Welcome message from author
WelcomeWelcomeWelcome
Transcript
Boot Camp Installation & Setup GuideContents
2
3 Introduction 4 What You Need 4 Installation Overview 4 Step 1: Run Boot Camp Assistant 5 Creating a Partition for Windows 5 If You Have Problems Creating a Partition 6 Step 2: Install Windows 7 Selecting and Formatting the Windows Partition 9 Setting Up Windows 9 If You Have Problems Installing Windows 9 If you get a message saying “Installer Disc Not Found” when you try to install
Windows 9 If the Windows installer isn’t responding 9 If Windows didn’t install properly 9 Step 3: Install the Boot Camp Drivers for Windows 10 If You Have Problems Installing the Device Drivers 11 Starting Up Using Mac OS X or Windows 11 Setting the Default Operating System 12 Selecting an Operating System During Startup 12 If You Have Problems Using Windows on Your Mac 12 For more troubleshooting information 12 If the screen is blank or distorted 12 If you can’t rename the Windows partition 12 n 12 Removing Windows from Your Computer 13 Upgrading 13 If You’re Upgrading from a Previous Version of Boot Camp 13 Upgrading Windows XP to Windows Vista 14 Learning More, Support, and Feedback
Contents
3
Setting Up Boot Camp
This document shows you how to install and set up Boot
Camp so you can use Microsoft Windows on an Intel-based
Mac computer.
Introduction
NOTICE: Make sure to back up all of your data before using Boot Camp, and regularly back up data while using the software.
Boot Camp lets you install Windows on a Mac computer, using a Microsoft Windows installation disc that you provide. Windows is installed on its own partition. After installation, you can use either Windows or Mac OS X on your Mac.
The Boot Camp Assistant application helps you create the Windows partition and restart your Mac using your Windows installation disc. Then you follow these instructions to install Windows and install software drivers that let Windows work with your Mac hardware.
Important: Before you use Boot Camp Assistant, print this document. It contains information you’ll need while installing Windows.
4
What You Need A Mac computer with:
A USB keyboard and mouse, or a built-in keyboard and trackpad
Mac OS X version 10.6 or later (the latest version of Mac OS X is strongly recommended)
At least 10 GB of free space on an internal disk
A built-in optical disc drive or a compatible external optical drive
For information on using your computer with an external optical drive, see the documentation that came with your computer.
A Mac OS X version 10.6 installation disc
One of the following:
Windows XP Home Edition or Professional with Service Pack 2 or later
Windows Vista Home Basic, Home Premium, Business, or Ultimate
Important: You must use a single full-install Windows installation disc (Service Pack 2 is required for Windows XP installations). Do not use an upgrade version of Windows and do not install an earlier version of Windows XP and attempt to update it later to SP2 or later. Use only 32-bit versions of Windows. If you have a Mac Pro or a MacBook Pro introduced in early 2008 or later, you can use a 64-bit version of Windows Vista.
Installation Overview
Installing Windows on your Mac computer involves the following steps:
Step 1: Run Boot Camp Assistant. Boot Camp Assistant creates a partition for Windows and starts the Windows installer.
Step 2: Install Windows.
Step 3: Install the Boot Camp drivers on your Windows volume.
Important: Before you begin, make sure you have a backup of the important information on your computer.
Step 1: Run Boot Camp Assistant
Boot Camp Assistant helps you create a new partition for Windows and gets you started with the Windows installation.
Important: If you are using a portable computer, connect the power adapter before continuing.
5
To use Boot Camp Assistant: 1 Log in to an administrator account on your computer, quit all open applications, and
log out any other users on your computer.
2
Install all available updates. If your computer restarts after installing an update, choose
3 Open Boot Camp Assistant (in the Utilities folder in the Applications folder).
Creating a Partition for Windows Boot Camp Assistant lets you choose the size for your Windows partition, and then creates that partition on your internal disk drive without erasing any data.
