6T. Category 6 jack, 8-position,
8-conductor module, tool-less IDC with 8 color-coded bezels.
** NOTE TO SPECIFIER ** Delete color options not required.
2.5.5.2 Color: Green.
2.5.5.3 Color: Electrical ivory.
2.5.5.4 Color: Red.
2.5.5.5 Color: Yellow.
2.5.5.6 Color: Blue.
2.5.5.7 Color: Light almond.
2.5.5.8 Color: White.
2.5.5.9 Color: Orange.
2.5.5.10 Listed to UL and ULc.
2.5.5.11 Allows mounting to both SpeedStar and generic keystone
wall plates.
2.5.5.12 Tool-less toggle eliminates individual wire punch-down
and provides consistent IDC termination.
2.5.5.13 Unique "dual-toggle" design helps preserve wire twist
during assembly.
2.5.5.14 Jack installs easily from rear of wall plate.
2.5.5.15 Complies with TIA 1096 (formerly Part 68 of FCC
Rules).
2.5.5.16 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.5.5.17 Individually packaged with assorted color-coded
bezels.
2.5.5.18 No extra parts required for wire termination.
2.5.5.19 No excess wire trimming required.
2.5.5.20 Wiring: 568A or 568B color-coded labeling for easy wire
identification.
2.5.5.21 Insertion Life: 750 insertions.
2.5.5.22 Contacts: 50 micro-inch nickel with minimum 50
micro-inch of gold.
2.5.5.23 IDC Blocks: Tool-less toggles.
2.5.5.24 Conductor size: 22 to 24 gauge.
2.5.5.25 Contact Pressure: Greater than 0.22 lbs (100
grams).
2.5.5.26 Contact Resistance: Less than 10 milliohms.
2.5.5.27 Insulation Resistance: Greater than 500 megohms.
2.5.5.28 Voltage/Current: 140 VDC at 2.0 amps.
2.5.5.29 Dielectric Withstand: 1000 VAC RMS at 60 Hz.
2.5.6 Basis of Design: MediaMAX Category 6A 10 Gig Data Jack as
manufactured and supplied by Suttle. Performance exceeding
TIA/EIA-568-C.2 channel/link and component standards. Universal
jack solution. Color coding bezels for network identification.
Punch down functionality reducing material cost while providing
ease of set-up and installation.
2.5.6.1 Part Number: STAR6APDJ. Category 6A 10 Gig data jack,
8-position, 8-conductor jack, 568/B wiring, 110 DC connections,
includes color-coded bezels.
2.5.6.2 Part Number: STAR6APDJ-BP. Package of 20 jacks and 25
white bezels - Bulk pack.
2.5.6.3 Part Number: STARBEZ. Package of 25 color-coded bezels.
Package contains 25 of the same color bezels
** NOTE TO SPECIFIER ** Delete color options not required.
2.5.6.4 Color: Green.
2.5.6.5 Color: Electrical ivory.
2.5.6.6 Color: Red.
2.5.6.7 Color: Yellow.
2.5.6.8 Color: Blue.
2.5.6.9 Color: Light almond.
2.5.6.10 Color: White.
2.5.6.11 Color: Orange.
2.5.6.12 Standards Compliance:
2.5.6.12.1 Listed to UL and ULc.
2.5.6.12.2 Part 68 of FCC Rules and requirements adopted by the
ACTA.
2.5.6.12.3 Exceeds Category 6A TIA/EIA-568-C.2 specifications
for channel and link performance.
2.5.6.13 Angled IDC Pins: Aid in maintaining maximum Cat 6A
performance. Provides a gas tight connection and improved cable
retention.
2.5.6.14 Termination Tools: Standard 110.
2.5.6.15 Compatible with Suttle SpeedStar bezels, faceplates and
surface mount housings.
2.5.6.16 IDC Cap: Provides protective strain relief.
2.5.6.17 Easy installation from rear of faceplate
2.5.6.18 Wiring: 568A or 568B color-coded labels facilitate
termination.
2.5.6.19 Insertion Life: 750 insertions.
2.5.6.20 Housing: High impact, flame retardant thermoplastic, UL
94V-0 (indoor) rated.
2.5.6.21 Contacts: 100 micro-inch nickel with minimum 50
micro-inch of gold.
2.5.6.22 IDC Blocks: Tin lead plated connector accepts 22-24 AWG
solid UTP cable.
2.5.6.23 Contact Pressure: Greater than 0.22 lbs (100
grams).
2.5.6.24 Contact Resistance: Less than 20 milliohms.
2.5.6.25 Insulation Resistance: Greater than 500 megohms.
2.5.6.26 Pin to Pin Voltage: 1000 Volts DC or AC peak, 0.5 mA
leakage current.
2.5.6.27 Pin to Shield Voltage: 1500 Volts DC or AC peak, 0.5 mA
leakage current.
2.5.6.28 Fault Current:
2.5.6.28.1 600 Volts AC, 2.2 Amps, 50 to 60 Hz, 30 minutes.
2.5.6.28.2 700 Volts AC, 7.0 Amps, 50 to 60 Hz, 5 seconds.
** NOTE TO SPECIFIER ** Delete article if not required.
2.6 FACEPLATES
** NOTE TO SPECIFIER ** Delete paragraph options not
required.
2.6.1 Downward Facing Plates:
** NOTE TO SPECIFIER ** Delete basis of design paragraph options
not required.
2.6.1.1 Basis of Design: Downward Oriented Faceplates as
manufactured and supplied by Suttle. Employs jacks mounted at a 90
degree downward allowing cables to be run down, and out, at a much
lower risk to damage. Smooth, shatter-resistant faceplate protects
installation from collateral damage.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.1.1.1 Part Number: 2-6500. Single gang plate with 4 insert
styles.
2.6.1.1.2 Part Number: 2-6501. Single gang plate with 2-port F81
insert, connectors not included.
2.6.1.1.3 Part Number: 2-6502. Single gang plate with 2-port
SpeedStar insert, connectors not included.
2.6.1.1.4 Part Number: 2-6503. Single gang plate with CablePass
feed-through insert.
2.6.1.1.5 Part Number: 2-6504. Single gang plate with
F81/SpeedStar insert, connectors not included.
2.6.1.1.6 Part Number: 2-6522D. Double gang plate with 3-port
SpeedStar insert, connectors not included.
2.6.1.1.7 Part Number: 2-6523D. Double gang plate with CablePass
feed-through
** NOTE TO SPECIFIER ** Delete color option not required.
2.6.1.1.8 Color: Electric ivory.
2.6.1.1.9 Color: White.
2.6.1.1.10 Listed: UL and ULc.
2.6.1.1.11 Accommodates:
2.6.1.1.12 1.)F81 barrel connectors.
2.6.1.1.13 2.)SpeedStar connectors.
2.6.1.1.14 3.)CablePass feed-through.
2.6.1.1.15 New construction or replacement of existing
plates.
2.6.1.1.16 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.1.1.17 Dimensions:
2.6.1.1.18 1.)Single Gang (HxWxD): 5.04 x 3.13 x 1 in (128 x 80
x 25 mm).
2.6.1.1.19 2.)Double Gang (HxWxD): 5.04 x 5 x 1 in (128 x 127 25
mm).
