Application of the Application of the Process Safety Process Safety Management Standard in Management Standard in Canada Canada Presented by: Presented by: Holly Elke, Holly Elke, CRSP, CSP, CMQ/OE CRSP, CSP, CMQ/OE Senior QHSE Advisor Senior QHSE Advisor SH&E System Solutions SH&E System Solutions
28
Embed
Application of the Process Safety Management Standard in Canada
Application of the Process Safety Management Standard in Canada. Presented by: Holly Elke, CRSP, CSP, CMQ/OE Senior QHSE Advisor SH&E System Solutions. Process Safety Management. Also called Safety Systems Management or Process Safety Management; - PowerPoint PPT Presentation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Application of the Process Application of the Process Safety Management Safety Management Standard in CanadaStandard in Canada
Senior QHSE AdvisorSenior QHSE AdvisorSH&E System SolutionsSH&E System Solutions
Process Safety ManagementProcess Safety Management
Also called Safety Systems Also called Safety Systems Management or Process Management or Process Safety Management;Safety Management;
The purpose is to manage The purpose is to manage the risk to personnel, the risk to personnel, property, production, the property, production, the environment and the environment and the company reputationcompany reputation
Process Safety ManagementProcess Safety Management
Regulated in 1992 by OSHARegulated in 1992 by OSHA Known as the Process Safety Known as the Process Safety
Management (PSM) Standard Management (PSM) Standard of Highly Hazardous of Highly Hazardous Chemicals, Explosives and Chemicals, Explosives and Blasting Agents: OSHA 29 Blasting Agents: OSHA 29 CFR 1910.119.CFR 1910.119.
Process Safety ManagementProcess Safety Management
Process Safety ManagementProcess Safety Management
The main objective is to The main objective is to prevent the release of prevent the release of highly hazardous chemicals, highly hazardous chemicals, such as toxic, reactive, such as toxic, reactive, flammable and/or explosive flammable and/or explosive substances, which may substances, which may cause harm to humans.cause harm to humans.
Process Safety ManagementProcess Safety Management
Processes that involve:Processes that involve: Explosives, blasting agents Explosives, blasting agents
and pyrotechnics;and pyrotechnics; Chemicals, above a specified Chemicals, above a specified
quantity in Appendix A of the quantity in Appendix A of the PSM std.PSM std.
Flammable liquid or gas in Flammable liquid or gas in excess of 10000 lbsexcess of 10000 lbs
Process Hazards Analysis Process Hazards Analysis is the predictive is the predictive identification of hazards, identification of hazards, their cause and their cause and consequence and the consequence and the qualitative estimation of qualitative estimation of likelihood and severity.likelihood and severity.
Frequency of Exposure Probability Loss = Likelihood
FREQUENCY OF EXPOSURE:
4 - Frequent (at least daily)3 - Occasional (> 1 occurrence per month)2 - Rare (< 2 occurrences per year)1 - No significant exposure (once every 3 years)
PROBABILITY OF LOSS:
4 - Expected (“Happens often”; > 1 per month)3 - Occasional (< 2 occurrences per year)2 - Rare (< 1 occurrence every 3 years) 1 - Very Rare (“Once in the life of the facility”)
Human Factors or ErrorsHuman Factors or ErrorsHUMAN FAILURE
ERRORS VIOLATIONS
• Deliberate actions• Different from those prescribed• Carries known associated risks• Ignores operational procedures• Violation errors occur because of a
perception of lack of relevance, time pressure or laziness.
• Competency exists• Intentions are correct• Slips occur while
carrying out habitual, routine, skill based activity.
• Incorrect intention• Inadequate knowledge• Incorrect information processing• Inadequate training• Mistakes occur because of incorrect
assumptions or incorrect “tunnel vision” application of rules.
SLIPSMISTAKES
Site or Location HazardsSite or Location Hazards
Adjacent facilitiesAdjacent facilities Nearby communitiesNearby communities Transport availabilityTransport availability Availability of Utilities;Availability of Utilities; Topography/ average Topography/ average weather conditions;weather conditions; Environmental sensitivity;Environmental sensitivity; Layout considerations regulations, Layout considerations regulations, standards location/spacing, occupancy, standards location/spacing, occupancy, extreme process conditionsextreme process conditions
9. VacuumCondensing of gases, loss of liquid level.Ex. Maintenance - steaming of vessels.
10. HP / LP Interface PressureIntroduction of high pressure into a low pressure system.Ex. DP across control valve when flow on one side is 600 psig and flow on other side is 900 psig.
11. High Temperature Higher than design temperature.Ex. Temperature control valve failure.
PHA MethodologiesPHA Methodologies
Hazard & Operability Study;Hazard & Operability Study; What-IF, Checklist or What What-IF, Checklist or What
If/Checklist study;If/Checklist study; Failure Mode and Effects Failure Mode and Effects
Analysis (FMEA, FMECA);Analysis (FMEA, FMECA); Fault Tree Analysis (FTA);Fault Tree Analysis (FTA); Or an appropriate equivalent Or an appropriate equivalent
Drawings broken into Nodes Drawings broken into Nodes are assessed.are assessed.
What – If / ChecklistWhat – If / Checklist
Requires experienced and Requires experienced and knowledgeable team members;knowledgeable team members;
A series of “what if” questions A series of “what if” questions are asked for each system / are asked for each system / subsystem;subsystem;
Each question represents the Each question represents the potential for equipment failure or potential for equipment failure or an error in operating procedure.an error in operating procedure.
PHA MethodologiesPHA Methodologies
FMEAFMEA
Initially used in aerospace and Initially used in aerospace and automotives to predict the automotives to predict the reliability of complex products;reliability of complex products;
The method determines how The method determines how and how often the components and how often the components of a product could fail;of a product could fail;
Evaluates the effects of failures Evaluates the effects of failures on a system.on a system.
Fault Tree AnalysisFault Tree Analysis
Developed by Bell Laboratories Developed by Bell Laboratories for the US Air Force;for the US Air Force;
Focuses on the possibility of Focuses on the possibility of one undesired event occurring;one undesired event occurring;
Maps the complex relationships Maps the complex relationships that can cause the event by that can cause the event by including all of the contributory including all of the contributory factors that are known.factors that are known.
Selecting the “Right Method”Selecting the “Right Method”
Purpose of the study;Purpose of the study; Type of results desired;Type of results desired; Type of information available;Type of information available; Relative risks associated with Relative risks associated with
the chemicals, the process the chemicals, the process and/or the facility location;and/or the facility location;
PHA team experience level;PHA team experience level; Past IncidentsPast Incidents Development stage of facility.Development stage of facility.
Corrective Action Management Corrective Action Management and Closureand Closure
““Due diligence” can only Due diligence” can only be shown if every effort be shown if every effort has been made to has been made to implement and verify that implement and verify that the actions needed to the actions needed to make the process safe make the process safe have been taken.have been taken.
The Closure LoopThe Closure Loop Assign responsibility to Assign responsibility to
recommendations;recommendations; Use a flexible CAR management system Use a flexible CAR management system
that leaves a “paper trail”;that leaves a “paper trail”; Document the resolution of Document the resolution of
recommendations;recommendations; Acceptance, rejection, substitution, or Acceptance, rejection, substitution, or
modificationmodification of any recommendation of any recommendation must be documented;must be documented;
Rejection of a recommendation must be Rejection of a recommendation must be communicated to the study team.communicated to the study team.