Note: If your computer has more than one internal disk and you want to install Boot
numbered bays. You can reinstall the drives after you install Boot Camp.
Refer to your Windows installer documentation to help you determine the best partition size for your system. Windows Vista requires more disk space than Windows XP.
If you’re installing Windows XP and your Windows partition can be 32 GB or smaller, you can choose between two formats for that partition. You’ll select the format in a later step, but you must decide on a format now so you can choose an appropriate size. Here are the two formats:
to the Windows volume from Mac OS X. This partition can be any size.
Windows volume from Mac OS X. This partition must be 32 GB or smaller.
If you’re installing Windows Vista, the Windows partition must use the NTFS format.
If You Have Problems Creating a Partition If you have problems creating a Windows partition, check the following:
The disk must be a single partition, formatted as a Mac OS Extended (Journaled). If the disk already has more than one partition, you must repartition it.
The disk must be an internal disk. You cannot use Boot Camp Assistant to install Windows on an external disk.
6
failed,” try repairing the disk using Disk Utility and running Boot Camp Assistant again. If that doesn’t work, back up all the information on your computer, start up from your Mac OS X installation disc, and erase the disk using Disk Utility. Restore the information to your computer from the backup and try running Boot Camp Assistant again.
Step 2: Install Windows
Read and follow these instructions for installing Windows on your Mac computer. Refer to your Windows documentation for general information about installing and setting up Windows.
To install Windows on your Mac computer: 1 If you already quit Boot Camp Assistant without installing Windows:
a Open Boot Camp Assistant.
b Select “Start the Windows installer.”
c Click Continue.
3 In Boot Camp Assistant, click Start Installation.
4 Your computer starts up from the Windows installation disc. Follow the onscreen instructions. Refer to the following sections for more information.
Selecting and Formatting the Windows Partition It’s important to select the correct partition when installing Windows so that you don’t overwrite Mac OS X on your computer. You’ll then choose the correct format.
NOTICE: Do not create or delete a partition, or select any partition other than as noted below. Doing so may delete the entire contents of your Mac OS X partition.
7
To select and format the correct partition for Windows Vista: 1 Select “Disk 0 Partition 3 BOOTCAMP.”
2 Click “Drive options (advanced).”
3 Click Format, and then click OK.
4 Click Next.
8 SectionTitle
To select and format the correct partition for Windows XP: 1
2 Select an NTFS or FAT format:
to the Windows volume from Mac OS X.
Windows volume from Mac OS X. This option is available only if the Windows partition is 32 GB or smaller.
Important:
9
Setting Up Windows After you install the Windows software, your computer automatically restarts using
If You Have Problems Installing Windows If you have problems installing Windows, try the following solutions.
If you get a message saying “Installer Disc Not Found” when you try to install Windows Make sure you’re logged in to Mac OS X as an administrator.
If the Windows installer isn’t responding Be sure you are using the original keyboard and mouse that came with your computer.
If you’re using an Apple Mighty Mouse, the Windows installer may not respond if the mouse is connected directly to your computer. Connect the Mighty Mouse to the USB port on your keyboard.
If Windows didn’t install properly Verify that you are using an original, full version of Windows XP Home Edition or Professional with Service Pack 2 or later, or Windows Vista Home Basic, Home Premium, Business, or Ultimate. Media Center, OEM, and upgrade versions of Windows XP are not recommended.
Restart your computer and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc. Select the Windows installation disc icon and then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Step 3: Install the Boot Camp Drivers for Windows
Windows using your Mac OS X installation disc.
The Mac OS X disc installs drivers to support Mac components, including AirPort, built- in iSight camera, the Apple Remote, the trackpad on a portable Mac, and the function keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and the Apple Boot Camp system tray item.
10
To install the Boot Camp drivers: 1 Eject the Windows installation disc.
