April 2013 Wire Rope Exchange

MARCH - APRIL 2013

HIGHS AND LOWS OF SHIPPING ON THE MISSISSIPPI RIVER

INTERNATIONAL SALES MAGAZINE

SALVAGING THE COSTA CONCORDIA

BAY BRIDGE NEARS COMPLETION

MARCH - APRIL 2013INTERNATIONAL SALES MAGAZINE

8-1/8” (8.125”) Trim

8-3/8” (8.375”) Bleed

11-1/8”(11.125”)

Bleed

10-7/8”(10.875”)

Trim

ATTN: Rick ColvinPH: 707.748.1700 FAX: [email protected]

Please fax back approval

� Approved

Client Signature

� Please make noted changesand fax back for my approval

4736LDMad03r13WRXPub: Wire Rope Exchange

2804 Foster AveNashville, TN 372101-800-643-5189Erik Von Colln (Printer)[email protected]

Client: Rick ColvinLandmann Wire Rope Products6500 Goodyear Rd.Benicia, CA 94510800-331-0794/ph707-748-1701/fax

Design: Garson Design Services239 Concord AvenueFairfield, CA 94533707 428-1743/phone707 428-3652/[email protected]

Issue1: Nov-Dec of Each YearDeadl: 11/12/11-FriIssue2: Jan-Feb of Each YearDeadl: 01/16/12-MonIssue3: Mar-Apr of Each YearDeadl: 03/15/12-ThuIssue4: May-June of Each YearDeadl: 05/16/12-WedIssue5: July-Aug of Each YearDeadl: 07/16/12-MonIssue5: Sept-Oct of Each YearDeadl: 09/14/12-FriIssue5: Nov-Dec of Each YearDeadl: 11/12/12-Mon

Time: 04/25/15-8:00amFile: 4736LDMad03r13WRX.qx6Run File: 4736LDMad03r13_042512.pdf

� OPTION 1.1

Full page - Wire Rope Exchange WRX Trim: 8-1/8” (8.125) x 10-7/8” (10.875) Bleed: 8-3/8 (8.375)” x 11-1/4” (11.25) Colors: CyanMagentaYellowBlackSEND:Program: Hi-res PDFFonts: Included

Little Rock, AR3000 West 65th Street

800 . 749 . 3690

Muscle Shoals, AL1904 Webster Street

256 . 383 . 3212

Pascagoula, MS5615 Telephone Road

228 . 712 . 2933

Memphis, TN - Head Office950 Stage Road 800 . 395 . 5438

Cable Service

Four Yarbrough locations to serve your rigging needs…

Your Full Service Rigging Supplier

www.yarcable.com

You know us for our large, load tested below-the-hook wire rope rigging. Now get to know Yarbrough as your full-service rigging supplier.

Yarbrough can fabricate synthetic rigging to meet the requirements of any project. Need high-capacity synthetic rigging? Yarbrough is an authorized Slingmax® dealer and can fabricate Twin-Path® slings up to 500,000 lb. capacity.

Yarbrough is your source for quality wire rope blocks, sheaves,

rollers, or fairleads from McKissick, Lebus, Young, Gunnebo Johnson, and Skookum.

Need chain? We mechanically assemble and load test chain assemblies of all types, including lifting chains, tie-down chains, and more.

From the smallest aircraft cable assemblies to the largest multi-part wire rope slings, our wire rope technicians have the knowledge and experience to fabricate wire rope rigging for any application, large or small.

2 MARCH-APRIL 2013 WIRE ROPE EXCHANGE

[EDITOR’S NOTE]

Opposition is often what keeps us in the game, driving us past expectations and personal limits. It’s that guy ten feet ahead in the race that motivates us to kick in that extra leg to the � nish line. But what happens when you’re the guy cruising ahead? � e urgency is not felt and it’s harder to set your sights on the task at hand when the horizon seems open and expansive. In some instances, smooth sailing can lead to complacency. � is lesson was relived � rst-hand last year o� the coast of Italy with

the headline-grabbing wreck of the colossal ocean-liner, Costa Concordia, when a seemingly routine decision led to a startling disaster.

Today, that error has led to a massive salvage operation led by U.S. � rm Titan Salvage and Italian marine contractor, Micoperi. Together, the Titan/Micoperi team will work to remove the wreck in one piece, in one attempt with minimal risk, minimal environmental impact and maximum safety of the job. � e parbuckling of the Costa Concordia will be the largest and most unique wreck removal of its kind.

We also look at the state of barge tra� c along our nation’s lifeblood, the Mississippi River. Recent volatility with water levels has had rippling e� ects from source to mouth, and an entire industry has had to adapt to what many are calling a new normal. Finally, in the spirit of competition, the San Francisco – Oakland Bay Area makes room for another inspiring landmark. Set to open this coming Labor Day after over a decade of engineering and construction, the new Bay Bridge will serve as the world’s longest self-anchored suspension bridge, and a formidable engineering rival to the iconic Golden Gate Bridge. Whether it’s personal or business, competition is healthy and necessary for success. Just because you can’t see anyone in front of you to push you doesn’t mean that you can’t hear the footsteps behind you!

Stay in touch and let us know what’s new with your business or if any milestone celebrations are in the works. As always, thank you for being a part of the Exchange!

Melissa Hood, Editor | Wire Rope ExchangeP.O. Box 159323, Nashville, TN, 37215Email: [email protected]

Upcoming Events 2013NASCC: The Steel Conference April 17 – 19, 2013 | St. Louis, MO www.aisc.org

AWRF Spring General Meeting & P.I.E April 28-May 1, 2013 | Ft. Worth, TX www.awrf.org

WindPower Expo 2013May 5-8 | Chicago, ILwww.windpowerexpo.org

OTC 2013 May 6-9, 2013 | Houston, TXwww.otcnet.org

WSTDA 2013 Annual Meeting May 6-9, 2013 | Napa, Californiawww.wstda.com

AISTech 2013: Iron and Steel Technology ConferenceMay 6-9, 2013 | Pittsburgh, PAwww.aist.org

ACRP General AssemblyMay 7 - 10, 2013 | San Antonio, TXwww.acrp.net

IADC 2013 Drilling Onshore Conference & ExhibitionMay 16, 2013 | Houston, TXwww.iadc.org

Cordage Institute Annual ConferenceJune 2-4, 2013 | Dublin, Irelandwww.ropecord.com

CHECK IT OUT: www.wireropeexchange.comCHECK IT OUT:CHECK IT OUT:

Portsmouth, VA Docks from the Norfolk Waterside

Photo courtesy of Brad Frankenfi eld, Chant Engineering Co. Inc.

Industry Shots

IndianapolisIndianapolis Marriott North

For more information go to

www.craneandriggingconference.com

Early Bird Registration Expires April 26

Technology & Timeless Safety Topics Top Agenda.Register Now!

MAy29-302 0 1 3

EvEnt PartnEr

confEREncE topIcs

safety– Virtual Reality Training– Apps and Mobile Learning– Lift Planning– Hands-On Simulators

Business Issues– Labor Shortages– Business Plans– Accident Analysis– One-on-One with Industry Experts


top topIIcscs

Virtual Reality TrainingApps and Mobile Learning

Hands-On Simulators

Rigging– Multi-Leg Systems– Heavy Lift Shackles– Spreader Beams– Hands-On Inspection

Mobile and overhead cranes– Heavy Lifts– OSHA Regulations– Signaling and Communication– Rail Fastening– Hoist Brakes

Big industry.Big ideas.Big results.

Early Bird registration is $495 USD and includes admission to two-day conference and exposition as well as breakfast and lunch both days.special rates are also available to groups of three or more registrants from the same organization, contact Franci Motz at 602-368-8552.

76

[CONTENTS]

WIRE ROPE EXCHANGE MARCH-APRIL 2013 5

WIREROPEEXCHANGE.COM | 800.643.5189

MARCH/APRIL 2013VOLUME 28 | ISSUE 2

29 | WHATS NEWThe National Commission for the Certifi cation of Crane Operators (NCCCO) launches an online Certifi cation Verifi cation System, Harrington Hoists introduces HSC Grade 100 Sling Chain, US Cargo Control unveils new website and more.

31 | WRE CATALOG GUIDEView the latest product off erings and updated listings.

WRE CATALOG GUIDE

MARCH/APRIL 2013VOLUME 28 | ISSUE 2

FEATURES 2 | EDITOR’S NOTE

7 | INDUSTRY NEWS15 | WRE SPOTLIGHT

76 | WRE ADVISOR | BUSINESS

79 | ADVERTISER’S INDEX

80 | RIGGER’S CORNER

ON THE COVER: The cover photo, taken by a DIGITALGLOBE EARTHOBSERVING SATELLITE, shows the cruise ship Costa Concordia as it appeared from space on Jan. 17, 2012. The luxury cruise ship ran aground in the Tuscan waters off of Giglio, Italy on Friday, January 13, 2012.

Photo Credit: Digital Globe

IN THIS ISSUE

ON THE COVER: The cover photo, taken by a

16

22The Bay Bridge SAS’s single, nearly 1-mile-long cable iscomprised of 137 steel wire strands, each of which contains 127 steel wires.

16 | SALVAGING THE COSTA CONCORDIAIt’s been over a year since the cruise ship Costa Concordia struck a reef o� the shore of Isola del Giglio, in the Mediterranean. U.S. � rm Titan Salvage and Italian marine contractor, Micoperi have tirelessly worked to create an ingenious “parbuckling” plan for the largest-ever attempted maritime salvage operation.

22 | BAY BRIDGE NEARS COMPLETION � e dream of building the world’s largest Self-Anchored Suspension Span (SAS) is now a reality with the San Francisco-Oakland Bay Bridge. � is past November, workers completed the complex load transfer shifting the weight of the 35,200-ton decks from the temporary steel that supported them for the past few years and onto the tower, suspender ropes and main cable, which is the longest single looped suspension bridge cable in the world.

IndianapolisIndianapolis Marriott North

For more information go to

www.craneandriggingconference.com


Technology & Timeless Safety Topics Top Agenda.Register Now!

MAy29-302 0 1 3

EvEnt PartnEr

confEREncE topIcs

safety– Virtual Reality Training– Apps and Mobile Learning– Lift Planning– Hands-On Simulators

Business Issues– Labor Shortages– Business Plans– Accident Analysis– One-on-One with Industry Experts

Rigging– Multi-Leg Systems– Heavy Lift Shackles– Spreader Beams– Hands-On Inspection

Mobile and overhead cranes– Heavy Lifts– OSHA Regulations– Signaling and Communication– Rail Fastening– Hoist Brakes

Big industry.Big ideas.Big results.

Early Bird registration is $495 USD and includes admission to two-day conference and exposition as well as breakfast and lunch both days.special rates are also available to groups of three or more registrants from the same organization, contact Franci Motz at 602-368-8552.

Wire Rope Exchange March/April 2013, Vol. 28, Issue 2

Wire Rope Exchange is published bimonthly by Wire Rope Exchange, P.O. Box 159323, Nashville, TN 37215. Periodical postage pending at Nashville, TN and additional mailing offi ces. U.S. and International Annual Subscription rate: $124. Complimentary subscriptions are given on a controlled circulation basis.

The salvage operation of the capsized Costa Concordia is expected to be complete by the end of the summer 2013 costing an estimated $530 million. Caltrans, Copyright (2012) Caltrans,

Photographer: Bill Hall

Barges transit the narrow Mississippi River near

St. Louis, MO

U.S. Army Corps of Engineers

Roberto Vongher

Hoists: Hand, Air, & Electric | Modular Spreader Beams Come-a-longs | Trolleys | Slings | Beam Clamps | Gantries Machine Skates | Shackles | Hydraulic Cylinders | Winches Sheave Blocks | and More

Lifting Gear Hire Corporation haspartnered with industry leaders to offerrental equipment that exceeds expectations.

800-878-7305 | WWW.LGH-USA.COM/[email protected]

RENTAL OF LIFTING EQUIPMENT YOU CAN TRUST.


[INDUSTRY NEWS]

Kloss, Parrish Join Miller Lifting Products> Miller Lifting Products is pleased to announce two new leadership appointments, welcoming Marty Kloss and Brent Parrish. Marty Kloss has joined Miller Lifting as Director of Sales reporting to CEO, Paul Jankovic. Kloss will have overall responsibility for domestic and international sales activity for all products. He brings extensive sales and marketing experience in the material handling and lifting industry and comes to Miller from Tractel, Inc. where, over 20 years he held the positions of Material Handling Division Manager and VP Sales and Marketing, with responsibility for material handling products for North America. He will be based in Miller’s Massachusetts offices.

“Marty Kloss brings the acumen, energy, and experience necessary to broaden and invigorate the sales process, strengthen connections with current customers, gain new customers, and build the brand of Miller Lifting products. We are very excited to have gained his talent and expertise”, said Jankovic.

In a second announcement, Brent J. Parrish has been appointed Manager of Materials, located in Charlton, MA, reporting to Jack Gardner, Plant Manager. Parrish will have overall responsibility for production planning and control, inventory management, domestic and international procurement, and logistics.

Having held positions in procurement engineering, supplier quality, purchasing, and production control, including a number of leadership positions, Parrish brings the full range of materials management background to his new role. He joins Miller from J. Kittredge & Sons in Hudson, MA. His prior employers include Kollmorgen Corporation, American Thermaflo, and the US Navy where he was a submariner.

Miller Lifting Products is a manufacturer of high quality lifting and rigging components sold worldwide for all types of cranes and material handling applications in the energy, construction, utility, communications, manufacturing, maritime, military and other industrial sectors. Products include load hooks, hook blocks, ball bearing swivels, sheaves, and insulated lifting devices used for industrial cranes and for power line electrical safety. Miller Lifting Products has locations in Charlton, MA and Houston, TX and is a brand division of GHM Industries, Inc. ❙

Caldwell Builds for the Future> The Caldwell Group of Rockford, IL, which designs and builds engineered lifting products, has purchased a new 76,000 square foot manufacturing facility that will serve as the future home of the company. Caldwell a leading manufacturer in the lifting industry is currently located in 3 adjacent buildings in Rockford totaling approximately 50,000+ square feet. Sitting on 10 acres, the new building is strategically located only 5 minutes from their current location creating a win-win for their employees, suppliers and the customers they ship to around the world.

Caldwell, which started manufacturing lifting products in 1954, is a 100% employee owned company (ESOP). “The building is a great investment in our future for our employee owners”, says Caldwell’s President Doug Stitt. “We are working very hard to build our business and this property gives us the ability to continue our growth while providing a great place for our employees to work”, says Stitt. The new location offers a larger overall manufacturing area, higher capacity cranes, significant ceiling height and a new office area.

Despite Caldwell’s already broad line of products serving a variety of markets globally, the company works to add new items each year. According to Chris Mihalik, Caldwell’s Director of Sales, Caldwell manufactures products for many different applications. Everything from simple construction items to complex lifters used in steel mills to custom engineered lifting products used in aerospace applications. “This facility gives us a very solid platform to service our customers”, says Mihalik. “Part of that service is having the facilities where we can continue to build on the variety and quality of products we offer, this building does that for us.”

The company has not announced a move-in date yet but certainly expects to start enjoying the benefits and efficiencies of the new location in 2013. Stitt said, “While we are anxious to get in, this is the perfect time to make sure it is configured exactly the way we want it to support our operations in the most efficient manner possible.” ❙

Samson Announces New VP and Major Expansion> Samson, the worldwide leader in performance rope, announces the appointment of Joe

Mazzacano as Vice President of Sales & Marketing, effective as of January 1, 2013. In his new role, Mazzacano will leverage his strong knowledge of Samson’s strategy, markets, products, and customers to help foster company growth.

Mazzacano has been with Samson for 14 years as Vice President of Finance; a role that has included responsibility for Samson’s marketing department. As a member of the executive team, Mazzacano has been instrumental in successfully developing and executing the strategy of becoming the world-wide leader in high performance synthetic rope. Samson has experienced rapid growth and Mazzacano’s knowledge of Samson’s worldwide distribution network, end users, and market trends provide a solid foundation for this new role. Coupled with his understanding of the operations side of the business and strong leadership skills, Mazzacano is positioned to lead Samson’s growth over the coming years.

“I am excited to have filled this key position for Samson,” said Tony Bon, President. “Joe’s depth of experience in marketing and finance combined with his strong knowledge and leadership as a long-time member of our executive team will enable him to lead the organization in achieving its next phase of growth and business development. He has extensive experience working with our sales team and customers, and his direct responsibility over our marketing team has provided him with the foundation to ensure a successful transition to his new role.”

Mazzacano will have responsibility for Samson’s sales team that includes support locations throughout the US, Europe, Asia Pacific, and Australia.

In addition, Samson announces a major expansion of their Ferndale, Washington manufacturing facility and corporate offices. The new space significantly expands the facilities of the Research and Development department while providing additional lab and manufacturing space.

Long committed to maintaining the most advanced Research and Development organization in the industry, the expansion provides a central R&D Center housing the entire department for better group collaboration, more streamlined testing and enhanced interaction with production. A new training room with the capacity to house large groups is included in the expansion plan.


[INDUSTRY NEWS]

The additional manufacturing space allows for more efficient warehouse layout for quick and accurate order fulfillment, better forklift traffic patterns and enhanced facilities for production personnel.

The expansion is projected to be complete by the end of 2013. ❙

Southern Wire® Celebrates 40 Years with Jones and Adds to the Olive Branch Team> The year was 1973. Richard Nixon was President. Gasoline was 40¢ per gallon. Stamps were 9¢ each. Bell Bottoms were the fad, and the #1 song in the U.S. was “Me & Mrs. Jones” by Billy Paul. Along with that hit song, Southern Wire® made its own chart topping hit by hiring Robert “Garry” Jones. Jones was the fourth employee hired by Southern Wire®. He began working at the first Southern Wire® warehouse located in Memphis, Tn. Throughout the years, Jones has worn many hats and has been a valued participant in the positive growth of the company. He has worked in all areas of the shop from pulling hardware to fabricating wire rope slings to becoming a master of wire rope. He has the uncanny ability to give the

diameter, construction, and lay of a reel of cable with just a quick glance. In some way or another, Garry has trained each and every co-worker that has walked through Southern Wire’s® door over the past 40 years.

“Garry showed me ‘the ropes’ my first weeks with the company some 16 years ago”, stated Chris Allen, Salesperson for Southern Wire®. Chris continued, “As I watched, listened to, and followed Garry, I learned very quickly he took great pride in what he did and never took any short cuts. He has always enjoyed his job and continues to push others to take the extra steps above and beyond to ensure all work is top quality. Garry told me something my first week that I have never forgotten. He said, ‘If you do something for this company, do it correctly, and do it with pride. Take ownership of it because you are the face of Southern Wire®, and that’s something to be proud of.’”

When asked what he gained from his experiences at Southern Wire® over the past 40 years, Garry commented, “It’s all about taking pride in your job and the friendships you

forge. It’s more than just a job; it’s the family atmosphere with friendships that have been cultivated over the years. It goes beyond being a paycheck to me; it’s my way of life and my career.” He added, “Retirement is a something I cannot even think about right now. I don’t want to leave; I enjoy every day here with my Southern Wire® family. I have truly been blessed to be part of such a great team.”

The entire Southern Wire® family would like to take this opportunity to thank Garry Jones for all he has done for this company over the past 40 years.

For more than 40 years, Southern Wire®, a division of Houston Wire and Cable Company, has earned a reputation for understanding the unique buying requirements of their customers and delivering exceptional customer service and support.

As Southern Wire celebrates 40 years, the company announces the promotion of Logan Ragland to the position of Quality Inspector.

Ragland is a 2012 graduate of Tennessee Technological University with a BA of Science in Agriculture, Concentration in Agricultural Engineering. His background in farm management and equipment sales along with the knowledge he’s gained while working at Southern Wire over the past several months make him the perfect candidate for this technical position.

In addition, Southern Wire is also excited to announce the addition of Tammy McBride in the position of Administrative Asst. in the Olive Branch location.

McBride has more than a decade of experience as a Marketing Assistant. She is excited about the opportunity to apply her Administrative expertise while learning about a new industry. Southern Wire welcomes Tammy’s organizational skills, enthusiasm and friendly nature and is proud to have her as part of the Southern Wire family. ❙

Southwest Wire Rope Welcomes Fugate to Their Outside Sales Team> Southwest Wire Rope, a division of Houston Wire & Cable Co., proudly announces the recent addition of Jay Fugate to their Outside Sales Team.

Fugate has spent more than a decade working in the oil & gas industry. Most recently, Jay worked in Sales and Customer Service and was responsible for many high profile offshore accounts at Bishop Lifting in Houston, Texas. His vast experience and

knowledge of different facets of the industry along with his unmatched enthusiasm make Fugate a great fit with the Southwest Wire Rope sales team. ❙

Associated Wire Rope and Rigging Welcome Maxwell as Project Manager> Associated Wire Rope & Rigging, Inc. is pleased to announce a new addition to

CLASSIFIEDSSALES TEAM DIRECTOR Lafayette, LA MUNCY INDUSTRIES

> Muncy Industries, LLC, has been providing quality wire rope fittings, lifting hardware, and machines for over 60 years. Originally based out of Pennsylvania, Muncy has recently opened a second location in Lafayette, Louisiana. Muncy Industries is seeking an individual with experience in the wire rope industry to help lead the sales team in our Louisiana location. If interested, please contact Muncy Industries for job requirements.

Offering competitive wages alongside an excellent benefits package including 100% medical, life, disability, and 401K. Contact us via email for full requirements and to apply: [email protected] or fax:570-649-5850.

INSIDE SALES REP. Memphis, TN SOUTHERN WIRE

> Southern Wire, a leading wholesaler/distributor of wire rope, slings, chain, and fittings is expanding its sales force. We are seeking Inside Sales Representatives for the Memphis, TN area. We offer a competitive base salary and commission program. Our excellent benefits package includes medical, dental, life, disability, paid vacation, and 401K. Please visit company website: http://www.houwire.com

College degree preferred – Industry knowledge a must. Send resume in confidence to: [email protected] or Fax# 662-893-4732 *No calls please* ❙

CLASSIFIEDSSALES TEAM DIRECTOR Lafayette, LA MUNCY INDUSTRIES

> providing quality wire rope fittings, lifting hardware, and machines for over 60 years. Originally based out of Pennsylvania, Muncy has recently opened a second location in Lafayette, Louisiana. Muncy Industries is seeking an individual with experience in the wire rope industry to help lead the sales team in our Louisiana location. If interested, please contact Muncy Industries for job requirements.

alongside an excellent benefits package including 100% medical, life, disability, and 401K. Contact us via email for full requirements and to apply: [email protected] or fax:570-649-5850.

INSIDE SALES REP. Memphis, TN SOUTHERN WIRE

> distributor of wire rope, slings, chain, and fittings is expanding its sales force. We are seeking Inside Sales Representatives for the Memphis, TN area. We offer a competitive base salary and commission program. Our excellent benefits package includes medical, dental, life, disability, paid vacation, and 401K. Please visit company website: http://www.houwire.com

Industry knowledge a must. Send resume in confidence to: [email protected] or Fax# 662-893-4732 *No calls please*

Sick & Tired?

Chicago Philadelphia

Olive Branch

Houston

Kansas CityLos Angeles

Seattle

Tampa

Call Today 1-800-238-0333

www.southernwire.com

SOUTHERN WIRE

Sick and tired of hunting for quality products?

Southern Wire is your one stop shop for all your wholesale rigging needs!With quality and safety as our guide, it is our mission to deliver superior foreign and domestic wire rope, chain, and other related rigging products and fabricated assemblies with exceptional service. By purchasing in large volumes from qualified vendors, stocking at strategically located nationwide distribution centers, and utilizing proprietary state of the art technologies, we are able to provide same day shipping of stock items at outstanding value. The Southern Wire family strives to build strong relationships with our customers, employees, vendors, and community by exceeding expectations and providing long term competitive advantages.

A DIVISION OF


[INDUSTRY NEWS]

their team. Hannah Maxwell recently joined the company as Project Manager. Hannah is currently finishing her degree in Economics at UCLA and has worked in multiple industries throughout her college career. At Associated Wire Rope & Rigging she will work on a number of projects, including software conversions and advertising strategies. She is excited for the opportunity to apply her technical and creative expertise to a Lift-It Sets Another Milestone new industry and to contribute to the continued growth of Associated Wire Rope & Rigging.

Associated Wire Rope & Rigging, Inc. provides a wide range of lifting products and is the North American stocking distributor for RopeBlock VB and GN Rope Fitting, the producer of Sea-Link products, distributor for Van Beest, plus reseller for many other products. ❙

Alps Wire Rope Expands Into Texas> “Houston, we have lift-off!” Alps Wire Rope Corporation is pleased to announce the opening of their newest warehouse location in Houston, TX, located at 11550

Dumas Street. Abe Guerrero will be joining their existing sales team of Rick Coughran and Bill Lee, to manage the facility.

The increase in demand for Alps wire rope products from this important region of the country has led to the opening of this new distribution point. The new facility will provide Alps Wire Rope close proximity to their customers and business partners in the area.

It is always Alps’ goal to provide the best quality, faster delivery on our shipments, and greater access to their diverse line of wire rope products. In addition to Alps Oilfield Products, the company will be stocking Elevator Rope, Stainless Steel Ropes & Strands, Specialty Crane Ropes, and of course General Purpose Rope Products. Alps Wire Rope also offer wire rope assemblies from our fabrication facilityin the Chicago area.

“It’s about time! It’s been 10 years in the making,” says Rick Coughran, Market Development Manager and Director of Oilfield Products. “Alps Wire Rope Corporation and Texas; as they say here in Texas, this is huge!” ❙

Bridon Launches Advanced Steel Rope Development Facility> International rope manufacturer Bridon has launched a state-of-the-art facility for the development of the world’s most advanced steel ropes. The Bridon Technology Centre (BTC) houses a range of purpose-built equipment to test rope properties and performance, enabling Bridon to refine complex rope constructions and optimise their design. The facility is set to develop the largest and most sophisticated rope products ever made available. According to Global CEO John Templeman, “This state of the art facility will enable us to develop and test ropes that perform at the highest levels in the harshest conditions on earth, and to collaborate with our customers on tailored solutions to the toughest challenges they face.”

Bridon has cited demand across a number of key industries as the primary motivation behind the Centre’s development, noting the widespread need for stronger, more sophisticated ropes that can perform at the highest levels in the world’s most punishing environments. Bridon has invested £5 million

www.allmaterialhandling.com 877-LIFT AMH

Ship Same Day!

1/4-ton up to 30-ton capacity lifting equipment & accessories.

C. DREW® MARLIN SPIKES

We pay shipping on ordersof six or more spikes within the U.S.

Quantity discounts are available.

WINDY RIDGE CORPORATIONP.O. Box 32

Tamworth, NH 03886800-639-2021

603-323-2323 FAX [email protected]

[INDUSTRY NEWS]

in the Centre’s custom-made testing and analysis equipment, which is designed to evaluate advanced rope constructions for their suitability in even the most challenging conditions.

The facility has the capacity to test samples from ropes that will weigh hundreds of tonnes, assessing their strength under extreme loads, their endurance against bend fatigue, their rotational characteristics, and their response to repeated layering on smaller, more economical spools. It is also invested with the latest 3D Microscope technology to examine ropes in minute detail, allowing for some of the most rigorous examinations ever conducted.

BTC also affords Bridon the opportunity to work with customers on selected technical projects. Over the coming months, the company is expected to enter talks with major operators looking to optimise a rope for their equipment or application.

The launch of the Bridon Technology Centre follows the opening three months ago of Bridon Neptune Quay – a state of the art manufacturing facility capable of producing the largest and most complex ropes in the world. ❙


TNT Acquires Southway Crane & Rigging Companies> TNT Crane & Rigging, Inc. (TNT) announced early January that it has merged with the Southway Crane & Rigging Companies headquartered in Macon, Georgia. Southway is a full-service mobile crane provider with eight branches serving the Southeast US including Georgia, South Carolina, Northern Florida and Tennessee. With the addition of Southway, TNT has expanded its geographic operations from primarily Texas, Louisiana and Oklahoma to an enterprise that now spans from West Texas to the Atlantic seaboard. TNT now owns approximately 380 cranes and provides full service capabilities utilizing its portfolio of truck mounted, all-terrain, rough terrain, crawlers, mobile gantries and rigging solutions with lifting capacities ranging from three tons up to 1,330 tons. TNT has further diversified its’ client base with the acquisition of Southway and their strong presence in the Power, Pulp & Paper, Telecom and Mining businesses. TNT participates in these and other industry verticals including Refining, Petrochemical, Oil & Gas, Wind (maintenance) and General Commercial Construction among others.

Michael Appling Jr., President and CEO of TNT stated, “We are extremely excited to bring together two of the best crane companies in the business. This combination puts us in a stronger and more competitive position from numerous perspectives. We will achieve greater industry and geographic diversification, which greatly mitigates our overall business and concentration risk. Our combined fleets and capabilities, strong customer relationships and deep operational experience provide an excellent runway for strategic growth through maximizing utilization, penetrating new contiguous markets and taking advantage of pull through customer relationships in new geographies. Both TNT and Southway work hard to be industry leaders in safety and operational excellence and this combination can only strengthen our reputation and market position. We welcome the Southway employees into the TNT family and we enthusiastically look forward to building and growing a great company together.”

Kregg Lunsford, who recently joined TNT as Chief Development Officer added, “Southway has an impressive management team and their approach to growing the business is perfectly aligned with our strategy. We are thrilled to join forces with Jerry Reynolds, Greg Fussell, James Simons, Guy Lopez and the entire Southway team. In this business we own and operate a

THE LOSS OF ED BLUVIAS> Edward Bluvias, 70, died Monday, February 11th, at JFK Medical Center in Edison, N.J. Mr. Bluvias was born in Newark, N.J., and he lived in Winfield Park, N.J., from 1968 to 1984, when he moved to Colonia. Edward was a self-employed publisher for Wire Rope News & Sling Technology in Colonia, starting in 1979. Earlier, he worked as a foreman for Metro Wire Rope in Union, N.J. He was a member of the NRA. Surviving are his wife of 49 years, Patricia (Carter) Bluvias; his children, Edward J. Bluvias Jr. and his wife, Rosemary, of South Plainfield, N.J.; Lorraine Bluvias, of Woodbridge, N.J., and Sandra Ashton and her husband, William Pena, of Winfield Park, N.J.; a brother, James Bluvias of Point Pleasant, N.J.; a sister, Patricia Balewitz of Edison, N.J., and two twin grandsons, Joshua and Jacob Ashton. The family requests donations in his loving memory be sent to the American Stroke Association , 7272 Greenville Ave., Dallas, Texas 75231 www.strokeassociation.org ❙.

THE LOSS OF ED BLUVIAS>February 11th, at JFK Medical Center in Edison, N.J. Mr. Bluvias was born in Newark, N.J., and he lived in Winfield Park, N.J., from 1968 to 1984, when he moved to Colonia. Edward was a self-employed publisher for Technology1979. Earlier, he worked as a foreman for N.J. He was a member of the NRA. Surviving are his wife of 49 years, Patricia (Carter) Bluvias; his children, Edward J. Bluvias Jr. and his wife, Rosemary, of South Plainfield, N.J.; Lorraine Bluvias, of Woodbridge, N.J., and Sandra Ashton and her husband, William Pena, of Winfield Park, N.J.; a brother, James Bluvias of Point Pleasant, N.J.; a sister, Patricia Balewitz of Edison, N.J., and two twin grandsons, Joshua and Jacob Ashton. The family requests donations in his loving memory be sent to the American Stroke Association , 7272 Greenville Ave., Dallas, Texas 75231 www.strokeassociation.org


[INDUSTRY NEWS]

large fleet of expensive cranes but our most valuable asset is our people. The human capital coming with this transaction provides us critical leadership and experience that will enable us to continue performing safely and profitably at a high level and executing our growth strategy.”

Jerry Reynolds, founder and majority shareholder of Southway, will join TNT as Executive Vice President managing the Southeast region and will continue as President of the Southway companies. Jerry commented on the transaction, “Our employees are excited about this deal. This expands our geographic foot print and we’ve already identified real opportunities to share assets and expertise across our respective regional markets and customers. Southway and TNT share a common culture around safety, excellent service and smart business. We are going to have a lot of fun taking this business to the next level.” ❙

and information is not only an excellent complement to Master Lock’s current Lock-Out / Tag-Out (LOTO) offering, but also provides an organization broader safety audit and compliance tools,” said Franco Daino, VP/GM, Life Safety at Master Lock Company. “With the acquisition of Field ID, we are well-positioned to execute against our vision of a successful Life Safety program and look forward to offering this solution to institutions and industrial companies around the world.”

Field ID will continue to operate independently from its Toronto headquarters but will leverage Master Lock’s sales and marketing capabilities.

“Modern safety management includes using the latest technology,” said Somen Mondal, Vice President, Sales & Marketing of Field ID. “With the popularity of mobile devices and acceptance of software-as-a-service, we’ve seen tremendous growth here

Master Lock Acquires Field ID Safety Software> Master Lock Canada, Inc., a wholly-owned subsidiary of Master Lock Company LLC, has completed an agreement to acquire N4 Systems, Inc., the company behind Field ID, a leading provider of safety management software. Field ID will become a new, complementary offering in Master Lock’s Life Safety business.

Field ID’s software-as-a-service product offering gives customers around the world the ability to manage safety more efficiently and effectively with the use of mobile apps and the web. The Field ID solution will complement existing solutions offered by Master Lock’s Life Safety business, such as lockout/tagout locks and accessories for industrial safety.

“Field ID’s comprehensive system for digitizing safety management tasks

NEW ENGLAND ROPES 848 AIRPORT ROAD • FALL RIVER, MA 02720

508-730-4524 • [email protected]

WIRELESSIT‘S TIME FOR YOUR BUSINESS TO GO

WIRELESS PLAN

DOESN’T RUST

LIGHTER

MORE DURABLE

EASIER TO HANDLE

JUST AS STRONG

FIBER BENEFITS

Call today to find out even more reasons why you should go wireless. Save time, save money, and work smarter with fiber ropes!


at Field ID. Together with Master Lock, we expect exponential growth in the adoption of Field ID among safety professionals around the world. We are truly looking forward to working with them and providing our customers with an even better experience than they’ve come to know.”

Shaun Ricci, Vice President of Technology and Product, added: “Safety compliance is a very documentation-heavy and challenging process. Completely automating and simplifying safety compliance has always been a very ambitious goal of ours. With Master Lock as a partner, we have truly taken a giant step forward in realizing this goal with many more customers.” ❙

Harrington Hoists Expands Manufacturing and Assembly to Elizabethtown, PA> Harrington Hoists, Inc., recently leased 97,000 square feet of commercial property in the Elizabethtown, PA, Conewago Industrial Park. The company will occupy the space in early December and hopes to be fully operational by May 2013. The company has begun to hire new people to begin operations at this facility. Additional workers will be hired after operations begin in April of 2013.

The space is needed to support the company’s growth in North American manufacturing and for the expansion of their sales. Harrington will house warehousing and assembly operations in this facility. Operations, fabrication and cell production manufacturing will remain at the Manheim PA facility.

Harrington Hoists, Inc. is a wholly owned subsidiary of Kito Corporation, of Japan and is part of the Kito Group. Harrington’s additional manufacturing is part of a corporate strategy of global expansion. “This move is a huge step in our global manufacturing diversification and will allow Harrington Hoists, Inc. to improve our service to the U.S. and the Americas” said Carlo Lonardi, COO of Harrington Hoists. Inc. “We have been very excited to work closely with our parent company, Kito Corporation, in the moving of both the sourcing and manufacturing operations to the U.S. for these particular products. The proximity to our suppliers and our Manheim resources has made Elizabethtown the ideal location for this new operation” ❙

WireCo Worldgroup Expands at Kansas City Headquarters> As reported in the Kansas City Business Journal, WireCo WorldGroup Inc. is adding 11,800 square feet to its international headquarters and will have over 71,000 square feet available for use at its headquarters facility near the K.C. International Airport that it first moved into in 2008.

“I think it’s more reflective of the hiring we’ve already been doing,” said Dave Hornaday, Vice President of Corporate Administration at WireCo. “We brought a number of people on during the last few months of 2012 and have a few more coming in. WireCo Worldgroup currently employs over 150 people at its Kanas-City based headquarters alone. ❙

[INDUSTRY NEWS]

W W W. K U L K O N I . C O M | 1 - 8 0 0 - 2 3 1 - 2 3 5 7K u l k o n i I n c . | 5 0 2 G a r d e n O a k s B l v d

H o u s t o n , Te x a s U S A 7 7 0 1 8

L I F T I N G & R I G G I N G S U P P L I E S

We Owe Our Success To Our Loyal Customers - THANK YOU!

Our industry has undergone significant changes over the last 50 years, but our model has remained the same - we aim to supply you with top quality products at a competitive price, on time, every time.

Recognize the Kulkoni Advantage when using: American Wire Rope, Red & Yellow, our trademarked domestic brand

Kulkoni Wire Rope, Blue & Yellow, our trademarked imported line of ropes� •�Plus�an�unmatched�selection�of�domestic�and�imported

rigging hardware and chains

Kulkoni – Built On Your Trust.

American Wire Rope, Red & Yellow, our trademarked domestic brand American Wire Rope, Red & Yellow, our trademarked domestic brand American Wire Rope, Red & Yellow, our trademarked domestic brand Kulkoni Wire Rope, Blue & Yellow, our trademarked imported line of ropes Kulkoni Wire Rope, Blue & Yellow, our trademarked imported line of ropes Kulkoni Wire Rope, Blue & Yellow, our trademarked imported line of ropes

CELEBRATING FIFTY YEARS

kulkoni_WRTec_8.5x10.875.indd 1 3/21/13 3:24 PM


[WRE | SPOTLIGHT]

TONY FISCELLIon Becoming the Best

Lifting Gear Hire’s head o� ce is located in Bridgeview, IL and has one hundred-thirty employees. LGH’s goal is to see the business continue to grow and expand like they have in the past. � ey have plans this year to add three more locations and a number of sales and support sta� . LGH has come a long way since 1990, which included a sta� of three working in a � ve thousand square foot warehouse.

Q&A WITH LGH PRESIDENT TONY FISCELLI:When did you start learning the business?

I started to learn the business in 1992 as a shop employee/driver. I was in college at the time, this was my summer job. � e company was very small with only a handful of employees. While working in the shop on equipment for three summers, I was able to learn a great deal about the rental products pertaining to service and operation. I still use this knowledge today.

What do you enjoy most about the industry?

I enjoy the fast pace of the industry. I have to be able to react and make decisions every day, all day in order to provide excellent products and customer service to our customers. I try to remember that the most valuable asset to have is the ability to give my time and energy to the people that I work with.

Who is the most infl uential person you have met and why?

By far, the most in� uential person is my father. I have learned so much from him over the years. He was the original LGH employee in 1990 when he was hired by the Parkinson Family to start and operate the LGH business for them. Working with my father and being able

to grow the company with him over the years has been an experience that I can never replace or forget. I feel very fortunate to have been able to be mentored by my father.

Can you describe a hurdle you have faced in the industry and what you have learned from it?

Over the past few years we faced a number of hurdles as a Corporation. As a management team, we are committed to not losing focus. We stay focused by developing action plans, as well as sales strategies to help overcome the poor economy. � is will make us much stronger when the economy returns to normal. Lifting Gear Hire has spent a great deal of time and energy on this, which is why we have been very successful over the past few years. I learned that when you face adversity in any way, and you are able to continue to stay focused and have a plan, you will be able to overcome anything.

What hobbies do you like and why?

Ice hockey was my sport for many years throughout high school and college, but I have wisely given it up. I now enjoy golf and hiking, it is much easier on the body. I try to be active outside as much as possible.

Where did you grow up?

I grew up in Crete, IL.

Can you tell me about your family?

My family is very close. I been married to my wife for thirteen years and we have two beautiful girls, ages nine and seven. � ey keep us very busy. � e girls are at such a great age now that I try not to neglect the time I have with them because it goes by so fast. ❙

Lifting Gear Hire’s head o� ce is located in Bridgeview, IL to grow the company with him over the years to grow the company with him over the years

A long journey with only one thing in mind: To Become the Best. Lifting Gear Hire Corporation (LGH) was founded in the U.K. by Bill Parkinson. In 1990, he decided to expand the LGH concept to the United States. Now, LGH has fourteen locations in the U.S. and is supported by over

thirty rental representatives nationwide. LGH provides for rent or sale, hoisting, pulling, jacking, rigging, material handling and safety equipment to meet virtually every conceivable lifting or moving need. All rental stock is maintained in excellent condition and ready for safe and immediate use.

BY STEPHANIE BARNETT


O� the coast of Tuscany, near the island of Giglio, salvage crews continue to work around the clock to safely remove the wreck of the Costa Concordia. � e cruise ship collided with a reef on unlucky Friday the 13th of January 2012, killing 32 aboard.

At twice the size of the Titanic, it’s the largest passenger-vessel shipwreck in history, and its removal poses some colossal challenges that are both signi� cant and unique.

For starters, the ship is essentially a 60,000-ton sitting duck, � lled with another 180,000-tons of seawater, marooned on its side along underwater mountain peaks. Its 1,500 luxury cabins, 18 restaurants and bars, four swimming pools, � ve Jacuzzis, and a casino are all askew: the � oors where passengers once strolled to their next leisure activity have become the walls where workers hang and store their equipment.

While the Concordia is o� cially a wreck, it has not come to a � nal resting place on the bottom of the sea, but, instead, is languishing in a manmade state of limbo. To prevent further damage, the 15-story vessel has been secured by a series of massive wire-bundles (from 16 x strand-jacks), holding the wreck in place for the duration of the recovery e� ort.

� ese circumstances are exacerbated by the ship’s fragile state and its precarious position in a nationally protected marine sanctuary that serves as the habitat for some 700 botanical and animal species.

“� roughout the operations, environmental protection will have top priority,” said Pier Luigi Foschi, Chairman & CEO of Costa Crociere S.p.A., the Concordia Owners, who are overseeing the project. “As was the case with the removal of the fuel, we have sought to identify the best solution to safeguard the island and its marine environment.”

To that end, Costa Crociere and its parent company—Carnival Corporation & plc, London O� shore Consultants, and the Standard P&I Club—selected Titan Salvage and Micoperi, internationally renowned experts in the � eld, to orchestrate this historic undertaking. American-owned Titan Salvage, part of the Crowley Group, is a leading marine salvage and wreck-removal company. Italian marine contractor Micoperi has an extensive history as a specialist in underwater construction and engineering.

