VERDICT GAUGE LIMITED, Cobbs Wood Industrial Estate, Hilton Road, Ashford, Kent TN23 1EW. Tel: (01233) 631554.Fax: (01233) 631888 2. ‘RAPID’ DIAL TEST INDICATORS The Verdict “Rapid” presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. “Rapids” incorporate a rear swivel spigot enabling use for centering without additional attachments. All models have dovetail clamping slides top and bottom. • Swivel spigot standard on all models WORM MECHANISM Stylus
13
Embed
‘RAPID’ DIAL TEST INDICATORS · 2016-10-19 · Indicator Swivel Set Dial indicator ruggedly constructed to meet the demands of the workshop and inspection departments. The indicator
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
The Verdict “Rapid” presents the dial face inclined to theworkpiece surface ensuring good visual accessibility obviatingparallax error. “Rapids” incorporate a rear swivel spigotenabling use for centering without additional attachments. Allmodels have dovetail clamping slides top and bottom.
• Swivel spigot standard on all models
WORMMECHANISM
Stylus
CALIBRATION AND INSPECTION SERVICE AVAILABLE
DIAL TEST INDICATORS
3.
Code 08/3001with
Automatic Reversal Movement
Dual Reading “Metrinch”
Direct reading Inch and Metric in either system
The Dual Reading “Metrinch”Answer to the Metric Conversion Problem
• Fitted with pear shaped contact point• Clamping facilities by means of dovetail or end spigot• Dial rotates for zero setting• Automatic reversal movement• Jewelled• Stylus swivels through an arc of 180o
• Hand travels in one direction• Lever pivots are mounted in ball bearings• Imperial instruments fitted with 1/4'' diameter spigot• Swivel spigot incorporated in body
Indicator body machined with dovetail to suit attachments 15/5010/4010, 15/5013 and 15/5050
T1, T2 and T3 indicators have a switch leverfor reversing the direction of movement.Lever pivots are mounted in ball bearings.Fitted with 4mm or 1/4'' dia.top spigot andholder body side clamp which accepts rodsup to 6.5mm (0.256'').Indicator body machined with dovetail to suitattachments.
T3 also supplied with a dovetail clamp.
T6 and G Indicators are designed around theneed for a long Stylus to overcome manymeasuring problems, supplied with roundpoint only.
T8 Dial Indicators incorporate an automatic reversal movement. Their rugged design and fine graduations provide maximum versatility for use in either the workshop or inspection department. Clamping facilities back and front by means of a dovetail andby a spigot at the top. Lever pivots are mounted in ball bearings.
• Dial rotates for zero setting • Jewelled• Stylus swivels through an arc of 180o
• Hand travels in two directions without need of a reversible lever• Swivel spigot incorporated in body• Fitted with pear-shaped stylus which obviates the cosine error
The following features are incorporated as standard throughout Models A and C.
• Main bodies are machined from high quality brass• Ratchet stylii are fitted and operated throughout an arc of 180o
• A switch lever is fitted for reversing movement • Dials are rotatable for zero setting
The Supertest Indicators have a reversiblescrewed adaptor provided at the rear of thebody for fitting direct to a surface gauge orsimilar stand. Dovetail Clamp, which alsoclamps on the Tubular Body, supplied asstandard.Designed for accurate indicating inmachining layout or inspection applications.Accepts all standard holders and jig borerattachments.• Jewelled• Fully reversible• Ratchet contact point swivels through 180o
• Dial rotates for zero setting• Furnished with Universal Holder, Body Clamp and
two contact points in a form fitting case
T2 T3
T6 G
A
H Supertest
T8
WORMMECHANISM
Code No. Face Dial Reading Grad. Range StylusDia. Length
Indicator Swivel SetDial indicator ruggedly constructed to meet the demands of the workshop and inspection departments. Theindicator is attached to a pot-magnet by means of a swivel ball and socket holder, enabling countless settingpositions to be achieved.• Shockproof, Ratchet Stylus mounting• Dial rotates for zero setting• Stylus swivels through an arc of 180o
• Supplied complete with extra 0.25'' dia. spigotfor use as an alternative method of fixing
These indicators have been introduced to our range tosimplify bore location and alignment when used inconjunction with a centering attachment. Designed with twodials set 180o apart, it eliminates the use of a mirror; thepointers are attached to the same spindle hence identicalreadings are maintained over the full range.
