This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Air Products forImmediate shipment airprodsales.com
Thermally Powered VAV DiffuserRound Neck Stamped Louver Diffuser Lay-InRound Face Fixed Discharge Cone DiffuserFixed Bar Return GrilleBar Style Filter GrilleSteel Auxiliary FrameAluminum Egg-Crate GrillesLouvers, 2 inch steel
Dampers
Round Opposed Blade DamperSquare Opposed Blade DamperRound Neck Opposed Blade DamperRound Neck Adaptor Square To RoundRound to Round Pancake Adaptors
Order FormDirectory of Personnel
Quick Ship Program - pg. 2-3
QUICK SHIP PROGRAM FOR POTTORFF, ALL-LITE, DYNASONICS and AIR MANAGERS MANUFACTURED ITEMS ONLY.
2
3-Day QSP and 5-Day QSP - Quantities and Sizes
Notes: Quantities shown above are the standard maximum number of units that are available under each program for the size and model shown.The above represents general program guidelines only. Please contact the factory for special requirements.Items shown in Blue denote products or special options that are available only on the 5-Day Rush Program.For products not listed, please contact the order desk for quick ship availability.
Product Category
Fire Dampers(Static & Dynamic) Rated
Fire-Smoke Dampers
Ceiling Radiation Dampers
Air Control Dampers
Backdraft Dampers
Series
VFD-10/VFD-30
VFD-10IMVFD-10-IS/VFD-30-IS
VFD-10-TL
VFD-15R/VFD-35RVFD-15R-IS/VFD-35R-IS
FD-140/FD-340
FSD-140/FSD-140-OP
FSD-17-/FSD-170-OP
FSD-340
FSD-125RSD-140
SD-25R
CFD-15RCFD-15R-ES
CFD-15
CFD-15-ES
CFD-521/CFD-521-BTCFD-20
CFD-20-ES
CD-10RCD-10
CD-20RCD-25-RCD-40
CD-50MD-30
BD-20RBD-50BD-60
10
15155
101010
10-single sect.
10-single sect.
10-single sect.
510-single sect.
10
201020
20
101515
4020-
2015-single sect.
5-single sect.-
1520
10-single sect.
25
505015
252520
20
25
20
1520
20
502550
50
253030
10040205020
1015
406020
16 & 20 ga. A, B, or C Sleeves, Round Duct Connections,Stainless Steel, Retaining Angles
20 ga. A or B Sleeves, Round Duct Connections20 ga. A or B Sleeves, Round Duct Conn. Ret. Angles 16 & 20 ga. A or B Sleeves, Round Duct Connections,Retaining Angles16 & 20 ga. Sleeves20 ga. Sleeves20 ga. Sleeves, Round Duct Connections, Stock Actuators
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807
QUICK SHIP PROGRAMLA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807
Program Details, Schedules and Deliveries(QSP - Rush - Standard Orders)
Pottorff Air Product Sales offers three categories of order schedules that are specifically designed to meet the dynamic requirements of your customers. While orders may be placed by U.S. mail, courier mail, fax or e-mail, Pottorff Air Product Sales requests that you refrain from placing orders, especially Standard Orders, over the telephone. Please note that the inherent risk of misunderstandingverbal orders is assumed by the Buyer. Pottorff Air Product Sales takes great pride in meeting it’s scheduled ship dates. However, in the rare case that Pottorff Air Product Sales misses a RUSH or QSP ship date, Pottorff Air Product Sales will not invoice the extra RUSH or QSP charge.
24-Hour QSP - Call us for availability and pricing.
Rush Orders must be identified as “24-Hour QSP - add 35% - or $35.00 whichever is greater.
3-Day QSP - 20% extra cost - or $20 whichever is greater.3-Day QSP Orders are small to medium sized orders of specific products that can be shipped in three days from receipt of order because of their simplicity. Specific model and size information is provided in the “Quick-Ship Program.”
Orders received Before Noon PST are scheduled to ship in three working days; orders received After Noon PST are scheduled to ship in four working days. As an example, if a 3-day QSP Order is received before noon on Thursday (the 12th), then the order would be scheduled to ship on Monday (the 16th). 3-Day QSP Orders must be identified as “3-Day QSP - add 20%.”
5-Day RUSH - 15% extra cost - or - $15 whichever is greater.The 5-Day RUSH Program is designed for time critical orders and includes the majority of our product offering. Products available on aRUSH basis are listed in our “Quick-Ship Program”. There are limited finishing capabilities on RUSH orders and non-stock actuators are typically not available.
Orders received Before Noon PST are scheduled to ship in five working days; orders received AFTER NOON PST are scheduled to ship in six working days. As an example, if a 5-Day RUSH Order is received before noon on Thursday (the 12th), then the order would be scheduled to ship the following Wednesday (the 18th.) Rush orders must be identified as “5-day RUSH - add 15%.”