COSTA CONCORDIAWIRE ROPE PLAYS PIVOTAL ROLE IN HISTORIC WRECK-REMOVAL EFFORTBY JENNIFER H. MCINERNEY

SALVAGING THE


some colossal challenges that are both signi� cant and unique.

marooned on its side along underwater mountain peaks. Its 1,500 luxury cabins, 18 restaurants and bars, four swimming pools, � ve Jacuzzis, and a casino are all askew: the � oors where passengers once strolled to their next leisure activity have become the walls where workers hang and store their equipment.

but, instead, is languishing in a manmade state of limbo. To prevent further damage, the 15-story vessel has been secured by a series of massive wire-bundles (from 16 x strand-jacks), holding the wreck in place for the duration of the recovery e� ort.

protected marine sanctuary that serves as the habitat for some 700 botanical and animal species.

Chairman & CEO of Costa Crociere S.p.A., the Concordia Owners, who are overseeing the project. “As was the case with the removal of the fuel, we have sought to identify the best solution to safeguard the island and its marine environment.”

Consultants, and the Standard P&I Club—selected Titan Salvage and Micoperi, internationally renowned experts in the � eld, to orchestrate this historic undertaking. American-owned Titan Salvage, part of the Crowley Group, is a leading marine salvage and wreck-removal company. Italian marine contractor Micoperi has an extensive history as a specialist in underwater construction and engineering.

HISTORIC WRECK-REMOVAL EFFORTBY JENNIFER H. MCINERNEY

One of the anchor blocks that will hold a platform in place is being lowered to the seafl oor.

The salvage operation is expected to cost $400 million.The ship should be fl oated upright by summer 2013.

Before they can start on the job, workers must take a 4-day mountain climbing course.

Photos courtesy of project partners Costa Crociere and Titan Micoperi


COSTA CONCORDIA

CRITICAL CONCERNS CONSIDERED� is is not your typical salvage operation, and innovative ideas for removal were a requisite. Foschi pointed out that the Titan Salvage/Micoperi proposal best ful� lled the project’s main objectives, including removal of the wreck in one piece, minimal risk, and minimal environmental impact, among others.

Likewise, environmental concerns are driving the removal strategy devised by Titan Salvage and Micoperi. Rescuing the vessel as a whole, rather than in parts, ensures the least amount of damage to the marine environment—but poses perhaps the greatest di� culty from an operational standpoint.

� e solution they’ve come up with is to parbuckle—or rotate to an upright position—the partially submerged luxury vessel and tow it away. � e time-consuming, multi-phase process must be completed before storms strike and splinter the Costa Concordia. Not surprisingly, wire rope is essential to the parbuckling e� ort.

While racing against time, the elements, and countless unknowns, Titan Salvage/Micoperi is also contending with what’s been deemed one of the riskiest, most complex, and—with an estimated cost of well over $400 million—most expensive salvage projects of its kind.

And that’s not all: for the parbuckling operation to succeed, it must be accomplished in one attempt.

UNKNOWN FORCES AT WORKIn spite of the careful preparations and diligent progress, no one is 100 percent sure that the multifaceted project will be successful.

Because of the ship’s tilted position, workers have been unable to measure, � rst-hand, the extent of damage to the Concordia’s interior structural integrity; instead, engineers have relied on technology to hypothesize outcomes.

“� e condition of the internal structure of the Concordia is based on assumptions of damage that has not been sighted, but that has been ‘modeled’ after review by a large team of engineers,” explains Captain Nicholas Sloane, Senior Salvage Master for the project. “� ese assumptions always mean that the actual structure of the Concordia—and her reaction to the parbuckling forces—shall be di� erent to that in the computer model, and these di� erences shall add to the risks of the whole operation.”

Forces such as weather and sea conditions add to the long list of unknowns that must be considered. “Weather factors on the day of the operation are unknown at present, but we have to have

January 2013, The wreck of the Costa Concordia cruise liner lies on rock in the port of Isola del Giglio. She ran aground on January 13th, 2012 and one year later, Titan/Micoperi’s salvage crews work day and night to refl oat the ship in order to tow it away from the environmentally sensitive area to be scrapped.

Photo Credit: MALAVOLTA FRANCESCO/SIPA/1301131959


limitations on wave and swell actions to avoid increased risks of shock-loads and failure.”

However, every precaution has been taken in the preparations. Sloane adds: “� e complete parbuckling system—both inshore and o� shore—has been designed to complement each other and allow for variations in the expected loads due to the unknown factors, or factors where assumptions have been made. While the unknown adds risk to the operation, we feel the redundancy in the system and the ability to adjust the complete system loads, and individual loads, shall allow us to deal with these risks.”

PROJECT PHASES UNDERWAYTitan Salvage and Micoperi began the wreck-removal process in May, 2012, and intend to undertake the parbuckling and towing of the Costa Concordia by the end of this summer. At the site, about 460 workers, engineers, and divers, representing 18 nationalities, are working day and night, seven days a week, using about 20 vessels.

� e project includes six phases, some of which have already been completed:Stabilization: � e ship has been secured to prevent further sinking or slippage with an anchoring system along the sea � oor.Creation of False Bottom: Crews have completed almost 50% of the foundations for the six undersea platforms on which the wreck will rest once it’s been rotated into a vertical position.Installation of Re� oating Sponsons: With the help of Micoperi’s crane, 11 of the 15 re� oating sponsons will be installed on the left side of the wreck.Parbuckling of Vessel: � e rotation of the ship will be done carefully, with pre-tensioning over several days before the day she actually

5 ¼" Holdback chains at more than

300KG per meter

“This is an unprecedented operation. It’s the biggest ship recovery operation ever, by quite some margin.” - Captain Nicholas Sloane, Senior Salvage Master,

Costa Concordia Removal Project

“This is an unprecedented operation. It’s the biggest ship recovery operation ever, by quite some margin.” - Captain Nicholas Sloane, Senior Salvage Master,

Holdback system and stabilization

Underwater support and portside sponsons

The Parbuckling Starboard sponsons Refl oating

Diagram, photo and ship renderings courtesy of project partners Costa Crociere and Titan M

icoperi

Titan/Micoperi found a key contributor to the parbuckling e� ort in the Alioto Group, which hails from nearby Castelnuovo Magra, Italy. For nearly 40 years, the Alioto Group has been involved in the manufacture, trade, and testing of steel wire ropes, slings and lifting accessories, and stud-link anchor cables for maritime applications. Building upon four decades of consistent quality, reliability, and technological advancement, the family-owned company has positioned itself as a leader in both domestic and international markets.

For the Costa Concordia salvage project, the Alioto Group has provided Titan/Micoperi with a variety of essential materials, including heavy lifting steel wire rope grommets, mooring ropes, and 300-ton shackles and chains.

“Thanks to our short distance from Giglio Island, our available stock of heavy lifting equipment, and 24-hour emergency service, we had the opportunity to supply Titan/Micoperi and Titan Maritime with essential products to fulfi ll their specifi c requirements quickly and e� ciently,” observes Chiara Alioto, the company’s General Manager.

Its array of wire rope products includes galvanized steel cables for high-performance machinery, galvanized ropes for through-cable winches; twist-proof cables for tower cranes, crane trucks, and drilling machines; spiral cables and stainless-steel cables; as well as ungalvanized ropes for lifts. Alioto also stocks an array of rigging supplies from a wide range of shackles, thimbles, and hoists to round slings and fl at webbing slings. In addition, the company tests them for overall quality on their 175 ton test bed, and currently is building a new test bed with a capability of 1000 tons.

While the Alioto Group has worked on myriad projects over the years, helping to salvage the Costa Concordia has been a unique and satisfying experience.

“It has been a great pleasure for us to cooperate with all of the serious and professional people deeply involved in a very critical and responsible job, in one of the most beautiful islands of our country,” Alioto concludes.

For more information on the Alioto Group, please visit aliotogroup.com.

THE ALIOTO GROUP BRINGS STRENGTH TO THE COAST >


Photo courtesy of project partners Costa Crociere and Titan Micoperi

Photo courtesy of the Alioto GroupPhoto courtesy of the Alioto Group

Above photos courtesy of project partners Costa Crociere and Titan Micoperi

One of the underwater platforms that will support the Costa Concordia once it’s upright. The weight of all the steel used in the salvage is equivalent to three Eiff el Towers.


parbuckles, and will involve 60 strand jacks to tighten a series of cables that will be used to pull the wreck into an upright position.Re� oating Sponsons, Part Two: An additional 15 sponsons will be attached to the starboard side of the wreck, along with the last 4 sponsons onto the portside, for use in the re� oating stage.Re� oating: With the hull resting on the false bottom, water will be drained from the sponsons via a pneumatic system and the re� oating will commence.It’s during the parbuckling stage—which is the most delicate and perhaps the most critical—that wire rope will play a pivotal role.

“� ere are 36 strandjack wire bundles/machines, and each wire bundle has 18 x 19-millimeter smaller wires as a part of the bundle,” Sloane explains. “� ese are all � tted from the o� shore side of the � otation sponsons to the outboard side of the platforms. � ere are also 24 strandjack wire bundles/machines that pull the hold-back chains underneath the Concordia, adding to the rotational forces. � ese are made up of 5 1/4-inch chain, into Dyneema Ropes (of 128-millimeter diameter), and then connected to the strandjacks themselves.”

Given the placement of the cables on the side of the vessel, the installation must be performed slowly and carefully to ensure the utmost precision.

“Once the � otation sponsons have been welded onto the side of the Concordia, the strandjacks are � tted,” he continues. “First the strandjacks are � tted to the top of the sponsons, then each individual ‘bitter end’ of the strand-bundles of wire, are moved o� shore and attached to the outside of the platforms, onto pre-installed ‘Delta-plates.’ � e middle nine sponsons shall each have four strandjacks � tted. � is process shall be extremely slow, as the length and weight of the wires/strandjacks and the distance and height between the

connection points shall be challenging. We hope to be able to � t four strandjacks per day.”

Each of the 36 cables being used is rated at 500 tons, but will be limited to 350 tons for the operation, according to Sloane. Each wire-rope bundle is 120 meters long, allowing for wire-slack in the system. � e o� shore rotational forces will total 12,000 tons.

Inshore, the 24 wire-rope/chain systems are characterized as 5 1/4-inch chain at 50 meters in length, with 50 meters of the 128-millimeter Dyneema ropes into 16-meter x 130-millimeter wire grommets connected into the 36-meter strandjack wire rope bundles. � ese strandjacks are more powerful, Sloane points out: each strandjack is rated at 750 tons but will be limited to 500-ton pull for the operation. � e total inshore rotational forces are also12,000 tons.

� ese cables/ Dyneema/ Chain systems have been chosen speci� cally for parbuckling the Costa Concordia, Sloane notes.

“Each strandjack machine is able to measure the load and adjust the forces on each individual wire in the wire-rope bundles. � is allows � nite control of the whole system through computer programming and allows for the loads to be adjusted as the Concordia rolls over,” he says. “Because we expect there to be a lot of minor structural failure of the Concordia herself, there shall be ‘minor shock-loads’ to the systems—the 50% additional margins on strandjack capability shall allow for these shock-loads to be accommodated.”

� e maintenance of the cables poses little to no challenge, since all of the wire ropes and chain components will be brand-new and installed just before the � nal phase. � eir exposure to seawater will be a month to six weeks at most.

“� e pulling capability of the strandjacks machines can allow for some oxidation of the individual wires to occur, without compromising the systems, but the electronics do not like sea-water ” he concludes.

If all goes according to plan, the Costa Concordia will embark on its � nal voyage by the end of this summer—thanks, in large part, to the reliable applications of wire rope, chain and synthetic marine lines that allow for this innovative approach of historic proportions. ❙For more information, please visit theparbucklingproject.com.

(Above and Right): Strandjacks (individually controlled by computers) mounted on the tops of turrets are attached to chains (two per turret or a total of 24 chains) that pass under the hull and are fi xed to the port side of the wreck. This holdback system will be used for balancing purposes during the rotation and parbuckling of the wreck.

Photos courtesy of project partners Costa Crociere and Titan Micoperi


BY STEPHANIE AURORA LEWIS

“Where is the safest place to be in San Francisco when the soon-coming Big One strikes,” asks Ira Flatow, the host of NPR’s Science Fr iday, joking with his audience. Marwan Nadar, PhD, the Lead Design Engineer of the San Francisco-Oakland Bay Bridge answers Flatow’s question, “the safest place in the Bay area may indeed be sitting in your car on the new eastern span on the Self-Anchored Suspension (SAS) Bridge.” Marwan Nadar represents T.Y. Lin International who joined with Mo� att Nichol Engineers as a joint venture company to design the new SAS Bay Bridge for Caltrans, the California Department of Transportation. Of all the materials used in Nadar’s avant-garde seismic bridge design, wire rope is the key element.

SAN FRANCISCO-OAKLAND

BAY BRIDGENEW HOME TO THE LONGEST SELF-ANCHORED SUSPENSION BRIDGE IN THE WORLD

QUAKE OF ‘89On October 17th, 1989, the San Andreas Fault shifted to produce the devastating 7.1 magnitude Loma Prieta earthquake which shook the Bay area long and great enough to cause billions of dollars of damage and a renewed fear for seismic movements. Many Americans remember this earthquake because it delayed the World Series Game � ree that took place that year in San Francisco between the Oakland Athletics and the San Francisco Giants.

� e original Bay Bridge was designed by the chief engineer Charles Henry Purcell in 1936. Later in 1955, the American Society of Civil Engineers named the Bay Bridge as one of the seven modern civil engineering wonders of the United States. When the Quake of ’89

shook, the eastern part of the bridge shifted seven inches, causing the bolts of one section to shear o� , sending a 250-ton section of the bridge’s roadbed crashing down. � e crash caused one car to its fatal plunge and bridge closure for 30 days.

THE FUTURE BRIDGECaltrans is the project’s client who set serious goals for the new Bay Bridge to make sure that history would not repeat itself as it did on that tragic day in 1989. First of all, the existing bridge of 1936 was a structural steel truss system that would have been too di� cult to retro� t and repair for updated seismic prevention design. Secondly, the bridge needed to be able to survive for 150 years. � irdly, the bridge was to withstand

BAY BRIDGECopyright (2012) California Departm

ent of Transportation, Photographer: Bill Hall


NEW HOME TO THE LONGEST SELF-ANCHORED SUSPENSION BRIDGE IN THE WORLD

Suspender ropes drape down from the single main cable of the Oakland-Bay Bridge. The 200 suspender ropes were fabricated by WireCo WorldGroup of Kansas City, Mo., while the cable bands were fabricated by Goodwin Steel Castings in Stoke-on-Trent, England. The Suspender Ropes range in length from 16 to 656 feet and vary in weight from 250 pounds to more than seven tons. Despite the varying lengths and weights, the ropes are either 2.8 or 3.5 inches thick; the slightly thinner ropes can hold more than 1 million pounds, while the slightly thicker ropes can carry a weight of 1.5 million pounds.


signi� cant seismic events so that the roadway would remain open for emergency vehicles.

� e entire Bay Bridge crosses from San Francisco to Oakland via several connecting parts including a tunnel and two bridge spans. � e western suspension bridge was updated with extensive seismic retro� tting. � e eastern section was completely replaced with the innovative Self-Anchored Suspension (SAS) Bridge. “What makes a SAS di� erent from the average suspension bridge is that the main cable used to uphold the bridge is anchored into itself creating a type of structure like that of a hanging basket,” says Nadar.

Geological scientists predict that there is a 60 percent chance for a major earthquake to hit San Francisco within the next 30 years. Each part of the SAS Bridge, the decks, the towers, and the wire ropes will all move in an earthquake, but are designed to not fully

break apart. Some concrete pieces are designed fail and then be easily repaired after the event without having to shut down the bridge’s tra� c. Caltrans takes this project very seriously. “� e construction team has a photo of the 1989 bridge failure in every construction trailer as a reminder of why they are doing the project,” says Jordana Jackson, a representative of Caltrans.

THE BRIDGE’S ENGINEERING FEATURES� e SAS has just one tower and spans 2,047 feet across the eastern part of the Bay Bridge expanse, making it the longest self-anchored suspension bridge in the world. � e singularly-long cable stay is anchored underneath one side of the bridge and then anchored into the roadway on the other side. 200 suspender ropes then hang o� the main cable stay and fully support the roadway sections below.

� e tower has four independent legs that rest on soft soils rather than on stone as most other bridges that have a more solid foundation. “Soft soils o� er very little resistance naturally for the foundation. � erefore, it was critical to design the bridge to move and � oat during the shaking as di� erent pieces. We designed the bridge by looking at every microsecond of how the structure would react during a seismic event through a computer program,” says Nadar.

When the tower supports move in an earthquake, there is a � exible connector that will be able to cushion the tower supports so that they will not break apart. Likewise, there are pins holding together pieces of the roadway so that the roadway can also � ex back and forth, up and down during the seismic event.

Copyright (2011) California Department of Transportation, Photographer: Bill Hall

Photograph © Joseph A. Blum

Ironworkers work to remove cable from shackles used to lift 1,100-ton shafts for the new Oakland-San Francisco Bay Bridge suspension span’s 530-ft-tall tower.


Surprisingly, Nadar was studying civil engineering in San Francisco and was actually working within his academic building in 1989 when the earthquake hit. “� at experience had a huge impact on me,” he says regarding his work on the new bridge.

THE MAIN CABLE STAY� e entire length of the cable is one mile long, has a 2.6-foot diameter, and weighs 5,291 tons (10.6 million pounds) with 127 high-tensile strength wires contained within each of the 137 strands totaling 17,399 wires. Each strand of the cable took the construction crew two entire days to install. � e total sum of the main cable stay’s composition equals over 118 miles of 2 ½ inch diameter steel strands and more than 17,000 5mm diameter wires. Each 5mm wire alone can singly support the weight of a military-grade Hummer.

Once the cable was tensioned to support the weight of the deck pieces below, it was protected with a series of materials to guard it against 150+ years of corrosion. � e cable was covered with a zinc paste, and then enclosed by interlocking galvanized steel wires, or S-wire. Lastly, the cable and suspender ropes were painted with a highly elastic noxide paint that would further protect the cable and allow for necessary movement.

THE SAS CONSTRUCTION PROCESS� e bridge’s temporary supports were constructed to support the new bridge in parts. “If it seems like we built a bridge in order to build another one, you would be correct,” says Jackson of Caltrans. � e bridge deck pieces were constructed o� -site and brought to the bridge supports one-by-one. Overall, there are 28 deck sections of lengths

“This is a new project designed with revolutionary engineering that has now become the fi rst, longest SAS Bridge in the world that can withstand the next Big One.” - Richard Humiston, Global Market Director of WireCo WorldGroup


Crews pull the fi rst of 137 strands that will make up the main cable, each of those strands is made up of 127 steel wires.



spanning from 60 to 229 feet long and the weights vary from 559 to 1,669 tons each. Each roadway piece was then slid via a tram of rollers to their respective locations. � e main cable’s tower was then constructed.

Once the tower was completed and the main cable’s saddle, the main cable stay was then strung into place and installed wire by wire. Cable bands were used to temporarily bind together the wire bunch along the length of the entire cable. Suspender ropes were then hung from the main cable and su� ciently attached to the main cable. � e bridge’s weight was then transferred from the temporary supports to the main cable via the tensioning of the suspender ropes. In December of 2012, the temporary supports were in the process of being removed. Once � nished, the main cable will be covered and protected, leaving the work complete.

A giant crane barge called the Left Coast Lifter was a massive shear leg crane barge used to build the SAS. � e crane’s boom weighs 992 tons, runs 328 feet long, and can lift up to 1,873 tons, which is an amazing feat for a barge to do from the water. � e crane’s primary purpose was to bring steel to the site for the temporary support structure for the SAS. Secondarily, the crane helped to lift and place the deck segments from the eastbound and westbound roadways of the SAS.

Holloway Houston supplied HHiperlift slings capable of lifting up to 600 metric tons each to lift the bridge road way sections into place, some as large as 2.6 million pounds. HHiperlift High Performance synthetic round slings were supplied for lifting the sections of the bridge’s tower. Holloway Houston’s slings were manufactured with Honeywell � bers that can handle up to 4 million pounds at a time and are 80 percent lighter than traditional steel slings. “Spectra � ber’s lightweight strength makes it ideal for use in extreme lifting applications,” says Phil Wojcik, global business director for Honeywell’s Advanced Fibers and Composite business.

Four hydraulic compaction devices were used to compress the suspender ropes along the main cable. Compaction of the main cable stay began at the top of the 525-foot tall tower. � e compactors were then moved downward along the cable at 1.5 meters at a time. At each step, temporary galvanized carbon steel bands were wrapped around the cable’s strands. Permanent cable bands were then attached in place

of the temporary bands and were used as the permanent attachment locations for the suspender ropes. � e pressure of the strand compaction process went up to 9,350 pounds per square inch. Each steel compactor machine contained six hydraulic jacks and weighed 30,000 lbs.

MANUFACTURING THE SUSPENDER ROPESWireCo WorldGroup provided the entire shipment of the suspender wire ropes, the handrail cables, wire rope for the cat walk assemblies, and the tower tie back strands for the SAS. � e suspender ropes are galvanized steel of varying types and sizes including some with 6 strands and others with 8 strands. “Working with Caltrans was an e� cient and smooth process. A full-time inspector from Caltrans stayed at our manufacturing plant for a full year to oversee the quality of the wire ropes,” says Richard Humiston, Global Market Director of WireCo WorldGroup.

WireCo cables represent the majority of domestic made steel wire rope used in the bridge. Humiston adds, “We are proud of the fact that our company was chosen and of the jobs generated here in the US.”

While Caltrans developed a video of the construction of the bridge, they included footage of WireCo’s manufacturing process for the suspenders. � is footage will soon be available via a movie that is soon to be released about the construction of the SAS. � e San Francisco-Oakland Bay Bridge project was the largest shipment that WireCo WorldGroup had made at the time. A little bit later, WireCo started a larger order of suspender ropes for the Manhattan Bridge reconstruction project. Humiston says, “� ere was a time when we were shipping ropes to the East and West coasts at the same time. It started to get hectic, but we were able to handle the heavy load and to supply each bridge successfully, even ahead of schedule in some instances.”

Humiston summarized the Bay Bridge SAS by highlighting an interesting fact about bridge construction. For the older Manhattan Bridge, the wire ropes WireCo manufactured were designed replacements for the product that was originally installed on the bridge. For the revitalized San Francisco-Oakland Bay Bridge, Humiston says, “� is is a new project designed with revolutionary engineering that has now become the � rst, longest SAS Bridge in the world that can withstand the next Big One.” ❙


Ironworkers busy installing suspender ropes on the Oakland-Bay Bridge.

HHiperlift slings and Crosby Shackles lift the second set of sections of the massive new self-anchored suspension tower.


filtec precise inc.engineered yarnsengineered yarns

filtec

When Performance Matters!

EHP – Engineered Hybrid Power®

Scientifically Blended with Honeywell Spectra® Fiber

Filtec Precise ● 218 HWY 701 North Bypass ● Tabor City, NC 28463 USA ● Telephone: (910) 653-5200 ● Email: [email protected]

Proud Member of:Proud Member of:Proud Member of:Proud Member of:

J O I N T H E R E V O L U T I O N

Manheim, PA / 800-233-3010 Corona, CA / 800-317-7111

A Kito Group Company

When you face a tough job, you don’t want to mess around. You need a tool that works every time, every day. The Harrington LB lever hoist is built for those demanding applications, strong and reliable to get real jobs done right.

Harrington’s lever hoist is rated the best in the industry because it can take whatever you dish out. With a compact low-headroom design and a short steel handle with 15° recovery stroke, the LB will easily fit anywhere your work demands. This is the tool that works every day to finish the job—faster and easier, every time.

Heavy-duty, all steel construction

Nickel-plated, corrosion-resistant load chain

Compact design makes it a perfect fit for use in tight quarters

Easy to operate, transport and store

Revolutionary freewheeling for one-handed operation

Capacity range ¾ – 9 Ton

Join the Revolution and visit us at www.harringtonhoists.com

Do you want a tool or do you want a toy?

5285-1913_LBtool_HPH_wreD5b.indd 1 7/15/11 1:32 PM

The KEYthing between

YOU and 25,000volts is US.

Miller ISO/Link-ACProtect your workers, your company, and your investment from the single leading cause of electrical injury in any workplace: Accidental contact between crane booms and power lines. Rated to 25,000 VAC. Available in a number of configurations and load capacities.

Load Insulating Links

| 29 WHAT’S NEW | 31WRE CATALOG31 WIRE ROPE 44 BLOCKS48 CHAINS50 CLAMPS50 CLIPS52 EQUIPMENT52 EYE NUTS52 EYEBOLTS54 HOIST

54 HOOKS57 LINKS58 LUBRICANTS58 MASTER LINKS58 MILLIMETER

WIRE ROPE60 MISCELLANEOUS62 PRESS62 ROPE

62 SHACKLES64 SHEAVES64 SLEEVES64 SLINGS66 SOCKETS66 SWIVELS69 THIMBLES69 TURNBUCKLES72 WINCHES

WRE CATALOG GUIDE WRE WRE WRE

The design and fabrication experts at Lift-It Manufacturing have set another milestone in what could be considered the largest, synthetic bridle fabricated. The 108 ton rated bridle featured a 5 inch diameter masterlink. The link weighs 516 Lbs. and was selected to support and collect the two high capacity slings. The sling legs are high performance, Twin-Path® Extra Slings featuring K-Spec® high performance fiber.

Spatial and pressure calculations were done in the design development stages by Mike Gelskey, Jr. and the sling was

sold to Kennedy Wire Rope, Corpus Christi, TX. Lift-It CEO and founder, Michael Gelskey, Sr. remarked, “I am extremely proud of our team in completing this assembly. I have been in the rigging business for 40 years and have never seen a 5 inch masterlink. When they say everything is big in Texas, they are not kidding”. Lift-it Manufacturing is a worldwide leader in the supply of quality rigging and rigging training for 34 years. For more information contact Mike Gelskey, Jr. at 909.469-2251 or visit www.lift-it.com ❙

WHAT’S NEW LIFTIT SETS ANOTHER MILESTONE The design and fabrication experts The design and fabrication experts

WHAT’S NEW

WIRE ROPE EXCHANGE MARCH-APRIL 2013 29WIRE ROPE EXCHANGE MARCH-APRIL 2013 29

WHAT’S NEW US CARGO CONTROL INTRODUCES NEW PRODUCTS, NEW WEBSITE

US Cargo Control has increased its selection of wire rope products and re-vamped its web pages to better serve its customers.

An entire category of specialty steel cable products has been added, including compacted and swaged steel confi gurations, which off er greater strength than standard steel cable rope. Spin resistant wire rope cable has also been added to better serve industries such as excavating, logging, marine and dredging.

US Cargo Control’s VP of Marketing, Sarah Barron, says months of research went into determining what products needed to be added to round out the company’s wire cable category. “We were off ering a limited line of popular wire rope products, and we quickly learned after research and customer feedback, that we should be adding more confi gurations for particular industries,” said Barron. “Along with the spin resist wire rope, our new category also includes drilling line and sand line wire rope, which should satisfy the needs of those in industries such as well drilling.”

The addition of the new wire rope products also initiated the beginning of a re-design of the website pages to make it easier for customers to shop the wire and cable categories. Items are now separated fi rst by confi guration (i.e. 6x19, 6x37, 7x19, etc.), then customers can make their choices of wire type, such as bright wire, stainless steel, or galvanized. Check out US Cargo Control’s new website at www.USCargoControl. ❙

HARRINGTON HOISTS INTRODUCES HSC GRADE 100 SLING CHAIN

Harrington Hoists, Inc., recently released super strong Grade 100 Sling Chain, which is used to make chain slings when appropriate sling fi ttings are attached. Typical applications requiring sling chain are those involving the lifting of heavy loads or repetitive lifting situations in construction, foundries, steel mills, and heavy machining processes. Harrington Grade 100 Sling Chain is durable, fl exible and will tolerate a wide range of temperatures. It is exceptionally economical due to its long wear life and is easy to inspect, handle and store. This product is currently off ered in three chain diameters of 9/32” (7mm), 3/8” (10mm), and 1/2” (13mm). ❙

HARRINGTON HOISTS, INC. LAUNCHES FOOD GRADE ELECTRIC CHAIN HOISTS

Harrington Hoists, Inc. has also recently introduced their new line of Food Grade electric chain hoists known as the NER-FG Series. These hoists are available in capacities from 1/4 Ton through 2 Ton and are off ered in standard single speed and under-the-cover, variable frequency drive, dual speed. Food Grade hoists can easily be coupled with Harrington’s push, geared or motorized trolleys and are intended for use in any facility where incidental contact with product is a concern.

Harrington’s Food Grade hoists include the standard features of white epoxy paint for hoists, trolleys, hooks and suspenders, nickel-plated load chain, canvas chain container, food grade lubricants in compliance with FDA standards, and stainless steel and nickel-plated components. Many options are also available to meet individual application requirements such as a stainless steel bottom hook, stainless steel trolley wheels, stainless steel side guide rollers, nickel-plated shaft and suspender, stainless steel or plastic chain container, Nickel-diff used load chain, NEMA 4 pendant, pendant cover, stainless steel chain spring and limiting plate, stainless steel cushion rubber and a nickel-plated stopper.

NER-FG food grade hoists include all of the top quality features of Harrington’s standard N/ER three phase electric chain hoists such as “The Guardian” Smart Brake Technology - a failsafe maintenance-free brake with a 10 year warranty, extreme duty 60 minute rated motor and a completely sealed hoist body suitable for both indoor and outdoor applications.

Harrington Hoists, Inc. is a Kito Group Company located in Manheim, PA, Elizabethtown, PA and Corona, CA. and is a leading supplier and manufacturer of electric and air powered chain hoists, electric wire rope hoists, lever hoists, manual hand chain hoists, push and geared trolleys, overhead cranes, crane accessories and a full line of replacement parts. ❙

HARRINGTON HOISTS INTRODUCES HSC GRADE 100 SLING CHAIN

WHAT’S NEW FROM HARRINGTON HOISTS WHAT’S NEWINTRODUCES NEW PRODUCTS, NEW WEBSITE

US Cargo Control US Cargo Control

UNIVERSAL TROLLEY DESIGNED TO FIT VIRTUALLY ALL HOISTS

Columbus McKinnon Corporation (CMCO), a leading designer, manufacturer and marketer of material handling products is proud to present its Universal Trolley (UT) designed to fi t virtually all Columbus McKinnon electric and air chain hoists up to 3 ton capacities.

The CM Universal Trolley is competitively priced, designed for maximum versatility, provides long service life, and is CE compliant for global appeal. Because it can be used with a wide range of hoists, it will reduce the need to have multiple types of trolleys in inventory, thus alleviating stock constraints at distributorships. Its fl exible design allows the UT to be easily converted from a push to a hand-geared trolley confi guration. For more product details and specifi cation information, please check out www.cmworks.com/CMUniversalTrolley.

The Universal Trolley is a great addition to an already expansive Columbus McKinnon line of Trolleys and Beam Clamps. To learn more about the products and services off ered and to fi nd a list of distributors, please contact customer service at 1-800-888-0985 or go to www.cmworks.com. ❙

COLUMBUS MCKINNON ANNOUNCES INSTOCK GUARANTEE

Columbus McKinnon is also very proud to present its In-Stock Guarantee (ISG).

The In-Stock Guarantee is a company-wide commitment to ship our most popular chain and forged attachment products in 3 days. If any ISG product is not shipped on time, Columbus McKinnon will off er a 5% discount and free shipping on a future rigging order.

The In-Stock Guarantee business model has been developed from the top down, with a focus on providing our Channel Partners and Distributors with best-in-class service on the chain and forged attachment products that they use every day.

“Today, we are changing the way we do business. These changes not only aff ect CMCO and our Channel Partners, but the entire material handling industry. We are committed, and now prepared, to ship our most popular chain and forged attachment products in days, not weeks – and we guarantee it. This is our In-Stock Guarantee. This is not a promotion, but a new industry-changing way of doing business,” states Tim Tevens, CMCO President and Chief Executive Offi cer.

Currently, Columbus McKinnon off ers more than 135 chain and rigging product that are guaranteed to be in stock and ready to ship. ❙


UNIVERSAL TROLLEY DESIGNED TO FIT VIRTUALLY ALL HOISTS

Columbus McKinnon Corporationleading designer, manufacturer and marketer of material handling products is proud to present its Universal Trolley (UT) designed to fi t virtually all electric and air chain hoists

competitively priced, designed for maximum versatility, provides long service life, and is CE compliant for global appeal. Because it can be used with a wide range of hoists, it will reduce the need to have multiple types of trolleys in inventory, thus alleviating stock constraints at distributorships. Its fl exible design allows the UT to be easily converted from a push to a hand-geared trolley confi guration. For more product details and specifi cation information, please check out www.cmworks.com/CMUniversalTrolley.

expansive Columbus McKinnon line of Trolleys and Beam Clamps. To learn more about the products and services off ered and to fi nd a list of distributors, please contact customer service at 1-800-888-0985 or go to www.cmworks.com.

COLUMBUS MCKINNON ANNOUNCES INSTOCK GUARANTEE

Columbus McKinnonalso very proud to present its In-Stock Guarantee (ISG).

to ship our most popular chain and forged attachment products in Columbus McKinnon will free shipping

developed from the top down, with a focus on providing our Channel Partners and Distributors with best-in-class service on the chain and forged attachment products that they use every day.

These changes not only aff ect CMCO and our Channel Partners, but the entire material handling industry. We are committed, and now prepared, to ship our most popular chain and forged attachment products in days, not weeks – and we guarantee it. This is our In-Stock Guarantee. This is not a promotion, but a new industry-changing way of doing business,” states President and Chief Executive Offi cer.

135 chain and rigging product that are guaranteed to be in stock and ready to ship.

expansive Columbus McKinnon line of Trolleys and Beam Clamps. To learn more about the products and services off ered

Jergen’s Inc. is proud to announce that the company has passed its Quality Suppliers List for Manufacturers (QSLM) audit which was conducted on January 9, 2013. The purpose of the audit was to maintain the company’s approval as a supplier of Quick-Release Pins to the US Department of Defense. The criteria for passing the audit is similar to ISO9001:2008 standards, with more emphasis on certifi cation and traceability to raw material physical and chemical properties.

By passing this important and comprehensive audit, Jergens, Inc., continues to operate as an approved supplier of Quick-Release Pins for use by the United States Dept. of Defense and all other federal entities which utilize these unique locking pins.

Jergens Kwik-Lok®, Quick-Release Pins were designed provide fast, easy, positive engagement and high holding strength for applications requiring frequent, repetitive use. Simple, smooth operation makes Jergens Kwik-Lok® Pins an ideal replacement for detent, clevis and cotter pins. Beyond military uses, other Kwik-Lok® applications include general industrial/manufacturing, aviation and medical, recreational and marine equipment.

The 17-4 PH-grade stainless steel construction of Jergens Kwik-Lok®, Quick-Release Pins permit installation in corrosive, wet and other harsh or caustic operating environments. Other available materials and fi nishes include heat-treated alloy steel and cadmium-plating.

More information about Jergens Kwik-Lok®, Quick-Release Pins information are available at www.jergensinc.com/site/showcase_KLP. ❙

WHAT’S NEW JERGENS, INC. PASSES RIGOROUS QSLM QUALITY SUPPLIERS LIST FOR MANUFACTURERS AUDIT

UNIVERSAL TROLLEY DESIGNED UNIVERSAL TROLLEY DESIGNED

WHAT’S NEW FROM COLUMBUS MCKINNON

[WHAT’S NEW]

WHAT’S NEW NCCCO LAUNCHES ONLINE CERTIFICATION VERIFICATION SYSTEM

The National Commission for the Certifi cation of Crane Operators (NCCCO) recently launched an online system that allows the credentials of CCO-certifi ed individuals to be instantly verifi ed via the Internet.

Access to the new system, known as Verify CCO Online or “VCO,” is through the NCCCO website www.nccco.org or via a special address, www.verifycco.org. After registering and logging in, users simply enter a certifi cation number and the system provides a listing of all associated certifi cations, together with their expiration dates. VCO can be accessed at any time from nearly every device with an Internet connection, including computers, smartphones, and tablets.

“Providing this access to the NCCCO national certifi cation database allows an individual’s CCO certifi cations to be checked with a few keystrokes, 24/7, 365 days of the year,” said NCCCO Commission Chairman, Ellis Vliet. The service is being provided completely free of charge to registered users, he said.

“VCO is expected to be particularly useful in cases where employers are presented with a photocopy of a CCO certifi cation card which, by itself, is not suffi cient proof of certifi cation,” said NCCCO Executive Director, Graham Brent. But he also cautioned that, similarly, printouts from the VCO system are also not considered valid proof of certifi cation by themselves and do not replace an offi cial CCO photo ID certifi cation card.

NCCCO issues separate CCO certifi cation cards for operators, riggers and/or signalpersons, and crane inspectors, with separate certifi cation numbers and expiration dates. The comprehensive VCO system not only lists the types of equipment that operators are certifi ed on but also indicates if they have additional CCO certifi cations and displays all this certifi cation data on a single screen. This feature will help employers maintain up-to-date records of their employees and ensure their compliance with all current and future governmental requirements.

“With OSHA’s November 2014 deadline for crane operators working in construction to be certifi ed fast approaching, we expect this system to become an increasingly important tool for employers and government entities seeking to verify operators’ certifi cation status,” Brent added. ❙

WHAT’S NEWCERTIFICATION VERIFICATION SYSTEM


WIRE ROPEWRE CAtALOG

LISTER'S INDEX ON PAGE 74.

1/64'' Wire RopesiZe QtY. desCriPtiOn PriCe Lister ZOne

1/64" 250 1" x 1.54" Swivel Hoist Ring Part (23106) American Drill Bushing WLL 10,000lb

$45.00 187 CA

1/64" 13 Little Mule Lineman's Hoist Model 344B $125.00 421 SC

1/64" 1 Little Mule Cable Hoist Model 404WNA $90.00 421 SC

1/64" 2000' 6 X 25 BIWRC XIP- CHINA 2.50' 35 MD

3/64'' Wire RopesiZe QtY.. desCriPtiOn PriCe Lister ZOne

3/64" 100 X 5000'

3/64 7X7 GAC $0.02 35 MD

3/64" 68 x 10,000

7x7 opaque white vinyl coated to 1/16 $0.02 35 MD

3/64" 10,000 7x7 clear vinyl coated to 3/32 $0.02 35 MD

3/64" 1,246' 3/64" - 1/16" 7x7 304 SSAC NYL COATED - IMPORT

$.25/FT 420 FL

3/64" 14 x 20,000'

3/64" 7x7 GAC (Korean) $0.01 276 OH

3/64" 54 x 5,000'

3/64" 7x7 GAC coated to 1/16" Clear PVC (Korean)

$0.02 276 OH

3/64" 200 1X7 GALV STRAND DOMESTIC $0.02 359 IL

3/64" 10,000 1X19 LHL IPS GALV STRAND $0.05 359 IL

3/64" 40725 7X7 GAC DOMESTIC $0.04 359 IL

3/64" 570 3/64-1/16 7X7 GAC, PVC BLACK $0.04 359 IL


1/16" 4311 1/16" x 1/8" 7x7 Stainless Stl. Nylon Coated (cert)

.08/FT 178 OH

1/16" 7250 1/16" x 1/8" 7x7 Stainless Steel Nylon Coated (cert)

$0.08 178 OH

1/16" 10570 1/16" x 3/32" 7x7 Stainless Steel Nylon Coated (Import )

.07/FT 178 OH

1/16" 62884 1/16" 7 X 7 SSAC TYPE 304 COM GRADE NYL CTD TO 3/32" CLEAR 100-00060

.123 PER FT 294 OH

1/16" 400 x 250' 1x7 Clear green vinyl coated iron seizing to 1/8 galv.

