2
The American Petroleum Institute (API) is acknowledged worldwide as the primary source of information and technical standards for the oil and gas industry. Companies look to API to provide the critical information that personnel need to operate and maintain a variety of industrial operations safely and efficiently.
API-U was created to meet the training challenges of the industrial workforce.
Our growing portfolio of eLearning programs and courses is available 24/7 to give personnel the fundamental knowledge they need, to fill knowledge gaps, and to improve efficiencies by cross-training.
Sixty-six technical courses cover critical topics in the areas of:
Mechanical Maintenance
Electrical Maintenance
Instrumentation and Control
Industrial Math and science
Seventy-six courses, available in three packages, help organizations maximize and sustain the effectiveness of a Lean transformation. These courses address lean learning for oil and gas operations and cover topics in five areas:
Lean Overview
Lean Core Skills
Lean Leadership Skills
Lean Application
Systemic Change
Seventy-two safety courses cover critical topics in the areas of:
US General Industry Safety
US Onshore Oil and Gas Safety
API-U eLearning courses provide a level of detail that’s often lacking in other online offerings that focus on basic knowledge.
Upon successful completion of a course, the user is provided with a personalized certificate from API-U that can be printed directly from your computer.
As an API-U client, your company can take advantage of this current offering and be assured of our commitment to continually add new courses to meet additional challenges in the future.
API-U’s training administration and reporting is handled by GP Strategies’™ Learning Management System (LMS). GP Strategies is a world leader in training and consulting and is the licensed provider of the API-U content. Arrangements can also be made to provide and administer the training through your company’s own LMS.
API-U Benefits
Advance with the only online training authorized by the American Petroleum Institute.
Reduce training costs per employee.
Build a consistent level of technical knowledge for a global workforce.
Easily track individual worker’s training on a global or plant-specific level.
Allow workers to access technical training anytime and anywhere they have access to the Internet or a company’s intranet.
Complement classroom training and other qualification programs.
3
Contents Contents .................................................................................................................................................................................. 3
API-U Courses .......................................................................................................................................................................... 4
Mechanical Maintenance .................................................................................................................................................... 4
Electrical Maintenance ..................................................................................................................................................... 19
Instrumentation and Control ............................................................................................................................................ 26
Industrial Math and Science ............................................................................................................................................. 32
Lean Learning for the Oil and Gas Industry....................................................................................................................... 34
US General Industry Safety ............................................................................................................................................... 55
US Onshore Oil and Gas Safety ......................................................................................................................................... 78
Seguridad - Version en Español ........................................................................................................................................ 85
API-U Programs ..................................................................................................................................................................... 88
All Courses ......................................................................................................................................................................... 88
All Technical Courses......................................................................................................................................................... 88
All Safety Courses .............................................................................................................................................................. 88
Lean Learning for Oil and Gas Operations ........................................................................................................................ 88
Executive Package ......................................................................................................................................................... 88
Manager Package .......................................................................................................................................................... 89
Practitioner Package ..................................................................................................................................................... 89
Program and Courseware Pricing ......................................................................................................................................... 91
4
API-U Courses
Mechanical Maintenance
Title Air Compressor - Fundamentals
Estimated Duration (hours) 2.25
Objective(s) At the completion of this course, the student will be able to describe the basic components and operation of common types of air compressors.
Course Modules Include Compressor Theory and Classifications
Operating Characteristics of Selected Compressors
Matching of Characteristics of Compressors to Applications
Positive Displacement Compressor Components
Air Compressor Intercoolers
Air Compressor Aftercoolers
Compressors With Dryers
Air Compressor Sealing Mediums
Positive Displacement Reciprocating Compressor Components
Title Air Compressor - Maintenance
Estimated Duration (hours) 0.5
Objective(s) At the completion of this course, the student will be able to identify fluid power system problems and remedies; locate various components of a fluid power system; explain the types of repairs made to selected fluid power system components; describe the major steps required in the replacement of parts and components in fluid power systems; and explain basic fluid power system routine maintenance activities.
Course Modules Include Air Compressor Disassembly
Air Compressor Inspections
Replacement of Defective Parts on Air Compressors
Air Compressor Reassembly
5
Title Air Compressors - Positive Displacement - Overhauls
Estimated Duration (hours) 0.5
Objective(s) At the completion of this course, the student will be able to describe the major steps involved in overhauling multi-stage piston air compressors; describe the basic construction and operation of wet and dry screw compressors; and describe the major steps involved in overhauling screw type air compressors.
Course Modules Include Multi-Stage Piston Air Compressor Overhaul
Positive Displacement Screw Compressors - “Wet” or “Dry” Type
Screw-Type Air Compressor Overhaul
Title Bearing Fundamentals
Estimated Duration (hours) 2.5
Objective(s) At the completion of this course, the student will be able to describe bearing types, components, and operating characteristics.