2.6.1.2 Basis of Design: Fiber Interface Wall Plate as
manufactured and supplied by Suttle. In-home fiber interconnect
point in a compact single gang size. Allows flexibility in access
and storage. Access options include inside connections or external
connections at end or at an angle.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.1.2.1 Part Number: CON-13X5-85. Single gang fiber wall plate
with two covers, SC/APC adapter and splice holder inside with fiber
storage.
2.6.1.2.2 Part Number: CON-13X6-85. Single gang fiber wall plate
with two covers, a SC/APC adapter exiting the right side at an
angle, and splice holder inside with fiber storage.
2.6.1.2.3 Part Number: CON-13X5-85U. Single gang fiber wall
plate with two covers, SC/UPC adapter and splice holder inside with
fiber storage.
2.6.1.2.4 Part Number: CON-44X7-50. Single gang fiber wall plate
with one cover, SC/APC adapter one blank exiting the right side,
and internal splice holder with fiber storage.
2.6.1.2.5 Part Number: CON-44X7-85. Single gang fiber wall plate
with one cover, fiber adapter one blank exiting the right side, and
internal splice holder with fiber storage.
2.6.1.2.6 Listed: UL and ULC.
2.6.1.2.7 Junction box mounting platform.
2.6.1.2.8 Fiber slack storage spool with up to 5 ft (1524 mm) of
0.118 in (3 mm) fiber slack storage.
2.6.1.2.9 Can be configured for fiber connection accessible from
outside or protected inside the cover.
2.6.1.2.10 Snap on cover with security screw.
2.6.1.2.11 Vertical or horizontal distribution.
2.6.1.2.12 Angled or straight exit.
2.6.1.2.13 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.1.2.14 Dimensions (HxWxD): 4.9 x 3.5 x 1.2 in (124 x 89 x 30
mm).
2.6.1.3 Basis of Design: Convergence Wall Plate as manufactured
and supplied by Suttle. For managing multiple cable types within a
facility. Direct surface mounting on a wall or over an existing
single or double gang junction box, with versions for managing
connections with twisted pair wire (voice and data), coax cable or
fiber cable. Ideal for managing inputs and outputs for FTTH
deployments using desktop ONTs. Compatible with SpeedStar
connectors.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.1.3.1 Part number: CON-2216. Configured for use with a coax
splitter (1x2, 1x3, 2x2, 2x3) or ground block and an external
SC/APC adapter port, internal fiber management spools, and blanks
for two additional SpeedStar connectors (voice or data jacks).
2.6.1.3.2 Part number: CON-2221. Configured with 6 blank
openings on bottom for use with SpeedStar connectors (voice and
data jacks, SC/APC fiber adapter) and fiber management spools.
** NOTE TO SPECIFIER ** Delete color option not required.
2.6.1.3.3 Color: Electrical Ivory.
2.6.1.3.4 Color: White.
2.6.1.3.5 Standards Compliance:
2.6.1.3.6 1.)Listed: UL and ULc.
2.6.1.3.7 Distribution point for any combination of cabling
(Fiber, Coax, Twisted Pair).
2.6.1.3.8 Configurations with slack management for up to 6 ft
(1829 mm) of 900 im, 0.063 in (1.6 mm), 0.118 in (3 mm), and 0.189
in (4.8 mm) fiber optic cable.
2.6.1.3.9 Supports fiber adapters, voice jacks, data jacks and
coax splitters or ground blocks together in a compact wall
plate.
2.6.1.3.10 Convenient knockouts on cover and base.
2.6.1.3.11 Designed to use SpeedStar voice and data jacks.
2.6.1.3.12 Entry hole to allow a No. 10 AWG ground wire for coax
devices (when configured for coax).
2.6.1.3.13 Slotted key mounting holes to prove easy installation
onto a j-box.
2.6.1.3.14 Captive 3/8 in (9 mm) hex screw to secure the cover
to the base with 216-tool.
2.6.1.3.15 Fiber Adapter: SC/APC.
2.6.1.3.16 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.1.3.17 Dimensions (HxWxD): 5.5 x 6.5 x 1.5 in (140 x 165 x
38 mm).
2.6.1.4 Basis of Design: Flush Mount Open Back Retrofit Box as
manufactured and supplied by Suttle. Flush mount retrofit junction
box with open back, rotating clamp arms.
2.6.1.4.1 Part Number: 147-2.
2.6.1.4.2 Flush mount.
2.6.1.4.3 Rotating clamp arms.
2.6.1.4.4 Open back.
2.6.1.4.5 For retrofit applications.
2.6.2 Flush Mounting Faceplates:
** NOTE TO SPECIFIER ** Delete basis of design paragraph options
not required.
2.6.2.1 Basis of Design: SpeedStar Single and Double Gang Smooth
Faceplates: as manufactured and supplied by Suttle. For use with
SpeedStar modular multimedia connectors. Each housing provides
simple snap-in connector installation. Mounts over standard J-box
(mounting screws included).
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.2.1.1 Part Number: 2-2501. 1-port faceplate, single gang,
smooth finish.
2.6.2.1.2 Part Number: 2-2502. 2-port faceplate, single gang,
smooth finish.
2.6.2.1.3 Part Number: 2-2503. 3-port faceplate, single gang,
smooth finish.
2.6.2.1.4 Part Number: 2-2504. 4-port faceplate, single gang,
smooth finish.
2.6.2.1.5 Part Number: 2-2504A. Angled 4-port faceplate, single
gang, smooth finish.
2.6.2.1.6 Part Number: 2-2506. 6-port faceplate, single gang,
smooth finish.
2.6.2.1.7 Part Number: 2-2501M. 1-port faceplate, oversized,
single gang, smooth finish.
2.6.2.1.8 Part Number: 2-2502M. 2-port faceplate, oversized,
single gang, smooth finish.
2.6.2.1.9 Part Number: 2-2503M. 3-port faceplate, oversized,
single gang, smooth finish.
2.6.2.1.10 Part Number: 2-2504M. 4-port faceplate, oversized,
single gang, smooth finish.
2.6.2.1.11 Part Number: 2-2501-S. 1-port faceplate, single gang,
stainless steel.
** NOTE TO SPECIFIER ** Delete color option not required.
2.6.2.1.12 Color: Electrical Ivory.
2.6.2.1.13 Color: White.
2.6.2.1.14 Listed: UL and ULc
2.6.2.1.15 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated and 22 AWG stainless steel.
2.6.2.1.16 Dimensions (HxWxD):
2.6.2.1.17 1.)Single Gang: 4.57 x 2.81 in (116 x 71 mm).
2.6.2.1.18 2.)Oversized: 4.875 x 3.125 x 0.2 in (124 x 79 x 5
mm).
2.6.2.1.19 3.)Single Gang (Stainless): 4.5 x 2.75 x 0.29 (114 x
70 x 7 mm).
2.6.2.2 Basis of Design: SpeedStar Modular Multimedia
Faceplates: as manufactured and supplied by Suttle.
Commercial-grade faceplates for use with Suttle's line of
rear-loading snap-in multimedia modules and colored bezels. Rugged,
textured faceplates feature top and bottom label locations for
quick identification.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.2.2.1 Part Number: STAR500S1. 1-port, single gang.
