This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Aquafax Limited, 14 Dencora Way, Sundon Business Park, Luton, Beds LU3 3HP Tel:(01582) 568700 Fax:(01582) 568720Aquafax Ltd. (Hamble), 1-2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO31 4RF Tel:(023) 80457206 Fax:(023) 80457208Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU Tel:(01752) 669944 Fax:(01752) 667764Aquafax Ltd. (Middlewich), Unit 11, Valley Court, Sanderson Way, Middlewich, Cheshire CW10 0GF Tel:(01606) 841111 Fax:(01606) 841188Aquafax Ltd. (Wroxham), Unit 31, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR12 8DZ Tel:(01603) 781881 Fax:(01603) 781981Marinac Scotland (Aquafax Glasgow), 103-105 Barrie Road, Hillington Park, Glasgow G52 4PX Tel: (0141) 8827511 Fax: (0141) 8835111
DISPLAY PACKAGINGAquafax offers many products packaged - either skin packedonto a display card, blister packed or bagged with a header card.All options feature a Euro slot for hanging.
HOW TO ORDERThe new part number will be the existing part number plus the letter ‘P’on the end which denotes a packaged item. i.e. 2-60101 when carded is2-60101P.A price list of these products is currently available, but we will alsoconsider any other products you would like carded and we will arrange asuitable packaging option for the product. Please state on your orderform if you want an item carded as it will cost slightly more. Also, pleaseallow an extra 24 hours for carded products.All products are bar-coded with a unique number.
We have white, revolvingdisplay stands available. These are issued free on loanwith a £600 stocking order.Blank cards stating the part for re-ordering are available on request.• Three sided revolving display• Supplied with 40 detachable
hooks• Height: 1.7m• Width: 0.7m
These packagingoptions are availablefor all sections of theAquafax catalogue.
DISPLAY STANDS
Aquafax Packaging
SECTION 1 3
DISPLAY PACKAGING
NOTE: We will also consider any other productsyou would like carded and we will arrange asuitable packaging option for the product.
1 METRE ORANGE GAS HOSE TO BS3212 (TYPE 2)Part No. Description1-59052/KP 1m Orange Gas Hose 8.0mm ID + 2x S/S Hose Clips (1-88116)1-59053/KP 1m Orange Gas Hose 10mm ID + 2x S/S Hose Clips (1-88120)
ISO 7840 A1 FUEL HOSE WITH S/S HOSE CLIPS1M Part No. Description1-57820/KP Fuel Hose 6mm ID + 2x S/S Hose Clips (1-88112)1-57821/KP Fuel Hose 8mm ID + 2x S/S Hose Clips (1-88116)1-57822/KP Fuel Hose 10mm ID + 2x S/S Hose Clips (1-88120)
10 ASSORTED COPPERWASHERSPart No. 1-19610PContains: 1 x 1⁄8" BSM (1-19600)4 x 1⁄4" BSM (1-19601)3 x 3⁄8" BSM (1-19602)2 x 1⁄2" BSM (1-19603)
10 ASSORTED BRASS COMPRESSION RINGSPart No. 1-19010PContains: 2 x 1⁄4" (1-19014)3 x 5⁄16" (1-19015)3 x 3⁄8" (1-19016)2 x 1⁄2" (1-19017)
10 ASSORTED COPPERCOMPRESSION RINGSPart No. 1-19030PContains: 2 x 1⁄4" (1-19024)3 x 5⁄16" (1-19025)3 x 3⁄8" (1-19026)2 x 1⁄2" (1-19027)
Examples of specially assembled packaged products
These packaging options areavailable for all sections of the
Aquafax catalogue.
DZR Brass & BronzeBall Valves
SECTION 14
The ISIS is a robust, dezincification resistant ball valve that is particularly suitable for thoseinstallations where high aggressive water causes causes zinc leaching in the standard brass alloysand weakens the material molecular structure.
Features:• Dezincification resistant materials• Blow-out proof stem• Full bore• Very fast opening/closing in case of emergency• No maintenance - equipped with wrapping seats
ensuring long life cycles• Antifriction ring forms the first automatic sealing
at high pressure • Two self adjusting cone shaped seals, with Teflon
sliding for second sealing at low pressure• 1 ‘O’ ring in EPDM for sealing at low pressure
and vacuum• All valves are tested according to a strict
procedure covering severe inspections on theentire production
Materials: Body & Threaded End: DZR Copper alloy CW602N (UNI EN 12165)Gland: DZR Copper alloy CW614N (UNI EN 12164)Stem: DZR Copper alloy CW602N (UNI EN 12164)Ball: Chrome Plated DZR Copper alloy CW602N (UNI EN 12164)Seals: Pure PTFE (Teflon)O-ring: EPDMLever: Zinc plated steel, PVC coated GripFixing Nut: Zinc plated steel
Why Specify DZR Copper Alloy?In certain aggressive water supplies, thedezincification of brass valves used to be aproblem. However, with the introduction ofthe ISIS Ball Valve range in dezincificationresistant copper alloy (CZ132) the use ofmore expensive alternatives can be avoided.ISIS protects against the leaching of zincthat can result in the failure of brasscomponents. Also avoided is the risk ofblockage due to the formation of a soft,white ‘meringue’ corrosion productcontaining basic-zinc carbonate.Dezincification resistant copper, alloy is nowspecified in BS EN 12165, the alloy beingdesignated CW602N (CZ132).The symbol above indicates that ISIS valveshave been manufactured to bedezincification resistant and will satisfy therequirements of the British Standarddezincification test.Dezincification resistance of CW602N(CZ132) alloy is maintained in seawater highin chlorides and other aggressive agents.Lloyds Register of Shipping Yacht andSmall Craft Department accept the use ofDZR copper alloy in through-hull fittings.
Dezincification Resistance
OTHER SIZES AVAILABLE
• FF PN32 full flow lever ball valve• Female Parallel Thread: BSP = IS07/1(BS21)• Lever handle zinc plated steel, PVC coated grip• Smaller sizes available but we recommend the
DZR ball valve above
Gas Ball Valves
SECTION 1 5
A quality Italian made, high specification ballvalve. Ideal for gas. Also suitable for hot &cold water, compressed air, pneumatic,hydraulic, and most industrial fluids.
BALL VALVES FOR GAS
Features:• Quarter turn operation• 100% full bore• Individually tested• EN 331 approved
Working Temperatures: -20°C to +60°C* * Warning: the formation of ice can severely damage valves & pipingTechnical Specifications:Male: BSP Taper Thread - ISO 7/1R BS21 DIN 2999Female: BSP Parallel Thread ISO 7/1Rp BS21 DIN 2999 (equivalentto DIN EN 10226-1 and BS EN 10226-1)Bar* - Pressure Atmosphere kg/cm3
PSI* - LBS working pressureBox* - All valves are sold & priced as each. Box quantities shown arefor information purposes.