2 Insert the Mac OS X disc.
If the installer doesn’t start automatically, browse the disc using Windows Explorer
3 Follow the onscreen instructions.
If a message appears that says the software you are installing has not passed Windows Logo testing, click Continue Anyway.
If nothing appears to be happening, there may be a hidden window that you must respond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
Note: Periodically, Apple may provide updated Boot Camp drivers, which you can download and install using Apple Software Update. To check for updated drivers manually, go to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers: 1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorer
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you are installing has not passed Windows Logo testing, click Continue Anyway.
if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
11
2 Quit AutoRun if it opens.
3 Using Windows Explorer, locate the driver that you want to reinstall.
4 Open the driver to start the installation.
Starting Up Using Mac OS X or Windows
Once you’ve installed Windows and the Boot Camp drivers, you can start using Windows on your Mac. Boot Camp makes it easy to start up your computer using either Mac OS X or Windows. You can set the default operating system for your computer using Startup Disk preferences (Mac OS X) or the Boot Camp control panel (Windows). You can also select an operating system as your computer is starting up.
Setting the Default Operating System You can use the Startup Disk pane of System Preferences in Mac OS X to set the default operating system for starting up your computer. Boot Camp also installs a Boot Camp control panel that lets you set the default operating system when you’re using Windows.
To set the default operating system in Mac OS X: 1
3 Select the startup disk with the operating system you want to use by default.
4 If you want to start up that operating system now, click Restart.
To set the default operating system in Windows: 1 In Windows, click the Boot Camp icon in the system tray and choose Boot Camp
Control Panel.
Note:
2 Select the startup disk with the operating system you want to use by default.
3 If you want to start up that operating system now, click Restart.
To restart in Mac OS X using the Boot Camp icon in the system tray:
In Windows, click the Boot Camp icon in the system tray and choose “Restart in Mac OS X."
This also sets the default operating system to Mac OS X.
12
Selecting an Operating System During Startup You can select which operating system to use during startup by holding down the Option key. This displays icons for all available startup disks, and lets you override the default setting for the startup disk in Startup Disk preferences (Mac OS X) or the Boot Camp control panel (Windows) without changing that setting.
To select an operating system during startup: 1 Restart your computer and hold down the Option key until disk icons appear
onscreen.
2 Select the startup disk with the operating system you want to use, and then click the arrow beneath the icon.
If You Have Problems Using Windows on Your Mac If you’re having trouble using Windows on your Mac, try the following solutions.
For more troubleshooting information Go to www.apple.com/support/bootcamp.
If the screen is blank or distorted Some graphics cards may not work with both Mac OS X and Windows on a Mac computer. If you’re having trouble with your screen display when using Windows, try the following:
Use the graphics card that came with your Mac.
Make sure you’ve installed the Boot Camp drivers. See “Step 3: Install the Boot Camp Drivers for Windows” on page 9.
Adjust the screen resolution setting in the Display control panel.
If you can’t rename the Windows partition You can rename the Windows partition only in Windows. Start up in Windows and right-click the C: drive in Windows Explorer. Then type a name.
www.apple.com/support/bootcamp and search for “RAID.”
Removing Windows from Your Computer
How you remove Windows from your computer depends on whether you installed Windows on a single-volume disk or on a second disk partition.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as described below, remove Windows by deleting the Windows partition and restoring the disk to a single-partition Mac OS X volume.
13
If your computer has multiple disks and you installed Windows on a disk that has only one partition: Start up in Mac OS X and use Disk Utility (in the Utilities folder in the Applications folder), to erase the disk and reformat it as a Mac OS X volume.
To delete Windows and the Windows partition: 1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Create or remove a Windows partition” and click Continue.
5 Do one of the following:
If your computer has a single internal disk, click Restore.
If your computer has multiple internal disks, select the disk with Windows on it, and then select “Restore to a single Mac OS partition” and click Continue.
Upgrading
These sections describe how to upgrade Windows or your version of Boot Camp.