2.6.2.2.2 Part Number: STAR500S2. 2-port, single gang.
2.6.2.2.3 Part Number: STAR500S4. 4-port, single gang.
2.6.2.2.4 Part Number: STAR500S6. 6-port, single gang.
2.6.2.2.5 Part Number: STAR500AF. 4-port angled, single
gang.
** NOTE TO SPECIFIER ** Delete color option not required.
2.6.2.2.6 Color: Electrical Ivory.
2.6.2.2.7 Color: White.
2.6.2.2.8 Listed: UL and ULc.
2.6.2.2.9 Standard or insert style faceplates for flexible
configuration.
2.6.2.2.10 Fits standard NEMA boxes.
2.6.2.2.11 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.2.2.12 Dimensions (HxWxD): 4.72 x 2.75 x 0.63 in (120 x 70 x
16 mm).
2.6.2.3 Basis of Design: SpeedStar Mounting Frame, 2-Port as
manufactured and supplied by Suttle. Fit standard floor and wall
J-Box designs and utilize standard electrical faceplates. For use
with Suttle's line of rear-loading snap-in multimedia modules and
colored bezels.
** NOTE TO SPECIFIER ** Delete part number option not
required.
2.6.2.3.1 Part Number: STAR1062. 2-port mounting frame.
2.6.2.3.2 Part Number: 860A. Duplex electrical style
faceplate.
** NOTE TO SPECIFIER ** Delete color option not required.
2.6.2.3.3 Color: Electrical Ivory.
2.6.2.3.4 Color: White.
2.6.2.3.5 Listed: UL and ULc.
2.6.2.3.6 Fits standard NEMA boxes and electrical
faceplates.
2.6.2.3.7 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.2.3.8 Write on label designations for easy
identification.
2.6.2.3.9 Available in 2 or 4-ports.
2.6.2.3.10 Modules snap-fit from the rear.
2.6.2.3.11 Inserts provide versatile module configuration
options.
2.6.2.4 Basis of Design: SpeedStar Barrel Connector 3GHz F81 as
manufactured and supplied by Suttle.
2.6.2.4.1 For SpeedStar faceplates and housings.
2.6.2.4.2 Type F connector.
2.6.2.4.3 Frequency Range: 5 to 3000 MHz.
2.6.2.5 Basis of Design: SpeedStar Blank Connector Insert as
manufactured and supplied by Suttle.
2.6.2.5.1 Part Number: STAR500B.
** NOTE TO SPECIFIER ** Delete color option not required.
2.6.2.5.2 Color: Electrical Ivory.
2.6.2.5.3 Color: White.
2.6.2.5.4 Fits SpeedStar faceplates, wall plates, and
housings.
2.6.2.6 Basis of Design: Blank Faceplate, Single Gang as
manufactured and supplied by Suttle. Flush mount design. Fits
industry-standard J boxes. Includes color-matched mounting
screws.
** NOTE TO SPECIFIER ** Delete part number option not
required.
2.6.2.6.1 Part Number: 107. Single gang blank faceplate.
2.6.2.6.2 Part Number: 108. Double gang blank faceplate.
** NOTE TO SPECIFIER ** Delete color option not required.
2.6.2.6.3 Color: Electrical Ivory.
2.6.2.6.4 Color: White.
2.6.2.6.5 Standards Compliance:
2.6.2.6.6 1.)Listed: UL and ULc.
2.6.2.6.7 2.)Conforms to NEMA and ANSI standards.
2.6.2.6.8 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.2.7 Basis of Design: SpeedStar Oversized Surface Mounting
Box as manufactured and supplied by Suttle. Countoured to match
SpeedStar faceplates but oversized to accommodate most faceplates.
Rear cable entry and mounting holes to fit most brackets and tear
outs on top, bottom and sides for raceway entry. Mounting over a
standard outlet box requires a 43A bracket.
** NOTE TO SPECIFIER ** Delete part number option not
required.
2.6.2.7.1 Part Number: STARMBD. SpeedStar single gang oversized
mounting box; includes two mounting screws and one adhesive
pad.
2.6.2.7.2 1.)Dimensions (HxWxD): 5.25 x 3.34 x 2.25 in (133 x 85
x 57 mm).
2.6.2.7.3 Part Number: STARMBDD. SpeedStar double gang oversized
mounting box; includes two mounting screws and one adhesive
pad.
2.6.2.7.4 1.)Dimensions (HxWxD): 5.25 x 5.34 x 2.25 in(133 x 136
x 57 mm).
** NOTE TO SPECIFIER ** Delete color options not required.
2.6.2.7.5 Color: Electrical Ivory.
2.6.2.7.6 Color: Light almond.
2.6.2.7.7 Color: White.
2.6.2.7.8 Applications: Copper, coax and fiber.
2.6.2.7.9 Race way knockouts: 4 sides.
2.6.2.7.10 Faceplate Mounting: Threaded insert, 2 places.
2.6.2.7.11 Can be mounted on a flat surface.
2.6.2.7.12 Cable may be dressed on all sides, or through the
back.
2.6.2.7.13 Supports STAR500S, STAR5501, STAR500AF, STAR5501MM
and 107 faceplates.
2.6.2.7.14 1.)The outside contour matches SpeedStar face plates.
However, the box is oversized to fit most conventional rectangular
single gang faceplates.
2.6.2.7.15 Complies with TIA/EIA 568-A Cable Bend Radius.
2.6.2.8 Basis of Design: Wall Jack Assembly as manufactured and
supplied by Suttle. For use with wall mounted, 8-conductor modular
telephone sets. The stainless steel cover assembly has two lugs,
which mate with the corresponding keyhole slots in the telephone
base plate or adapter. Includes a STAR600B Channel Six Performance
Jack Module wired 568B and matching bezel. Exceeds TIA/EIA-568-B.2
specifications for Category 5e component performance.
2.6.2.8.1 Part Number: STAR630B8. 8-Position, 8-Conductor, 568B,
110 IDC Block jack module, stainless steel faceplate.
2.6.2.8.2 Listed: UL and ULc.
2.6.2.8.3 Terminates with standard 110 termination tools.
2.6.2.8.4 Dust covers for IDC terminations.
2.6.2.8.5 Wiring: 568B pinout.
2.6.2.8.6 Insertion Life: 750 insertions.
2.6.2.8.7 Housing: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.2.8.8 Contacts: 50 micro-inch (0.00127 mm) hard gold plating
minimum with 100 micro-inch (0.00254 mm) nickel.
2.6.2.8.9 Connection: Binding screws.
2.6.2.8.10 Contact Pressure: Greater than 0.22 lbs (100
grams).
2.6.2.8.11 Insulation Resistance: Greater than 500 megohms.
2.6.2.8.12 Contact Resistance: Less than 10 milliohms.
2.6.2.8.13 Current/voltage: Less than 140 VDC at 2 amps.
2.6.2.9 Basis of Design: SpeedStar Flush Mount Connector Kits as
manufactured and supplied by Suttle. Combine a faceplate with one
or two voice grade, data, voice/data or gel filled, connectors with
bezels. Flush mounting smooth finished faceplates that are
compatible with SpeedStar modular connectors. Snap-in connector
installation with colored bezels for identification. Mounts over
standard J-box (mounting screws included).