7-Day RUSH - 10% extra cost - or $10 whichever is greater.The 7-Day RUSH Program is designed for time critical orders and includes the majority of our product offering. Products available on aRUSH basis are listed in our “Quick-Ship Program”. There are limited finishing capabilities on RUSH orders and non-stock actuators are typically not available.
Orders received Before Noon PST are scheduled to ship in seven working days; orders received AFTER NOON PST are scheduled toship in eight working days. As an example, if a 7-Day RUSH Order is received before noon on Thursday (the 12th), then the order would be scheduled to ship the following Friday (the 19th.) Rush orders must be identified as “7-day RUSH - add 10%.”
Standard OrdersStandard Orders are scheduled for the earliest available production completion date. The schedule is our best estimate, not a guarantee, of when orders will ship and our ability to maintain schedules is typically quite good. Production lead times are approximately two to three weeks from receipt of order. Add two to three weeks to standard lead times for products requiring painted or anodized finish. Consult factory for lead-time on non-stock actuators.
Sales Order Number (SON)Upon receipt, each customer purchase order is assigned a sales order number (SON) and a scheduled shipment date. The SON allows us to track all orders and provide rapid information regarding production status, shipping information and billing details.
3
FIRE/SMOKE DAMPERS
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807
One Product - Multiple Applications• Vertical walls.• U.L. 555-S class II leakage rated.• 16" inch long, 20 gauge galvanized sleeve.• 1-1/2" hour rating for 1 or 2 hour walls & corridor ceilings.• U.L. file #R11767.• C.S.F.M file #3225-0368:110 fire rated, 3230-0368:111 leakage rated.• Optional SSPF single sided retaining angle.• All units available with optional round collars shipped loose.• Belimo low amperage, 120V electric (24V available), 7 Watts holding, 11 Watts running
(non stall type) actuator standard.• See optional available accessories.
• 1 hour rating for tunnel type corridor construction.• U.L. 555-S class II leakage rated.• 16" inch long, 20 gauge galvanized sleeve.• U.L. file #R11767.• C.S.F.M. file #3225-0368:110 fire rating, 3230-0368:111 leakage rating.• Optional SSPF single sided retaining angle or loose flange
(for use with air distribution).• Optional AR unit with collars both ends - optional AR1 unit with top collar only.
(non stall type) actuator standard.• Additional accessories also available (see accessory reference).
FSD-172 - WallApplication
Horizontal Mount
Mounting Angles
FSD-172 - CorridorCeiling Application
Smoke Detector - pg. 13
Actuators - pg. 10-11
Access Doors - pg. 14-20
SSPF Angles - pg. 6
Quick Ship Program - pg. 2-3
The Model FSD-172 is cross listed for installation in one and two hour rated walls for vertical mounting. It is also listed for installations in one hour rated tunnel corridor ceilings.
SSPF Mounting AnglesPottorff Air Product Sales’sexclusive single-side mountingangle design only requiresangles on one side of partition.The ingenious corner designallows this mounting system toinstall either underneath or ontop of the drywall offering addi-tional installation options andcost savings. Tested andapproved in accordance withU.L. standard 555 this uniquesystem is in full compliancewith all building codes for woodstud, metal stud or masonryinstallations.
• “A” style dynamic dampers stocked.• Wall style vertical mount for
1 or 2 hour walls.• 12", 20 gauge galvanized steel sleeve.• U.L. file #R11767.• C.S.F.M. file #3225-368:101.• Optional SSPF picture frame angles.• Optional AR or AR1 units come with
round collar(s) loose.VFD-10-D-ISVertical Mount
(Model - VFD-10D-ISAR shown above.Optional round duct connection is a U.L.
approved breakaway connection.)
Accessory Reference
6" x 6"8" x 8"
10" x 10"12" x 12"14" x 14"16" x 16"18" x 18"20" x 20"22" x 22"24" x 24"
Size Stock# List PriceFIRE/SMOKE DAMPERS AND FIRE DAMPERSSQUARE-TO-ROUND ADAPTORS
• The Fire/Smoke Dampers and Fire Dampers Square-to-Round Caps will not fit on the Ceiling Radiation Dampers.
SSPF Angle - pg. 6
5
Mounting AnglesSingle Mounting Angle
Over Drywall
Single Mounting AngleUNDER Drywall
* Metal Stud Only
MetalStud
MetalStud Damper
SleeveDamper Sleeve
4-3/8" (111) Std.
3-1/4" (83) Std.
• Ceiling radiation damper• For use in floor-ceiling and
roof-ceiling assemblies.• 22 gauge galvanized steel construction.• U.L. file no. 3225-368:104.• Stocked with extended sleeve.• CRB-24 24" x 24" radiation
blankets for use in T-bar ceiling.• CRB-125 is 24" x 125’ of radiation
blanket material for custom sizing.
Ceiling radiation dampers are for use in floor-ceiling and roof-ceiling assemblies. They are constructed of 22 gauge galvanized steel andare stocked with an extended sleeve.
