Civil, Construction and Environmental Engineering Conference Presentations and Proceedings Civil, Construction and Environmental Engineering 2015 Applicability and Limitations of 3D Printing for Civil Structures Mostafa Yossef Iowa State University, [email protected] An Chen Iowa State University, [email protected] Follow this and additional works at: hp://lib.dr.iastate.edu/ccee_conf Part of the Civil Engineering Commons , Construction Engineering and Management Commons , Other Civil and Environmental Engineering Commons , and the Other Engineering Commons is Conference Proceeding is brought to you for free and open access by the Civil, Construction and Environmental Engineering at Iowa State University Digital Repository. It has been accepted for inclusion in Civil, Construction and Environmental Engineering Conference Presentations and Proceedings by an authorized administrator of Iowa State University Digital Repository. For more information, please contact [email protected]. Recommended Citation Yossef, Mostafa and Chen, An, "Applicability and Limitations of 3D Printing for Civil Structures" (2015). Civil, Construction and Environmental Engineering Conference Presentations and Proceedings. 35. hp://lib.dr.iastate.edu/ccee_conf/35
Applicability and Limitations of 3D Printing for Civil Structures
Jun 29, 2023
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Related Documents
![Influence of gas compressibility on a burning accident in a ...€¦ · which may identify the applicability and limitations of the incompressible theory [6]. For simplicity, here](https://static.cupdf.com/doc/110x72/5f0f4f6a7e708231d4438705/iniuence-of-gas-compressibility-on-a-burning-accident-in-a-which-may-identify.jpg)
