This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
The AQxx-02HTG Series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic discharge (ESD), electrical fast transients (EFT), and lightning induced surges.
This AQxx series can safely absorb repetitive ESD strikes of ±30 kV (contact and air discharge as defined in IEC 61000-4-2) without any performance degradation. Additionally, the AQ05 can safely conduct a 33A 8/20 surge event as defined in IEC 61000-4-5 2nd Edition at low voltage clamping levels.
Features
• ESD, IEC 61000-4-2, ±30kV contact, ±30kV air
• EFT, IEC 61000-4-4, 50A (5/50ns)
• Lightning, 33A (8/20μs as defined in IEC 61000-4-5 2nd edition) for the AQ05
• Working voltages: 5V, 12V, 15V, 24V and 36V
ESD, ISO 10605, 330pF 330Ω, ±30kV contact, ±30kV air
• Low clamping voltage
• Low leakage current
• AEC-Q101 qualified
• Moisture Sensitivity Level (MSL -1)
• Halogen free, lead free and RoHS compliant
• PPAP capable
• Industrial Equipment
• Test and Medical Equipment
• Point-of-Sale Terminals
• Motor Controls
• Legacy Ports
(RS-232, RS-485)
• Security and Alarm Systems
Pinout and Functional Block Diagram
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated.
RoHS Pb GREENAQxx-02HTG Series 500W TVS Diode Array
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Absolute Maximum Ratings
Symbol Parameter Value Units
PPk Peak Pulse Power (tp=8/20μs) 500 W
TOP Operating Temperature -40 to 150 °C
TSTOR Storage Temperature -55 to 150 °C
AQ05 Electrical Characteristics (TOP=25ºC)
Parameter Symbol Test Conditions Min Typ Max Units
Reverse Standoff Voltage VRWM IR=1μA 5.0 V
Breakdown Voltage VBR IR=1mA 6.0 7.0 V
Reverse Leakage Current ILEAK VR=5V 1.0 μA
Clamp Voltage1 VC
IPP=1A, tp=8/20µs, Pin 1 or Pin 2 to Pin 3 8.0 9.8 V
IPP=10A, tp=8/20µs, Pin 1 or Pin 2 to Pin 3 10.5 13.0 V
Dynamic Resistance2 RDYN TLP, tp=100ns, Pin 1 or Pin 2 to Pin 3 0.19 Ω
Note:1 Parameter is guaranteed by design and/or component characterization. 2 Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.