Course Modules Include Loading and Bearing Types
Bearing by Type
Bearing Operating Characteristics
Sliding Surface Bearings
Principles of Rolling Contact Bearings
Bearing Component Matching Type
Identification of Seals Used With Bearings
Use of Seals
Bearing Selections
Title Bearing Lubrication
Estimated Duration (hours) 1.0
Objective(s) At the completion of this course, the student will be able to explain types and uses of lubricants, and describe proper lubrication techniques for various bearings.
Course Modules Include Types and Uses of Lubricants
Lubrication for Sliding and Rolling Surfaces
Identification of Lubrication Characteristics by Bearing Types
Proper Lubrication Techniques
Title Bearing Maintenance
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to describe the major steps in the removal, inspection, repair, replacement, and installation of sliding surface and rolling contact bearings.
Course Modules Include Bearing Disassembly
Removal of Sliding Surface Bearings
Removal of Rolling Contact Bearings
Sliding Surface/Rolling Contact Bearings Inspection
Bearing Inspections
Sliding Surface/Rolling Contact Bearing Repair Procedures
Replacement of Defective Parts
Installation of Siding Surface Bearings
Installation of Rolling Contact Bearings
6
Title Drive Belts
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to identify drive belts used in the plant; describe the use of drive belts; identify sheaves used in the plant; describe the major steps required to perform drive belt adjustments; and describe the major steps required to replace drive belts.
Course Modules Include Drive Belts Used in the Plant
Use of Drive Belts (V-Belts, Gear Belts, Flat Belts)
Sheaves Used in the Plant
Use of Sheaves in the Plant
Drive Belt Adjustments
Drive Belt Replacement
Title Gaskets and O-Rings
Estimated Duration (hours) 0.75
Objective(s) At the completion of this course, the student will be able to describe how to make gaskets and O-rings. In addition, the student will be able to explain how to remove, select, and install O-rings, gaskets, and packing.
Course Modules Include Gasket Creation
O-Ring Creation
O-Ring Selection
Removal of Sealing Mediums
Installation of Sealing Mediums
Title Heat Exchanger Fundamentals
Estimated Duration (hours) 0.5
Objective(s) At the completion of this course, the student will be able to explain the theory of how heat exchangers transfer heat, list common types of heat exchangers, and describe heat exchanger design characteristics.
Course Modules Include Heat Exchanger Theories
Heat Exchanger Types and Characteristics
Title Heat Exchanger Maintenance
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to describe the following; effects of fouling, corrosion, and erosion commonly found in heat exchangers; common techniques used to clean heat exchangers; basic steps used to inspect heat exchangers; steps used in performing common leak tests; and basic steps used to perform repairs.
Course Modules Include Heat Exchanger Fouling, Corrosion, and Erosion
Heat Exchanger Tube Cleaning
Heat Exchanger Inspections
Heat Exchanger Testing
Heat Exchanger Repairs
Removal and Replacement of Heat Exchangers
Gauge Glass Repair
7
Title Hydraulics - Fundamentals
Estimated Duration (hours) 3.25
Objective(s) At the completion of this course, the student will be able to explain the basic principles of hydraulics; describe the major components common to most fluid power systems; and identify common hydraulic component symbols found on a hydraulic fluid flow diagram. In addition, the student will be able to identify fluids and additives used in hydraulic systems and describe their characteristics.
Course Modules Include Incompressibility of Fluids
Basic Components Common to Fluid Power Systems
Fluid Power System Diagramming
Purpose of Actuators
Basic Operations of an Actuator
Fluid Power System Control Valves
Valve Operation in Fluid Power Systems
Purpose of Accumulators
Types of Accumulators
Identification of Fluid Power Pumps
Operating Principles of Fluid Power Pumps
Fluid Power Pump Applications
Identification of Fluid Power Motors
Operating Principles of Fluid Power Motors
Fluid Power Motor Applications
Identification of Fluids and Additives Used in Hydraulic
Systems
Fluid Characteristics
Fluid Applications
Fluid Power System Reservoirs
Purpose of Filters
Hydraulic System Heat Exchangers
Title Hydraulics - Maintenance
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to identify fluid power system problems and remedies; locate various components of a fluid power system; explain the types of repairs made to selected fluid power system components; describe the major steps required in the replacement of parts and components in fluid power systems; and explain basic fluid power system routine maintenance activities.
Course Modules Include Fluid Power System Vendor Manuals
Identification of Fluid Power Component Malfunctions
Fluid Power System Problems and Possible Remedies
Location of Various Components of a Fluid Power System
Types of Repairs Made to Selected Fluid Power
Components
Replacement of Parts and Fluid Power Components
Fluid Power Component Replacement
Fluid Power System Routine Maintenance Activities
Fluid Power Pump System Routine Maintenance
Fluid Power Motor Routine Maintenance
8
Title Machine Shop - Grinders, Saws, and Drills
Estimated Duration (hours) 2.0
Objective(s) At the completion of this course, the student will be able to describe the procedure for dressing and truing a grinding wheel on a pedestal grinder and explain the proper use of a surface grinder. The student will also be able to describe the proper procedure to saw to layout lines using a band saw. In addition, the student will be able to describe the major steps required to drill, countersink, counterbore, spotface, ream, and tap holes on a drill press; and identify tap types and the different classifications of threads used for fasteners.