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.2.9.1 Part Number: STAR2501-G1-52 Kit. 1-port faceplate with
one gel filled STAR600V6-RCB voice grade connector. Electrical
ivory.
2.6.2.9.2 Part Number: STAR2501-G1-85 Kit. 1-port faceplate with
one gel filled STAR600V6-RCB voice grade connector. White.
2.6.2.9.3 Part Number: STAR2502-G2-52 Kit. 2-port faceplate with
two gel filled STAR600V6-RCB voice grade connectors. Electrical
ivory
2.6.2.9.4 Part Number: STAR2502-G2-85 Kit. 2-port faceplate with
two gel filled STAR600V6-RCB voce grade connectors. White.
2.6.2.9.5 Part Number: STAR2501-V1-52 Kit. 1-port faceplate with
one 2-7005 voice grade connector. Electrical ivory.
2.6.2.9.6 Part Number: STAR2501-V1-85 Kit. 1-port faceplate with
one 2-7005 voice grade connector. White.
2.6.2.9.7 Part Number: STAR2502-V2-52 Kit. 2-port faceplate with
two 2-7005 voice grade connectors. Electrical ivory.
2.6.2.9.8 Part Number: STAR2502-V2-85 Kit. 2-port faceplate with
two 2-7005 voice grade connectors. White.
2.6.2.9.9 Part Number: STAR2501-D1-52 Kit. 1-port faceplate with
one STAR6000C6T data connector. Electrical ivory.
2.6.2.9.10 Part Number: STAR2501-D1-85 Kit. 1-port faceplate
with one STAR6000C6T data connector. White.
2.6.2.9.11 Part Number: STAR2502-D2-52 Kit. 2-port faceplate
with two STAR6000C6T data connectors. Electrical ivory.
2.6.2.9.12 Part Number: STAR2502-D2-85 Kit. 2-port faceplate
with two STAR6000C6T data connectors. White.
2.6.2.9.13 Part Number: STAR2502-DV-52 Kit. 2-port faceplate
with one STAR6000C6T data and one 2-7005 voice grade connector.
Electrical ivory.
2.6.2.9.14 Part Number: STAR2502-DV-85 Kit. 2-port faceplate
with one STAR6000C6T data and one 2-7005 voice grade connector.
White.
2.6.3 Surface Mount Faceplates:
** NOTE TO SPECIFIER ** Delete basis of design options not
required.
2.6.3.1 Basis of Design: SpeedStar Barrel Connector 3GHz F81 as
manufactured and supplied by Suttle.
2.6.3.1.1 For SpeedStar faceplates and housings.
2.6.3.1.2 Type F connector.
2.6.3.1.3 Frequency Range: 5 to 3000 MHz.
2.6.3.2 Basis of Design: SpeedStar Surface Mount Housings as
manufactured and supplied by Suttle. Available in several
configurations for use with Suttle's line of SpeedStar modular
multimedia connectors. Snap-in connector installation with the use
of versatile insert plates. Mounted with screws or double-sided
adhesive pad.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.3.2.1 Part Number: STAR558. 1- or 2-port surface mount
housing.
2.6.3.2.2 1.)Dimensions (HxLxW): 1.17 x 2.70 x 2.50 in (30 x 69
x 64 mm).
2.6.3.2.3 Part Number: STAR107SM. Up to 3-port surface mount
housing.
2.6.3.2.4 1.)Dimensions (HxLxW): 1.03 x 3.25 x 2.625 in (26 x 83
x 67 mm).
** NOTE TO SPECIFIER ** the two following items are not
available in the light almond color.
2.6.3.2.5 Part Number: STAR108SM. Up to 6-port surface mount
housing.
2.6.3.2.6 1.)Dimensions (HxLxW): 1.03 x 6.17 x 2.625 in (26 x
157 x 67 mm).
2.6.3.2.7 Part Number: STARMMB. Up to 12-port surface mount
housing.
2.6.3.2.8 1.)Dimensions (HxLxW): 1.20 x 5.60 x 6.75 in (30 x 142
x 171 mm).
** NOTE TO SPECIFIER ** Delete color options not required.
2.6.3.2.9 Color: Electrical Ivory.
2.6.3.2.10 Color: Light almond.
2.6.3.2.11 Color: White.
2.6.3.2.12 Listed: UL and ULc.
2.6.3.2.13 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.6.3.3 Basis of design: Wall Mount Adaptort DSL Filter as
manufactured and supplied by Suttle. Manage all connectivity in one
plate. Smooth faceplate jacks visibly labeled "DATA" and "VIDEO"
above each port respectively allowing user to distinguish between
them.
2.6.3.3.1 Part Number: 2-5001-FC-C6. 2-port faceplate, single
gang, one "Data" and one "Video" labeled port. Smooth finish.
** NOTE TO SPECIFIER ** Delete color options not required.
2.6.3.3.2 Color: Electrical Ivory.
2.6.3.3.3 Color: White.
2.6.3.3.4 Listed: UL and ULc.
2.6.3.3.5 Attractive one piece design.
2.6.3.3.6 Smooth, non-textured surface and rounded corners with
painted head screws to match the faceplate.
2.6.3.3.7 Data jacks rated up to CAT6.
2.6.3.3.8 Connections to jacks are 110 IDC.
2.6.3.3.9 F connector 3GHz SCTE compliant.
2.6.3.3.10 Data Inputs: 8 conductor, CAT6.
2.6.3.3.11 Data Outputs: 110 IDC.
2.6.3.3.12 Video Inputs and Outputs: F81 barrel connectors.
2.6.3.3.13 1.)Standards: SCTE 02 compliant.
2.6.3.3.14 2.)Materials: Nickel plated free spinning brass.
2.6.3.3.15 3.)Frequency: 5-3000 MHz.
2.6.3.3.16 Wiring Data: TS68A.
2.6.3.3.17 Dimensions (LxW): 4.57 x 2.81 in (116 x 71 mm).
2.6.3.4 Basis of Design: Surface Mount Connector Kits as
manufactured and supplied by Suttle. Combine a housing with one or
two voice grade, data, voice/data or gel filled, connectors with
bezels. Configurable for SpeedStar modular connectors. Attach using
screws or double-sided adhesive pad. Includes snap-in 1 or 2 port
insert plates for a custom installation.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.6.3.4.1 Part Number: STAR558-G1-52 Kit. 1-port faceplate with
one gel filled STAR600V6-RCB voice grade connector. Electrical
ivory.
2.6.3.4.2 Part Number: STAR558-G1-85 Kit. 1-port faceplate with
one gel filled STAR600V6-RCB voice grade connector. White.
2.6.3.4.3 Part Number: STAR558-G2-52 Kit. 2-port faceplate with
two gel filled STAR600V6-RCB voice grade connectors. Electrical
ivory
2.6.3.4.4 Part Number: STAR558-G2-85 Kit. 2-port faceplate with
two gel filled STAR600V6-RCB voce grade connectors. White.