If You’re Upgrading from a Previous Version of Boot Camp If you’ve already installed Windows on this computer with a previous version of Boot Camp Assistant, you just need to install the updated Mac drivers for Windows.
Important: If you’ve customized your Windows environment, write down your settings before updating the drivers.
To install the updated Mac drivers for Windows: 1 Restart your Mac using Windows.
2 Insert your Mac OS X version 10.6 installation disc.
If the installer doesn’t start automatically, browse the disc using Windows Explorer and
3 Click Repair.
Upgrading Windows XP to Windows Vista You can upgrade Windows XP to Windows Vista using a licensed copy of Windows Vista Home Basic, Home Premium, Business, or Ultimate. After upgrading to Windows Vista, you must reinstall the Boot Camp drivers.
To upgrade Windows XP to Windows Vista: 1 Restart your Mac using Windows.
2 Insert your Windows Vista installation or upgrade disc.
3 Follow the instructions that came with Windows Vista.
4 After completing the Windows Vista upgrade, insert your Mac OS X installation disc.
If the installer doesn’t start automatically, browse the disc using Windows Explorer and
Learning More, Support, and Feedback
For more information about Boot Camp, go to www.apple.com/bootcamp.
For Boot Camp support, go to www.apple.com/support/bootcamp.
Apple welcomes your feedback on Boot Camp. To submit feedback, go to www.apple.com/macosx/feedback.
Apple does not provide support for installing or running Microsoft Windows software.
© 2009 Apple Inc. All rights reserved. Apple, the Apple logo, AirPort, Boot Camp, FireWire, iSight, Leopard, Mac, MacBook, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license. Intel, Intel Core, and Xeon are trademarks of Intel Corp. in the U.S. and other countries. Mighty Mouse™ & © 2007 CBS Operations Inc. All rights reserved. Other company and product names mentioned herein may be trademarks of their respective companies.
019-1562 2009-10
2
3 Introduction 4 What You Need 4 Installation Overview 4 Step 1: Run Boot Camp Assistant 5 Creating a Partition for Windows 5 If You Have Problems Creating a Partition 6 Step 2: Install Windows 7 Selecting and Formatting the Windows Partition 9 Setting Up Windows 9 If You Have Problems Installing Windows 9 If you get a message saying “Installer Disc Not Found” when you try to install
Windows 9 If the Windows installer isn’t responding 9 If Windows didn’t install properly 9 Step 3: Install the Boot Camp Drivers for Windows 10 If You Have Problems Installing the Device Drivers 11 Starting Up Using Mac OS X or Windows 11 Setting the Default Operating System 12 Selecting an Operating System During Startup 12 If You Have Problems Using Windows on Your Mac 12 For more troubleshooting information 12 If the screen is blank or distorted 12 If you can’t rename the Windows partition 12 n 12 Removing Windows from Your Computer 13 Upgrading 13 If You’re Upgrading from a Previous Version of Boot Camp 13 Upgrading Windows XP to Windows Vista 14 Learning More, Support, and Feedback
Contents
3
Setting Up Boot Camp
This document shows you how to install and set up Boot
Camp so you can use Microsoft Windows on an Intel-based
Mac computer.
Introduction
NOTICE: Make sure to back up all of your data before using Boot Camp, and regularly back up data while using the software.
Boot Camp lets you install Windows on a Mac computer, using a Microsoft Windows installation disc that you provide. Windows is installed on its own partition. After installation, you can use either Windows or Mac OS X on your Mac.
The Boot Camp Assistant application helps you create the Windows partition and restart your Mac using your Windows installation disc. Then you follow these instructions to install Windows and install software drivers that let Windows work with your Mac hardware.
Important: Before you use Boot Camp Assistant, print this document. It contains information you’ll need while installing Windows.