Course Modules Include Grinding Wheel Dressing and Truing
Grinding of Parts Parallel and to Size
Procedure to Saw to Layout Lines on Band Saw
Procedure to Drill Holes to Layout Lines
Selection of Correct Speed to Drill Size and Material
Procedure to Drill Holes Through the Center of Round Stock
Procedure to Countersink, Counterbore, and Spotface on a Drill Press
Procedure to Ream Holes to Size on a Drill Press
Tap Types and Thread Classifications
Procedure to Tap Holes Using a Drill Press
9
Title Machine Shop - Lathes
Estimated Duration (hours) 6.25
Objective(s) At the completion of this course, the student will be able to explain the function and proper use of the basic components of an engine lathe and its controls. The student will also be able to describe the steps required to perform precision centering work; face the end surfaces and shoulders of a work specimen; perform drilling in a lathe; carry out straight and taper turning; cut steep tapers and chamfers; perform radius and fillet turning; mount, face, and turn work on a mandrel; execute machine reaming; do parting and grooving; perform boring operations; knurl a work piece; cut internal and external unified standard screw threads; straighten a shaft; and grind radius, turning, facing, form, and threading tools.
Course Modules Include Operator Control of Engine Lathe
Use of a Steady Rest
Remove and Install Chucks and Face Plates With Cam Locks
Precision Centering Work in a 4-Jaw Chuck
Facing in a Chuck
Drilling on a Lathe
Alignment of Lathe Centers
Mount Workpieces Between Centers
Center Drill Work Between Centers
Straight Turning Between Centers
Straight Turning Work Held in a Chuck on an Engine Lathe
Taper Turning With the Tailstock Off-Set Method
Cutting Steep Tapers and Chamfers
Taper Turning on a Lathe With a Taper Attachment
Radius and Fillet Turning
Mount, Face, and Turn Work on a Mandrel
Machine Reaming on a Lathe
Parting and Grooving on a Lathe
Boring on a Lathe
Knurling of a Workpiece
Cutt External Unified Standard Screw Threads
Cut Internal Unified Standard Screw Threads
Straighten a Shaft
Grind a Right-Hand Turning Tool
Grind a Right-Hand Facing Tool
Grind a Radius Tool
Grind a Round Nose Form Tool
Grind a 60-Degree Threading Tool
Reverse the Jaws in a 4-Jaw Independent Chuck
Change the Jaws in a 3-Jaw Universal Chuck
Reverse the Jaws in a 3-Jaw Universal Chuck With Cap
Screw-Mounted Jaws
10
Title Machine Shop - Layout/Bench Work
Estimated Duration (hours) 2.0
Objective(s) At the completion of this course, the student will be able to perform a rough and a precision layout of a workpiece. The student will also be able to describe the following: how to saw stock with a hand hacksaw; the correct procedure for straight and draw filling of metal; how to size holes with a hand reamer; and hand methods of deburring parts, removing broken studs, tapping threads, and cutting threads using a threading die and tap. In addition, the student will be able to describe the following: how to cut threads by machine using a threading die; the procedure for broaching a keyway using an arbor press; and how to operate a powered keyway cutter.
Course Modules Include Rough Layout of a Workpiece
Precision Layout of a Workpiece
Stock Sawing With a Hand Hacksaw
Straight and Draw Filing of Metal
Hole Sizing With Hand Reams
Hand Methods of Deburring Parts
Hand Methods of Removing Broken Studs
Tapping Threads by Hand
Cutting Threads by Hand Using a Threading Die and Tap
Cutting Threads by Machine Using a Threading Die
Broaching of a Keyway Using an Arbor Press
Operate a Powered Keyway Cutter
Title Machine Shop - Vertical Milling Machines
Estimated Duration (hours) 3.0
Objective(s) At the completion of this course, the student will be able to describe the basic components, controls, and operation of a vertical milling machine. The student will be able to describe the following: the steps required to locate, drill, bore, and ream holes using the coordinated method; step drill holes accurately; mill a slot or pocket; countersink, counterbore, and spotface workpieces; mill a square and hexagon on a workpiece; machine a flat surface using a flying cutter; mill multi-level surfaces; and mill a fillet with a ball end mill.
