ARAB CENTER FOR ENGINEERING STUDIES ACES …...(Specific Gravity), and Absorption of Fine Aggregate Street 41/Aggregate Testing Lab 1-Rex Dan Cumay -Ao 2 - Sachit Rai 3-Rommel Frando

This is to attest that

ARAB CENTER FOR ENGINEERING STUDIES ACES-DOHA INDUSTRIAL AREA STREET NO.41, GATE NO.197

P.O.BOX:19579, AHMED BIN ALI STREET DOHA 00974, STATE OF QATAR

Testing Laboratory TL-343

has met the requirements of AC89, IAS Accreditation Criteria for Testing Laboratories, and has demonstrated compliance with ISO/IEC Standard 17025:2017, General requirements for the competence of testing and calibration laboratories. This organization is accredited to provide the services specified in the scope of accreditation on the following page(s).

This certificate is valid up to January 1, 2021.

This accreditation certificate supersedes any IAS accreditation bearing an earlier effective date. The certificate becomes invalid upon suspension, cancellation or revocation of accreditation. See www.iasonline.org for current accreditation information, or contact IAS at 562-364-8201.

Raj Nathan President

http://www.iasonline.org/


International Accreditation Service, Inc.

3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A. Telephone +1 562-364-8201 — [email protected]

www.iasonline.org Page 1 of 112

IAS Accreditation Number TL-343 Company Name Arab Center for Engineering Studies ACES-Doha Address Industrial Area, Street No. 41, Gate No 197

P.O. Box 19579, Ahmed Bin Ali Street Doha 00974, State of Qatar

Contact Name Ghalab Al Zubi Telephone +974 44870161 Effective Date of Scope January 17, 2020 Accreditation Standard ISO/IEC 17025: 2017

PWA

No. Category Standard/ Method No. /Date

Standard/Method Title & Section

Location / Facility Authorized Technicians

1. 2.7 Aggregate AASHTO T112 and ASTM C142/ C142M

Standard Test Method for Clay Lumps and Friable Particles in Aggregates (Clay Lumps and Friable Particles in Aggregates)

Street 41/Aggregate Testing Lab

1-Mohamed jamal Jay-Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay 5-Yassine Hosni

2. 2.16 Aggregate AASHTO T304 Method A and ASTM C1252

Standard Test Methods for (Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading))


1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Manendra Mugrati 4. Mohamed Aslam 5. Gopal Pipera 6. Victor Chidiadi 7. Okoye Onyeka Etien 8. Dimith

http://www.ilac.org/



mailto:[email protected]







TL-343 Page 2 of 112 Arab Center for Engineering Studies ACES-Doha

PWA No. Category Standard/ Method

No. /Date Standard/Method Title &

Section Location /

Facility Authorized Technicians

3. 2.13 Aggregate ASTM C88and AASHTO T104

Soundness of Aggregates by Use of Magnesium Sulfate


1-Rex Dan Cumay-Ao 2-Jay-Ar Failano Lamarca 3-Jay-R Soleda Bueno 4-Okoye Onyeka Etien 5-Ian Bueno Janerol Bueno Janerol 6-Gopal Pippera 7-Sembo Tamong Kosimee (Qasim) 8-Peter Olurotimi Omoshuli

4. 2.4 Aggregate ASTM C 117 Standard Test Method for (Material Finer Than 75- μm (No. 200) Sieve in Mineral Aggregate by Washing)


1-Rex Dan Cumay-Ao 2-Sachit Rai 3-Rommel Frando Claridad 4-Amir Hasan 5-Upendra Kumar Nyaupane 6-Nishad Deepal Salanga Don 7-Salama Ragab Sulaiman 8-Nicanor Amarante Almendra 9-Aneesh Babu 10-Randy Vidad 11-Okoye Onyeka Etien

5. 2.8 Aggregate ASTM C123/C123M Lightweight particles in Aggregate


1. Rex Dan Cumay-Ao 2. Sachit Rai 3. Rommel Frando Claridad 4. Amir Hasan 5. Upendra Kumar Nyaupane 6. Nishad Deepal Salanga Don 7. Salama Ragab Sulaiman 8. Nicanor Amarante Almendra 9. Aneesh Babu 10. Randy Vidad 11. Okoye Onyeka Etien




Section Location /


6. 2.6 Aggregate ASTM C127 and AASHTO T 85

Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate


1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Amir Hasan 4. Manendra Mugrati 5. Nishad Deepal Salanga Don 6. Mohamed Aslam 7. Gopal Pipera 8. Victor Chidiadi 9. Okoye Onyeka Etien 10. Dimith 11. Salam Ragab Suliman

7. 2.5 Aggregate ASTM C128 and AASHTO T84

Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate


1-Rex Dan Cumay-Ao 2-Sachit Rai 3-Rommel Frando Claridad 4-Amir Hasan 5-Upendra Kumar Nyaupane 6-Nishad Deepal Salanga Don 7-Salama Ragab Sulaiman 8-Nicanor Amarante Almendra 9-Aneesh Babu 10-Randy Vidad 11-Okoye Onyeka Etien

8. 2.11 Aggregate ASTM C131/C131M and ASHTO T96

Standard Test Method for (Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine)






Section Location /


9. 2.3 Aggregate ASTM C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates (Particle Size Distribution)


1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Amir Hasan 4. Nishad Deepal Salanga Don 5. Salama Ragab Sulaiman 6. Aneesh Babu 7. Randy Vidad 8. Okoye Onyeka Etien

10. 2.12 Aggregate ASTM C535 Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine


Rex Dan Cumay-Ao Jay-Ar Failano Lamarca Jay-R Soleda Bueno Okoye Onyeka Etien Ian Bueno Janerol Bueno Janerol Gopal Pippera Sembo Tamong Kosimee (Qasim) Peter Olurotimi Omoshuli

11. Aggregate ASTM C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying


1. Rex Dan Cumay-Ao 2. Amir Hasan 3. Tohidul Islam Ashraful Islam 4. Upendra Kumar Nyaupane 5. Randy Vidad ( 2 )

12. 2.2 Aggregate ASTM C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size


1-Rex Dan Cumay-Ao 2-Amir Hasan 3-Tohidul Islam Ashraful Islam 4-Upendra Kumar Nyaupane 5-Randy Vidad 6-Jay Lamarca 7-Benezen Usman

13. 2.1 Aggregate ASTM D75/D75M Standard Practice for Sampling Aggregates


1-Rex Dan Cumay-Ao 2-Amir Hasan 3-Tohidul Islam Ashraful Islam 4-Upendra Kumar Nyaupane 5-Randy Vidad




Section Location /


14. 1.13 Aggregate ASTM D2419 and AASHTO T176

Standard Test Method for (Sand Equivalent Value of Soils and Fine Aggregate)


1. Sunday 2. Bles Molah 3. Mohammed Jamal. 4. Ahmed Rasheed. 5. Mohamad Aslam Nagoor 6.Abayomi Philip 7.Irshad Ansari 8.Arif Hussain 9.Victor Chidiadi 10. Massoud Kamel 11.Maskkor Mohamed anifa 12. Benizen Usman 13. Jay lamarca

15. 2.10 Aggregate ASTM D4791 Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate



16. 6.34 Aggregate ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate


1. Rommel Frando Claridad 2. Rex Dan Cumay-Ao 3. Sachit Rai Amir Hasan 4. Tohidul Islam Ashraful Islam 5. Upendra Kumar Nyaupane 6. Randy Vidad

17. 2.14 Aggregate ASTM D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate


1. Jay-Ar Failano Lamarca 2. Benzan usman 3. Manendra Mugrati 4. Mohamed Aslam 5. Gopal Pipera 6. Victor Chidiadi 7. Okoye Onyeka Etien 8. Dimith




Section Location /


18. 2.20 Aggregate BS 812-2 CL 5.3 Particle Density and Water Absorption (All Larger than 10mm Aggregate)


1. Jay-Ar Failano Lamarca 2. Ian Bueno 3. Jay-Ar soledo Bueno 4. Benzan usman 5. Gopal Pipera 6. Okoye Onyeka Etien 7. Sembo

19. 2.21 Aggregate BS 812-2 CL 5.4 Particle Density and Water Absorption (5-40mm Aggregate)



20. 2.22 Aggregate BS 812-2 CL 5.5 Particle Density and Water Absorption (10mm Aggregate and Smaller)



21. 2.17 Aggregate BS 812-102 Sampling of Aggregate Street 41/Aggregate Testing Lab

1. Rex Dan Cumay-Ao 2. Amir Hasan 3. Tohidul Islam Ashraful Islam 4. Upendra Kumar Nyaupane 5. Randy Vidad

22. 2.24 Aggregate BS 812-103.1-7.2 Particle Size Distribution (Wet)


1-Nicanor Amarante Tohidul Islam Ashraful Islam 2-Randy Vidad Mohamed Jamal Jay-Are




Section Location /


23. 2.25 Aggregate BS 812-103.1-7.3 Particle Size Distribution (Dry)


1-Nicanor Amarante Tohidul Islam Ashraful Islam 2-Randy Vidad Mohamed Jamal Jay-Are

24. 2.30 Aggregate BS 812-105.1 Method Of Determination of Particle Shap (Flakiness Index)



25. 2.32 Aggregate BS 812-105.2 Method Of Determination of Particle Shap (Elongation Index)



26. 2.18 Aggregate BS 812-109 CL 6 Testing aggregates - Methods for determination of moisture content (Oven Drying)






Section Location /


27. 2.33 Aggregate BS 812-110 Testing aggregates (Methods Determination of Aggregate Crushing Value)


1-Mohamed jamal Jay- Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay

28. 2.34 Aggregate BS 812-111 Determination of Ten Percent Value



29. 2.35 Aggregate BS 812-112 Determination of Aggregate Impact Value


1. Rex Dan Cumay-Ao 2. Jay-Ar Failano Lamarca 3. Jay-R Soleda Bueno 4. Okoye Onyeka Etien 5. Ian Bueno Janerol Bueno Janerol 6. Gopal Pippera 7. Sembo Tamong Kosimee (Qasim) 8. Peter Olurotimi Omoshuli

30. 2.37 Aggregate BS 812-117 Determination of Water Street 41/ Chemical Section

1. Saleem Kalathil 2. Muneer MC

31. 2.38 Aggregate BS 812-117 App. C Determination of Chloride Content (Acid Extract)

Street 41/Chemical Section


32. 2.39 Aggregate BS 812-118 Determination of Sulphate Content

Street 41/Chemical Section





Section Location /


33. Aggregate BS EN 932-1 Tests for general properties of aggregates. (Methods for sampling)



34. Aggregate BS EN 932-2 Tests for general properties of aggregates. (Methods for reducing laboratory samples)



35. 2.23 Aggregate BS EN 933-1 Tests for geometrical properties of aggregates - Determination of particle size distribution — Sieving method (Particle Size Distribution)


1-Mohamed jamal Jay- Are 2-Bles Sunday 3-Ahmed Rasheed suddesh Sudhakaran 4-Rex Dan cumay Rommel Claridad Onikay 5-Yassine Hosni

36. 2.26 Aggregate BS EN 933-1 Tests for geometrical properties of aggregates - Determination of particle size distribution — Sieving method (Material Finer than 0.075mm)



37. 2.27 Aggregate BS EN 933-1 CL A.4.4

Tests for geometrical properties of aggregates - Determination of particle size distribution — Sieving method (Material Finer than 0.063mm)






Section Location /


38. 2.29 Aggregate BS EN 933-3 Determination of particle shape — Flakiness index



39. 2.31 Aggregate BS EN 933-4 Tests for geometrical properties of aggregates Determination of particle shape. Shape index



40. 2.28 Aggregate BS EN 933-7 Determination of shell content. Percentage of shells in coarse aggregates



41. 1.30 Aggregate BS EN 933-8 Assessment of fines — Sand equivalent test


1-Tohidul Islam Ashraful Islam 2-Sunday Ifeanyichukwu Izukwe 3-Mohammed Gamal Abdulradi Alsayed 4-Mohammed Abdulhamid Abdulalim Ali 5-Esosa Simeon Omwanghe




Section Location /


42. Aggregate BS EN 1097-1 (QCS 2014 Section 29)

Determination of the resistance to wear (micro- Deval)


1. Sunday 2. Bles Molah 3. Mohammed Jamal. 4. Ahmed Rasheed. 5.Mohamad Aslam Nagoor 6.Abayomi Philip 7.Irshad Ansari 8.Arif Hussain 9.Victor Chidiadi 10. Massoud Kamel 11.Maskkor Mohamed anifa

43. Aggregate BS EN 1097-2 CL 5 Tests for mechanical and physical properties of aggregates (Determination of resistance to fragmentation by the Los Angeles test method)



44. Aggregate BS EN 1097-3 Tests for mechanical and physical properties of aggregates (Determination of loose bulk density and voids)



45. 2.19 Aggregate BS EN 1097-6 Determination of particle density and water absorption of Aggregate






Section Location /


46. Aggregate BS EN 1367-2 Tests for thermal and weathering properties of aggregates. (Magnesium sulphate test)



47. Aggregate BS EN 1367-4 Tests for thermal and weathering properties of aggregates (Determination of Drying shrinkage)



48. 6.51 Aggregate BS EN 12697-2 Determination of Particle Size Distribution






Section Location /


49. 6.37 Asphalt AASHTO PP 60 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

Street 41/Asphalt section

1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 12. Alim 13. Madzwin

50. 6.38 Asphalt AASHTO PP61 Developing Dynamic Moduluys Master Curves Using AMPT


1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Alfie allauigan abenojar 4. M. H. Aslam 5. Mohamed umar ansari

51. Asphalt AASHTO R30 Mixture Conditioning of Hot-Mix Asphalt (HMA),


1. Roy Mobeen 2. Alfy Yassin 3. Kareem Ehab Nabil 4. Manjula Manoj Amunuwela Gedara 5. Piyal Kumara 6. Rizwan Majeedu 7. Mohammed Ghaffair Lijin Punnoli




Section Location /


52. Asphalt AASHTO R47 Practice for Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size.


1. Ehab nabil abdelfattah fayed 2. Piyal kumara pathirana nape 3. Ndukaroy igwebueze 4. Walid taher abderahman diab 5. Alfie allauigan abenojar 6. Khaleel ahmed 7. M. H. Aslam 8. Mohamed razak mohamed rizwan 9. Julbasir s. Kamdon 10. Salifou ndima'ah sufah 11. Peter olurotimi omoshuli 12. Abdquadri opeyemi bashorun 13.Edwin chikeh nwachukwu 14. Mohamed arafat mohideen pichchai 15. Julbasir s. Kamdon 16. Yasir arafat 17. Bed bahadur thapa 18. Mohamed umar ansari 19. Bhola nath jaisi poudel 20. Birendra mahato nuniya

53. Asphalt AASHTO R83L Preparation of Cylindrical Performance Test Specimens Using the Superpave Gyratory Compactor (SGC)


1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3. Alfie allauigan abenojar 4. M. H. Aslam 5. Mohamed umar ansari 6. Noura Absaad




Section Location /


54. Asphalt AASHTO T166 - Method A

Bulk Specific Gravity ( ) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens


1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3.Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 15. Alim 16. Madzwin




Section Location /


55. Asphalt AASHTO T209 - Method A

Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm ) and Density of Hot Mix Asphalt (HMA) Maximum Specific Gravity (Gmm)


1. Ehab nabil abdelfattah fayed 2. Piyal kumara pathirana nape 3. Ndukaroy igwebueze 4. Walid taher abderahman diab 5. Alfie allauigan abenojar 6. Khaleel ahmed 7. M. H. Aslam 8. Mohamed razak mohamed rizwan 9. Julbasir s. Kamdon 10. Salifou ndima'ah sufah 11. Peter olurotimi omoshuli 12. Abdquadri opeyemi bashorun 13. Edwin chikeh nwachukwu 14. Mohamed arafat mohideen pichchai 15. Julbasir s. Kamdon 16. Yasir arafat 17. Bed bahadur thapahi 18. Mohamed umar ansari 19. Bhola nath jaisi poudel 20. Birendra mahato nuniya




Section Location /


56. 6.46 Asphalt AASHTO T283 and ASTM D4867/D4867M

Resistance of compacted hot mix asphalt (HMA) to moisture - induced damage.