Optional round duct transition on top Quick Ship Program - pg. 2-3
CONTROL DAMPERS• Single and opposed blade action available.• 6" x 16 gauge galvanized steel blades.• 1/2" dia. hex plated steel blade shafts.• In-jamb linkage.• Standard nylon bushings.• 1/2" round x 6" drive axle with bearing.• Dampers supplied 1/4" undersized.• Optional electric and pneumatic actuators
in stock (see accessory reference.)• Optional manual locking quadrant
(see accessory reference.)
• 6" x 22 gauge sleeve and frame, doublebeaded for strength.
• Easy duct connection.• 22 gauge galvanized blade with center “V”.• 3/8" square zinc plated shafts with tight
sealing nylon bushings.• Manual locking quadrant standard with
1-1/2" stand-off bracket.• No rattles.
• 12" x 20” gauge galvanized steel sleeve.• Double beaded for strength and easy duct connection.• Double membrane steel blade (14 ga. equivalent).• Polyethylene blade gasket provides full diameter seal.• 1/2" round diameter steel blade shafts.• Leakage less than 1% at 2" of static pressure.• Maintains seal at 4" of static pressure.• Optional electric and pneumatic actuators in stock.• Optional manual locking quadrant
(see accessory reference.)
6" x 6"8" x 8"
10" x 10"12" x 12"14" x 14"16" x 16"18" x 18"20" x 20"22" x 22"24" x 24"
• Aluminum tie bar interconnects all blades for increased stability at higher velocities up to 1250 fpm.
• Blade edge open cell neoprene gaskets reduce leakage and noise.
• Units supplied approximately 1/4" under nominal duct dimension.
The BD-50 is constructed with 2" X 1/2" X .060extruded aluminum channel frame and 24 gaugeformed aluminum blades. They feature nylonbushings and blade axles. They are constructedfor vertical mounting and horizontal upflow.
• Neoprene closed cell gaskets around frame.• Designed for low air flow gravity and fan usage
less than 600 FPM.
The BDR is constructed with 20 gauge steel frame andsleeve with aluminum spring loaded blades. They areconstructed for vertical mounting and horizontal upflow.
2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return
Catalog# Model# Max.Sq.Ft. Pressure Power Description List$W-10547
W-10548
331-4826
331-2998
4
12
8 - 13 PSI
8 -13 PSI
Pneumatic
Pneumatic
The No. 3 Pneumatic DamperActuator is a Compact,
Modular, Totally Enclosed,Rolling Diaphragm-TypeActuator Designed for
Modulating or Two PositionActuation.
The No. 3 Pneumatic DamperActuator is a Compact,
Modular, Totally Enclosed,Rolling Diaphragm-TypeActuator Designed for
Modulating or Two PositionActuation.
$211.00
$335.00
Aux. SwitchNoYesNoYesNoYesNoYes
Aux. SwitchNo
No
10
The type FSNF and FSLF spring-return actuators are intended for the operation of smoke and com-bination fire and smoke dampers in ventilation and air-conditioning systems. The actuator will meetrequirements of UL555 and UL555S when tested as an assembly with the damper and will meetrequirements of UBC for 15 second opening and closing at 3500F.
Square footage of damper operated will depend on make and model and the temperature required.
The 331-4826 Pneumatic Damper Actuator is a compact, modular,totally enclosed, rolling diaphragm-type actuator designed for mod-ulating or two position actuation. Typical applications are for controland fire/smoke leakage rated dampers or air valves.
The 331-2998 Pneumatic Actuator Damper Actuator is a totallyenclosed, pneumatic piston type actuator designed to operatedampers for ventilating systems, mixing box control, and otherapplications requiring a large effective diaphragm area and long stroke.
ACTUATORS
ELECTRIC ACTUATORS - 2 POSITION SPRING RETURN - FOR USE WITH AIR CONTROL DAMPERS
BELIMO
LF
NF/AF
Catalog# Model# Max.Sq.Ft. Voltage Power Description List$W-10554W-12002W-10555W-12005W-10550W-12000W-10551W-12003W-10552W-12001W-10553W-12004W-12449W-12451W-12450W-12452
2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return
For position control, fail-safe control of dampers in HVAC systems. Control is positional from an auxiliary contact, or a manual switch.These actuators provide true spring return operation for reliable application and positive close off on airtight dampers. The springreturn system provides constant torque to the damper with, and without, power applied to the actuator.
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807
Catalog# Model# Spring Range Description List$W-10562W-10547W-10548
MCP-3631-3000331-4826331-2998
5-10 PSI8-13 PSI8-13 PSI
Pneumatic, Proportional or 2 PositionPneumatic, Proportional or 2 PositionPneumatic, Proportional or 2 Position
$175.00$211.00$335.00
12
The 331-4826 Pneumatic Damper Actuator is a compact, modular,totally enclosed, rolling diaphragm-type actuator designed for mod-ulating or two position actuation. Typical applications are for controland fire/smoke leakage rated dampers or air valves.
