1 Saf-T Vent ® Appliance Adapters AL 29-4C ® Stainless Steel Special Gas Vent Technical and Dimensional Data Saf-T Vent ® Appliance Adapters 5030 Corporate Exchange Blvd Grand Rapids, MI 49512 Call (800) 772-0739 Fax (800) 972-1421 www.heatfab.com Heatfab Saf-T Vent Adapters are compatible with all Saf-T Vent Brands Appliance Listing by Make and Model starts on page 23 Pub.#11701-7/20/15 Information is subject to change without notice
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Saf-T Vent®Appliance Adapters
AL 29-4C® Stainless SteelSpecial Gas Vent
Technical and Dimensional Data
Saf-T Vent®
ApplianceAdapters
5030 Corporate Exchange BlvdGrand Rapids, MI 49512
Call (800) 772-0739Fax (800) 972-1421
www.heatfab.com
Heatfab Saf-T Vent Adapters are compatible with all Saf-T Vent Brands
Appliance Listing by Make and Model starts on page 23
Pub.#11701-7/20/15
Information is subject to change without notice
2
Saf-T Vent®Appliance Adapters
3" ADAPTERS 3
4" ADAPTERS 7
UNIVERSAL BOILER ADAPTERS 10
PVC/CPVC OUTLET READY ADAPTERS 11
FLANGE TYPE ADAPTERS 12
AERCO ADAPTERS 13
BUDERUS ADAPTERS 15
FULTON ADAPTERS 17
HYDROTHERM ADAPTERS 17
LAARS ADAPTERS 16
LOCHINVAR ADAPTERS 16
NORITZ ADAPTERS 18
NOMINAL MALE OUTLET ADAPTER 18
P-K MACH ADAPTERS 18
RAYPAK ADAPTERS 20
RINNAI ADAPTERS 21
DEDIETRICH 21
APPLIANCES, LISTED BY MAKE AND MODEL W/APPROPRIATE ADAPTER 23
ADAPTER PAGE
3
Saf-T Vent®Appliance Adapters
34.25
3.04 OD
9301AMTK 9301CRWN
9301ICP 9301THI 9301UTI 9301VSMN
3.00 OD
3
3.5
3.10 OD
9353BUREZ
3" Adapters —Adapters for appliances with 3" flue collars.
Ø5.38
3
Ø0.22
Ø4.88BC
Burnham(Gasketed) toSaf-T Vent EZ
Saf-T Vent EZ toBurnham
(Gasketed)
2.7
3
64
1.63
3
4
Saf-T Vent®Appliance Adapters
9301VAIL
9301MOD
3" Adapters —Adapters for appliances with 3" flue collars.
5.31
.38
5.25 3.16 ID
3.68
35
2
2.37 ID (60mm)
9301PAL 9302PL 93PLSTEE
Ø0.27
Ø3.53 BC
Ø4.00
9302 MOD12
10.5
3.1
12
3.25
10.5
3.06
2.875
Ø .182 HOLES180° APART
2.50
5
Saf-T Vent®Appliance Adapters
5.5
3.8
.5
9SF440696 9SF440697
3" Adapters —Adapter for appliances with 3" flue collars.
3.08
3.8
4.5
5.88
2.85
1.62
9314SMI
3
4
9301BSH
9301DEL
4.001.69
3.2 ID
6
Saf-T Vent®Appliance Adapters
4.002.88
CLAMP
3" Weil-McLain Adapters —Adapters for Weil-McLain appliances.
5.25
.38
3.68
5.31
CLAMP3
3.52
2.64
4.64
3.75
93WMSTLH 93WMSTLV
93WMSTEE 93WMSTXL
93WMCGIS 93WMSTRT
2.55
CLAMP
4.5
4.25
CLAMP
CLAMP
7.0
6.25
8.87.17
.63
6
3
7
Saf-T Vent®Appliance Adapters
Ø0.22
Ø5.38Ø4.88
2.75
4" Adapters —Adapters for appliances with 4" flue collars.
6
1
4.04 ID
9401CRWN
34.25
4.04 OD
9401AMTK
9401DUN
9454BUREZ
Burnham(Gasketed) toSaf-T Vent EZ
Saf-T Vent EZ toBurnham
(Gasketed)
6 6
1.63 1.62
4
8
Saf-T Vent®Appliance Adapters
3
3.724.50 CLAMP
64.38
4.03 ID 9401ICP 9401MES
4" Adapters —Adapters for appliances with 4" flue collars.
9401PVI 9401RHM
32
4.06
9401MGTV 9401JVI
6
4.01
4.25
6
1
4.06
9
Saf-T Vent®Appliance Adapters
9414SMI
4" Adapters —Adapters for appliances with 4" flue collars.