BSP A B C D E CH Bar* PSI* Box* Part No.MALE/FEMALE TEE
1-709091-70939
MINI GAS/DIESEL BALL VALVES
Technical Specifications• Body material: forged brass nickel plated• Ball material: brass nickel/chrome plated• Body seal: Teflon PTFE• Shaft seal: nitrile 2 x NBR (max. temp + 90ºC)• Operating temperature: -20ºC to +60ºC• Max. operating pressure: 20 bar• Anti-blow out stem with 1/4 turn positive shut-off• Full bore operation - minimum pressure drop• 100% factory tested• Conforms to European Standard for Gas Valves - EN 331:1995• Also suitable for diesel
COMPRESSION x COMPRESSION OR 8MM NOZZLEA range of mini gas ball valves with integral foot mount.These valves are designed for pipe to pipe applications or hose tocopper pipe with an integral foot mount for a secure hold withoutadditional pipe supports. All come complete with nuts and brass olives.• For use with propane, butane, natural gas and diesel oil.
Compression x Compression Part No. x Hose ID Part No.
NOTE: IF INSTALLING IN A GAS SYSTEM USING COPPER PIPETHE BRASS OLIVES MUST BE EXCHANGED FOR COPPEROLIVES TO COMPLY WITH EN ISO 10239:2000 (6.2.4)Part No. Description1-19024 1⁄4" pack of 10 Copper compression olives1-19025 5⁄16" pack of 10 Copper compression olives1-19026 3⁄8" pack of 10 Copper compression olives
GAS BALL VALVES
NOTE: All valves are sold and priced as each. Boxquantities shown are just for information purposes.
Lever, Tee & L PortBall Valves
SECTION 16
Good quality Italian made full flow ball valves at competitive prices. Suitable forindustrial, pneumatic & hydraulic installations, including gasoline, fuel oils, kerosene,petrol & diesel. Ideal for hot & cold water, different oils & compressed air.• Minimum 100,000 operation design • 90 degree movement by either lever or tee handle
BALL VALVES
1-74990
1-75290
Materials:Body: Nickel plated brass CW 617NBall: Hard chrome-plated brass CW 617NStem: Brass CW 614NSeal: Pure teflon (P.T.F.E)O Rings: Viton / NBRLever handle: Red coated zinc-plated steel Fe.P04Tee handle: Red coated aluminium UNI 5076
L PORT BALL VALVESMade in nickel plated brass (CW617N), with chromed brassball (CW617N), P.T.F.E. seats and aluminium alloy handle.• ‘L’ port allows two of three ports open only. i.e. for diverting• 10 bar maximum pressure limit• For fluids from -10ºC to +100ºC• Full bore
G/BSP = Female Taper Thread ISO 7/1 (UNI EN 10226)
The direction of the flow is shown bythe marking on the lever.Position A: from Position B the handle isoperated by a clockwise quarter turn.Position B: from Position A the handle isoperated by an anticlockwise quarter turn.
Position A Position B
Working Temperatures: -20°C* to 150°C in absence of steam * Warning: the formation of ice can severely damage valves & pipingTechnical Specifications:BSP Parallel Thread - ISO 228 (equivalent to DIN EN ISO 228 & BS EN ISO 228)Bar* - Pressure Atmosphere kg/cm3
PSI* - LBS working pressureBox* - All valves are sold & priced as each. Box quantities shown are forinformation purposes.
T Port, ‘Y’ & Lever Ball Valves & Bracket
SECTION 1 7
For 1⁄4'' BSP Valves 1-74985 For 3⁄8'' BSP Valves 1-74986 For 1⁄2'' BSP Valves 1-74987
Description Part No. BALL VALVE BRACKETBrass R/Angle bracket drilled forcompression fitting, securing whenthreaded into valve, at each end.Two hole base fixing.
• Nickel plated brass body & polished Chrome ball in Brass • Teflon sealing with plasticized steel lever
1⁄2'' 3⁄8'' x 3⁄8'' 15 54 90 1-75941 3⁄4'' 1⁄2'' x 1⁄2'' 15 54 90 1-75942 1'' 3⁄4'' x 3⁄4'' 16 58 125 1-75943 11⁄4'' 1'' x 1'' 16 58 125 1-75944
PN16 T PORTBALL VALVESMade in nickel platedbrass, with chromed ball,P.T.F.E. sealing and paintedpressed steel levers.‘T’ port allows as ‘L’ port orallows all ports open.
TOTAL BALL VALVE FF TEE HANDLESuitable for: gas & water distribution, industrial & domestic heating,hydraulics, oil, steam & vacuum.• Full bore with perfect air bubble sealing• No maintenance - equipped with wrapping
seats ensuring long life cycles• Four self-adjusting cone-shaped seals,
with PTFE-PTFE sliding eliminating wear,form two sealing with automaticfunctioning
• An adjusting gland allows the sealingreset on the stem
• Quick closing gate valve• 1⁄4 Turn of a lever opens solid wedge • Suitable for oil and water • Bronze body with S/S spindle• Painted alloy lever• G/BSP* Parallel Thread: ISO 228/1
BS 2779
BSP A B C D E F Bar* PSI* Part No.
Specification Body BronzeBonnet BrassStem BrassGland & Nut BrassHandle AluminiumParallel Thread ISO 228 (BS 2779)
BSP PARALLEL THREAD ISO 228/1 (BS 2779)BSP TAPER THREAD ISO 7/1 (BS 21)
For more Brass Hose Connectors
see page 13
Bronze Pipe Fittings
SECTION 112ON THIS PAGE ALL BSP THREADS ARE:
BSP Parallel Female Thread: ISO 7/1 (BS 21)BSP Male Thread Taper: ISO 7/1 (1⁄8'' - 2'')
BSP Male Thread Parallel: ISO 228/1 (21⁄2'' - 4'')
EQUAL HEX NIPPLE• BSP Male Thread
HEX BUSH • BSP Parallel
Female Thread• BSP Taper Male Thread
3⁄8" x 1⁄4" 1-78268 1⁄2" x 1⁄4" 1-78269 1⁄2" x 3⁄8" 1-78270 3⁄4" x 1⁄4" 1-78272 3⁄4" x 3⁄8" 1-78273 3⁄4" x 1⁄2" 1-78274 1" x 3⁄8" 1-78275 1" x 1⁄2" 1-78276 1" x 3⁄4" 1-78277 11⁄4" x 3⁄4" 1-78279 11⁄4" x 1" 1-78280 11⁄2" x 3⁄4" 1-78282 11⁄2" x 1" 1-78283 11⁄2" x 11⁄4" 1-78284 2" x 11⁄4" 1-78287 2" x 11⁄2" 1-78288 21⁄2" x 2" 1-78289 3" x 21⁄2" 1-78291 4" x 3" 1-78293*
3⁄8" x 1⁄8" 1-72969 3⁄8" x 1⁄4" 1-72970 1⁄2" x 1⁄4" 1-72971 1⁄2" x 3⁄8" 1-72972 3⁄4" x 3⁄8" 1-72973 3⁄4" x 1⁄2" 1-72974 1" x 1⁄2" 1-72975 1" x 3⁄4" 1-72976 11⁄4" x 3⁄4" 1-72977 11⁄4" x 1" 1-72978 11⁄2" x 1" 1-72979 11⁄2" x 11⁄4" 1-72980 2" x 11⁄4" 1-72981 2" x 11⁄2" 1-72982
90° SWEPT BEND (MxF)• BSP Parallel Female Thread• BSP Taper Male Thread
3⁄4" 2 x 1⁄2" 1-78940 3⁄4" 3 x 1⁄2" 1-78941 1" 2 x 1⁄2" 1-78950 1" 3 x 1⁄2" 1-78951 1" 5 x 1⁄2" 1-78953 11⁄4" 2 x 1⁄2" 1-78960 11⁄4" 3 x 1⁄2" 1-78961 11⁄4" 4 x 1⁄2" 1-78962 11⁄4" 5 x 1⁄2" 1-78963
BSP Spurs Part No.