• Fixed or pivot mounting models.• Position relay available as an option.• Variety of mounting/linkage kits to fit any application.• Threaded shaft for easy mounting of accessory items.
shutdown (up to ten air handlers).• Patented cover tamper trouble signal.• Easy to clean.• 24 VAC/DC or 120/240 VAC operation.• High-Low voltage barrier.• UL 268A listed.
• Remote test station option.• Air velocity rating from 100 to 4000
FPM.• Equipped with two DPDT form C relay
contacts.• Easy & quick mounting to round or
rectangular duct from 1’ - 12’ wide.• Textured cover for convenient visual
inspection.• 3 year warranty
DH100ACDCLP
• Low profile smoke detector design.• Low standby current.• Two LED’s “blink” in stand by.• Detector head plugs easily into base.• Built-in test switch.• Built-in tamper-resistant feature.
• Air velocity rating 0 to 3000 FPM.• 120VAC base with built-in shorting spring.• Designed for mounting on standard
electrical box.• SEM screws for easy wiring and positive
wire retention.• Removable cover and insect screen for
field cleaning.• UL 268A listed.
2151
SYSTEM SENSOR 2151 LOW VELOCITY PHOTOELECTRIC (NO FLOW/LOW FLOW) DUCT DETECTOR
SMOKE DETECTOR BASE UNIT
SAMPLING TUBE FOR ABOVE DETECTOR
B114LP• UL 2075• 12/24 VDC• Wall or ceiling mounted.• Code required trouble relay.• Electro Chemical sensing.
Accessory ReferenceRTS451 RemoteTest StationRequired to be used with
2151 detector for in-ductinstallations. Also workswith DH100ACDCLP
Stainless Steel isalso available - Call for Pricing
16 Gauge GalvanizedSteel Frame
STOCK DRYWALL ACCESS DOORS
TM - GENERAL PURPOSE INTERIOR ACCESS DOOR
• For Masonry, tile, and wallboard.• 16 gauge door, 16 ga. frame.• Screwdriver operated cam locks.• Steel construction.• Phosphate dipped with gray prime coat.• Concealed hinge on long dimension.• Cut opening 3/8" larger than nominal.*• Custom sizes and colors also available - Just Ask Us!!!• Can be ordered with Keylock option.
• 1 or 3 Hour U.L. “B” Label wall rating.• Warnock Hersey 1 or 3 hour floor/ceiling rating.• 2" thick, 20 gauge door, 16 gauge frame.• Self closing, spring-assisted.• Stocked with flush key hole. Recessed Universal latch for
turning and key lock included.• Concealed hinge on long dimension.• Phosphate dipped with gray prime coat.• Cut opening 3/8" larger for walls.• Frame opening 1-5/8" larger for ceilings and line opening
with 5/8" “X” gypsum board.• Please also see FDSS stainless steel and FDWB for tape
and mud applications.• Custom sizes and colors also available - Just Ask Us!!!
• For construction and installation information on the above access doors please contact customer service.
Custom sizes and colors available.
Just Ask Us !!!
We also handle the following relateditems for your project:
• Heavy Duty Floor Vents• Smoke Vents• Equipment Hatches• Metal Building Curbs• Gravity Ventilator Skylights• Dome Style Skylights• Fire Extinguisher Cabinets
The HAD-P Hinged Insulated Duct Access Door features galvanized steel constructionand high density closed cell gasketing from the door to the frame only. Features 1"high density fiberglass insulation.
RAD - ROUND DUCT NON-INSULATED DUCT ACCESS DOOR
RAD Catalog# Size List$W-11515W-11516W-11517W-11518W-11519W-11520W-11521
• 1/4" thick neoprene gasket door to duct.• Zinc plated continuous steel hinge.• Two draw-tight sash locks.• Loose striker plates for field installation.
The RAD Round Duct Non-Insulated Duct Access Door is a 20 gauge galvanized steelroll-formed door panel which features zinc plated hardware.
18" X 36"18" X 48"24" X 36"24" X 48"24" X 60"24" X 66"24" X 72"
$232.00$248.00$205.00$221.00$252.00$263.00$289.00
20
WAD
• 1" fiberglass insulation.• Full length zinc plated continuous vertical
hinge.• Two Ventlock 202 door latches with interior
and exterior handles.• Hole size is nominal.
The WAD Walk-In Insulated Access Door features a 16gauge galvanized steel frame and 22 gauge galvanizedsteel double-wall door.