9401VSMN
64.5
4.15 OD
9401UTI
6
4.04OD
9401VAIL9401SRI
1.62
5.55
3.85
6.25
6
4.15 OD
10
Saf-T Vent®Appliance Adapters
Universal Over-the-Flue-Collar Appliance Adapter — A generic flue collar adapter used on appliances withvent outlets that are slightly out-of-round or of irregular diameters. The split-seam design allows the adapter to clamp around irregular orinconsistent flue collars while still providing a secure connection to Saf-T Vent systems. Field RTV silicone connection as necessary.
Universal Into-the-Flue-Collar Appliance Adapter — A generic flue collar adapter used on appliances withvent outlets with a nominal inside diameter. The crimped portion of this adapter is inserted into the flue collar while the hose clamp istightened around the outside to create a mechanical joint. Field RTV silicone connection as necessary.
B
E
A
CD
Into-the-Flue-CollarAppliance Adapter
A
C
B
D
Slim Fit adapter — These adapters have been designed specifically to connect to the outlet of the Weil-McLain Slim Fit appliance.
11
Saf-T Vent®Appliance AdaptersUniversal Boiler Adapter— Used horizontally or vertically to adapt Saf-T Vent CI Plus to nominal diameter fluecollars, it can also adapt to boiler collars that are slightly out of round. The adapter comes with a joint locking strap, boiler collarclamp and a 8" coupler band. Field RTV silicone connection as necessary.
Part Number DIM - A DIM - B Nominal Nominal Diameter
PVC/CPVC Outlet Boiler Adapter— Used to connect to PVC/CPVC pipe outlet ready appliances. OD equalsPVC/CPVC pipe OD. Field RTV silicone connection as necessary.
Flange-Type Appliance Adapter — A generic adapter used on appliances with a vent outlet that includes a bolted-onflange connection. Bolt holes and hardware are provided by the installer. Custom bolt hole patterns can be provided for an additionalcharge. Each Saf-T Vent CI Plus appliance adapter comes standard with a 8” long and a 5" long Saf-T Vent CI Coupler, the Saf-T Vent Ciappliance adapter comes standard with a 12" long Saf-T Vent CI Coupler.
Part Number DIM - A DIM - B DIM - C Nominal Installed Flange Diameter Length Diameter
CCA05ADFL 5 12 8CCA06ADFL 6 12 9CCA07ADFL 7 12 10CCA08ADFL 8 12 11CCA09ADFL 9 12 12CCA10ADFL 10 12 13CCA12ADFL 12 12 15CCA14ADFL 14 12 17CCA16ADFL 16 12 19Sizes available up to 32". Call customer service for pricingNote: Bolt Holes are to be field installed.
Part Number DIM - A DIM - B DIM - CNominal Installed FlangeDiameter Length Diameter
Aerco Elbow Adapter —90° elbow adapters for Aerco appliances. Note: To avoid water system supply and returnpiping, this fitting must be rotated from the vertical position.
CCA14ADBK
15
Saf-T Vent®Appliance Adapters
8.70
8.00
7.78
4.00
6.69
6.22
3.63
7.63
Part Number DIM - A DIM - B DIM - C DIM - D DIM - ENominal Male End Overall Length Crimp Length MaximumDiameter Crimp O.D. Clamp Diameter
Buderus Appliance Adapter — This adapter is specially designed to connect directly into the vent outlet of Buderus SBSeries boilers. The hose clamp is tightened around the outside of the flue collar to create a mechanical joint.
C
A
B
D
E Buderus SB Boiler Adapter
C
B
D
A
E
*9601SB
8.00
6.22
3.80
7.78
3.50
8.00
9601GB 9801GBBuderus GB Boiler Adapters
96GBCPVC 98GBCPVC
This adapter is specially designed to connect directly into the vent outlet of Buderus GB Series, 9_01GB has Saf-T Vent EZ seal ends, the9_GBCPVC is for connectiong to CPVC venting. Note: Consult local building code when venting with CPVC.
16
Saf-T Vent®Appliance Adapters
A
4.9
8.75
7.25
5.50 CLAMP
B
C
A
D
Lochinvar Adapter —Adapters for Lochinvar appliances.
Part Number DIM - A DIM - B DIM-C DIM-D Nominal Overall Installed
Diameter Diameter Length Length Use
9454LOCH 4 4.5 6 4.38 Sidewall Vent Cap Adapter9555LOCH 5 5.5 6 4.38 Sidewall Vent Cap Adapter9514LOCH 5 Appliance Adapter
9514LOCHSidewall VentCap Adapter
Laars MightyMax Adapter — This adapter is specially designed to connect directly to the vent outlet of a Laars MightyMaxBoiler. This part is supplied by Laars Heating Systems with MightyMax Boilers that require AL 29-4C® venting.