BRASS HEX BUSH• BSP Male Thread
Taper: up to 2" Parallel: over 2"• BSP Parallel Female Thread
1⁄4" x 1⁄8" 1-73170 3⁄8" x 1⁄8" 1-73175 3⁄8" x 1⁄4" 1-73180 1⁄2" x 1⁄4" 1-73190 1⁄2" x 3⁄8" 1-73200 5⁄8" x 3⁄8" 1-73204 3⁄4" x 1⁄4" 1-73206 3⁄4" x 3⁄8" 1-73208 3⁄4" x 1⁄2" 1-73210 1" x 3⁄8" 1-73215 1" x 1⁄2" 1-73220 1" x 3⁄4" 1-73230 11⁄4" x 3⁄4" 1-73240 11⁄4" x 1" 1-73250 11⁄2" x 3⁄4" 1-73255 11⁄2" x 1" 1-73260 11⁄2" x 11⁄4" 1-73270 2" x 11⁄4" 1-73275 2" x 11⁄2" 1-73280 21⁄2" x 2" 1-73290 3" x 21⁄2" 1-73295 4" x 3" 1-73297
• Black, fuel, (petrol & diesel oil) resistant NBR rubber tube• Cover is abrasion, ozone, weather, heat & oil resistant• Resistant to flame, abrasion, oil and sea conditions• Temperature range: -35ºC to +100ºC• Type A2 is mandrell wound and also features twin steel
Hose Size Working Bend NOM ID OD Pressure Radius Weight 10m Coil Long Coil Type Inch mm mm PSI BAR mm kg/mtr
Available in cut metre lengths (premium price).Add 1 in front of large coils Part No. i.e. 11-57819 and state length required.The difference between Type A1 and Type A2 is the fuel permeation rate in a test environment. Type A1 is hose tested with a permeation rate of 4g/m sq per hour or less.Type A2 is hose tested with a permeation rate of 4g/m sq per hour up to & including 12g/m sq per hr.
TITAN FUEL HOSE ASSEMBLIES BS EN ISO 7840 CLASS A1These hoses completely meet the EC Recreational Craft Directive, which is a rarity,being tested by B.S.I. and given an EC type examination certificate by Lloydsregister in order to totally comply with the regulation unlike many marketed. Inmost cases ‘TITAN’ greatly exceeded the test requirements.
Test Requirement: Titan Performance:Burst Pressure Test: 1.36 Mpa 12.5 to 17.5 MpaFire Test (about 750°C): 150 seconds 205 to 220 secondsFuel Permeation: 4g (m2h) 1.23 to 1.95 (m2h)
Specification:Special nitrile rubber inner metalbraided and then sleeved to showspecification. The ends have heavycopper extension spigots swaged inbrass with hexagon collar forsecuring when fitting to compressionfittings. 1⁄2" Size available to order.
COPPER TUBING• Annealed soft copper tubing in 10m or 30m coils• Manufactured to BS EN 12735-1:2001
NYLON TUBING - 30m• Flexible, natural colour• Suitable for pneumatic, fuel and
lubrication • Working Temperature: -10ºC to +80ºC• Sold in 30m coils*Working Pressures: values given arebased on the short-term burst pressure ofnylon at 20ºC using a safety factor of 4:1.
ALTERNATIVE COLOURS & SIZES MAY BE AVAILABLE TO ORDER
Suction & Deliveryand Clear PVC Hoses
SECTION 118
Colour: TransparentTemperature Range: -20°C to +65°CDescription: Transparent plasticizedPVC hose reinforced with high tensilesynthetic textile. Non-toxic, abrasion,ozone and weather resistant.
Applications: Gardening, irrigation, and general water discharge and lowpressure airlines. Made with FDA approved ingredients and is suitable forfood applications.
1⁄2" & 3 ⁄4" ID are available in red or blue. *To order add R or B to Part No. i.e. 1-90310R-C or 1-90310B-C
CLEAR BRAIDED PVC HOSE - 30m
1-90310B-C1-90310R-C
HOSES
Colour: Black.Temperature Range: -5°C to +60°CDescription: Strong, flexible andsmooth, plasticized PVC, shock,crush, abrasion and weather resistant.Light corrugated outside with whitenylon spiral.
Applications: For general purposes in agriculture, marine, general andbuilding industries. Suitable for deck drains, pump outlets and low suctioninlets. Conveyance of liquids, granules, dust and powder.
STANDARD SUCTION & DELIVERY HOSE - 30m
Colour: Green.Temperature Range: -5°C to +60°C Description: Strong, flexible and smoothplasticized PVC, shock and crushresistant. Light corrugated outside withshock resistant PVC spiral. Abrasion,
ozone and weather resistant smooth natural and synthetic rubber cover.Applications: For all suction and pumping applications in agriculture, marine,light chemicals, general and building industries. Conveyance of water, sludge,slurries & waste matter. Suitable for engine, bilge and deck wash pumps.
MEDIUM SUCTION & DELIVERY HOSE - 30m
Colour: ClearTemperature Range: -10°C to +60°CDescription: Strong, very flexible andsmooth transparent plasticized PVCApplications: For conveying liquids,air, light chemicals, oil, detergents and
many other liquids including potable water. Also used as suds pipes andprotection and decoration of metal tubes, wooden dowelling and yacht rigging.Under most conditions it is suitable for use with oils, greases and solvents.Made with FDA approved ingredients and is suitable for food applications.
Colour: Clear.Temperature Range: -5°C to +60°CEEC Directive: 90/138Description: Strong very flexible andsmooth non-toxic, transparentplasticized PVC with shock resistantgalvanised steel wire spiral. Abrasionand weather resistant, smooth outside.
Applications: For suction and delivery of water, mineral water, fruit juicesand liquids. Ideal for waterpump and watermaker installations.
CLEAR NON-TOXIC STEEL SPIRAL PVC HOSE - 30m
Colour: White Temp Range: -5ºC to +60ºCDescription: Strong, very flexibleand smooth, white plasticizedPVC, with shock resistantgalvanised steel spiral wire.
Applications: Suction and discharge for sanitary installation in marineand domestic use.