57. 6.36 Asphalt AASHTO T312 and ASTM D6925

Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor



58. Asphalt AASHTO T324 Humblot hamburg wheel tracker test






Section Location /


59. 6.39 Asphalt AASHTO TP79 Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA)



60. 2.15 Asphalt ASTM D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures



61. 6.22 Asphalt ASTM D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures



62. 6.26 Asphalt ASTM D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples






Section Location /


63. 6.27 Asphalt ASTM D2041/D2041M

Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures






Section Location /


64. 6.32 Asphalt ASTM D2172 Quantitative Extraction of bitumen from bituminous paving mixtures


1. Ehab nabil abdelfattah fayed 2. Piyal kumara pathirana nape 3. Ndukaroy igwebueze 4. Walid taher abderahman diab 5. Alfie allauigan abenojar 6. Khaleel ahmed 7. M. H. Aslam 8. Mohamed razak mohamed rizwan 9. Julbasir s. Kamdon 10. Salifou ndima'ah sufah 11. Peter olurotimi omoshuli 12. Abdquadri opeyemi bashorun 13. Edwin chikeh nwachukwu 14. Mohamed arafat mohideen pichchai 15. Julbasir s. Kamdon 16. Yasir arafat 17. Bed bahadur thapa 18. Mohamed umar ansari 19. Bhola nath jaisi poudel 20. Birendra mahato nuniya




Section Location /



Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures



66. Asphalt ASTM D3203/D3203M

Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures


1. Ehab nabil abdelfattah fayed 2. Ndukaroy igwebueze 3.Walid taher abderahman diab 4. Alfie allauigan abenojar 5. M. H. Aslam 6. Mohamed razak mohamed rizwan 7. Abdquadri opeyemi bashorun 8. Yasir arafat 9. Bed bahadur thapa 10. Mohamed umar ansari 11. Birendra mahato nuniya 12. Adel bin qayoom 13. Rajanar(rj) 14. Carman 15. Alim 16. Madzwin




Section Location /



Thickness of Asphalt Specimen




Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing



69. 6.31 Asphalt ASTM D5581 Resistance to Plastic Flow Using Marshall Apparatus (6 in. Specimen)






Section Location /


70. 6.33 Asphalt ASTM D6307 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method



71. Asphalt ASTM D6752/D6752M

Bulk Specific gravity of Compacted Bituminous samples


1. Ehab Nabil 2. Nduka Roy 3. Piyal Kumara 4. Alfie Abenjar Ansar Suco Kelum Mubeen Manazer 5. Mujahed Ansari Yannick Rizwan Nasar


Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method






Section Location /


73. 6.24 Asphalt ASTM D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus



74. 6.30 Asphalt ASTM D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures






Section Location /


75. 6.40 Asphalt ASTM D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures



76. Asphalt ASTM D7227/ D7227 Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus.


1. Ehab Nabil Abdelfattah Fayed 2. Nduka Roy Igwebueze 3. Piyal Kumara 4. Alfie Allauigan Abenojar 5. Ansar Suco 6. Kelum 7. Mubeen 8. Manazer 9. Mujahed Umar Ansari 10. Yannick 11. Rizwan Nasar




Section Location /


77. Asphalt ASTM E965 Measuring Pavement Macrotexture Depth Using a Volumetric Technique



78. 6.50 Asphalt BS EN 12697-1 Annex B.1.5

Bituminous mixtures — Test methods for hot mix asphalt (Soluble Binder Content)



79. 6.52 Asphalt BS EN 12697-5 Proc. B

Bituminous mixtures -Test methods for hot mix asphalt Determination of Maximum Density (Hydrostatic procedure)



80. 6.53 Asphalt BS EN 12697-6 Bituminous mixtures — Test methods for hot mix asphalt (Determination of Bulk Density of Bituminous Material)






Section Location /


81. 6.54 Asphalt BS EN 12697-8 Bituminous mixtures — Test methods for hot mix asphalt (Determination of Voids Characteristics of Bituminous Specimens)



82. 6.55 Asphalt BS EN 12697-9 Determination of the reference density



83. 6.56 Asphalt BS EN 12697-13 Temperature measurement Street 41/Asphalt section


84. 6.64 Asphalt BS EN 12697-23 Determination of the indirect tensile strength of bituminous specimens






Section Location /


85. 6.47 Asphalt BS EN 12697-27 Sampling of Asphalt Measurement



86. 6.48 Asphalt BS EN 12697-28 Preparation of Samples for Determining Binder Content, Water Content & Grading



87. 6.57 Asphalt BS EN 12697-29 Bituminous mixtures — Test methods for hot mix asphalt (Determination of dimensions of Bituminous Specimens)



88. 6.49 Asphalt BS EN 12697-30 Specimen Preparation by Impact Compactor






Section Location /


89. 6.58 Asphalt BS EN 12697-34 Marshall Test Street 41/Asphalt section


90. 6.59 Asphalt BS EN 12697-35 Bituminous mixtures -Test methods for hot mix asphalt (Laboratory Mixing)



91. 6.60 Asphalt BS EN 12697-36 Bituminous mixtures - Test methods for hot mix asphalt (Determination of the thickness of a bituminous pavement (Specimen))



92. 6.61 Asphalt BS EN 12697-39 Binder Content by Ignition Street 41/Asphalt section





Section Location /


93. 6.99 Asphalt QCS 2014 CL 06-05 Paragraph 16

Retained Stability (Per ASTM D6927 or ASTM D5581)


1. Ehab Nabil Abdelfattah Fayed 2. Nduka Roy 3. Sembo Tamong Kasimee 4. Khaleel Ahmed 5. Aslam 6. Yum Kumar 7. Rizwan 8. Mohammed Anees 9. Mohammed Assam 10. Alfie A Abenojar. 11. Yannick 12. Tohidul Islam 13. anjula 14. Hisham 15. Deependra 16. Mourad Zrelli 17. Ashok Baniya 18. Madzwin Iddo 19. Amir Hassan 20. Manazir 21. Subana 22. Ashraf 23. Kamal 24. Gaffar 25. Ansar 26. Azeem 27. Rizwan 28. Kareem

94. Asphalt SP-2 & AASHTO R35 Standard Practice for Superpave Volumetric Design for Asphalt Mixtures (Superpave Mix Design)






Section Location /


95. Building Acoustics

BS EN ISO 140-3 Laboratory measurement of airborne sound insulation of building elements

Street 41/Main Lab

1- Mohamed Jamal Abd El-Rady 2-Ahmed Mahmoud Rashid 3- Sujan Shrestha 4- Arif Husain

96. Building Acoustics

BS EN ISO 140-4 Field measurements of airborne sound insulation between rooms

Street 41/Main Lab

1- Mohamed Jamal Abd El-Rady 2-Ahmed Mahmoud Rashid 3- Sujan Shrestha 4- Arif Husain

97. Cementitious Materials

ASTM C109/C109M and ASTM C311/ C311M CL 29

Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

Street 41/Cement Section

Exequiel Santos, Glenn Oliveroos, Michael Agora Abdel Hakam


ASTM C151/C151M Autoclave Expansion of Hydraulic Cement


1. Michael cahigan agora 2. Glenn oliveros, 3. Jerry Jr Pernito Beter

99. 5.2 Cementitious Materials

ASTM C183/C183M Sampling and the Amount of Testing of Hydraulic Cement


1. Michael Agora, 2. Glenn oliveros, 3. Abdel hakam Endih


ASTM C185 Standard Test Method for Air Content of Hydraulic Cement Mortar


1. Michael cahigan agora 2. Glenn oliveros


ASTM C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste


1. Michael cahigan agora 2. Glenn oliveros, 3. Jerry Jr Pernito Beter


ASTM C188 and ASTM C311/C311M CL 19

Standard Test Method for Density of Hydraulic Cement


1. Exequiel Santos 2. Glenn Oliveroos 3. Michael Agora 4. Abdel Hakam


ASTM C191 Time of Setting of Hydraulic Cement by Vicat Needle


1. Glenn Oliveroos, 2. Michael Agora 3. Abdel Hakam


ASTM C204 Method A

Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus






Section Location /



ASTM C311/C311M CL 11-13

Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete (Moisture Content)


1. Jerry Jr Pernito Beter 2. Exequiel Victorino Santos 3. Michael Cahigan Agora 4. Glenn Oliveros 5. Abolaji Ishaq Okunola 6. Mohammed Sanaf Bavikkara Moideenkunhi 7. Hatta Sappal Amud


ASTM C349 Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)


1. Exequiel Santos, 2. Glenn Oliveroos, 3. Michael Agora


ASTM C430 and ASTM C311/C311M CL 20

Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve


1. Michael Cahigan Agora 2. Glenn Oliveros


ASTM C989-Appendix XI

Compressive Strength for ground Granulated Blast Furnace slag




ASTM C1012/C1012M and ASTM C311/C311M CL 34

Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution




ASTM C1240-15 Pozzolanic Activity Test Street 41/ Cement Section

Glenn oliveros Exiquiel santos Michael agora Robert villas


ASTM C1437 Standard Test Method for Flow of Hydraulic Cement Mortar




ASTM D5759 Characterization of fly ash for potential uses




BS 1924-2 CL 2.1.5 Stabilized materials for civil engineering purposes Part 2: Methods of test for cement-stabilized and lime- stabilized materials 'Method using vibratory compaction'






Section Location /



BS 1924-2 CL 4.2 & 4.3

Stabilized materials for civil engineering purposes Part 2: Methods of test for cement-stabilized and lime- stabilized materials 'Determination of the compressive strength of cubic specimens'




BS EN 196-1 Methods of testing cement (Determination of Strength)


1. Exequiel Santos, 2. Glenn Oliveroos, 3. Michael Agora


BS EN 196-2-CL 13.2&3

Impure Silica Content Street 41/ Chemical Section



BS EN 196-2 CL 13.9 Total Silica Content Street 41/ Chemical Section



BS EN 196-3:2005 + A1 CL 6 and Annex A

Methods of testing cement, Determination of setting times and soundness (Determination of Setting Time of cement)




BS EN 196-3 CL 7 Determination of Soundness of cement


1. Exequiel Santos, 2. Glenn Oliveroos, 3. Michael Agora 4. Abdel Hakam


BS EN 196-6 Determination of Fineness of cement




BS EN 196-7 Taking and Preparing Samples of Cement



122. 2.9 Chemistry (Soil, Aggregate, Concrete, Cement)

ASTM C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

Street 41/ Chemical section

1. Saleem Kalathil 2. Khaled Imam Abdellah Moumene

123. Chemistry (Soil, Aggregate, Concrete, Cement)

ASTM C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)


Khalid Imam Saleem Kalathil




Section Location /



ASTM C494/494 CL 18.2-16

Standard Specification for Chemical Admixtures for Concrete (Oven Dry Residue of Admixture)




ASTM C494/494 CL 18.4-16

Standard Specification for Chemical Admixtures for Concrete (Specific gravity of Admixture)




ASTM C1152 Acid Soluble Chloride in Concrete


1. Ahmed 2. Van Soriano, 3. Thanveer Cresent House Daylo Abante


ASTM C1218 Water Soluble Chloride in Concrete


1. Ahmed 2. Van Soriano 3. Thanveer Cresent House


BS 1377-3 CL 3 Determination of the organic matter content


1. Saleem Kalathil 2. Abdellah Moumene


BS 1377-3 CL 5.2 Determination of sulphate content of soil- Acid Soluble Extract


1. Khaled Imam Abdellah Moumene 2. Saleem Kalathil,


BS 1377-3 CL 5.3 & 5.5

Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of sulphate content of soil- Water Soluble Extract)


1. Saleem Kalathil 2. Meethale Chakkoli Muneer 3. Abdellah Moumene


BS 1377-3 CL 6.3 Methods of test for Soils for civil engineering purposes — Chemical and electro-chemical tests (Determination of the carbonate content)

Street 41/ Chemical section 1. Saleem Kalathil

2. Meethale Chakkoli Muneer 3. Abdellah Moumene




Section Location /



BS 1377-3 CL 7.2 Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of water- soluble chloride content)




BS 1377-3 CL 7.3 Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of acid- soluble chloride content)