5.00 rl 35 MD

1/16" 15,000 1/16-1/8 7X7 CLEAR VINYL COAT 5,000' REELS ITEM 004049

$0.03 526 MN

1/16" 2 x 20,000'

1/16" 1 x 7 GAC (Korean) $0.01 276 OH

1/16" 6000 "1/16 - 3/32 1X19 GALV PVC CLEAR $0.05 359 IL

1/16" 29225 7X7 GAC DOMESTIC $0.05 359 IL

1/16" 10702 7X7 GAC MIL-W-83420 $0.07 359 IL

1/16" 886 7X7 TIN/ZINC MIL-W-83420 $0.38 359 IL

1/16" 15850 1/16-1/8" 7X7 GAC, PVC GRAY $0.06 359 IL

1/16" 7600 .06" 1x19 GALV STRAND $0.02 359 IL

1/16" 4 "1 X 19, RRL, TYPE 316 STAINLESS, 5,000' PER REEL,

$149.98/5,000/REEL

541 FL


5/64" 13,000 1X7 GALV STRAND DOMESTIC $0.03 359 IL

5/64" 5000 1.8MM-7/64 7X7 GAC PVC WHITE $0.08 359 IL

5/64" 5000 1.8MM-9/64 7X7 GAC, PVC WHITE $0.09 359 IL


3/32" 60 RL 3/32 7X7 V.C. TO 5/32 X 250' RL $12/RL 35 MD

3/32" 3195 3/32" x 3/16"7x7 GAC Vinyl Coated (Import)

.08/FT 178 OH

3/32" 20000' 3/32 7X19 TYPE 304 STAINLESS STEEL KOREAN

.11/ft 29 NY

3/32" 4,000 1x19 white nylon coated to 1/8 SS $0.09 35 MD

3/32" 3,000 7x7 white nylon coated to 3/16 SS $0.10 35 MD

3/32" 2 x 5000 7x7 nylon coated to 1/8 galv. $0.04 35 MD

3/32" 2 x 5,000' 7 x 19 GAC Nylon coated to 3/16 $0.05 35 MD

3/32" 80000 "7x7 SSAC T304 1/16 TO 3/32 NYLON 0.125/ft 60 RI

3/32" 11 x 5000' 3/32 7X7 S/S Understrength .04' 35 MD

3/32" 49,750 ft 3/32" 7X7 SSAC T304 .06/ft 355 NY

3/32" 335 3/32X250' 7X7 GALVANIZED ITEM 002072

$6.25 526 MN

3/32" 268 3/32-3/16 X 500' 7X7 GALV CLEAR VC ITEM 004103

$27.35 526 MN

3/32" 4 x 5,000' 3/32" 7x7 GAC coated to 5/32" Black PVC (Korean)

$0.03 276 OH

3/32" 7 x 5,000' 3/32" 7x7 GAC coated to 3/16" Clear PVC (Korean)

$0.03 276 OH

3/32" 1,086,199 1X19 GALV STRAND DOMESTIC $0.04 359 IL

3/32" 35,900 1X19 GALV STRAND $0.03 359 IL

3/32" 8680 3/32 - 1/8 1X19 GALV STRAND PVC $0.04 359 IL

3/32" 60032 7X7 GAC DOMESTIC $0.06 359 IL

3/32" 700 7X7 TIN/ZINC MIL-W-83420 $0.21 359 IL

3/32" 7300 7X19 GAC DOMESTIC $0.14 359 IL


3/32" 1500 7X19 GAC MIL-W-83420 $0.20 359 IL

3/32" 1000 3/32-1/8" 7X7 GAC, PVC ORANGE $0.05 359 IL

3/32" 2870 3/32-5/32 7X7 GAC, PVC GREEN $0.05 359 IL

3/32" 334 3/32-3/16 7X7 GAC, PVC BLUE $0.06 359 IL

3/32" 858 3/32-3/16 7X7 GAC, PVC BLACK $0.02 359 IL

3/32" 5 "1 X 19, RRL, TYPE 304, STAINLESS, 5,000' PER REEL,

$295.00/5,000'/REEL

541 FL


1/8" 1,450 1/8", 7x19 Strand, RRL, Monel, DRY, Carolina S&W, New

$0.75 187 CA

1/8" 30ea. 7 x 7 GAC 10,000 ft reels China surplus $250.00 427 CA

1/8" 2,640 1/8", 7X19, RRL, STAINLESS 302, CAROLINA

$0.16 187 CA

1/8" 4 x 1,000' 7 x 7 White Vinyl Coated to 3/16 GAC $0.04 35 MD

1/8" 4000 ft 1/8" 7X19 SSAC BLACK VINYL COATED TO 3/16"

.60/ft 355 NY

1/8" 990 feet 1/8" 7x7 GAC - Import .05/ft 420 FL

1/8" 1,456' 1/8" - 3/16" 7x19 304 SSAC BLUE NYL COATED

$.75/FT. 420 FL

1/8" 403 1/8-3/16X250' 7X19 CLEAR VC GALV ITEM 010132

$21.66 526 MN

1/8" 100 1/8X500 STAINLESS 7X19 ITEM 016123

$75.20 526 MN

1/8" 4 x 10,000'

1/8" 7x19 GAC coated to 5/32" Clear PVC (Korean)

$0.05 276 OH

1/8" 1659 7x19 PHOS BRONZE USA $0.81 359 IL

1/8" 16430 7X37 GALV CABLE $0.41 359 IL

1/8" 12728 1/8-3/16 7X7 GAC, NYLON CLEAR $0.12 359 IL

1/8" 407 1/8-5/32 7X19 GAC, PVC MATTE $0.09 359 IL

1/8" 3600 1/8-3/16 7X19 GAC, PVC WHITE $0.03 359 IL

1/8" 309,825 3.5mm 7X7 GAC $0.02 359 IL


5/32" 116 5/32X500' 7X19 GALV ITEM 003143 $35.20 526 MN

5/32" 70 x 5,000'

5/32" 7x19 Stainless Steel (Type 304) $0.15 276 OH


$0.06 276 OH

5/32" 19,480 5/32 - .230/.236 7x19 GAC Nylon $0.18 359 IL

5/32" 5500 7X7 GAC DOMESTIC $0.09 359 IL

5/32" 4000 7X7 GAC $0.03 359 IL

5/32" 15000 7X7 GAC ON 1000' REELS $0.04 359 IL

5/32" 267676 7X19 GAC $0.01 359 IL

5/32" 18500 5/32-7/32 7X7 GAC, PVC CLEAR $0.07 359 IL

5/32" 39747 5/32-.209/.215 7X19 GAC, NYLON $0.15 359 IL


3/16" 466# on reels

4.15 mm, 7 x 7 const., zinc coated .04' 369 Ohio

3/16" 1,609# on reels

4.4 mm, 7 x 7 const., zinc coated $0.04 369 Ohio

3/16" 5000 3/16" x 1/4" 7x19 GAC Green Vinyl Coated ( Import )

.10/FT 178 OH

3/16" 2500 3/16" x 1/4" 7x19 GAC Green Vinyl Coated ( Import )

.10/FT 178 OH

3/16" 5000 3/16" x 5/16" 7x19 GAC Vinyl Coated ( Import )

.10/FT 178 OH

3/16" 5087 3/16" x 5/16" 7x19 GAC Vinyl Coated ( Import )

.10/FT 178 OH

3/16" 70000' 3/16"-1/4" 7X19 GAC WHITE PVC COATED KOREAN, 14 @ 5000'

.075/ft 29 NY

3/16" 3886 3/16 6X36 FC POR 171 BC

3/16" 2200 3/16 - 1/4 7X7 GAC CLEAR COAT POR 171 BC

3/16" 64ea. 7 x 19 GAC 5,000 ft reels China surplus $200.00 427 CA

3/16" 7 X 3,000 3/16", 7x19, Type 304 SS, Loos & Co, Mil W-83420 Rev E Certs

$0.24 187 CA

3/16" 1000 6X36 XIP IWRC BRT Right Lang Lay $3.76 54 CA

3/16" 55,000 ft "3/16"" 7X7 Cable Vinyl Coated to 1/4"" .12/ft 121 MS

3/16" 14,325 feet

3/16" 7x7 GAC - Import .07/ft 420 FL

3/16" 275' 3/16" - 1/4" 7x19 304 SSAC NYL COATED - DOMESTIC

$.90/ft. 420 FL


$0.07 276 OH

3/16" 79 6X19 RRL IPS GALV FC $0.17 359 IL3/16" 800 6X19 RRL PHOS BRONZE FC $0.40 359 IL3/16" 750 3/16 - 5/16 6x19 FC Phos Bronze Coated $1.63 359 IL3/16" 600 7x7 GAC Domestic $0.13 359 IL3/16" 12,000 7x7 GAC ON 1,000' REELS $0.06 359 IL3/16" 1329 7X19 GAC DOMESTIC $0.04 359 IL



3/16" 965 3/16 - 1/4 7X7 GAC, PVC WHITE $0.11 359 IL

3/16" 5000 3/16 - 7/32 1X19 GALV PVC BLACK $0.16 359 IL

3/16" 150 1X37 GALV STRAND $0.12 359 IL

3/16" 8 REELS " 1 X 19 LEFT REGULAR LAY, TYPE 304, STAINLESS, 5,000 FT.

$1,299.00/5,000' RL

541 FL


7/32" 68,120' on reel


7/32" 16,866' on reel

5.2 mm wire rope, 7 x 7 const, zinc coated

.06' 369 Ohio

7/32" 3,982' 1x19 type 304 SS 1,000' min. $0.17 35 MD

7/32" 905 7/32" 7x19 Galv Domestic .14/Ft 421 SC

7/32" 4500 7/32" 7 x 19 Galv. Aircraft Cable Imp. $0.08 351 WI


1/4" 216,000' 6.7 mm, 7 x 7 x 19 const., zinc coated .08' 369 Ohio

1/4" 70000 1/4 6X19 BIWRC IPS $0.08 35 MD

1/4" 5087 1/4" 6x19 IPS RRL FC Import .135/FT 178 OH

1/4" 54,473' on 6.3 mm, 7 x 19 const., zinc coated .08' 369 Ohio

1/4" 30,000 ft 1/4" - 1x7 Guy Strand Galv. $0.13 156 SK

1/4" 20,000' 1/4" 6x36 PC EIPS Drawn galvanized Dry .19/ft 50 TX

1/4" 25,000' 1/4" 6x31 PC EIPS DOMESTIC .36/ft 50 TX

1/4" 1,200 1/4", 6 X 19. PPC, RRL, Phos Bronze, dry, domestic, new

$0.75 187 CA

1/4" 100000 1/4 1x 7 new galv strand $0.11 7 TN

1/4" 10,000 1/4", 1x7, Galv., Strand EHS Strand Domestic

$0.07 187 CA

1/4" 300x25' 1/4 7x19 v/c to 5/16 2.50 ea. 35 MD

1/4" 500 7x19 black nylon coated to 5/16 $0.19 35 MD

1/4" 5000 6x31 IWRC RRL EIPS, WireCo, Colored Strand, A1 Lube, 1 reel - 5,000 ft.

$0.65 187 CA

1/4" 18 1/4" 7 x 19 GAC x 125ft. with 5/8" x 1" stop ea. end

$14.00 351 WI


1/4" 3 X 500' 3 X 500' 1/4 1X19 S/S TYPE316 $0.68 35 MD

1/4" 48 1/4X250' 6X19 FC BRT ITEM 019212 $31.00 526 MN

1/4" 2 x 5,000' 1/4" 7x7 GAC (China) $0.08 276 OH

1/4" 1 x 2,500' 1/4" 6x19 Stainless Steel Type 304 (Korean)

$0.25 276 OH

1/4" 9405 8X19 RRL TRACTION GALV PO $0.36 359 IL

1/4" 297 6x25 RRL IPS BRT FC $0.18 359 IL

1/4" 2830 6X19S RRL EIPS BRT IWRC D $0.20 359 IL

1/4" 2780 6X19 LHRL IPS BRT FC $0.11 359 IL

1/4" 6355 6X19S LHRL EIPS IWRC GALV $0.19 359 IL

1/4" 9644 6X19 LHRL EIPS BRT IWRC $0.19 359 IL

1/4" 105 6X36 RHRL EIPS GALV IWRC $0.28 359 IL



1/4" 40,000 "1/4 - 9/32 7X7 GAC PVC BLACK CHINESE

$0.11 359 IL

1/4" 15,000 1/4 - 9/32 7X7 GAC PVC BLACK KOREAN

$0.18 359 IL

1/4" 180 1/4 - 5/16 7X7 GAC PVC YELLOW $0.09 359 IL

1/4" 10,500 1/4 - 5/16 7X7 GAC HDPE BLACK $0.15 359 IL

1/4" 1200 7x19 GAC (On broken reel) $0.10 359 IL

1/4" 1 "1 x 19 LEFT REGULAR LAY, TYPE 304 STAINLESS STEEL

$2,653.00 541 FL

1/4" 4 x 1500' 1/4" 6x19 IPS IWRC RRL Bright $.09 ft 50 TX


3/8" 4000 3/8 6X19 B.F.C. KOREAN $0.25 35 MD

3/8" 56.500' on reel

9.3 mm wire rope, 7 x 19 const, zinc coated

$0.11 369 Ohio

3/8" 2 X 1,000 3/8", 7 X 19, Stainless Type 304, Loos & Co

$1.00 187 CA

3/8" 10000 3/8-1 1X7 GALV STRAND PVC COATED 5 X 2000FT

POR 171 BC

3/8" 10,000 3/8" 6X31 FC BRT - DOMESTIC $0.40 221 WA

3/8" 285 7x19 clear vinyl coated to 1/2 galv. $0.40 35 MD

3/8" 125 x 25' 6x19 BFC x 25' $0.10 35 MD

3/8" 750 3/8 7 x 19 GAC Nylon to 7/16 $0.50 35 MD

3/8" 3,400 3/8 6x25 G F C Korean $0.29 35 MD

3/8" 400 3/8" 7 Flex PFV Coated Orange Domestic 1.87/Ft 421 SC

3/8" 150 3/8", 7X19, GALV, CALWIRE $0.15 187 CA

3/8" 1X5100, 1X2500

3/8", 7X7, RRL, GALV, CALWIRE, Strand bridge rope

$0.13 187 CA

3/8" 1,000 3/8", 6X19, FC, RRL, EIPS, BRT, KOREAN

$0.29 187 CA


3/8" est. 800 3/8", 6X36, FC, RRL, IPS, GALV, BETHLEHEM

$0.95 187 CA

3/8" 600 3/8", 6X36, FC, RRL, EIPS, BRT, A2, WIRECO

$0.73 187 CA

3/8" 900 3/8", 6X27, IWRC, STAINLESS 304, CALWIRE

$0.75 187 CA

3/8" 2 X 1,000 3/8", 7X19, STAINLESS 304, LOOS & CO

$0.75 187 CA

3/8" 600 3/8", 7X19, RRL, STAINLESS 302, CAROLINA

$0.75 187 CA

3/8" 2,519 6x19 PPC Galv., Korea $0.25 275 OR

3/8" 3 X 5000' 6X26WS RRL IWRC EIPS BRT- KOREAN $0.40 63 TX

3/8" 3280 ft. Diepa PZ 371 / 8.99 BS / ordinary lay / plasticized core

0.99 ft. 427 CA


3/8" 1171' 3/8" - 7/16" 7x19 GAC PVC CTD - Import .50 per ft 420 FL

3/8" 1 @ 150' & 1 @ 380'

3/8" - 15/32" 7x19 GAC Space Lay - Domestic

$2.65 per ft. 420 FL

3/8" 1 x 4,500' 3/8" 6x36 Stainless Steel IWRC (Korean) $0.85 276 OH


$0.60 276 OH


$0.72 276 OH

3/8" 1 x 2,500' 3/8" 6x25 IWRC Galv (China) $0.23 276 OH

3/8" 75 8X19 RRL TRACTION BRT SIS $0.44 359 IL

3/8" 5000 8X19 RRL IRON BRT SISAL CORE $0.68 359 IL

3/8" 3605 8X19 RRL IRON BRT SISAL CORE $0.57 359 IL

3/8" 6182 10.0mm 8X19 RRL EHS BRT SISAL $0.60 359 IL

3/8" 67 9MM 6X36 RRL EIPS BRT IWRC $0.46 359 IL

3/8" 4000 6X25 RRL IPS BRT FC $0.33 359 IL

3/8" 5000 6X25 RRL IPS BRT FC $0.40 359 IL

3/8" 636 6X25 RRL EIPS GALV IWRC $0.44 359 IL

3/8" 110 6X37 RRL IPS BRT FC USA $1.11 359 IL

3/8" 5000 6X36 RRL EIPS BRT IWRC $0.41 359 IL


3/8" 425 6X15 RRL IPS BRT PC $0.31 359 IL


3/8" 50 19X7 RRL EIPS BRT $0.32 359 IL


7/16" 350' 6X26 IWRC XIP RRL BRT - 0741VU1068 $0.05 95 WA

7/16" 930 7/16", 6x19, PPC, RRL, Phos. Bronze, A-1, Domestic, New

$1.15 187 CA

7/16" 500 7/16 6x7 FC galv Korean $0.20 54 CA

7/16" 5000 7/16" 6x19 FC, Galv., A-Lube, Korean $0.29 54 CA

7/16" 8050 7/16 6x36 IWRC Brt,Chinese,Poor Preforming

$0.22 54 CA

7/16" 4664' 7/16" 6X33 RRL EIP F.C. MADE IN USA 1@4000 1@664'

.60/ft 29 NY

7/16" 4100' 7/16"6X25 RRL EIP FCKOREAN 1@4100'

.27/ft 29 NY

7/16" 5000' 7/16" 6X26 COMPACTED 6 IWRC KO-REAN, 1 @ 5000'

.40/ft 29 NY

7/16" 669' 7/16" 6X7 SANDLINE BLACK LRL IPS F.C. KOREAN, 1 @ 669'

.14/ft 29 NY

7/16" 500 7/16 DYPAC 18 .55' 35 MD

7/16" 4361' VEROPRO 8 Compact RRL IWRC GALV PPI (12mm)

$1.22 303 Texas


$1.22 303 Texas

7/16" 235 7/16" 19x7 IWRC Rotation Resistant Import

.58/Ft 421 SC

7/16" 300 7/16", 6X19, FC, RRL, IPS, GALV, DRY, UNION

$0.52 187 CA

7/16" 5,970 7/16", 6X21, FC, RRL, EIPS, BRT, A1, CALWIRE

$0.68 187 CA

7/16" 6,000 7/16", 6X36, FC, RRL, EIPS, BRT, A1, BRIDON, Colored strand

$0.75 187 CA

7/16" 5,000 7/16", 6X36, FC, RRL, EIPS, BRT, DRY, BRIDON, Colored strand

$0.84 187 CA

7/16" 4,850 7/16", 6X19, IWRC, STAINLESS, DOM. $0.97 187 CA

7/16" 200 7/16", 6X19, IWRC, STAINLESS, DOM $1.15 187 CA


7/16" 1240 12mm 34x7 Python Lift BRT RRL 1960 grade

1.33 per foot 105 WA



7/16" 4917' 7/16" 6X25 FC RRL - CHINESE (1462511112)

.23' 139 PA

7/16" 2590' 7/16" 6X37 FC RRL - KOREAN (1463711112)

.35' 139 PA


WIRE ROPE WRE CAtALOG

Canada

LISTER'S INDEX ON PAGE 74.34 MARCH-APRIL 2013 WIRE ROPE EXCHANGE



7/16" 3265 6X25 RRL IPS BRT FC $0.31 359 IL

7/16" 1710 6X25 RRL IPS BRT FC $0.35 359 IL

7/16" 4119 6X36 RRL IPS BRT FC $0.50 359 IL


7/16" 3374 1X7 GALV EHS CLASS A USA $0.39 359 IL

7/16" 68 G43 EYE GRAB HOOK $2.42 359 IL

7/16" 1 x 4950' 7/16" 6x19S EIP PC A-1 Domestic $.70 ft 50 TX


1/2" 1500' 1/2" PYTHON HOIST 34X7 NON-ROTATING - CALIBRATED 1960 GRADE

$1.38 32 IN

1/2" 800' 1/2" PYTHON HOIST 34X7 NON-ROTATING - CALIBRATED 1960 GRADE

$1.38 32 IN

1/2" 2,075' 1/2" PYTHON NORMALIFT 36X7 ROTATION-RESISTANT - CALIBRATED 1960 GRADE

$1.19 32 IN

1/2" 55,856' on reel


1/2" 2000 1/2 8X25 BIWRC XIP KOREAN $0.60 35 MD

1/2" 2 1/2" X 500' 6X25 WC RRL XIP PFV 300-01410

.94 per FT 294 OH

1/2" 3,400 6x37 IWRC bad preformed Stainless $0.75 35 MD

1/2" 1,355 6x25 IWRC Left Lay Stainless $1.20 35 MD

1/2" 1500 6x7 BFC Heavy lube $0.19 35 MD

1/2" 9,190 "6x26 IWRC COMPACTED STRAND BRT EIPS 1/2 A2(Israel)

1.26/ft 60 RI

1/2" 10000 "6x36 IWRC COMPACTED STRAND BRT EIPS 1/2 A2 (Israel)

1.32/ft 60 RI

1/2" 8900 "19x19S COMPACTED STRAND BRT EIPS 1/2 A2 (Israel)

1.65/ft 60 RI

1/2" 3679' VEROTOP Compact 35x7 GALV 2160N/mm2 RHLL (12.5mm)

$1.43 303 Texas

1/2" 190 1/2" 7x7x7 Galv Cable-Laid 1.00/Ft 421 SC

1/2" 200 1/2", 6X19, FC, RRL, IPS, BRT, A1, B & B, Yellow strand

$0.79 187 CA

1/2" 1,200 1/2", 6X19, IWRC, RRL, EIPS, BRT, A2, KOREAN

$0.50 187 CA

1/2" 2X10,000 1/2", 6X19, IWRC, EIPS, BRT, DRY, WIRECO, Special made

$0.88 187 CA

1/2" 10 X 120 1/2", 6X19, IWRC, RRL, EIPS, BRT, PAULSEN

$0.88 187 CA

1/2" 200 1/2", 6X25, FC, RRL, EIPS, BRT, A1, ROCHESTER, Colored Strand

$0.79 187 CA


$0.50 187 CA

1/2" 2X600,1X700

1/2", 6x31, IWRC, RRL, EIPS, BRT, A2, CALWIRE

$1.06 187 CA

1/2" 1X870, 1X300

1/2", 6X31, IWRC, RRL, EIPS, BRT, CALWIRE

$1.06 187 CA

1/2" 870 1/2" 6X31, IWRC, RRL, EIPS, BRT, A1, CALWIRE

$1.06 187 CA

1/2" 3 X 1,000 1/2", 6X36, FC, RRL, IPS, GALV, KOREAN

$0.54 187 CA

1/2" 1,000 1/2", 6X37, FC, RRL, IPS, GALV, KIS/PACWEST

$0.54 187 CA

1/2" 1 X 5,000 1/2", 6X19, IWRC, EIPS, BRT, DRY, WIRECO, Special made

$0.88 187 CA

1/2" 2 X 2,500 1/2", 6X19, IWRC, EIPS, BRT, DRY, WIRECO, Special made

$0.88 187 CA

1/2" 3,500 6x25 RR lang lay, Korea $0.42 275 OR

1/2" 17,900 FT NEW 1/2" 6X31 IWRC COMPACT (KIS WIRE) 8X1300 FT, 10 X 750 FT

OFFERS 77 BC CAN

1/2" 60000 3 x 19 Torque Balance Galvanized, EIPS, Domestic, NEW; 2 reels x 30,000 ft.

$1.00 187 CA

1/2" 2 X 5000' 6X26WS RRL IWRC EIPS GALV - KOREAN

$0.52 63 TX

1/2" 1x2500' NEW SURPLUS. 6x19 Seale Polycore, Galvanized, Right Regular Lay, Lube Type Dry

$.44/FT, $1100

298 CA

1/2" 5,000 FT 1/2" - 9/16" 6 X 36 IWRC Galv. Clear PVC Coated Cable

.30 /FT 248 MB CAN

1/2" 4000 FT "1/2"" 6X25 RRL POWER PAC 1.94 / FT 525 CAN

1/2" 1222 FT "1/2"" 6X25 RRL POWER PAC 1.94 / FT 525 CAN

1/2" 1 x 2,500' 1/2" 6x25 Galv IWRC (China) $0.30 276 OH



1/2" 6250 8X19 EHS BRT SISAL CORE $0.77 359 IL


1/2" 5000 8X19 RRL EHS GALV PC $0.88 359 IL

1/2" 8475 12MM 6X36 LHRL EIPS BRT IWRC $0.33 359 IL

1/2" 1060 6X25 RRL IPS GALV FC $0.52 359 IL

1/2" 800 6X19S RRL IPS BRT FC $0.50 359 IL


1/2" 5000 6X19S RRL IPS BRT FC $0.55 359 IL

1/2" 134 6X26 RHLL EIPS BRT IWRC $0.54 359 IL

1/2" 173 1/2 - 5/8 6X25 GALV PVC BLACK $1.35 359 IL

1/2" 285 COMPACT 619 1960 GRADE $1.04 359 IL

1/2" 158 1/2 X 4-1/2 PLAIN EYEBOLT $1.55 359 IL


9/16" 421' 9/16" PYTHON LIFT 34X7 NON-ROTAT-ING COMPACTED LLL - 1960 GRADE

$1.43 32 IN

9/16" 634' 9/16" PYTHON COMPAC18 18X19 ROTATION-RESISTANT 1960 GRADE

$0.88 32 IN

9/16" 2 x600, 1 x300

9/16", 6x25, PPC, RRL, Phos. Bronze, Dry, Domestic, New

$2.75 187 CA

9/16" 4499' 14MM 8X36 RHRL EIP IWRC KOREAN , 1 @ 4599'

.46/ft 29 NY

9/16" 7900 9/16" 6X26, IWRC, RIGHT LANG, PLAS-TIC IMPREGNATED

POR 171 BC

9/16" 515 6x7 GFC Korean $0.28 35 MD

9/16" 4,000 & 1,100

6x25 BIWRC Lang Korean $0.44 35 MD

9/16" 30,250 "34x7 WSC COMPACTED STRAND NR BRT 9/16 A2 (Israel)

1.93/ft 60 RI

9/16" 6000' VEROPOWER 6 Compact & Swaged RRL IWRC PPI

$1.40 303 Texas

9/16" 2623' VEROPOWER 6 Compact & Swaged RRL IWRC PPI (14mm)

$1.40 303 Texas

9/16" 4360 9/16" 6x7 F/C Galv Import .60/Ft 421 SC

9/16" 275,000 9/16 6x7 FC Sandline KIS $0.45 54 CA

9/16" 5,000 9/16", 6X25, FC, RRL, IPS, BRT, A1, CALWIRE

$1.03 187 CA

9/16" 200 9/16", 6X25, FC, RRL, EIPS, BRT, A1, PAULSEN

$0.89 187 CA

9/16" 150 "9/16"", 6X25, FC, RRL, EIPS, BRT, D, PAULSEN

$0.89 187

9/16" 2 X 600 9/16", 6X25, FC, RRL, IPS, BRT, A1, UNIVERSAL

$0.79 187 CA

9/16" 5,000 9/16", 6X36, FC, RRL, EIPS, BRT, A1, PAULSEN, Colored strand

$0.89 187 CA

9/16" 5,000 "9/16"", 6X36, FC, RRL, IPS, BRT, A1, CALWIRE

." $0.89 187

9/16" 3,000 9/16", 6X36, FC, RRL, EIPS, BRT, DRY, BRIDON, Colored strand

$1.09 187 CA

9/16" 4,000 9/16", 6X25, IWRC, STAINLESS, DOM. $2.25 187 CA

9/16" 5207 9/16' 7-FLEX IWRC RRL EIP refer to PN 150-00300 (WIRE CO)

$2.01 294 OH

9/16" 4.984 6x26 PPC Galv., Korea $0.45 275 OR

9/16" 5000' COMPACTED 19X19 - IMPORT $1.38 63 TX

9/16" 2 X 5000' 6X19 IPS IWRC RRL - IMPORT $0.53 63 TX

9/16" 12,500 ft. Diepa PZ 371 / 20.27 ton BS / ordinary lay / plasticized core

1.99 ft. 427 CA

9/16" 1727 9/16-14mm 8x25 Python Super 8R Brt LRL 1960 grade


9/16" 435 9/16"-14mm 18x19 Python Compac 18 BRT RRL 1960 Grade


9/16" 561 9/16"-14mm 38x7 Python Hoist BRT RRL 1960 Grade


9/16" 315' 9/16" XLT4 BRT - WRCA $2.48/FT 420 FL

9/16" 4179' 9/16" 6X25 FC RRL - IMPORT (1862511112) 311' & 3868'

$0.42 139 PA

9/16" 4236 6X25 RRL IPS BRT FC DOMESTIC $0.60 359 IL



9/16" 3245 6X25 IPS RRL IWRC $0.41 359 IL

9/16" 4800 6X25 RHLL EIPS BRT IWRC $0.33 359 IL


9/16" 102810 6X25 RRL EEIPS BRT IWRC $0.58 359 IL

9/16" 4650 6X25 RRL EEIPS BRT IWRC $0.58 359 IL

9/16" 4100 6X26 IWRC BRT SUPER SWAGE $1.11 359 IL





9/16" 5000 6X36 LRL EIPS BRT IWRC $0.89 359 IL


9/16" 4320 19X7 RRL EIPS BRT $0.88 359 IL



5/8" 998' 5/8" PYTHON POWER-9 9X19 COMPACTED LRL - 2160 GRADE

$2.27 32 IN

Gantry Style 15,000lbs (GS15) shown with power unit Cumberland GS15 • Our most popular Gantry Style Take-up MachineCumberland Sales Company offers their GS series ranging from 5,000 lbs to 60,000 lbs.Forward & Reverse Operation • Variable Speeds • Arbor Cones Standard • With Optional Coiling Head

Reliable. DuRable. unpaRalleleD.

Cumberland SaleS Company

615.833.7884 • 800.643.5189

FaX: 615.333.9879 • [email protected]

CSC_Ad_2013FULL_2.indd 1 3/4/13 2:40 PM

LISTER'S INDEX ON PAGE 74.WIRE ROPE EXCHANGE MARCH-APRIL 2013 37



5/8" 283' 5/8" PYTHON LIFT 34X7 NON-ROTATING COMPACTED RRL - 1960 GRADE

$1.66 32 IN

5/8" 355' 5/8" XLT4 BRIGHT WIRE ROPE- DOMESTIC

2.40/FT 420 FL

5/8" 5000 5/8 7x7x7 G CABLE LAID KOREA $0.75 35 MD

5/8" 2,200' 19X7 Spin Resistant Domestic #1071LTK1581

$1.29 95 WA

5/8" 3,150'&1,500'

6x7 GFC Korean heavy lube $0.40 35 MD

5/8" 7000 5/8X3/4 6X26 XIP IWRC BRT CLEAR PVC $0.79 54 CA

5/8" 2500 5/8 19X19 IWRC EIP BRT (NOT COMPACTED)

$1.60 54 CA

5/8" 5000 5/8" 6 x 25 IWRC Galvanized .65 foot 86 KY

5/8" 1648 5/8" 6 x 25 FC Galvanized 1648' .56 foot 86 KY

5/8" 5000 "34x7 WSC COMPACTED STRAND NR BRT 5/8 A2 (S.Korean)

2.61/ft 60 RI


2.05/ft 60 RI

5/8" 585 5/8" 6X19 FC,EIP,GALV A-LUBE $0.40 54 CA

5/8" 4315' VEROPOWER 8 Comapct & Swaged RRL IWRC GALV PPI (16mm)

$2.06 303 Texas


$1.97 303 Texas

5/8" 1003 5/8" 6x19 Fiber Core Domestic .76/Ft 421 SC

5/8" 960 5/8", 6x19, IWRC, RRL, IPS, BRT, DRY, CAL WIRE, STRAND

$1.11 187 CA

5/8" 960 5/8", 6X19, IWRC, RRL, IPS, BRT, DRY, CALWIRE

$1.11 187 CA

5/8" 2 X 1,000 5/8", 6X25, IWRC, RRL, EIPS, BRT, A2, WIRECO

$1.11 187 CA

5/8" 200 5/8", 6x36, FC, RRL, EIPS, BRT, DRY, WIRECO, Colored strand

$1.27 187 CA

5/8" 600 5/8", 6X36, FC, RRL, EIPS, BRT, A2, PAULSEN

$1.27 187 CA

5/8" est. 500 5/8", 6X37, FC, RRL, EIPS, BRT, A1, UNIVERSAL, Colored strand

$1.27 187 CA

5/8" 1X 1,000,1X600

5/8", 6X19, IWRC, STAINLESS, CAROLINA

$2.35 187 CA

5/8" 3 X 1,800 5/8", 6X19, IWRC, STAINLESS, DOM. $2.35 187 CA

5/8" 2,240' , 650'

5/8 WIRE ROPE 18 X 7 COMPACT EIPS KOREAN

1.36' 35 MD

5/8" 2,020 6x36 IWRC Brt. Korea $0.45 275 OR

5/8" 3,634 6x36 PPC Brt Korea $0.42 275 OR


5/8" 1,200 6x7 BFC KOREAN HEAVY LUBE $0.40 35 MD

5/8" 3674 5/8 - 16mm 8x25 Python Super 8R BRT RRL 1960 grade


5/8" 3225 5/8 - 16mm 6x36 Python Construct 6 BRT RRL 1960 grade


5/8" 100 5/8"-16mm 18x19 Python Compac 18 BRT RRL 1960 Grade


5/8" 613 5/8"-16mm 38x7 Python Hoist GAL RRL 1960 Grade


5/8" 1 x 305 ft and 1 x

"5/8"" 10x19 wire rope domestic .90/ft 44 IL

5/8" 1 x 2,000' 5/8" 7x19 GAC (Korean) $0.41 276 OH

5/8" 3796' 5/8" 6X37 FC RRL - KOREAN (2063711112)

.56' 139 PA

5/8" 370 8X25RRL TRAC BRT SISAL C $1.06 359 IL5/8" 3485 8X19 COMPACT BRT RLL SIS $1.19 359 IL5/8" 287 8X25 RRL EIPS BRT IWRC $0.83 359 IL5/8" 287 8X25 RRL EIPS BRT IWRC $0.83 359 IL5/8" 287 8X25 RRL EIPS BRT IWRC $0.83 359 IL5/8" 3880 8X19 RRL EIPS BRT IWRC CA $1.09 359 IL5/8" 118 6X26 RHLL EIPS BRT IWRC $0.66 359 IL5/8" 118 6X26 RHLL EIPS BRT IWRC $0.66 359 IL5/8" 373 6X26 RHAL EEIPS BRT IWRC $0.97 359 IL5/8" 373 6X26 RHAL EEIPS BRT IWRC $0.97 359 IL5/8" 12,582 6X36 RHRL IPS BRT FC $0.88 359 IL5/8" 12,582 6X36 RHRL IPS BRT FC $0.88 359 IL5/8" 158 6X36 RRL EIPS BRT IWRC $0.85 359 IL5/8" 3360 6X36 RRL EIPS BRT IWRC $1.42 359 IL5/8" 521 6X36 RRL EIPS IWRC GALV 5 $0.83 359 IL5/8" 155 6X36 LHRL EIPS BRT IWRC $0.83 359 IL5/8" 660 6X15 RRL IPS BRT PC $0.34 359 IL5/8" 4500 4X26WS RRL IPS BRT PPC $0.18 359 IL5/8" 7600 4X36WS RRL IPS BRT PPC $0.24 359 IL5/8" 155 16MM 6X36 RRL EIPS BRT IWRC $0.71 359 IL


11/16" 6090 18mm 10x19 Python Multi BRT RRL 1960 grade





11/16" 600 6X19 RRL IPS GALV PC $0.64 359 IL


3/4" 243' 3/4" PYTHON NORMALIFT 36X7 ROTATION-RESISTANT - CALIBRATED 1960 GRADE

$2.12 32 IN

3/4" 180' 3/4" PYTHON NORMALIFT 36X7 ROTATION-RESISTANT - CALIBRATED 1960 GRADE

$2.12 32 IN

3/4" 464' 3/4" PYTHON NORMALIFT 36X7 ROTATION-RESISTANT LRL - CALIBRATED 1960 GRADE

$2.12 32 IN

3/4" 255' 3/4" PYTHON NORMALIFT 36X7 ROTATION-RESISTANT LRL - CALIBRATED 1960 GRADE

$2.12 32 IN


$1.53 32 IN


$1.53 32 IN

3/4" 30000 3/4" 6 x 19 FC IPS Bright (6 x 5000) $0.69 86 KY

3/4" 4 X 2000 3/4 6X19 B.F.C. CHINA $0.58 35 MD

3/4" 2 @ 5000' 2 @ 5

3/4" 8x19 RL RH EEIPS IWRC (Spain) Certs.

1.00/FT 178 OH

3/4" 2,500' 3/4" 6x36 IWRC SS-304 3.25/ft 50 TX

3/4" 833 3/4 6x26 Swaged $1.10 9 Co

3/4" 258' 19X19 Flex-x SPR Domestic #1276LC0471

$3.32 95 WA

3/4" 2,577' 6X25 RRL IWRC Domestic #1232UC2668

$0.60 95 WA

3/4" 350' 6X3X19 Galv Springlay Domestic #1296L6627T

$0.50 95 WA

3/4" 265' 3/4" 6X21LRL IPS FC DRILL LINE KOREAN, 1 @ 265'

.50/ft 29 NY

3/4" 1 X 3130 FT

3/4" 19X7 ROTATION RESISTANT DOMESTIC

1.70/FT 44 IL

3/4" 2,237 6x19 IWRC Grey fi nish Stainless $2.20 35 MD

3/4" 1400 3/4 19x19 IWRC,EIP,BRT (Not Compacted)

$1.90 54 CA

3/4" 8160 "19x19S COMPACTED STRAND BRT EIPS 3/4"" A2 (Israel)

2.67/ft 60 RI

3/4" 1 X 150 3/4" 6X26 IWRC WITH PFV COATING-NEW DOMESTIC-WRCA

$1.75 44 IL

3/4" 3200' VEROPOWER 6 Compact & Swaged RRL IWRC PPI

$2.11 303 Texas

3/4" 6000' VEROPOWER 8 Comapct & Swaged RRL IWRC GALV PPI (19mm)

$2.50 303 Texas


$2.40 303 Texas

3/4" 4739' VEROTOP Compact 35x7 BRT 1960N/mm2 RHLL (20mm)

$2.51 303 Texas

3/4" 5351' VEROTOP Compact 35x7 GALV 1960N/mm2 LHLL (19mm)

$2.31 303 Texas

3/4" 300 3/4" 8x25 IWRC Rotation Resistant Domestic

1.20/Ft 421 SC

3/4" 276 3/4" 6x19 F/C Galv. Import 1x170' 1x176'

.95/Ft 421 SC

3/4" 2737 3/4" 7X31 FLEX-X 7 CC (LOADSTAR) TBD 294 OH

3/4" 3,600 3/4", 6x19, IWRC, RRL, STAINLESS, DRY, Bridon

$4.25 187 CA

3/4" 5 X 2,700 3/4", 6X19, IWRC, RRL, EIPS, GALV, A1, KOREAN

$1.00 187 CA

3/4" 250 3/4" 6X25, IWRC, RRL, EIPS, GALV, DRY, DOM.

$1.00 187 CA

3/4" 5 X 200 3/4", 6X25, IWRC, RRL, EIPS, BRT, A1 WIRECO

$1.58 187 CA

3/4" est. 600 3/4", 6X25, FC, RRL, IPS, GALV, DRY, KOREAN

$0.81 187 CA

3/4" est. 500 3/4", 6X25, IWRC, RRL, EIPS, BRT, WIRECO

$1.58 187 CA

3/4" 4 X 900 3/4", 6X36, IWRC, RRL, EIPS, BRT, A2, KOREAN

$1.00 187 CA

3/4" 800 3/4", 6X36, IWRC, RRL, EIPS, BRT, A2, KOREAN

$1.14 187 CA

3/4" 2 X 375 3/4", 6X36, IWRC, RRL, EIPS, BRT, PAULSEN

$1.77 187 CA

3/4" 400 3/4", 6X36, FC, RRL, GALV, DOM. $0.88 187 CA

3/4" 1 X 2500 3/4", 6X19, IWRC, RRL, EIPS, GALV, A1, KOREAN

$1.00 187 CA

3/4" 756 3/4" 6X26 IWRC GALV. NEW SURPLUS! $0.75 173 OR

3/4" 1065 3/4" 8X25 UNION WIRE ROPE $2.50 173 OR

3/4" 585 3/4 6X36 RRL FC $0.66 70 TX




3/4" 4,700' 3/4" WIRE ROPE 18X19 COMPACT EIPS-KOREAN

2.69' 35 MD

3/4" 1,621 6x36 PPC Brt., Korea $0.50 275 OR

3/4" 5,000 6x15 7PPC Galv., China $0.30 275 OR

3/4" 1,120 6x24 7PPCC Galv., China $0.40 275 OR



3/4" 3,400 ft 3/4" 6X25 IWRC XIP WIRE ROPE CHINESE

.88/ft 355 NY

3/4" 5000' 6X26WS RRL IWRC EIPS GALV - KOREAN

$1.06 63 TX

3/4" 375 3/4"-19mm 18x19 Python Compac18 BRT RRL 1960 Grade


3/4" FT 3/4" X 450 FT 35X7 WIRE ROPE $4.90 2 LA

3/4" 402' 3/4 Python Compac 35 RLL 2160 $4.48 420 FL

3/4" 508 3/4" DYFORM 34 LR 2160 GRADE B063183A50 175-135

$3.50 294 OH

3/4" 280 3/4" 19-STRAND HIGH PERFORMANCE ROPE B081921B00 175-130

$2.91 294 OH

3/4" 10500 3/4" 6X25 IWRC EIPS BRT RRL (KOREAN)

$0.98 144 LA

3/4" 260 3/4" 19-STRAND HIGH PERFORMANCE ROPE B075497A00 175-130

$2.82 294 OH

3/4" 124' 6 x 36 B.F.C -TURKEY $0.50 35 MD

3/4" 1 x 4894 ft and 1 x

3/4" 10X19 wire rope domestic 1.80/ft 44 IL

3/4" 358 8X25 RRL IRON BRT SISAL C $1.17 359 IL

3/4" 263 8X19 RRL TRACTION GALV PO $1.33 359 IL

3/4" 1276 8X19 RRL EHS GALV POLY CO $0.94 359 IL

3/4" 4290 3X7 GALV CABLE $0.90 359 IL

3/4" 55 19X7 RRL EIPS BRT $1.32 359 IL

3/4" 6829 8X19S RRL EIPS BRT IWRC $0.90 359 IL

3/4" 2000 3X7 GALV CABLE $1.00 359 IL


3/4" 490 6X26 RHAL EEIPS BRT IWRC $1.67 359 IL


3/4" 2449 6X26 SUPER SWAGED $1.96 359 IL


3/4" 118 20MM 6X36 RRL EIPS BRT IWRC $0.95 359 IL

3/4" 760' "6X26 RAL IWRC Domestic ""Paulsen"" Purpple strand.

2.00' 517 AR


13/16" 460 21mm 35x7 Python Compac 35 BRT LLL 2160 grade



7/8" 2,058' 7/8" PYTHON MULTI 10X19 SPIN RE-SISTANT COMPACTED - 1960 GRADE

$2.67 32 IN

7/8" 430' 7/8" PYTHON LIFT 34X7 NON-ROTATING COMPACTED - 1960 GRADE

$2.76 32 IN

7/8" 270' 7/8" PYTHON COMPAC 18 18X19 ROTATION-RESISTANT COMPACTED - 1960 GRADE

$1.87 32 IN

7/8" 300' / 400' 7/8 6X26 BIWRC LANG LAY XIP $1.60 35 MD

7/8" 1500 7/8 G 7X7X19 K $1.60 35 MD

7/8" 2137 7/8" 8x26 RL RH EEIPS PFI IWRC (spain) Cert.

3.75/FT 178 OH

7/8" 1 x 10,000'

7/8" 6x36 PC EIPS DOMESTIC 1.60/ft 50 TX

7/8" 50' 6x19s RRL IWRC Domestic #1420MCP9736

$0.99 95 WA

7/8" 395 6x26 BIWRC Swaged XIP Korean $1.10 35 MD

7/8" 4500' call 2.55 foot 86 KY

7/8" 5300 "6x31 IWRC COMPACTED STRAND BRT EIPS 7/8 A2 (Israel)

$2.94 60 RI


3.42/ft 60 RI

7/8" 2500 7/8 6x26 IWRC BRT B-LUBE CAMESA $1.30 54 CA


$3.10 303 Texas


$3.10 303 Texas


$3.10 303 Texas


$3.10 303 Texas


$3.10 303 Texas

7/8" 10 x 2500 7/8" 6 X 15 FC LASHING ROPE .40 per foot 294 OH

7/8" 600 7/8", 6x36", PPC, RRL, EIP, Colored Strand, Wireco

$1.65 187 CA


7/8" 300 7/8", 6X19, FC, RRL, IPS, GALV, DRY, DOM.