SANIFLEX PREMIUM PVC SANITATION HOSE - 30m
SANIFLEX PREMIUM RUBBER SANITATION HOSE - 10m or 40mColour: White Temperature Range: -35°C to +70°CDescription: Black, SBR rubber tube, reinforced with high tensile synthetic fabric. White,ozone, weather and abrasion resistant SBR rubber cover. Available in 10m and 40mApplications: Conveyance of effluent, odour free suction and discharge for sanitaryinstallations in marine and domestic use with low odour permeability.
LIGHTWEIGHT PVC DUCTING HOSE - 10mColour: GreyTemp Range: - 10°C to +60°CDescription: Extremely light and flexibleplasticized PVC with shock resistant PVCspiral. Chemical agents, abrasion andweather resistant, corrugated outside.Applications: Industrial ventilation andairflow systems, suction of duct, air,gases, powders, liquids etc.
For Heating Products & Accessories - See our Section 9 Catalogue
JCS Hose Clips & Multi-Torque Kits
SECTION 120
JCS MULTI-TORQUE KITSJCS have coupled the strength of HI-TORQUE hose clamps with theconvenience of being able to produceinstant hose clamps to any desireddiameter from a kit. MULTI-TORQUEkits are manufactured to the same highquality standards as HI-TORQUE clamps.
• Ideal for maintenance applications• All parts are 100% stainless steel (18/8 marine quality - BS 304)• Significantly stronger than other adjustable banding products.By cutting off the required lengthfrom banding roll and engagingone end into each housing onthe MULTI-TORQUE connectora hose clamp is made and it is reusable.
Multi-Torque S/S Band Connectors per 10 1-88350 Multi-Torque S/S Banding per 10m 1-88351 Multi-Torque S/S Band Kit 1m 1-88354
Description Part No.
HI-GRIP® ZINC PLATED MILD STEELHigh quality hose clips where the band threads are pressed in (rather than perforated)enhancing the thread strength and providing a smooth and snag-free band surface.• Made from heavily zinc plated mild steel • Tough construction• Manufactured to BS5315*, has BSI Kitemark and NATO approved
HI-GRIP® STAINLESS STEELHose clips are made entirely in 18/8 marine quality stainless steel and therefore areideal for salt water and other highly corrosive environments.• Lloyds Register Type Approval for marine, offshore and industrial use• High quality and performance• Industry standard for marine applications
HI-GRIP® FLEXIBLE SCREWDRIVERSpecially made screwdriver will not slip off screwhead whilst turning. The flexible shaftenables easy fitting even in awkward places. Part No. 1-88240
Size Old Size Dia.mm Dia. ins Zinc Plated S/Steel Unit
Size A B C D E F Recommended mm mm mm mm mm mm Setting Torque Nm lb-in12-20 7 14 10 12 9 0.7 3.0 2622-45 8 15 12 15 13 0.9 5.0 4550+ 13 20 12 16 13 0.9 6.0 54Material Specification:HI-GRIP: All parts - Mild Steel, Bright Zinc Plated & PassivatedHI-GRIP STAINLESS: All parts BS304 - EN1.4301
Technical Specification
* BS5315 is recognised as one of the most stringent standards for hose clips worldwide
HI-TORQUE STAINLESS STEELSpecifically designed for tough wire-reinforced hoses andwhere an extra margin of safety and reliability isrequired. Hi-Torque clamps out perform nut and bolttype clamps due to:• Higher sealing pressure due to more uniform
tightening• Offer a larger adjustment for each size• No loose parts so quicker to fit and requires less space• Unique ‘Straight Line’ housing, ensures that every thread
in the screw is fully engaged in the band• Twice the strength of ordinary worm drive hose clips due to
the high tensile banding and hardened rolled thread screw• Sold singly• Lloyds Register Type Approval for
marine, offshore and industrial use.They are specifically approved forthe critical application of sealingwet diesel exhaust hoses.
Hi-Torque Band Edges Typical hose clip withturned up edges
Dimensionsin mm
HI-TORQUE HoseClamp RatchetPart No. 1-88242
HI-TORQUE Hose ClampT Bar Screwdriver Part No. 1-88243
18/8 STAINLESS STEEL ‘P’ CLIPSMarine quality Stainless Steel clips with a TPE rubber liner • TPE rubber liner absorbs vibration, stops water seeping
into the clamped area & prevents damage to pipe or cable• Special strengthening rib keeps clips flush with the surface• TPE liner is UV and ozone resistant• Elongated upper hole to help line up the bolt when fitting• Fixing nuts and bolts not supplied• Packed in bags of 25
JCS ‘P’ CLIPS FOR PIPES, CABLES & HOSES
Dimensions in mm
Hi-Torque Band EdgesAll HI-TORQUE Stainless hose clipshave fully rounded edges to give thebest possible protection to the hose.
Material Specification:Stainless ‘P’ Clip: BS304 - EN1.4301 - 18/8 S/S Liner: TPE rubber (black) - 65 IRHD hardness Service Temp -30ºC to + 50ºC
M6 D E F Gmm 6.6 12.6 16.0 7.0
M10 D E F Gmm 10.8 20.0 23.0 12.0
M6 Dimensions M10 Dimensions
• 5 per card (5 - 32mm)add suffix /5P to Part No.
• 2 per card (32 - 60mm)add suffix /2P to Part No.
CARDED P CLIPS
Hose ClipsSold as Each
Jubilee Heavy DutyBolt Clamps
SECTION 122
JUBILEE SUPERCLAMPSUsed for demanding situations, the Jubilee Superclamp is easily adjusted by a single nut and bolt.Available in Zinc plated mild steel (yellow passivated)and 316 (A4) Stainless steel.
Min-Max Screw Band Band Max. Rec. Screw Part No. Part No. Dia. mm DIN 933 Width Thickness Tightening Head A/F Zinc S/Steel (A) mm (B) mm (C) Torque Nm* mm (D) Plated
* Maximum recommended tightening torque (Nm) figures are based on Zinc Plated Mild Steel range.
KWICK-KAM COUPLINGSKWICK-KAM COUPLINGS Polypropylene - Glass-coupled Polypropylene• A quick, simple and safe method of extending hoses• Ideal for pump out machines• BSP parallel flat seal undercut• Handles & pins are 316 Stainless Steel• Working pressure up to 8.5 Bar (125PSI)• Standard seal EPDM/Polypropylene Alloy• Interchangeable with other couplings of similar design to MIL-C-27487• Alternative sizes available to order from 3⁄4" to 4"
WORKING PRESSURESThe recommended maximum working pressures conform toBS 2051 part 1 for temperatures up to 65ºC under vibrationfree conditions. Please ensure the tube to be used is suitablefor the pressures required.
IMPERIAL PRESSURE PSI OD Inches Hydraulic Pneumatic
4 - 8 200 105 9 - 10 140 70 11 - 15 100 50
METRIC PRESSURE BAR OD mm Hydraulic Pneumatic
Size Part No.
Tube OD BSP Part No.
Tube OD BSP Part No.
Tube OD Tube ID Part No.
Tube OD Tube ID Part No. Size Part No.
Size Part No.