Course Modules Include Vertical Milling Operations Control Familiarity
Install and Remove a Collet and End Mill
Align Spindle Perpendicular to the Table
Mount and Align a Vise on the Mill Table
Square a Workpiece Clamped to the Mill Table
Square a Workpiece Held in a Vise on a Vertical Mill
Locating, Drilling, and Reaming Holes by Coordinated Method
Locate and Bore Holes - Coordinated Method
Step Drill Holes Accurately to Size
Mill a Slot or a Pocket
Countersinking, Counterboring, and Spotfacing
Mill a Square on a Workpiece
Mill a Hexagon on a Workpiece
Machine a Flat Surface Using a Flying Cutter
Mill Multi-Level Surfaces
Mill a Fillet With Ball End Mill
11
Title Oil Analysis
Estimated Duration (hours) 0.5
Objective(s) At the completion of this course, the student will be able to explain the basic principles of lubrication, including oil and grease characteristics, lubricant additives, lubricant selection, and lubricant storage and handling. The student will also be able to explain the fundamentals of lubrication sampling and the basic methods of maintaining oil and grease lubricated systems. In addition, the student will be able to: describe general lubricant problems and explain the basic principles of lubricant testing and analysis
Course Modules Include Fundamentals of Lubrication
Lubrication Sampling Fundamentals
Maintenance, Purification, and Filtration of Oil and Grease Lubricated Systems
Failure Mode Indicators
Lubricant Testing and Analysis
Title Piping
Estimated Duration (hours) 2.0
Objective(s) At the completion of this course, the student will be able to identify and describe various pipe fittings, common pipe joining methods, and different types of pipe hangers and support systems. Students will also be able to identify piping symbols on piping and instrumentation drawings.
Course Modules Include Fittings
Pipe Joining Methods
Pipe Joining Methods Explained
Use of Pipe Fittings
Pipe Hangers and Support Systems
Pipe Hangers and Support System Operations
Erecting Piping Runs
Piping and Instrumentation Drawing Symbols
Interpretation of Piping and Instrumentation Drawings
Piping Symbols
12
Title Precision Measurement
Estimated Duration (hours) 3.25
Objective(s) At the completion of this course, the student will be able to describe how to use the following measurement tools: steel rules, protractors, outside micrometers, inside micrometers, telescoping gauges, depth rules, depth micrometers, hole gauges, Vernier calipers, dial indicators, dial calipers, radius gauges, thickness gauges, taper gauges, wire gauges, sheet metal gauges, screw pitch gauges, thread micrometers, and go/no go gauges.
Course Modules Include Measuring Device Orientation
Fractional Inch Graduation - Steel Rule
Measurement With Protractors
Outside Thimble Micrometer Ratchet Use
Micrometer “Zero” Calibration
Outside Micrometer Measurements
Measuring With an Inside Micrometer
Measuring With a Telescoping Gauge
Measuring With a Depth Rule and a Depth Micrometer
Measuring With a Small Hole Gauge
Error in Transferring Measurements
Precision Measuring “Feel”
Vernier Scale Reading
Measuring With Vernier Caliper
Measuring With a Dial Indicator
Checking Concentricity
Measuring With a Dial Caliper
Measuring With a Radius Gauge
Measuring With a Thickness Gauge and a Taper Gauge
Measurement With Wire and Sheet Metal Gauges
Measuring With a Screw Pitch Gauge and a Thread Micrometer
Using a Go/No Go Gauge
Title Pumps - Centrifugal - Fundamentals
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to describe basic centrifugal pump components and operation, including performance issues pertaining to centrifugal pumps.
Course Modules Include Centrifugal Pump Theories
Centrifugal Pump Components
Identification of Sealing Medium Used Pumps
Performance Issues in Centrifugal Pumps
Cavitation in Centrifugal Pumps
13
Title Pumps - Centrifugal - Maintenance
Estimated Duration (hours) 0.75
Objective(s) At the completion of this course, the student will be able to describe the major steps required to disassemble, inspect, and reassemble centrifugal pumps.
Course Modules Include Centrifugal Pump Disassembly
Centrifugal Pump Inspection
Identification of Defective Parts in Centrifugal Pumps
Centrifugal Pump Reassembly
Title Pumps - Centrifugal - Overhauls
Estimated Duration (hours) 1.0
Objective(s) At the completion of this course, the student will be able to describe the major steps required to overhaul horizontal, single-stage, centrifugal pumps; horizontal, multi-stage, centrifugal pumps; vertical, single-stage, centrifugal pumps; and vertical, multi-stage, centrifugal pumps.
Course Modules Include Horizontal, Single-Stage, Centrifugal Pump Overhaul
Horizontal, Multi-Stage, Centrifugal Pump Overhaul
Vertical, Single-Stage, Centrifugal Pump Overhaul
Vertical, Multi-Stage, Centrifugal Pump Overhaul
Title Pumps - Positive Displacement - Fundamentals
Estimated Duration (hours) 0.75
Objective(s) At the completion of this course, the student will be able to explain the basic theory of operation of centrifugal and positive displacement pumps; list the major safety devices associated with positive displacement pumps; and list common applications for positive displacement pumps.
Course Modules Include Pump Theories and Differences
Types of Safety Devices Used for Positive Displacement Pumps
Positive Displacement Pump Applications
14
Title Pumps - Positive Displacement - Overhauls
Estimated Duration (hours) 2.0
Objective(s) At the completion of this course, the student will be able
to describe the major steps involved in disassembling,
inspecting, and reassembling screw-type positive
displacement pumps and identify parts that are
commonly replaced. The student will also be able to
describe the major steps involved in overhauling gear,
piston, diaphragm, lobe, vane, and liquid ring pumps.