$1.05 187 CA

7/8" 200 7/8", 6x25, IWRC, RRL, EIPS, BRT, A1, KOREAN, Thimble one end

$1.19 187 CA

7/8" est. 700 7/8", 6X26, IWRC, RAL, EIPS, BRT, DRY, BRIDON, Right alternate lay

$2.10 187 CA


$1.33 187 CA

7/8" 2,000 7/8", 6X25, IWRC, RRL, EIPS, GALV, DRY, KOREAN

$1.33 187 CA

7/8" 2 X 900 7/8", 6X36, IWRC, RRL, EIPS, BRT, A2, KOREAN

$1.37 187 CA

7/8" 2,000 7/8", 6X36, FC, RRL, IPS, BRT, A1, CALWIRE

$2.23 187 CA

7/8" 200 7/8", 6X36, IWRC, RRL, EIPS, BRT, A2, WIRECO

$2.40 187 CA

7/8" 150 7/8", 6X36, IWRC, RRL, EIPS, GALV, DRY, KOREAN

$1.53 187 CA

7/8" 4 X 900 7/8", 6X36, FC, RRL, EIPS, GALV, PAULSEN

$1.17 187 CA

7/8" 2,000 7/8", 6X36, FC, RRL, IPS, BRT, A, CALWIRE

$2.23 187 CA

7/8" est. 800 7/8", 6X25, IWRC, LRL, EIPS, BRT, A1, PAULSEN, Left regular lay

$2.40 187 CA

7/8" 500 7/8", 6X36, FC, RRL, IPS, GALV, DRY, DOM. $1.17 187 CA

7/8" est. 600 7/8", 6X36, IWRC, RRL, EIPS, BRT, PAULSEN

$2.40 187 CA

7/8" est. 700 7/8", 6X36, IWRC, RRL, EIPS, BRT, ROCHESTER, Colored strand

$2.40 187 CA

7/8" 5 X 350 7/8", 6X36, FC, RRL, IPS, BRT, A1, PAULSEN, 3' Eye on one end

$2.23 187 CA

7/8" 4 X 350 7/8", 6X36, IWRC, RRL, EIPS BRT, A1, PAULSEN 3' Eye on one end

$2.40 187 CA

7/8" 300 7/8", 6X37, IWRC, RRL, EIPS, BRT, B & B

$2.40 187 CA

7/8" 5 X 350 7/8", 6X37, IWRC, RRL, EIPS, BRT, A1, PAULSEN

$2.40 187 CA

7/8" 600 7/8", 6x37, IWRC RRL, EIPS, WIRECO $2.40 187 CA

7/8" 1330 7/8" 6x26 IWRC GALV. NEW SURPLUS! $1.15 173 OR

7/8" 3300 7/8" 8X19 H.C. NEW SURPLUS! $0.70 173 OR

7/8" 315 7/8" 8X25 UNION WIRE ROPE $2.00 173 OR

7/8" 3,140 6x36 IWRC Brt. Korea $1.00 275 OR

7/8" 5,294 6x24 7PPC Galv., Korea $0.55 275 OR


7/8" 400 6 x 26 fl ex x 26 $3.45 9 Co

7/8" 4000 7/8" x Lt 4, lot #5J15895-02 $4.18 100 IL

7/8" 400' 7/8" 6x26 RAL XXIP DOMESTIC .85 per ft. 63 TX

7/8" 435' 7/8" 6x26 RAL XXIP DOMESTIC $0.85 63 TX

7/8" 470' 7/8" 6x26 RAL XXIP DOMESTIC $0.85 63 TX

7/8" 4565 ft. Diepa PZ 371 / 49 ton BS / ordinary lay / plasticized core

3.99 ft. 427 CA

7/8" 1@ 350', 1@ 210

7/8-22mm 35x7 Python Compac 35 BRT RLL 2160 Grade


7/8" 400 23mm 35x7 Python Compac 35 BRT RLL 1960 grade


7/8" 675 7/8" 6 X 26 IWRC R ALTERNATE LAY EIP Bridon B069519P00 150-560

$1.67 294 OH

7/8" 1960' 6 X 37 GIWRC - CHINA $1.00 35 MD

7/8" 350' 6 X 26 R. ALT LAY - BRIDON $1.50 35 MD

7/8" 1850' 6 X 36 BIWRC - WASH W.R. $2.10 35 MD

7/8" 2 X 760 FT 7/8" 6x26 EEIPS RIGHT ALTERNATE LAY WIRE ROPE - BRIDON

2.50/FT 44 IL

7/8" 740 6x26 RRL EIPS GALV IWRC $2.17 359 IL


7/8" 1450 6X19S RRL EEIPS BRT IWRC $0.83 359 IL

7/8" 555 6X36 RRL IPS BRT FC $0.80 359 IL




7/8" 4985 COMPACT 619 1960 GRADE $2.76 359 IL

7/8" 300 6X25 RRL IPS BRT FC $0.67 359 IL

7/8" 300 6X25 RRL IPS BRT FC $0.67 359 IL


7/8" 575 6X26 WS LRL IWRC $1.49 359 IL

7/8" 575 6X26 WS LRL IWRC $1.49 359 IL

7/8" 250 6X19 RHLL EIPS BRT $0.73 359 IL



$3.60 303 Texas

59 Industrial DriveNew Britain, PA 18901215.230.4260 Fax:230.4261www.chantengineering.com

Heavy Duty Testing Machines, designed for the rigging industryStandard sizes or custom machinesUpgrades for existing machinesSoftware compatible with all RFID systemsWorldwide Calibration Service for any testing machineQuality products and service since 1970

Horizontal Testing Machines 10,000 lbs. to 5,000,000 lbs. capacities - Any Length

Pre-Stretch Bed with Wire Rope Grips Mobile Machines

Operators Control DataTest Software

Vertical Machines - Any Capacity Wire Rope Grips - Any Size

40 MARCH-APRIL 2013 WIRE ROPE EXCHANGELISTER'S INDEX ON PAGE 74.



15/16" 3615' VEROPRO 8 Compact LRL IWRC GALV PPI (24mm)

$3.60 303 Texas

15/16" 3058' MULTI DF MDF Compact 34x7 2160N/mm2 RHLL BRT

$4.46 303 Texas

1'' Wire RopesiZe QtY. desCriPtiOn PriCe Lister ZOne

1" 497' 1" PYTHON LIFT 34X7 NON-ROTATING COMPACTED - 1960 GRADE

$4.02 32 IN


$4.02 32 IN


$4.97 32 IN


$4.97 32 IN


$4.97 32 IN

1" 1,700' 1" PYTHON HEAT SHIELD 8X19 HEAT RESISTANT WIRE ROPE

$3.26 32 IN

1" 395' 1" PYTHON COMPAC 18 18X19 ROTATION-RESISTANT COMPACTED - 1960 GRADE

$2.24 32 IN

1" 1020 1" 6x25 RLL XIP IWRC (Domestic) Cert. 2.40/FT 178 OH

1" 226 1" 6x25 RLL XIP IWRC (Domestic) Cert. 2.40/FT 178 OH

1" 720 1" DYFORM 34 LR 2160 GRADE 175-00210

$4.75 294 OH

1" 500 1" DYFORM 34 LR 2160 GRADE 175-00210

$4.75 294 OH

1" 360 1" DYFORM 34 LR 1960 GRADE 175-00205

$4.75 294 OH

1" 450 1" DYFORM 34 LR 1960 GRADE 175-00205

$4.75 294 OH

1" 151' 6X36 RRL IWRC Tuf-Kote Domestic #1656LT3543

$0.80 95 WA

1" 283 1 6X26 IWRC RHRL EIPS COMPACTED B/C LUBE

POR 171 BC

1" 250 6x25 GFC 'B' LUBE, Korean $0.80 35 MD

1" 175 19x7 BIWRC XIP Korean $0.80 35 MD

1" 2 X 470' 1X250'

1" DYFORM 8 - NEW BRIDON POR 44 IL

1" 1300 1" 6X19 IWRC,IPS,"C" LUBE,Phillipines $0.90 54 CA

1" 20,000 1" 6x19 galv fc w/ black plastic coating (new) $1.00 67 AL

1" 22,453 1 inch LRL, Domestic Wire Rope, various lengths: 4 reels @ 5,200'; 1 reel @ 820'; 1 reel @ 833'

2.10 foot 86 KY

1" 2000 "34x7 WSC COMPACTED STRAND NR BRT 1"" A2 (Israel)

$6.10 60 RI

1" 1738 "19x19S COMPACTED STRAND BRT EIPS 1 A2 (Israel)

4.93/ft 60 RI

1" 150 1" 8x25 IWRC Rotation Resistant Import 1.84/Ft 421 SC

1" 21 1" 6X25 IWRC GALV WHITE PVC COATED TO 1 1/8" X 223' 2" CABLE ASSY. THIMBLES IN EACH EYE, BT/BT (PN 300-02830)

$1,257.14 294 OH

1" 7 X 771 ft. 1" 6X25 FC GALV., WHITE PVC COATED TO 1-1/8"

3.40 ft 294 OH

1" 2 X 1000 1" 6X19 IWRC GALV IP; WHITE VINYL COATED TO 1-1/8"

3.40 ft 294 OH

1" 350 1", 6X31, IWRC, RLL ,BRT, A2, WireCo Flattened Strand

$4.25 187 CA

1" 685 1" 6X19S, IWRC, RRL ,EIPS, BRT, A2 , WireCo

$2.64 187 CA

1" 900 1", 6x19, FC, RRL, EIPS, BRT, A2, Import-WRI

$1.15 187 CA

1" est. 150 1", 6X19, IWRC, RRL, EIPS, BRT, A1, WIRECO, Open Spelter Socket -one end

$2.64 187 CA

1" 4 X 175 1", 6X25, IWRC, RRL, EIPS, BRT, A1, KOREAN, Thimble one end, button one end

$1.50 187 CA

1" 1", 6X25, IWRC, RRL, EIPS, BRT, BETHLEHEM

$2.64 187 CA

1" 175 1", 6x25, IWRC, RRL, EIPS, BRT, A1, DOM,

$2.64 187 CA

1" 1X 2000,1X1500

1",6X26, IWRC, RRL, EIPS, GALV, DRY, CALWIRE

$1.67 187 CA

1" 1X400, 1X250

1", 6X36, IWRC, RRL, EIPS, GALV, DRY, CALWIRE

$1.90 187 CA

1" est. 1,200 1", 6X36, FC, RRL, EIPS, BRT, A2, Korean

$1.30 187 CA

1" est. 3 X 150

1", 6X36, IWRC, RRL, EIPS, BRT, A1, WIRECO, Open Spelter Socket one end

$2.98 187 CA

1" 150 1", 6x36 IWRC, RRL, EIPS, BRT, A2, KO-REAN, Thimble one eye, button one eye

$1.70 187 CA

1" 175 1", 6X36, IWRC, RRL, EIPS, BRT, A2, DOM, Threaded stud

$2.98 187 CA

1" est. 200 1", 6X36, IWRC, RRL, BRT, A2, WIRECO $2.98 187 CA


1" 1,700 1", 6X36, IWRC, RRL, EEIPS, BRT, A1, PAULSEN, Right reg. XL25 matched pair

$2.98 187 CA

1" 1,700 1", 6X36, IWRC, LRL, EEIPS, BRT, A1, PAULSEN, Left reg. XL25 matched pair

$2.98 187 CA

1" 5,000 1" 6X36, FC, RRL, EIPS, BRT, A1, BETHLEHEM, Colored strand

$2.78 187 CA

1" 175 1", 6X36, IWRC, RRL, EIPS, BRT, DOM. $2.98 187 CA

1" est. 1,000 1", 6X17, FC, BRT, Lashing rope , 6X17 plus 7

$0.50 187 CA

1" 2 x1000 1", 6x37 , IWRC, RLL, EIPS, WireCo $2.65 187 CA

1" 600 1", 6X21, FC, BRT, LRL $1.65 187 CA

1" 1000 6x36 IWRC RRL EIPS Domestic, A2 lube; 1 reels of 1,000 ft.

$1.75 187 CA

1" 530 1" 8X19 LRL IMPORT $0.85 70 TX

1" 350 1" 6X31 RRL SWAGE DOM $1.00 70 TX

1" 2,992 6x24 7PPC Galv., Korea $0.70 275 OR

1" 1,999 6x26 PPC Galv., Korea $1.15 275 OR

1" 4 STAINLESS TYPE 304 IWRC 4 @ 17FT. 50.00ea 351 WI

1" 327' 1" 6X19S RR XIP FC DOMESTIC $1.00 63 TX

1" 967' 1" 6X19S RR XIP FC DOMESTIC $1.00 63 TX

1" 997' 1" 6X26WS LR XIP FC DOMESTIC $1.00 63 TX



1" 1476' 1" 6X26WS LRL XIP FC DOMESTIC $1.00 63 TX

1" 486 1" 6X19S RR XIP FC DOMESTIC $1.00 63 TX

1" 5000' 6X26WS RRL IWRC EIPS BRT- KOREAN $1.65 63 TX

1" 628' 1" 19x36 PYTHON LIFT WIRE ROPE(3219691211)

3.99' 139 PA

1" 4766 1" 8x25 Python Super 8V BRT RRL 2160 Grade


1" 1337 26mm 34x7 Python Lift BRT RRL 1960 grade


1" 735 1" 19-STRAND HIGH PERFORMANCE ROPE Redaelli R4/F1561 175-200

$3.90 294 OH

1" 720 1" DYFORM 34 LR 2160 GRADE B054893P00 175-210

$3.84 294 OH

1" 690 1" DYFORM 34 LR MAX R LANG LAY B071650A00-2 175-215

$4.50 294 OH

1" 685 1" 19-STRAND HIGH PERFORMANCE ROPE Bridon B042832A00-B 175-200

$3.64 294 OH

1" 634 1" 19-STRAND HIGH PERFORMANCE ROPE Bridon B075336C00 175-200

$3.90 294 OH

1" 629 1" DYFORM 34 LR MAX R LANG LAY B076959A00-1 175-215

$5.34 294 OH

1" 598 1" 19-STRAND HIGH PERFORMANCE ROPE Redaelli R15180/2000-003A 175-200

$3.90 294 OH

1" 550 1" 19-STRAND HIGH PERFORMANCE ROPE Union U38800452 175-200

$3.77 294 OH

1" 545 1" 19-STRAND HIGH PERFORMANCE ROPE U38702980 175-200

$3.77 294 OH

1" 510 1" 19-STRAND HIGH PERFORMANCE ROPE Redaelli R15006-99-05B 175-200

$3.90 294 OH

1" 500 1" DYFORM 34 LR 2160 GRADE B058673P00-A 175-210

$4.47 294 OH

1" 450 1" DYFORM 34 LR 1960 GRADE B058673P00-A 175-205

$4.47 294 OH

1" 393 1" DYFORM 34 LR MAX R LANG LAY B072543B00 175-215

$4.50 294 OH

1" 360 1" DYFORM 34 LR 1960 GRADE B058673P00 175-205

$4.47 294 OH

1" 350 1" 19-STRAND HIGH PERFORMANCE ROPE Union U01671483 175-200

$3.77 294 OH

1" 324 1" CONSTRUCTEX B062806Q00 150-715

$3.69 294 OH

1" 313 1" 19-STRAND HIGH PERFORMANCE ROPE R15931-9906T 175-200

$3.62 294 OH

1" 291 1" 19-STRAND HIGH PERFORMANCE ROPE Redaelli R2/F1543 175-200

$3.90 294 OH

1" 570' 1" - 7 FLEX P FV $6.00 35 MD

1" 3600 6 x 26 iwrc Galvanized new domestic $3.10 7 TN

1" 3600 ft 6 x 26 IWRC Galvanized Domestic $3.00/ft 7 TN

1" 800' 1" 18x19 DY-PAC 18 -WRI $4.72 / FT. 420 FL

1" 5000 "Bright Wire Rope EIPS IWRC - 6x19 Class - 1'' (5000' Coil)

3.12 LF 534 IA


$4.02 32 IN

1" 3000 6X26 RRL IPS GALV FC $1.15 359 IL

1" 690 6X26 RRL EIPS BRT IWRC $0.90 359 IL

1" 840 6X26 RHAL EEIPS BRT IWRC $1.63 359 IL

1" 1650 6X19S RRL EEIPS BRT IWRC C-LUBE $1.81 359 IL

LISTER'S INDEX ON PAGE 74.WIRE ROPE EXCHANGE MARCH-APRIL 2013 41



1" 2148 "19x7 RRL EIPS BRT $2.19 359 IL

1" 1550 8X25 RRL EIPS BRT IWRC $1.88 359 IL

1" 1 N/A CALL 346 TN

1 1/8'' Wire RopesiZe QtY. desCriPtiOn PriCe Lister ZOne

1 1/8" 117' 1-1/8" PYTHON MULTI 10X19 SPIN RESISTANT COMPACTED - 1960 GRADE

$4.06 32 IN

1 1/8" 633' 1-1/8" PYTHON LIFT 34X7 NON-ROTAT-ING COMPACTED RRL - 1960 GRADE

$4.10 32 IN

1 1/8" 1,318' 1-1/8" PYTHON LIFT 34X7 NON-ROTAT-ING COMPACTED RRL - 1960 GRADE

$4.31 32 IN

1 1/8" 185' 1-1/8" PYTHON LIFT 34X7 NON-ROTAT-ING COMPACTED LLL - 1960 GRADE

$4.10 32 IN


$4.10 32 IN


$4.10 32 IN


$4.10 32 IN


$4.10 32 IN


$4.10 32 IN


$4.10 32 IN

1 1/8" 500' 1.1/8" 6x36 IWRC SS-304 5.95/ft 50 TX

1 1/8" 387' 7X26 RRL IWRC Domestic #1891LC0006

$2.25 95 WA

1 1/8" 645' 8X19 SPR RRL IWRC Domestic #1861UC2931

$2.90 95 WA

1 1/8" 19,500' (13 reels various lengths 50-500 ft surplus) 6X19 BRT IWRC WITH HL

$0.40 95 WA

1 1/8" 2 X 2500 1-1/8", 6x41, PPC, EIPS, RRL, Bright, A-1, Bridon w/certs

$2.75 187 CA

1 1/8" 8000 1-1/8" 7x21 7-fl ex PFV $1.59 426 FL

1 1/8" 572 6x37 GFC China $0.95 35 MD

1 1/8" 4000 6x19 BFC China; 3,000; 634 $1.50 35 MD

1 1/8" 228 1-1/8" 6x31 IWRC RRL EEIP Domestic 3.39/Ft 421 SC

1 1/8" 2 X 1,000 1-1/8", 6X19, IWRC, RRL, EIPS, BRT, A2, PAULSEN

$3.34 187 CA

1 1/8" 1,000 1-1/8", 6X19, IWRC, RLL, EIPS, BRT, A2, DOM., Right lang lay

$3.34 187 CA

1 1/8" 1,000 1-1/8", 6X25, IWRC, RRL, EIPS, BRT, D, PAULSEN

$3.34 187 CA

1 1/8" 1,000 1-1/8", 6X25, IWRC, RRL, EIPS, BRT, A2, PAULSEN

$3.34 187 CA

1 1/8" est. 1,000 1-1/8", 6X25, IWRC, RRL, BRT, A1, KOREAN

$1.85 187 CA

1 1/8" 2 X 1,200 1-1/8", 6X25, FC, RRL, EIPS, BRT, A1, KOREAN, Colored strand

$1.39 187 CA

1 1/8" 900 1-1/8", 6X37, FC, RRL, GALV, DRY, PAULSEN

$1.21 187 CA

1 1/8" 600 1-1/8", 6X37, FC, RRL, GALV, DRY, WIRECO

$1.21 187 CA

1 1/8" est. 700 1-1/8", 6X37, FC, RRL, EIPS, BRT, A1, DOM.

$3.58 187 CA

1 1/8" 2,000 (2 reels)

1-1/8", 6X36, IWRC, RRL, EIPS, BRT, A1, JAPAN

$1.85 187 CA

1 1/8" 1100 1-1/8" 6X26 IWRC GALV. NEW SUR-PLUS!

$1.80 173 OR

1 1/8" 1130' 6X19S IWRC XIP RRL DOMESTIC $1.25 63 TX



1 1/8" 620' 6X26 COMPACTED FLEX-X-6 DOMESTIC $1.50 63 TX

1 1/8" 3280 ft Diepa PZ 371 / 81 ton BS / ordinary lay / plasticized core

6.99 ft. 427 CA

1 1/8" 340 1-1/8 34x7 Python Lift brt LLL 1960 grade


1 1/8" 200 1-1/8" 18x19 Dyform18 BRT RRL 1960 Grade


1 1/8" 725 1-1/8" 6 X 31 IWRC RRL EIP Bridon B072827A00-2 150-865

$2.57 294 OH

1 1/8" 300 1-1/8" 6 X 25 FC RRL EIP Union USJS2349-01A 150-820

$2.60 294 OH

1 1/8" 5000 1-1/8" 6X36 IWRC EIPS BRT RRL (KOREAN)

$1.75 144 LA

1 1/8" 328' 6 X 26 GFC - KOR 1.60' 35 MD

1 1/8" 190' 6 X 25 BIWRC XIP LANG - TURKEY 1.30' 35 MD

1 1/8" 2000' 6 X 25 BIWRC XIP LANG - KOR 1.55' 35 MD

1 1/8" 1 x 2800' 6x19 EIPS IWRC Hot Galv China $1.75 ft 50 TX

1 1/8" 170 1-1/8" 6x26 EIP IWRC RLL BRT - WRI North American

$3.38/FT 420 FL


1 1/8" 690 FT BRIDGE STR, 1-1/8", 1X37, GALV., LEFT LAY.,JACKETED ASTM A586

$4.50 525 CAN

1 1/8" 1570 6X25 RRL IPS BRT FC $1.27 359 IL

1 1/8" 1220 6X25 RRL IPS BRT IPS BRT FC $1.41 359 IL

1 1/8" 875 6X26 RRL EIPS GALV PC $1.29 359 IL

1 1/8" 3915 6X26 RHLL EIPS BRT IWRC $1.86 359 IL

1 1/8" 130 6X21 RHLL RHLL EIPS BRT IWRC $1.35 359 IL

1 1/8" 5000 6X26 RHAL EEIPS BRT IWRC $2.24 359 IL



1 1/8" 1409 6X36 RRL IPS BRT FC USA $1.47 359 IL

1 1/8" 764 6X36 RRL IPS GALV FC $1.49 359 IL

1 1/8" 1225 6X36 LHRL EIPS BRT IWRC $2.26 359 IL

1 1/8" 1915 6X19 TRAC SISAL CORE $3.74 359 IL


1 1/4" 1,180' 1-1/4" PYTHON MULTI 10X19 SPIN RESISTANT COMPACTED - 1960 GRADE

$5.54 32 IN

1 1/4" 3,040' 1-1/4" PYTHON SUPER 8V 8X19 COMPACTED LRL - 1960 GRADE

$5.23 32 IN

1 1/4" 1 X 2000 FT

1-1/4" 6X25 EIP RRL FIBER CORE DOMESTIC

$2.10 44 IL

1 1/4" 1450' 1.1/4" 19x7 Rot Res DOMESTIC 4.25/ft 50 TX

1 1/4" 6200 1-1/4" 19x7 non rot 2x3100 $1.80 426 FL

1 1/4" 1 X 400 FT 1-1/4" 6X37 FIBER CORE IMPORT 1.42/FT 44 IL

1 1/4" 6 #29) 1-1/4"x38'-6" Wire Rope Pendant w/ C/L closed socket ea. (LL)

$150.00 95 WA

1 1/4" 6 #29) 1-1/4"x69' Wire Rope Pendant w/ C/L closed socket ea. (LL)

$225.00 95 WA

1 1/4" 6 #9) 1-1/4"x27' Wire Rope pendant w/ C/L closed socket ea end (LL)

$150.00 95 WA

1 1/4" 6 #9) 1-1/4"x59'-6" Wire Rope pendant w/ C/L closed socket ea end (LL)

$200.00 95 WA

1 1/4" 24 #4) 1-1/4"x3' Wire Rope pendant w/ C/L open socket & closed socket (LL)

$100.00 95 WA

1 1/4" 24 #3) 1-1/4"x4' Wire Rope pendant w/ C/L open socket & closed socket (LL)

$100.00 95 WA

1 1/4" 1,900 ft 1-1/4" - 19x7 IWRC Non-Rotating MBS 107,400lbs

$3.92 156 SK

1 1/4" 900 1.1/4" 6X26 IWRC,BRT RT.LANG LAY KOREAN

$2.36 54 CA

1 1/4" 185' 1.1/4" 6X36 IWRC,EIP,GALV A-1 $2.10 54 CA

1 1/4" 1786' VEROPOWER 8 Compact & Swaged RRL IWRC GALV PPI

$6.13 303 Texas

1 1/4" 275 1-1/4", 6X25, IWRC, RRL, EIPS, BRT, KOREAN, Button/electrolne

$2.44 187 CA

1 1/4" 350 1-1/4", 6X25, IWRC, RRL, EIPS, BRT, A1, BETHLEHEM

$4.03 187 CA

1 1/4" 200 1-1/4", 6X25, IWRC, RRL, EIPS, BRT, A1, DOM.

$4.03 187 CA

1 1/4" est. 700 1-1/4", 6X41, IWRC, RRL, EIPS, BRT, A2, WIRECO

$4.54 187 CA

1 1/4" 585 FT 1-1/4" 6X36 DOMESTIC FIBER CORE 2.47/FT 44 IL

1 1/4" 10000 8 x 25 fi ber center regular lay new $1.25 7 TN

1 1/4" 3820 1-1/4-32mm 34x7 Python Lift BRT RRL 2160 grade


1 1/4" 6700 1-1/4" 6X19 IWRC EEIPS BRT RRL (KOREAN)

$2.45 144 LA


$2.30 144 LA

1 1/4" 720' 6 X 37 GFC - CHINA 2.00' 35 MD1 1/4" 575 6X25 RRL IPS BRT FC $1.33 359 IL1 1/4" 1600 6X26 LHRL EIPS BRT IWRC $2.94 359 IL1 1/4" 5266 6X26 RRL EIPS GALV IWRC $3.26 359 IL1 1/4" 2700 6X26 RRL EIPS GALV IWRC $3.38 359 IL1 1/4" 2500 6X26 RHAL EEIPS BRT IWRC $2.30 359 IL1 1/4" 800 6X26 RHAL EEIPS BRT IWRC $2.62 359 IL1 1/4" 100 19X7 RRL EIPS BRT $2.81 359 IL1 1/4" 254 19X7 RRL EIPS BRT $2.81 359 IL1 1/4" 660 "COMPACT 619 1960 GRADE $4.81 359 IL

1 1/4" 1 x 770' 1.1/4" 19x7 RR Domestic $4.25 50 TX

1 1/4" 2 x 700' 1.1/4" 6x25 EIPS IWRC RRL Brt A-1 Domestic

$3.90 50 TX


1 3/8" 1812 1 3/8 (36MM) 6X36 G.F.C $2.50 35 MD

1 3/8" 1 X 250 FT 1-3/8" 6X25 RRL FIBER CORE DOMESTIC 1.75/FT 44 IL

1 3/8" 1320, 138 1 3/8 6x37 BIWRC $1.80 35 MD

1 3/8" 2,000' 1.3/8" 6x41 IWRC EIPS DRAWN GALVANIZED DOMESTIC

5.25/ft 50 TX






1 5/8" 775' 6X26 IWRC RRL BRT USED - 2641JU939

$0.65 95 WA

1 5/8" 1 reel 1 5/8" 6x19 FC $1.45 426 FL

1 5/8" est. 150 1-5/8", 6X36, IWRC, RRL, EIPS, GALV, A1, KOREAN

$6.05 187 CA

1 5/8" 2417 ft 1-5/8' 6 X 37 IWRC RRL EIP (BRIDON) refer to PN# 150-1135

6.00 ft 294 OH


$4.81 144 LA

1 5/8" 1 x 565 ft 6x36 EIP IWRC RLL A1 Domestic $3.10 ft 50 TX

1 5/8" 4 "1-5/8 x 25 ft 10"" class A galv strand pendant assenbly with G416

$900.00 399 MN

1 5/8" 2000 6X25 RRL EIPS BRT IWRC $5.12 359 IL


1 3/4" 800 1-3/4" 6x25 Galvanized EIPS RHRL IWRC (Import) Cert.

6.40/FT 178 OH


6.40/FT 178 OH


6.40/FT 178 OH

1 3/4" 1140 1.3/4" 6x26 IWRC EIPS C-Lube DOMESTIC

7.05/ft 50 TX


$4.75 95 WA

1 3/4" 4500 1-3/4" FC 6x19 $1.50 426 FL

1 3/4" 200 1 3/4 6X26 FC RHRL B LUBE POR 171 BC

1 3/4" 200' VEROPRO 8 Compact LRL IWRC GALV PPI (44mm)

$10.82 303 Texas

1 3/4" 100' VEROPRO 8 Compact RRL IWRC GALV PPI (44mm)

$10.82 303 Texas

1 3/4" 900 1-3/4", 6X19, FC, RRL, IPS, GALV, A1, Socket on end

$3.55 187 CA

1 3/4" 9600' 6x26 RRL IWRC New Bethlehem $3.75 287 TX

1 3/4" 6900' 6x19" RRL IWRC Domestic $3.50 287 TX


1 3/4" 1208 6X36 RRL EEIPS BRT IWRC $7.69 359 IL

1 3/4" 1 x 1263' 1.3/4" 6x26 EIPS IWRC RRL Drawn Galv Korean

$6.15 ft 50 TX


1 7/8" reel 1-7/8" 6x19 FC Dom. $1.88 426 FL


2" 370 2" 6x25 Galvanized EIPS RHRL IWRC (Import) Cert.

7.60/FT 178 OH

2" 1@452' & 1@310'

8x36 EIP IWRC RLL CUSHION PAC 16.98/FT 420 FL

2" 600 2 6X26 IWRC RHRL EIPS B/C LUBE "CURLY"

POR 171 BC

2" 6 #29) 2"x74'-6" Wire Rope Pendant w/ C/L closed socket ea. (LL)

$650.00 95 WA

2" 6 #29) 2"x113'-6" Wire Rope Pendant w/ C/L closed socket ea. (LL)

$850.00 95 WA

2" 6 #29) 2"x12' Wire Rope pendant w/ C/L open socket ea end. (LL)

$700.00 95 WA

2" 6 #9) 2"x100'-3" Wire Rope pendant w/ C/L closed socket ea end (LL)

$700.00 95 WA

2" 6 #9) 2"x67' Wire Rope pendant w/ C/L open socket & closed socket (LL)

$750.00 95 WA

2" 12 #9) 2"x107'-6"' Wire Rope pendant w/ C/L open socket & closed socket (LL)

$975.00 95 WA

2" 9500 2" 6X25 EEIPS IWRC BRT RRL (KOREAN)

$6.99 144 LA

2" 3000Ft 2"6 x25 IWRC RRL EEIPS Bethleham A-1 Lube

Call 187 CA

2" 310 ft 2" 8x36 EIP IWRC RLL CUSHION PAC 8 COATED - Domestic

$15.00/ft 420 FL

2" 2950' "2"" 6X26 IWRC RLL EIP BRIGHT DOMESTIC

$9.75 518 LA



$3.50 95 WA



$8.95 95 WA

2 1/4" 2x2000 2 1/4" Galv good used cable $1.50 426 FL



1 3/8" 5,000' 1.3/8" 6x36 PC EIPS DRAWN GALVANIZED A-1

2.95/ft 50 TX

1 3/8" 1,000' 1.3/8 6x36 IWRC SS T304 9.95/ft 50 TX

1 3/8" 500' 6X26 IWRC RRL USED - 2241JU1047 $0.75 95 WA

1 3/8" 360 1-3/8" Spring-Lay, RRL, Galv., Dry, Paulsen, New

$2.45 187 CA

1 3/8" 1,400(2 reels)

1-3/8", 6x41, IWRC, RRL, EIPS, Bridon $3.55 187 CA

1 3/8" 400 1 3/8 6X26, FC, RHRL POR 171 BC

1 3/8" 1000 1.3/8 6X36 IWRC,EIP,BRT A-LUBE $3.25 54 CA

1 3/8" 120 1.3/8" 6X26 IWRC,EIP,GALV DRY $3.25 54 CA

1 3/8" 3718' VEROPRO 8 Compact RRL IWRC GALV PPI (36mm)

$7.46 303 Texas

1 3/8" 5 X 325 1-3/8", 6X31, IWRC, BRT, PRATT & SONS, CROSBY G416, OP CRS SW SKT One end

$3.35 187 CA

1 3/8" est. 150 1-3/8", 6X37, IWRC, RRL, EIPS, BRT, BRIDON, Colored strand

$2.40 187 CA

1 3/8" 1,200 1-3/8", 34LR, BRT, BRIDON $6.50 187 CA

1 3/8" 130' 1-3/8" 6x26 EIP IWRC RLL BRITE - DOMESTIC

4.50 PER FT 420 FL

1 3/8" 845 6X25 RRL EIPS GALV IWRC $2.56 359 IL




1 1/2" 1000' 1-1/2" 6X3X19 SPRING LAY "NEW" 3.00 per foot 105 WA

1 1/2" 8 USED STRUCTURAL STRAND ASSY 1-1/2" X 228' S-501 SOCKETS EACH END

$2,000.00 403 CT


$2,000.00 403 CT


$2,000.00 403 CT


$2,000.00 403 CT


$2,000.00 403 CT

1 1/2" 8 USED STRUCTURAL STRAND ASSY. 1-1/2" X 379' S-501 CROSBY SOCKETS EACH END

$2,000.00 403 CT

1 1/2" 1,000' 1.1/2" 7x7x19" Galvanized Cable Laid 7.50/ft 50 TX

1 1/2" 360' 6X36 RRL IWRC Tuf-Kote Domestic #2459LTK8557

$2.50 95 WA

1 1/2" 24,200' (22 reels various lengths 50-700 ft surplus) 6X19 BRT IWRC WITH HL

$0.90 95 WA

1 1/2" 1,500 1-1/2", 6x37, Class WC, RRL, Type 304 Stainless, New with Mill Certs

POA 187 CA

1 1/2" 4 reels 1-1/2" 6x25 Galv. FC $1.25 426 FL

1 1/2" 156 6X19 FC GALV DOUBLE LUBE $1.25 48 BC CAN

1 1/2" 3 X 235 1-1/2", 6X30, IWRC, RLL, EIPS, BRT, WIRECO, Flattened strand

$8.20 187 CA

1 1/2" 2 X 450 1-1/2", 6X31, IWRC, RLL, BRT, DOM., Flattened strand

$8.20 187 CA

1 1/2" est. 150 1-1/2", 6X19, IWRC, RRL, EIPS, GALV, KOREAN

$3.49 187 CA

1 1/2" 2 X 600 1-1/2", 6X36, FC, RRL, BRT, A2, DOM. $6.30 187 CA

1 1/2" 135 1-1/2" 6X36 LANG-LAY TUF-KOTE $6.99 173 OR



1 1/2" 2500 1-1/2" 6X36 EIPS IWRC GALV RRL (KOREAN)

$3.35 144 LA

1 1/2" 3100 1-1/2" 6X19 IWRC EEIPS BRT RRL KOREAN

$3.95 144 LA

1 1/2" 2800 1-1/2" 6X25 IWRC EIPS BRT RRL (DSR) $3.50 144 LA

1 1/2" 14 "1-1/2"" X 230 FT TUF MAX 8X36 RIGHT LANG LAY C/W FERRULES (2-3/4"" X 3-1/2"") AND BECKETS AT EACH ENDS, HAIRPIN WOUND

2421.42 /EA 525 CAN

1 1/2" 4 1-1/2" X 230 FT TUF MAX 8X36 LEFT LANG LAY C/W FERRULES (2-3/4" X 3-1/2") AND BECKETS AT EACH ENDS, HAIRPIN WOUND

2421.42 / EA 525 CAN

1 1/2" 2560 38MM 6X36 LRL 1960 BRT IWRC $3.53 359 IL





North American customers are welcome to contact Chant Engineering Co. Inc. for more information and pricing. www.chantengineering.com

Customers outside North America are welcome to contact Talurit AB for more information and pricing. www.talurit.com

Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Efficiency!Annealing machinesAnnealing machines use neither shears nor cutters. The wire rope is twisted off, by applying current to heat up the wire rope. When the rope is red hot, it is twisted off. After twisting, the rope end is slightly rounded and the wires will not unwind. This facilitates fitting the ferrules. It is also possible to taper the end of the rope, e.g. for excavating machines, by increasing the distance between the clamping points while twisting.

Since the machines are equipped with eccentric levers for rapid clamping, only one basic setting is required for a specific wire rope diameter. In addition, the tension dies are designed so that they can be adjusted for different rope diameters. The supply of current is controlled via a foot pedal, leaving the hands free to operate the machine.

A unique machine with the capacity to both pull apart and twist the wire rope independently of each other. Annealing machine,

type AV 40

Wire rope with annealed end.

Shear cut wire rope.


WIRE ROPE-BLOCKS WRE CAtALOG


2 1/4" 3,000 2-1/4", 6X37, FC, RRL, EIPS, GALV, D, USHA Closed socket inside

$6.25 187 CA

2 1/4" 1 x 4000' 2.1/4" 6x26 EIPS IWRC RRL Bright $8.50 50 TX


2 3/8" 1,860' 2.3/8" 6x26 IWRC EIPS A-1 9.95/ft 50 TX

2 3/8" 220 2-3/8" 6x41 Right Lang Lay Domestic 12.47/Ft 421 SC


2 3/8" 1500 2.3/8" 6x26 EIPS IWRC RRL Bright $9.05 50 TX


2 5/8" 300 2 5/8" PFV Lang IWRC $2.25 426 FL




3" 5200 3" 6X36 EEIPS IWRC BRT RRL (KOREAN)

$15.73 144 LA

3" 1000FT 3" 6 x 25 IWRC RRL EIP Bethleham Call 187 CA


3 1/4" 2,337' US Steel Lock Coil Track Strand Weight 65,000#

$14.00 95 WA

BlockssiZe QtY. desCriPtiOn PriCe Lister ZOne

400 1 1/2 SWIVEL EYE BLOCK $3.00 35 MD

6 15 TON 8" SNATCH BLOCK W/HOOK $120.00 35 MD

6 15 TON 8" SNATCH BLOCK W/SHACKLE $120.00 35 MD

4 20 TON 8" SNATCH BLOCK W/HOOK $320.00 35 MD

1 USED GUNNEBO 200 TON 5-SHEAVE BLOCK J200QN30RTD

$25,000.00 403 CT

1 NEW GUNNEBO BLOCK 300 TON 9 SHEAVE HOOKBLOCK J300N130TTA

$48,000.00 403 CT

50 KC4 Light Duty Snatch Block, 4" 6.00/ea 50 TX

110 KW4 Hay Fork Pulley, 4", 1ton, 1/2" rope 7.00/ea 50 TX

25 KM2 Hay Fork Pulley 4", 1ton, 1.1/4" Manila

6.00/ea 50 TX

25 KM12 Hay Fork Pulley, 6", 2ton, 1.1/2" Manila

14.00/ea 50 TX

175 K1710 Tong Line Block, 8", Roller Bear-ing, 3ton, 5/8" rope, KOREA

105.00/ea 50 TX

130 K4185 Snatch Block, 6" w/Hook, 12ton, 7/8" rope KOREA

115.00/ea 50 TX

120 K4185 Snatch Block, 8" w/Hook, 12ton, 7/8" rope, KOREA

145.00/ea 50 TX

80 K4182 Snatch Block, 8" w/Hook, 10ton, 7/8" rope, KOREA

120.00/ea 50 TX

90 K4192 Snatch Block, 6"w/Shackle, 10ton, 7/8" rope, KOREA

100.00/ea 50 TX


125.00/ea 50 TX


115.00/ea 50 TX


145.00/ea 50 TX

1 #501 - 20"/65T Miller 5 Sheave Hook Block 3/4" W?R, Mfg# 520F65, Weight 2,160 lbs.l

$6,300.00 95 WA

1 #401 - 36"/100 ton Skookum 4 Sheave Hook Block 1-1/4" W?R

$6,500.00 95 WA

1 40T 3 sheave 7/8" $2,100.00 427 CA

1 40T 3 sheave, 7/8 wire $2,000.00 427 CA

1 35T McKissick, new for 7/8 wire $1,850.00 427 CA

1 40T 3 sheave, 3/4 wire $2,100.00 427 CA

30 12" 7T Campbell Special Oval 1-Sheave Construction Block, 5/8" Wire Rope, Surplus, Wt. 95

$225.00 187 CA

75 12" 20T BTC 6734 Yokes 4-Sheave Construction Block, 5/8" Galv. Wire Rope, Painted, New, Wt. 275

$750.00 187 CA

1 18" 35T McKissick G-842 1-Sheave Construction Block, 3/4" Wire Rope, Like New, Wt. 275

$1,575.00 187 CA

4 16" 15T Miller 216F15RT 2-Sheave Crane Block, 3/4" Wire Rope, New, Wt.

$1,675.00 187 CA

6 6" 7T Skookum RT-6A 1-Sheave Snatch Block, 3/8 to 1/2" Wire Rope, New

$225.00 187 CA

20 6" 7T McKissick 439 1-Sheave Snatch Block w/ safety dropside + swivel hooks, 1/2" Wire Rope, New

$55.00 187 CA


25 8" 12T Crosby 440 + Skookum, with safety dropside + swivel shackle, 2-Sheave Snatch Block, New

$375.00 187 CA

4 9" 25T Skookum 2-Sheave Snatch Block, 5/8" wire rope (can be regrooved up to 3/4", extra cost), roller bearings, swivel shackle, New

$625.00 187 CA

1 Miller 2 sheave 25T, 5/8 block $1,075.00 427 CA

1 Miller type 25T, 2 sheave 7/8 wire $1,350.00 427 CA

1 Miller 40T 3 sheave 7/8 wire $3,400.00 427 CA

1 #502 - 20"/70T Johnson 5 Sheave Hook Block 3/4" W/R, Weight 2,114 lbs.