BS 1377-3 CL 9 Methods of test for Soils for civil engineering purposes — Chemical and electro- chemical tests (Determination of the pH value)




BS 1881-124 CL 10.2

Determination of chloride content




BS 1881-124 CL 10.3

Determination of sulphate content




BS EN 196-2 Chemical analysis for cement Street 41/ Chemical section

1. Tanveer Sarwar Saleem Khalid Imam


BS EN 196-2 CL 4.4.1

Determination of loss on ignition


1. Mohamed Sarwar Rajput 2. Saleem Kalathil


BS EN 196-2 CL 4.4.2

Method of testing cement Chemical analysis of cement (Determination of sulfate)


1. Mohamed Sarwar Rajput 2. Thanveer Cresent House




Section Location /



BS EN 196-2 CL 4.4.3

Method of testing cement Chemical analysis of cement (Determination of residue insoluble in hydrochloric acid and sodium carbonate)




BS EN 196-2 CL 4.5.5

Decomposition with hydrochloric acid and ammonium chloride and precipitation of silica (alternative method)




BS EN 196-2 CL 4.5.6

Determination of pure silica Street 41/ Chemical section



BS EN 196-2 CL 4.5.10

Method of testing cement Chemical analysis of cement (Determination of Ferric Oxide Content)




BS EN 196-2 CL 4.5.11

Method of testing cement Chemical analysis of cement (Determination of Aluminum Oxide Content)




BS EN 196-2 CL 4.5.14

Determination of calcium oxide by EDTA (alternative method)




BS EN 196-2 CL 4.5.15

Determination of magnesium oxide by EDTA (alternative method)




BS EN 196-2 CL 4.5.16

Method of testing cement Chemical analysis of cement (Chloride Content)


1. Mohamed Sarwar Rajput 2. Saleem Kalathil


BS EN 196-2 CL 4.5.19

Method of testing cement. Chemical analysis of cement (Alkalies Content)


1. Saleem Kalathil 2. Abdellah Moumene Mohamed




Section Location /



BS EN 933-9+A1 Tests for geometrical properties of aggregates- Assessment of fines- Methylene blue test




BS EN 1744-1 CL 12+A1

Determination of acid soluble sulphates


1. Thanveer Cresent House Khalid Imam 2. Saleem Kalathil, 3. Abdellah Moumene


BS EN 1744-5 Tests for chemical properties of aggregates (Determination of acid soluble chloride content)



152. 3.1 Concrete ASTM C31/C31M Making and Curing of Concrete Tests Specimen

Street 41/Concrete Section

1-Kapur Mohan Tamang

153. 3.5 Concrete ASTM C39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens


1. Govinda Giri 2. Salman Ansari 3. Kimhar Juhaini

154. 3.8 Concrete ASTM C42 Obtaining and Testing of Drilled Cores and Sawed Beams


1-Kapur Mohan Tamang

155. 3.14 Concrete ASTM C138/C138M Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete


1. Samy Tawfik Gad 2. Okoye Onyeka Etien 3. Victor, 4. Sudeesh Sudhakran

156. 3.4 Concrete ASTM C143/C143M Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate


1. Samy Tawfik Gad, 2. Okoye Onyeka Etien, 3. Kimhar Dugasan Juaini 4. Sudeesh Sudhakaran

157. 3.2 Concrete ASTM C172/C172M Standard Practice for Sampling Freshly Mixed Concrete (Sampling of Fresh Concrete)


1-Samy Tawfik 2-Okoye Onyeka Etien 3-Victor, 4-Sudeesh Sudhakran

158. Concrete ASTM C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory


1. Mirendra dhital 2. Abdul qader mohamed irfan, 3. Govinda giri 4. Salaman Ansari




Section Location /


159. 3.12 Concrete ASTM C231/C231M Standard Test Method for Air Content Test for Fresh Concrete by Pressure Method, (Type B)


1. Samy Tawfik Gad, 2. Okoye Onyeka Etien, 3. Victor, 4. Sudeesh Sudhakran

160. Concrete ASTM C232/C232M Standard Test Methods for Bleeding of Concrete


1. Samy Tawfik Gad 2. Sharabin Kelum 3. Nishantha Arangala Pathirage 4. Okoye Onyeka Etien 5. Randy Vidad 6. Saju Tharulli 7. Antony Aneesh Babu

161. 3.6 Concrete ASTM C617/C617M Capping of Concrete Cylindrical Specimen


1. Kapur Mohan Tamang 2. Safar Uddin Miya

162. 3.3 Concrete ASTM C1064/C1064M

Test for Temperature of Fresh Concrete


1. Samy Tawfik Gad Sharabin Kelum 2. Nishantha Arangala Pathirage 3. Okoye Onyeka Etien Randy Vidad 4. Saju Tharulli Antony Aneesh Babu

163. 3.11 Concrete ASTM C 1202 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration (Resistance to Chloride Ion Penetration (RCP))


1-Kapur Mohan Tamang 2-Safar Miya 3-Hik Bahadur Tamang 4-Rom Bahadur Ale


Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders


1-Mirendra dhital, 2-Abdul qader mohamed irfan, 3-Govinda giri


Sampling of Shotcrete Street 41/Concrete Section

1. Samy Tawfik Gad Sharabin Kelum 2. Nishantha Arangala Pathirage 3. Okoye Onyeka




Section Location /


166. Concrete ASTM C1604/C1604M-

Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete


1. Mirendra dhital 2. Abdul qader mohamed irfan, 3. Govinda giri 4. Kapoor Tamong


Slump Flow of Self- Consolidating Concrete


1. Samy Tawfik Gad 2. Okoye Onyeka Etien, 3. Victor, 4. Sudeesh Sudhakran


Standard Test Method for Passing Ability of Self- Consolidating Concrete by J-Ring




Density Determination of Pervious Concrete


1. Samy Tawfik Gad 2. Sharabin Kelum N 3. Ishantha Arangala Pathirage 4. Okoye Onyeka


Infiltration Test for In place Pervious Concrete


1. Samy Tawfik Gad 2. Sharabin Kelum N 3. Ishantha Arangala Pathirage 4. Okoye Onyeka

171. 3.30 Concrete BS 1881-122 Method of Determination of Water Absorption


1. Kapur Mohan Tamang

172. 3.31 Concrete BS 1881-208 Initial Surface Absorption (ISAT)



173. 3.21 Concrete BS EN 12350-1 Testing fresh concrete (Sampling of Fresh Concrete)






Section Location /


174. 3.23 Concrete BS EN 12350-2 Testing fresh concrete (Slump Test of Fresh Concrete)



175. Concrete BS EN 12350-3 Testing fresh concrete (Vebe test)



176. Concrete BS EN 12350-4 Testing fresh concrete (Degree of compatibility)



177. 3.24 Concrete BS EN 12350-5 Testing fresh concrete (Flow Table Test)



178. Concrete BS EN 12350-6 Testing fresh concrete (Testing fresh concrete Density)






Section Location /


179. Concrete BS EN 12350-7 Testing fresh concrete (Testing fresh concrete Air content. Pressure methods)



180. Concrete BS EN 12350-8 Slump Flow Test for self compacted Concrete



181. 3.35 Concrete EN 12350-9 V-Funnel Test for self Compaction Concrete



182. 3.36 Concrete BS EN 12350-10 L- Box Shap Test for Self Compaction Concrete



183. Concrete BS EN 12350-11 Sieve Segregation test for Self Compaction Concrete






Section Location /


184. 3.25 Concrete BS EN 12390-1 Shape and Dimensions of Specimen


1. Mirendra dhital, 2. Abdul qader mohamed irfan 3. Govinda giri 4. Salaman Ansari

185. 3.22 Concrete BS EN 12390-2 Making and Curing of Specimen for Strength Test


1. Mirendra dhital, 2. Samy Tawfik Gad

186. 3.26 Concrete BS EN 12390-3 Annex B

Compressive Strength of Test Specimens



187. Concrete BS EN 12390-5 Annex A

Testing hardened concrete (Flexural strength of test specimens)


1. Mirendra dhital 2. Abdul qader mohamed irfan 3. Govinda giri 4. Salaman Ansari

188. Concrete BS EN 12390-6 Testing hardened concrete (Tensile splitting strength of test specimens)


1. Mirendra dhital 2. Abdul qader mohamed irfan, 3. Govinda giri 4. Salaman Ansari

189. 3.27 Concrete BS EN 12390-7 Density of Hardened Concrete



190. 3.29 Concrete BS EN 12390-8 Water Penetration Test Street 41/Concrete Section


191. 3.28 Concrete EN 12504-1 (E) Obtaining and Testing of Drilled Cores



192. Concrete DIN 1048-5 Method of determination of Water Penetration






Section Location /


193. 3.32 Concrete NT Build 492 Chloride Migration Coefficient / Chloride Penetration Test



194. Concrete QCS2014 CL5-6 and ASTM C1064 / C1064M

Concrete Temperature Monitoring by using Thermocouples


1. Alexis Legaspi Lorica 2. Al Quin Teopaco Batu

195. Cosmetics AOAC Official Method 951.04

Chlorides in Deodorants Gravimetric Method

Street 41 / Chemical section

1. Saleem Kalathil 2. Meethale Chakkoth Muneer

196. Cosmetics AOAC Official Method 951.05

Sulfates in Deodorants Gravimetric Method


1. Saleem Kalathil 2. Meethale Chakkoth Muneer

197. Dimension Stone

ASTM C97/C97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

Street 41/ Durability Section

Kapur Mohan Tamang


ASTM C99/C99M Standard Test Method for Modulus of Rupture of Dimension Stone


1. Kapur Mohan Tamang 2. Arif Husain 3. Irshad Ansari


ASTM C1353/ C1353M

Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double- Head Abraser




ASTM C170/C170M Compressive Strength of Dimension Stone


Kapur Mohan Tamang


ASTM C880/C880M Standard Test Method for Flexural Strength of Dimension Stone



202. 13.21 Dimension Stone

ASTM D4060 & QCS 2014 CL 6 & CL 13.3.4

Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser


Kapur Mohan Tamang


BS EN 1926: Annex A

Natural stone test methods (Determining the compressive strength of stones)






Section Location /



EN 1341 CL 4.5 / BS EN 14157 Method A

Natural stones — Determination of (Abrasion Resistance)



205. Environmental Chemistry - Water - Wastewater and Soil

APHA/AWWA 23rd Ed., 2120C

Spectrophotometric— Single-Wavelength Method (PROPOSED) (Color)


1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Daylo Abante

206. 9.3 Environmental Chemistry - Water - Wastewater and Soil

APHA/AWWA 23rd Ed., 2130 B

Nephelometric Method (Turbidity)


1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Ahmed Mohammed Bashir Saleem 4. Daylo Abante Van Soriano



Alkalinity by Titration Method Street 41/ Chemical section

1. Al Cruz Atilano 2. Saleem Kalathil Daylo Abante



Titration Method (Bicarbonate)


1. Al Cruz Atilano, 2. Ariel Audine Manongsong Saleem 3. Daylo Abante



Titration Method (Carbonate) Street 41/ Chemical section




Titration Method (Phenolphthalein Alkalinity)




APHA/AWWA 23rd Ed., 2340 C

Hardness by EDTA Titrimetric Method


1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3. Ahmed Saleem 4. Daylo Abante




Section Location /




Conductivity by Laboratory Method


1. Al Cruz Atilano, 2. Ariel Audine Manongsong, 3. Saleem 4. Daylo Abante 5. Ria Luna


APHA/AWWA 23rd Ed., 2520B

Electrical Conductivity Method (salinity)




APHA/AWWA 23rd Ed., 2540-B

Total Solids Dried at 103– 105°C (Total Solids)




APHA/AWWA 23rd Ed., 2540 C

Total Dissolved Solids Dried at 180 oC (TDS)


1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante 5. Ria Luna


APHA/AWWA 23rd Ed., 2540- C&E

Total Volatile Dissolved Solids (TVDS)




APHA/AWWA 23rd Ed., 2540-D

Total Suspended Solids Dried at 103–105°C (Total Suspended Solids (TSS))


1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante 5. Van Soriano 6. Ria Luna


APHA/AWWA 23rd Ed., 2540-D&E

Total Volatile Suspended Solids (TVSS)






Section Location /


219. 9.90 Environmental Chemistry – Water - Wastewater and Soil

APHA/AWWA 22nd Ed. 2540-F

Settleable Solids Street 41/ Chemical section

1. Al Cruz 2. Saleem K. Kalathil


APHA/AWWA, SM, 22nd Ed., 2540-G

Sludge Weight Street 41/ Chemical Section

1. Al Cruz Atilano 2. Daylo Abante


APHA/AWWA, SM, 22nd Ed., 2710-D

Sludge Volume Street 41/ Chemical Section



APHA/AWWA, SM, 22nd Ed., 2710-D

Sludge Volume Index Street 41/ Chemical Section



APHA/AWWA, 23rd Ed. 3120-B

Antimony Street 41/ Chemical section

1. Ariel Audine Manongsong, 2. Ria Luna


APHA/AWWA, 23rd Ed., 3120-B

Arsenic Street 41/ Chemical section



APHA/AWWA, 23rd Ed., 3120-B

Beryllium Street 41/ Chemical section



APHA/AWWA 23rd Ed., 3120- B

Calcium Street 41/ Chemical section

1. Ariel Audine Manongsong 2. Ria Luna




Section Location /




Chronium(VI) Street 41/ Chemical section

1. Al Cruz 2. Saleem Kalathil



Magnesium Street 41/ Chemical section




Mercury Street 41/ Chemical section



APHA/AWWA 23rd Ed. 3120-B

Molybdenum Street 41/ Chemical section




Phosphorous Street 41/ Chemical section




Potassium Street 41/ Chemical section




Selenium Street 41/ Chemical section




Silicon Street 41/ Chemical section





Section Location /




Sodium Street 41/ Chemical section




Sulfur Street 41/ Chemical section




Titanium Street 41/ Chemical section

1. Ariel Audine 2. Manongsong, 3. Ria Luna


APHA/AWWA 23rd Ed. 3120-B

Vanadium Street 41/ Chemical section

1. Ariel Audine 2. Manongsong, 3. Ria Luna

239. 9.46 9.47 9.49 9.50 9.51 9.52 9.53 9.55 9.57 9.59 9.61 9.62 9.65 9.68 9.69

Environmental Chemistry - Water - Wastewater and Soil

AAPHA/AWWA 23rd Ed., 3120-B Heavy Metal Analysis by ICP, 3110-B Heavy Metal

ICP Heavy Metal Concentrations: Aluminum (Al), Barium (Ba), Bismuth (Bi), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Gallium (Ga), Indium (I), Iron (Fe), Lead (Pb), Lithium (Li), Magnesium (Mg), Manganese (Mn), Nickel (Ni), Potassium, Siver (Ag) Thallium (Ti) Zinc (Zn)