2.6.3.4.5 Part Number: STAR558-V1-52 Kit. 1-port faceplate with
one 2-7005 voice grade connector. Electrical ivory.
2.6.3.4.6 Part Number: STAR558-V1-85 Kit. 1-port faceplate with
one 2-7005 voice grade connector. White.
2.6.3.4.7 Part Number: STAR558-V2-52 Kit. 2-port faceplate with
two 2-7005 voice grade connectors. Electrical ivory.
2.6.3.4.8 Part Number: STAR558-V2-85 Kit. 2-port faceplate with
two 2-7005 voice grade connectors. White.
2.6.3.4.9 Part Number: STAR558-D1-52 Kit. 1-port faceplate with
one STAR6000C6T data connector. Electrical ivory.
2.6.3.4.10 Part Number: STAR558-D1-85 Kit. 1-port faceplate with
one STAR6000C6T data connector. White.
2.6.3.4.11 Part Number: STAR558-D2-52 Kit. 2-port faceplate with
two STAR6000C6T data connectors. Electrical ivory.
2.6.3.4.12 Part Number: STAR558-D2-85 Kit. 2-port faceplate with
two STAR6000C6T data connectors. White.
2.6.3.4.13 Part Number: STAR558-DV-52 Kit. 2-port faceplate with
one STAR6000C6T data and one 2-7005 voice grade connector.
Electrical ivory.
2.6.3.4.14 Part Number: STAR558-DV-85 Kit. 2-port faceplate with
one STAR6000C6T data and one 2-7005 voice grade connector.
White.
2.6.3.5 Basis of Design: MediaMAX Decorator Faceplates as
manufactured and supplied by Suttle. Designed to match and enhance
modern look designs while reducing the number of assembly
components.
2.6.3.5.1 Standards Compliance: Listed to UL and ULc.
2.6.3.5.2 Simple snap-in connector installation.
2.6.3.5.3 Mount over standard J-box or low voltage bracket.
2.6.3.5.4 Compatible with all SpeedStar connectors.
2.6.3.5.5 Compatible with all SpeedStar color bezels for color
coding.
2.6.3.5.6 Materials: UL 94V-O Thermoplastic
2.6.3.5.7 Dimensions: Single Gang (H W x D): 4.57 x 2.81 x 0.2
inch (116 x 71 x 5 mm)
2.6.3.5.8 Screw-On, One-Piece White Faceplates:
2.6.3.5.9 1.)Part Number: FD-11-SCR-85. 1-port MediaMAX
faceplate, single gang.
2.6.3.5.10 2.)Part Number: FD-12-SCR-85. 2-port MediaMAX
faceplate, single gang.
2.6.3.5.11 3.)Part Number: FD-14-SCR-85. 4-port MediaMAX
faceplate, single gang.
2.6.3.5.12 Snap-On Two-Piece White Faceplates:
2.6.3.5.13 1.)Part Number: FD-11-SNO-85. 1-port MediaMAX
faceplate, single gang.
2.6.3.5.14 2.)Part Number: FD-12-SNO-85. 2-port MediaMAX
faceplate, single gang.
2.6.3.5.15 3.)Part Number: FD-14-SNO-85. 4-port MediaMAX
faceplate, single gang.
** NOTE TO SPECIFIER ** Delete article if not required.
2.7 ACCESSORlES
** NOTE TO SPECIFIER ** Delete paragraphs not required.
2.7.1 Couplers and Adapters:
** NOTE TO SPECIFIER ** Delete basis of design options not
required.
2.7.1.1 Basis of Design: 2-line Split and Bridge Inline Adapter
as manufactured and supplied by Suttle. Four-conductor to
2/2/4-conductor, designed for connecting two items to an existing
2-line modular jack separating each line out to the center pair on
its own jack while allowing a third item access to both lines.
2.7.1.1.1 Part Number: 173.
2.7.1.1.2 Labeling: L1 / L2 / L1 and L2.
2.7.1.2 Basis of Design: Inline T Adapters - 267 Series as
manufactured and supplied by Suttle. Connect two telephones or
associated equipment items to an existing modular jack. Allow for
quick connection of two devices at a single jack location without
rewiring.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.7.1.2.1 Part Number: 267A4. 2 for 1 inline modular adapter,
4-conductor to 4/4-conductor.
2.7.1.2.2 Part Number: 267A. 2 for 1 inline modular adapter,
4-conductor to 6/6-conductor.
2.7.1.2.3 Part Number: 267B. Inline modular adapter, single
4-contact jack wired for termination of 2 lines.
2.7.1.2.4 Part Number: 267C. Inline modular adapter, Voice
labeled: PHONE, Data labeled: MODEM.
2.7.1.2.5 Part Number: 267E. 2 for 1 inline modular adapter,
6-conductor to 6/6-conductor.
2.7.1.2.6 Listed: UL and ULc.
2.7.1.2.7 Modifies circuitry without rewiring.
2.7.1.2.8 Allows multiple connections from a single modular
jack.
2.7.1.2.9 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.7.1.2.10 Contact Pressure: Greater than 0.22 lbs (100
grams).
2.7.1.2.11 Insulation Resistance: Greater than 500 megaohms.
2.7.1.2.12 Contact Resistance: Less than 10 milliohms.
2.7.1.2.13 Current/Voltage: 140 VDC at 2 Amps.
2.7.1.3 Basis of Design: 4-line Split Inline Adapter as
manufactured and supplied by Suttle. Eight-conductor to
4/4-conductor, splits eight conductor premise wiring into two,
four-conductor modular outputs.
2.7.1.3.1 Part Number: 400E.
2.7.1.3.2 Input: RJ61.
2.7.1.3.3 Output: RJ14.
2.7.1.3.4 Labeling: PAIR 1 and 2 / PAIR 3 and 4.
2.7.1.4 Basis of Design: 2 for 1, 8-conductor Inline Adapter as
manufactured and supplied by Suttle. Eight-conductor plug to
8/8-conductor jacks, designed for connecting two items to an
existing modular jack.
2.7.1.4.1 Part Number: 400S-50.
2.7.1.4.2 Input: RJ61.
2.7.1.4.3 Output: RJ61.
2.7.1.5 Basis of Design: 4-line Split Coupling Adapter as
manufactured and supplied by Suttle. Four-line split coupling
modular adapter, 8-conductor to 4/4-conductor, designed for
splitting 4-lines on an 8-position jack into 2-lines on two
6-position jacks.
2.7.1.5.1 Part Number: 450A.
2.7.1.5.2 4 voice lines.
2.7.1.5.3 Input: RJ61 jack.
2.7.1.5.4 Output: RJ14 jack.
2.7.1.5.5 Labeling: PAIR 1 and 2 / PAIR 3 and 4.
2.7.1.6 Basis of Design: Telephony Couplersas manufactured and
supplied by Suttle.An in-line device for connecting and/or
extending two modular plug-ended line cords. Extends modular
circuits without the hassle and expense of hardwired connecting
blocks.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.7.1.6.1 Part Number: 159MC-4. 4-conductor coupler, reverse
wiring, ivory housing.
2.7.1.6.2 Part Number: 159MC-6. 6-conductor coupler, reverse
wiring, ivory housing.