$6,300.00 95 WA

20 60 Ton RopeBlock Snatch Blocks 24" Swivel Shackle 1-1/2"-2" Wire Rope

POA 187 CA

12 40 Ton 20" Snatch Block RopeBlock Model V.B.450.38.1.35

POA 187 CA

Call 30 Ton - 150 Ton, Tilt-Up Snatch Blocks, RopeBlock, 1-1/8" - 3-1/2" wire rope

Call 187 CA

1 14" Johnson Model, J35T14RTB $2,875.00 187 CA

1 MILLER 20 T SHEAVE BLOCK FOR 7/8" $1,250.00 427 CA

1 Miller 320, H40, 40 US Ton WLL, (3) 20" sheaves, 7/8" (can be regrooved to 1", extra cost) 930 lbs., like-new

$3,875.00 187 CA

50 12" CROSBY WOOD SNATCH BLOCK T-385-C

$225.00 221 WA

50 12" CROSBY WOOD SNATCH BLOCK J-385-B

$225.00 221 WA

71 10" CROSBY WOOD SNATCH BLOCK H-385-C

$200.00 221 WA

64 8" CROSBY STEEL SNATCH BLOCK H-390-C

$150.00 221 WA

66 6" CROSBY WOOD SNATCH BLOCK T-386

$95.00 221 WA

35 8" CROSBY T-941 W/R SNATCH BLOCK W/SWIVEL HOOK

$150.00 221 WA

10 14" TRIPLE MALL. IRON BLOCK W/ HVY SHACKLE - 1 3/4" W/R

$895.00 221 WA

8 14" DBL. MALL. IRON BLOCK W/ HVY SHACKLE - 1 3/4" W/R

$600.00 221 WA

33 14" K-954 MALL IRON W/R SNATCH BLOCK - OBLONG SWVL EYE

$650.00 221 WA

53 5" TRIPLE HS-23-C WOOD BLOCK $50.00 221 WA

60 4" 303-B (no fi tting) TRIPLE MALL IRON BLOCK - 1/2" ROPE

$75.00 221 WA

64 8" HS-302-B DOUBLE MALL IRON BLOCK 1" ROPE

$140.00 221 WA

83 4" HS-301-C SINGLE MALL IRON BLOCK - 1/2" ROPE

$25.00 221 WA

156 8" SLUSHER BLOCK 5 TON 456-H $150.00 221 WA18 12" MILLER HIGH LIFT BLOCK 10 TON

W/ HOOK 3/4" W/RCALL FOR PRICE

221 WA

6 #103 - Johnson 1 sheave equalizer block, 19" OD, 2" W/R, 104 ton w/ 3" 75 ton SPCS Ulven Johnson 19EQBLOCK, 542 lbs. each.

$2,000.00 95 WA

10 #604 - 6 Sheave Johnson 20" Tackle Block, 1" W/R, 100T WLL

$2,000.00 95 WA

14 #702 - 7 Sheave Johnson 20" tackle block, 1" W?R 100T WLL

$2,250.00 95 WA

2000 1.1/2" Single Fixed Eye Pulley, Malleable $0.30 54 CA3 16" SNATCH W/SWIVEL HOOK $325.00 54 CA50 3" LT.PATTERN,SNATCH W/BAIL $8.00 54 CA1 60 Ton Hookblock for 5/8" Wire Rope

6 O/Side Sheaves 15 7/8 2 I/Side Sheaves 17 15/16" (Will provide Drawings upon request)

14,820.00 obo

294 OH

2 Johnson J30S18RTB; 30 Ton WLL w/ (1) 18" Sheave, 3/4" - 7/8" wire, incl. hook locking device, 630 lbs.

$2,675.00 187 CA

20 McKissick Snatch Block w/ Safety Dropside & Upset Shackle - 15 Ton WLL, 10" Sheave, *3/4" wire rope (can be regrooved to 1"; extra cost), military surplus

$475.00 187 CA

1 McKissick model 342 Crane Block - LIKE NEW, 50 Ton WLL, (2) 24" Sheaves, 1-1/8" Wire Rope, 785 lbs.

$4,650.00 187 CA

1 P+H Crane Block - 50 Ton WLL, (6) Sheaves, 3/4" wire rope, Crosby hook, 1,525 lbs.

$4,250.00 187 CA

20 New Skookum BML-12 Snatch Blocks w/ Line Guards - 57,000 lbs. WLL @ 5:1, roller bearing 1-1/8"-1-1/4" W.R. Wt 158lb.

$1,700.00 187 CA

20 New Skookum BML-12 Snatch Block w/o Line Guards - 57,000 lbs. WLL @ 5:1, 155 lbs., roller bearings, 1-1/8 - 1-1/4" wire rope

$1,625.00 187 CA

Sea-Link Quality BlocksConstruction – Marine – Wood Shell – Cargo Hoist - Specials

Manila Rope Models: Wood Shell:

Regular and Extra HeavySteel Shell:

Regular and Malleable Style Snatch Blocks:

Wood and Steel Shell (up to 24")

Wire Rope Models: Regular:

Oval and Diamond PatternConstruction:

Medium and Extra HeavySnatch Blocks:

3 Ton to 12 Ton CapacityCargo Hoist and Fishing

Available: US Government Spec., ABS,

Germanischer Lloyd

Associated Wire Rope & Rigging, Inc.8125 Saran Dr., Playa del Rey, CA 90293Ph: 800.901.1135 Fax: 310.448.5446Email: [email protected]

Waterman Supply Co.910 Mahar Ave., Wilmington, CA 90748Ph: 800.322.3131 Fax: 310.522.1043Email: [email protected]

NORTH AMERICAN STOCKING DISTRIBUTORS:Waterman Supply Co.800.322.3131 or 310.522.9698 Fax 310.522.1043 • [email protected]

Associated Wire Rope & Rigging800.901.1135 or 310.448.5444 Fax 310.448.5446 • [email protected]

All blocks are proof-tested and supplied with Factory Certificates. Special order inquiries welcome.

Twin Systems - Custom Designs Capacities up to 3,500 tons

Snatch & Tilt-Up Blocks Capacities from 22-350 tons

Crane (Hook) Blocks Fast and standard reeve models Capacities from 5-3,500 tons

Swivels Capacities up to 800 tons

Overhaul Balls Capacities up to 350 tons Regular & special application designs

Twin BlockStandard & Fast Reeve Block

Tilt-Up & Snatch Block

MeMber of

Super Reeve Connect Sockets

New

Prod

uCt

WedgeSocket

Innovative Engineering - Superior Quality & Value


BLOCKS WRE CAtALOG


12 NEW Young Snatch Block w/ 35" Sheave, 75 US Ton WLL, 2" wire rope, w/ oblong eye, 2,000 lbs. (can be regrooved up to 3", extra cost)

$5,875.00 187 CA

2 NEW Johnson Snatch Block - 104 Ton WLL, 2" Wire Rope, 1,500 lbs.

$9,500.00 187 CA

3 NEW McKissick model 391T - Snatch Block w/ Swivel Hook (Crosby), 12" Sheave, 10,000 lbs. WLL, 1-1/2" Manila Rope

$375.00 187 CA

4 Like New McKissick Construction Block w/ Eye - 150 Ton WLL, (8) 20" Sheaves, 1" Wire, w/roller bearing

$6,850.00 187 CA

4 Like New McKissick Construction Block w/ Clevis & Pin, C150OCT0RP - 150 Ton WLL, (8) 20" Sheaves, 1" Wire , w/roller bearing

$6,850.00 187 CA

6 NEW Johnson Construction Block - 100 Ton WLL, (6) 20" Sheaves, 1" Wire, w/ roller bearings

$5,500.00 187 CA

8 NEW Johnson Construction Block - 100 Ton WLL, (7) 20" Sheaves, 1" Wire

$5,500.00 187 CA

8 NEW Johnson Construction Block - 100 Ton WLL, approx. 1,600 lbs., (6) 20" Sheaves, 1" Wire w/ Shackle

$5,850.00 187 CA

6 NEW McKissick Double Rig Trawl Block - model 452 w/ 10 Ton WLL, 70 lbs, 12" Sheaves, Sealed Tapered Bearings

$520.00 187 CA

2 NEW McKissick Double Rig Trawl Block - model 452 w/ 20 Ton WLL, 116 lbs, 16" sheave, sealed tapered bearings, swivel eye

$950.00 187 CA

4 NEW McKissick Try-Net Block - model 454, 10 Ton WLL, 36 lbs., 8 inch, qty price listed

$350.00 187 CA

12 #101 - Snatch Block 10 ton Drilled Swivel Eye w/ 1-1/4" SPAS Superlift E44001 140# ea, 16" OD, 1-1/2" Rope (Single Sheave)

$400.00 95 WA

6 #102 - Snatch Block, 1 Sheave, 10 ton Drilled Swivel Eye w/ 1-1/4 SPAS Superlift E44002, 155 lbs. each

$500.00 95 WA

2 #104 - Construction Block, 1 Sheave, 10 ton MCK621, 14" OD, 3/4" W/R

$300.00 95 WA

2 #105 - Construction Block, 1 Sheave, 9 ton MCK831 w/ 1-1/2 SAS, 14" OD, 7/8" W/R.

$300.00 95 WA

13 #106 - Snatch Block, 1 Sheave, 9.85 ton Drilled Swivel Eye 2-1/8 ID 2" Thick Galv BTC, 20" OD, 7/8" W/R.

$500.00 95 WA

6 #107 - Construction Block, 1 Sheave, 19 ton Galv Johnson B19S20R (most no shackle), 20" OD, 7/8" W/R, 250 lbs. ea

$700.00 95 WA

2 #108 - Bail only Skookum 3-1/2 dia x 15-1/2" IL Eyes 4" ID x 2-3/8 Thick 9-3/4-10-1/4 IW

$125.00 95 WA

1 #109 - Bail only Skookum 3-1/2 dia x 18" IL Eyes 4" ID x 2-1/2 Thick 1-3/4 IW

$125.00 95 WA

1 #Young34 - Surplus Young 130T Block, 30" dia., 2"W/R, 1,950 lbs., WLL = 130T @ 3 to 1.

$6,000.00 95 WA

2 #201 - McK 832, 2 Sheave, 14 ton Jaw Top 1-1/2" pin 2" JW, 14" OD, 7/8" W/R.

$400.00 95 WA

1 #202 - McK 312, 2 Sheave, 12 ton Hook Block, 12" OD, 9/16" W/R

$500.00 95 WA

2 #203 - McK 622, 2 Sheave, 20 ton Jaw Top 1-1/2 pin 2" JW, 14" OD, 3/4" W/R.

$500.00 95 WA

1 #204 - Pettibone 2 Sheave, 15 ton Hook Block, 10" OD, 5/8" W/R.

$400.00 95 WA

3 #205 - Miller 212F12.5 12.5 ton Hook Block, 12" OD, 5/8" W/R.

$750.00 95 WA

7 #206 - BTC 6732 24,250# WLL Galv No Fitting 1-1/2" pin, 14" OD, 5/8" W/R.

$400.00 95 WA

2 #208 - McK 433 Snatch 40 ton / 1 ea. No Shackle, 12" OD, 1-1/8"W/R.

$400.00 95 WA

1 #209 - McK 433 Snatch Block, 2 Sheave, 20 ton, 14" OD, 1-1/8" W/R.

$400.00 95 WA

1 #210 - McK 312, 2 Sheave, 15 ton Hook Block, 12" OD, 3/4" W/R.

$600.00 95 WA

1 #211 - Vertical Lead. 3/1-4" shaft 3-3/4" rim. Not fl ush for base mounting. 2 Sheave, 34" OD, 1-3/4" W/R.

$1,200.00 95 WA

1 #301 - McK 603, 3 Sheave Construction Block 55 ton, 20" OD, 7/8" W/R

$2,400.00 95 WA

1 #303 - McK Hook Block, 3 Sheave, 50 ton, 14" OD, 5/8" W/R

$900.00 95 WA

1 #304 - Bail Block 27.9 ton Galv, 18" OD, 1" W/R

$900.00 95 WA


1 #305 - Hook Block, 3 Sheave Johnson 20T12RTB 20 ton 410# ea, 12" OD, 5/8" W/R

$1,200.00 95 WA

1 #306 - No Fitting 47,600# WLL Galv, 18" OD, 3/4" W/R

$600.00 95 WA

1 #307 - Hook 10 Lton Heavy Weight, 14" OD, 7/8" W/R

$900.00 95 WA

2 #308 - 21 ton 3 Sheave Bail w/ Link, 18 $900.00 95 WA

1 #309 - 38 ton Fork 2" pin x 2-1/2 JW, 16" OD, 3/4" W/R

$500.00 95 WA

1 #311 - McK 603, 3 Sheave, 65 ton Bail Block, 24" OD, 1" W/R

$1,900.00 95 WA

2 "#313 - Like Miller 316F40 Hook 40 ton 900# ea, 16""

OD, 7/8"" W/R"

$2,700 95

4 #314 - Base Mtd Vert Deck Lead 3 Sheave, 4"-1/16" Ctr Pin, 24" OD, 1-1/4" W/R

$1,500.00 95 WA

1 #404 - McK 354 45 ton 4 Sheave Hook, 14" OD, 7/8" W/R

$2,100.00 95 WA

1 #405 - Johnson 20Q10RTA 4 Sheave Hook 20 ton, 10" OD, 9/16" W/R, 290# ea

$1,100.00 95 WA

3 "#406 - BTC 5094 4 Sheave, 20 ton Fork 2"" pin 2-1/4 JW Galv, 12""

OD, 5/8"" W/R"

$900 95

3 #407 - 4 Sheave, 40 Lton w/ 2" Chain Skl, 16" OD, 7/8" W/R

$1,600.00 95 WA

1 #408 - McK 724, 4 Sheave 40 ton Bail, 14" OD, 3/4" W/R

$1,400.00 95 WA

1 #409 - Bail 43.2 ton Galv 4 Sheave, 20" OD, 1-1/4" W/R

$1,200.00 95 WA

1 #412 - 4 Sheave Fork 3-1/4 pin 3" JW 42 ton Galv, 21" OD, 7/8" W/R

$1,200.00 95 WA

2 #414 - McK 604, 4 Sheave 50 ton Bail, 17" OD, 3/4-7/8" W/R

$2,900.00 95 WA

1 #415 - 40 ton, 4 Sheave Jaw 3-1/4 pin 3" JW, 20" OD, 3/4" W/R

$1,200.00 95 WA

1 #416 - 25.85 ton Skackle w/ 2-1/2 dia Link, 4 Sheave, 18" OD, 3/4"W/R

$900.00 95 WA

1 #417 - McK 704, 4 Sheave 65 ton 18" OD, 1" W/R

$3,500.00 95 WA

1 #503 - 5 Sheave Bail w/ Link 37 ton, 18" OD, 7/8"W/R

$900.00 95 WA

1 #504 - 5 Sheave Bail w/ Link 50 ton, 20" OD, 1-1/8" W/R

$900.00 95 WA

3 #505 - 5 Sheave 41.7 ton Fork 2-1/2 pin 2-1/2 JW Alvin Campbell 725# ea, 12" OD, 3/4" W/R

$800.00 95 WA

2 #506 - McK 605 5 Sheave Construction Block 120 ton Fork Shackle, 24" OD, 1-1/8" W/R

$6,500.00 95 WA

1 #507 - 5 Sheave 51.3 Lton Fork Eye w/ 3" SCS, 20" OD, 1-1/8" W/R

$2,200.00 95 WA

1 #509 - 5 Sheave 50.1 Lton Fork Eye w/ 2-1/2 SCS, 18" OD, 1" W/R

$1,900.00 95 WA

2 #511 - Skookum 5 Sheave 120 ton 1 ea Fab Eye 5-1/2 pin 4" thick / 1 ea Bail Shackle 3" dia, 24" OD, 1-1/8" W/R

$6,500.00 95 WA

2 #512 - McK 605 5 Sheave Construction Block 65 ton 17" OD, 7/8" W/R

$4,000.00 95 WA

3 #513 - McK 705 120 ton Drill Eye 3-1/2 ID 4-1/2 thick S/N: 2768/2769/2766 No Fitting, 24" OD, 1" W/R

$6,500.00 95 WA

1 #701 - McK 7 Sheave S/N: 1950-507S 75 ton Duplex Hook 3" ctr Pin (E5661), 30" OD, 7/8" W/R

$3,000.00 95 WA

1 #703 - McK 607, 7 Sheave 70 ton Jaw 3" pin 6-1/4 JW, 14" OD, 3/4" W/R

$900.00 95 WA

4 #704 - McK 607 7 Sheave Construction Block 100 ton, 17" OD, 7/8" W/R

$4,500.00 95 WA

8 #801 - McK C150OCT20RH 150 ton w/ hanger (8 sheave) 20" OD, 1" W/R

$6,500.00 95 WA

8 #802 - McK C150OCT20RP 150 ton w/ Link Plate & Load Pin (8 sheave), 20" OD, 1" W/R

$6,500.00 95 WA

2 #803 - McK 608 8 Sheave 150 ton. Yoke Bail Block with 3" plt. 14"w x 56"L. Weight connected to Yoke. 6-3/16" hole set back 7-1/2 in from end. 26" sheave @ tail end attached @ 90?. S/N: 1802/1804, 24" OD, 7/8" W/R

$4,000.00 95 WA

4 #804 - 8 Sheave 2-1/4" rim 4 ea. Top. (18" OD, 7/8" W/R) & 2" rim 4 ea. Bottom (14" OD, 7/8" W/R)

$900.00 95 WA

1 #901 - Long Hanger CG S/N: 700584. No rating. Bent outer cheek. 9742# ea. Good for sheaves. 24" OD, 1-1/8" W/R

$3,500.00 95 WA

1 #1001 - McK 150T Plate Yoke Hanger S/N: 3729 (10 sheave), 24" OD, 1"W /R

$4,000.00 95 WA


Engineered and manufactured to ASMEB30.20 & BTH-1 Design Category B ServiceClass 2.

100% of ALL Peerless Lifting Beams are Proof-Tested to 125% capacity and certificatessupplied at no additional charge.

Express Ship in 10 business days or less.

Express Ship lengths from 4’ to 20’.

Express Ship capacities from 1 to 10 tons.

Express Ship options; beam only, beam withshackles, or beam with shackles and hooks.

Additional Non-Express Ship options; additional lift points, higher capacities, additional lengths, low head-room bail, beamwith integrated beam stands.

This style of lifting beam can be utilized where headroom is limited and comeswith three standard spans (4’ beams have two standard spans).

MADE IN THE USA


2 #1002 - McK 6010 240 ton Construction Block S/N: 7683/7684 (10 sheave), 24" OD, 1-1/8" W/R

$18,000.00 95 WA

1 #601 - 84 Lton Jaw 4-1/2 $3,500.00 95 WA

1 #602 - 220 ton McK S/N: 1125 P K Highline, 30" OD, 1-1/4" W/R (6 Sheave)

$4,500.00 95 WA

4 #603 - Skookum 140 ton Fab Eye 5-1/2" ID 4" Thick /#76-18A, 24" OD, 1-1/8" W/R (6 Sheave)

$6,500.00 95 WA

1 #605 - Base Mtd Vert Decklead No Rate, 24" OD, 1" W/R (6 Sheave)

$3,000.00 95 WA

2 #606 - McK 626 Construction Block 60 ton S/N: 17300/17301, 14" OD, 3/4" W/R (6 Sheave)

$2,400.00 95 WA

4 #607 - McK 606 Construction Block 85 ton S/N: 4902/4903/6762/9570, 17" OD, 7/8" W/R (6 Sheave)

$3,300.00 95 WA

1 #608 - McK 606 75 ton Drill Eye 4" ID 5" thick S/N: 4161, 30" OD, 7/8" W/R (6 Sheave)

$2,900.00 95 WA

2 #609 - McK 606 Construction Block 140 ton S/N: 6473/6474, 24" OD, 1-1/8" W/R (6 Sheave)

$6,500.00 95 WA

6 #610 - McK 706 140T Construction Block S/N: 2771/2774 thru 2778, 24" OD, 1" W/R (6 Sheave)

$6,500.00 95 WA

1 #611 - McK 606 Plate Bail Block 95 ton S/N: 2216, 18" OD, 3/4" W/R (6 Sheave)

$1,100.00 95 WA

1 #612 - Manitowoc 32420 200 ton Fixed Eye 6-1/2" ID x 7" thick. S/N: 3. 3520# ea., 32" OD, 1-3/8" W/R (6 Sheave)

$4,500.00 95 WA

1 #613 - Sheaves in-o-box 3-3/4" rim 5" Hub width 4" shaft, 36" OD, 1-1/4" W/R (6 Sheave)

$6,000.00 95 WA

1 #614 - Base Mtd Vert Lead 2" rim 3-1/2" shaft?. No rating, 24" OD, 1" W/R (6 Sheave)

$2,000.00 95 WA

1 #110 - Forked Bail $125.00 95 WA

1 #111 - Guide Block No Rating Jaw 3-1/2 pin x 3-1/4 JW, 48" OD, 2-1/4" W/R (Single Sheave)

$1,800.00 95 WA

2 #112 - Snatch Galv Western J390/391B Oblong Eye, 12" OD, 1-1/2" Rope (Single Sheave)

$125.00 95 WA

1 #113 - Snatch Galv Western T391B Hook, 12" OD, 1-1/2" Rope (Single Sheave)

$125.00 95 WA

1 #114 - Snatch Galv BTC 3075T Oblong Eye, 14" OD, 1-1/2" Rope (Single Sheave)

$125.00 95 WA

1 #115 - McK J454 10 ton Try Net Galv Oblong Swivel Eye, 8" OD, Single Sheave

$200.00 95 WA

2 #116 - 3" Wide 10 ton Trawl Block Galv ABCII Rd Swivel Eye 2-1/4 ID, 12" OD, Single Sheave

$200.00 95 WA

1 #117 - McK 430 Snatch 40 ton Hook, 12" OD, 1-1/8" W/R (Single Sheave)

$300.00 95 WA

1 #118 - Skookum R8 8 ton Single Sheave, 8" OD, 5/8" W/R

$500.00 95 WA

1 #119 -McK 420 Snatch 15 ton Hook, Single Sheave, 8" OD, 3/4" W/R

$195.00 95 WA

1 #120 - McK 420 Snatch 15 ton Hook, SIngle Sheave, 10" OD, 7/8" W/R

$195.00 95 WA

2 #121 - Pivot Bracket 3" rim. 3-1/2" Hub width 4" TB Shaft, 41-1/4" OD, 1-1/4" W/R (Single Sheave)

$700.00 95 WA

1 #122 - Weight 6" thick x 12" wide x 4' long. 2" GAS each end.

$300.00 95 WA

1 #123 - Skookum Single Sheave Shackle Block 90 ton, 30" OD, 1-3/4" W/R

$600.00 95 WA

2 #124 - Horizontal Decklead. 2" rim 2-1/4" Hub width 2-1/2" pin, 24" OD, 1-1/8" W/R (Single Sheave)

$300.00 95 WA

9 "#125 - 15,150# WLL Galv 1-1/2"" Pin Top No fi tting will take 1-3/8 SKL tight, 14""

OD, 5/8"" W/R (Single Sheave)"

$190 95

2 #126 - Horizontal Decklead. 2" rim 2-1/2" Hub width 3-1/2" pin, 20" OD, 1" W/R (Single Sheave)

$200.00 95 WA

1 #127 - Shackle Top 15.8 ton Shackle Frozen, 18" OD, 1-1/4" W/R (Single Sheave)

$200.00 95 WA

1 #129 - 3-1/2" wide Young #216B No Rate, 16" OD, 1-3/4" W/R (Single Sheave)

$500.00 95 WA

1 #130 - 3" wide Skookum #2616 Long Yoke No Rate, 16" OD, 1-3/4" W/R (Single Sheave)

$500.00 95 WA

2 #131 - MCK601 200 ton Jaw 3-3/4" pin 3-1/2 JW, 36" OD, 1-1/2" W/R (Single Sheave)

$2,000.00 95 WA


3 #133 - Brz/SS Snatch 3000# WLL Western/CG, 16" OD, 3/8" W/R (Single Sheave)

$1,500.00 95 WA

2 #134 - Brz/SS Snatch 10 ton Western/CG, 26" OD, 3/4" W/R (Single Sheave)

$1,500.00 95 WA

5 #135 - Brz/SS Snatch 4000# WLL Western/CG, 22" OD, 1/4" W/R (Single Sheave)

$1,500.00 95 WA

6 16", 35 Ton Snatch Block with 2" Swivel Shackle, 1-1/8" wire rope (can be regrooved to 1-1/4" at extra charge), New, US Govt

$1,475.00 187 CA

1 18" Mc Kissick, Model 341, WLL 20 Ton, 7/8" wire rope, 385 lbs., Excellent Condition

$1,950.00 187 CA

1 New Johnson J30T12RTB; 30 US Ton WLL w/ (3) 12" Sheaves, 5/8" wire rope, w/ latch, 430 lbs.

$2,675.00 187 CA

20 10 Ton Cargo Block, 14", Skookum, Model 614A, "Like New"

$775.00 187 CA

1 20", B & L 3074H, Steel Shell Manila Rope Snatch Block

$975.00 187 CA

1 15 Ton Mc Kissick 10" Model PL-1 Pipeline Block 1" Wire Rope

$875.00 187 CA

1 Johnson J30Q14RTB; 30 Ton WLL, (4) 14" Sheaves, 5/8" wire rope, 620 lbs., NEW Surplus

$2,975.00 187 CA

12 12" Skookum Model BML-12 Snatch Block 1-1/8"-1-1/4" W.R. WLL 55,000 5to1 Roller Bearing New Surplus

$1,375.00 187 CA

1 JOHNSON (10D10BTA) 10 TON 2-SHV BLOCK FOR 1/2" WIRE ROPE PN# 4200-05200

$1,727.05 294 OH

4 Skookum mod 512, 17.5 US Ton WLL,with drilled swivel eye and shackle, .875 - 1 in. wire, 80 lbs, BB, New Surplus

$925.00 187 CA

1 Johnson J25T14RTAB; LIKE NEW, 25 US Ton WLL, 3 Sheave, 5/8" Wire Rope, 490 lbs.

$2,150.00 187 CA

5 Campbell NEW 3072T Wood Shell Snatch Block, safety drop side, oval swivel eye, 10 in. size, 1.25 in M Rope, 6,600 lb WLL

$175.00 187 CA

4 Skookum NEW surplus snatch block, safety dropside, oval eye, 15 Ton WLL, 20 in. 1 in. wire, can go to 1.125 in, 1.5 in. chain shackle

$875.00 187 CA

1 Johnson J5D10RTA; LIKE NEW, 5 Ton WLL, (2) 10" Sheaves, 1/2" wire (can be re-grooved up to 5/8"), 125 lbs.

$975.00 187 CA

2 New Johnson Snatch Blocks, model SB8S8BS, 8.8 US Ton WLL, 8 in. for 5/8 - 3/4" wire, with Swivel Eye and Shackle, 37 lbs.

$275.00 187 CA

5 Skookum Double Sheave Snatch Block, 12 Ton WLL, 8 in. sheaves for 3/4" - 7/8" wire w/ Swivel Eye and 1-1/8" Alloy SPA Shackle, Galv fi nish

$395.00 187 CA

39 10" 8 Ton Swivel Hook snatch Block 3/4" W/R

$112.00 50 TX

34 8" 10T Swivel Shackle Snatch Block 7/8" W/R Korean

$115.00 50 TX

ChainssiZe QtY. desCriPtiOn PriCe Lister ZOne

3,000 3/8" G-80 MECHANICAL COUPLING LINK - INDIVIDUALLY PKG'D - IMPORT

$2.50 32 IN

31,200 3/16" EG Grade 30 NACM proof coil chain .25 / ft. 281 OH

74 3/8" white plastic chain, "10MM, Links are 3"x 1 1/2" each, Each reel 25 Meters long

POR 221 WA

20 5/16" Thick Yellow Plastic Chain, 8MM, Links are 2"x 1 1/8", Each reel is 40 Meters long

POR 221 WA

9 1.5mm (1/16") thick Black, White, Red & Yellow Plastic Chain, Links are approximately 1/4" x 1/8" each

POR 221 WA

30 3/16 P.C. X 250' PAIL $60.00 35 MD

14 Drums 5/8" Gr.70 Chain - 100' per Drum 452.00/Drum 156 SK

36 4/0 x 100 ft galvanized Tenso (double loop) chain

32.00/100 ft 44 IL

3000 1/4 alloy hoist chain $1.44 102 TX

5 2-5/8 5 shots stud link anchor chain, excellent

$2,035.00 427 CA

5 2-3/4 surplus stud link chain, in 90' shots $2,150.00 427 CA

9 1-3/8" 90' Shot Di-Lok Anchor Chain - excellent

$400.00 95 WA


BLOCKS-CHAINS WRE CAtALOG

• Eyebolts• Nut Eyebolts• Turnbuckles &

Fittings• Rod Ends• Eye Nuts• Pad Eyes• Strap Clamps• T-Slot Nuts

• Set-Up Wedges• C-Clamps &

Screws• D-Rings & Clips• Swivel Hoist

Rings• Custom

Forgings - Up to 200 lbs.

• In Stock

Carbon • Alloy • Stainless

More Than 40 Years of Superior Quality and Service

Forged Industrial Hardware

• Eye Nuts• Eye Nuts• Pad Eyes• Pad Eyes

Toll-Free: 888-KEN-FORGING (536-3674) Phone: 440-993-8091 • Fax: 440-992-0360

www.KenForging.com • E-mail: [email protected]

All Products Proudly Made in The USA


CHAINS-CLIPS WRE CAtALOG

ChainssiZe QtY. desCriPtiOn PriCe Lister ZOne


$820.00 95 WA


$1,475.00 95 WA

10 2-1/4" 90' Stud Link Anchor Chain - excellent

$1,475.00 95 WA

100+ 1" thru 3" random lengths anchor chain - good

.25/lb. 95 WA

182 5/16 GR.30 BBB CHAIN POR 171 BC

25,000 FT 1/16" PLASTIC CHAIN (RED,WHITE,BLACK,YELLOW)

$0.24 221 WA

7000 5/16" PLASTIC CHAIN (YELLOW) .60/FT 221 WA

7,000 10 mm Plastic Chain $0.75 221 WA

11x100 Campbell 4/0 straight link bright zinc machine chain

$0.90 43 IL

300 #28) 3/4"x20' Acco GR8 chain w/ eye grab hook one end (LL)

125.00ea 95 WA

240 #27) 3/4"x8' Acco GR8 chain w/ eye grab hook one end (LL)

75.00ea 95 WA

300 #7) 1-1/4"x18" Korean Jaw & Jaw turn-buckle galv (LL)

65.00ea 95 WA


55.00ea 95 WA


85.00ea 95 WA

7 STUD LINK CHAIN 1/2"X90' GALV. $200.00 48 BC CAN

5 BOXES #35 ZINC PLATED CHAIN 100FT ROLL $6.00 102 TX

400 3/8" Grade 80 Alloy CM Hammerlok $7.00 187 CA

200' 3/16 S.C. PROOF COIL - RUST $0.10 35 MD

48' 1/2" 316 Stainless Steel Chain-Import 6.75/FT 420 FL

500 1/4" x 9 Link Proof Coil, Yellow Chromate, Laclede

$0.60 351 WI

900 1/4" x 15 Link Proof Coil, Yellow Chromate, Laclede

$0.95 351 WI

200 ft 3/4" G30 Proof Coil HDG 5.10/ft 355 NY

2750 ft 5/16" G30 Proof Coil Stainless Steel T-316

3.80/ft 355 NY

3 TRANSPORT CHAIN G70 1/4"X800 FT - NACM 90

$495.00 355 NY

3 1/8" T316 G30 Proof Coil - Stainless Steel (2000 ft drums)

1751.00/Drum

355 NY

22 3/16x750' G30 HDG ITEM 702168 $247.50 526 MN

39 1/2 x 40 G30 HDG ITEM 702375 $89.60 526 MN

15 1/2 X 100 G30 HDG ITEM 702378 $223.00 526 MN

76 1/4X141 G43 HDG ITEM 705215 $90.24 526 MN

95 5/16 X 92 G43 HDG ITEM 705255 $90.16 526 MN

39 3/8 X 63 G43 HDG ITEM 705295 $80.64 526 MN

290 JACK, SINGLE STEEL EG 10X125' REEL ITEM 775816

$15.00 526 MN

71 10x100 Decor Chain Antq Brass Item 790829

$18.00 526 MN

200 10X100 DECOR CHAIN BRASS ITEM 791829

$18.00 526 MN

197 10X60 DECOR CHAIN NICKEL ITEM 794826

$10.80 526 MN

2000 LOG CHAIN 5/16X14 G43 S/C GRAB&SLIP 8/PAIL ITEM 817395 UPC-A BARCODE TAG

$15.00 526 MN

540 LOG CHAIN 3/8X16 G43 S/C GRAB & SLIP UPC-A BARCODE 5/PAIL ITEM 817445

$18.43 526 MN

1014 BINDER CHAIN G70 Y/C GRAB & GRAB 6/PAIL UPC-A BARCODE TAG ITEM 818415

$17.47 526 MN

360 BINDER CHAIN G70 Y/C GRAB & GRAB 20/DRUM UPC-A BARCODE TAG ITEM 818417

$17.13 526 MN

70 5/16X275' G43 S/C UPC-A BARCODE TAG ITEM 704258

$215.00 526 MN

200 1/2X100' G43 S/C ITEM 704378 $180.00 526 MN

3000 5.5mm SS T316 NACM HT CHAIN $2.73 359 IL

400 1/4" CHAIN PROOF COIL G30 ZINC $0.49 359 IL

1600 1/4" CHAIN PROOF COIL T304 $2.89 359 IL

3000 7mm SS T316 NACM HT CHAIN $4.24 359 IL


20 5/16" X 20' G70 BINDER CHN-GLD $23.52 359 IL

24 5/16" X 25' G70 BINDER CHAIN P $28.90 359 IL




ClampssiZe QtY. desCriPtiOn PriCe Lister ZOne

7 22MK Lifting clamp $251.00 100 IL

8 2 1/4" CROSBY DF CLIP $80.00 9 Co

EA VANGUARD 3 TON PLATE CLAMP $245.27 2 LA

EA 3 TON PLATE CLAMP REPAIR KIT VANGUARD

$89.84 2 LA

975 3/8" Crosby SS-450 Type 316 SS Drop Forge Clips Stock # 1011283

$17.75 187 CA

ClipssiZe QtY. desCriPtiOn PriCe Lister ZOne

364 7/8" Malleable Wire Rope Clip (1900107182)

$0.65 139 PA

560 4mm-5/32" Type 304 SS Wire Rope Clip (1012261182)

$0.25 139 PA

12 1 1/4 G.D.F. DOMESTIC (HUBBARD) (LOOK NEW)

$5.00 35 MD

550 Crosby G-429 New Style Fist Grips, 7/16" - 1/2", Galv., New

$7.25 187 CA

1 1 1/8 x 6 round ring, Crosby $42.72 397 NJ

4 9/16 - 5/8 fi st grips, Crosby $10.20 397 NJ

6 3/8 piggyback clips, import $6.00 397 NJ

1,000 3/4 drop forged wire rope clips, import $1.55 397 NJ

9162 1/2 VAN BEEST DROP FORGE WIRE ROPE CLIP 4000-00019

$1.00 294 OH

16 1 3/4' DROP FORGED CLIP 4000-00020 $48.00 294 OH

200 5/8' D.F. CLIP IMPORT 4025-00122 $1.20 294 OH

240 2.1/2" Drop Forged Wire Rope Clip, Galvanized, KOREA

45.00/ea 50 TX

350 3/4" Drop Forged Wire Rope Clip, SS-316 15.00/ea 50 TX

1000 7/8 Mall Clips sc $0.38 102 TX

1400 5/8" DF, Dom $1.10 427 CA

750 1-1/4 DF clips, dom $7.25 427 CA

3,000 5/8", Durbin Durco, D.F Clips, Domestic, Galv., New Surplus

$0.95 187 CA

35 2-1/2 Galv. Drop Forged ClipsJapan $28.75 187 CA

60 7/8" Crosby G-450 Drop forged clip $8.80 187 CA

2,000 5/8" Fist Grips, New, Domestic, Presco USA

$1.35 187 CA

2000 1" Galv DF clips POR 426 FL

6 1-3/8 galv malleable $1.00 35 MD

200 7/8 SS DF $6.00 35 MD

18 CROSBY CLIP 7/16 redbook less 48 BC CAN

1283 CROSBY FIST GRIP CLIP 3/16 offers 48 BC CAN

450 1-1/4 Galv Forged Wire Rope Clip-Import (1010275182)

$3.50 139 PA

20 1/8" Crosby G-450 Drop Forged Clips $1.25 187 CA

75 3/16" Crosby G-450 Drop Forged Clip $1.45 187 CA


600 3/8" Crosby G-450 Drop Forged Clips $2.25 187 CA

141 1" Crosby G-450 Drop Forged Clip $9.75 187 CA



25 1-1/8" Crosby G-450 Drop Forged Clip $10.75 187 CA



50 3/4" CM Midland Drop Forged Clips $5.25 187 CA


60 7/8" Crosby Drop Forged Clip $8.80 187 CA

1500 5/8" Crosby G-450 DF Clips $1.50 187 CA

375 7/8" DROP FORGED WIRE ROPE CLIPS - IMPORT

$3.10 44 IL

1,000 1/2 Galv. DF Clips, China $1.00 275 OR

12 2-1/4" Drop Forged Clip-Import $15.00 421 SC

92 1 1/2" Drop Forged Galvanized Import Wire Rope Clips

$7.29 2 LA

295 5/8 DROP FORGE CLIP (CHICAGO) REFER TO PN 4000-00018

$2.70 294 OH

13 1/2" DROP FORGE CLIP (CHICAGO) 2.00 PER 294 OH

45 7/8 FIST GRIP CLIP (CROSBY 1010596) PN# 4000-00037

$22.73 294 OH

550 7/8" Crosby Drop Forged Wire Rope Clips, G-450, NEW IN BAG

$9.25 187 CA

7,800 3/16" WIRE ROPE CLIP MALLEABLE SS T304

$0.80 355 NY

50 2" WIRE ROPE CLIP DF HDG $29.50 355 NY

100 3/8" WIRE ROPE CLIP DF SS $3.90 355 NY


CLIPS-EYEBOLTS WRE CAtALOG

ClipssiZe QtY. desCriPtiOn PriCe Lister ZOne

2,000 1/4" WIRE ROPE CLIP MALLEABLE SS T304

$0.99 355 NY

968 1/8 SS304 $0.54 86 KY

875 3/16 SS304 $0.49 86 KY

324 1/4 SS304 $1.09 86 KY

667 3/8 SS304 $1.34 86 KY

376 1/2 SS304 $1.98 86 KY

302 5/8 SS304 $4.13 86 KY

120 3/4 SS304 $3.12 86 KY

25480 1/16 Mall Clip $0.08 86 KY

28595 1/8 Mall Clip $0.09 86 KY

6054 3/16 Mall Clip $0.10 86 KY

7657 1/4 Mall Clip $0.13 86 KY

10911 5/16 Mall Clip $0.15 86 KY

557 3/8 Mall Clip $0.20 86 KY

618 7/16 Mall Clip $0.28 86 KY

5457 1/2 Mall Clip $0.34 86 KY

1443 9/16 Mall Clip $0.55 86 KY

5152 5/8 Mall Clip $0.69 86 KY

278 7/8 Mall Clip $1.08 86 KY

827 1 Mall Clip $1.29 86 KY

157 1-1/8 Mall Clip $1.39 86 KY

2985 3/4 Mall Clip $0.78 86 KY

500 5/8" Drop Forged Wire Rope Clips - ALTCO (American Logging Tool Company) Domestic w/ Cadmium Finish. NEW Surplus

$1.25 187 CA

12 "1-1/8"" CROSBY G-429 GALVANIZED 25.00 EACH 217 GA

2,933 1/16 Malleable clips - Import $0.06 420 FL

200,000 "1/16 MALLEABLE CLIPS ZNC PLATE ITEM 070029

$0.04 526 MN

50,000 "1/8 MALLEABLE CLIPS ZNC PLATED ITEM 070129

$0.06 526 MN

200,000 "1/8 MALL CLIP ZNC PLATED ITEM 070120

$0.06 526 MN

30,000 "3/16 MALLEABLE CLIPS ZNC PLATE ITEM 070169

$0.09 526 MN

30,000 "1/4 MALLEABLE CLIP ZNC PLATE ITEM 070219

$0.15 526 MN

30,000 "1/4 MALLEABLE CLIP ZNC PLATE ITEM 070210

$0.15 526 MN

23,000 "5/16 MALL CLIPS ZNC PLATE ITEM 070259

$0.16 526 MN


$0.16 526 MN


$0.24 526 MN

46 3/4" GALV FIST GRIP FORGED $2.07 359 IL

95 7/8" MALLEABLE CLIP GALV $0.38 359 IL

681 7/8" DF $14.93 359 IL

24 2.3/4" Drop Forged Clip Korean $68.00 50 TX

100 1" SS 304 Cast Malleable Style Clip $6.50 50 TX

50 3" DF Wire rope Clip $70.00 50 TX

EquipmentsiZe QtY. desCriPtiOn PriCe Lister ZOne

4 55 ton hydraulic cylinder SPX model RD556 - new

$700.00 399 MN

1 HEAVY DUTY Wire Rope Counters POR 287 TX

1 TURNTABLES 30 $1,150.00 7 TN

1 TURNTABLE 36 $1,200.00 7 TN

10 TURNTABLE 48 $1,380.00 7 TN

10 TURNTABLE 60 $1,550.00 7 TN

10 TURNTABLE 72 x 3/4 $2,700.00 7 TN

2 5000 lb shaft type winding machine all hydraulic variable speed

$11,500.00 7 TN

1 200K Lucker Test Machine with 2-1/2" Lucker grip

Call 187 CA

1 Reel-O-Matic Model B12A High Speed Wire Spooler ( 250LB Cap ) 3/8 Max Wire Size Automatic Spooling & Measure

$6,500.00 187 CA

10 20 inch and 24 Coiling heads $1,300.00 7 TN

12 SeaLink Model SL2 Riggers Vise 3/8" - 1-1/2" Wire Rope

$1,375.00 187 CA

7 Riggers Vise Sea Link # 3 Model 1-5/8" - 2-1/2"

$1,975.00 187 CA

12 Sea Link Model #1 Rigger Vise 3/16" - 5/8" $750.00 187 CA

4 Rigger Vise "Sea Link" #3ELJ Model 1-5/8"-3-1/2" Wire

$2,475.00 187 CA

1 2-1/2" Lucker housing w/grip, w/ wedge and rams

Call 187 CA

1 15000 LB GANTRY STYLE WINDING MACHINE

$31,600.00 7 TN

EquipmentsiZe QtY. desCriPtiOn PriCe Lister ZOne

3 #2) Forklift Boom attachment, 600lb SWL Model LMEBT16000 (LL)

$1,500.00 95 WA

6 #23) Reel stand w/ fork pockets, orange color (LL)

$500.00 95 WA

3 GS5 Take-up all hydraulic 4000 lb reels 38

$16,000.00 7 TN

10 NEED NEW EQUIPMENT www.cumberlandsalescompany.com

$5,800.00 7 TN

1 10 ton Harrington Air Chain Hoist complete with 30 ft of lift

$15,500.00 156 SK

1 ATI Portable Aircaft Cable Proof Tester $3,500.00 187 CA

1 2-1/2" Lucker Grip with Wedge $12,500.00 187 CA

1 2-1/2" Lucker Housing with 2-1/2" Wedge and Mount New

$13,500.00 187 CA

1 Pell Hydrashear mod. W-075 cable cutter; up to 3/4", new, $350

$350.00 187 CA

400 Empty wood reels, 24" - 30" dia., steel core

$12.00 369 Ohio

2 Single meter stand with guides and side slide.

$775.00 7 TN

1 Simplex RC603 Center Hole Cylinder. 60 Ton, 3" Stroke, Never Used

$975.00 351 WI

1 ZE-3408MB ENERPAC PUMP $3,000.00 44 IL

1 ZE3408MB ENERPAC PUMP $3,000.00 44 IL

1 ZE4408MB ENERPAC PUMP $3,700.00 44 IL

1 ZE4008WB ENERPAC PUMP $3,750.00 44 IL

11 "Warehouse Light - 250 watt 220Volt, MH HID,

$40.00 32 IN

24 "Warehouse Light Hi-Bay - 400 watt 277Volt, MH HID,

$40.00 32 IN

1 "Rigrite heavy duty sheet lifter: $10,700.00 517 AR

1 "Custom built lift beams to your specs. We can private label with your logo or build you a custom beam. All of our beams meet the ANSI B30.20 of Struc-tural and Mechanical Lifters, Below the hook lifting devices. All lifters have a 5:1 design factor based on ultimate strength.

call for price 517 AR

1 "Rigrite.US 5 ton lift beam: $2,600.00 517 AR

Eye NutssiZe QtY. desCriPtiOn PriCe Lister ZOne

4,000 #1 Eye Nut Forging, Galvanized .24/ea 50 TX

4,000 #5 Eye Nut Forging, Galvanized 1.40/ea 50 TX

1,000 #2 Eye Nut Forging, SC .42/ea 50 TX

1800 #5 Eye Nut Forging, SC 1.25/ea 50 TX


1,200 #8 Eye Nut Forging, SC 3.45/ea 50 TX


200 #11 Eye Nut Forging, SC $19.90 50 TX

14,000 EYE NUTS 5/8 $1.25 7 TN

14 CROSBY EYE NUT 3/4 redbook less 48 BC CAN

133 3/4" GALV WITH 7/8 NC $1.30 359 IL

20 #11B 2.1/4" RH Tap 1.1/2" Bail SC Eye Nut

$48.00 50 TX

20 #11C 2.1/2" RH Tap 1.1/2" Bail SC Eye Nut

$48.00 50 TX

24 #11 2" RH Tap 1.1/2" Bail SC Eye Nut $42.00 50 TX

1500 #2 SS T316 Forged Eye Nut Blank $2.95 50 TX

500 #3 SS T316 Eye Nut Blank $4.95 50 TX

EyeboltssiZe QtY. desCriPtiOn PriCe Lister ZOne

770 3/8" x 8" Galv Reg. Nut Eyebolt-Imp (1043349202)

$1.87 139 PA

1800 1/2 X 3 GALV REG WITH NUT $0.60 35 MD

60 5/8 X 4 S/S SHOULDER EYEBOLT WITH NUT

$5.00 35 MD

7 1 X 12 G291 EYE BOLTS POR 171 BC

6 Import galv 1/2 X 10 REGULAR NUT EYE BOLT

POR 171 BC

40 5/8x21 galv. eyebolt w/nut $3.25 35 MD

300 5/16 x 4-1/4 S/S Shoulder $2.00 35 MD

1,100 10 mm x 35 mm Metric Shoulder Eyebolts

$0.55 221 WA

58 1 X 2 1/2 TYPE 316 S/S MACHINE EYEBOLTS

$16.00 35 MD

1000 5/8" x 6" Shoulder Eyebolt HDG w/nut $2.88 355 NY

244 1/4 x 4 Shoulder Nut $0.37 86 KY

70 5/16 x 2-1/2 Shoulder Nut $0.40 86 KY

76 5/16 x 4-1/2 Shoulder Nut $0.50 86 KY

96 3/8 x 2-1/2 Shoulder Nut $1.32 86 KY

Time Tested and Work ProvenCrosby’s industry leading brands are time tested and work proven. The result is reliable products of uncompromising quality that performs to the highest standards throughout the world. Crosby is a market leader because of our unrelenting drive for excellence. For more than 120 years, a strong commitment to quality has been evident in every aspect of our business.