APHA/AWWA 23rd Ed., 3500-Ca-B

EDTA Titrimetric Method (Calcium)


1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante




Section Location /



APHA/AWWA 22nd Ed. 3500-Cr B,

Chromium(VI) Street 41/ Chemical section



APHA/AWWA 23rd Ed., 3500-Mg-B

Magnesium Concentration by Calculation


1. Ariel Audine Manongsong, 2. Al Cruz Atilano, 3.Ahmed Saleem 4. Daylo Abante

243. 9.26 9.27 9.28 9.29 9.30 9.32 9.73

Environmental Chemistry – Water - Wastewater and Soil

APHA/AWWA 23rd Ed., 4110-B & P

Determination of SulphateSO4 , Bromide Br, Nitrate NO3, Nitrire NO2, Floride F, Cloride, Phosphate


1. Alcroz Hossam Ariel 2. Daylo Abante


APHA/AWWA 23rd Ed., 4110-B & D,

Bromate Street 41/ Chemical section



APHA/AWWA 23rd Ed., 4110-B & D

Chlorate, Chlorite Street 41/ Chemical section

1. Al Cruz 2. Moumene Abdellah


APHA/AWWA 23rd Ed., 4500-B & C

Phosphorous (Total) Street 41/ Chemical section

1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Saleem Kalathil Daylo Abante


APHA/AWWA 23rd Ed., 4500-Cl B

(Chloride by Argentometric Method)


1. Ariel Audine Manongsong 2. Al Cruz Atilano




Section Location /



APHA/AWWA 23rd Ed., 4500-Cl G

DPD Colorimetric Method (Total Chlorine)




APHA/AWWA 23rd Ed., 4500-Cl G

DPD Colorimetric Method (Residual Chlorine)




APHA/AWWA 23rd Ed., 4500 H+ B

pH VALUE Street 41/ Chemical section



APHA/AWWA 23rd Ed., 4500 NH3 B & C

Ammonia Nitrogen Street 41/ Chemical section



APHA/AWWA 23rd Ed., 4500-NO2B

Colorimetric Method (Nitrite Nitrogen)


1. Ariel Audine Manongsong 2. Al Cruz Atilano, 3. Ahmed Saleem Daylo Abante


APHA/AWWA 23rd Ed., 4500-NO3E

Cadmium Reduction Method (Nitrate Nitrogen)




APHA/AWWA 23rd Ed., 4500 Norg C

Semi-Micro-Kjeldahl Method (Total Kjeldahl Nitrogen)






Section Location /



APHA/AWWA 23rd Ed., 4500 Norg C

Semi-Micro-Kjeldahl Method (Total Organic Nitrogen)




APHA/AWWA 22nd Ed. 4500-O G

Dissolved Oxygen Street 41/ Chemical Section



APHA/AWWA 23rd Ed., 4500 P B, C

Acid Colorimetric Method (Phosphate)




APHA/AWWA 23rd Ed., 4500- S2 F

Iodometric Method (Sulphide)


1. Al Cruz Atilano 2. Ahmed Mohammed Bashir Ahmed, 3. Ariel Audine Manongsong Saleem 4. Daylo Abante


APHA/AWWA 23rd Ed., 4500- SiIO2-C, 22P and P

Total Silicates Street 41/ Chemical section

1. Ieza AL cruz 2. Daylo Abante


APHA/AWWA 23rd Ed., 4500- SO4 E

Turbidimetric Method (Sulphate)




APHA/AWWA 23rd Ed., 5210B & 4500-OG

Biochemical Oxygen Demand(BOD)






Section Location /



APHA/AWWA 23rd Ed., 5220 D

Closed Reflux, Colorimetric Method (Chemical Oxygen Demand(COD))




APHA/AWWA 23rd Ed., 5310-B or C, 22P and P

Total Organic Carbon (TOC) Street 41/ Chemical section

1. Al Cruz Saleem 2. Ahmed Mohamed Bashir Ariel



Oil & Grease Street 41/ Chemical section

1. Al Cruz Atilano 2. Ariel Audine Manongsong 3. Daylo Abante


APHA/AWWA 23rd Ed., 5530 B&C, P

Phenol Concentrations Street 41/ Chemical section

1. Abante Al Cruz


APHA/AWWA 23rd Ed., 6200 Volatile Organic Compounds

Organic Hydrocarbon Street 41/ Chemical section

1. Ahmed Mohammed Bashir Ahmed 2. Ariel Audine Manongsong


BS 1377-3 CL 5.4 Determination of the sulphate content of ground water




BS 1377-3 CL 8 Determination of total dissolved solids




BS 1377-3 CL 9 Determination of the pH value






Section Location /



BS EN ISO 10523 Water quality (Determination of pH)




ISO 4316 EI Determination of pH of aqueous solutions - Potentiometric method




US EPA 6010C/3005A

Aluminum (Al), Barium (Ba), Bismuth (Bi), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Gallium (Ga), Indium (I), Iron (Fe), Lead (Pb), Lithium (Li), Magnesium (Mg), Manganese (Mn), Nickel (Ni), Potassium (K), Silver (Ag), Sodium (Na),S


1. Ariel Audine Manongsong 2. Ahmed Mohammed Bashir


US EPA 6010C/3050B

Aluminum (Al), Barium (Ba), Bismuth (Bi), Boron (B), Cadmium (Cd), Calcium (Ca), Chromium (Cr), Cobalt (Co), Copper (Cu), Gallium (Ga), Indium (I), Iron (Fe), Lead (Pb), Lithium (Li), Magnesium (Mg), Manganese (Mn), Nickel (Ni), Potassium (K), Silver (Ag), Sodium (Na),S

Chemistry Lab 1. Ahmed 2. Ariel Audine Manongsong


US EPA 8015D/1664B/9071B

TPH ((GRO (Gasoline rang organic),DRO (Diesel rang organic),Heavy fraction))


1. Ahmed Mohammed Bashir Ahmed, 2. Ariel Audine Manongsong




Section Location /



US EPA 8260C/5030/5035

VOC (volatile organic compound)




US EPA 8270D SVOC (Simi volatile organic compound)



277. Environmental Monitoring

ISO 1996-2 Noise In-Situ 1. Ahmed Mohamed Bashir 2. Ariel Audine Manongsong


SOP-For AIR Quality Ambient Air quality Monitoring

In-Situ 1. Ahmed Mohamed Bashir 2. Ariel Audine Manongsong


Stack Emission USEPA Method 1,2,3,4 & 5

Method 1— Sample and Velocity Traverses for Stationary Sources Method 2—Determination of Stack Gas Velocity and Volumetric Flow Rate (Type S Pitot Tube) Method 3 - Gas Analysis for the Determination of Dry Molecular Weight METHOD 4— DETERMINATION OF MOISTURE CONTENT IN STACK GASES Method 5 - Particulate Matter (PM)

Site test 1. Ariel Manomgong 2. Robert 3. Van


Stack Emission USEPA Method 25A

Determination of Total Gaseous Organic Concentration Using a Flame Ionization Analyzer

Site test 1. Ariel Manomgong 2. Robert 3. Van


Testo 350 SOP Stack emission In-Situ 1. Ahmed Mohamed Bashir 2. Ariel Audine Manongsong

282. Food BS EN 1186-1:2002 Guide to the selection and conditions and test methods of Overall migration


1. Daylo Abante 2.Anuja




Section Location /


283. Food BS EN 11863 Determination of the overall Migration into aqueous food simulants by total Immersion



284. Food BS EN 11869:2002 Determination of the overall Migration into aqueous food simulants – By Article Filling



285. Food CCFRA 3.1.2 and CCFRA3.1.5:2007

Detection of Salmonella Street 41 / Chemical section


286. Food Ioden value Iodine absorption number of oil and fats (Wijs Method)


1. Al Cruz 2. Moumene Abdellah

287. 8.7 Geotechnical Tests

ASTM D2435/D2435M

Determination of One Dimensional Consolidation Properties of Soils

Street 41/ Soil Lab

1. Mohammed Gamal Abdulradi Alsayed 2. Bles Nforneh Molah 3. Ahmed Mahmoud Rashid Ahmed


ASTM D4543 Preparing Rock Core Specimens to Dimensional and Shape Tolerances

Street 41/ Soil Lab

1. Mohammed Gamal Abdulradi Alsayed 2. Mohammed Abdulhamid Abdulalim Ali 3. Rom Bahadur Ale Ahmed Mahmoud Rashid Ahmed 4. Yassine Hosni


ASTM D4546 One Dimensional Swell of Cohesive Soils

Street 41/ Soil Lab

1. Mohammed Gamal Abdulradi Alsayed 2. Ahmed Mahmoud Rashid Ahmed 3. Ram Bahadur Ale


ASTM D5607 Direct Shear on Rock Street 41/ Soil Lab

1- Mohamed Jamal Abd El rady 2- Ahmed Mahmoud Rashed 3-Arif husain 4-Sunday 5- Bless Mola




Section Location /



ASTM D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

Street 41/ Soil Lab

1. Mohammed Gamal Abdulradi Alsayed 2. Muhamad Aslam 3. Irshad Ansari 4. Arif Hussain 5. Philip 6. Bles Nforneh Molah 7. Ahmed Mahmoud Rashid Ahmed


ASTM D6951/D6951M

Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

In-Situ 1. Mohammed Gamal Abdulradi Alsayed 2. Mohammed Abdulhamid Abdulalim Ali 3. Kapur Mohan Tamang


ASTM D7012 Standard Test Method for Unconfined Compressive Strength of Intact Rock Core Specimens

Street 41/ Soil Lab

1. Mohammed Gamal Abdulradi Alsayed 2. Yassine Hosni 3. Mohammed Abdulhamid Abdulalim Ali 4. Bles Nforneh Molah 5. Sunday Ifeanyichukwu Izukwe 6. Ifeanyichukwu Izukwe 7. Ahmed Mahmoud Rashid Ahmed


ASTM G57 Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method (Electrical Resistivity Test)

In-Situ 1. Mohammed Gamal Abdulradi Alsayed 2. Mohammed Abdulhamid Abdulalim Ali 3. Kapur Mohan Tamang

295. Geotechnical Tests

BRE Digest 365 Soakaway design (Dissiption) Work Shop 1. Joemar Paala 2. Faisal Vakialla Hair Al Noor




Section Location /



BS 1377-5 CL 3 Methods of test for Soils for civil engineering purposes — Compressibility, permeability and durability tests (Determination of One Dimensional Consolidation Properties of Soils)

Street 41/ Soil Lab



BS 1377-5 CL 5 Constant Head Permeability Test

Street 41/ Soil Lab

1. Ahmed Rasheed Mohammed Jamal 2. Mohmmed Abdelhameed Yasin Hosny


BS 1377-7-CL 3 Vane Shear Test Street 41/ Soil Lab

1- Mohamed Jamal Abd El rady 2- Ahmed Mahmoud Rashed 3-Arif husain 4-Sunday 5- Bless Mola


BS 1377-7 CL 4 Methods of test for Soils for civil engineering purposes — Shear strength tests (total stress) (Determination of shear strength by direct shear (small shearbox apparatus))

Street 41/ Soil Lab



BS 1377-7 CL 5 Methods of test for soils for civil engineering purposes. Shear strength tests (total stress) (Direct Shear on Soil (Large Box))

Street 41/ Soil Section

1. Mohammed gamal abdulradi alsayed 2. Mohammed abdulhamid abdulalim ali 3. Rom bahadur ale Ahmed mahmoud rashid ahmed 4. Yassine hosni




Section Location /



BS 1377-9 CL 3.3 (EN ISO 22476- 3+A1 (E))

Geotechnical investigation and testing — Field testing — Standard penetration test (Determination of the penetration resistance using the split-barrel sampler (the standard penetration test SPT))

In-Situ


BS 1377-9 CL 4.1 Determination of the vertical deformation and strength characteristics of soil by the plate loading test

In-Situ 1. Sunday 2. Bles Molah 3. Mohammed Jamal 4. Ahmed Rasheed 5. Mohamad Aslam Nagoor 6. Abayomi Philip 7. Irshad Ansari 8. Arif Hussain 9. Victor Chidiadi 10. Massoud Kamel 11. Maskkor Mohamed anifa


BS 1377-9 CL 4.3 Methods of test for Soils for civil engineering purposes — In-situ tests (Determination of the in- situ California Bearing Ratio (CBR))

Street 41/ Soil Lab



BS 5930 CL 22 Code of practice for site investigations (Soil Sampling)

In-Situ


BS 5930 CL 23 Code of practice for site investigations (Ground Water Sampling)

Work Shop 1. Faisal Vakialla Hair Al Noor


BS 5930 CL 23, 27, 47

Code of practice for site investigations (Ground Water Level Measurement)

Work Shop 1. Faisal Vakialla Hair Al Noor




Section Location /



BS 5930 CL 25 Code of practice for site investigations (Falling Head Permeability Test)

Work Shop


BS 5930 CL 25 Code of practice for site investigations (Packer Test)

Work Shop 1. Joemar Paala


BS 5930 CL tion 6 Description of Soil & Rock Street 41/ Soil Lab

1. Joemar Paala 2. Faisal Vakialla Hair Al Noor

310. Geotechnical Tests

CIRIA-Mair and Wood

Pressuremetere testing methods and interpretation (Pressuremeter HPD)