We normally stock either WADE® fittings or an alternative British madesupplier depending on availability.
WADE® Fittings have been manufactured and distributed for 50 years. Sosuccessful has the product been, that Wade Brass has become thegeneric term for Brass Compression Fittings for engineering purposes.WADE® Brass, which is synonymous with durability and reliability,provides a comprehensive range of fittings for both imperial and metricOD tube sizes. These are available in a full range of connecting threads.Through the adoption of a standard body, a variety of tubes of similar anddissimilar material can be connected. WADE® Fittings can be found in general use throughout the followingindustries: hydraulic, pneumatic, automotive, locomotive, LPG, oil andgas, power generation, air conditioning, heating and ventilation.
All our compression fittings are manufactured to BS 2051 Part 2 and frommaterial to all of the following standards:Bar Parts: BS EN 12164, CW609NStampings: BS EN 12164, CW617NCastings: BS EN 1982, CC491KCopper Rings: BS EN 12449, CW024A
All compression fittings are complete with nuts and annealed copper ringsas standard, for use with copper tube.
FOR PACKAGED ASSORTED COMPRESSION RINGS SEE PAGES 2 - 3
Compression Fittings
SECTION 124
STRAIGHT COUPLINGS(EQUAL & REDUCING)
MALE STUD COUPLINGSBSP PARALLEL
FEMALE STUD COUPLINGSBSP PARALLEL
1⁄8" x 1⁄8" 1-17000 1⁄8" x 1⁄4" 1-17005 3⁄16" x 1⁄8" 1-17010 3⁄16" x 1⁄4" 1-17020 3⁄16" x 3⁄8" 1-17025 1⁄4" x 1⁄8" 1-17030 1⁄4" x 1⁄4" 1-17040 1⁄4" x 3⁄8" 1-17041 1⁄4" x 1⁄2" 1-17043 5⁄16" x 1⁄8" 1-17042 5⁄16" x 1⁄4" 1-17050 5⁄16" x 3⁄8" 1-17051 5⁄16" x 1⁄2" 1-17052 3⁄8" x 1⁄4" 1-17060 3⁄8" x 3⁄8" 1-17070 3⁄8" x 1⁄2" 1-17080 1⁄2" x 3⁄8" 1-17090 1⁄2" x 1⁄2" 1-17100 3⁄4" x 3⁄4" 1-17110 1" x 1" 1-17120
4mm x 1⁄4" 1-22420 5mm x 1⁄4" 1-22416 6mm x 1⁄8" 1-22430 6mm x 1⁄4" 1-22440 8mm x 1⁄8" 1-22460 8mm x 1⁄4" 1-22470 8mm x 3⁄8" 1-22480 10mm x 1⁄4" 1-22500 10mm x 3⁄8" 1-22510 10mm x 1⁄2" 1-22520 12mm x 3⁄8" 1-22530 12mm x 1⁄2" 1-22540 15mm x 1⁄2" 1-22560
4mm x 1⁄8" 1-23710 5mm x 1⁄4" 1-23716 6mm x 1⁄4" 1-23730 6mm x 3⁄8" 1-23740 8mm x 1⁄8" 1-23750 8mm x 1⁄4" 1-23760 8mm x 3⁄8" 1-23770 8mm x 1⁄2" 1-23780 10mm x 1⁄4" 1-23790 10mm x 3⁄8" 1-23800 10mm x 1⁄2" 1-23810 12mm x 1⁄4" 1-23820 12mm x 3⁄8" 1-23830 12mm x 1⁄2" 1-23840 15mm x 1⁄2" 1-23860
4mm x 4mm 1-21510 5mm x 5mm 1-21520 6mm x 4mm 1-21530 6mm x 6mm 1-21540 8mm x 8mm 1-21570 10mm x 6mm 1-21590 10mm x 8mm 1-21600 10mm x 10mm 1-21610 12mm x 8mm 1-21640 12mm x 10mm 1-21650 12mm x 12mm 1-21660 15mm x 15mm 1-21690
1⁄8" x 1⁄8" 1-12010 3⁄16" x 1⁄8" 1-12020 3⁄16" x 3⁄16" 1-12060 1⁄4" x 1⁄8" 1-12065 1⁄4" x 3⁄16" 1-12080 1⁄4" x 1⁄4" 1-12090 5⁄16" x 3⁄16" 1-12100 5⁄16" x 1⁄4" 1-12110 5⁄16" x 5⁄16" 1-12120 3⁄8" x 3⁄16" 1-12125 3⁄8" x 1⁄4" 1-12130 3⁄8" x 5⁄16" 1-12140 3⁄8" x 3⁄8" 1-12150 1⁄2" x 1⁄4" 1-12160 1⁄2" x 5⁄16" 1-12170 1⁄2" x 3⁄8" 1-12180 1⁄2" x 1⁄2" 1-12190 5⁄8" x 1⁄2" 1-12191 5⁄8" x 5⁄8" 1-12200
1⁄8" x 1⁄8" 1-13010 3⁄16" x 1⁄8" 1-13020 3⁄16" x 1⁄4" 1-13060 3⁄16" x 3⁄8" 1-13065 1⁄4" x 1⁄8" 1-13070 1⁄4" x 1⁄4" 1-13080 1⁄4" x 3⁄8" 1-13090 1⁄4" x 1⁄2" 1-13100 5⁄16" x 1⁄8" 1-13110 5⁄16" x 1⁄4" 1-13120 5⁄16" x 3⁄8" 1-13130 5⁄16" x 1⁄2" 1-13140 3⁄8" x 1⁄4" 1-13150 3⁄8" x 3⁄8" 1-13160 3⁄8" x 1⁄2" 1-13170 1⁄2" x 1⁄4" 1-13180 1⁄2" x 3⁄8" 1-13190 1⁄2" x 1⁄2" 1-13200 5⁄8" x 1⁄2" 1-13210 3⁄4" x 3⁄4" 1-13220 1" x 1" 1-13230
Tube OD x BSP Male Part No. 1⁄8" x 1⁄8" 1-14010 1⁄8" x 1⁄4" 1-14015 3⁄16" x 1⁄8" 1-14030 3⁄16" x 1⁄4" 1-14040 1⁄4" x 1⁄8" 1-14050 1⁄4" x 1⁄4" 1-14060 1⁄4" x 3⁄8" 1-14070 1⁄4" x 1⁄2" 1-14080 5⁄16" x 1⁄8" 1-14090 5⁄16" x 1⁄8" *1-14095 5⁄16" x 1⁄4" 1-14100 5⁄16" x 1⁄4" *1-14105 5⁄16" x 3⁄8" 1-14110 5⁄16" x 1⁄2" 1-14115 3⁄8" x 1⁄8" 1-14117 3⁄8" x 1⁄4" 1-14120 3⁄8" x 3⁄8" 1-14130 3⁄8" x 1⁄2" 1-14140 1⁄2" x 1⁄4" 1-14150 1⁄2" x 3⁄8" 1-14160 1⁄2" x 1⁄2" 1-14170 5⁄8" x 1⁄2" 1-14180 3⁄4" x 3⁄4" 1-14190
Tube OD x BSP Taper Part No. Tube OD x BSP Female Part No.