Customer Service - More than available product…It’s meeting customer needs, product knowledge

Complete Product Line - Most complete in the industry, off-the-shelf or custom design

Research & Development - Innovative products and services, with many industry ‘firsts’

Risk Management - “Industry first” comprehensive product application instructions, world class training

Manufacturing - Quality process – purchases through production and testing

Engineering - State-of-the-art product design systems, and fully equipped metallurgy lab

With a complete line of “off-the-shelf” blocks, sheaves and fittings designed to be used with wire rope, chain or synthetic slings, and the ability to custom design products for any lifting application, no lift is too big. We are The Heavy Lift Specialist!

www.thecrosbygroup.com


WRE CAtALOG

EyeboltssiZe QtY. desCriPtiOn PriCe Lister ZOne

24 1/2 x 3-1/4 Shoulder Nut $1.80 86 KY

82 5/8 x 6 Shoulder Nut $2.64 86 KY

82 1/4 X 2 Regular Nut $0.52 86 KY

12 1/4 x 4 Regular Nut $0.58 86 KY

200 5/16 x 2-1/2 Regular Nut $0.30 86 KY

100 5/16 x 4-1/2 Regular Nut $0.35 86 KY

61 3/8 x 6 Regular Nut $1.01 86 KY

118 1/2 x 2 Regular Nut $0.53 86 KY

8 1/2 x 12 Regular Nut $4.56 86 KY

2 5/8 x 6 Regular Nut $1.92 86 KY

20 5/8 x 8 Regular Nut $2.22 86 KY

23 5/8 x 10 Regular Nut $1.69 86 KY

47 5/8 x 15 Regular Nut $2.94 86 KY

35 5/8 x 18 Regular Nut $5.28 86 KY

168 3/4 x 4-1/2 Regular Nut $2.28 86 KY

44 3/4 x 6 Regular Nut $2.88 86 KY

3 3/4 x 8 Regular Nut $3.12 86 KY

14 1 x 6 Regular Nut $7.80 86 KY

900 3/8"-16 x 1-1/4" Ken Forging Shoulder Eyebolt New

$1.10 351 WI

135 1/2" x 6" SHOULDER EYEBOLT $0.60 359 IL

1200 1/2" X 1-1/2" GALV SHOULDER EYEBOLT $0.64 359 IL

1200 1/4" x 4" Shoulder Nut Eye Bolt Taiwan $1.05 50 TX

HoistssiZe QtY. desCriPtiOn PriCe Lister ZOne

2 20 Ton Air Chain Hoists, IR, 27' lift, hook mounted, excellent. tested/certifi ed.

$12,900.00 427 CA

4 "Pendant, Conductix Series 80, 6-Button, On/Off, Up/Down 2-Speed,

$148.00 351 WI

1 Pendant, CM 4-Button Toggle Switch Style, Arrow Up, Arrow Down, Arrow Left, Arrow Right. All 1-Speed. 7 Feet Overall Length.

$50.00 351 WI

2 "Pendant, Lift Tech 4-Button Up, Down, Arrow Right, Arrow Left. All 1-Speed. 7 Feet Overall Length.

$40.00 351 WI

1 Pendant, Lift Tech 6-Button On, Off, Up, Down, Arrow Right, Arrow Left, All 1-Speed. 10 feet overall length.

$50.00 351 WI

1 "CM Lodestar 2 Ton, 15' Lift, 16 FPM, Top Hook Mount,

$2,650.00 351 WI

HookssiZe QtY. desCriPtiOn PriCe Lister ZOne

500 5 TON CARBON HOIST HOOKS 8.00 EA. 35 MD

400 3/4 Ton Galv. Boat Winch Hook-Eye Type w/ Latch (1022200202)

$0.75 139 PA

500 3/4 TON CARBON W/LATCH ZINC PLATED

$1.30 35 MD

40 8 TON WELD ON $36.00 35 MD

2 2BL-B manual closing gate-Golden Gate hood 2D, McKissick

$25.00 397 NJ

80 1/2 s.c. eye slip hook, IMP $2.75 397 NJ

2 4WS-22 ST ST Swivels SWL 3200 Kg, Korean

$225.00 397 NJ

5 Spider staging hooks, ESCO $12.00 397 NJ

80 pcs 1 1/2 ton shank Crosby hooks $2.86 397 NJ

72 pcs 2 ton shank Crosby hooks $4.62 397 NJ

700 3/8 G80 Clevis Sling Hook w/latch 11.00/ea 50 TX

1038 1" Snap hook - 3K $0.69 420 FL

40 3/4 Alloy Eye grab hooks, crosby $10.00 9 Co

1640 Midget hook $1.70 102 TX

6 50T wash chain quick release hook $2,250.00 427 CA

8 150T Wash chain quick release mooring hook

$2,250.00 427 CA

22 7T Midland Hook, Alloy Eye, Galvanized, New

$17.75 187 CA

100 10T Crosby 322C Hook w/ HD Flapper Latch, Carbon Swivel Eye, New

$65.00 187 CA

90 11T Crosby 322A Hook w/ HD Flapper Latch, Alloy Swivel Eye, New

$78.50 187 CA

12 11Ton Crosby Alloy Swivel Hook New Style L322AN with Latch Kit

$150.00 187 CA

160 5/8 Clevis Slips, Grade 40, Zinc Plated,China

$2.00 225 MD

1640 Hooks, midget, $1.75 102 TX8 LIGHT BEAR CLAW HOOK POR 171 BC164 3/4" Grade 43 Clevis Grabs, Zinc Plated,

Imported ( Surplus)$3.75 225 MD

34 1/2 IMPORT CARBON CLEVIS SLIP HOOKS

POR 171 BC

13 1/2 GUNNEBO OKN13-8 SLING HOOK C/W LATCH

POR 171 BC


28 9/32 CM GR 80 EYE GRAB HOOKS POR 171 BC

8 3/8 CM GR80 EYE SLING HOOK POR 171 BC

2 Crosby 1/4 H331 CARBON CLEVIS SLIP HOOKS

POR 171 BC

8 Newco #2 bale hook POR 171 BC

3 Crosby 1/2 S314A HOOK W/LATCH POR 171 BC

189 Import 5/16 GR6 CLEVIS GRAB HOOKS POR 171 BC

3,500 1/2" CARBON EYE GRAB HOOK - DOMESTIC

$3.50 221 WA

2000 1/4" CARBON EYE GRAB HOOK - DOMESTIC

$1.00 221 WA

5,000 3/8" CARBON EYE GRAB HOOK - DOMESTIC

$1.75 221 WA

10,000 5/16" ZINC PLATED "S" HOOK $0.20 221 WA

1,500 3/4 TON GALV CARBON EYE HOIST HOOK

$2.50 221 WA

2,000 7/16" DROP FORGED SNAP HOOK $2.00 221 WA

150 5/8 eye foundry hook w/handle $95.00 43 IL

2 Eye foundry hook 1" $225.00 43 IL

100 1 1/4 domestic gr 43 eye grab hook S.C. $0.80 43 IL

80 3/8 Gr 43 clevis slip hook S.C., Dom. $2.50 43 IL

6 #1) Quick Release Hook 150 ton (LL) $3,000.00 95 WA

300 5/8 sliding choker hook $6.75 35 MD

250 3/4 sliding choker hook $12.00 35 MD

40 7/8 - 1 sliding choker hook $48.00 35 MD

2,000 5/16 eye slip hook $0.40 35 MD

1 CROSBY BARREL HOOK S-377 (2PC) redbook less 48 BC CAN

1 CROSBY HOOK 3/8 redbook less 48 BC CAN

5 CROSBY HOOK 3/8 redbookless 48 BC CAN

7000 SPRING HOOK 5/16" $0.28 48 BC CAN

10 Acco Vulcan G8 3/4 Swivel Hoist hook $146.00 225 MD

1 SHANK HOOK 200 Ton Crosby 319A 20 $11,000.00 230 TN

1 SHANK HOOK 37 Ton Crosby 319A 15" shank

$1,050.00 230 TN

1 SHANK HOOK 25 Ton Crosby 319C 15" shank

$850.00 230 TN

50 EYE HOIST HOOK 4 Ton carbon Camp-bell #28 self colored

$20.00 230 TN

1 RENFRO 15 ton Swivel self locking hook $700.00 230 TN

50 3/4 CROSBY HT EYE GRAB HOOK H323 $10.00 230 TN

50 1/2" Stainless steel Eye Grab Hooks T316 $6.50 54 CA

100 ESMET 5/16 socket & hook swivel roller bearing type weighted; 11 lbs

$71.50 230 TN

18 1/2" EYE GRAB HOOKS G-80 (CROSBY) $20.00 102 TX

1 7/8" HERC ALLOY HOOK W/O LATCH (CM) $62.50 102 TX

1 3/4" EYE GRAB HOOK (CROSBY) $23.50 102 TX

1105 5/16"-3/8" EYE GRAB HOOK HI TEST RED COLOR

$1.00 102 TX

4 1/2" clevis B K G 13-10 $66.00 35 MD

12 3/8" Clevis B K - 10-10 $49.00 35 MD

23 1/4 GR80 Clevis grab CM (not for lifting)

$1.90 35 MD

6 3/4 Crosby Eye Foundry $138.00 35 MD

12 22ton Alloy Swivel Eye Hoist Hooks w/latch Chinese

$75.00 54 CA

500 3/8" Clevis Slip G43 Hooks w/o latches Chinese

$1.10 54 CA

6 7-1/2 Ton L322CN Carbon Crosby Swivel Hook with Latch

$130.00 187 CA

12 7 Ton AlL-322AN Crosby Swivel Hook With Latch Kit

$100.10 187 CA

4 5 Ton Carbon L-322CN Crosby Swivel Hook with Latch

$75.00 187 CA

1 15 Ton Alloy L322AN Crosby Swivel Hook With Latch

$200.00 187 CA

14 7 Ton Alloy L-320AN Crosby Eye Hook with Latch

$40.00 187 CA

1 22 Ton Alloy L-320AN Crosby Eye Hook with Latch

$240.00 187 CA

1 5 Ton Carbon L-322CN Crosby Eye Hook with Latch

$35.00 187 CA

400 3/8" Weissenfels Grade 80 Alloy SL10 Self Locking Hook

$25.00 187 CA

2 150-165 Ton Crosby A319 Shank Hooks Machined with Nut

$3,500.00 187 CA

6 CM Eye Lodelok Hook 5/8" -16MM Herc-Alloy 1000 ( 626020)

$68.00 187 CA

4 CM, Swivel Herc1000 Alloy Lodelok Hook, 1/2" (676015)

$58.00 187 CA

EYEBOLTS-HOOKS

Lifting EquipmentDesign Engineering Manufacture

+1 412 436 6162

www.modulift.com

Modular Spreaders for 2 - 5000 ton loads & spans up to 174’

Rig planning, custom design service, lifting & rigging training

AFRICA - ASIA - AUSTRALIA - EUROPE - MIDDLE EAST - NORTH AMERICA - SCANDINAVIA - SOUTH AMERICA

Visit us at OTC, booth #1378 and at the Holland Pavilion, booth #2531

E-mail: [email protected] www.vanbeest.com Member of Van Beest International

Registered trade marks ‘Green Pin’ and ‘Excel’

Van Beest B.V. is manufacturer and supplier of wire rope- and chain accessories withbranches in The Netherlands, Germany, France and USA. There are stock holdingdistributors of Van Beest products in over 80 countries worldwide.

Manufacturer of Green Pin® shackles: a genuine made in Holland product.

Question to ALL Fabricators of Slings and Lifting Equipment...

5 to 1 - You Are reading this ad

5 to 1 - You Will be Curious to learn more

5 to 1 - You Realize the benefits of becoming a member

5 to 1 - You Find time to Join

ARE You in the Loop?

Associated Wire Rope Fabricators“An association serving the lifting, rigging, and load securement industry”

PO Box 748, Walled Lake, MI 48390(800) 444-2973 Fax (800) 666-2973

Email: [email protected] Website: www.awrf.org


HOOKS-LINKSWRE CAtALOG



4 5/8", Crosby S-1317, Clevis Hook $145.00 187 CA

40 3/4" Campbell-BTC, High Test Eye Grab Hook, Galv.

$1,575.00 187 CA

40 3/4" Campbell, High Test Clevis Grab Hook, Galv

$18.85 187 CA

4 Crosby-Bullard BL-C Hook Size 6C $125.00 187 CA

2 Gunnebo BK-7/8-8 Safety Hook $36.75 187 CA

1 Crosby S-6, 10 Ton Hook w/ Swivel & latch

$400.00 187 CA

13 BKG-10-8 CLEVIS SELF LOCKING GUNNEBO

$58.00 35 MD

4 BKG-13-8 CLEVIS SELF LOCKING GUNNEBO

$75.00 35 MD

1 BK-5/6-8 EYE SELF LOCKING GUNNEBO

$28.00 35 MD

1 BK-16-8 EYE SELF LOCKING GUNNEBO $105.00 35 MD

4 GBK-13-8 GRIP LATCH CLEVIS LOCKING GUNNEBO

$68.00 35 MD

5 OBK-16-8 GRIP LATCH EYE SELF LOCKING GUNNEBO

$104.00 35 MD

1 LKN-7/8-8 EYE SWIVEL SLING GUNNEBO $32.00 35 MD

1 LKN-13-8 EYE SWIVEL SLING GUNNEBO $56.00 35 MD

258 1/4 G-40 Clevis grab hooks, China $0.70 275 OR

107 5/16 Clebis grab hooks, China $0.90 275 OR

397 3/8 G-40 clevis grab hooks, China $0.75 275 OR

145 1/4 G-40 Clevis slip hooks, China $0.70 275 OR




390 5/16 ZP G-40 eye slip hooks, China $80.00 275 OR

48 1/2 ZP G-40 Eye slip hooks, China $2.00 275 OR

97 3/8 ZP G-40 Eye slip hooks, China $1.00 275 OR

12 5/8" HT SLIP HOOKS CM $12.00 9 Co

400 Campbell Chain model 477H Eye Grab Hook, New Surplus, WLL 16,200 lbs., CALL FOR QUANTITY PRICES

$15.75 187 CA

60 BTC mod C28 Eye Hook w/ Latch; 4 Ton WLL, NEW SURPLUS

$15.75 187 CA

554 1 T Alloy Eye Hook with Latch $2.08 336 IL

444 1 1/2 T Alloy Eye Hook with Latch $2.94 336 IL





18 4,500 LBS Alloy Swivel Hook with Latch 9/32"- 5/16"

$13.65 336 IL

19 7,100 LBS Alloy Swivel Hook with Latch 3/8"

$23.03 336 IL

16 12,000 Alloy Swivel Hook with Latch 1/2" $35.44 336 IL

46 3/8 GR 70 Clevis Slip Hook Self Colored $1.20 86 KY

53 5/8 GR70 Clevis Sling Hook $9.55 86 KY

80 3/4 GR 70 Clevis Sling Hook $11.22 86 KY

100 3/8 HT Clevis Grab Hook Self Colored $1.51 86 KY

157 5/8 GR70 C;evis Grab Hook $5.69 86 KY

190 5/16 HT Eye Grab Hook Zinc Plated $0.66 86 KY


383 3/4 T Alloy Eye Hook w/Latch $0.63 86 KY

47 11 T Alloy Swivel Hook w/Latch $33.84 86 KY

21 15 T Alloy Eye Hook w/Latch $27.12 86 KY

158 9/16 Snap Hook $1.46 86 KY

2200 5/16 HT Swivel Clevis Hook w/latch $1.13 86 KY

200 1/2 HT Clevis Grab Hook Zinc Plated $2.06 86 KY


1.11 3/8 HT Eye Grab Hook Zinc Plated $150.00 86 KY

1100 3 T Alloy Eye Hook w/Latch $1.86 86 KY

8 7/8 Reverse Eye Hook $6.00 221 WA

150 PCS 1/4"-5/16" GR 80 Positive Locking hook with swivel eye.

$9.95/ea 248 MB CAN

450 PCS 3/8" GR 80 Positive Locking Hook with swivel eye.

$16.85/ea 248 MB CAN

200 PCS 1/2" GR 80 Positive Locking Hook with swivel eye.

$37.65/ea 248 MB CAN

250 PCS 1/4"-5/16" GR 80 Positive Locking Hook with clevis.

$7.40/ea 248 MB CAN

120 PCS 3/8" GR 80 Positive Locking hook with clevis.

$10.85/ea 248 MB CAN

100 PCS 1/2" GR 80 Positive Locking Hook with clevis.

$26.25/ea 248 MB CAN

40 PCS 3/8" GR 80 Positive Locking Hook with fi xed eye.

$13.75/ea 248 MB CAN


50 PCS 1/2" GR 80 Positive Locking Hook with fi xed eye.

$25.50/ea 248 MB CAN

800 PCS 9/32" GR 80 Clevis Cradle Grab Hook $1.65/ea 248 MB CAN

450 PCS 3/8" GR 80 Clevis Cradle Grab Hook. $3.20/ea 248 MB CAN



700 PCS 9/32" GR 80 Clevis Sling Hook With Latch.

$2.95/ea 248 MB CAN

400 PCS 3/8" GR 80 Clevis Sling Hook With Latch. $4.30/ea 248 MB CAN

320 PCS 1/2" GR 80 Clevis Sling Hook With Latch. $9.32/ea 248 MB CAN

4 2" Alum. Choker -Domestic $20.50 420 FL

9 3" Alum. Choker - Domestic $42.00 420 FL

1,000 7/16" ZP Spring Snap Hook 4-1/2" OAL $ .65 each 221 WA

104 5/16 G43 EYE GRAB HOOK $1.05 359 IL

1250 5/16 G43 EYE SLIP HOOK SELF COLORED

$1.02 359 IL

407 5/16 G70 CLEVIS SLIP HOOK $3.75 359 IL

6 3/8" G43 EYE SLIP HOOK, SELF COLORED

$1.30 359 IL

94 5/8" EYE/EYE SWIVEL GALV $3.72 359 IL

24 1/2" G80 Craddle-Less Grab Hook CM $28.00 50 TX

100 9/32" Clevlok G80 Sling Hook no latch CM $10.50 50 TX

50 "CM 5/8"" Gr 80 clevis sling hook new old stock, has a 24"" piece of grade 80/100 chain attached to it. Made in USA.

40.00 ea. 517 AR

25 "5/8"" Crosby clevis sling hook with latch, new old stock made in Belgium

40.00 ea. 517 AR

LinkssiZe QtY. desCriPtiOn PriCe Lister ZOne

2,800 3/8" G80 MECHANICAL COUPLING LINK - INDIVIDUALLY PKG'D - IMPORT

$2.50 32 IN

8 3/4 GALV CONNECTING PEAR SHAPE DOM

$12.00 35 MD

1500 7/16 RAPID (QUICK) LINK $0.60 35 MD

600 3/16 RAPID (QUICK) LINK (FRENCH) $0.50 35 MD

150 1/2 RAPID (QUICK) LINK STAINLESS $6.00 35 MD

7 1/2 quick links, Campbell $2.75 397 NJ

4 5/16 - 3/8 double clevis link, Crosby $12.49 397 NJ

500 1/2 C & M Chain Connecting Links Zinc Plated

$0.95 187 CA

20 1-3/8 PEAR SHAPED, FORGED, CHINESE

$15.00 54 CA

2000 1/8"x3/4" ZP,Lap (Repair) Links $0.04 54 CA

75 Master Cuplink Clevis Connection, 3/4" Acco

$45.00 427 CA

3 650-0102 radius link NO 220 $11.00 100 IL

500 #13 Pad eye A151304 $2.15 102 TX

1,000 3/16 proof coil cold shuts self colored $0.08 35 MD

2,000 3/8 proof coil cold shuts self colored $0.22 35 MD

69 3/4 Proof coil cold shuts self colored $1.00 35 MD

3,400 1/8 ZP Rapid Link Midget $0.15 35 MD

50 1 1/4 connecting link self colored $34.00 35 MD

77 1/2 galv pear shaped connecting link $9.00 35 MD

52 DIXIE 7/16 TWIN CLVS LINK S249 redbook less 48 BC CAN

4,812 3/8 (9MM) WIDE OPENING QUICK LINKS MAX B/S 6,000LBS

$0.50 35 MD

1332 3/8 Galv. end links, Crosby G-340 type; China $0.50 275 OR

45 Crosby G-340 End Link, 7/8" x 5-1/8", gal., NEW Surplus

$15.75 187 CA

97 3/4 Pear Link $2.70 86 KY

29 1" Pear Link $4.58 86 KY

5459 1/8 Quick Link $0.08 86 KY

1700 3/16 Quick Link $0.15 86 KY

376 1/8 x 3/4 Lap Link $0.03 86 KY

2450 1/4 x 1-1/2 Lap Link $0.15 86 KY

287 5/16 x 1-1/2 Lap Link $0.09 86 KY

425 3/8 x 2 Lap Link $0.22 86 KY

1500 3/16 Cold Shut $0.06 86 KY

1693 1/4 Cold Shut $0.09 86 KY

1300 5/16 Cold Shut $0.22 86 KY

1741 3/8 Cold Shut $0.13 86 KY

108 1/2 Cold Shut $0.24 86 KY

3 AT-3 3" Alum. triangle - Domestic $40.00 420 FL


LINKS-MM WIRE ROPE WRE CAtALOG

LinkssiZe QtY. desCriPtiOn PriCe Lister ZOne

43 3/16" GALV QUICK LINKS $0.12 359 IL

165 7/32" X 1-1/4" LAP LINK $0.08 359 IL

8733 5/16" GALV QUICK LINK $0.34 359 IL

352 3/8 GALV QUICK LINK $0.38 359 IL

5 5/8" CARBON PEAR, GALV $1.77 359 IL

10 3/4" CARBON PEAR LINK $4.36 359 IL

10 3/4" CARBON PEAR LINK $4.36 359 IL

12,000 1" WELDED ALLOY PEAR $21.07 359 IL

5 1" WELDED ALLOY OBLONG LINK $29.00 359 IL

LubricantssiZe QtY. desCriPtiOn PriCe Lister ZOne

35 lb pail "Wirelifeª Almasol¨ Coating Grease (453) $215.60 520 TX

5 gal "Wirelifeª Monolec¨ Penetrating Lubricant (2001)

$182.15 520 TX

35 lb pail "Wirelifeª Almasol¨ Coating Lubricant (2002)

$300.65 520 TX

5 gal "Wirelifeª Low Tox¨ Penetrating Lubricant (2011)

$182.75 520 TX

35 lb pail "Wirelifeª Almasol¨ Syn Coating Lubricant 2022

$290.85 520 TX

Complete Kit

The Viper Wire Rope Lubricator. The system consists of the Lubricator Collar assembly which houses the polyurethane seals to suit the specifi c size rope. The assembly is clamped around the rope and anchored to a fi xed point. The rope is then pulled through the collar as the lubricant is applied with a high pressure grease pump, forcing lubricant between the strands to the center or the rope. The complete Viper Kit consists of: Heavy Duty Steel Collar, Hydraulic male coupler, Excess lubricant hose, Aluminum storage case, 4 x “D” shackles, 2 x 2 mt chains. Pair of Seals (see seal selection guide) note part # below. Set of Scrapers (see scraper selection guide) note part # below. 20kg - 50:1 Grease pump, Fol-lower Plate, Drum Cover, 4m 1/4 SWB HP Hose, Female quick release coupling, On/Off ball valve, 1/4” air service unit

$7,000.00 520 TX

Master LinkssiZe QtY. desCriPtiOn PriCe Lister ZOne

4 3" Crosby A 342 Alloy Master Links $1,025.00 187 CA

5 3" dia Crosby A342 New Surplus Master Link

$490.00 95 WA

2 2-1/2" Crosby A-342 Alloy Master LInk $785.00 187 CA

9 2" Crosby A324 Alloy Master Link $250.00 187 CA

9 1-3/4" Crosby S342 Alloy Master Link $175.00 187 CA

3 1-1/2" Crsoby S342 Alloy Master Link $120.00 187 CA

4 1-1/4" Crosby A-342 Alloy Master Link $55.00 187 CA

Call 1/2" - 4", Alloy Master Links, SeaLink, USA, with proof test certs

Call 187 CA

1 2-3/4" Crosby A- 341 Alloy Master Link $930.00 187 CA

550 PCS 1/2" Alloy Master Link $1.85/ea 248 MB CAN

400 PCS 5/8" Alloy Master Links $3.35/ea 248 MB CAN

500 PCS 3/4" Alloy Master Links $4.50/ea 248 MB CAN

300 PCS 7/8" Alloy Master Link $8.45/ea 248 MB CAN

150 PCS 1-1/2" Alloy Master Link $37.70/ea 248 MB CAN

3 2.1/4" G80 Alloy Subassembly for 1" Chain

$575.00 50 TX

Millimeter Wire RopesiZe QtY. desCriPtiOn PriCe Lister ZOne

1,548' 10MM 8X19 IWRC EIP RRL GALV $1.07 32 IN

3,280' 10MM 8X19 IWRC EIP LRL GALV $1.07 32 IN

2,800' 10MM 6X36 IWRC EIP RRL $0.44 32 IN

1,267' 11MM PYTHON LIFT 34X7 COMPACTED NON-ROTATING 1960 GRADE

$1.76 32 IN

1,360' 11MM 6X36 IWRC EIP RRL WIRE ROPE $0.43 32 IN

986' 12MM 6X36 IWRC EIP RRL WIRE ROPE $0.53 32 IN

1,260' 12MM 6X36 IWRC EIP RRL WIRE ROPE $0.53 32 IN

2,297' 13MM 8X25 FC EIP LRL WIRE ROPE $0.89 32 IN

2,117' 16MM PYTHON 18X17 IWRC EIP LRL WIRE ROPE

$1.71 32 IN

357' 18MM PYTHON 6X36 IWRC EIP RRL WIRE ROPE

$0.96 32 IN

471' 18MM 6X36 FC EIP RRL WIRE ROPE $0.68 32 IN

778' 18MM PYTHON MULTI 10X19 COMPACTED - 1960 GRADE

$1.91 32 IN


500' 18MM PYTHON POWER-9R 9X19 PARALLEL STRANDED RRL - 1960 GRADE

$2.06 32 IN

235' 18MM PYTHON POWER-9R 9X19 PAR-ALLEL STRANDED RRL - 1960 GRADE

$2.06 32 IN

617' 20MM 6X36 FC EIP LRL WIRE ROPE $1.08 32 IN

1,740' 20MM PYTHON 18X17 IWRC EIP LRL WIRE ROPE

$2.00 32 IN

571' 23MM PYTHON LIFT 34X7 NON-ROTATING COMPACTED LLL - 1960 GRADE

$3.00 32 IN

864' 26MM PYTHON LIFT 34X7 NON-ROTATING COMPACTED - 1960 GRADE

$4.73 32 IN

1,158' 28MM PYTHON ULTRA 10X19 COMPACTED - 1960 GRADE

$4.43 32 IN

889' 28MM PYTHON ULTRA 10X19 COMPACTED - 1960 GRADE

$4.43 32 IN

264' 34MM PYTHON HOIST 34X7 NON-ROTATING CALIBRATED - 1960 GRADE

$6.74 32 IN


$2.09 32 IN


$2.09 32 IN


$2.09 32 IN


$2.09 32 IN


$2.09 32 IN


$2.09 32 IN

1@5500 ; 1@402 '& 1@

3/4" Python Compac 35 RLL 2160 4.43/ft 420 FL

1@174' & 1 @364& 1@4

5/8-16MM Python Compac 35 RLL 2160 3.28/ft 420 FL

1323' 20MM Python Compac 35 RLL 2160 4.99/ft 420 FL

649' 22 MM Python Compac 35 RLL 2160 5.62/ft 420 FL

724' 26 MM Python Compac 35 RLL 2160 Non Rotating

6.56/ft 420 FL

725 22 mm Casar Turboplast RRL 1960kN wire rope

4.85/ft 108 TN

417 28MM 35 X 7 HIGHT PERFORMANCE ROPE REDAELLI 175-00230

$5.86 294 OH

138 20MM 35 X 7 HIGH PERFORMANCE ROPE 175-00150

$3.86 294 OH

423 15MM PYTHON COMPAC35 R LANG LAY 175-00085

$2.76 294 OH

1425 Import 15MM, 6x36, iwrc, rhrl, eips POR 171 BC

10000 12mm 19x7 IWRC Brt Korean Non-Rotation

$0.35 54 CA

3124 21MM 35 X 7 HIGH PERFORMANCE ROPE LEFT LANG LAY (REDAELLI) refer to this PN 175-00155

$3.66 294 OH

FT 7 MM 8X26 RRL GALV 2160 5.1 TONS BS OVERHEAD HOIST CRANE ROPE

POA 2 LA


POA 2 LA

FT 8 MM 8X26 LRL GALV 2160 7.26 TONS BS OVERHEAD HOIST CRANE ROPE

POA 2 LA

FT 9MM 8X26 RRL GALV 2160 9.2 TONS BS OVERHEAD HOIST CRANE ROPE

POA 2 LA


POA 2 LA


POA 2 LA


POA 2 LA


POA 2 LA


POA 2 LA

FT 12.5 MM 8X26 RRL GALV 2160 18.45 TONS BS OVERHEAD HOIST CRANE ROPE

POA 2 LA


POA 2 LA

FT 28MM X 300 FT 35X7 WIRE ROPE $2.98 2 LA

FT 10MM X 500 FT 6X36 WIRE ROPE $1.08 2 LA

2161 25MM DYFORM 34 LR 2160 GRADE B079794P00 175-195

$5.37 294 OH

1544 28MM DYFORM 34 LR MAX B077954A00 175-225

$7.75 294 OH

960 28MM DYFORM 34 LR MAX B068554Z01 175-225

$6.64 294 OH

741 22MM DYFORM 34 LR 2160 GRADE B060827B00 175-160

$3.23 294 OH


MM WIRE ROPE-MISC.WRE CAtALOG


710 18MM DYFORM 34 LR 2160 GRADE B062834POO 175-110

$2.66 294 OH

680 23MM 35 X 7 HIGH PERFORMANCE ROPE LEFT LANG LAY Redaelli R15863-98-05 175-185

$3.50 294 OH


$6.76 294 OH


$5.55 294 OH

530 22MM DYFORM 34 LR 2160 GRADE B056742A01 175-160

$3.10 294 OH

519 19MM DYFORM 34 LR LEFT LANG LAY GRADE 2160 B052639P00 175-120

$2.64 294 OH

500 22MM DYFORM 34 LR 2160 GRADE B056742A00 175-160

$3.10 294 OH

497 26MM DYFORM 34 LR MAX B085118A00-2 175-220

$5.89 294 OH


$5.48 294 OH


$4.77 294 OH

440 19MM 35x7 Redaelli R15904-99-02-B 175-120

$2.51 294 OH

430 18MM 6 X 37 IWRC RRL EIP 150-410 $1.76 294 OH

425 19MM DYFORM 34 XL R LANG LAY 2160 GRADE B082670B00 175-115

$3.32 294 OH


$2.64 294 OH


$4.77 294 OH

386 26MM DYFORM 34 LR MAX B085118A00-1 175-220

$5.89 294 OH


$3.00 294 OH

287 19MM DYFORM 34 XL R LANG LAY 2160 GRADE B086423A00 175-115

$4.96 294 OH

279 1" 19-STRAND HIGH PERFORMANCE ROPE Redaelli R15960-99-002I 175-200

$3.90 294 OH

267 22MM DYFORM 34 LR 2160 GRADE B071244B00 175-160

$3.23 294 OH

251 19MM DYFORM 34 XL R LANG LAY 2160 GRADE B074273A00 175-115

$3.13 294 OH

126 24MM 6X36 IWRC IPS RRL $1.51 32 IN

447' 26MM PYTHON LIFT 34X7 NON-ROTAT-ING COMPACTED - 1960 GRADE

$4.73 32 IN

MiscellaneoussiZe QtY. desCriPtiOn PriCe Lister ZOne

6 1/2" 6x19 IWRC "IPS" Grade Galv. wire rope slings.Each leg is 10' w/Gunnebo BKL-10-8 safety swivel hooks on each end & a 1" Crosby ring on other. WWL is 10,000 lbs.

395.00/EACH 420 FL

1 WG-11 x 5' Coffi ng 11Ton Roller Chain Hoist - Never used (WG11050001)

$800.00 139 PA

13 1/2T x 20' Hand Chain Hoist - Daeson-Korean (DSN05x20)

$95.00 139 PA

11 3T x 20' Hand Chain Hoist - Daeson-Korean (DSN3x20)

$184.00 139 PA

3 5T Plain Trolley - Daeson-Korean (CX15-9899-K)

$157.00 139 PA

988 PCS 2" Cargo Single "J" Hook B/S 7,700 LBS Gold Chromate.

.50/ea 248 MB CAN

35,000 Plated Eye for 1/8" Wire Rope with 1/4" Pin Hole

.42 each 178 OH

123 C3R Kennametal bits $5.18 420 FL

1 #486000 DELTA 37 GAL VERTICLE TANK $292.76 420 FL

400 Empty wood reels f/wire rope, 24" - 30" dia., steel core

$12.00 369 Ohio

50 3"/SC Screw Pin Chain Shackles/New Surplus

$250.00 95 WA

40 50 ton/American Manual Quick Release Hook

$750.00 95 WA

155 3/8" x 6" / Surplus Galv Eye & Eye Turnbuckles

$1.00 95 WA

70 5 ton/McKissick 8 $125.00 95 WA12 5 ton/McKissick 8 $125.00 95 WA40 4" x 22" / Surplus Round Rings $200.00 95 WA5 100 ton/Galv Safety Anchor Shackles $500.00 95 WA6 120 ton/Galv Safety Anchor Shackles $650.00 95 WA32 17-1/2 ton/Used 1-1/2" Screw Pin Anchor

Shackles$10.00 95 WA

500 #13 Pad Eye T-304 s/s $2.15 102 TX12 3 & 5 ton swival hook headache balls $275.00 427 CA2 150K Stainless TriCoastal 2300 Load

Scales w/ Digital Readout, Certifi ed ASTM E4-99, Used

$2,000.00 187 CA

Manufactured by Hinderrust Inc.A division of Fluoramics Inc.(The makers of “Tufoil®”)

www.hinderrust.com800-922-0075 or 201-825-8110

Fax: 201-825-7035Distributorships are still availableDistributorships are still available

Machines, tools, ropes, drive chains, etc. that are already rusted can be salvaged with Hinderrust. Just saturate the rusted area and the rust won’t spread any further. The lubricants in Hinderrust will renew the life of these items and they’ll run as good as new! Since Hinderrust has no sol-vents, it can be used in closed areas like subways, mines,mines, engine rooms and other close quarters that would otherwise be prohibited.

But there is hope.ThatThat wire rope coated with Hinderrust, looks like this after the same 2 months! This solvent-free, rust-inhibiting lubricant is re-sponsible for stopping the rust dead in its tracks. Its surface active, and low viscosity penetrates every internal nook and cranny.

The “Test of Time” doesn’t take long when RUST is involved. Look at this wire rope after just 2 months in salt water!

STOP IT

MISCELLANEOUS WRE CAtALOG


2 50,000 lbs Dillon Dynomometers, 200 lbs Division, unused, shackles both ends.

$950.00 427 CA

4 NEW 24" Pneumatic Caster, "Saginaw Products" mdl 6423-M

$350.00 427 CA

8 NEW Urethane coated steel caster, 5" x 16" with swivel mount. Very Heavy Duty

$425.00 427 CA

1 1,000,000 lbs load cell, tension or compression, dual bridge.