Work Shop 1. Joemar Paala 2. Faisal Vakialla Hair Al Noor

311. 11.4 Geotextile ASTM D4533/D4533M

Trapezoid Tearing Strength of Geotextiles

Geotextile & Membrane, Lab 29, Street 41

1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias

312. 11.12 Geotextile ASTM D5199-12 & BS EN 946

Thickness Under Pressure 2 Kpa



313. 11.6 Geotextile BS EN ISO 10319 Geosynthetics — Wide width tensile test



314. 11.9 Geotextile BS EN ISO 11058 Determination of water permeability characteristics normal to the plane, without load



315. 11.5 Geotextile BSEN ISO 12236 CBR Puncture Resistance Geotextile & Membrane, Lab 29, Street 41


316. 11.8 Geotextile BS EN ISO 13433 Dynamic perforation test (cone drop test)



317. 11.16 Geotextile & Waterproofing

ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers— Tension (Test Method A)

Street 41/ Membrane / Geotextile Section





Section Location /



ASTM D714 Standard Test Method for Evaluating Degree of Blistering of Paints (After Sulphuric Acid Immersion Test for Internal Lining - per ASTM D543)

Street 41/ Membrane / Geotextile and Chemistry Section



ASTM D751 Standard Test Methods for Coated Fabrics - Bursting Strength - Cl. 18




ASTM D1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications - Adhesion Strength to Steel and Backing (Cl. 46 - 53)




ASTM D3787 Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of- Traverse (CRT) Ball Burst Test




ASTM D5034, G-E and MG-E

Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab and Modified Grab Test)




ASTM D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)




BS EN ISO 5084 Determination Of Thickness Of Textiles


1 - Mohamed Bahnaasy 2 - David Onishile


BS EN 12127 Textiles. Fabrics. Determination of mass per unit area using small samples. (Determination Of Mass Per Unit Area (Weight))

Street 41 1. Mohamed Bahnaasy 2. David Onishile 3. Jim Bajarias




Section Location /



BS EN ISO 12956 Geotextiles and geotextile- related products. Determination of the characteristic opening size. (Pore Size)



327. HDPE Pipe BS EN ISO 527-1 CL 10.1

Plastics — Determination of tensile properties Part 1: General principles 10.1 Stress

Street 41/Main Lab

1. Mohamed Abdelhameed 2. Jerry Beter 3. Glenn Oliver 4. Romel

328. HDPE Pipe EN ISO 580 Referred from BS EN 12666-1

Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) pipes — Test methods for the resistance to dichloromethane at a specified temperature (DCMT)

Street 41/Main Lab


329. HDPE Pipe EN ISO 3126 CL 5.2, 5.3.2, 5.3.3, 5.3.4, 5.4

Plastics piping systems — Plastics components — Determination of dimensions, 5.2 Wall Thickness, 5.3.2 Measurement of maximum and minimum diameter, 5.3.3 Mean Outside Diameter, 5.3.4 Mean Inside Diameter, 5.4 Out-of-Roundness

Street 41/Main Lab


330. HDPE Pipe BS 6920-2.2.1+A2 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.2: Odour and flavour of water — Subsection 2.2.1: General method of test

Street 41/Main Lab

1. Daylo Abante 2. Anuja




Section Location /


331. HDPE Pipe BS 6920-2.3+A2 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Ð Part 2: Methods of testÐ Section 2.4: Growth of aquatic microorganisms test

Street 41/Main Lab


332. HDPE Pipe BS 6920-2.6+A2 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.6: The extraction of metals

Street 41/Main Lab


333. HDPE Pipe EN 12099 Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content

Street 41/Main Lab


334. HDPE Pipe BS EN 12201- 2:2011+A1:2013, CL 5.1, 5.2, 6.1, 6.2, 6.3

Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) Part 2: Pipes, 5.1 Appearance, 5.2 Colour, 6.1 Measurements, 6.2 Mean outside diameter, out-of-roundness (ovality) and tolerances, 6.3 Wall thicknesses and their tolerances

Street 41/Main Lab


335. HDPE Pipe EN 12201-2 CL 11 Plastics piping systems for water supply, and for drainage and sewerage under pressure — Polyethylene (PE) Part 2: Pipes, 11. Marking

Street 41/Main Lab





Section Location /


336. HDPE Pipe EN 12666-1 CL 5.2, 6.1, 6.2.1, 6.2.3

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) — Part 1: Specifications for pipes, fittings and the system, 5.2 Colour, 6 Geometrical characteristics 6.1General, 6.2.1 Outside diameter, 6.2.3 Wall thickness

Street 41/Main Lab


337. HDPE Pipe EN ISO 13479 Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipe

Street 41/Main Lab


338. HDPE Pipe EN ISO 15512 CL 3 Plastics — Determination of water content 3. Method A — Extraction with anhydrous methanol

Street 41/Main Lab

1. Saleem Kalathil

339. HDPE Pipe ISO 1133 CL 8 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume- flow rate (MVR) of thermoplastics Part 1: Standard method 8. Procedure A: Mass- measurement method

Street 41/Main Lab

1. Mohamed Bahnassy 2. David 3. Mohamed Abdelhameed 4. Jerry Beter 5. Glenn Oliver 6. Romel

340. HDPE Pipe ISO 1167-1 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method

Street 41/Main Lab





Section Location /


341. HDPE Pipe ISO 1167-2 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces

Street 41/Main Lab


342. HDPE Pipe ISO 1183-1 CL 5.1 Plastics — Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer 5.1 Method A — Immersion method

Street 41/Main Lab


343. HDPE Pipe ISO 2505 Thermoplastics pipes — Longitudinal reversion — Test method and parameters

Street 41/Main Lab


344. HDPE Pipe ISO 4065 Thermoplastics pipes — Universal wall thickness table

Street 41/Main Lab


345. HDPE Pipe ISO 4427-2 CL 5.1, 5.2, 6.1, 6.2, 6.3

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes, 5.1 Appearance, 5.2 Colour, 6.1 Measurements, 6.2 Mean outside diameter and out-of-roundness (ovality) 6.3 Wall thickness and their tolerances

Street 41/Main Lab


346. HDPE Pipe ISO 4427-2 CL 7 Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes, 7. Mechanical characteristics (Hydrostatic strength), (Maximum diameter 560 mm)

Street 41/Main Lab





Section Location /


347. HDPE Pipe ISO 4427-2 CL11 Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 2: Pipes 11. Marking

Street 41/Main Lab


348. HDPE Pipe ISO 4433-1 Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method Chemical Characteristics of Pipes in contact with Chemicals

Street 41/Main Lab

349. HDPE Pipe ISO 4433-2 Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes Chemical Characteristics of Pipes in contact with Chemicals

Street 41/Main Lab

350. HDPE Pipe ISO 6259-1 CL 10.2 Thermoplastics pipes — Determination of tensile properties, Part 1: General test method. 10.2 Elongation at break

Street 41/Main Lab


351. HDPE Pipe ISO 6259-3 Thermoplastics pipes — Determination of tensile properties Part 3: Polyolefin pipes

Street 41/Main Lab


352. HDPE Pipe ISO 6964 CL 4 Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test 4 Method A: Electrical tube furnace

Street 41/Main Lab





Section Location /


353. HDPE Pipe ISO 9969 Thermoplastics pipes — Determination of ring stiffness

Street 41/Main Lab


354. HDPE Pipe ISO 11357-6 Plastics — Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

Street 41/Main Lab


355. HDPE Pipe ISO 11922-1 CL 6 Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series 6. Measurement of dimensions

Street 41/Main Lab


356. HDPE Pipe ISO 13953 Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.

Street 41/Main Lab


357. HDPE Pipe ISO 18553 CL 4.1.2, 4.2

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds, 4.1.2 Microtome procedure, 4.2 Microscopic examination

Street 41/Main Lab


358. HDPE Pipe QCS 2014 QCS Section 08: Drainage Works, Part 03 Pipes & Fitting Materials, 3.10.2 Manufacturer 12. Markings

Street 41/Main Lab


359. 12.12 Leakage Testing of Buildings

AAMA 501.2 Quality Assurance and Diagnostic Water leakage field check for Storefronts, Curtain Walls and Sloped Glazing Systems

Street 41/ NDT LAB

1. Abdul Hameed 2. Jerry Beter 3. John Oliver 4. Mohamed Jamal




Section Location /


360. 4.15 Masonry Blocks & Paving Units

ASTM C140/C140M CL 8

Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units (Water Absorption for Interlocks)

Street 41/Durability Section



BS 6073-1 Compressive Strength of Concrete Masonry Blocks


1. Govinda Giri 2. Salman Ansari, 3. Mohhamad Arafath Mohiddeen Pichai 4. Mohhamad Arafath Mohamd Mustafa


BS 6717 Annex B Precast, unreinforced concrete paving blocks — Requirements and test methods (Measurement of Dimensions of Paving Blocks)


1. Mirendra Dhital, 2. Abdul Qader Mohamed Irfan, 3. Govinda giri 4. Salaman Ansari


BS 6717 Annex B Compressive Strength of Paving Blocks




BS 6717 Annex E Tensile Strength of Paving Blocks

Street 41/ Cocrete Section

1. Salman 2. Arafat 3. Govinda

365. Masonry Blocks & Paving Units

BS EN 771 +A1 (BS EN 772-11)

Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units




BS EN 771 12011+A1 (BS EN 772 12011+A1)

Determination of compressive strength


1. Abdul Qader Mohamed Irfan, 2. Salman Ansari 3. Govinda Giri




Section Location /



BS EN 771-1, BS EN 772-1

Determination of compressive strength




BS EN 771-1, BS EN 772-7

Methods of test for masonry units - (Determination of water absorption of clay masonry damp proof course units by boiling in water)




BS EN 771-1, BS EN 772-16

Specification for masonry units - Clay masonry units (Determination of Dimensions)




EN 771-3 Water Absorption for Masonry Blocks

Street 41/ Cocrete Section

1.Safar 2.Raj kumar 3.Glenn


BS EN 772-2 clause 8.2.3

Methods of test for masonry units. Determination of percentage area of voids in masonry units (by paper indentation)




BS EN 1338 Annex C Concrete paving blocks — Requirements and test methods (Measurement of the dimensions of a single block)




BS EN 1338 Annex E Water Absorption for Paving Blocks




BS EN 1338 Annex F Tensile Strength of Paving Blocks






Section Location /



BS EN 1339 Annex C Concrete paving flags — Requirements and test methods (Measurement of the dimensions of a single flag)




BS EN 1339 Annex E Determination of total water absorption




BS EN 1339 Annex F Measurement of bending strength and breaking load




EN 1340 Annex C Measurement of dimensions of a single unit




EN 1340 Annex E Determination of total water absorption




BS EN 1340 Annex F Concrete kerb units — Requirements and test methods (Measurement of bending strength)




BS EN 13748-1 CL 5.5

Terrazzo tiles — Terrazzo tiles for internal use (Breaking strength and breaking load)


1. Mirendra dhital


BS EN 13748-1 CL 5.8

Terrazzo tiles — Terrazzo tiles for internal use (Water absorption)



383. 9.91 Microbiology — Water and Wastewater

APHA/AWWA 22nd Ed., 923-E

Pseudomonas Aeruginosa Street 41/ Chemical section

1. Daylo Abante 2. Anuja 3. Al Cruz Atilano


APHA/AWWA 23rd Ed., 9222B & 9222D

Total Coliforms Street 41/ Chemical section

1. Ieza 2. Daylo Ariniente Abante

385. 9.79 9.85

Microbiology— Water and Wastewater

APHA/AWWA 23rd Ed., 9222D

Fecal Coliform Street 41/ Chemical section

1. Ieza 2. Daylo Ariniente Abante




Section Location /




Enzyme Substrate Test (E- Coli)


1. Daylo Abante 2. Al Cruz Atilano, 3. Anuja



Enzyme Substrate Test (Fecal Coliform)


1. Ieza 2. Al Cruz Atilano, 3. Ariel Audine Manongsong Daylo Abante



Total Coliforms Street 41/ Chemical section

1. Daylo Abante 2. Al Cruz Atilano, 3. Anuja

389. Microbiology — Water and Wastewater

NIOSH 0800 & ISO 16000-17:2011

Bioaerosol Sampling (Indoor Air)

Site test 1. Daylo Abante 2. Anuja 3. Van


WHO, Lab manual of Parasitological and Bacteriological Techniques, 1996

Nematodes (Helminths) Eggs Street 41/ Chemical section

1. Ieza 2. Daylo Ariniente Abante *

391. 10.4 Non Destructive Test

ASTM C805/C805M Standard Test Method for Rebound Number of Hardened Concrete1

Street 41/ NDT Section

1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola 7. Mohamad Sanaf


ASTM C900 Standard Test Method for Pullout Strength of Hardened Concrete

In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola


ASTM D2950/D2950M

Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

In-Situ 1. Crispin Dela Pena Dela Pena Dela Pena 2.Mohamed Nabil Awad, 3. Salvar Failano Lamarca




Section Location /



ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers



ASTM D4694 Deflections with a Falling- Weight-Type Impulse Load Device


Yousef Adnan Awad


ASTM D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

In-Situ 1. Michael Cahigan Agora 2. Glenn Oliveros


ASTM D4945 High-Strain Dynamic Testing of Deep Foundations (Pile Dynamic Test)

In-Situ Gireesh Vellalath


ASTM D5162 Method B

Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates



ASTM D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

In-Situ Jauhar Ali Khan


ASTM D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

In-Situ 1. Jerry Beter 2. Michael Cahigan Agora 3. Glenn Oliveros


ASTM D6167 Conducting Borehole Geophysical Logging: Mechanical Caliper

In-Situ Alexis Legaspi Lorica

402. Non Destructive Test

ASTM D6433 Roads and Parking Lots Pavement Condition Index Surveys, PCI

In-Situ Yousef Adnan Awad




Section Location /



ASTM D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

In-Situ Gireesh Vellalath


ASTM D7091 Type 2 gage

Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

Street 41/ NDT section

1. Michael Cahigan Agora 2. Glenn Oliveros 3. Mohamad Sanaf 4. Jerry Jr Pernito Beter


ASTM D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

Field 1. Mohammed Abdul Hameed Taofeek Abolaji 2. Jerry Better Jhon Oliver


ASTM E164 Contact Ultrasonic Testing of Weldments

In-Situ John Oliver


ASTM E165/E165M/ ASME 0 CLV

Standard Practice for Liquid Penetrant Examination for General Industry

In-Situ Rommel Frando Claridad


ASTM E303 and TRL Road Note 27

Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester


1. Adedayo Oluwole Aladesuru


ASTM E709/ ASME 0 CL V

Standard Guide for Magnetic Particle Testing

In-Situ Rommel Frando Claridad


ASTM E950/E950M Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

In-Situ 1. Yousef Adnan Awad Abolaji Ishaq 2. Okunolaq Okunola


ASTM E1926 and ASTM E950

Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

In-Situ 1. Yousef Adnan Awad Abolaji Ishaq 2. Okunolaq Okunola




Section Location /



ASTM G62 Method B Standard Test Methods for Holiday Detection in Pipeline Coatings