Course Modules Include Positive Displacement Pump Disassembly (Screw Pump)
Visual Inspection of Positive Displacement Pumps (Screw Pump)
Defective Part Replacement (Screw Pump)
Positive Displacement Pump Reassembly (Screw Pump)
Overhaul a Positive Displacement Pump (Gear Pump)
Piston Pump Overhaul
Diaphragm Pump Overhaul
Lobe Pump Overhaul
Vane Pump Overhaul to Criteria in Manuals
Liquid Ring Pump Overhaul
Shaft and Pumping Element Repair
Title Rigging and Lifting Practices
Estimated Duration (hours) 2.75
Objective(s) At the completion of this course, the student will be able to describe common types of rigging and lifting equipment, and explain how to use the equipment safely. In addition to rigging equipment, the following are covered: manual lifting devices, electric-powered lifting devices, air-operated lifting devices, hydraulic lifting devices, mobile cranes, and boom trucks.
Course Modules Include Proper Use of Riggers Handbook
Types of Rigging and Lifting Equipment
Inspecting the Rigging Equipment
Safe Working Loads for Various Types of Slings and Hardware
Planning a Rigging and Lifting Job
Proper Use of Rigging and Lifting Equipment
Safe Performance of Lifts Using Manually Operated Lifting Devices
Safe Performance of Lifts Using Electric-Powered Lifting Devices
Safe Performance of Lifts With Air-Operated Lifting Devices
Safe Performance of Lifts With Hydraulic Lifting Devices
Safe Performance of Lifts With a Mobile Crane
Safe Movement of Materials/Equipment With a Mobile Crane
Safe Performance of Lifts With a Boom Truck
Safe Movement of Materials/Equipment With a Boom Truck
Safe Usage of Personal Lifting Devices
15
Title Scaffolds
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to describe the most common types of scaffolds; describe the proper and safe use of scaffolding; and explain the major steps required to assemble and disassemble scaffolding and stays.
Course Modules Include Scaffolding Terminology
Types of Scaffolds
Proper and Safe Usage of Scaffolding
Selection of Scaffolding Components for Their Correct Usage
Scaffolding and Stay Assembly
Scaffolding and Stay Disassembly
Title Shaft Alignment - Laser Aided
Estimated Duration (hours) 0.5
Objective(s) At the completion of this course, the student will be able to describe the major types and functions of couplings; explain the basic terminology and principles of shaft alignment; and describe soft foot, the conditions that can cause it, and how to correct soft foot using a laser-based alignment system. In addition, the student will be able to explain the operation of a laser-based alignment system and how to troubleshoot some laser alignment problems.
Course Modules Include The Function of Couplings and Major Coupling Types
Shaft Alignment
Identifying and Correcting Soft Foot
Laser Alignment Safety and System Operating Information
Shaft Alignment Using Laser-Based Systems
Laser Alignment Troubleshooting
Title Tools
Estimated Duration (hours) 2.75
Objective(s) At the completion of this course, the student will be able to identify common types of hand and power tools, and describe safety precautions associated with them. The student will also be able to identify common types of measuring tools and describe their uses. In addition, the student will be able to identify common types of fasteners, describe basic specification issues, and explain basic fastener usage and safety considerations.
Course Modules Include Non-Powered Hand Tools - Part 1
Non-Powered Hand Tools - Part 2
Power Tools
Measuring Tools
Fasteners
16
Title Valve Fundamentals
Estimated Duration (hours) 2.0
Objective(s) At the completion of this course, the student will be able to describe the major types of valves used in plants, their components, and their operating characteristics.
Course Modules Include Valve Theory
Valve Types and Characteristics
Components of Selected Valves
Operation Characteristics of Selected Valves
Characteristics of Valves to Applications
Sealing Mediums Used in Valves
Title Valve Maintenance
Estimated Duration (hours) 2.0
Objective(s) At the completion of this course, the student will be able to describe the major steps required in repairing valves and the basic steps in overhauling globe, gate, safety, relief, ball, plug, diaphragm, butterfly, check, and control valves.
Course Modules Include Valve Part and Component Repair
Globe Valve Overhaul
Gate Valve Overhaul
Safety Valve Overhaul
Relief Valve Overhaul
Ball Valve Overhaul
Plug Valve Overhaul
Diaphragm Valve Overhaul
Butterfly Valve Overhaul
Check Valve Overhaul
Control Valve Overhaul
17
Title Welding - Arc
Estimated Duration (hours) 5.0
Objective(s) At the completion of this course, the student will be able to explain how to perform shielded metal arc welding on carbon steel plate and carbon steel pipe. The student will also be able to explain what the various welding positions are, their orientations, and the processes for welding in various positions. In addition, the student will be able to explain the proper usage of polarities (direct current power) and current flow in electric arc welding with covered electrodes; demonstrate the setup of electric arc welding equipment for shielded metal arc welding (SMAW) in both polarities on steel plate; match electric arc welding filler metals to their application positions; and explain the setup of gas tungsten arc welding equipment for straight polarity welding with argon shielding gas.