Opening DimensionW-2”(51)
Opening Dimension H-2” (51)
Hinge
Insulation
"Z" Flange
Gasket
Handle
1-1/4"
Latch
1"
STOCK ROOF HATCHES
SINGLE DUCT TERMINAL UNITS*
1" (25mm) FIBERGLASS INSULATION
14 ga. (1.9mm) GALVANIZED STEEL COVER
COMPRESSION CYLINDER TPE CONTINUOUS
HATCH SEAL
22 ga. (.8mm) GALVANIZED STEEL LINER
RED VINYL GRIP
14 ga. (1.9mm) GALVANIZED STEEL CURB FRAME
ROOFING BY OTHERS
12"(305mm)
WIDTH
1" (25mm) FIBERBOARD INSULATION
*Aluminum Roof HatchAvailable by Request.
Other sizes and colors available. Call for information.
RHG-1 GALVANIZED ROOF HATCHES
RHG-1
Catalog# Size List$W-10091 30" X 36" $1,195.00
STEEL ROOF HATCHES*
• 14 gauge galvanized steel curb, 12" highwith 4" wide flange including holes for securing to roof deck.
• Curb includes integral, rounded corner, andcounter flashing.
• EPDM draft seal gasket.• Heavy gauge automatic hold open arm with
red grip for opening and closing.• Exterior latch handle with integral padlock
hasp, inside locking handle with interiorpadlock hasp.
• ARI Certified sound performance.• Heavy gauge steel construction.• Low leakage damper design.• Thermally insulated inlet tube.• Acoustically and thermally insulated casing
meets UL181 and NFPA 90A requirements.• Slip and drive discharge connection.• Damper position indicator mark.• Electronic controls available.• Patented Flo-Cross Multipoint Flo-Sensor.
Pricing on next page
* We can strap two boxes together to make a dual box.
The RHG-1 Roof Hatch features a 14 gauge galvanized steel cover with a 22 gauge galvanized steel liner with a Hammertone powder coat gray finish and standard heavyduty hinge. 1” fiberboard insulation surrounds the base and there is 1” fiberglass insulation between the exterior door cover and liner. This roof hatch is compression operated with a shock absorbing cylinder for safe closure.
21
Unit CFM Range Length Height Width Inlet DimensionSize Min to Max (L) (H) (W) (D)
Model SDV Pneumatic Controls• Pressure independent.• Pneumatic actuator.• Control enclosure included.• Damper position indicator on shaft.• Multifunction controller.• DA-NO/NC or RA-NO/NC.• Field calibration required.
Model SDV No Controls• Unit stocked less controls.• Control enclosure included.• Flo-Cross Multipoint Flo-Sensor.• 3/8” bare damper shaft.
SDV Dimensional Data
SDV
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807
SINGLE DUCT TERMINAL UNITS
OPTIONAL HOT WATER COILS 1 ROW AND 2 ROW
OPTIONAL STOCK 3 FOOT ATTENUATORS
SINGLE DUCT TERMINALUNITS, NO CONTROLS
• Copper tubing-aluminum fins.• Housed in galvanized casing.• Coil mounts at discharge outlet.• Slip and drive duct connection.• Coil ships loose.• Optional mounting available.
• 1 insulation, open both ends.• S and D drive connections.
22
Size H W L A B C D L A B C D
68
1012141624
8”10
12-1/215
17-1/21818
12121416202438
5555
7-1/27-1/2
5
00
1-1/41-1/41-1/41-1/41-1/4
6-1/48-3/410-7/813-3/815-7/815-7/815-7/8
33
4-1/44-1/44-1/44-1/44-1/4
1/21/27/87/87/87/87/8
01-1/81-1/81-1/81-1/81-1/81-1/8
6-7/89
11-1/214
16-1/216-1/216-1/2
4-1/44-1/44-1/44-1/44-1/44-1/44-1/4
7/87/87/87/87/87/87/8
5555
7-1/27-1/2
5
1 Row 2 Row
We can solder Water ControlValves on for free if desired.
48" x 1 Slot x 3/4"60" x 1 Slot x 3/4"72" x 1 Slot x 3/4"48" x 2 Slot x 3/4"60" x 2 Slot x 3/4"72" x 2 Slot x 3/4"48" x 1 Slot x 1"60" x 1 Slot x 1"72" x 1 Slot x 1"48" x 2 Slot x 1"60" x 2 Slot x 1"72" x 2 Slot x 1"
• Air Managers Linear Slot Diffusers• Fully adjustable horizontal pattern controller in stock• 1 slot and 2 slot, 3/4" or 1" slot widths stocked.• Excellent VAV applications• Can be field cut to custom lengths
• Air Managers insulated linear plenum boot.• Matching fit for stock linear slot diffusers.• Galvanized steel construction.• Stocked in 48", 60" and 72" lengths.
Diffuser Plenums are designed for single diffusers or continuous runsand can be used for supply or returnapplications. They are available withan Inlet collar round up to 8" and flatoval up to 14".
Linear Slot Diffusers feature aluminum construction with endcaps or butt caps. They arestocked in a bright White finishwith black pattern controller.