Tube OD x BSP Male Part No.
BLANK NUTS
4mm x 1⁄8" 1-25210 4mm x 1⁄4" 1-25212 5mm x 1⁄4" 1-25216 6mm x 1⁄8" 1-25220 6mm x 1⁄4" 1-25230 6mm x 3⁄8" 1-25240 8mm x 1⁄4" 1-25260 8mm x 3⁄8" 1-25270 10mm x 1⁄4" 1-25280 10mm x 3⁄8" 1-25290 10mm x 1⁄2" 1-25300 12mm x 1⁄4" 1-25310 12mm x 3⁄8" 1-25320 12mm x 1⁄2" 1-25330 15mm x 3⁄8" 1-25345 15mm x 1⁄2" 1-25360
MALE STUD COUPLINGSBSP TAPER
Tube OD x BSP Taper Part No.
Tube OD x BSP Female Part No.
BSP Part No.
BSP Part No. BSP Part No.
For Imperial to Metric StraightCouplings see page 26
* FITTED WITH 5⁄16" OD FERRULE FOR NYLON TUBE
COMPRESSION FITTINGS
Compression Fittings
SECTION 1 25We also stock NPT Threaded versions of these fittings:
Male Stud Couplings Female Stud CouplingsMale Stud Elbows Screwed Plugs
EQUAL ELBOWCOUPLINGS
4mm x 4mm 1-28610 6mm x 6mm 1-28630 8mm x 8mm 1-28650 10mm x 10mm 1-28670 12mm x 12mm 1-28690 15mm x 15mm 1-28720
5mm x 1⁄8" 1-27215 6mm x 1⁄4" 1-27230 8mm x 1⁄4" 1-27240 10mm x 1⁄4" 1-27250 10mm x 3⁄8" 1-27260 10mm x 1⁄2" 1-27270 12mm x 1⁄4" 1-27280 12mm x 3⁄8" 1-27290 12mm x 1⁄2" 1-27300 15mm x 1⁄2" 1-27310
8mm x 1⁄8" 1-27815 8mm x 1⁄4" 1-27820 10mm x 1⁄4" 1-27830 10mm x 3⁄8" 1-27840 12mm x 3⁄8" 1-27860 15mm x 1⁄2" 1-27870
MALE STUD ELBOWBSP TAPER
FEMALE STUD ELBOWBSP PARALLEL
3⁄16" x 1⁄8" 1-18350 1⁄4" x 1⁄4" 1-18360 1⁄4" x 3⁄8" 1-18365 5⁄16" x 1⁄4" 1-18370 5⁄16" x 3⁄8" 1-18375 3⁄8" x 1⁄4" 1-18380 3⁄8" x 3⁄8" 1-18390 3⁄8" x 1⁄2" 1-18395 1⁄2" x 3⁄8" 1-18399 1⁄2" x 1⁄2" 1-18400
SINGLE BANJOCOUPLING• With steel bolt• Supplied with copper washers
1⁄8" x 1⁄8" 1-18010 3⁄16" x 3⁄16" 1-18030 1⁄4" x 1⁄4" 1-18050 5⁄16" x 1⁄4" 1-18060 5⁄16" x 5⁄16" 1-18070 3⁄8" x 3⁄8" 1-18100 1⁄2" x 1⁄2" 1-18110
Tube OD x Tube OD Part No.
Tube OD x Tube OD Part No. 1⁄8" x 1⁄8" 1-18500 3⁄16" x 1⁄8" 1-18510 3⁄16" x 1⁄4" 1-18515 1⁄4" x 1⁄8" 1-18520 1⁄4" x 1⁄4" 1-18530 1⁄4" x 3⁄8" 1-18535 5⁄16" x 1⁄8" 1-18540 5⁄16" x 1⁄4" 1-18550 5⁄16" x 3⁄8" 1-18555 5⁄16" x 1⁄2" 1-18556 3⁄8" x 1⁄4" 1-18560 3⁄8" x 3⁄8" 1-18570 3⁄8" x 1⁄2" 1-18580 1⁄2" x 3⁄8" 1-18590 1⁄2" x 1⁄2" 1-18600
1⁄8" x 1⁄8" x 1⁄8" 1-18810 3⁄16" x 3⁄16" x 3⁄16" 1-18830 1⁄4" x 1⁄4" x 1⁄4" 1-18860 5⁄16" x 5⁄16" x 5⁄16" 1-18930 3⁄8" x 3⁄8" x 3⁄8" 1-18980 1⁄2" x 1⁄2" x 1⁄2" 1-18990 5⁄8" x 5⁄8" x 5⁄8" 1-18991 3⁄4" x 3⁄4" x 3⁄4" 1-19000
15mm x 1⁄2" BSP 1-54215 22mm x 3⁄4" BSP 1-54222 28mm x 1" BSP 1-54228 35mm x 11⁄4" BSP 1-54235 42mm x 11⁄2" BSP 1-54242 54mm x 2" BSP 1-54254
BENT SWIVEL TAP ADAPTER• Copper x union nut
STRAIGHT COUPLING• Copper x copper
BENT COUPLING• Copper x copper
15mm x 1⁄2" BSP 1-54115 22mm x 3⁄4" BSP 1-54122 22mm x 1" BSP 1-54123 28mm x 1" BSP 1-54128 35mm x 11⁄4" BSP 1-54135 42mm x 11⁄2" BSP 1-54142 54mm x 2" BSP 1-54154
STRAIGHT COUPLING• Copper x male iron
15mm x 1⁄2" BSP 1-53415B 22mm x 3⁄4" BSP 1-53422B
BENT COUPLING• Copper x male iron
TEE WITH BRACKET• Copper x female branch 15mm x 1⁄2" BSP 1-55400
22mm x 3⁄4" 1-54722B 28mm x 1" 1-54728
PRESTEX COMPRESSION FITTINGS (TYPE A)Manufactured to EN 1254 (formerly BS864/2), Prestex ‘Type A’ compression fittings are suitable for mechanically joining copper or stainless steel tube bymeans of compressing a cone onto the tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerlyBS2871: Part 1), BS2871: Part 2, or stainless steel tube to BS4127: 1994. We normally stock the Bronze or DZR Brass Range. Where a Part No. is followed by the letter ‘B’ this indicates the material is Brass i.e. 1-52415B.
Medium Service Temp Maximum Working Pressure up to ºC BAR PSIWater or 30 16 230light mineral oils 65 10 1458 to 54mm sizes 110 6 87 120 5 75Compressed air Non-shock 30 7 1008 to 28mm sizes onlySaturated Steam 120 3 45LPG & natural gas 30 1 158 to 28mm sizes only
BENT COUPLING• Copper x female iron
COMPRESSION FITTINGS
HOSE NOZZLE ADAPTOR• With swivel nut for hose• Parallel thread
NOTE: Jointing compounds or sealants are not necessary with Prestex fittings; the use of these materialscould impair the efficiency of the joint and may contravene
local water regulations.