Course Modules Include Setup of Electric Arc Welding Equipment for SMAW in Both Polarities on Steel Plate
Electric Arc Welding Process for Welding in Various Positions
Welding Positions and Their Orientations
Electric Arc Welding Filler Metal Selection Based on Positions
Matching of Electric Arc Welding Filler Metals to Their Application Positions
Electric Arc Welding Process for Welding in the Flat Position
Usage of Polarities (Direct Current Power) and Current Flow in Electric Arc Welding With Covered Electrodes
Selection of Electric Arc Filler Metals Based on Application and Positions
SMAW on Carbon Steel Plate to A.W.S. - BU - 2A Prequalified Joint Weld Procedures
Electric Arc Welding Filler Metal Selection Based on the Flat Position
Matching of Electric Arc Welding Filler Metal Application to Flat Position
Welding Positions and Their Orientations for Pipe Welding
SMAW on Carbon Steel Pipe
Setup of Pipe Coupons for SMAW in the 2G, 5G, and 6G Fixed Pipe Positions
Fitup Procedure for Chill Rings on Selected Size Pipes
Fitup of Chill Rings on Various Pipe Sizes
Differences Between Mild Carbon Steel Filler Metals and Stainless Steel Filler Metals
Differences in Weldability Between Carbon Steel and Stainless Steel
Explain the Setup of Gas Tungsten Arc Welding (GTAW) Equipment for Straight Polarity Welding With Argon Shielding Gas
Demonstrate Setup of GTAW Equipment for Straight Polarity Welding With Argon Shielding Gas
Joint Fitup Procedure for Welding Proper Size GTAW Root Pass on Pipe
Proper Joint Fitup Procedure for Welding GTAW Root Pass on Pipe
Argon Backing Gas Purge Systems for Root Protection Against “Sugaring” Pipe
GTAW on Carbon Steel Tube With Stainless Steel Filler
Shielded Metal Arc Welding on Carbon Steel Pipe With GTAW Root
Shielded Metal Arc Welding on Carbon Steel Tube, GTAW for Root With Carbon Steel Filler
18
Title Welding - Oxyacetylene
Estimated Duration (hours) 4.25
Objective(s) At the completion of this course, the student will be able to explain the proper setup for oxyacetylene cutting equipment, demonstrate safe usage of oxyacetylene cutting equipment, and explain how to perform oxyacetylene cutting. The student will also be able to describe how to match filler metal requirements to base metals for fusion welding, and explain how to perform oxyacetylene fusion welding on carbon steel. In addition, the student will also be able to explain how to perform oxyacetylene brazing on various metal alloys, and describe how to braze weld various joint configurations.
Course Modules Include Proper Setup for Oxyacetylene Cutting Equipment
Safe Usage of Oxyacetylene Cutting Equipment
Oxyacetylene Cutting
Proper Flame Settings in Relation to Welding Tip Size and Material Thickness
Selection of Cutting Tip Size for Fuel Pressures and Material Thickness to Obtain a Neutral Flame
Matching of Filler Metal Requirements to Base Metals for Fusion Welding
Matching of Proper Filler Metals to Base Metals
Proper Setting of Oxyacetylene Flame for Fusion Welding
Oxyacetylene Fusion Welding on Carbon Steel
Flame Setting for Oxyacetylene Brazing for Various Silver Alloy Fillers
Reducing/Carburizing of the Flame for Brazing Various Metal Alloys
Matching of Filler Metals for Brazing to Various Types of Base Metals
Matching of Proper Filler Metals to Base Metals to Achieve Strength and Integrity
Oxyacetylene Brazing on Various Metal Alloys
Proper Flame Setting for Braze Welding Various Thicknesses of Carbon Steel and Cast Iron
Braze Welding of Various Joint Configurations
Proper Braze Welding of Various Bead Configurations
Braze Welding of Various Base Metal Types
Matching of Braze Welding Filler Metals With Various Base Metals
Oxyacetylene Braze Welding on Carbon Steel and Cast Iron Base Metals
19
Electrical Maintenance
Title AC Circuit Fundamentals
Estimated Duration (hours) 4.25
Objective(s) At the completion of this course, the student will be able to explain basic alternating current (AC) theory, and identify and explain the common connections used to build single-phase and three-phase AC circuits.
Course Modules Include AC Theory
Use of Ohm’s and Kirchhoff’s Laws
Calculation of Electrical Values of Single-Phase AC Circuits
Building Single-Phase AC Circuits
Drawing Single-Phase AC Circuits
Construction of AC Circuits
Calculation of Electrical Values of Three-Phase AC Circuits
Building Three-Phase AC Circuits
Drawing of Three-Phase AC Circuits
Determination of AC Circuit Outputs From Specified Inputs
Title AC Circuit Troubleshooting and Repair
Estimated Duration (hours) 1.0
Objective(s) At the completion of this course, the student will be able to describe the basic steps for troubleshooting and repairing alternating current (AC) circuits.