LINEAR SLOT DIFFUSERS FROM STOCK OR LOCALLY CUSTOM MADE
48" x 1 Slot x 3/4"60" x 1 Slot x 3/4"72" x 1 Slot x 3/4"48" x 2 Slot x 3/4"60" x 2 Slot x 3/4"72" x 2 Slot x 3/4"48" x 1 Slot x 1"60" x 1 Slot x 1"72" x 1 Slot x 1"48" x 2 Slot x 1"60" x 2 Slot x 1"72" x 2 Slot x 1"
48" x 1 Slot x 3/4"60" x 1 Slot x 3/4"72" x 1 Slot x 3/4"48" x 2 Slot x 3/4"60" x 2 Slot x 3/4"72" x 2 Slot x 3/4"48" x 1 Slot x 1"60" x 1 Slot x 1"72" x 1 Slot x 1"48" x 2 Slot x 1"60" x 2 Slot x 1"72" x 2 Slot x 1"
1/2 INCH INTERNALINSULATIONMEETS NFPA 90A AND 90B,SMACNA AND ASTM C 1071,TYPE 1
PLENUM MATERIAL: 24 GAUGEGALVANIZED STEEL
45 DEGREE TURN
VARIES1/2” MIN.
13” on 3/4”_
2”14” on 2-1/2” & 3”
DUCT WIDTH
CEILINGOPENINGWIDTH
2-1/2” on 3/4”_
2” SLOT4” on 2-1/2” & 3” SLOT
VARIES
INLETDAMPER(OPTIONAL)
2-1/2"
1-1/8" 3/4"
2-1/2"
5/8"
3/8" 7/8"
Concealed mounting with hemmed plenumLTSC Frame
Concealed mounting in hard surfacesMCS Frame
Inlet collar round up to 8"Flat oval up to 14".
PERFORATED LAY-IN DIFFUSERS
PERFORATED ADJUSTABLE CURVED BLADE LAY-IN T-BAR AND MATCHING RETURN
25
• Tuttle and Bailey curved blade perforated diffuser.• Round or square neck.• Unit is standard with adjustable curved blade core in neck.• Adjustable horizontal to vertical air pattern.• Diffuser stocked as 4 way blow pattern standard.• 24" x 24" lay-in ceiling module with removable perforated face.• White baked enamel finish.
Catalog# Size Max CFM @ NC List$W-10213W-10214W-10215W-10216W-10217W-10218W-10220W-10221W-10222W-10223W-10244W-10225
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-080726
PERFORATED LAY-IN DIFFUSERS
PERFORATED FACE MODULAR CORE LAY-IN T-BAR AND MATCHING RETURN
• Tuttle and Bailey modular core perforated diffuser.• Square neck.• Removable modular core design.• Diffuser is adjustable to any blow pattern.• Diffuser stocked with cores set at 4 way blow standard.• 24" x 24" lay-in ceiling module with removable perforated face.• White baked enamel finish.
Catalog# Size Max CFM @ NC List$W-10227W-10228W-10229W-10230W-10231W-10232W-10233
PERFORATED LAY-IN DIFFUSERSPERFORATED FACE MOUNTED ADJUSTABLE AIR PATTERN LAY-IN T-BAR AND MATCHING RETURN
PERFORATED LAY-IN SCREENS
PERFORATED FACE LAY-IN T-BAR SCREENS
• Tuttle and Bailey economy perforated diffuser.• Round or square neck.• Unit is standard with face mounted adjustable air pattern.• Diffuser is field adjustable to any blow pattern.• Diffuser stocked with 4 way blow pattern preset.• 24" x 24" lay-in ceiling module with removable perforated face.• White baked enamel finish.
• Matching steel perforated, non-ducted.• White baked enamel finish.
Catalog# Size Max CFM @ NC List$W-12282W-12283W-12284W-12285W-12286W-12287W-10241W-10242W-10243W-10244W-10245W-10246W-10247
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-080728
PERFORATED SURFACE MOUNTPERFORATED FACE SURFACE MOUNT SUPPLY AND RETURN
• Flat frame construction with screw holes.• Square neck with removable perforated face.• Basic curved blade perforated diffuser.• Diffuser stocked as 4 way blow pattern standard.• White baked enamel finish.
• Flat frame construction with screw holes.• Square neck with removable perforated face.• White baked enamel finish.
• Square neck.• Each individual core can be removed and rotated to provide
the required air pattern.• T-bar lay-in and surface mount units stocked.• White baked enamel finish.
Tuttle and Bailey lay-in plaque diffusers feature a roundneck connection and a choice of six round neck sizes.The all stamped process means no miter lines orunsightly fasteners.
• Diffuser model is 24" square.• May be used for supply or return.• 1-1/4" collar for easy duct connection.• White baked enamel finish.• Removable plaque face.