Part Number DIM - A DIM - B DIM - C DIM - DNominal Installed Plate Size Bolt CentersDiameter Length
Fulton Muffler Adapters —These adapters make the connection between Saf-T Vent products and Fulton ExhaustMufflers. The 9401FMA is to connect to the 4" muffler and the 9601FMA is for the 6" muffler, both are made to connect to either single wallEZ Seal or double wall CI Plus.
9401FMA9601FMA
Hydrotherm Adapter —These adapters come with the Hydrotherm KN2, 4, 6, 10, 20, 30, but must be specified when ordering.
.
9601KN10
Ø9.00
Ø0.40
Ø7.75
3"
CCA06ADKN(optional for doublewallKN10)
3"
This adapter makes the connectionbetween Fulton Pulse PHW2000(QT) toconnect to either single wall EZ Seal ordouble wall CI Plus
Fulton Adapters
6
1/4" PIPE PLUG
3" NPT
9301FUL 9401FUL
9601FUL
6
1/4" PIPE PLUG
4" NPT
9401PHW
9601KN06
9678KN20
9801KN3056-3345 (KN4)
56-3346 (KN2)
18
Saf-T Vent®Appliance Adapters
Patterson-Kelley Modu-Fire Adapter — These adapters are specially designed to connect directly to the vent outletof Patterson Kelley Modu-Fire Boilers, MFD Series (Forced Draft). Consult Patterson-Kelley installation instructions on the use ofreducing adapters.
9801PK08
Part Number DIM - A DIM - B DIM-C DIM-D Nominal Overall Installed
Noritz Adapter —This adapter makes the connection between Saf-T Vent products and Noritzwater heaters that require 5" diameter vent.
64
4.79
5
9501NOR
9801PK06 96_PKMODU
C
B
D
A
B
1.75
C
A
B
C D
A
B
C
1.75
A
Nominal Male Outlet Adapter — This adapter is specially designed to connect directly tothe vent outlet of an appliance using a nominal ID outlet. Field RTV silicone may be required at the connection.
19
Saf-T Vent®Appliance Adapters
Part Number DIM - A DIM - B DIM-C DIM-D Nominal Overall Installed
P-K Mach Adapter — These adapters are specially designed to connect directly to the vent outlet of P-K Mach BoilersNote: Not all adapters are equipped with a test port and drain.
B
C
A
D
91001MACH & 91002MACH
9100_PK_
P-K Mach Adapter — These adapters are specially designed to connect directly to the vent outlet of P-K Mach Boilers and adaptto CPVC venting. Note: Consult local building code when venting with CPVC
Part Number DIM - A DIM - B DIM-C DIM-D Nominal Overall Installed
Raypak Boiler Adapter — This adapter is specially designed to connect directly into the vent outlet of Raypak’s ADB orHigh Delta boilers. The hose clamp is tightened around the outside of the flue collar to create a mechanical joint.
Raypak Boiler Adapter
Raypak Vent Cap Adapter — This adapter makes the connection between Saf-T Vent products and Raypak's FlueExhaust Vent Cap.
Part Number DIM - A DIM - B Nominal Overall Diameter Length
General Notes:The following appendix includes adapters from all of Heatfab’s Saf-T Vent brands.Adapters are listed by the appliance manufacturer.Heatfab Saf-T Vent adapters are compatible with all of Saf-T Vent brands pipes and fittings.EZ Seal to CI Plus and CI Plus to EZ Seal require an adapter, CCA_ADSV, refer topublication PI-CCADSV.Some adapters may require additional field silicone at the interface of the connection.
Terms:
Factory Accessory (HF) – This is an accessory supplied by the Appliance Manufacturer forsome venting configurations. The vent connection on the accessory is equipped withHeat-fab’s standard female end. No separate adapter is required.
Factory Supplied (Gen.) – The appliance is shipped with a generic flue collar that will accepta standard male end of a Heat-fab Saf-T Vent product. No separate adapter is required.
Factory Supplied (HF) – The appliance’s flue collar is equipped with Heatfab’s standardfemale end. No separate adapter is required.
Don’t See Your Appliance? Call Heat-fab – If an appliance adapter is not listed for yourapplication please call Heatfab at 800-772-0739 for our current recommendation.
Appliance Makes and Models:
23
Saf-T Vent®Appliance AdaptersManufacturer Make & Model