Course Modules Include Evaluation of AC Circuit Performance
AC Circuit Troubleshooting
AC Circuit Repair
20
Title Battery Chargers
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to describe the operational concepts associated with industrial battery chargers; explain the principles of rectifying alternating current (AC) power; describe the basic steps required for placing battery chargers in service; and describe the basic steps required for removing them from service.
Course Modules Include Battery Charger Operation
Principle of Rectification
Procedure for Placing the Battery Charger in Service
Procedure for Removing the Battery Charger from Service
21
Title Circuit Breakers - Low and Medium Voltage
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to determine the current flow in a circuit, describe how to match overload devices with selected types of load, describe circuit breaker testing, and explain how to perform breaker contact inspections.
Course Modules Include Matching of Overload With Selected Type of Load
Determination of the Actual Current of a Circuit
Procedure to Place All Plant Breakers in Test Position and Test
Removal of Arc Chutes on Breakers
Procedure to Check Contacts on Breakers
Title Control Devices
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to explain the function and operation of control device components, identify common electrical control device faults, and describe the basic steps for troubleshooting electrical control devices.
Course Modules Include Components of Control Devices
Functions of Control Devices
Differences Between Alternating Current (AC) and Direct Current (DC) Controllers
Identification of the Normal Position of a Control Device
Faults Associated With Control Devices
Control Device Troubleshooting
Title DC Circuit Fundamentals
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be familiar with electron theory as it relates to direct current (DC) electrical circuits. The student will be able to state Ohm’s and Kirchhoff’s laws as they relate to DC circuits, determine circuit outputs from specified inputs in DC circuits, and be able to construct basic DC circuits.
Course Modules Include Electron Theory
Use of Ohm’s and Kirchhoff’s Laws Relating to DC
Determination of Circuit Outputs From Specified Inputs
Construction of DC Circuits
Title DC Circuit Troubleshooting and Repair
Estimated Duration (hours) 0.75
Objective(s) At the completion of this course, the student will be able to evaluate direct current (DC) circuit performance, describe the major steps for troubleshooting DC circuits, and describe the major steps for performing repairs of DC circuits.
Course Modules Include Evaluation of DC Circuit Performance
DC Circuit Troubleshooting
DC Circuit Repair
22
Title Freeze Protection
Estimated Duration (hours) 1.75
Objective(s) At the completion of this course, the student will be able to describe self-limiting (regulating) cables, constant wattage heating cables, and the concept of series resistance heating cables. The student will also be able to explain the use of heat transfer cement and tape, and describe how to troubleshoot, replace, and repair freeze protection equipment.
Course Modules Include Types of Heat Trace
Self-Limiting Cables
Constant Wattage Heating Cable
Series Resistance Heating Cables
Matching of Types to Applications
Methods of Repair of Freeze Protection Equipment
Heat Transfer Cement
Heat Transfer Tape
Matching of Freeze Protection Equipment Repair to Situation
Testing of Plant Antifreeze Panels
Methods of Replacing Freeze Protection Equipment
Title Generator Basics
Estimated Duration (hours) 1.0
Objective(s) At the completion of this course, the student will be able to explain how alternating current (AC) generators produce AC voltage. The student will also be able to describe the operating characteristics of various types of generators, various generator applications, and the common types of generator construction.
Course Modules Include AC Generators
Operating Characteristics of Various Types of Generators
Generator Applications
Types of Generator Construction
Title Generator Maintenance
Estimated Duration (hours) 0.5
Objective(s) At the completion of this course, the student will be able to describe the basic steps required to perform internal cleaning, troubleshooting, disassembly, and reassembly of generators.
Course Modules Include Internal Cleaning of Generators
Generator Troubleshooting
Generator Disassembly Techniques
Generator Reassembly Techniques
23
Title Ground Detection
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to explain equipment grounding concepts, how to perform direct current (DC) ground detection, how to use DC ground detection switches as supplied by a battery charger, and which DC breakers cannot be turned off during operation. The student will also be able to identify unwanted circuit grounds, describe the process for eliminating ground faults, and describe the basic steps required for testing of proper equipment grounds.
Course Modules Include Equipment Grounding Concepts
DC Ground Detection
Use of DC Ground Detection Switches
Operation of DC Breakers
Identification of Unwanted Circuit Grounds
Elimination of Unwanted Circuit Grounds
Testing of Proper Equipment Grounds
Title Inverters
Estimated Duration (hours) 0.75
Objective(s) At the completion of this course, the student will be able to describe the operating principles of inverters, and the function and operation of inverter components. The student will also be able to describe how to place inverters in service and remove them from service.
Course Modules Include Inverter Operation
Components of an Inverter
Procedure for Placing an Inverter in Service
Procedure for Removing an Inverter From Service
Title Limitorque Valves
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to explain how to stroke a Limitorque valve, describe common maintenance procedures on limit and torque switches, and describe the basic steps required to remove a Limitorque actuator from a valve.