$6,950.00 427 CA

1 Horizontal Hacksaw, 1 HP, 220/440 V, 18" opening

$1,200.00 427 CA

60 Sling D1Ll-Nx10' 2200 vert 2 ply 1" E&E $7.50 100 IL

50 5# Galv. Danforth Type Anchor $4.75 54 CA

25 8# Galv. Danforth Type Anchor $7.15 54 CA

2 Pendant Lines: 1 3/8 x 85 ft w/Thimble eyes, 2 in. round pin chain shackles, New

$725.00 112 OH

2 Pendant lines: 1 3/8 x 47; 6 3/4 Open & Closed ends, New

$560.00 112 OH

8 Pendant Lines: 1 1/4 x 51 ft, 1 in. open & closed ends, New.

$555.00 112 OH

2 Pendant Lines, 7/8 x 127, 11 3/4 Closed both ends, new

$390.00 112 OH

6 Pendant Lines, 1 3/8 x 139, 10 in. Open & Closed ends, new

$410.00 112 OH

39 3/8 GUNNEBO LATCH KITS #545952 POR 171 BC

10 1/2 GUNNEBO REPAIR KITS FOR BK13-8

POR 171 BC

8 MS #1 die set POR 171 BC

1077 3/4 SKIDDER RINGS POR 171 BC

30,000 3/16" Cold Shut Zinc Plated $0.05 221 WA

32 ST24-3 3/32 stops $0.62 43 IL

27 ST24-4 1/8 stops $0.79 43 IL

32 ST24-5 5/32 Stops $1.38 43 IL

21 ST 24-6 3/16 stops $1.59 43 IL

75 MS20664-3 3/32 ball & shank $0.54 43 IL

55 MS20667-6 3/16 fork $10.49 43 IL

22 MS20667-7 7/32 fork $17.35 43 IL

21 MS20667-10 5/16 fork $41.48 43 IL

10 MS20667-12 3/8 fork $63.12 43 IL

27 MS20667-3 3/32 Fork $4.64 43 IL

28 MS20668-4 1/8 eye $3.06 43 IL

37 MS20668-5 3/32 eye $4.24 43 IL

24 MS20668-7 7/32 eye $10.80 43 IL

21 MS20668-10 5/16 eye $46.07 43 IL

37 MS20668-12 3/8 eye $57.07 43 IL

13 MS20668-2 1/16 eye $2.36 43 IL

5 MS20668-3 3/32 eye $2.44 43 IL

8 MS21259-7 7/32 rh stud $10.14 43 IL

8 MS21259-5 3/32 rh stud $3.27 43 IL

12 MS21259-7 7/32 LH stud $10.14 43 IL

11 MS 21260-4 1/16 rh stud $3.27 43 IL

78 MS1260-3 3/32 rh stud $31,444.00 43 IL

4 ACCO K-16 kuplink for 7/8 alloy chain $160.00 43 IL

12 ACCO K-26 kupler for 1" alloy chain (old style)

$60.00 43 IL

150 ACCO 1/4" SC Connecting link $1.80 43 IL

300 ACCO 5/16 hot galv. connecting link $2.00 43 IL

75 C-L 3/8 S-334 1013441 pear shaped missing link

$4.00 43 IL

6 C-L-L 150 1048164 C-l load binders $95.00 43 IL

6 C-L L-150 1048306 Snubbing load binder $100.00 43 IL

150 Accoloy 5/8 eye foundry hook w/handle $95.00 43 IL

2 Accoloy 1in. eye foundry hook $225.00 43 IL

8 ACCO K-502 Kuplex foundry hook $110.00 43 IL

53 C-L S 643 weldless ring 1013824 $18.00 43 IL

3 ALBA Winch hoist model 32A $375.00 43 IL

4 ALBA Winch hoist model 8A $170.00 43 IL

1 Alba Cazador block stop for 8A $65.00 43 IL

6 Alba Cazador block stop for 16A $132.00 43 IL

7 Alba Cazador block stop for 32A $165.00 43 IL24 #17) Red Flounder Plate (LL) $1,005.00 95 WA300 #0 crosby pad eye $0.80 35 MD10 Acco Vulcan G8 3/4 Swivel Hoist Hook $146.00 225 MD20 L7 Esco Zinc Pour Ferrules $15.00 35 MD15 L8 Esco Zinc Pour ferrules $15.00 35 MD4 J7 Esco Zinc Pour Ferrules $16.00 35 MD70 J8 Esco Zinc Pour Ferrules $16.00 35 MD12 S9 Esco Zinc Pour Ferrules $18.00 35 MD16 S10 Esco Zinc Pour Ferrules $18.00 35 MD17 S11 Esco Zinc Pour Ferrules $18.00 35 MD


25 S12 Esco Zinc Pour Ferrules $18.00 35 MD

1000 1/8-3/16 7X19 SSAC,BLK NYLON COATED $0.21 54 CA

144 4" long handle ratchets $12.75 225 MD

300 #6 HDGalv,Lifting eyes untapped, Chinese

$1.50 54 CA

300 #5 HD Galvanized Lifting Eyes, Untapped, Chinese

$1.00 54 CA


$0.65 54 CA


$0.50 54 CA


$0.35 54 CA


$0.25 54 CA

500 4" x 30' Polyester Truck Straps with Sewn eye one end,15,000#BS

$7.25 54 CA

200 1" x 16' Ratchet Straps,2,500#MBL,Black web w/vinyl hooks each end

$3.75 54 CA

200 1" x 16' Ratchet straps,2,500#MBS, Blue web w/sliding link & wire hooks

$3.15 54 CA

400 2" x 30' Ratchet straps, Yellow w/fl at hooks, 10,000#MBS

$8.50 54 CA

500 4" x 30' Polyester truck straps w/D-ring one end, 15,000#MBS

$8.55 54 CA

1500 4" x 30' Polyester truck straps w/fl at hook one end, 15,000#MBS

$7.50 54 CA

400 4" x 30' Polyester truck straps w/fl at hook one end, 15,000#MBS

$7.50 54 CA

800 4" x 30' Polyester truck straps w/wire hook one end, 15,000#MBS

$7.75 54 CA

500 4" x 30' Polyester truck straps w/wire hook one end, 15,000#MBS

$7.75 54 CA

2 12 Ton, MSS Radio Remote Load Weight Indicator, New

$1,275.00 187 CA

2 5 Ton, MSS Radio Remote Load Weight Indicator, New

$1,075.00 187 CA

1 500,000 Federal Dynamic Radio Remote Load Scale with ScoreBoard Readout New

$7,500.00 187 CA

3 6 BR 220 braided polyester sling $295.00 9 Co

1 TPXC KS 12,500 X 13' TWIN PATH $2,100.00 9 Co

71 3/8"x3" Round Rings $0.25 2 LA

600 ratchet hook side facing for 2 inch ratchet $0.78 225 MD

423,500 .125 x 3-1/8 zinc plated hitch pins clip#202

.10/each 420 FL

1 Little Mule Lineman's Hoist Model 322B $100.00 421 SC

2 Pendant Lines: 1-1/8 x 11' w/Open & Closed Swage Sockets

175.00ea 351 WI

6 Pendant Line: 3/4" x 7' w/Open Swage Socket Ea. End

$50.00 351 WI

255 CHAIN LEVER LOAD BINDERS 5/16"-3/8" SIZE IMPORT CHINA

$8.50 403 CT

28 ratcliff chain falls 1/2 ton, 10' lift domestic

$120.00 9 Co

22 3/8" x 1,000' solid braid nylon rope $99.25 420 FL

EA COLUMBUS MCKINNON 6 TON COM-A-LONG

$723.30 2 LA

EA 1036144 CROSBY OVERHAUL BALL 12 TON EYE HOOK

$1,468.00 2 LA

2 #550980 - DELTA 48" Topside Box $298.05 420 FL

12 Prelube 19 - 5 gal. pail $108.69 420 FL

831 5/16 - 3/8 lever binder - import $13.00 ea 420 FL

646 5/16 - 3/8 Rachet Binder $15.50 ea 420 FL

150 PCS 12 FT Polyester Round Sling Olive Green 40,000 LB Vertical

$66.00/EA 248 MB CAN

170 PCS 16 FT Polyester Round Sling Olive Green 40,000 LB Vertical

$97.50/EA 248 MB CAN

40 PCS 16 FT Polyester Round Sling Orange 54,000 LB Vertical

$139.00/EA 248 MB CAN

100 PCS 20 FT Polyester Round Sling Orange 54,000 LB Vertical

$170.00/EA 248 MB CAN

12 Klein Grip #1628-30 for 7/8 wire rope $250.00 399 MN

7 HOIST RING - 1/2 ACTEK 46010 $67.25 525 CAN

3 HOIST RING, 5/8 ACTEK 46004 $61.14 525 CAN

1 HOIST RING, 3/4 ACTEK 46014 $61.14 525 CAN

4 HOIST RING 3/4" FORGED 56014 ACTEK $124.89 525 CAN

2 HOIST RING 1" -8 ACTEK 56212 $120.10 525 CAN

2 HOIST RING 1-1/4"-7 FORGED ACTEK 46802

$124.89 525 CAN

976 3/32 BALL SHANK SS T316 $0.74 359 IL

591 1/4 STEEL BUTTON NB 8 $0.68 359 IL

82 1/4" SWAGE RING EYE 149-8 $10.89 359 IL

60 MARCH-APRIL 2013 WIRE ROPE EXCHANGELISTER'S INDEX ON PAGE 74.

Rigging Attachments Below Hook Lifters

Caldwell quality. Guaranteed.Learn more about our full line of products and services at caldwellinc.com.Or call our team of experienced engineers and technicians at 800.628.4263to discuss the optimal lifting solution for your application.

• Quality assurance• Safety• Increased productivity

• Decreased maintenance • Peace of mind• Cost savings

THE INDUSTRY'S FIRST ANDONLY 2-YEAR WARRANTY.

A promise of performance.

5055 26th Ave. Rockford, IL 61109 • 800.628.4263 • caldwellinc.com

CW_CW_AD_COMP_091412_Layout 1 9/14/12 3:32 PM Page 1


MISCELLANEOUS-SHACKLES WRE CAtALOG

ShacklessiZe QtY. desCriPtiOn PriCe Lister ZOne

38 1-3/4" 25T Japanese Safety Anchor Shackle, Galv., New

$60.00 187 CA

10 2" 35T Japanese SPC SP Chain Shackle, Galv., New

$85.00 187 CA

20 2-1/2" 55 Ton Safety Anchor Shackle Gal Mfg. Japan

$175.00 187 CA

8 2-3/4" 112T Japanese Alloy Safety Anchor Shackle, Galv., Used

$375.00 187 CA

900 5/8 Stainless Steel Bow Shackles ***NEW***

$5.55 60 RI

1500 1/4 SPA SC NON-RATED CHINESE $0.22 54 CA

10000 7/16" SPA,SC, Non-Rated, Ch., .482"pins $0.25 54 CA

185 1/2" SPA Shackles, Non Rated $0.35 54 CA

3 New Skookum 175-Ton Bolt Type Shackles

$900.00 427 CA

100 2 1/2" safety chain shackles $80.00 426 FL

175 3/8 SS CHAIN SHACKLES POR 171 BC



8 Ianco 7/8 L461 RIGGING SHACKLES POR 171 BC

3 RIGGING SHACKLES 1 POR 171 BC

3 Ianco 1 5/8 L467 RIGGING SHACKLES POR 171 BC

2 1 1/4 12 TON BLUE SEAL TRAWL SHACKLE

POR 171 BC

16,000 1/2" TRAWL SHACKLE - SC $1.00 221 WA

7,500 2" LOOSE PIN CHAIN SHACKLE - SURPLUS

$7.50 221 WA

12,000 3/8" TRAWL SHACKLE - SC $0.75 221 WA

100 7/8" TRAWL SHACKLE - GALV $3.50 221 WA

27 #14) SPAS 2-1/4, 52 ton WLL alloy ulren (LL)

$450.00 95 WA

46 #26) SPAS 1-1/2, 17 Ton WLL Galv. Cooper (LL)

$40.00 95 WA

35 #25) SPAS 1-3/4, 40 Ton WLL alloy Galv. Crosby (LL)

$200.00 95 WA

24 #19) Shackle Swivel, 1-5/8", 25ton WLL Ulven (LL)

$200.00 95 WA

24 #20) Shackle Swivel, 2" 40 Ton WLL Ulven

$500.00 95 WA

48 #18) SPCS 3" 75ton WLL plated Ulren/Skookum (LL)

$500.00 95 WA

10 #15 - SAS 3" 110T WLL Galv. C/L (LL) $650.00 95 WA

575 3/16 GSP Chain reg $0.15 35 MD

4 3 1/2 B&N Anchor 100T $250.00 35 MD

22 CROSBY SHACKLE 3/4 20% off 48 BC CAN

1 CROSBY SHACKLE 3/8" Anchor redbook less 48 BC CAN

1 CROSBY SHACKLE 1-1/2 redbook less 48 BC CAN

1 CROSBY SHACKLE 1-1/2 redbook less 48 BC CAN

3 CROSBY SHACKLE 3/4 redbook less 48 BC CAN

2500 1/2 Screw pin Chain, Non-Rated $0.40 54 CA

17 5/8 SPA WLL 3 1/4 TON (CHICAGO) $4.00 102 TX

1 5/8 SPA WLL 3 1/4 TON (CROSBY) $4.00 102 TX

10 7/8 SPA WLL 8 1/2 TONS (USA) $8.00 102 TX

1 1" SPA WLL 10 TONS (USA) $10.50 102 TX

26 1/2" SPA WLL 2TONS (CHICAGO) $2.25 102 TX

16 1 1/2" SPA WLL 20 TONS (USA) $33.50 102 TX

1 1 3/8" SPA WLL 13 1/2 TONS (CROSBY) $29.00 102 TX

2 1 1/4" SPA WLL 14 TONS (USA) $22.00 102 TX

3 1 1/8" SAS WLL 12 TONS (USA) $22.50 102 TX

3000 3/8" SC Trawl Shackles $0.50 54 CA

100 1/2" TRAWL,LOAD RATED,SQ.HEAD,PIN&BODY SAME

$0.35 54 CA

100 5/8" TRAWL,LOAD RATED,SQ.HEAD,BODY&PIN SAME

$0.75 54 CA

700 5/8" SC,TRAWL,LOAD RATED $0.80 54 CA

100 7/8" TRAWL,HDG,LOAD RATED,SQ.HEAD,BODY&PIN SAME

$2.00 54 CA

200 1" TRAWL,HDG,LOAD RATED,SQ.HEAD,BODY&PIN SAME

$4.00 54 CA

50 5/8" TRAWL,HDG,NON-RATED,SQ.HEAD $0.75 54 CA

100 7/8" TRAWL,HDG,NON-RATED,"D"STYLE,SQ.HEAD

$1.55 54 CA

50 1" TRAWL,HDG,NON-RATED,SQ.HEAD $3.00 54 CA

100 1.1/4" HDG Load Rated, Screw Pin Chain Shackles, Chinese

$10.50 54 CA

200 5/8" Stainless Steel, SPC Shackles $4.85 54 CA


77 7/16 STEEL BUTTON SB/NB-14 1 X $34.03 359 IL

209 7/16 CHOKER FERRULE ES MM7/16P $1.85 359 IL

2 9/16 STEEL BUTTON 1-1/4 X 2-7/1 $1.25 359 IL

7 5/8 STAINLESS STEEL BUTTON $13.51 359 IL

13 7/8 WEDGE FERRULE #L7D-L $15.91 359 IL

522 R 3/16 STEEL SWAGE BUTTON $1.20 359 IL

405 3/8" MANILA 3-STRAND TWISTED $0.04 359 IL

350 1-1/4" NYLON 3-STRAND WHITE TWISTED $1.09 359 IL

105 1-1/2" POLYPRO 3-STRAND YELLO $0.36 359 IL

3 "#2 splicing vise very good condition made in USA have 3 available. Been cleaned and painted.

$1,000.00 517 AR

PresssiZe QtY. desCriPtiOn PriCe Lister ZOne

1 Mark 75 ESCO with 4 sets of dies up to 3/4 cable

call 287 TX

1 ESCO MARK 150, 500 TON SWAGING PRESS. REBUILT AND IN EXCELLENT CONDITION.

CALL 84 WA

2 Fenn Model 3F-2 Die, Rotary Swaging, New $27,500.00 187 CA

1 BH-Torin ( Fenn) Model 14.2 Rotary New with 3/8

38,500 OBO 187 CA

1 500 Ton ESCO with some dies call 287 TX

1 350 ton press up to 1" mounted on stell skid $42,500.00 7 TN

1 Wanted: 150-500 Ton Press (800 Ton Press will trade)

0-100000 330 LA

2 500 ton press--see at our web site $49,600.00 7 TN

1 350 Ton Esco with Dies POR 287 TX

1ea ESCO Mark 75 200 ton Press Serial with Full set of Open Channel and Taper Dies

$23,500.00 187 CA

RopesiZe QtY. desCriPtiOn PriCe Lister ZOne

1 x 600 ft 2-1/2" ULTRA BLUE 2.40/ft 44 IL

123' 6X26 RRL IWRC PFV Domestic #1446MA2641A

$2.78 95 WA

30 #5) 1"x100' 3 strand nylon rope w/ th spl eye on end w/ 1/2"x3' ss W/R eye &eye strap (LL)

$50.00 95 WA

2500 1/4" X 14' 3 STRAND POLY-PRO YELLOW $0.25 54 CA

5 1/2 X 50' SISAL ROPE $3.00 35 MD

3 X 1200' 1/2 " YELLOW POLYPRO $96.00 35 MD

1 X 600' 7/8" YELLOW POLYPRO $120.00 35 MD

4 X 600' 3/4" TAN POLYPRO $150.00 35 MD

1 X 600' 1" TAN POLYPRO $180.00 35 MD

1 X 600' 8 STRAND POLYPRO $7,000.00 35 MD


100 3/16 GSPA CHAIN H.T. $0.30 35 MD

10 1 1/4 GSPA CHAIN $14.00 35 MD

61 5/8 B&N CHAIN ALLOY $3.00 35 MD

70 1" GRPA $8.00 35 MD

25 7/8 B&N ANCHOR ALLOY $6.00 35 MD

50 1 1/4 B&N ANCHOR ALLOY $18.00 35 MD

40 PCS 5/16" SP Anchor Shackle Type 316 SS 1.25/ea 248 MB CAN



1 3 in. bolt type anchor shackle, Crosby $750.00 397 NJ

18 1 3/4 screw pin chain shackle, Crosby $149.99 397 NJ

8 2 in. screw pin chain shackle, Crosby $199.99 397 NJ

196 2 TON 1/2' SCREW PIN ANCHOR SHACKLE IMPORT 4000-14010

$1.38 294 OH

10 3" Bolt Type Chain Shackle, Galvanized, 85ton, FRANCE

425.00/ea 50 TX

1050 5/8 Galv Screw Pin Chain Shackle 1.95/ea 50 TX

24 2.1/2" Screw Pin Anchor Shackle, Galvanized, 55ton, JAPAN

295.00/ea 50 TX

4 3.1/2" Bolt Type Chain Shackle, Galvanized, 120ton, FRANCE

950.00/ea 50 TX

773 1-3/8" Shackle round pin w/cotter pin (Chinese)

10.67/ea 420 FL

4000 3/16 Galv SPA Shackle Import (1018357182)

$0.27 139 PA

165 1-3/8 Galv SPA Shackle Import (1018598182)

$10.40 139 PA

50 1-1/2" Bolt Type Anchor Shackles 17 Ton WLL Japan Galv.

$42.25 187 CA

57 1-3/4" 25T Japanese SPC SP Chain Shackle, Galv., New

$56.00 187 CA

Multi-directional warning light indicates to others that the swager is on.

Smart™ Swager with Swager Guarding™• Point of operation guards allow the operator to swage the full range of wire

rope slings without risk of injury caused by pinch points. The system automatically stops when the operator gets too close, and easily resets.

• PLC records number of swages and operational hours, monitors system levels and provides maintenance alerts.

• Pump and motor are fully enclosed and insulated. The swager operates at a very low noise level of 60-68 dB.

The One Press® Swaging System is the fastest and most reliable method of swaging Flemish eye wire rope slings and assemblies. One Press® single stage dies swage carbon steel One Press® sleeves from 1/4” up to 1-1/2” completely in just one press, significantly reducing exposure to hazards.

Universal Fast™ Swagers v3

Pump is fully inclosed and insulated for exceptionally quiet operation.

Universal Die Pocket accommodates both One Press® and multi press dies.

Phone: (905) 859.3901 Email: [email protected] Website: www.strider-resource.com

New & Innovative Products & Processes for the Lifting, Rigging & Load Securement Industry™

Covered electronic foot pedal allows the operator full manual control of the swaging action.

Die pocket rotates 360˚ for easy access and ergonomic positioning.

Conveniently located pressure valve and oversized gauge for improved visibility and accuracy.

Contact Strider~Resource today to learn more about Safeguarding.

U.S. Patents #5,816,094 & #6,032,338, Canadian Patent #2,172,267, and other International Patents.

RSM Pro ~ Production Roundsling Machinery

• The RSM Pro quickly and efficiently produces a full range of roundslings. • The TCM mechanically prepares seamless covers, saving time and labour.• The RSM can run multiple roundslings at the same time, up to 60 feet long. • The tailstock glides easily into position and pneumatically locks in place. • Remote operation allows the operator to fabricate from a safe distance. • Many other innovative features, benefits, and safeguards.

Safe use guides.

•

Dies bolt quickly and securely into place.

Universal Fast™ Swagers v3In Stock for Immediate Delivery

Pump and motor are fully enclosed and insulated. The swager operates at a very low noise level of 60-68 dB.

To learn more, visit our interactive booth at the AWRF Product & Information Exhibition in Ft. Worth, Texas, April 29th, 2013.


SHACKLES-SLINGS WRE CAtALOG



100 3/4" Stainless Steel SPC Shackle $7.50 54 CA

50 1" Stainless Steel SPC Shackle $16.00 54 CA

250 7/16" Stainless Steel SPC Shackle $2.20 54 CA

37 1-1/2" Crosby G-209 SPA Shackle $78.00 187 CA

62 1-1/4" Crsoby G-209 SPA Shackle $49.50 187 CA

37 1" Crosby G-209 SPA Shackle $25.00 187 CA

12 2" Crosby G209 Screw Pin Anchor Shackle

$206.10 187 CA

25 1-1/8" Crosby G209 SPA Shackle WLL 9-1/2 Ton

$37.00 187 CA

18 1-3/4 G-209 Crosby SPA Anchor Shackle WLL 25 Ton

$145.00 187 CA

4 2-1/2" Crosby G-209 SPA Shackle WLL 55 Ton

$450.00 187 CA

4 1-3/8" Crosby G-209 SPA Shackle WLL 13-1/2 Ton

$68.00 187 CA

8 7/8" Crosby G-209 SPA Shackle WLL 6-1/2 Ton

$18.75 187 CA

20 1-1/2" Crosby G-2130 Bolt Type Anchor Shackle WLL 17 Ton

$112.00 187 CA

14 1-1/4" G-2130 Bolt Type Anchor Shackle WLL 12 Ton

$70.00 187 CA

28 1-1/8 Crosby G-2130 Bolt Type Anchor Shackle WLL 9-1/2 Ton

$49.50 187 CA

16 1-3/4 Crosby G2130 Bolt Type Anchor Shackle WLL 25 Ton

$185.40 187 CA

4 3" Alloy Bolt Type Anchor Shackle, 110 Metric Ton, Forge Le Beon, NEW, European made

$585.00 187 CA

25 1-1/4" CM-Midland WLL 18 Ton Alloy SPA Anchor Shackle Gal

$46.75 187 CA

6 1-1/2" CM-Midland 25 Ton Alloy SPA Shackle Gal

$70.00 187 CA

28 1" Crosby G-2130 Bolt Type Anchor Shackle WLL 8-1/2 Ton

$38.50 187 CA

13 2" Crosby G-2130 BoltType Anchor Shackle WLL 35 Ton

$260.00 187 CA

50 7/8" Crosby G2130 Bolt Type Anchor Shackle WLL 6-1/2 Ton

$32.00 187 CA

100 1" Campbell 999-G Bolt Type Anchor Shackle WLL 8-1/2 Ton

$24.75 187 CA

25 1-3/4" Crosby G-209A SPA Alloy Anchor Shackle, WLL 40, New

$145.00 187 CA

9 1-3/4", CM-Midland, 40 Ton, Alloy Bolt Type Anchor Shackle, Galv.

$135.00 187 CA

6 1-1/2", 20 Ton, CM-Midland, Bolt Type Anchor Shackle, Galv.

$53.50 187 CA

290 1/2 S.C. S.P.Anchor Alloy $1.10 35 MD

300 1/2" SURPLUS S.P. CHAIN GREY GALV. $0.50 35 MD

300 7/8 B & N SURPLUS CHAIN GREY GALV $2.50 35 MD

50 7/8 ROUND PIN CHAIN SHACKLE GALV 6.5T

$2.50 35 MD

1 3" Crosby G2140 Alloy Bolt Type Anchor Shackle WLL 110Ton

$775.00 187 CA

4 Crosby Sling Saver Web Connector- Round Sling Size 1; 6 1/4 ton WLL

$82.86 2 LA

19 2-1/2" SHACKLE SPA HG $107.00 355 NY374 3/4 BTAS Import $2.88 86 KY302 7/8 BTAS Import $4.39 86 KY80 1-1/8 BTAS Import $10.79 86 KY1500 1/8 SPAS Surplus $0.05 86 KY2475 3/16 SPAS Surplus $0.07 86 KY1855 1/4 SPAS Surplus $0.10 86 KY3000 5/16 SPAS Surplus $0.24 86 KY

2010 3/8 SPAS Surplus $0.34 86 KY175 1/2 SPAS Surplus $0.75 86 KY958 5/8 SPAS Surplus $1.21 86 KY560 3/4 SPAS Surplus $2.25 86 KY271 7/8 SPAS Surplus $3.13 86 KY320 "SHACKLE W/SCREW PIN, 5/8IN, $2.51ea 373 OH

500 "SHACKLE ANCHOR,SAFETY BOLT,3/16IN

$0.28 373 OH

2,200 Crosby S-209; 7/8", 6.5 Ton, Painted Screw Pin Anchor Shackles. $18.60 each for smaller quantities. The listed price is for a minimum order of 25 pieces and we are negotiable on larger quantities.

$17.70 187 CA

1 5.1/8" Galv Alloy BTA WLL 300T $1,800.00 50 TX2 5.3/4" Galv Alloy BTA WLL 400T $2,800.00 50 TX6 3" Galv Screw Pin Chain WLL 85T $245.00 50 TX64 1.1/8" Galv BTC WLL 9.5T Japanese $14.00 50 TX3 HOIST RING 1-1/2" FORGED STYLE

56404 IMPORT$124.89 525 CAN


8000/pcs "7/16"" Screw Pin Chain Hdg .78/ea. 102 TX

2400 5/16" Galv Round Pin Anchor $0.45 50 TX

8 3" 85T Bolt Type Anchor - Midland $875.00 50 TX

1925 3/4" SC Lashing SPA Shackle $1.45 50 TX

SheavessiZe QtY. desCriPtiOn PriCe Lister ZOne

9 Crosby 6 3/4 DIA SHEAVE FOR 1/4" ROPE POR 171 BC

1 Gunnebo 32 SHEAVE #680371032 POR 171 BC

Varies Used Sheaves from 12" OD to 60" OD. Good quantities of same sizes. Contact Wire Rope Sales @ 206-762-3700 for Specifi cations & Pricing

Varies 95 WA

500 6" B & L Western Cast Steel Sheave 6" X 1" X 1-1/8" for 1/2" Wire Rope

$24.75 187 CA

SleevessiZe QtY. desCriPtiOn PriCe Lister ZOne

258 5/16 Swage Sleeve S506 Crosby 1.67/ea 420 FL

40 1-3/4" ESCO Stainless Duplex 2PC Duplex Sleeves

$26.35 187 CA

130 1-5/8", ESCO Stainless 2PC Sleeves $18.00 187 CA

48 3/4" ESCO Stainless Flemished Sleeves $4.00 187 CA

160 2" ESCO SS 2pc Sleeves $30.85 187 CA

75 5/8 ESCO S/S 2 pc Sleeves $5.90 275 OR

26 7/8 ESCO S/S 2 pcs Sleeves $8.10 275 OR

88 1-3/8 ESCO S/S 2 pcs. sleeves $18.60 275 OR

168 Copper duplex sleeve 1/8" .20ea. 351 WI

161 3/8" Duplex Sleeves S-506 (Crosby) $2.02 each 420 FL

3200 7/8" Steel sleeves for fl emish eye wire rope slings. Excess inventory Made in USA

$2.26 ea. 178 OH

450 1-1/4" Steel sleeves for fl emish eye wire rope slings. Excess inventory Made in USA

$5.85ea. 178 OH


$8.80ea 178 OH


17.02ea. 178 OH


$61.21ea. 178 OH

1400 1" Steel oval sleeves for wire rope slings. Excess inventory. Made in USA

8.62 ea. 178 OH

1600 3/4" Steel oval sleeves for wire rope slings. Excess inventory. Made in USA

$4.80ea. 178 OH


$1.20 178 OH


$1.20 178 OH

2182 1/32 COPPER SWAGE/DUPLEX $0.02 359 IL

5000 3/64 ALUM BUTTON STOP $0.03 359 IL

193 5/32 COPPER BUTTON STOP $0.19 359 IL

2925 5/16 ALUM BUTTON STOP $0.17 359 IL


285 9/32 SS MS SWG TERMINALS RH $64.55 359 IL


2046 7/16 ALUM. SWAGE SLEEVE/DUP FE $0.58 359 IL

308 1/2 CARBON STEEL DUPLEX $0.82 359 IL


5 1/2 T316 OVAL SLEEVE DOMESTIC $8.06 359 IL

7 3/4 SS SLEEVE ESCO DUPLEX $6.79 359 IL

2 1" ALUM OVAL SLEEVE USA $6.05 359 IL

4 1-1/4 ALUM OVAL SLEEVE USA $9.33 359 IL

SlingssiZe QtY. desCriPtiOn PriCe Lister ZOne

4 Eye & Eye nylon slings 4 ply 10" x 15' - 90,000# bskt - New

$650.00 427 CA

4 Eye & Eye nylon slings 10" 4ply x 20' - 90,000# bskt - New

$750.00 427 CA

4 Eye & Eye nylon sling 4ply 10" x 10' - 90,000# bskt - New

$650.00 427 CA

3 Eye & Eye nylon sling 3ply 8" x10'- 90,000# bkst - New

$450.00 427 CA

2 Eye & Eye nylon sling 8" x 15'- 3ply - 61,400# bskt - New

$450.00 427 CA

3 Eye & Eye nylon sling 6" x 10' 3 ply - 46,000# bskt - New

$300.00 427 CA

2 Eye & Eye nylon sling 6" 3ply x 15' - 46,000# bskt - New

$350.00 427 CA

2 Eye & Eye nylon sling 6" 3ply x 20' - 46,000# bskt - New

$300.00 427 CA

4 Eye & Eye nylon sling 12" x 25' - 106,000# bskt - New

$1,000.00 427 CA

2 EE2-96 x 85 two ply nylon sling $220.00 43 IL

P.O. BOX 2423, ASTON, PA 19014-2423 USATEL: 800-874-3539 • 610-485-8500 • FAX: 610-494-5835

www.slingmax.com

SLINGS TO THE MAX

®

� Check-Fast® overload indicator built intoTwin-Path® slings

� K-Spec® core yarn is the longest lastingcomposite fiber for slings

� Rifled Cover™ technology for consistentlystrong slings

� Repairable at over 40 locations worldwide

Slingmax® Rigging Solutions provides technology andmarketing support to the best companies in the riggingbusiness inside and outside the USA.The Slingmax® family of products includes the Twin-Path®brand in synthetic slings and the CornerMax® brands forcut protection for synthetic slings. Our Gator-sling™ brandsare well-known multi-part wire rope slings.Our technology results in a competitively priced productline that is far ahead of any competition. Our built-insling inspection and safety features are not availableanywhere else. And this technology is backed up by themost extensive testing program in the sling industry. Ourpolicy of continuous improvement is well documented.Here are some important features of our products.

The Power of... SLINGMAX®

30808_SM Ad #111_Layout 1 1/18/13 11:51 AM Page 1


SLINGS-SWIVELS WRE CAtALOG


SlingssiZe QtY. desCriPtiOn PriCe Lister ZOne

640 3/8 X 4 E&E BIWRC FLEMISH $4.80 35 MD

400 3/8 X 6 E&E B.F.C. ALUM TURNBACK $4.90 35 MD

50 1/2 X 6 E&E GIWRC ALUM TURNBACK $7.10 35 MD

50 1/2 X 7 E&E GIWRC ALUM TURNBACK $7.50 35 MD

25 PCS 6 FT Orange Polyester Endless Round Sling 17,000 LB Vertical.

$13.95/ea 248 MB CAN


$16.20/ea 248 MB CAN


$32.00/ea 248 MB CAN


$40.00/ea 248 MB CAN

16 PCS 18 FT Orange Polyester Endless Round Sling 17,000 LB Veryical.

$44.00/ea 248 MB CAN

15 PCS 18 FT Blue Polyester Endless Round Sling 23,000 LB Vertical.

$45.00 248 MB CAN

300 PCS 12 FT Olive Green Polyester Endless Round Sling 40,000 LB Vertical.

$69.00/ea 248 MB CAN


$80.00/ea 248 MB CAN


$106.00/ea 248 MB CAN

20 PCS 12 FT Orange Polyester Endless Round Sling 54,000 LB Vertical

$100.00/ea 248 MB CAN


$125.00/ea 248 MB CAN


$130.00/ea 248 MB CAN


$157.00/ea 248 MB CAN


$88.00/ea 248 MB CAN


$130.00/ea 248 MB CAN


$154.00/ea 248 MB CAN

SocketssiZe QtY. desCriPtiOn PriCe Lister ZOne

1 2 in. open swage socket, ESCO $750.00 397 NJ

4 2 in. closed swage socket, ESCO $450.00 397 NJ

3 7/16 - 1/2 closed spelter socket, import $13.00 397 NJ

8 9/16 - 5/8 closed spelter socket, CROSBY $30.00 397 NJ

6 1 in. closed spelter socket, import $40.00 397 NJ

10 2 1/4 closed spelter socket, Korean $375.00 397 NJ

650 7/16"-1/2" Forged Closed Spelter Socket, Galvanized, KOREA

21.00/ea 50 TX

40 1.5/8" Cast Alloy Closed Spelter Socket, Galvanized, KOREA

175.00/ea 50 TX

12 2.3/4"-2.7/8" Cast Alloy Closed Spelter Socket, Galvanized, KOREA

$635.00 50 TX

275 3/4" Forged Closed Spelter Socket, Galvanized, KOREA

26.00/ea 50 TX

180 7/8" Forged Closed Spelter Socket, Galvanized, KOREA

$38.00 50 TX

80 9/16~5/8" Galv Closed Spelter Socket $24.00 50 TX

14 3/4" Crosby, G-416, Open Spelter Sockets, galv.

$45.00 187 CA

12 2" - 2-1/8" Crosby G-416 Open Spelter Socket, new, galv.

$675.00 187 CA

40 1-1/2 G-416 Crosby Open Spelter Galv. $275.00 187 CA

3 2-1/4" - 2-3/8" Closed Spelter Sockets, Ulven, USA, New, Galv.

$425.00 187 CA

5 1-3/4" US Steel Closed Spelter Socket, Drop Forged, New

$185.00 187 CA

8 2" Closed Spelter Sockets, Crosby G-417 $350.00 187 CA

40 2" - 2-1/8" Crosby S-417 Closed Spelter Socket, new, galv.

$355.00 187 CA

32 2 " USS Tiger Brand Forged Closed Spelter Sockets

$165.00 187 CA

12 2-1/4" - 2-3/8" Open Spelter Sockets, Kulkoni, Korean, New, Galv.

$425.00 187 CA

2 2" Crosby Open Swage Socket S-501 $595.00 187 CA

300 5/8" Galv Closed spelter sockets $8.50 427 CA

12 Crosby surplus 3-1/4 - 3-3/8" Open Spelter Sockets

975.00 each 427 CA

12 Crosby surplus 3-1/4 - 3-3/8" Closed Spelter Socket

$625.00 427 CA

8 New USS 2-1/4" Open Spelter Socket $375.00 427 CA

2 2-1/2" Closed Spelter Socket $475.00 427 CA

2 Crosby surplus 2-1/2 - 2-5/8" Open Spelter Socket

$625.00 427 CA

20ea Mar 3, 0004 POA 187 CA

30ea. 3 POA 187 CA

SocketssiZe QtY. desCriPtiOn PriCe Lister ZOne

14 Johnson WS-8 7/8"-1" Wedge Sockets New $75.00 187 CA

2 Ianco 1 L263 BUNK STAKE SOCKETS POR 171 BC

39 5/16" Open Swage Socket-Crosby (1039049) $18.50 139 PA

489 S0109-0005 Forged Aircraft Eye (S010905132)

$2.50 139 PA

49 1/2 SS Mach Clevis Socket Assembly $15.00 50 TX

67 3/4 Galv Clevis Socket Assembly $5.00 50 TX

47 1" DF Galv Clevis socket Assembly $8.00 50 TX

3 2" OPEN, GALVANIZED KOREAN $375.00 54 CA

Call Open Spelter Sockets, RopeBlock, avail. 1/4" - 5" (6-130 mm), painted & galv., for wire rope & strand

Call 187 CA

Call Closed Spelter Sockets, RopeBlock, avail. 1/4" - 5" (6-130 mm), painted & galv., wire rope & strand

Call 187 CA

Call Short Bow Sockets, RopeBlock, avail. 1-1/4" -4-1/2" (32-115 mm), painted & galv., wire rope & strand

Call 187 CA

Call Open Wedge Sockets, RopeBlock, avail. 5/16" - 3-1/2" (8-89 mm), painted & galv., wire rope & strand

Call 187 CA

Call Fast Connector Sockets, RopeBlock, avail. 7/16" - 1-3/8" (11-35 mm) painted & galv., wire rope & strand

Call 187 CA

Call Closed Wedge Sockets, RopeBlock, avail. 3/4" - 3-1/2" (19-89 mm), painted & galv., wire rope & strand

Call 187 CA

12 Jan 3, 0004 $195.00 187 CA

65 1-1/4"-1-3/8", Crosby, S416, Open Spel-ter Socket, Painted, New Surplus

$150.00 187 CA

75 1-1/4"-1-3/8",S417, Crosby, Closed Spel-ter Socket, Painted, New Surplus

$106.20 187 CA

72 1/2 CLOSED SS CAST SWAGE SOCKETS (ESCO)

$20.29 105 WA

43 1/2 OPEN SS CAST SWAGE SOCKETS (ESCO)

$28.70 105 WA

6 Crosby G-416, 1-1/4" - 1-3/8" Open Spelter Socket, NEW Surplus, Galvanized

$159.20 187 CA

4 2.3/4"~2.7/8" Galv Closed RopeBlock $950.00 50 TX

112 Open swage sockets for 5/16" wire rope. Made in USA

$22.50 Ea. 178 OH

94 Open Swage Sockets for 3/8" Wire Rope. Made in USA

$22.50 178 OH

88 Closed Swage Sockets for 5/16" wire rope. Made in USA

$ 16.03 Ea. 178 OH

96 Closed Swage Sockets for 3/8" Wire Rope. Made in USA

$ 16,03 178 OH

69 5/16 OPEN SWAGE CROSBY $42.37 359 IL

4 5/16 CLOSED SWAGE UW $26.66 359 IL

2 5/16-3/8 OPEN SPELTER $44.49 359 IL

5 7/16-1/2 OPEN SPELTER $82.67 359 IL



2 5/8 OPEN WEDGE $169.37 359 IL


5 1-1/8 OPEN SPELTER $198.83 359 IL

8 1-1/4"-1-3/8" OPEN SPELTER $288.01 359 IL

2 1-3/4 CLOSED SPELTER W/RESIN $344.54 359 IL

5 1.1/2" Modifi ed Open Swage Socket for 1.3/4" W/R

$305.00 50 TX

4 2" Closed Swage Socket $495.00 50 TX

4 3"~3.1/8" Galv Open Spelter Socket RopeBlock

$1,950.00 50 TX

3 1.1/2" Modifi ed Closed Swage for 1.3/4" W/R

$180.00 50 TX

30 1/2" SS T316 Open Spelter Socket $110.00 50 TX

SwivelssiZe QtY. desCriPtiOn PriCe Lister ZOne

300 1/4 JAW & EYE $0.80 35 MD

1 Crosby 15 Ton Jaw & Eye Swivel, Used but "like new"

$550.00 187 CA

20 1 1/2 EYE & EYE SWIVEL $75.00 35 MD

1 8.5T Miller EE Swivel, Type 11, Socket & Clevis, New

$395.00 187 CA

8 5T Electroline O-Gold Swivel, New $175.00 187 CA

1 1.5T Miller B-1 Swivel, New $145.00 187 CA

1 10 Ton, Miller, Model G Type 115, Jaw/Hook, New

$600.00 187 CA

4 Crosby 5/16 G402 REGULAR SWIVEL POR 171 BC

1200 5/16 E&E galv $0.50 35 MD

40 1/2 STAINLESS STEEL JAW&EYE T316 $6.75 54 CA

250 3/8 Jaw&Jaw Stainless Steel swivel T316 $4.50 54 CA

Open and Closed SwageSockets

in the USA

Material: Forged from special C-1035 steel, fine grain, Special bar quality.

Finish: Spheroidized annealed for cold swaging.

Proudly Made

ClevelandCityForge.com

1.800.431.4350

The Industrial Standard for Structural Hardware Since 1864


SWIVELS-TURNBUCKLESWRE CAtALOG


SwivelssiZe QtY. desCriPtiOn PriCe Lister ZOne

300 3/8" Jaw&Eye, Stainless Steel, Swivels T316

$3.70 54 CA

300 3/8" Eye&Eye Stainless Steel T316 Swivels

$2.25 54 CA

300 5/16" Jaw&Eye Stainless Steel T316 Swivels

$2.20 54 CA

300 5/16" Eye&Eye Stainless Steel T316 swivels

$1.88 54 CA

300 1/4" Jaw&Eye Stainless Steel T316 Swivels

$1.50 54 CA

100 ESMET 5/16 socket & hook swivel roller bearing type weighted; 11 lbs

$71.50 230 TN

3 8.5 Ton Crosby S-2 Jaw/Jaw Swivel as new condition

225.00 each 77 BC CAN

100 1/2 Galv. E/E Swivel, China $40,568.00 275 OR

75 3/8 Galv E/E Swivel, China $1.00 275 OR

15 1" JAW & EYE FORGED $15.00 35 MD

1000 A-2 Miller Swivels $75/each 287 TX

ThimblessiZe QtY. desCriPtiOn PriCe Lister ZOne

16,400 5/16" Standard Thimble ZP 1,500/ bag (1037318182)

$0.05 139 PA

10,350 1/2" Standard Thimble ZP 500/Bag (1037354182)

$0.10 139 PA

60 5/8 REG S.S $3.00 35 MD

49 6C 3/8" -7/16" Newco crescent thimble 8.50/ea 44 IL

8 24C 1-5/8" crescent thimbles 50.00/ea 44 IL

35 17"-18" Synthetic Rope Thimble, 5.1/2"-6" dia. rope

365.00/ea 50 TX

90 8" CIR BRONZE SYNTHETIC ROPE THIMBLE

$140.00 221 WA

500 1/2 SS an thimble $0.90 35 MD

17,000 1/16 ZP an thimble grey $0.03 35 MD

3,000 5/32 ZP an thimble $0.10 35 MD

1,300 3/8 ZP an thimble $0.25 35 MD

200 1/2 ZP an thimble $0.75 35 MD

200 1/2 G round type $0.50 35 MD

10 1 1/8 closed boom $20.00 35 MD

14 1 in closed boom $10.00 35 MD

17 5/8 slip on thimble $5.00 35 MD

40 1/2 equalizing thimble $4.00 35 MD

2 1 3/4 - 1 7/8 crescent thimble $40.00 35 MD

5800 THIMBLE GALV 1/4" $0.20 48 BC CAN

20 THIMBLE HD GALV 1-7/8"-2" $29.50 48 BC CAN

600 THIMBLE HD GALV 1-3/8" $6.25 48 BC CAN

550 THIMBLE GALV 1-1/8"/1-1/4" $2.00 48 BC CAN

200 Crosby Slip Thru thimble S410 1/4" 8 part size

$24.00 230 TN

1350 3/4" Standard Thimble ZP 200/Bag (1037390182)

$0.36 139 PA

100 1.1/4" Galv, Standard Thimbles, Korean $2.50 54 CA

96 Sea-Link Hawser Thimbles for 1" - 1-1/8" Wire Rope. Special Size = Special Price. Wt. 9.5 lbs. ea.

$35.25 187 CA

6 LB303 8" Thimble-2 5/8" Diameter Rope $40.00 2 LA

2 20C CRESENT THIMBLE $35.00 9 Co

12 PR NEWCO SADDLES 5 B 25.00/PR 9 Co

2 #83 CASING THIMBLES $12.00 9 Co

2 #84 CASING THIMBLES $15.00 9 Co

6 W8 SLIP-THRU NEWCO THIMBLE (5256W80041)

$76.00 139 PA

TurnbucklessiZe QtY. desCriPtiOn PriCe Lister ZOne

100 5/16 X 4 1/2 S.C. STUB END $1.00 35 MD

10 3 X 6 S.C. STUB END $125.00 35 MD

150 PCS 3/8 X 6" J X J Type 304 SS Forged Turnbuckle

5.85/ea 248 MB CAN

250 PCS 1/2" X 9" J X J Type 304 SS Forged Turnbuckle.

13.95/ea 248 MB CAN

100 PCS 5/8" X 9" J X J Type 304 SS Forged Turnbuckle.

21.50/ea 248 MB CAN

100 PCS 3/4" X 12" J X J Type 304 SS Forged Turnbuckles.

39.75/ea 248 MB CAN

140 PCS 3/8" X 6" E X E Type 304 SS Forged Turnbuckle.

5.65/ea 248 MB CAN

360 PCS 1/2" X 9" E X E Type 304 SS Forged Turnbuckle

12.50/ea 248 MB CAN



20.25/ea 248 MB CAN


37.00/ea 248 MB CAN

4000 Trimax 1" x 24" Eye-Eye w/ locknuts, NEW surplus, USA made, certs, zinc plated, Quantity Discounts Available

$58.75 187 CA

166 Crosby HG-226, 1" x 24" Eye-Eye Turn-buckles w/ Locknuts, NEW surplus, Galv.,

$94.75 187 CA

4 Crosby 2-1/2" Jaw-Eye Ratchet Type, Galv., NEW Surplus

$575.00 187 CA

4 Crosby 2" Jaw-Eye Ratchet Type, Galv., NEW Surplus

$400.00 187 CA

300 1-1/4 x 24 EE, new surplus $10.00 427 CA

30 1-1/4 x 18 " Campbell BTC Jaw & Eye Galv.

