Advanced Technologies: Patented all-digital amplifier operating at 350 kHz provides high power levels with extremely low distortion. State-of-the-art digital processing circuits render pristine sound quality. Advanced limiter algorithms provide precise system control without harming sound quality at even the most aggressive levels. Universal AC voltage compatibility. Power Amplifiers and Processor: Dual amplifiers, one per driver , with 2400W total music power Driver Complement: Dual Apogee 18"( 460mm) permanent magnet cone-type drivers are treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treated with Ferrofluid ® for greater power handling capability, lower distortion, and control of short- term impedance rise Handles: Four handles designed as an integral part of the enclosure (no moving parts ) Grille: Powder-coated, diamond-punched steel with acoustic foam covering Trim: Optional protective steel pieces on top and bottom edges; powder- coated for durability Rigging Hardware: Four 12 gauge steel nutplates, mounted two on each side, recessed so as to be nominally flush; accepts 3/8"-16 thread, nutplates are backed with 12 gauge steel internal brackets ( 10mm nutplate or Aeroquip™ Pan fittings optional) Enclosure Type: Rectangular, optimally-vented bass Cabinet Construction: Multi-ply birch with stainless steel fasteners Warranty: Three ( 3 ) years, limited Self-Powered Concert Subwoofer System Electronics Specifications: Engineering Dat a: Description: Format: Self-contained dual power amplifiers with integrated processing electronics Dispersion: Omni-directional Frequency Response (1m on axis): 32 Hz to 100 Hz ± 3 dB Max. SPL (@1m): 134 dB cont./140 dB peak Dimensions: 44.75"( 1137mm) W x 30"( 762mm) H x 22.5"( 572mm) D Weight: 214 lb. ( 97 kg) Input: XLR connectors, active balanced 35k ohms Loop-through Output: Daisy-chain audio signal, XLR type connector Amplifier Power: 2400W total music power, dual amplifiers RMS Limiter: 100 ms long duration protection Peak Limiter: 3 to 5 ms fast-acting transient protection Cooling: Passive using external heat sinks Voltage: 115V AC or 230V AC selection switch, Neutrik Powercon™ AC inlet with loop-through; power cable included The APL-12 self-powered subwoofer incorporates internal amplifiers and intelligent, front-end signal processing into a robust enclosure designed for concert touring, AV presentations, and fixed installations. The dual cone drivers provide powerful, deep bass with rapid transients for a crisp, clean, and accurate sonic image. APL-12
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
8/8/2019 Apl12 Spec Subwoofer
http://slidepdf.com/reader/full/apl12-spec-subwoofer 1/2
Advanced Technologies:Patented all-digital amplifier operating at 350 kHz provides highpower levels with extremely low distortion. State-of-the-art digitalprocessing circuits render pristine sound quality. Advanced limiteralgorithms provide precise system control without harming soundquality at even the most aggressive levels. Universal AC voltagecompatibility.Power Amplifiers and Processor:Dual amplifiers, one per driver, with 2400 W total music power
Driver Complement:Dual Apogee 18 "( 460 mm) permanent magnet cone-type drivers aretreated with a waterproofing compound, providing resistance tomoisture, and enabling long-term stability of cone resonance and
cone mass parameters; also treated with Ferrofluid ® for greaterpower handling capability, lower distortion, and control of short-term impedance rise
Handles:Four handles designed as an integral part of the enclosure(no moving parts )
Grille:Powder-coated, diamond-punched steel with acoustic foam covering
Trim:Optional protective steel pieces on top and bottom edges; powder-coated for durability
Rigging Hardware:Four 12 gauge steel nutplates, mounted two on each side, recessed
so as to be nominally flush; accepts 3/8 "-16 thread, nutplates arebacked with 12 gauge steel internal brackets ( 10 mm nutplate orAeroquip™ Pan fittings optional)
Enclosure Type:Rectangular, optimally-vented bass
Cabinet Construction:Multi-ply birch with stainless steel fasteners
Warranty:Three ( 3 ) years, limited
Self-Powered Concert Subwoofer System
Electronics Specifications:
Engineering Data:
Description:
Format:Self-contained dual power amplifiers withintegrated processing electronicsDispersion:Omni-directionalFrequency Response (1m on axis):32 Hz to 100 Hz ±3 dBMax. SPL (@1m):134 dB cont./ 140 dB peakDimensions:44.75 "( 1137 mm) W x 30 "( 762 mm) H x 22.5 "( 572 mm) DWeight:214 lb. ( 97 kg)
Input:XLR connectors, active balanced 35 k ohmsLoop-through Output:Daisy-chain audio signal, XLR type connector Amplifier Power:2400 W total music power, dual amplifiersRMS Limiter:100 ms long duration protectionPeak Limiter:3 to 5 ms fast-acting transient protectionCooling:
Passive using external heat sinks Voltage:115 V AC or230 V AC selection switch, NeutrikPowercon™ AC inlet with loop-through; powercable included
The APL-12 self-powered subwooferincorporates internal amplifiers andintelligent, front-end signal processing into arobust enclosure designed for concerttouring, AV presentations, and fixedinstallations. The dual cone drivers providepowerful, deep bass with rapid transients fora crisp, clean, and accurate sonic image.
APL-12
8/8/2019 Apl12 Spec Subwoofer
http://slidepdf.com/reader/full/apl12-spec-subwoofer 2/2
POWER
ON
50/60HZ
NEUTRIK NAC3FCA 12A MAXIMUMPOWER OUTLETPOWERCON
5A 230VAC10A 115VAC
USE SAME TYPE115V
0°30°
60°
90°
120°
150°180°
210°
240°
270°
300°
330°0°
30°
60°
90°
120°
150°180°
210°
240°
270°
300°
330°
0°30°
60°
90°
120°
150°180°
210°
240°
270°
300°
330°0°
30°
60°
90°
120°
150°180°
210°
240°
270°
300°
330°
31.5 Hz 63 Hz
125 Hz 250 Hz
©200 1 Bogen Communications, Inc 08/02Specifications subject to change without notice. 55-0042-01B
Measured in a free-field anechoic environment using a swept one-third octave input.All polar measurements ob tained in a free-field environment at 10 ° increments.
Polar Measurements (6 dB/division, normalized)
Line AC Panel
Dimensional Drawings
Frequency Response ( 10 dB/division)
Power Switch
Main AC Protection Fuse
AC Input Connector, Neutrik Powercon NAC3FCA
AC Line Voltage Selection Switch
50 Spring Street, Ramsey, NJ 07446, USATel: 800-443-3979 • Fax: 800-999-9016 • www.apogee-sound.com
1
2
3
4
5431 2
AC Output Connector, Neutrik Powercon NAC3FCB5
Audio Input Panel
1
2
3
4
5
6
7
8
9
Signal Presence Indicator
System Protection Indicator
Amplifier Clip Indicator
System Power Indicator
1
2
3
4
Volume Control5
Ch 2 Mute Switch
Ch 1 Mute Switch
Balanced Line Audio Input, XLR
Balanced Line Audio Loop-through, XLR
6
7
8
9
PROT
PWR
CLIP
SIGNAL
36
6
16
INPUTMUTE
MUTE
OUTPUT
28
12 oo
40
-dB VOLUME
24
10
CH 2
CH 1
LOOPING
Related Documents