2.7.1.6.3 Part Number: 159MC-8A. 8-conductor coupler, straight
wiring, gray housing.
2.7.1.6.4 Part Number: 159MC-8B. 8-conductor coupler, reverse
wiring, gray housing.
2.7.1.6.5 Listed: UL and ULc.
2.7.1.6.6 Reverse or straight through wiring.
2.7.1.6.7 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.7.1.6.8 Contacts: Spring tempered phosphor-bronze 0.018 inch
(0.46 mm) diameter 50 micro-inch (0.00127 mm) hard gold plating
minimum 100 micro-inch (0.00254 mm) underplate with sulfamate
nickel.
2.7.1.6.9 Contact Pressure: 0.22 lbs (0.22 lbs (100 grams)
minimum.
2.7.1.6.10 Insulation Resistance: 500 megaohms.
2.7.1.6.11 Contact Resistance: 10 milliohms maximum.
2.7.1.6.12 Voltage/Current: 140 VDC at 2 amps.
2.7.2 Fiber Accessories:
2.7.2.1 Basis of Design: SpeedStar SC Adapter with trap door as
manufactured and supplied by Suttle. Adapter provides instant
coupling of fiber connectors within a miniature housing. The
integrated spring-loaded trap door automatically closes when a SC
connector is not connected or is removed, shielding potentially
harmful laser light. Enables the adapter to be installed into any
SpeedStar faceplate or housing allowing for the product to be
integrated into many different form factors and a variety of
different architectures.
** NOTE TO SPECIFIER ** Delete part number option not
required.
2.7.2.1.1 Part number: STAR500SCGR-T SpeedStar SC adapter with
trap door.
2.7.2.1.2 Part number: STAR500HSC-T SpeedStar SC adapter housing
with trap door only, no SC adapter.
** NOTE TO SPECIFIER ** Delete color option not required.
2.7.2.1.3 Color: Electrical Ivory.
2.7.2.1.4 Color: White.
2.7.2.1.5 Integrated trap door shields potentially harmful laser
light.
2.7.2.1.6 Design allows for use in a wide variety of products
for maximum flexibility.
2.7.2.1.7 Material: High impact, flame retardant thermoplastic,
UL 94-V0 (indoor) rated.
2.7.2.1.8 Connector Type: SC / SC simplex fiber coupler.
2.7.2.1.9 Cable Retention: Greater than 15 lbs (6.8 kg).
2.7.2.1.10 Back Reflection (typical - limit): 65 dB to minus 60
dB.
2.7.2.1.11 Insertion Loss (typical - limit): 0.1 dB to 0.3
dB.
2.7.3 Inline xDSL Filters:
** NOTE TO SPECIFIER ** Delete basis of design options not
required.
2.7.3.1 Basis of Design: 1-line wall mount adapter DSL filter -
Ivory as manufactured and supplied by Suttle. Allows residential
alarm panels to take control of the main phone line via the RJ31X
or RJ38X connector. Blocks DSL service to the alarm panel while
providing uninterrupted DSL service to the household telephone
wiring. Designed to plug into a RJ31X jack, including other similar
jacks up to RJ38X.
2.7.3.1.1 Part Number: 900A.
2.7.3.1.2 Standards Compliance:
2.7.3.1.3 1.)Listed: UL and ULc.
2.7.3.1.4 2.)Part 68 of FCC Rules and requirements adopted by
the ACTA.
2.7.3.1.5 Customer installable.
2.7.3.1.6 Automated alarm dialer compatible high-speed Internet
device.
2.7.3.1.7 Stop-Band Isolation: Greater than 25 dB from 25 kHz to
1.2 MHz.
2.7.3.1.8 REN: 0.2 B (AC).
2.7.3.1.9 DC Resistance: Tip to tip, ring to ring; less than 20
Ohms.
2.7.3.1.10 Loading Capacity on Port: Less than 60 nF.
2.7.3.1.11 Attenuation Distortion: Less than 0.4 dB.
2.7.3.1.12 Dimensions (LxHxD): 3.0 x 1.0 x 0.8 in (76 x 25 x 20
mm).
2.7.3.2 Basis of Design: 2-Line Inline DSL Filter as
manufactured and supplied by Suttle. Connects between the wall jack
and voice device (e.g. phone, fax, answering machine, Caller ID)
providing a single filtered jack. Eliminate erratic impedance from
telephone equipment that interferes with DSL communications.
2.7.3.2.1 Part Number: 900LCC-2F-50.
2.7.3.2.2 Standards Compliance:
2.7.3.2.3 1.)Listed: UL and ULc.
2.7.3.2.4 2.)Part 68 of FCC Rules and requirements adopted by
the ACTA.
2.7.3.2.5 3.)ANSI T1. 421.
2.7.3.2.6 4.)Material: High impact, flame retardant
thermoplastic, UL 94-V0 (indoor) rated.
2.7.3.2.7 Two filtered lines (pins 3 and 4, 2 and 5).
2.7.3.2.8 Compatible with ADSL, ADSL2 plus, VDSL2 to 30 MHz
(data only).
2.7.3.2.9 Filter Topology: 2-pole low pass.
2.7.3.2.10 Contacts (plug and jacks): Minimum 50 micro-inch
(0.00127 mm) of gold and nickel.
2.7.3.2.11 Customer installable.
2.7.3.2.12 Dielectric Withstand: 1000 VDC for 1 minute.
2.7.3.2.13 REN: 0.1B (ac).
2.7.3.2.14 Series DC Resistance: Less than 20 ohms (T to R with
telephone port shorted).
2.7.3.2.15 Loading Capacity: 16 nF (T to R).
2.7.3.2.16 DC Loop Current: Operates from 0 to 90 mA.
2.7.3.2.17 Off-Hook Insertion Loss: Less than 0.2 dB at 1
KHz.
2.7.3.2.18 Off-Hook Insertion Loss Distortion: Less than 0.5 dB
(200 Hz to 4KHz).
2.7.3.2.19 Off-Hook Impedance Distortion:
2.7.3.2.20 1.)ERL greater than 9 dB.
2.7.3.2.21 2.)SRL-LO greater than 13 dB.
2.7.3.2.22 3.)SRL-HI greater than 3 dB.
2.7.3.2.23 Envelope Delay: Less than 100 us (300 Hz to 2.8
kHz).
2.7.3.2.24 Stopband Attenuation:
2.7.3.2.25 1.)Greater than or equal to 21 dB at 25 to 50
kHz.
2.7.3.2.26 2.)Greater than or equal to 25 dB at 50 kHz to 30
MHz.
2.7.3.2.27 Dimensions (HxWxD): 1 x 3.1 x 0.8 in (25 x 79 x 20
mm).
2.7.3.3 Basis of Design: Single-Line Inline DSL Filter as
manufactured and supplied by Suttle. Connects between the wall jack
and voice device (e.g. phone, fax, answering machine, Caller ID)
providing a single filtered jack. Eliminates erratic impedance from
telephone equipment that interferes with DSL communications.
2.7.3.3.1 Part Number: 900LCC-50.
2.7.3.3.2 Standards Compliance:
2.7.3.3.3 1.)Listed Ul and ULc.
2.7.3.3.4 2.)Complies with Part 68 of the FCC Rules and the
requirements adopted by the ACTA.