$135.00 187 CA

20 1-3/4 " x 24" Eye & Eye Korean Turn-buckles New

$150.00 187 CA

25 1-1/2" X 18" BTC Jaw & Jaw w/Locknuts, New

$185.00 187 CA

40 1-1/4" X 18" Jaw & Jaw Turnbuckles, Galv., Korean

$95.00 187 CA

200 1" x 18" Eye & Eye Gal BTC-USA- Camp-bell Turnbuckles

$44.75 187 CA

500 3/4" X 12" BTC Jaw & Jaw, New S.C. $10.50 187 CA

30 7/8" X 12" Jaw & Jaw w/locknuts, new, BTC, Campbell, Galv.

$60.75 187 CA

150 1-1/4 x 18" BTC-Campbell Jaw & Eye Turnbuckle Gal

$135.00 187 CA

300 1-1/4" X 18" Jaw & Jaw Turnbuckles with Locknuts Mgf.Campell Chain New US Gov

$128.50 187 CA

2000 1" x24 E&E galv TB, Crosby $25.00 426 FL

12 3/4" x 12" Campbell BTC Jaw & Jaw Turnbuckles w/ Locknuts, New

$48.75 187 CA

394 19-316 Johnson Jaw & Swage SS Turnbuckle for 3/16 (19316TT2010)

$3.50 139 PA

500 5/8 X 12 Eye & Eye $5.00 221 WA

33 1 x 18 SC J&J lashing w/welded jaws $5.00 35 MD

8 1 x 24 Galv E&E surplus $15.00 35 MD

130 5/8 x 18 galv body only $4.50 35 MD

70 3/4 x 18 galv body only $3.00 35 MD

2,000 7/8 x 6 self colored body only $4.50 35 MD

60 1 x 18 galv body only $6.00 35 MD

5 1 3/4 x 24 galv body only $65.00 35 MD

135 1 x 24 self colored stub end $10.00 35 MD

30 1 3/4 x 6 self colored stub end $29.00 35 MD



1 CROSBY TURNBUCKLE 1/2 X 6 E&E redbook less 48 BC CAN

1 CROSBY TURNBUCKLE 1/2 X 6 H&H redbook less 48 BC CAN

10 CROSBY TURNBUCKLE 1/4 X 4 J&E redbook less 48 BC CAN

1 CROSBY TURNBUCKLE 1 X 12 H&E redbook less 48 BC CAN

4 ROSBY TURNBUCKLE 3/8 X 6 H&E redbook less 48 BC CAN

1 CROSBY TURNBUCKLE 7/8 X 12 H&E redbook less 48 BC CAN

1 CROSBY TURNBUCKLE 1 X 24 J&E redbook less 48 BC CAN

1 CROSBY TURNBUCKLE 3/4 X 9 H&E redbook less 48 BC CAN

2 7/8" X 12" JAW & EYE GALV TURNBUCK-LE-CROSBY(1032135011)

$45.00 139 PA

300 3/8"X5" eye & eye turnbuckle aluminum body, zp ends

$0.95 230 TN

300 3/8"X5" hook & eye turnbuckle aluminum body, zp ends

$0.95 230 TN

200 1/2" x 6" eye & eye turnbuckle aluminum body, zp ends

$1.65 230 TN

500 1/2" x 6" hook & hook turnbuckle aluminum body, zp ends

$1.60 230 TN

200 1/2" x 6" hook & eye turnbuckle aluminum body, zp ends

$1.65 230 TN

18 1-1/2" x 24" Eye and Eye Turnbuckle $64.50 86 KY

113 3/4" x 6" Hook and Hook Turnbuckle $3.87 86 KY

117 3.4" x 6" Hook and Eye Turnbuckle $3.87 86 KY

104 3/4" x 9" Hook and Eye Turnbuckle $3.97 86 KY

28 Jan 1, 0002 $57.97 86 KY

3,500 10-24 Hook & Eye midget turnbuckle $0.18 35 MD


TURNBUCKLES WRE CAtALOG


1000 10MM ZP,EYE&EYE TB'S, CAST $0.40 54 CA

300 7/8" x 6" Jaw & Jaw Gal Turnbuckles Korean New

$19.75 187 CA

150 1-1/2" x 24" Jaw & Jaw Turnbuckles with Locknuts "New Import"

$91.50 187 CA

70 1-1/4" x 24" Jaw & Jaw Turnbuckles with Locknuts Imports

$58.75 187 CA

180 1-1/4" x 18" Jaw & Jaw Turnbuckles with Locknuts Gal Import

$55.50 187 CA

50 1-1/2" x 18" Jaw & Jaw Turnbuckles Gal Korean New US Gov

$98.75 187 CA

100 1-1/4" x 18", Jaw & Jaw Turnbuckles, Galv, Korean, New US Govt.

$62.75 187 CA

80 1-1/4" x 12" Jaw & Jaw Turnbuckles, Galv, Korean, New US Govt

$52.50 187 CA

20 1-1/4"x 12" Jaw & Jaw Turnbuckle with Locknuts Campbell-BTC

$122.50 187 CA

125 1-1/4 x 18 " Crosby G227 Jaw & Eye Turnbuckle Gal

$135.00 187 CA

100 1/4 x 4 SC stub end TB, China $0.75 275 OR

100 5/16 4.5 SC stub end TB, China $0.90 275 OR

1 1" x 18" E & J turnbuckle galv. $20.00 351 WI

913 1" X 12" HG-227 JAW & EYE GALV. TURNBUCKLE IMPORT CHINA

$12.00 403 CT

49 1-1/4" x 24" TURNBUCKLE JAW & JAW HG

$51.50 355 NY

21 1-1/4" x 24" TURNBUCKLE EYE & EYE HG

$59.50 355 NY

9 1-1/4" x 18" TURNBUCKLE JAW & JAW HG

$33.50 355 NY

150 1" x 24" E/E DOMESTIC TURNBUCKLE $60.00 9 Co

73 1/2" x 12" J & E HDG Turnbuckle-Import (1031975182)

$3.15 139 PA

6 3-1/4" Jaw & Jaw with variable length Turnbuckles, New govt. surplus, rod length is 31", can extend up to 86" fr. center of pins

$1,250.00 187 CA


200 1/4 x 4 Eye and Eye $0.97 86 KY

16 5/8 x 9 eye ane eye $3.30 86 KY

130 3/4 x 12 eye and eye $8.61 86 KY

89 3/4 x 18 eye and eye $10.51 86 KY

67 7/8 x 12 eye and eye $13.14 86 KY

29 1 x 12 eye and eye $18.64 86 KY

10 1 x 24 eye and eye $26.88 86 KY

74 1-1/4 x 18 eye and eye $28.40 86 KY

18 1-1/2 x 24 eye and eye $64.22 86 KY

224 5/16 x 4-1/2 hook and hook $0.60 86 KY

81 1/2 x 6 hook and hook $2.52 86 KY

27 5/8 x 6 hook and hook $2.96 86 KY

60 5/8 x 18 hook and hook $9.00 86 KY

113 3/4 x 6 hook and hook $3.68 86 KY

328 3/4 x 12 hook and hook $7.65 86 KY

206 1 x 12 hook and hook $18.34 86 KY

11 1 x 24 hook and hook $26.82 86 KY

31 1/2 x 9 hook and eye $1.62 86 KY

35 5/8 x 9 hook and eye $2.92 86 KY

10 5/8 x 12 hook and eye $3.08 86 KY

117 3/4 x 6 hook and eye $3.10 86 KY

104 3/4 x 9 hook and eye $3.57 86 KY

104 3/4 x 12 hook and eye $7.97 86 KY

28 1-1/2 x 24 hook and eye $55.65 86 KY

34 5/16" x 4-1/2" Jaw and Jaw turnbuckle $1.68 86 KY

20 5/8" x 9" Jaw and Jaw Turnbuckle $3.33 86 KY




38 1" x 12" Jaw and Jaw Turnbuckle $14.18 86 KY

83 1-1/4" x 18" Jaw and Jaw Turnbuckle $35.94 86 KY

6 2-3/4 X 24 E&E FORGED $250.00 35 MD

216 "TBKL 7/8 X 6 JAW/JAW GALV $8.00ea 373 OH

43 TBKL 1/2 X 6 EYE/EYE OVAL GALV IMPORT

$1.71 ea 373 OH

359 "TBKL 5/8 X 6 EYE/EYE OVAL GALV $2.76EA 373 OH

179 "TBKL 7/8 X 12 EYE/EYE OVAL GALV $8.65 373 OH

381 "TBKL 1 X 6 EYE/EYE OVAL GALV $9.16 EA 373 OH

97 "TBKL 1 1/4 X 6 EYE/EYE GALV $17.51EA 373 OH

580 "TBKL 5/8 X 6 OVAL EYE/HOOK GALV $2.85ea 373 OH

195 "TBKL 3/4 X 6 OVAL EYE/HOOK GALV $3.87 373 OH

300 "TBKL 7/8 X 6 OVAL EYE/HOOK GALV $6.83EA 373 OH

200 "TBKL 7/8 X 12 OVAL EYE/HOOK GALV $8.65ea 373 OH

600 "TBKL 1 X 6 OVAL EYE/HOOK GALV $9.00ea 373 OH

140 "TBKL 1 X 12 OVAL EYE/HOOK GALV $11.38ea 373 OH

100 "TBKL 1 1/4 X 6 HOOK/EYE GALV $17.50 373 OH

280 "TBKL 7/8 X 6 JAW/EYE GALV $7.10 373 OH

350 1/2" x 9" Galv TB Body Korea/China $1.75 ea 50 TX

44 1.1/4" x 24" Galv TB Body Korean $32.00 50 TX

13 1" x 18" SC TB Body Korean $10.00 50 TX

16 1.3/4" x 18" Galv TB Body Korean $48.00 50 TX

50 2" x 6" SC TB Body Korean $36.00 50 TX

300 5/16" x 4.1/2" SS T316 Jaw & Jaw Forged $9.50 50 TX

102 5/16" X 4.1/2" SS T316 TB BODY FORGED $5.75 50 TX

940 3/8" x 10-1/4 Alum Eye & Eye Turnbuckle $2.20 420 FL

600 "1X18 Jaw & Eye Turnbuckles w/lock nuts $17.50 54 CA

1733 1/4"X4" HOOK/EYE DF $1.50 359 IL

58 1/2" X 6" HOOK/EYE DF $5.32 359 IL

77 "5/8"" X 9 JAW/JAW DF $6.59 359 IL

446 3/4" X 9" HOOK/HOOK DF $6.55 359 IL

50 3/4" X 18" HOOK/HOOK DF $8.46 359 IL

500 3/4" x 18 JAW/JAW LASHING T-B $17.83 359 IL

452 7/8" X 12" HOOK/HOOK DF $14.27 359 IL

53 7/8" X 12" JAW/EYE DF $14.84 359 IL

80 2.1/2" x 6" SC TB Body $75.00 50 TX

50 3/4" x 6" SS T316 Eye & Eye TB Korean $65.00 50 TX

90 1.5/8" x 6" SC TB Body $18.60 50 TX

140 5/8" x 9" Hook & Eye TB Korean $5.75 50 TX

1600 5/16" x 4.1/2" Hook & Hook TB Taiwan $1.10 50 TX

285 5/8" x 9" Eye & Eye TB Korean $5.75 50 TX

80 1" x 12" Jaw & Eye TB w/locknuts Korean $39.50 50 TX

100 50 tons HOOK / LOCK JAW TURNBUCK-LE HOT DIP GALVANIZED

$50.00 541 FL


SPREADER BAR KITS

PIPEENDCAP

Your pipe

CONNECTIVEPIPE SLEEVE Aligned through-holes

to pin pipe. Pins andsafety chains not shown

AC25C "PIPE CAPS" andAG08A00 "PIPE SLEEVES"

Fast Delivery from StockOur large stocking inventory includes a wide range of capacities, which means quick shipment to your site. We can expedite shipment from our North Carolina, USA manufacturing facilities.

Tandemloc kits allow you to build spreader bars with capacities ranging from 28,000 lbs to over 3 million lbs!

Slip and pin them together fast. Better than modular designs that use fixed length bolted together sections. Easy-to-use pins replace easy-to-lose bolts and nuts.

Create the Exact Length You Want —

Reuse pipes for other lengths by cutting shorter or splice them together using Tandemloc “Sleeves”

Buy your pipe locally or buy it from us and we’ll paint it and label it for you. We can test the assembly too, upon request. (If you purchase pipe locally, be sure to follow our standards to avoid failure of spreader!)

We stock virtually every size End Cap we make, even the size for that 3 million pound lift!

Tremendous Capacity Range —

Save Freight Costs or Add Value —

Huge Inventory on Hand —

Efficient and Economical —

INC

FIX

ED

LE

NG

TH

SP

RE

AD

ER

BA

RS

• T

ELE

SC

OP

IC S

PR

EA

DE

R B

AR

S •

FO

RK

LIF

T S

PR

EA

DE

RS

• S

PR

EA

DE

R F

RA

ME

S •

SP

RE

AD

ER

BA

R K

ITS

As specified by Tandemloc

TW

IST

LO

CK

S •

CO

NT

AIN

ER

LIF

TIN

G E

QU

IPM

EN

T •

CO

NT

AIN

ER

TO

W B

AR

S •

LO

AD

LE

VE

LIN

G L

IFT

SLIN

GS

• A

DJU

ST

AB

LE

LIF

T B

EA

MS LIFTING · SECURING · MOBILIZING

Tel: (252) 447-7155 • [email protected], Inc · 824 Highway 101 · Havelock, NC 28532 USA

Call Toll-Free: 1-855-211-2524Manufacturing in the USA

EVERY ITEM PROOF TESTED

www.TANDEMLOC.com

Visit our website!

U.S. Patent #7,967,352


WINCHES WRE CAtALOG


WinchessiZe QtY. desCriPtiOn PriCe Lister ZOne

102 SLIDING WINCH TRACK X 6' SECTIONS-NEW (7514000000)

$30.00 139 PA

5 Ingersoll Rand Air Winch, 2500 Lbs, rebuilt, Model HU

$5,000.00 427 CA

3 Ingersoll Rand Air Tugger, 14,000 LBS line pull, model 12UWB

$14,500.00 427 CA

1 Ingersoll Rand Air, 1000 LBS, model BU, manual controls

$4,250.00 427 CA

WinchessiZe QtY. desCriPtiOn PriCe Lister ZOne

5 ratcliff chain falls 1/2 ton 20' lift domestic $160.00 9 Co

26 ratcliff 1 1/2 ton chainfall 10' lift domestic $195.00 9 Co

4 ratcliff 2 ton chainfall 20' lift domestic $275.00 9 Co

1 ratcliff 5 ton chainfall 10' lift $450.00 9 Co

1 ratcliff 10 ton chainfall 15' lift domestic $755.00 9 Co

COMPAnY: US Cargo Control COntACt inFO: JJ Floss | 866-444-9990 | [email protected]: www.uscargocontrol.com Lister nUMBer: 534

COMPAnY: Action Tie Down MMACOntACt inFO: Michael Dean | 305.238.2375 | [email protected]: www.actiontiedown-mma-cent.com Lister nUMBer: 541

COMPAnY: Rig Rite US, Inc. COntACt inFO: Mark Payton | 870-935-5438 | [email protected]: www.rigrite.us Lister nUMBer: 517

HOISTS • RIGGING HARDWARE • SLINGS

www.allmaterialhandling.com 877-LIFT AMH

You Bring The Load...We Ship The Same Day!

For info: [email protected]

For info: [email protected]

Wide Body & Safety Shackles,Eye Hooks, Master Links

Now Available in North America!

Exclusive Distributors:

Special rates available at the beautiful

El Tropicano Hotel110 Lexington AvenueSan Antonio, TX 78205

1.877.214.9768www.eltropicanohotel.com

$109.00/Single | $109.00/Double

Registration Information:

800.690.3921acrp.net

Dedicated to Improving Crane and Rigging Activities

Speakers include:

Agenda:•Golf Tournament & Softball Game•Keynote Address: Harry Costner, PE,

Mammoet

Wednesday, May 8thBreakfast•Crane & Rigging Jeopardy: Crosby•Case Studies of Super Critical Lifts:

Harry Costner, PE, Mammoet •Wind Turbine Lifting Considerations:

Donald Strong, PE, Vestas •Offshore Rigging:

George Watson, Holloway Houston Lunch•Breakout Workshop: Wire Rope Splicing•Breakout Workshop: Chain Sling

Mechanical Assembly & Inspection•Breakout Workshop: Wire Rope Inspection•Breakout Workshop: Crane Simulator Rodeo

– Mobile, Tower, Overhead Cranes

Thursday, May 9thBreakfast•Critical Lift Planning Interactive Workshop:

Mike Parnell, Industrial Training International•What is a Rigging Engineer’s Function:

FLUORLunch•Breakout Workshop: Mobile Crane

Inspection•Breakout Workshop: Crane Pads-

DICA FIT System Training•Breakout Workshop: SMPT Transporters•Crane Operator Rodeo Results

Friday, May 10thBreakfast•Heavy Intermodal Lift & Transport-

Engineering Considerations: Jim Yates, Barnhart Crane & Rigging

•Oil & Gas Lifting Challenges: Don Jordan, BP

Come Learn at theAssociation of Crane

& Rigging ProfessionalsGeneral Assembly

May 7-10, 2013

Press Partners include:


[Lister index]id# COMPAnY PHOne #

2 American Rigging & Supply 225-344-7144

7 CUMBERLAND SALES CO. 800 643 5189

9 D & M Wire Rope / DR&T 970 242 1144

29 Hanes Supply Inc. 716-826-2636

32 Hessville Cable & Sling Co. 219-944-7200

35 Indusco 410-727-0665

43 John Sakach St. Louis 618-451-2907

44 John Sakash Company 630-833-3940

48 Keystone Supply Co. 604-273-4557

50 Kulkoni, Inc 713-691-1234

54 Landmann Wire 800-331-0794

60 M AND G INDUSTRIES 401-253-0096

63 Manchester Sling Co. 800.392.5510

67 Marine Rigging 251-432-1212

70 Matex Wire Rope Co. 903-984-9691

77 Nor-Van Cable & Marine 604-574-5221

84 Pacific Industrial Supply 206-682-2100

86 Paducah Rigging, Inc. 270-443-3863

95 Rasmussen Wire Rope 206-762-3700

100 Rockford Rigging Inc. 815-877-0007

102 Samco Sales, Inc 713-733-5700

105 Woods Logging 360-577-8030

108 Yarbrough Cable 800-395-5438

112 Wilkof Steel & Supply 330-455-4581

113 Innovative Assembly Design 866.772.9952

121 Southern Wire 877-310-4683

124 Industrial Rope Supply 513-941-2443

139 ALP Industries 610-384-1300

144 Halo Wire Rope 866-530-4256

156 NORTHERN STRANDS CO. LTD. 306-242-7073

171 Unalloy-Surrey Wire Rope 604-534-5611

173 Westech Rigging 503-399-7037

178 Assembly Specialty Pro 216-676-5600

187 Associated Wire Rope and Rigging, Inc. 310.448.5444

217 Bairstow Lifting Products 800-241-8990

221 Washington Chain and Supply 206-623-8500

225 B/A Products Co. 410-381-1700

230 Volunteer Wire Rope 865-546-8613

244 VanBeest 713-674-5753

245 Bilco Wire Rope & Supply 908-351-7800

248 MacMor Industries ltd. 204-786-0203

272 Mid America Industries 618-274-6528

id# COMPAnY PHOne #

274 WORLDWIDE ENTERPRISES, INC. 401-434-3900

275 Cascade Rigging 503-722-7500

276 MURPHY INDUSTRIES, INC. 740-387-7890

278 Dominion Steel Specialties 713-678-8141

279 Western Sling & Supply 303-688-0978

281 Tri-State Wire Rope 513-871-8656

287 H. T. Sullivan Surplus 713-641-1552

294 Mazzella Lifting Technologies 440 -239 -7000

298 Will Ryer & Son 925-779-9473

303 PREMIER WIRE ROPE 713- 979-5300

306 Hercules SLR Inc. 902-468-0300

314 Caldwell Group 815-229-5667 ext. 231

330 HALO LLC 985-396-2298

336 All Material Handling 312-698-8658

351 U.S. Sling and Supply (920) 722-0373

355 Peak Trading Corp 845-338-1325

359 Alps Wire Rope Corporation 630-893-3888

362 APComPower 913-894-1374

365 Victory Ground Support Equipment 323-581-7272

366 Cableco Rigging 562-942-8076

369 Lake Erie Rubber Recycling 440-570-6027

373 Cleveland City Forge 800-431-4350

381 LAMS Export 619-674-1350

390 Baydar & Associates 902-445-2535

397 Brown & Perkins, Inc. 609-655-1150

399 Sharrow Lifting Products 651-489-1341

403 Cableworks Inc. 860-928-0475

420 Certified Slings 800-831-7880

421 Charleston's Rigging 843-723-7145

426 Consolidated Rigging 904-765-7177

427 The Coordinated Companies 310.834.8535 x203

450 Certified Mining & Construction Sales & Rental

306-384-8593

460 Special Steel Wire Rope [email protected]

517 Rig Rite US 870-935-5438

518 DCL Mooring and Rigging 504-944-3366

520 Lubrication Engineers, Inc 800-537-7683

525 SLING-CHOKER MFG. (HAMILTON) LTD

(905)545-5025

526 Koch Industries, Inc. 763-475-6500

534 US Cargo Control 866-444-9990

541 Action Tie Down, MMA 305.238.2375

Holloway Houston, Inc5833 Armour Dr.

Houston • TX 77020Phone: 713-674-5631

Primary Fax: 713-674-8352International Sales Fax:

[email protected]

www.hhilifting.com

GET THE APP

WATERMARKSThe highs and lows of shipping on the Mississippi RiverBY JOE NOLAN

In the last several years, the water levels on the Mississippi have ranged from dangerous � ooding to almost unnavigable lows during a drought that has been characterized as the worst in three decades. More disturbing than either of these extremes is the fact that the Mississippi is becoming increasingly unpredictable overall, and an already beat-up shipping industry that sinks or swims on the river’s channels is facing an uncertain year.

“Use of the river has dropped o� and that’s not something that comes back right away.”- Gordon Miller, Co-Owner,

Robert B. Miller and Associates


At the end of 2012, Mid-Missouri Public Radio Station KBIA reported that drought conditions were causing another drop in the Mississippi River’s water level and that river commerce could be ground down to a halt as early as mid-January. In addition to the drought, ice on the northern section of the river was also being blamed for reducing � ow more drastically than had been predicted.

KBIA reported that the Coast Guard was con� dent that though the nation’s largest waterway was facing the worst drought in decades, it would remain open. However, industry groups were not as con� dent

about the river sustaining business as usual. Barges on the waterway had been carrying smaller loads at slower speeds for months, and Deborah Colbert of the Waterways Council claimed that further load limits would make shipping nonviable by mid-January.

“� e impacts have already been felt; export orders plummeting, other orders are being curtailed or cancelled altogether, companies are considering layo� s,” she said. “And so again, January 15th is D-Day.”

But it wasn’t. On January 10, Reuters reported that a storm system moving up the river valley was replenishing the waterway, and though there had been

Barges navigate through a narrowed section of the Mississippi River near St. Louis, MO on Dec. 14, 2012, due to the drop of water levels in the river. The 2012 severe drought has aff ected current fl ow conditions in the Mississippi River and caused low water levels exposing shoals and potentially putting river traffi c at risk for running aground. Barge movements on the Mississippi River are important to U.S. Agriculture for the transportation approximately 50 percent of U.S. grain; such as corn, soybean, wheat and rice. Though water levels are low, the Mississippi River is still open to transportation and the U.S. Department of Agriculture (USDA) continues to work with Federal partners to monitor conditions on this critical waterway for U.S. commodities.

Photo by U.S. Army Corps of Engineers.

[WRE ADVISOR | BUSINESS]

WATERMARKSThe highs and lows of shipping on the Mississippi RiverBY JOE NOLAN

threats of halting shipping between St. Louis and Cairo, Illinois even as little as a week before the report, the weather – along with the brisk removal of underwater rock – was predicted to keep river shipping � owing until mid-February when the change of seasons traditionally causes a rise in river levels. After all the nail-biting regarding shipping on the river in January, the Coast Guard relaxed rigid draft restrictions well before the January 15th “D-Day.” Of course, there was good reason to be worried, and the welcome news about a swiftly rising river didn’t make the Mississippi River shipping industry look like worry warts as much as it underlined how unpredictable the river has become. Of course, investment and industry count on predictability.

Lt. Colin Fogarty is a public a� airs o� cer for the Coast Guard’s upper Mississippi River sector north of Cairo. � e Reuters article quoted him saying, “� e forecasts are looking good. It doesn’t look like we’re going to hit those two thresholds of a minus-six feet in St. Louis and � ebes.” Such low gauge readings at those two locations would have required even stricter draft regulations instead of the unexpected easing.

Hoosier Ag Today is an Indiana agricultural communications company that delivers time-critical information to farmers, rural communities and even commodities investors via local area radio stations and the internet. � ey were keeping a close eye on the river

in January and their January 16 report also cited both rain relief as well as rock removal for keeping the boats a� oat. � e report mentions that the Army Corp of Engineers had � nished the � rst round of a rock removal project at � ebes, IL, subtracting 365 cubic yards of limestone from the channel, creating two full feet of navigable depth. In addition, rains in the area had been heavier and more widespread than previously predicted. Water levels at St. Louis hit a one-month high in January and the level at � ebes surged a full nine feet higher over the weekend of January 12 and 13.

However, just as the industry started to breathe a sigh of relief, Expert Senior Meteorologist Alex Sosnowski reported on Accuweather.com that while levels on the lower Mississippi were up, those on the upper Mississippi appeared to have only experienced a bump and not the long-term relief the industry was hoping for. Sosnowski explained that rains and thaws had helped to push the Ohio river to � ood levels and that when the waterway met the Mississippi at Cairo that it would lead to high levels through Memphis, Tennessee to Vicksburg, Mississippi and, � nally, to New Orleans. Although modest rises were recorded in the Illinois River and other tributaries, the Mississippi between Cairo and Saint Louis seemed to be stuck in a continuing fall with little relief in sight according to Sosnowski. � e record low Mississippi River level in St. Louis is 6.2 feet and the Accuweather



Barges transit the Mississippi River near St. Louis, MO on Dec. 05, 2012.

Photo by U.S. Army Corps of Engineers.

78 MARCH-APRIL 2013 WIRE ROPE EXCHANGE WIRE ROPE EXCHANGE MARCH-APRIL 2013 79

report warned that it might be beaten by the end of January due to continuing cold weather that was preventing both rain and melt along the upper Mississippi.

Part of the problem is that the predicting of the January crisis and the expectation of higher levels in February were both based on historical weather patterns. A Bloomberg article from January 9 quoted Army Corps of Engineers spokesman Michael Petersen saying “� e Corps may also release water from reservoirs further north on the Mississippi should rain be less than expected, he said. Still, the situation will need to be monitored as the worst U.S. drought since the 1930s, which created the low water levels, makes historical patterns a less reliable predictor of future � ows.”

� e Bloomberg article notes that a typical January can see as much as $2.8 billion in cargo like crude, coal and grain carried on the Mississippi. By 2014 the Obama administration would like to see exports at double 2009 levels, but major commodity exporters like Archer-Daniels-Midland in Decatur, Illinois and coal producer Peabody Energy Corp. of St. Louis both ship on the river, and the recent numbers have them nervous. Grain tonnage on the Mississippi at the end of December, 2012 was down more than 25% from the previous year, having fallen drastically a full 26% from the tonnage at the middle of the month.

As they demonstrated in 2011, when the river is high, the locks and dams on the upper Mississippi can be used to control the release of water to mitigate � ood damage and danger. When the river is low, they can divert � ows to critical points before tra� c is forced to a standstill. But, like the infrastructure around the country, the system is in need of a makeover and Agfax.com reported that Iowa Governor Terry Branstad had brought together a wide range of farm commodity groups, community development leaders and environmentalists at the beginning of February, 2013 to talk about the importance of maintaining the resource that gave Mississippi River states in the upper Midwest a competitive shipping advantage, connecting their economies to the world while

providing a critical link in the transportation infrastructure of the U.S. as a whole.

Locks and dams on the upper Mississippi were constructed in the 1930’s and much of the equipment along the waterway is built from original components that are way past their projected 50 year shelf life. Current U.S. Army Corps of Engineers budgets pay for operation and maintenance costs, but that is only about a third of what is needed to upgrade the systems and avoid the possibilities of catastrophic spills or unintended closures do to the failure of overworked, outdated equipment.

Despite massive-seeming costs, the prospects for a major makeover of the system are actually quite good. � e pending opening of the upgraded Panama Canal locks in April 2015 has industry and governments all along the upper Mississippi scrambling to increase capacity on that section of the river. It’s expected that when Panama’s new system opens, the cost of shipping a bushel of American grain to China will drop by more than $.30. Over time, this will lead to such a spike in river tra� c that current plans propose literally doubling the capacity of the lock chambers from 600 to 1200 feet. In the meantime, shipping on the river continues to trickle.

Robert B. Miller and Associates is a barge-operating � rm outside of St. Louis in Clayton, MO. Wire Rope Exchange spoke with co-owner and dispatcher Gordon Miller in late Feb ruary about conditions on the river and how the drought has a� ected his business.

“It’s up about � ve feet,” says Miller. “We’ve been getting just enough to get by.” Like most operators, Miller held his breath at the beginning of January not sure if the shipping channels would remain deep enough to keep tra� c a� oat, but that wasn’t the only problem.

“A lot of times the water is so low that even when the channels are navigable, the docks are high and dry way up on shore so there’s no way to unload,” says Miller. “It was really close for a long time, but we’ve been getting some spring rain and we’re pretty optimistic.” � e day we talked to Miller, St. Louis was buried in snow which will add to a healthy spring melt, and while he’s optimistic about the coming water levels this summer, he’s not sure about business bouncing back so soon.

“Use of the river has dropped o� ,” he says “and that’s not something that comes back right away.” � e same weather that pushed water levels down continues to e� ect agricultural cycles and shipping on the river. Fertilizer shipments would normally keep Miller hopping after the � rst of the year, but most farmers are foregoing additional fertilizer this year because the lack of rain in 2012 means last year’s applications never washed away. � e mild 2011/2012 winter also means that salt shipments weren’t needed this winter because stockpiles up and down the river were still � ush. Last year’s harvest shipments were thinned out by the drought and though Miller believes they will move more this fall, pro� t margins may not return to normal.

“Retail stores hang their hat on Christmas. We hang out hat on harvest,” says Miller. “But now there are so many barges available I’m afraid everyone will be undercutting each other and driving the shipping prices down.” And whether its water levels or shipping pro� ts, when you make your living on the Mississippi you prefer to see your ships on the rise. ❙


way to unload,” says Miller. “It was really close for a long time, but

Photo courtesy of U.S. Army Corps of Engineers.

78 MARCH-APRIL 2013 WIRE ROPE EXCHANGE WIRE ROPE EXCHANGE MARCH-APRIL 2013 79

[ADVERTISER’S INDEX]

(45Yrs)(QxP2xS2)+K+E =

Q=QualityP=People & ProductsS=Safety & ServiceK=KnowledgeE=Experience

Alps is the Answer!

(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP(45Yrs)(QxP xSxSxSxSxSxSxSxS )+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =)+K+E =

Q=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityQ=QualityP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsP=People & ProductsS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceS=Safety & ServiceK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeK=KnowledgeE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=ExperienceE=Experience

Headquarters2530 Production Drive

St. Charles, IL 60174

phone: (630) 893-3888fax: (630) 893-8164

Branch LocationsOhio: (614) 294-0600

California: (626) 458-0055

Florida: (904) 741-6121

www.alpswirerope.com

ALPS WIRE ROPE CORPORATION

“The Pinnacle of Quality”

Headquarters2530 Production Drive

St. Charles, IL 60174

Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Answer!Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Answer!Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the Alps is the

ACRP ................................................................................73 www.acrp.netAll Material Handling ................................10 & 72 www.allmaterialhandling.comAlps Wire Rope ..........................................................79www.alpswirerope.comAssociated Wire Rope & Rigging ................45Associated Wire Rope Fabricators ............56www.awrf.orgThe Caldwell Group ...............................................61www.caldwellinc.comChant Engineering Co., Inc. ..................11 & 39 www.chantengineering.comChicago Hardware & Fixture .........................12www.chicagohardware.comCleveland City Forge ............................................67 www.clevelandcityforge.comCRC/ICHC .......................................................................... 4 www.craneandriggingconference.com The Crosby Group ..................................................53www.thecrosbygroup.comC.S. Osborno Co. .......................................................70www.csosborne.com Cumberland Sales Company .........................35www.cumberlandsalescompany.com Elite Sales ......................................................Back Coverwww.elitesalesinc.com Filtec-Precise ...............................................................27www.fi ltec-precise.com

Gaylin International .............. Inside Back Coverwww.gaylin.com GN Rope Fitting ........................................................73www.gnweb.comHarrington Hoists, Inc .........................................27www.harringtonhoists.comHinderRust ....................................................................59www.hinderrust.com Holloway Houston, Inc .......................................75www.hhlifting.comJtagz, Lty. Ptd. ............................................................72www.jtagz.com Ken Forging, Inc. ......................................................49www.kenforging.comKulkoni .............................................................................14 www.kulkoni.comLandmann Wire.........................Inside Front Coverwww.landmannwire.comLifting Gear Hire Corporation ........................ 6www.lgh-usa.comLift-It Manufacturing Company ................... 3www.lift-it.comModulift ..........................................................................55www.modulift.comMiller Lifting Products ........................................28www.millerproducts.netNew England Ropes ..............................................13www.neropes.comThe Peerless Group ................................................47www.peerlesschain.com

Premier Wire Rope .................................................36www.premierwirerope.comRUD Chain ....................................................................... 6www.rudchain.comSamco Sales, Inc. ......................................................68www.samcosales.comSlingmax .........................................................................65www.slingmax.comSouthern Wire .............................................................. 9www.southernwire.comStrider-Resource ......................................................63www.strider-resource.comSuncor Stainless .......................................................21www.suncorstainless.com Tandemloc .....................................................................71www.tandemloc.com Talurit ................................................................................43www.talurit.com Terrier Lifting Clamps ..........................................51www.terrierclamps.com Van Beest B.V. .............................................................55www.vanbeest.nlWindy Ridge Corporation ................................10www.windyridgecorp.comWirop Industrial Co., Ltd ...................................33www.wirop.com.twYarbrough LLC ............................................................. 1www.yarcable.com

� e veteran picture-taker, lauded for his images of various construction sites across the Bay Area, is a near ubiquitous presence, refusing to allow time of day or even adverse weather to preclude him from recording the historic projects development.

“I’ve been on hand the past � fteen years visually chronicling the progression of the work,” he notes. “I’m there at all hours.”

No minor feat for anyone, it’s especially noteworthy given he is now in the seventh decade of life. But Blum is simply too enamored by his work to let age slow him down - it’s his passion, he attests. Moreover, he’s driven by one overriding goal: Blum hopes he can, through his images, show the public that there is more to the construction of a bridge than just cold, hard steel and lots of sweat equity.

“I think many people see construction as a very physical activity. And it is. It takes tremendous strength and stamina. However, it’s also very cerebral. I don’t believe that’s fully appreciated by most people.”

It’s this uncommon idea, that construction is a sort of labor of love infused with considerable thought and meticulous attentive care on the part of its builders, which Blum strives to capture.

“I want my photos to be a tribute to the laborers. I want to honor and celebrate them as I feel they deserve recognition for their tribulations. � ey do, after all, transform the drawings and concepts of the architects and engineers into awe-inspiring, living structures. � ey rarely get proper credit for what they do.”

Blum, in fact, knows much about the demands workers face. Born in New York, he journeyed to California as a young man back in 1961 and, after studying at the University of California, began a career as a boilermaker, ship� tter, and welder. “I got into the � eld because I had a child and needed work. Over the course of twenty-� ve years, I was employed in various shops and shipyards, continuing on until more and more opportunities began drifting out of the country.”

At one point, Blum worked as an assistant business agent and dispatcher for the boilermakers local. In this role he was

introduced to what would become a second, burgeoning career. “I would visit work sites with the business agent and would bring a camera to record everything. I began taking photos of the people and found myself fascinated by it.

Today, years later, Blum has captured thousands of images from a number of projects including the Al Zampa Memorial Bridge which spans the Carquinez Strait (“It was the � rst bridge I photographed,” he says) and the Four Season Hotel San Francisco. Notably, his images have appeared in a number of prominent publications and places, from the Bancroft Library at the University of California, to the cover of the Crosby Group catalogue, a top-rated resource for rigging products.

Re� ecting back, he � nds no one project stands out. “It would be like a parent trying to pick which child is their favorite. Besides,” he points out, “it’s more about the workers. I’m more interested in them, in telling their story and giving them credit.”

No matter what lies ahead, one thing is clear: Blum has constructed a comprehensive collection as iconic as the structures and people which he highlights. Because of this, his own place in the history books is clearly assured. ❙

MEET JOE BLUMBehind the Lens of a WelderBY PATRICIA GLYNN


Visit the construction site for the East span of the San Francisco–Oakland Bay Bridge and you’re sure to witness hundreds of workers, from pile drivers to carpenters to ironworkers, toiling day and night. Look closer and you might also notice, tucked away in some seemingly perilous nook and always with camera in hand, seasoned photographer Joe Blum.

For any inquiries about Blum’s photography, please contact Joe Blum directly at: [email protected]

[RIGGER’S CORNER]

Ironworkers on Yerba Buena Island by Joseph A. Blum©

customize a solution that meets your needs.customize a solution that meets your needs.

That’s the Elite Sales advantage. As one hat’s the Elite Sales advantage. As one of the leading importers and wholesale of the leading importers and wholesale distributors of Wire Rope, Cable, Strand, distributors of Wire Rope, Cable, Strand, Chain and Hardware in the U.S., you can Chain and Hardware in the U.S., you can always expect unprecedented expertise, always expect unprecedented expertise, value, quality, service and reliability.value, quality, service and reliability.

Wire Rope, Cable, & Strand up to 6” Diameter Wire Rope, Cable, & Strand up to 6” Diameter Grade 30, 43, 70, 80, 100 Chain Grade 30, 43, 70, 80, 100 Chain Wire Rope Hardware, Fittings & Accessories Wire Rope Hardware, Fittings & Accessories Chain Hardware, Fittings & Accessories Chain Hardware, Fittings & Accessories Tie Downs & Tie Downs & Related Hardware Blocks & Accessories Blocks & Accessories Bright, Galvanized & Stainless Steel Bright, Galvanized & Stainless Steel

1-800-458-66591-800-458-6659 www.elitesalesinc.com www.elitesalesinc.com

NEXT DAY DELIVERY

EXECUTIVE OFFICEEXECUTIVE OFFICE9445 S.W. 40 Street, Second Floor9445 S.W. 40 Street, Second FloorMiami, FL 33165Miami, FL 33165P. 305.262.3105 F. 305.262.2094P. 305.262.3105 F. 305.262.2094

TAMPA WAREHOUSETAMPA WAREHOUSE603 N. 19 Street603 N. 19 StreetTampa, FL 33605Tampa, FL 33605P. 813.247.2094 F. 813.248.2821P. 813.247.2094 F. 813.248.2821

HOUSTON WAREHOUSEHOUSTON WAREHOUSE2003 Edwards Street2003 Edwards StreetHouston, TX 77007Houston, TX 77007P. 713.861.4203 F. 713.861.4280P. 713.861.4203 F. 713.861.4280

Elite Sales has a deep and varied line of Elite Sales has a deep and varied line of inventory with thousands of products always inventory with thousands of products always in stock. And if we don’t have it, we will in stock. And if we don’t have it, we will

Don’t get Tangled up with the Wrong Supplier

April 2013 Wire Rope Exchange

Documents

wire rope slings

hook wire rope rigging

wire rope technicians

quality wire rope blocks

rigging needsyour

fullservice rigging

yarbrough locations

cable service