BENT COUPLING• Copper x female iron • 38mm (11⁄2") screw
with backnut
Gas Systems
SECTION 128
Typical LPG Installation (Propane or Butane)
1
3 4 5
8
9
9
1011
12
15
16
1. Gas Bottles 2. Double Bottle Auto Change Over Kit3. Alde Gas Leak Detector (Bubble Type) 4. Copper Tubing 5. Gas Locker Bulkhead Fitting 6. Pipe Clips (spaced at least 500mm intervals for rigid metal
piping and within 150mm of a joint)7. Plastic Sleeve or Grommet for bulkhead 8. Auto Cut Off Valve (**required if MCA approved)9. Compression Fitting10. Test Point Fitting (Tee or Elbow)11. Manual Isolation Tap 12. Flexible Gas Hose to BS 3212/213. Compression Coupling14. Appliance Fitted with FFD15. Gas Drain16. Air Vent (High level should be above
the high pressure components)
ALL PRODUCTS SHOULD BE INSTALLED BY QUALIFIED AND COMPETENT PERSONSIN ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS
GAS DRAINTO OUTSIDE
2
7
6
14
13
WARNING: Any work in gas installation should only be carried out by suitably qualified and competent persons.Attention is drawn to the Gas Safety (Installation and Use) Regulations 1998 No. 2451 (as amended) which require theinstallation of appropriate appliances, regular maintenance and testing of appliances, concerning those boats inscope. PD 5482 part 3 2005 refers to installation of LPG appliance in boats, yachts and other vessels.
GAS INSTALLATION INFORMATION
BP/CALOR GAS BOTTLE SECURING KIT
*SeeBelow
For high capacity systems it may be necessary to include a loop for testing thesystem only. The operation valve MUST be opened once a test has been completedusing the bubble tester. Bubble testers MUST be situated in a gas locker. Suitable for:
Calor bottles - 6kg & 13kgPropane or 7kg & 15kgButane. BP Gaslight - 5 kg & 10kg bottles.Meets therequirements ofBoat Safety Scheme.
Kit includes:Plastic floor andbulkhead mountbrackets and adjustableretention strap.Part No. 1-59045P
1. Unequal Branch Tee2. Mini Gas Ball Valve3. Alde Gas Leak Detector
(Bubble Type)
1
2
1
3
From gasregulator
To cabinappliances
AQUAFAX UNDERTAKES TO SUPPLY GAS APPLIANCES OR FITTINGS ON THEASSUMPTION THAT THE INSTALLER IS QUALIFIED AND COMPETENT.
HIGH LEVEL AIR VENTFROM OUTSIDE **
Gas Systems
SECTION 1 29
OR USE
AUTO CHANGEOVER KIT1-59020 (with OPSO)1-59016 (Budget)
AUTOMATIC CUT OFF VALVE• For use with either Propane or Butane • Quick acting quarter turn shut off • Must be placed in the gas line between the regulator and the appliance • Detects both loss of pressure or excess flow • Cuts off gas supply to the appliance automatically and can only be reset manually • A cut off valve of this type is suitable to comply with MCA marine guidance note for use on
fishing vessels MGN312(F).
1-59081 EN12864
1-59087
1-59089
1-59090EN12864
1-59082 EN137851-59085
1-59083 EN1949 & 12864/D
1-59091 EN13785
1-59080 EN12864
CONNECTIONS INLET PRESSURE OPERATING CAPACITY Btu/hr Part No. Gas Inlet Outlet max (bar) min mbar kg/hr kW/hr
1-59002
AQUAFAX UNDERTAKES TO SUPPLY GASAPPLIANCES OR FITTINGS ON THEASSUMPTION THAT THE INSTALLER ISQUALIFIED AND COMPETENT.
GAS REGULATORS (ALL TO BS 3016)
Changeover Kits
SECTION 1 31* OPSO = OVER PRESSURE
SHUT OFF
CHANGEOVER KITS
Kit comprises of: • One regulator• One manual changeover
valve• One thread adaptor• Two 50cm (20") W20
pigtails with highpressure black hose to BS 3212 : Type 2
• POL connectors incorporatingexcess flow and non-return valves
Capacity: 4kg (189 000 Btu/per hour) Inlet: POL Max. Inlet Pressure: 11 bar (160 p.s.i) Outlet: 3⁄8" BSP FemaleOutlet Pressure: 37 mbar (14.8”wg) Part No. 1-59015
Automatic Changeover Regulators ensure continuous gas supply to the customer. When the pressure in the supply cylinder falls, the changeoverregulator switches automatically to the reserve cylinder. The indicator arrow turns red when the system has changed over and points to the emptycylinder. The indicator turns white when turned towards the new service cylinder. OPSO = Over pressure shut off - i.e. in excess of 75mbar.
Kit comprises of: • One automatic changeover
regulator• Two 50cm (20") W20
pigtails with highpressure black hose toBS 3212: Type 2
• POL connectorsincorporating excessflow & non-return valves
• One 1⁄2" F x F shut off valve
PROPANE AUTOMATIC CHANGEOVER KIT WITH OPSO*
Capacity: 4.2kg (200,000 Btu/per hour) Inlet: POL Max. Inlet Pressure: 20 bar (294 p.s.i) Outlet: 1⁄2" BSP FemaleOutlet Pressure: 37 mbar (14.8"wg) Part No. 1-590204 Cylinder Upgrade Kit: Part No. 1-59022 (See page 32) 4 Cylinder Upgrade Kit: Part No. 1-59022 (See page 32)
4 Cylinder Upgrade Kit: Part No. 1-59022 (See page 32)
BUTANE MANUAL CHANGE OVER KITKit comprises of: • One 734 regulator• One manual changeover valve• One threaded adaptor• Two 50cm (20") W20
pigtails with high pressureblack hose to BS3212:Type 2
PROPANE AUTOMATIC CHANGE OVER KITKit comprises of: • One 924S regulator • One automatic change over valve• One Isolation valve• Two 50cm (20") W20
pigtails with high pressureblack hose to BS3212:Type 2
• POL connectorsincorporating excess flow &non return valves
Capacity: 3.2kg per hour Inlet: Union 109Max Inlet Pressure: 6 bar Outlet: 3⁄8" BSP FemaleOperating Pressure: 28 mbar Part No. 1-59018
Capacity: 6kg per hour Inlet: POLMax Inlet Pressure: 20 bar Outlet: 3⁄8" BSP FemaleOperating Pressure: 37 mbar Part No. 1-59016
Capacity: 5kg per hour Inlet: POLMax Inlet Pressure: 20 bar Outlet: 1⁄2" BSP FemaleOperating Pressure: 37 mbar Part No. 1-59017
BUDGETVERSION
WITHOPSO
The Propane Gold 776P SafetyPlus, single stage manualchangeover regulator hasenhanced safetyregulation and safetyfeatures suitable formodern high capacity gas appliances.• Features safety relief valve
protecting low pressure sideof the gas system.