BS 1881-204 Testing concrete (Recommendations on the use of electromagnetic covermeters)

In-Situ 1. Jerry Beter 2. Exequiel Victorino Santos, 3. Michael Cahigan 4. Agora, 5. Glenn Oliveros, 6. Abolaji Ishaq Okunola 7. Mohamad Sanaf


BS 3262-1 Append. J Determination of Skid Resistance


1. Adedayo Oluwole Aladesuru


BS EN 12504-2 Testing concrete in structures Non-destructive testing — (Determination of rebound number)



BS EN-12504-3 Testing concrete in structures (Determination of pull-out force)



BS EN 12504-4 Determination of ultrasonic pulse velocity



BS EN 13036-4 Road and airfield surface characteristics. Test methods Method for measurement of slip/skid resistance of a surface: The pendulum test

In-Situ 1. Adedayo Oluwole Aladesuru




Section Location /



BS EN 13036-7 Road and airfield surface characteristics. Test methods Irregularity measurement of pavement courses. The straightedge test

In-Situ 1. Adedayo Oluwole Aladesuru


Gauge Manual Crack Width Gauge In-Situ 1. Jerry Beter, 2. Michael Cahigan Agora


Microscope Manual Crack Measurement Microscope

In-Situ 1. Jerry Beter 2. Michael Cahigan Agora


QCS 2014: CL 6-5 & User Guide of Machine

Surface Irregularities Test - By 3 meter long Rolling Straightedge


1. Adedayo Oluwole Aladesuru Mohd Bahnassi

423. Oil ASTM D93 Standard Test Methods for Flash Point by Pensky- Martens Closed Cup Tester

Street 41/ Bitumen Lab

1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa

424. Oil ASTM D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test



425. Oil ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) @ 40C






Section Location /


426. Oil ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) @ 100C



427. Oil ASTM D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

Street 41 / Chemial section

1. Moumene Abdellah 2. Al Cruz

428. Oil ASTM D892 Standard Test Method for Foaming Characteristics of Lubricating Oils


1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham bawa

429. Oil ASTM D1119 Standard Test Method for Percent Ash Content of Engine Coolants



430. Oil ASTM D1120 Standard Test Method for Boiling Point of Engine Coolants



431. Oil ASTM D1121 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts



432. Oil ASTM D1287 Standard Test Method for pH of Engine Coolants and Antirusts






Section Location /


433. Oil ASTM D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by the Hydrometer Method



434. Oil ASTM D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids



435. Oil ASTM D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)



436. Oil ASTM D2270 Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C



437. Oil ASTM D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration






Section Location /


438. Oil ASTM D3427 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils



439. Oil ASTM D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration


1.Thanveer Cresent House 2.Khalid

440. Oil ASTM D7946 Standard Test Method for Initial pH for Petroleum Products



441. 13.19 Paint ASTM D522/D522M Methods for Mandrel Bend Test of Attached Organic Coatings, Method B


1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy

442. 13.5 Paint ASTM D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer- Type Viscometer

Street 41/ Bitumen Section

1. Adedayo Oluwolfe Aladesuru 2. Hossam Yakoub

443. 13.2 Paint ASTM D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers



444. 13.8 Paint ASTM D1210 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage






Section Location /


445. 13.3 Paint ASTM D1212 Measurement of Wet Film Thickness of Organic Coatings

Street 41/ Polymer Lab

1-Mohamed Bahnassy 2-ADE 3-Yakoub 4-yousra 5-Leslie 6-Ansar

446. 13.1 Paint ASTM D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

Street 41/ Bitumen Section

1. Adedayo Oluwolfe Aladesuru 2. Hossam Yakoub

447. 13.25 Paint ASTM D1640/D1640M

Standard Test Method for Drying, Curing, or Film Formation of Organic Coatings, Method B



448. 13.27 Paint ASTM D1647 Standard Test Methods for Resistance of Dried Films of Varnishes to Water and Alkali



449. 13.26 Paint ASTM D2196 Rheological Properties of Non-Newtonian Materials by Rotational Viscometer



450. 13.17 Paint ASTM D2369 Standard Test Method for Volatile Content of Coatings


1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Leslie Tenoria Trumata

451. 13.22 Paint ASTM D2370 Tensile Properties of Organic Coatings

Street 41/ Geotextile Lab


452. 13.4 Paint ASTM D2486 Standard Test Method for Scrub Resistance of Wall Paints






Section Location /


453. Paint ASTM D3359 Standard Test Methods for Rating Adhesion by Tape Test


1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Jerry Beter

454. 13.14 Paint ASTM D3723 Standard Test Method for Pigment Content of Water- Emulsion Paints by Low- Temperature Ashing



455. 13.6 Paint ASTM D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator



456. Paint ASTM D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages



457. 13.13 Paint ASTM D4541 Adhesion (Pull off) strength In- Situ 1-Jhon 2-Jerry 458. 13.15 Paint ASTM D5401 & BS

EN ISO 2812-2 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood



459. 13.11 Paint BS EN ISO 787-9 Determination of pH value of aqueous suspension

Street 41/ Chemical Section

1. Muneer MC 2. Al Cruz Atilano

460. 13.20 Paint BS EN ISO 1519 BS 3900-E1

Paints and varnishes. Bend test (cylindrical mandrel).






Section Location /


461. 13.12 Paint BS EN ISO 2409 (BS 3900-E9)

Paints and varnishes. Cross-cut test.


1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Jerry Beter

462. 13.7 Paint BS EN ISO 2813, ASTM D523

Paints and Varnishes - Determination of Specular Gloss of Non-Metallic Paint Films at 20o and 60o and 85o



463. Paint BS EN ISO 2814 Average Reflectance (Calculation Method)



464. 13.10 Paint BS EN ISO 2814 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour



465. Paint BS EN ISO 4624 Paints and varnishes. Pull- off test for adhesion.


1. Mohammed Abdel Hameed 2. Adedayo 3. Glenn Oliveros 4. Mohamad Abhnassy 5. Leslie Tenoria Trumata

466. 13.9 Paint ISO 7724-2 Determination of color and color difference



467. Pavement Markings

AASHTO M249 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form) (Daylight reflectance at 45°)

Street 41/Bitumen Lab

1. Adedayo Oluwole Aladesuru 2. Piyal Kumara




Section Location /



AASHTO M249 Standard Specification for White and Yellow Reflective Thermoplastic Striping Material (Solid Form) (Drying Time for Road Marking)



469. 6.68 Pavement Markings

AASHTO T250 CL 5 and ASTM D4797

Standard Method of Test for Thermoplastic Traffic Line Material (Determination of Binder Content)




AASHTO T250 CL 6 and ASTM D4797 CL 11

Standard Method of Test for Thermoplastic Traffic Line Material (Determination of Glass beads Content)


Adedayo Aladesuru Piyal Kumara, Benderson


ASTM D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages


1. Adedayo Aladesuru 2. Piyal Kumara 3. Benderson


ASTM E1710 Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer




ASTM E2302 Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer




BS 2000-35 Petroleum and its Products. Determination of flash and fire Point-Pensky - Martens method (Flash Point (Open) of Thermoplastic Material)


Adedayo Aladesuru Piyal Kumara Benderson


BS 3262-1 Append. C

Binder Content of Thermoplastic Material




BS 3262-1 Append. D

Glass Bead Content of Thermoplastic Material






Section Location /



BS 3262-1 Append. D

Combined Gradation of Material


1-Mohamed Bahnassy 2-ADE 3-Yakoub


BS 3262-1 Append. F

Hot-applied thermoplastic road marking materials and mixtures — Specification for constituent materials and mixtures (Luminance Factor)




BS 3262-1 Append. H

Determination of Flow Resistance




BS 3262-3–Ap. B Hot-applied thermoplastic road marking materials and mixtures — Specification for application of material to road surfaces (Drying Film Thickness)




BS 3262-3 Append. C

Determination of density Street 41/Bitumen Lab



BS 6088 Appendix B Solid glass beads for use with road marking compounds and for other industrial uses (Particle Size Distribution of Glass Beads)




BS EN 1436 Annex A&B

Road marking materials — Road marking performance for road users (Measurement of Retro- reflectivity of pavement marking materials)




BS EN 13197 Annex C / 2011

Wet Film Thickness by Notch Gauge






Section Location /


485. Performance Graded Asphalt Binder

AASHTO R29 Standard Practice for Grading or Verifying the Performance Grade ( PG ) of an Asphalt Binder


1. Adedayo oluwole aladesuru 2. Benderson

486. 6.5 Performance Graded Asphalt Binder

ASTM D5/D5M Standard Test Method for Penetration of Bituminous Materials




ASTM D6/D6M Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds




ASTM D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)




ASTM D70 Density of Semi-Solid Bituminous Material (Pycnometer Method)




ASTM D88 Saybolt Viscosity Street 41/Bitumen Lab





Section Location /



ASTM D92 and AASHTO T048

Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester




ASTM D95 Water in Petroleum Products and Bituminous Material by Distillation




ASTM D113 Standard Test Method for Ductility of Bituminous Materials




ASTM D139 Standard Test Method for Float Test for Bituminous Materials




ASTM D140 Standard Practice for Sampling Bituminous Materials




ASTM D402/D402M Standard Test Method for Distillation of Cutback Asphalt





Solubility of Asphalt Material In Trichloroethylene




ASTM D2170/D2170M

Kinematic Viscosity @ 60°C Street 41/Bitumen Lab




Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) RTFOT






Section Location /



ASTM D2995 Standard Practice for Estimating Application Rate of Bituminous Distributors




ASTM D4402/D4402M and AASHTO T316

Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer (RV)




ASTM D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge




ASTM D6521 and AASHTO R28

Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)


1. Mohamad Abhnassy 2. Adedayo 3. Yaakoub dkhillali . 4. Leslie Tenoria Trumata 5. Marl Wilson Arellano De Vera 6. Lester rosales evangelista 7. Faisal atham baw7



Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)




ASTM D6930 Settlement and Storage Stability of Emulsified Asphalts




ASTM D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)




ASTM D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt






Section Location /



ASTM D6997 Distillation of Emulsified Asphalt




ASTM D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt





Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)





Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer




ASTM D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer




BS 3262-3 Append. C

Determination of density Street 41/Bitumen Lab



BS EN 1426, BS 2000-49

Determination of Needle Penetration



515. 6.63 & 6.66

Performance Graded Asphalt Binder

BS EN 1427-2007, BS 2000-58

Bitumen and bituminous binders - (Determination of Softening Point (Ring & Ball Method))






Section Location /



BS EN 12595, BS 2000-319

Methods of test for petroleum and its products BS 2000-319: Bitumen and bituminous binders - Determination of kinematic viscosity (Identical with IP 319-2000)


1. Mohammed Abdelmoein 2. Ibrahim Bahnassy 3. Adedayo Oluwole Aladesuru. 4. Piyal Kumara


BS EN 12607-1 BS 2000-460.1

Methods of test for petroleum and its products - BS 2000-460.1: Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air Part 1: RTFOT method (Identical with IP 460.1:2000)




BS EN 13589, BS 2000-520

Methods of test for petroleum and its products — BS 2000-520: Bitumen and bituminous binders — Determination of the tensile properties of modified bitumen by the force ductility method (Identical with IP 520- 2004)




BS EN 22592, BS 2000-403, ISO 2592

Methods of test for Petroleum and its Products Part 403. Petroleum products - determination of flash and fire points - Cleveland open cup method (Identical with IP 403/94)



520. PVC Pipe BS EN 580 Resistance to Dichloromethane

Chemical Lab Room 7, Street 41, Industrial Area

1- Mohamed Bahnaasy 2- Kareem Shokri




Section Location /


521. 99.99 PVC Pipe BS EN 744, BS 2782-11 Method 1108C

Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the- clock method.

Street 41 Lab / Membrane / Geotextile Section

1- Mohamed Bahnaasy 2- David Onishile

522. 99.99 PVC Pipe BS EN 1411, BS 2782-11 Method 1108B

Plastics piping and ducting systems. Thermoplastics pipes. Determination of resistance to external blows by the staircase method

Street 41 Lab / Membrane / Geotextile Section

1- Mohamed Bahnaasy 2- David Onishile

523. PVC Pipe BS EN ISO 2505 Longitudinal Reversion Soil Lab GF-6, Street 41, Industrial Area


524. PVC Pipe BS EN 61386-1, CL 7.6 / GSO 32, CL 4.3

Marking and documentation Geotextile & Membrane, Lab 29, Street 41


525. PVC Pipe BS EN 61386-1, CL 8 & Annex B.1 / GSO 32, CL 4.4

Dimensions Geotextile & Membrane, Lab 29, Street 41


526. PVC Pipe BS EN 61386-1, CL 10.2.GSO 32, CL 5

Compression test Geotextile & Membrane, Lab 29, Street 41

1- Bahnaasy 2- Kareem Shukri

527. PVC Pipe EN 61386-1, CL 10.3 / GSO 32, CL 10

Impact Test Geotextile & Membrane, Lab 29, Street 41


528. PVC Pipe EN 61386-1, CL 10.4, IEC 61386-21 CL 10.4.102 GSO 32, CL 6.2

Bending Test Geotextile & Membrane, Lab 29, Street 41


529. PVC Pipe EN 61386-1, CL 10.6, IEC 61386-21 CL 10.6.102, GSO 32,CL 11

Collapse test Geotextile & Membrane, Lab 29, Street 41





Section Location /


530. PVC Pipe EN 61386-1, CL 13.1.3.2 / GSO 32 CL 8

Fire hazard Outside Corridor between building near Soil/Aggregate Sample Door, Street 41


531. Reaction to fire tests

ISO 1716 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)

Street 41/Main Lab

1-Mohamed Jamal 2-sujan shrestha 3-Mohamed Aslam 4-Arif Hasain


BS EN ISO 9239-1 Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source.