4
What You Need A Mac computer with:
A USB keyboard and mouse, or a built-in keyboard and trackpad
Mac OS X version 10.6 or later (the latest version of Mac OS X is strongly recommended)
At least 10 GB of free space on an internal disk
A built-in optical disc drive or a compatible external optical drive
For information on using your computer with an external optical drive, see the documentation that came with your computer.
A Mac OS X version 10.6 installation disc
One of the following:
Windows XP Home Edition or Professional with Service Pack 2 or later
Windows Vista Home Basic, Home Premium, Business, or Ultimate
Important: You must use a single full-install Windows installation disc (Service Pack 2 is required for Windows XP installations). Do not use an upgrade version of Windows and do not install an earlier version of Windows XP and attempt to update it later to SP2 or later. Use only 32-bit versions of Windows. If you have a Mac Pro or a MacBook Pro introduced in early 2008 or later, you can use a 64-bit version of Windows Vista.
Installation Overview
Installing Windows on your Mac computer involves the following steps:
Step 1: Run Boot Camp Assistant. Boot Camp Assistant creates a partition for Windows and starts the Windows installer.
Step 2: Install Windows.
Step 3: Install the Boot Camp drivers on your Windows volume.
Important: Before you begin, make sure you have a backup of the important information on your computer.
Step 1: Run Boot Camp Assistant
Boot Camp Assistant helps you create a new partition for Windows and gets you started with the Windows installation.
Important: If you are using a portable computer, connect the power adapter before continuing.
5
To use Boot Camp Assistant: 1 Log in to an administrator account on your computer, quit all open applications, and
log out any other users on your computer.
2
Install all available updates. If your computer restarts after installing an update, choose
3 Open Boot Camp Assistant (in the Utilities folder in the Applications folder).
Creating a Partition for Windows Boot Camp Assistant lets you choose the size for your Windows partition, and then creates that partition on your internal disk drive without erasing any data.
Note: If your computer has more than one internal disk and you want to install Boot
numbered bays. You can reinstall the drives after you install Boot Camp.
Refer to your Windows installer documentation to help you determine the best partition size for your system. Windows Vista requires more disk space than Windows XP.
If you’re installing Windows XP and your Windows partition can be 32 GB or smaller, you can choose between two formats for that partition. You’ll select the format in a later step, but you must decide on a format now so you can choose an appropriate size. Here are the two formats:
to the Windows volume from Mac OS X. This partition can be any size.
Windows volume from Mac OS X. This partition must be 32 GB or smaller.
If you’re installing Windows Vista, the Windows partition must use the NTFS format.
If You Have Problems Creating a Partition If you have problems creating a Windows partition, check the following:
The disk must be a single partition, formatted as a Mac OS Extended (Journaled). If the disk already has more than one partition, you must repartition it.
The disk must be an internal disk. You cannot use Boot Camp Assistant to install Windows on an external disk.
6
failed,” try repairing the disk using Disk Utility and running Boot Camp Assistant again. If that doesn’t work, back up all the information on your computer, start up from your Mac OS X installation disc, and erase the disk using Disk Utility. Restore the information to your computer from the backup and try running Boot Camp Assistant again.
Step 2: Install Windows
Read and follow these instructions for installing Windows on your Mac computer. Refer to your Windows documentation for general information about installing and setting up Windows.
To install Windows on your Mac computer: 1 If you already quit Boot Camp Assistant without installing Windows:
a Open Boot Camp Assistant.
b Select “Start the Windows installer.”
c Click Continue.
3 In Boot Camp Assistant, click Start Installation.
4 Your computer starts up from the Windows installation disc. Follow the onscreen instructions. Refer to the following sections for more information.
Selecting and Formatting the Windows Partition It’s important to select the correct partition when installing Windows so that you don’t overwrite Mac OS X on your computer. You’ll then choose the correct format.
NOTICE: Do not create or delete a partition, or select any partition other than as noted below. Doing so may delete the entire contents of your Mac OS X partition.