• 5kg/h (69kW) capacity at 37mbar and 1⁄2" BSPF low pressure outlet.• Kit includes 2 x propane 20" flexible pigtails, regulator, manual
changeover valve, bulkhead mounting bracket and a 1⁄2" BSP lowpressure main gas isolation valve.
Part No. 1-59017
4 CYLINDER UPGRADE KIT
4 Bottle InstallationPart No. 1-59022
See page 32 for details.
Gas Equipment
SECTION 132
GAS HOSES & EQUIPMENT
• For use with manual, automatic & high pressure changeovers• Propane only• Enable upgrade from 2 to 4 cylinders
4 CYLINDER UPGRADE KIT
Part No. 1-59022Kit contains:• 2 x 30" W20 Pigtails• 2 x W20 T Pieces
LIGHT WEIGHT SPANNER• For Butane and Propane Nuts• Length: 160mmPart No. 1-59040
HEAVY WEIGHT SPANNER• For Butane and Propane Nuts• Length: 205mmPart No. 1-59041
PIGTAIL GAS HOSES TO BS 3212 (TYPE 2)• For use between gas bottle & regulator but not to exceed 17.5 Bar• Supplied complete with excess flow valves (EFV) & non-return valves (NRV)
1-59210 A Double Wall Block Propane W20 POL Connection 1-59211 B Single Wall Block Propane W20 POL Connection
Part No. Photo Description Inlet Outlet
PROPANE WALL BLOCKS• Brass body on steel mounting bracket. • Double units have non-return valve.
A B
1-59060
1-59061
1-59220
1-59221
GAS SPANNERS
AQUAFAX UNDERTAKES TO SUPPLY GASAPPLIANCES OR FITTINGS ON THEASSUMPTION THAT THE INSTALLER ISQUALIFIED AND COMPETENT.
MINI GAS/DIESEL BALL VALVES
Technical Specifications• Body material: forged brass nickel plated• Ball material: brass nickel/chrome plated• Body seal: Teflon PTFE• Shaft seal: nitrile 2 x NBR (max. temp + 90ºC)• Operating temperature: -20ºC to +60ºC• Max. operating pressure: 20 bar• Anti-blow out stem with 1/4 turn positive shut-off• Full bore operation - minimum pressure drop• 100% factory tested• Conforms to European Standard for Gas Valves - EN 331:1995• Also suitable for diesel
COMPRESSION x COMPRESSION OR 8MM NOZZLEA range of mini gas ball valves with integral foot mount.These valves are designed for pipe to pipe applications or hose tocopper pipe with an integral foot mount for a secure hold withoutadditional pipe supports. All come complete with nuts and brass olives.• For use with propane, butane, natural gas and diesel oil.
Compression x Compression Part No. x Hose ID Part No.
NOTE: IF INSTALLING IN A GAS SYSTEM USING COPPER PIPETHE BRASS OLIVES MUST BE EXCHANGED FOR COPPEROLIVES TO COMPLY WITH EN ISO 10239:2000 (6.2.4)Part No. Description1-19024 1⁄4" pack of 10 Copper compression olives1-19025 5⁄16" pack of 10 Copper compression olives1-19026 3⁄8" pack of 10 Copper compression olives
• Sealed-in long life lithium battery• 7 Year Sensor: top quality Figaro
electro-chemical sensor ensuresaccuracy and longevity
• Automatic sensor test• End of life indicator: 3 short beeps
every minute indicate end of sensor life• LCD display (CO7BD only). Displays CO concentration in parts per
million (ppm), peak CO level for preceding 12 hours andCarboxyhaemoglobin (COHb) percentage measurement
• CO alarm silence: silences alarm for up to 10 mins• Silence low battery warning chirp for up to 10 hours.
Ideal for night-time use• LED indicators for power, alarm and fault condition• Versatile mounting system allows alarm to be fixed to a surface or to
be used free-standing
Part No. 6-99077
BUBBLE GAS LEAK DETECTORThis leak detector is designed to be connected close to the outlet sideof the gas regulator. It then provides an instant visible check for leaks.Bubbles in the sightings chamber indicate a leakdownstream of the bubble tester.Supplied complete with fluid. It may be used inboats, caravans and other applications.The Boat Safety Scheme statesthat “an approved bubble tester ishighly recommended”. The bubbletester is approved by BSS.Part No. N-29001 8mmPart No. N-29002 10mm
GAS LEAKDETECTORFLUID SPRAYSolution comes in adurable plasticspray 500ml bottle.
Part No. 1-59073
CAMPINGAZADAPTER
• Butane RegulatorAdaptor
• Fits Campingaz901, 904, 907cylinders
Part No. 1-59095
Technical Specification:Dimensions (HxWxD): 90 x 60 x 30mmMax. working pressure: 2 bar (29.4psi)Capacity: 12kWPipe connections: 8mm/10mm compression inlet & outlet
Spare Fluid:N-29003 (Fluid)
GAS SAFETY
The FireHawk CO7 range battery operatedCarbon Monoxide alarm is ideal for thehome and travelling on holiday. It’scompact size takes up little room in thebaggage but gives you invaluableprotection from faulty heating andcooking appliances wherever you are.
LONG LIFE BATTERY OPERATED SMOKE ALARM(FHB10 Series)
• Auto Switch Mounting Base Plate: power automatically switched on whenalarm is installed onto mounting plate and automatically switched off whenalarm removed.
• TSE-Technology (Thermal Stability Enhancement) provides stability acrossa range of environmental conditions, reducing nuisance alarms whilstenhancing detection.
• Alarm Silence Button: ideal in non-emergency situations (nuisance alarms).• Silence ‘low battery warning chirp’ function for up to 10 hours. Maintains
continuous protection during sleeping hours.• End of alarm life indication.• LPCB approved to EN 14604: 2005
Part No. 6-99076
OPTICAL BATTERY OPERATED SMOKE ALARM(FHB1 Series)
• Battery Operated: 1 year 9 volt PP3 type battery• Approved to EN14604:2005, smoke alarm devices• Low Battery Warning: Alarm gives one beep every 40 seconds• Red LED flashes approximately every 40 seconds confirming unit is
receiving power and ready to detect fire conditions (Quiescent Mode)• Loud 85 Decibel Piezo Electric Alarm: automatically resets when
hazardous condition has passed and chamber is clear.• Test Button: Tests for sensitivity, circuitry, battery and alarm sounder.• 5 Year Guarantee: (Except Battery)
Part No. 6-99075
SMOKE ALARMS
All FireHawk Photoelectric type smokealarms are approved to EN14604-2005,the most recent and rigorous EuropeanSmoke Alarm Standard.The Photoelectric sensing chamber isparticularly sensitive to slow smouldering fires typically originating inliving rooms, bedrooms and hallways whilst being highly resistant tonuisance alarms.
The new and exciting range of optical smokealarms comes with our unique X-Profilephotoelectric chamber, controlled by bespokesoftware and featuring TSE-Technology (ThermalStability Enhancement), specifically designed toreduce nuisance alarms while maximising the detection of smoke and fire.