SQD-LT
T-1100
SQD-SB
SQD-LT, MODULAR CORE, 24 x 24 LAY-IN PANEL
SQD-SB, MODULAR CORE, BEVELED FRAME, SURFACE MOUNT
Catalog# Size Max CFM @ NC List$W-10122W-10123W-10124W-10125W-10126W-10127W-10128W-10129W-10130W-12599
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-080730
LOUVERED FACE CEILING DIFFUSERS - Lay-in and Surface MountLOUVERED FACE LAY-IN AND SURFACE MOUNT DIFFUSER
CURVED BLADE CEILING DIFFUSERS - Surface and Exposed Mount
CURVED BLADE SURFACE MOUNT CEILING DIFFUSERS
• Tuttle and Bailey louvered face diffuser.• Square neck sizes stocked in 3" increments.• 4-way fixed air pattern stocked.• Surface mount ceiling opening is duct plus 1".• Inner assembly spring loaded and removable.
• Excellent for vav and cold air devices.• White baked enamel finish.• Removable core.• Surface mount is beveled frame.
• TRU AIRE adjustable curved blade ceiling diffuser.• Also designed for low sidewall, high sidewall applications.• White baked enamel finish.• Curved Blade Surface Mount Ceiling Diffusers feature a 4 way fixed
discharge pattern• Excellent for vav and cold air devices.
Catalog# Size Max CFM @ NC List$W-10208W-10209W-10210W-10211W-12600W-12394
6"x6"9"x9"
12"x12"15"x15"18"x18"21"x21"
225@34506@37900@371406@402025@412756@42
$84.00$89.00$116.00$147.00$177.00$205.00
M-LT M-SB
M-LT, LOUVERED FACE DIFFUSER, 24" x 24" LAY-IN PANEL M-SB, LOUVERED FACE DIFFUSER, 24" x 24", SURFACEMOUNT, BEVELED FRAME
Catalog# Size Max CFM @ NC List$W-10201W-10202W-10203W-10204W-10205W-12601
www.rickardus.comThese drawings do not detail every aspect of the product. This submittal demonstrates general product dimensions; drawings are not to scale.
www.rickardus.comThese drawings do not detail every aspect of the product. This submittal demonstrates general product dimensions; drawings are not to scale.
Notes:* - For Relief Rings, also see submittal RADUS05
Dimensions in inches
NR
9/16
5/16
24
PL
Spline hardwareby others
3/8
243/8
YM
Mounting hardwareby others
13/16
24
SF**
** For SF applications, a separate trim frame ships with a LT diffuser
24 3/8Ceiling Opening
25 1/4
LT 23 3/4
Cooling Setpoint Adjustment
Heating Offset Adjustment
Minimum Airflow Adjustment
Neck - 1/8 *
18 1/4
2 1/2
1 3/8 for sizes 10 & 12
1 1/8 for size 61 1/4 for size 8
7 1/4
• Thermally Actuated using Wax Bulb Technology.• 10 Yr. Replacement Parts Warranty.• No Electrical Requirements. • No Tools Needed to Set Temperature Setpoints.• Reversing Changeover.• No Routine Maintenance Required.• Self Contained • ARI Certified.
• Excellent performance for both vav and cold air devices.• Choice of six round neck sizes.• Diffuser module is 24" square.• 1-1/4" collar for easy duct connection.• White baked enamel finish.• Earthquake tabs standard.
Tuttle and Bailey high volume 2 cone louvered face diffuser is constructed with a stamped process which features no miter lines or unsightly fasteners. The anti-streak, anti-smudge design keeps your ceiling clean.
1200
• Tuttle and Bailey round face high capacity diffuser.• Heavy gauge steel construction.• Core is easily removed for installation or maintenance.• Stocked in 2" increments.• Two horizontal discharge settings.• Center button is removable for access to damper.• White baked enamel finish.
P3
1200, ROUND NECK 2-CONE LOUVERED FACE DIFFUSER, LAY-IN
Catalog# Size Max CFM @ NC List$W-10195W-10196W-10197W-10198W-10199W-10200
6"8"10"12"14"15"
216@29384@33600@36864@391069@381227@38
$71.00$71.00$71.00$71.00$71.00$71.00
P3, THREE CONE ROUND CEILING DIFFUSER
Catalog# Size Max CFM @ NC POS1.2 List$W-10187W-10188W-10189W-10190W-10191W-10192W-10193W-12606W-12650
ROUND FACE FIXED DISCHARGE CONE DIFFUSERHIGH CAPACITY ROUND FACE DIFFUSER - Exposed or Surface Mount
— 16 —CD-1 05/06 — 16 —
PRODUCT DIMENSIONSS1200, A1200 Series Fixed Pattern
Frame Details: SF, LT, PL & NR
eludoM 42x42eludoM 21x21
DIMENSIONS IN INCHES
*Surface mount frame style includes an aluminum trimframe for installation
Nom.DuctSize(in.)
Steel &Aluminum
A
SeriesSteel
B
SeriesAluminum
B6 5-7/8 1-1/2 28 7-7/8 1-1/2 2
Nom.DuctSize(in.)