7
To select and format the correct partition for Windows Vista: 1 Select “Disk 0 Partition 3 BOOTCAMP.”
2 Click “Drive options (advanced).”
3 Click Format, and then click OK.
4 Click Next.
8 SectionTitle
To select and format the correct partition for Windows XP: 1
2 Select an NTFS or FAT format:
to the Windows volume from Mac OS X.
Windows volume from Mac OS X. This option is available only if the Windows partition is 32 GB or smaller.
Important:
9
Setting Up Windows After you install the Windows software, your computer automatically restarts using
If You Have Problems Installing Windows If you have problems installing Windows, try the following solutions.
If you get a message saying “Installer Disc Not Found” when you try to install Windows Make sure you’re logged in to Mac OS X as an administrator.
If the Windows installer isn’t responding Be sure you are using the original keyboard and mouse that came with your computer.
If you’re using an Apple Mighty Mouse, the Windows installer may not respond if the mouse is connected directly to your computer. Connect the Mighty Mouse to the USB port on your keyboard.
If Windows didn’t install properly Verify that you are using an original, full version of Windows XP Home Edition or Professional with Service Pack 2 or later, or Windows Vista Home Basic, Home Premium, Business, or Ultimate. Media Center, OEM, and upgrade versions of Windows XP are not recommended.
Restart your computer and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc. Select the Windows installation disc icon and then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Step 3: Install the Boot Camp Drivers for Windows
Windows using your Mac OS X installation disc.
The Mac OS X disc installs drivers to support Mac components, including AirPort, built- in iSight camera, the Apple Remote, the trackpad on a portable Mac, and the function keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and the Apple Boot Camp system tray item.
10
To install the Boot Camp drivers: 1 Eject the Windows installation disc.
2 Insert the Mac OS X disc.
If the installer doesn’t start automatically, browse the disc using Windows Explorer
3 Follow the onscreen instructions.
If a message appears that says the software you are installing has not passed Windows Logo testing, click Continue Anyway.
If nothing appears to be happening, there may be a hidden window that you must respond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
Note: Periodically, Apple may provide updated Boot Camp drivers, which you can download and install using Apple Software Update. To check for updated drivers manually, go to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers: 1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorer
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you are installing has not passed Windows Logo testing, click Continue Anyway.
if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
11
2 Quit AutoRun if it opens.
3 Using Windows Explorer, locate the driver that you want to reinstall.
4 Open the driver to start the installation.
Starting Up Using Mac OS X or Windows
Once you’ve installed Windows and the Boot Camp drivers, you can start using Windows on your Mac. Boot Camp makes it easy to start up your computer using either Mac OS X or Windows. You can set the default operating system for your computer using Startup Disk preferences (Mac OS X) or the Boot Camp control panel (Windows). You can also select an operating system as your computer is starting up.
Setting the Default Operating System You can use the Startup Disk pane of System Preferences in Mac OS X to set the default operating system for starting up your computer. Boot Camp also installs a Boot Camp control panel that lets you set the default operating system when you’re using Windows.
To set the default operating system in Mac OS X: 1
3 Select the startup disk with the operating system you want to use by default.
4 If you want to start up that operating system now, click Restart.
To set the default operating system in Windows: 1 In Windows, click the Boot Camp icon in the system tray and choose Boot Camp
Control Panel.
Note:
2 Select the startup disk with the operating system you want to use by default.
3 If you want to start up that operating system now, click Restart.
To restart in Mac OS X using the Boot Camp icon in the system tray:
In Windows, click the Boot Camp icon in the system tray and choose “Restart in Mac OS X."
This also sets the default operating system to Mac OS X.
12
Selecting an Operating System During Startup You can select which operating system to use during startup by holding down the Option key. This displays icons for all available startup disks, and lets you override the default setting for the startup disk in Startup Disk preferences (Mac OS X) or the Boot Camp control panel (Windows) without changing that setting.