OPTIONAL EXTRA
SWIVEL SPIGOT
15/5017 1/4'' dia.15/4017 4mm dia.
Code Model Dial Read. Grad. Range StylusDia. Length
A combination set of the popular Model C Indicator, Dovetail Clamp, Minoring and aCollet Rod Attachment which can be utilised to meet almost every gaugingapplication required in the workshop. Indicator Reading 0.0005'' or 0.01mm. Eachset is supplied in an instrument carton.
Movement: independent unit (modern watches are madein the same way ).Not influenced by side pressure on instrument case.Readily interchangeable.
Stylus support: adjustable ball-bearings whichguarantee perfect stylus movement under all conditions.Reinforced flanges. Automatic reversal of measuringdirection by means of double lever system.Accuracy : DIN 879/1 and BS 2795:1957/1971
Stylus can be displaced: 210 0
Measuring force : max. 7oz (max. 20p )
Spare Stylii for T20/T21
Point dia. Code No.1mm 11/3001 (V95)2mm 11/3006 (V96)3mm 11/3011 (V97)
Perpendicular Type
Top mounted dial gives ease of reading when used forsetting- up on jig bores, milling machines etc.
Automatic reversal of measuring direction by means of adouble lever system.
Dovetails machined on three faces ensure secure and easypositioning.
Completely antimagnetic: Monobloc design
Accuracy: DIN 879/1 and BS 2795: 1957/1971
Spare Stylii for T22
Point dia. Code No:1mm 11/3016 (V98) CARBIDE ONLY
Code No: Model: Dia. of dial Reading Range Length of stylusEnglish
The DIACATOR is an instrument with a stationary indicator and a rotating probe for fast and accurate concentricalalignment of bores and shafts on most rotary machinetools.
Applications:
Concentrical alignment of boxes and shafts on milling,drilling and boring machines; Alignment of the footstock onmilling and cylindrical grinding machines and of thetailstock on lathes; Accurate concentrical alignment ofindexing heads and tables, of grinding fixtures, of drillsleeves in tool holders and of many other special fixtures.
Design Features:
The DIACATOR is mounted in two suspension ballbearings that render it entirely free from play. The probeyoke is provided with a safety clutch as a precautionagainst damage to the instrument should the probe hangup on some obstacle while in motion.
Advantages:
Contrary to other aligning methods, the machine is inmotion during the aligning operation. Thus alignment takes place under the same conditions (uniform oil film on spindlebearings and constant speed) as the subsequent work. The dial remains stationary and is positioned to face the operator sothat he may conveniently and accurately follow the process. During alignment the revolving probe and the working spindle form a single unit. Possible off centre of the tool chuck caused by an inaccurate chuck, closer, sleeve, etc , in no way influences the centering operation or its accuracy.
Code No. 63/6000
Chucking Possibilities:
8mm and 3/8'', 1/2'' and 5/8'' draw-in collet chuck; three or four jaw chuck; inside Morse taper No.1. For larger inside tapersuse standard taper sleeves.
Specifications:
Inside Diameter Range: 0.06'' to 4.72''(1.5 to 120mm)Outside Diameter Range: 0.04'' to 4.33''(1.0 to 110mm)
Standard Set Includes:
1 Dial Indicator1 Pendulum Probe 86''(22mm) (for small bores)2 Off-set Probes 98'' and 1.89''(25 and 48mm) 1 Screw-on Morse Taper No.13 Screw-on Spacers 3/8'', 1/2''and 5/8''or 10,12 and 16mm
(please specify choice when ordering)1 Stop-rod 160mm long (6-1/4'')1 Socket-head Wrench 0.08'' (2mm)1 Hardwood Case