Street 41/Main Lab

1. Mohamed Aslam 2.Mohamed Jamal 3.Sujan Shrestha 4.Ahmed Rashed


ISO 11925-2 Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test

Street 41/Main Lab

1-Mohamed Jamal 2-sujan shrestha 3-Mohamed Aslam 4-Arif Hasain

534. 1.4 Soil ASTM D1140 Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

Street 41/Soil Lab

1-Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Yasin Hosny .

535. 1.8 Soil ASTM D1556/D1556M

Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method

Street 41/Soil Lab

1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Yasin Hosny .




Section Location /


536. 1.6 Soil ASTM D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

Street 41/Soil Lab

1-Mohammed Jamal abd El-Radi 2- Sunday izukwe 3- Ahamed abo-bakr al- lisy 4- Masoud Ghali 5- Ahmed Shaban 6- Hassan Ali 7- Mohamed Aslam 8- Ahamed Mahmoud Rashed 9- Mohamed Anifa Maskoor 10- Bles nforneh molah

537. 1.11 Soil ASTM D1883 CBR (California Bearing Ratio) of Laboratory- Compacted Soils (Soaked)

Street 41/Soil Lab

1-Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Mohamad Aslam Nagoor 6- Abayomi Philip 7- Irshad Ansari 8- Arif Hussain 9- Victor Chidiadi 10- Massoud Kamel 11- Maskkor Mohamed anifa

538. 1.2 Soil ASTM D2216-10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

Street 41/Soil Lab

1- Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5- Yasin Hosny

539. 1.5 Soil ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

Street 41/Soil Lab

1-Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Mohamad Aslam Nagoor 6- Abayomi Philip 7- Irshad Ansari 8- Arif Hussain 9- Victor Chidiadi 10- Massoud Kamel 11- Maskkor Mohamed Anifa




Section Location /


540. 1.12 Soil ASTM D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

Street 41/Soil Lab

1-Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5-Mohamad Aslam Nagoor 6-Abayomi Philip 7-Irshad Ansari 8-Arif Hussain 9-Victor Chidiadi 10-Massoud Kamel 11-Maskkor Mohamed anifa

541. 1.7 Soil ASTM D4718/D4718M

Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

Street 41/Soil Lab

1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed.

542. 1.10 Soil ASTM D4944 Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

Street 41/Soil Lab

1-Sunday 2- Bles Molah 3- Mohammed Jamal 4- Ahmed Rasheed 5- Yasin Hosny

543. Soil ASTM D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

Street 41/Soil Lab

1-Glenn Oliveros 2-Michael Cahigan Agora Mohammed 3-Jamal Mohammed abdulhamid

544. 1.3 1.11

Soil ASTM D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

Street 41/Soil Lab


545. 1.9 Soil ASTM D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil- Aggregate by Nuclear Methods (Shallow Depth)

Street 41/Soil Lab

1- Crispin 2- mohd Nabil 3- Renial 4- Alshabah 5- Eroul 6- Marlod 7- Roberto 8- JR 9- Salvar




Section Location /


546. Soil ASTM D7625 Abrasiveness of Rock Using the CERCHAR Method

Street 41/Soil Lab

1- Sunday 2- Mohammed Jamal 3- Ahmed Rasheed 4-Irshed Ansari

547. 1.14 Soil BS 1377-2 CL 3.2 Methods of test for Soils for civil engineering purposes (Determination of Moisture Content (Oven Drying method))

Street 41/Soil Lab


548. 1.15 Soil BS 1377-2 CL 4.3 Determination of liquid Limit (Cone Penetrometer)

Street 41/Soil Lab


549. 1.16 Soil BS 1377-2 CL 4.5 Determination of Liquid Limit (Casagrande Method)

Street 41/Soil Lab


550. 1.17 Soil BS 1377-2 CL 5 Methods of test for Soils for civil engineering purposes (Determination of Plastic Limit and Plasticity Index)

Street 41/Soil Lab

1- Sunday 2- Bles Molah 3- Mohammed Jamal. 4- Ahmed Rasheed. 5- Yasin Hosny .

551. Soil BS 1377-2 CL 6.5 Methods of test for Soils for civil engineering purposes (Linear shrinkage)

Street 41/Soil Lab

1-Tohidul Islam Ashraful Islam 2-Sunday Ifeanyichukwu Izukwe 3-Mohammed Gamal Abdulradi Alsayed 4-Mohammed Abdulhamid Abdulalim Ali 5-Esosa Simeon Omwanghe

552. 1.18 Soil BS 1377-2 CL 9.2 Determination of Particle Size Distribution (Wet Sieve Method)

Street 41/Soil Lab


553. 1.19 Soil BS 1377-2 CL 9.3 Determination of Patricle Size Distribution (Dry Sieve Method)

Street 41/Soil Lab





Section Location /


554. 1.20 Soil BS 1377-4 CL 3.2 & 3.5 & 3.6

Methods of test for Soils for civil engineering purposes Compaction Related Test (Proctor Test) (Using 4.5 kg Rammer)

Street 41/Soil Lab


555. 1.21 Soil BS 1377-4 CL 7 Determination of California Bearing Ration (CBR)

Street 41/Soil Lab

1- Mohammed Gamal 2- Abdulradi Alsayed (1) 3- Yassine Hosni (1) 4- Mohammed Abdulhamid 5-Abdulalim Ali (1) 6- Bles Nforneh Molah(1) 7- Sunday Ifeanyichukwu 8- Izukwe Ifeanyichukwu Izukwe (2) 9- Ahmed Mahmoud Rashid 10- Ahmed (2)

556. 1.22 Soil BS 1377-9 CL 2.1 In-Situ Density Test (Sand Replacement Method- Small Pouring Cylinder)

Street 41/Soil Lab

1- Sanjay Kumar Sah 2- Rom Bahadur Ale 3- Ian Bueno Janerol

557. 1.23 Soil BS 1377-9 CL 2.2 Methods of test for Soils for civil engineering purposes (In-Situ Density Test (Sand Replacement Method - Large Pouring Cylinder))

Street 41/Soil Lab

1- Sanjay Kumar Sah 2- Rom Bahadur Ale 3- Ian Bueno Janerol

558. 1.24 Soil BS 1377-9 CL 2.5 Methods of test for Soils for civil engineering purposes (In-Situ Density Test (Nuclear Gauge Method))

Street 41/Soil Lab

1- Crispin Dela Pena Dela Pena 2- Mohamed Nabil Awad, 3- Salvar Failano Lamarca

559. 8.21 Soil BS 1377-9 CL 4.1 Determination of the vertical deformation of soil by plate loading test

Street 41/Soil Lab





Section Location /


560. Soil BS EN 13286-41 Unbound and hydraulically bound mixtures (Test method for determination of the compressive strength of hydraulically bound mixtures)

Street 41/Soil Lab

Glenn Oliveros Michael Cahigan Agora

561. Soil BS EN 13286-51 Unbound and hydraulically bound mixtures (Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction)

Street 41/Soil Lab

Glenn Oliveros Michael Cahigan Agora

562. Soil BS EN ISO 17892-1 Determination of water content

Street 41/Soil Lab

1- Sunday 2- Mohammed Jamal. 3- Ahmed Rasheed. 4-Irshed Ansari

563. Soil BS EN ISO 17892-2 Determination of bulk density

Street 41/Soil Lab


564. Soil ISO/TS 17892 Determination of Atterberg limits

Street 41/Soil Lab


565. 7.2 Steel ASTM A370 CL 6 Mechanical Testing of Steel Products

Street 41/ Metallurgy Lab

1. Rommel Frando Claridad

566. Steel ASTM A615/A615M Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement



567. 7.10 Steel ASTM A931 Standard Test Method for Tension Testing of Wire Ropes and Strand

Street 41/ Steel Lab

Rommel Claridard

568. 7.9 Steel ASTM A1061/ A1061M & A416/ A416M

Yield Strength— Elongation - Breaking Strength


1. Rommel Frando Claridad 2. Robert Tambic

569. 7.3 Steel BS 4449 App.C, CL 6.1

Bend Test Street 41/ Metallurgy Lab





Section Location /


570. 7.4 Steel BS 4449: App.E CL E1.6

Rebend Test Street 41/ Metallurgy Lab


571. 7.11 Steel BS EN 124 CL 8 Load Test Street 41/ Metallurgy Lab


572. - Steel BS EN 124-1 Load Test Street 41/ Metallurgy Lab

Rommel Claridard

573. - Steel BS EN 124-2 Load Test- Gully tops and manhole tops made of cast iron


Rommel Claridard

574. - Steel BS EN 124-3 Load Test- Gully tops and manhole tops made of steel or aluminum alloys



575. - Steel BS EN 124-4 Load Test- Gully tops and manhole tops made of steel reinforced concrete


Rommel Claridard

576. - Steel BS EN 124-5 Load Test- Gully tops and manhole tops made of composite materials


Rommel Claridard

577. - Steel BS EN 124-6 Load Test- Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly (vinyl chloride) (PVC-U)


Rommel Claridard

578. Steel BS EN ISO 6892-1- CL 18 & BS 4449+A3 (App.C, CL 1.4 & ISO 15630-1 CL 5 (E)

Metallic Materials Tensile Testing (Tensile Test)



579. 7.1 Steel BS EN 10002-1 Tensile Test Street 41/ Metallurgy Lab


580. 7.8 Steel ISO 15630-3(E) + BS 5896

Tensile test - Yield Strength— Elongation



581. Steel Chemistry ASTM E415 Standard Test Method for Analysis of Carbon and Low- Alloy Steel by Spark Atomic Emission Spectrometry (C, Si,S, P, Mn, Ni, Cr, Mo,Cu, Sn, Al, V, Pb, V )

Strteet 41/ NDT Section

Thanveer Cresent House




Section Location /


582. Thermal performance of building material and products

BS EN 12664 Thermal performance of building materials and products - Determination of thermal resistance (R value) by heat flow meter method.

Street 41/ Main Lab

1. Sujan Shrestha 2. Mohamed Jamal 3.Bles Molah 4. Ahmed Rashed

583. Toys BS EN 71-1 Safety of toys. Mechanical and physical properties, CL 8.8 Compression test, CL 8.9 Soaking test-clause, CL 8.4 Tension test-clause, CL 8.5 Drop test-clause, CL 8.21 Static strength test, CL 8.2 Small parts cylinder, CL 8.11 Sharpness of edges, CL 8.12 Sharpness of points, CL 8.10 thru 8.10.3 Accessibility of a part or component

Street 41 / Soil section

1. Mohamed Jamal 2. Bles Molah 3. Mohamed Aslam 4. Ahmed rashed 5. Sujen

584. Toys BS EN 71-2 +A1 Flammability test Street 41 / Soil section

1. Mohamed Jamal 2. Bles Molah 3. Mohamed Aslam 4. Ahmed rashed

585. Toys BS EN 71-3 +A2-3 Safety of Toys: Migration of Certain Elements – Aluminum, Antimony, Arsenic, Barium, Boron, Cadmium, Chromium (III), Chromium (VI), Cobalt, Copper, Lead, Manganese, Mercury, Nickel, Selenium, Strontium, Tin, Zinc



586. UPVC Pipe ASTM D256 – 04 Method A

Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics Method A

Street 41/Main Lab





Section Location /


587. UPVC Pipe BS EN ISO 527-1 CL 10.1

Plastics — Determination of tensile properties Part 1: General principles, 10.1 Stress

Street 41/Main Lab


588. UPVC Pipe BS EN ISO 527-2 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Street 41/Main Lab


589. UPVC Pipe BS EN 727:1995 Plastics piping and ducting systems — Thermoplastics pipes and fittings — Determination of Vicat softening temperature (VST)

Street 41/Main Lab


590. UPVC Pipe BS EN 1401-1 CL 6.2 Plastic piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system, Cl 5.1 Appearance,colour, Cl 5.2 Colour, Cl 6.2.1 Outside diameters Cl 6.2.2 Out of roundness Cl 6.2.5 Wall thickness

Street 41/Main Lab


591. UPVC Pipe BS EN 1401-1 CL 12 Plastic piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system 12. Marking

Street 41/Main Lab





Section Location /


592. UPVC Pipe EN ISO 3126 CL 5.2, 5.3.2, 5.3.3, 5.3.4, 5.4

Plastics piping systems — Plastics components — Determination of dimensions, 5.2 Wall Thickness 5.3.2 Measurement of maximum and minimum diameter, 5.3.3 Mean Outside Diameter, 5.3.4 Mean Inside Diameter, 5.4 Out-of-Roundness

Street 41/Main Lab


593. UPVC Pipe ISO 1167-1 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method

Street 41/Main Lab


594. UPVC Pipe ISO 1167-2 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces

Street 41/Main Lab


595. UPVC Pipe ISO 1183-1 CL 5.1 Plastics — Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer 5.1 Method A — Immersion method

Street 41/Main Lab


596. UPVC Pipe ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters

Street 41/Main Lab


597. 11.16 Water proofing Membrane & Rubber

ASTM D412 Tensile strength of Vulcanized Rubber and Thermoplastic Elastomers

Street 41/ Geotextile & Membrane Lab





Section Location /



ASTM D543 Evaluating the Resistance of Plastics to Chemical Reagents




ASTM D570 Water Absorption of Plastics Street 41/ Geotextile & Membrane Lab



ASTM D638 Tensile Properties of Plastics Street 41/ Geotextile & Membrane Lab


601. Water proofing Membrane & Rubber

ASTM D714 Sulphuric Acid Immersion Test of Internal Lining

Street 41/ Geotextile & Membrane, & Chemical Section



ASTM D792 Density and Specific Gravity (Relative Density) of Plastics by Displacement




ASTM D882 Tensile Properties of Thin Plastic Sheeting




ASTM D903 Peel or Stripping Strength of Adhesive Bonds




ASTM D1000 Pressure-Sensitive Adhesion to Primed Concrete




ASTM D1004 Tear Resistance (Graves Tear) of Plastic Film and Sheeting




ASTM D1238 Melt Flow Rates of Thermoplastics by Extrusion Plastometer




ASTM D1653 Vapor Permeability of Internal




ASTM D1709 Impact Resistance of Plastic Film by the Free- Falling Dart Method






Section Location /



ASTM D1876 Peel Resistance of Adhesives (T-Peel Test)