To select an operating system during startup: 1 Restart your computer and hold down the Option key until disk icons appear
onscreen.
2 Select the startup disk with the operating system you want to use, and then click the arrow beneath the icon.
If You Have Problems Using Windows on Your Mac If you’re having trouble using Windows on your Mac, try the following solutions.
For more troubleshooting information Go to www.apple.com/support/bootcamp.
If the screen is blank or distorted Some graphics cards may not work with both Mac OS X and Windows on a Mac computer. If you’re having trouble with your screen display when using Windows, try the following:
Use the graphics card that came with your Mac.
Make sure you’ve installed the Boot Camp drivers. See “Step 3: Install the Boot Camp Drivers for Windows” on page 9.
Adjust the screen resolution setting in the Display control panel.
If you can’t rename the Windows partition You can rename the Windows partition only in Windows. Start up in Windows and right-click the C: drive in Windows Explorer. Then type a name.
www.apple.com/support/bootcamp and search for “RAID.”
Removing Windows from Your Computer
How you remove Windows from your computer depends on whether you installed Windows on a single-volume disk or on a second disk partition.
If you installed Windows on a second disk partition: Using Boot Camp Assistant as described below, remove Windows by deleting the Windows partition and restoring the disk to a single-partition Mac OS X volume.
13
If your computer has multiple disks and you installed Windows on a disk that has only one partition: Start up in Mac OS X and use Disk Utility (in the Utilities folder in the Applications folder), to erase the disk and reformat it as a Mac OS X volume.
To delete Windows and the Windows partition: 1 Start up in Mac OS X.
2 Quit all open applications and log out any other users on your computer.
3 Open Boot Camp Assistant.
4 Select “Create or remove a Windows partition” and click Continue.
5 Do one of the following:
If your computer has a single internal disk, click Restore.
If your computer has multiple internal disks, select the disk with Windows on it, and then select “Restore to a single Mac OS partition” and click Continue.
Upgrading
These sections describe how to upgrade Windows or your version of Boot Camp.
If You’re Upgrading from a Previous Version of Boot Camp If you’ve already installed Windows on this computer with a previous version of Boot Camp Assistant, you just need to install the updated Mac drivers for Windows.
Important: If you’ve customized your Windows environment, write down your settings before updating the drivers.
To install the updated Mac drivers for Windows: 1 Restart your Mac using Windows.
2 Insert your Mac OS X version 10.6 installation disc.
If the installer doesn’t start automatically, browse the disc using Windows Explorer and
3 Click Repair.
Upgrading Windows XP to Windows Vista You can upgrade Windows XP to Windows Vista using a licensed copy of Windows Vista Home Basic, Home Premium, Business, or Ultimate. After upgrading to Windows Vista, you must reinstall the Boot Camp drivers.
To upgrade Windows XP to Windows Vista: 1 Restart your Mac using Windows.
2 Insert your Windows Vista installation or upgrade disc.
3 Follow the instructions that came with Windows Vista.
4 After completing the Windows Vista upgrade, insert your Mac OS X installation disc.
If the installer doesn’t start automatically, browse the disc using Windows Explorer and
Learning More, Support, and Feedback
For more information about Boot Camp, go to www.apple.com/bootcamp.
For Boot Camp support, go to www.apple.com/support/bootcamp.
Apple welcomes your feedback on Boot Camp. To submit feedback, go to www.apple.com/macosx/feedback.
Apple does not provide support for installing or running Microsoft Windows software.
© 2009 Apple Inc. All rights reserved. Apple, the Apple logo, AirPort, Boot Camp, FireWire, iSight, Leopard, Mac, MacBook, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple Inc. is under license. Intel, Intel Core, and Xeon are trademarks of Intel Corp. in the U.S. and other countries. Mighty Mouse™ & © 2007 CBS Operations Inc. All rights reserved. Other company and product names mentioned herein may be trademarks of their respective companies.
019-1562 2009-10
Related Documents