Steel &Aluminum
A
SeriesSteel
B
SeriesAluminum
B
6 5-7/8 1 2
8 7-7/8 1 2
10 9-7/8 1-1/2 2
12 11-7/8 1-1/2 2
14 13-7/8 1-1/2 2
15 14-7/8 1-1/2 2
1200 Series 1200 A1200 1200 Series 1200 A1200
CD
Ste
pd
ow
n 2
-Co
ne
Sq
uar
e/R
ou
nd
Dif
fuse
rs
07/06
42437_Final Text 7/18/06 2:13 PM Page 172
PRODUCT DIMENSIONSP3, AP3 Series
— 104 —CD-1 05/06
Model P3, AP3
Adjustment of P3 &AP3, is achieved byremoving the two innercores as one unit andrepositioning sixscrews. Spring lockholds inner core unit inplace and allows foreasy removal &replacement.
Note: At position 1, maximum capacity is obtained. At position 2, induction is increased.
P3 AP3
DIMENSIONS IN INCHES
Nominal RoundDuct Size
DB C
E(Position 1)
E(Position 2)
06 6-1/2 11-1/8 1-3/4 1-1/8
08 8-1/2 14-3/4 2-1/8 1-1/2
10 10-1/2 18-1/4 2-7/8 2-1/8
12 12-1/2 22 3-1/8 2-3/8
14 14-1/2 26 3-3/8 2-5/8
16 16-1/2 29 4 3-1/4
18 18-1/2 32-1/2 4-3/4 3-7/8
Nominal RoundDuct Size
DB C
E(Position 1)
E(Position 2)
06 6-1/2 11-1/8 1-3/4 1-1/8
08 8-1/2 14-3/4 2-1/8 1-1/2
10 10-1/2 18-1/4 2-7/8 2-1/8
12 12-1/2 22 3-1/8 2-3/8
14 14-1/2 26 3-3/8 2-5/8
16 16-1/2 29 4 3-1/4
18 18-1/2 32-1/2 4-3/4 3-7/8
20 20-1/2 36 5-7/8 4-7/8
24 24-1/2 43-1/4 7-3/4 6-5/8
30 30-1/2 53-3/4 8-1/8 6-5/8
36 36-1/2 64-1/2 10-1/8 8-3/8
CD
Ro
un
d 3
-Co
ne
Sq
uar
e/R
ou
nd
Dif
fuse
rs
07/06
42437_Final Text 7/18/06 2:14 PM Page 260
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-080732
STATIONARY RETURN GRILLESTEEL BAR STYLE RETURN GRILLE - EXPOSED OR SIDEWALL SURFACE MOUNT
• Steel adjustable vertical face bars and horizontalback bars on 3/4" center.
• 1-14" flat border frame with screw holes.• Countersunk screw holes and mounting
screws included.• Polyurethane foam gasket
included on frame.• Steel OBD damper included.• White baked enamel finish.
T64, DOUBLE DEFLECTION BAR TYPE SUPPLY GRILLE W/OBD
— 7 — 05/06 RG-1
PRODUCT DIMENSIONST54, T64
DIMENSIONS IN INCHES
— 7 — 05/06 RG-1
PRODUCT DIMENSIONST54, T64
DIMENSIONS IN INCHES
Steel S
up
ply
Grilles &
Reg
isters
07/06
42437_Final Text 7/18/06 2:12 PM Page 7
— 7 — 05/06 RG-1
PRODUCT DIMENSIONST54, T64
DIMENSIONS IN INCHES
— 7 — 05/06 RG-1
PRODUCT DIMENSIONST54, T64
DIMENSIONS IN INCHES
Steel S
up
ply
Grilles &
Reg
isters
07/06
42437_Final Text 7/18/06 2:12 PM Page 7
STEEL AUXILIARY MOUNTING FRAME - Conversion From T-Bar to SurfaceMODEL SMF 24" x 24"
• Enables fast and efficient installation of a T-Bar diffuser or grille in a hard or plaster ceiling.
• Easy and simple installation.• Allows easy access to ceiling plenum space.• Wide flange provides a clean look.• White baked enamel finish.• Mounting hardware included.• Recommended ceiling opening is module size plus 1/4".
SMF
STEEL SUPPLY REGISTER - EXPOSED OR SIDEWALL SURFACE MOUNT
Catalog# List$W-11375 $41.00
LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-080734
ALUMINUM EGG-CRATE RETURN GRILLE - Lay-In and Surface MountMODEL CRE5OO-LT AND CRE5OO-SF SURFACE MOUNT
• Aluminum cube core 1/2" x 1/2" x 1/2".• Aluminum 1-1/4" flat frame with screw holes.• T-bar units stocked with 24" x 24" panels.• Furnished with countersunk screw holes and
mounting screws for surface mount units.• White baked enamel finish.