2.7.3.3.5 3.)ANSI T1. 421.
2.7.3.3.6 4.)Material: High impact, flame retardant
thermoplastic, UL 94-V0 (indoor) rated.
2.7.3.3.7 Compatible with ADSL, ADSL2 plus, VDSL2 to 30 MHz
(Data Only).
2.7.3.3.8 Filter topology: 2-pole low pass.
2.7.3.3.9 Contacts (Plug and Jacks): Minimum 50 micro-inch of
gold and nickel.
2.7.3.3.10 Customer installable.
2.7.3.3.11 Dielectric Withstand: 1000 VDC for 1 minute.
2.7.3.3.12 REN: 0.1B (ac).
2.7.3.3.13 Series DC Resistance: 20 ohms max. (T to R with
telephone port shorted).
2.7.3.3.14 Loading Capacity: 6 nF (T to R).
2.7.3.3.15 DC Loop Current: Operates from 0 to 90 mA.
2.7.3.3.16 Off-Hook Insertion Loss: Less than 0.2 dB at 1
KHz.
2.7.3.3.17 Off-Hook Insertion Loss Distortion: Less than 0.5 dB
(200 Hz to 4 KHz).
2.7.3.3.18 Off-Hook Impedance Distortion:
2.7.3.3.19 1.)ERL greater than 9 dB.
2.7.3.3.20 2.)SRL-LO greater than 13 dB.
2.7.3.3.21 3.)SRL-HI greater than 3 dB.
2.7.3.3.22 Envelope Delay: Less than 100 us (300 Hz to 2.8
kHz).
2.7.3.3.23 Stopband Attenuation:
2.7.3.3.24 1.)Greater than or equal to 21 dB at 25 kHz to 50
kHz.
2.7.3.3.25 2.)Greater than or equal to 25 dB at 50 kHz to 30
MHz.
2.7.3.3.26 Dimensions (HxWxD): 1.24 x 3.82 x .76 in (31 x 97 x
19 mm).
2.7.3.4 Basis of Design: 2-Line Inline Adapter DSL Filter as
manufactured and supplied by Suttle. Connects between the wall jack
and voice device (e.g. phone, fax, answering machine, Caller ID)
providing a filtered jack and an unfiltered jack. Filters eliminate
erratic impedance from telephone equipment that interfere with DSL
communications.
2.7.3.4.1 Part Number: 900LCCS-2F-50.
2.7.3.4.2 Standards Compliance:
2.7.3.4.3 1.)Listed Ul and ULc.
2.7.3.4.4 2.)Part 68 of the FCC Rules and the requirements
adopted by the ACTA.
2.7.3.4.5 3.)ANSI T1. 421.
2.7.3.4.6 Flame retardant thermoplastic per UL-94-V0.
2.7.3.4.7 Two filtered lines through one jack (pins 3 and 4, 2
and 5) and unfiltered signal through the other jack.
2.7.3.4.8 Compatible with ADSL, ADSL2 plus, VDSL2 to 30 MHz
(data only).
2.7.3.4.9 Filter topology: 2-pole low pass.
2.7.3.4.10 Contacts (plug and jacks) minimum 50 micro-inch
(0.00127 mm) of gold and nickel.
2.7.3.4.11 Customer installable.
2.7.3.4.12 Dielectric Withstand: 1 000 VDC for 1 minute.
2.7.3.4.13 REN: 0.1B (ac).
2.7.3.4.14 Series DC Resistance: 20 ohms max. (T to R with
telephone port shorted).
2.7.3.4.15 Loading Capacity: 16 nF (T to R).
2.7.3.4.16 DC Loop Current: Operates from 0 to 90 mA.
2.7.3.4.17 Off-Hook Insertion Loss: Less than 0.2 dB at 1
KHz.
2.7.3.4.18 Off-Hook Insertion Loss Distortion: Less than 0.5 dB
(200 Hz to 4 KHz).
2.7.3.4.19 Off-Hook Impedance Distortion:
2.7.3.4.20 1.)ERL greater than 9 dB.
2.7.3.4.21 2.)SRL-LO greater than 13 dB.
2.7.3.4.22 3.)SRL-HI greater than 3 dB.
2.7.3.4.23 Envelope Delay: Less than 100 us (300 Hz to 2.8
kHz).
2.7.3.4.24 Stopband Attenuation:
2.7.3.4.25 1.)Greater than or equal to 21 dB at 25 kHz to 50
kHz.
2.7.3.4.26 2.)Greater than or equal to 25 dB at 50 kHz to 30
MHz.
2.7.3.4.27 Dimensions (HxWxD): 1.62 x 2.65 x 0.93 in (41 x 67 x
24 mm).
2.7.3.5 Basis of Design: 1-line ADSL/ADSL2 plus Filter with
Unfiltered Jack as manufactured and supplied by Suttle. Plugs into
a wall jack providing separate ports for filtered voice (POTS) and
high-speed ADSL data signals. The filter/splitter has two jacks:
one (unfiltered) for a DSL modem and another (filtered) for a
voice-grade device (phone, fax, answering machine, etc.) It keeps
the voice-grade devices from interfering with the performance of
the DSL modem, and keeps noise from the data signal off the voice
devices.
2.7.3.5.1 Part Number: 900LCCS-50.
2.7.3.5.2 Standards Compliance:
2.7.3.5.3 1.)Listed Ul and ULc.
2.7.3.5.4 2.)Complies with Part 68 of the FCC Rules and the
requirements adopted by the ACTA.
2.7.3.5.5 3.)ANSI T1. 421.
2.7.3.5.6 4.)Material: High impact, flame retardant
thermoplastic, UL 94-V0 (indoor) rated.
2.7.3.5.7 Compatible with ADSL and ADSL2 plus.
2.7.3.5.8 Filter Topology: 2-pole low pass.
2.7.3.5.9 Contacts (Plug and Jacks) Minimum 50 micro-inch of
gold and nickel.
2.7.3.5.10 Customer installable.
2.7.3.5.11 Dielectric Withstand: 1000 VDC for 1 minute.
2.7.3.5.12 REN: 0.1B (ac).
2.7.3.5.13 Series DC Resistance: 20 ohms max. (T to R with
telephone port shorted).
2.7.3.5.14 Loading Capacity: 16 nF (T to R).
2.7.3.5.15 DC Loop Current: Operates from 0 to 90 mA.
2.7.3.5.16 Off-Hook Insertion Loss: Less than 0.2 dB at 1
KHz.
2.7.3.5.17 Off-Hook Insertion Loss Distortion: Less than 0.5dB
(200 Hz to 4 KHz).
2.7.3.5.18 Off-Hook Impedance Distortion:
2.7.3.5.19 1.)ERL greater than 9 dB.
2.7.3.5.20 2.)SRL-LO greater than 13 dB.
2.7.3.5.21 3.)SRL-HI greater than 3 dB.
2.7.3.5.22 Envelope Delay: Greater than 100 us (300 Hz to 2.8
kHz).
2.7.3.5.23 Stopband Attenuation:
2.7.3.5.24 1.)Greater than or equal to 21 dB at 25 kHz to 50
kHz.