ASTM D2240 Rubber Property— Durometer Hardness




ASTM D3767 Rubber—Measurement of Dimensions (Thickness)




ASTM D4060 Abrasion Resistance of Organic Coatings by the Taber Abraser




ASTM E96/E96M Water Vapor Transmission of Materials




ASTM E154 CL 10 Resistance to Puncture Street 41/ Geotextile & Membrane Lab



BS EN 1849-2 Determination of thickness and mass per unit area of Plastic and rubber sheets




DIN 53854 Weight Street 41/ Geotextile & Membrane Lab



DIN 53855 Thickness Street 41/ Geotextile & Membrane Lab



DIN 54307 CBR test Street 41/ Geotextile & Membrane Lab



ISO 527-1 Tensile Properties of Plastics Street 41/ Geotextile & Membrane Lab


621. 2.4 Aggregates ASTM C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

ACES Site Lab 1 - Al Bustan

1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon 4. Hafsal Cheriya




Section Location /


622. 2.6 Aggregates ASTM C127 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate


1. Irshad Ansari 2. Esosa Simeon 3. Hafsal Cheriya

623. 2.5 Aggregates ASTM C128 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate



624. 2.3 Aggregates ASTM C136/C136M Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates


1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon 4. Hafsal Cheriya Simeon 4. Hafsal Cheriya

625. 2.17 Aggregates ASTM C142/C142M Standard Test Method for Clay Lumps and Friable Particles in Aggregates


1. Irshad Ansari 2. Esosa Simeon

626. 2.2 Aggregates ASTM C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size


1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon 4. Hafsal Cheriya

627. 2.1 Aggregates ASTM D75/D75M Standard Practice forSampling Aggregates


1. Mohamed Riyas 2. Irshad Ansari 3. Esosa Simeon

628. 2.16 Aggregates ASTM D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate



629. 2.7 Aggregates ASTM D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate



630. 2.11 Aggregates BS 812-102 Testing aggregates. Methods for sampling



631. 2.14 Aggregates BS 812-110 Testing aggregates. Methods for determination of aggregate crushing value (ACV)






Section Location /


632. 2.13 Aggregates BS 812-111 Testing aggregates. Methods for determination of ten per cent fines value (TFV)



633. 2.10 Aggregates BS EN 932-1 Tests for general properties of aggregates. Methods for sampling



634. 2.9 Aggregates BS EN 932-2 Tests for general properties of aggregates. Methods for reducing laboratory samples



635. 2.8 Aggregates BS EN 933-1 Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method



636. 2.15 Aggregates BS EN 933-3 Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index



637. 2.18 Aggregates BS EN 933-7 Tests for geometrical properties of aggregates. Determination of shell content. Percentage of shells in coarse aggregates


1. Esosa Simeon

638. 2.12 Aggregates BS EN 1097-6 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption



639. 4.2 Asphalt AASHTO R47 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size


1. Hamil Hassan 2. Mohamed Riyas 3. Esosa Simeon

640. 4.1 Asphalt ASTM D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures


1. Hamil Hassan 2. Mohamed Riyas 3. Esosa Simeon 4. Nnoku Ekane


Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures


1. Mohamed Riyas 2. Esosa Simeon 3. Hamil Hassan




Section Location /


642. 4.5 Asphalt ASTM D2172/D2172 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures


1. Mohamed Riyas 2. Esosa Simeon


Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures



644. 4.12 Asphalt ASTM D2995 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors


Mr. Nnoku Ekane Mr. Mohamed Riyas Mr. Esosa Simeon Mr. Hamil Hassan


Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures




Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens




Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing


1. Nnoku Ekane 2. Mohamed Riyas 3. Esosa Simeon 4. Hamil Hassan

648. 4.6 Asphalt ASTM D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate



649. 4.4 Asphalt ASTM D6926 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus



650. 4.10 Asphalt ASTM D6927 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures



651. 4.13 Asphalt BS EN 12697-27 Bituminous mixtures Test methods for hot Mix Asphalt - Part 27: Sampling


1. Hamil Hassan 2. Mohamed Riyas 3. Esosa Simeon 4. Nnoku Ekane




Section Location /


652. 3.1 Concrete BS EN 12350-1 Testing fresh concrete. Sampling


1. Heyford Attuah 2. Thasleem 3. Danilo Ramos 4. Jaime Bautista 5. Bhim Kunwar

653. 3.2 Concrete BS EN 12350-2 Testing fresh concrete. Slump-test



654. 3.4 Concrete BS EN 12390-1 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds


1. Sajid Tagayan 2. Esosa Simeon 3. Thasleem

655. 3.3 Concrete BS EN 12390-2 Testing hardened concrete. Making and curing specimens for strength tests



656. 3.7 Concrete BS EN 12390-3: Annex B

Testing hardened concrete. Compressive strength of test specimens


1. Sajid Tagayan 2. Thasleem 3. Esosa Simeon

657. 3.5 Concrete BS EN 12390-7 Testing hardened concrete. Density of hardened concrete



658. 3.6 Concrete BS EN 12504-1 Testing concrete in structures. Cored specimens. Taking, examining and testing in compression



659. 1.5 Soil ASTM D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN- m/m3))


1. Irshad Ansari 2. Hafsal Cheriya 3. Esosa Simeon



1. Esosa Simeon 2. Irshad Ansari 3. Hafsal Cheriya




Section Location /


661. 1.8 Soil ASTM D1556 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method


1. Irshad Ansari 2. Hafsal Cheriya







664. 1.2 Soil ASTM D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass



665. 1.3 Soil ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils



666. 1.9 Soil ASTM D4718/D4718M




667. 1.11 Soils ASTM D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis


1. Esosa Simeon 2. Irshad Ansari 3. Hafsal Cheriya

668. - Asphalt AASHTO R47 Reducing Samples nof Hot Mix Asphalt (HMA) to Testing Size

ACES Site Lab 2 - Al Khor

1. Tohidul Islam 2. HMM Azam 3. Mohamed Rizwan 4. Mojahid Ansari 5. Njoh Yannick 6. Mohamed Arshath




Section Location /


669. 6.22 Asphalt ASTM D979/D979M Sampling Bituminous Paving Mixtures


1. Mam Azam 2. Samyog Dhakal 3. Sembo Kosimee 4. Anselme Wameni 5. Abdul Alim 6. Salifou Sufah 7. Bola Lawal 8. Sagar Upreti 9. Mojahid Ansari 10. Hmm Azam 11. Mohamed Arafath 12. Tohidul Islam 13. Njoh Yannick


Maximum Specific Gravity and Density


1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. Peter Omoshuli


Quantitative Extraction of Bitumen from Bituminous Paving Mixtures Section 7d


1. Njoh Yannick 2. Mohamed Riswan 3. Mohamed Arshath 4. Tohidul Islam


Bulk Specific Gravity and Density


1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. Mohamed Arafath 5. HMM Azam

673. 6.3 Asphalt ASTM D2995 Application Rate of Bituminous Distributors


1. Tohidul Islam 2. HMM Azam 3. Mohamed Arafath 4. Mohamed Rizwan 5. Mojahid Ansari 6. Mam Azam 7. Abdul Alim 8. Njoh Yannick 9. Samyog Dhakal 10. Sembo Kosimee

674. - Asphalt ASTM D3203/D3203M

Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures


1. Njoh Yannick 2. Mojahid Ansari3. Tohidul Islam




Section Location /





1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. Mohamed Arafath s 5. HMM Azam b


Sampling Compacted Bituminous Mixtures for Laboratory Testing


1. Asagar Ali 2. Miya Safi 3. Tohidul Islam 4. Njoh Yannick

677. 6.34 Asphalt ASTM D5444 Mechanical Size Analysis of Extracted Aggregate


1. Njoh Yannick2. Mohamed Riswan3. Mohamed Arshath4. Tohidul Islam

678. 6.24 Asphalt ASTM D6926 Preparation of Bituminous Specimens Using Marshall Apparatus


1. Mojahid Ansari 2. Sagar Upreti 3. Salifou Sufah 4. Hmm Azam 5. Njoh Yannick 6. Tohidul Islam

679. 6.30 Asphalt ASTM D6927 Marshall Stability and Flow of Bituminous Mixtures


1. Njoh Yannick 2. Tohidul Islam 3. Mojahid Ansari 4. HMM Azam

680. Asphalt BS EN 12697 Bituminous Mixtures - Test methods for hot mix asphalt - Part 27: Sampling Cl 4.3 Sampling from the Material Around the Augers of the Paver


681. 2.4 Aggregates ASTM C117 Material Finer than 0.075 mm

ACES Site Lab - Mesaimeer

1. Nishadh Deepal 2. Uzor Ikechukwu 3. Aneesh Babu 4. Frank

682. 2.6 Aggregates ASTM C127 Determination of Specific Gravity and Water Absorption of Coarse Aggregate



683. 2.5 Aggregates ASTM C128 Determination of Specific Gravity and Water Absorption of Fine Aggregate






Section Location /


684. 2.3 Aggregates ASTM C136/C136M Particle Size Distribution ACES Site Lab - Mesaimeer


685. 2.7 Aggregates ASTM C142/C142M Test Method for Clay Lumps and Friable Particles in Aggregates


1. Nishadh Deepal 2. Aneesh Babu 3. Frank

686. 2.2 Aggregates ASTM C702/C702M Reducing Samples to Testing Size



687. 2.1 Aggregates ASTM D75/D75M Sampling of Aggregates ACES Site Lab - Mesaimeer


688. 2.15 Aggregates ASTM D546 Sieve Analysis of Mineral Filler for Bituminous paving Mixtures


1. Nishad Deepal 2. Aneesh Babu 3. Frank

689. 1.13 Aggregates ASTM D2419 Sand Equivalent Value ACES Site Lab - Mesaimeer


690. 2.10 Aggregates ASTM D4791 Flat and Elongated Particles ACES Site Lab - Mesaimeer


691. - Aggregates BS EN 932-1 Methods for sampling Aggregates



692. - Aggregates BS EN 932-2 Methods for reducing laboratory samples



693. 2.23 Aggregates BS EN 933-1 Determination of Particle Size Distribution - Sieving Method






Section Location /


694. 2.29 Aggregates BS EN 933-3 Determination of particleshape — Flakiness index


1. Nishadh Deepal2. Aneesh Babu3. Frank

695. 2.28 Aggregates BS EN 933-7 Determination of shell content - Percentage of shells in coarse aggregates



696. - Asphalt AASHTO R47 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size


1. Nishadh Deepal 2. Mostafa Mohamed 3. Aneesh Babu

697. 6.22 Asphalt ASTM D979/D979M Sampling Bituminous Paving Mixtures


1. Mohamed Riswan 2. Nishadh Deepal 3. Mostafa Mohamed 4. Aneesh Babu


Maximum Specific Gravity and Density




Quantitative Extraction of Bitumen from Bituminous Paving Mixtures




Bulk Specific Gravity and Density



701. 6.3 Asphalt ASTM D2995 Application Rate of Bituminous Distributors


1. Nishadh Deepal 2. Mostafa Mohamed 3. Mohamed Riswan 4. Aneesh Babu

702. - Asphalt ASTM D3203/D3203M

Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures








Sampling Compacted Bituminous Mixtures for Laboratory Testing






Section Location /


705. 6.34 Asphalt ASTM D5444 Mechanical Size Analysis of Extracted Aggregate



706. 6.24 Asphalt ASTM D6926 Preparation of Bituminous Specimens Using Marshall Apparatus



707. 6.30 Asphalt ASTM D6927 Marshall Stability and Flow of Bituminous Mixtures



708. 6.47 Asphalt BS EN 12697-27 Test Methods for Hot Mix Asphalt-Sampling



709. 3.21 Concrete BS EN 12350-1 Sampling of Fresh Concrete ACES Site Lab - Mesaimeer

1. Abdul Muhmin 2. Mohamed Naseer 3. Obidiako Franklin 4. Nishadh Deepal 5. Eduardo Dela Cruz 6. Aneesh Babu

710. 3.23 Concrete BS EN 12350-2 Slump Test of Fresh Concrete ACES Site Lab - Mesaimeer


711. 3.25 Concrete BS EN 12390-1 Shape, dimensions and other requirements for specimens and moulds


1. Abdul Muhmin 2. Obidiako Franklin 3. Nishadh Deepal 4. Eduardo Dela Cruz 5. Aneesh Babu

712. 3.22 Concrete BS EN 12390-2 Making and Curing of Concrete






Section Location /


713. 3.26 Concrete BS EN 12390-3 Annex B

Compressive Strength of Test Specimens- Hardened Concrete


1. Abdul Muhmin 2. Obidiako Franklin 3. Nishadh Deepal 4. Eduardo Dela Cruz 5. Aneesh Babu

714. 3.27 Concrete BS EN 12390-7 Density of Hardened Concrete


1. Abdul Muhmin2. Obidiako Franklin3. Nishadh Deepal4. Eduardo Dela Cruz5. Aneesh Babu

715. 3.28 Concrete BS EN 12504-1 Obtaining and Testing of Drilled Cores


1. Mostafa Mohamed 2. Nishadh Deepal 3. Aneesh Babu



1. Obidiako Franklin 2. Nishadh Deepal 3. Uzor Ikechukwu 4. Aneesh Babu

717. 1.8 Soil ASTM D1556/D1556M

Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method









720. 1.2 Soil ASTM D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass



721. 1.5 Soil ASTM D4318 Liquid Limit, Plastic Limit and Plasticity Index of Soil






Section Location /


722. 1.7 Soil ASTM D4718/D4718M




723. 1.3 Soil ASTM D6913/D6913M

Particle Size Distribution ACES Site Lab - Mesaimeer


ARAB CENTER FOR ENGINEERING STUDIES ACES …...(Specific Gravity), and Absorption of Fine Aggregate Street 41/Aggregate Testing Lab 1-Rex Dan Cumay -Ao 2 - Sachit Rai 3-Rommel Frando

Documents