2.7.3.5.25 2.)Greater than or equal to 25 dB at 50 kHz to 30
MHz.
2.7.3.5.26 Dimensions (HxWxD): 1.30 x 4.33 x .76 in (33 x 110 x
19 mm).
2.7.3.6 Basis of Design: 2-line filtered and auxiliary DSL jack
as manufactured and supplied by Suttle. Connects between the wall
jack and voice device (e.g. phone, fax, answering machine, Caller
ID) providing both an unfiltered DSL jack for DSL connection and a
filtered jack for a single line of voice device communications.
Filters isolate telephone equipment impedances from ADSL,
delivering high bandwidth ADSL transmission capabilities.
2.7.3.6.1 Part Number: 900LCS-2F-50E.
2.7.3.6.2 Standards Compliance:
2.7.3.6.3 1.)FCC registered; complies with Part 68.
2.7.3.6.4 2.)Material: High impact, flame retardant
thermoplastic, UL 94-V0 (indoor) rated.
2.7.3.6.5 Compatible with ADSL, ADSL2 plus, VDSL2 to 30 MHz
(data only).
2.7.3.6.6 Customer installable.
2.7.3.6.7 Filter topology: 2-pole low pass.
2.7.3.6.8 Contacts (Plug and Jacks) Minimum 50 micro-inch of
gold and nickel.
2.7.3.6.9 Two filtered lines through one jack (pins 3 and 4, 2
and 5) and unfiltered signal through the other jack.
2.7.3.6.10 Small, compact design.
2.7.3.6.11 Customer installable.
2.7.3.6.12 Dielectric Withstand: 1000 VDC for 1 minute.
2.7.3.6.13 REN: 0.1B (ac).
2.7.3.6.14 Series DC Resistance: 20 ohms max. (T to R with
telephone port shortened).
2.7.3.6.15 Loading Capacity: 40 nF (T to R).
2.7.3.6.16 DC Loop Current: Operates from 0 to 90 mA.
2.7.3.6.17 Off-hook Insertion Loss: Less than 0.2 dB at 1
KHz.
2.7.3.6.18 Off-hook Insertion Loss Distortion: Less than 0.5 dB
(200 Hz to 4 KHz).
2.7.3.6.19 Off-Hook Impedance Distortion:
2.7.3.6.20 1.)Network Port:
2.7.3.6.21 a.)ERL: greater than 10 dB.
2.7.3.6.22 b.)SRL-LO: greater than 12 dB.
2.7.3.6.23 c.)SRL-HI: greater than 5 dB.
2.7.3.6.24 2.)Phone Port:
2.7.3.6.25 a.)ERL: greater than 9 dB.
2.7.3.6.26 b.)SRL-LO: greater than 13 dB.
2.7.3.6.27 c.)SRL-HI: greater than 3 dB.
2.7.3.6.28 3.)Envelope Delay: Less than 100 us (300 Hz to 2.8
kHz).
2.7.3.7 Basis of Design: 1-line filtered and auxiliary DSL jack
as manufactured and supplied by Suttle. Connects between the wall
jack and voice device (e.g. phone, fax, answering machine, Caller
ID) providing both an unfiltered DSL jack for DSL connection and a
filtered jack for a single line of voice device communications.
Filters isolate telephone equipment impedances from ADSL,
delivering high bandwidth ADSL transmission capabilities.
** NOTE TO SPECIFIER ** Delete part number options not
required.
2.7.3.7.1 Part Number: 900LCS-2F-50E.
2.7.3.7.2 Part Number: 900LCS-50ETX. Spanish labels (1 per
pack).
2.7.3.7.3 Part Number: 04AG-003L000 Spanish labels (2 per
pack).
2.7.3.7.4 Standards Compliance:
2.7.3.7.5 1.)FCC registered; complies with Part 68.
2.7.3.7.6 2.)Material: High impact, flame retardant
thermoplastic, UL 94-V0 (indoor) rated.
2.7.3.7.7 Filter Topology: 2-pole low pass.
2.7.3.7.8 Contacts: Plug and Jacks - Minimum 50 micro-inch of
gold and nickel.
2.7.3.7.9 Small, compact design.
2.7.3.7.10 Customer installable.
2.7.3.7.11 Dielectric Withstand: 1000 VDC for 1 minute.
2.7.3.7.12 REN: 0.1B (ac).
2.7.3.7.13 Series DC Resistance: 20 ohms max. (T to R with
telephone port shortened).
2.7.3.7.14 Loading Capacity: 40 nF (T to R).
2.7.3.7.15 DC Loop Current: Operates from 0 to 90 mA.
2.7.3.7.16 Off-hook Insertion Loss: Less than 0.2 dB at 1
KHz.
2.7.3.7.17 Off-hook Insertion Loss Distortion: Less than 0.5 dB
(200 Hz to 4 KHz).
2.7.3.7.18 Off-Hook Impedance Distortion:
2.7.3.7.19 1.)Network Port:
2.7.3.7.20 a.)ERL: greater than 10 dB.
2.7.3.7.21 b.)SRL-LO: greater than 12 dB.
2.7.3.7.22 c.)SRL-HI: greater than 5 dB.
2.7.3.7.23 2.)Phone Port:
2.7.3.7.24 a.)ERL: greater than 9 dB.
2.7.3.7.25 b.)SRL-LO: greater than 13 dB.
2.7.3.7.26 c.)SRL-HI: greater than 3 dB.
2.7.3.7.27 3.)Envelope Delay: Less than 100 us (300 Hz to 2.8
kHz).
2.7.4 Modular Plugs:
** NOTE TO SPECIFIER ** Delete basis of design options not
required.
2.7.4.1 Basis of Design: 4-position, 4-conductor Modular Plug as
manufactured and supplied by Suttle. Meets FCC Part 68
requirements.
2.7.4.1.1 Part Number: 264. For handset cords.
2.7.4.2 Basis of Design: 6-position, 4-conductor Modular Plug as
manufactured and supplied by Suttle. Meets FCC Part 68
requirements.
2.7.4.2.1 Part Number: 266. For stranded wire.
2.7.4.3 Basis of Design: 6-position, 4-conductor Modular Plug
for Solid Wire as manufactured and supplied by Suttle. Meets FCC
Part 68 requirements.
2.7.4.3.1 Part Number: 266-4S. For solid wire only.
2.7.4.4 Basis of Design: 6-position, 6-conductor Modular Plug as
manufactured and supplied by Suttle. Meets FCC Part 68
requirements.
2.7.4.4.1 Part Number: 266-6. For stranded wire.
2.7.4.5 Basis of Design: 8-position, 8-conductor Keyed Modular
Plug as manufactured and supplied by Suttle. Meets FCC Part 68
requirements.
2.7.4.5.1 Part Number: 266-8K. For stranded wire. Keyed
plug.
2.7.4.6 Basis of Design: 8-position, 8-conductor Non-Keyed
Modular Plug as manufactured and supplied by Suttle. Meets FCC Part
68 requirements.
2.7.4.6.1 Part Number: 266-8NK. For stranded wire. Non-Keyed
plug.
2.7.5 Patch Cords:
2.7.5.1 Basis of Design: CAT6 Patch Cords as manufa