Course Modules Include Procedure to Electrically Stroke a Valve
Procedure to Mechanically Stroke a Valve
Method of Repairing Limit Switches
Method of Replacing Limit Switches
Method of Setting Limit Switches
Method of Repairing Torque Switches
Method of Replacing Torque Switches
Method of Setting Torque Switches
Procedure to Pull an Actuator Off a Valve
24
Title Motor Basics
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to describe the basic types of motors and explain their operating characteristics.
Course Modules Include Operating Characteristics of Various Types of Motors
Types of Motors
Induction Motors and Their Functions
Operational Theory of Induction Motors
Determination of Appropriate Application of Motors
Types of Motor Construction
25
Title Motor Maintenance
Estimated Duration (hours) 1.0
Objective(s) At the completion of this course, the student will be able to describe basic steps for troubleshooting, cleaning, disassembling, and reassembling a motor and performing operational checks when a motor is returned to service.
Course Modules Include Motor Troubleshooting
Determination of Faulty Major Component of a Motor System
Procedure to Clean a Motor
Motor Disassembly
Motor Reassembly Techniques
Operational Checks to Perform When a Motor Is Returned to Service
Title Prints and Drawings
Estimated Duration (hours) 2.0
Objective(s) At the completion of this course, the student will be able to describe the following types of drawings and diagrams: schematic, connection, logic, elementary, single-line, and piping and instrumentation drawing (P&ID).
Course Modules Include Classifications of Prints and Drawings
Schematic Diagrams
Electrical-Electronic Print and Drawing Reading
Connection Diagrams
Logic Diagrams
Single-Line Diagrams
Elementary Diagrams
Symbols/Components on Prints and Drawings
Tracing of Flowpaths of Plant P&IDs
Location and Usage of Plant Print Indexes
Title Transformers
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to describe transformer characteristics; list the essential parts of a simple transformer; state the relationship between primary and secondary voltages and transformer turns ratio; and define the terms potential transformer and current transformer. The student will also be able to state the safety hazards related to transformers; describe transformer troubleshooting techniques; and identify causes of transformer failure.
Course Modules Include Transformer Characteristics
Essential Parts of a Simple Transformer
Relationship Between Primary and Secondary Voltages and Transformer Turns Ratio
Potential Transformer
Current Transformer
Safety Hazards Related to Transformers
Transformer Troubleshooting Techniques
Causes of Transformer Failure
26
Instrumentation and Control
Title Control Devices and Indicators
Estimated Duration (hours) 2.5
Objective(s) At the completion of this course, the student will be able to explain the terminology associated with controllers and control action and describe the following: the operation of solenoid valves, the function of square root extractors, the operation and application of pressure regulators, the function of volume boosters, the operation of temperature and pressure switches, the function and operation of limit switches; the function of indicators and recorders, the basic types of final control actuators, the purpose of transducers, and the basic types of valves. The student will also be able to explain the basic steps used to troubleshoot and repair electronic control valves.
Course Modules Include Controller and Control Action
Support Instruments
Operation of Chart Recorders
Final Control Actuators
Final Control Elements
Solenoid Valves
Electronic Control Valves
Electronic Control Valve Troubleshooting and Repair
27
Title Digital Electronics
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to describe the use of decimal, octal, binary, and hexadecimal numbering systems; explain the use of BCD and ASCII codes in digital electronic circuits; and describe positive and negative logic as related to digital electronic circuits. The student will also be able to determine the appropriate digital circuit outputs from specified inputs and construct simple digital circuits. In addition, the student will be able to describe the basic steps for troubleshooting and repairing digital circuits.
Course Modules Include Digital Numbering Systems
BCD and ASCII Codes
Positive and Negative Logic
Appropriate Digital Circuit Outputs From Specified Inputs
Constructing Digital Circuits
Troubleshooting Digital Circuits
Repairing Digital Circuits
Title Electronic Circuits
Estimated Duration (hours) 1.75
Objective(s) At the completion of this course, the student will be able to explain the basic steps for constructing basic electronic circuits. The student will also be able to identify the symptoms of defective operational amplifier circuits; determine the proper feedback circuits to achieve desired operational amplifier gain; and explain the basic steps for evaluating the performance of a power supply circuit. In addition, the student will be able to describe the proper techniques for soldering in electronic circuits.
Course Modules Include Construction of Electronic Circuits
Theory of Operational Amplifier Circuits
Defective Operational Amplifier Circuits
Determination of Feedback Circuits to Achieve Desired Operational Amplifier Gain
Electronic Circuit Troubleshooting
Soldering Techniques
Title Fire Protection Instrumentation
Estimated Duration (hours) 0.5
Objective(s) At the completion of this course, the student will be able to describe the instrumentation used in selected fire protection systems. In addition, the student will be able to describe the basic steps in troubleshooting and repair of selected fire protection instrumentation.
Course Modules Include Understanding the Instrumentation Used in the Fire Protection System
Troubleshoot and Repair Fire Protection Instruments
28
Title Fundamentals of Instrumentation and Control
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to define terminology associated with control instruments; describe block diagrams; distinguish between open and closed loop systems; and describe the function and operating characteristics of various sensing devices, transmitters, valve positioners, and final control elements.
Course Modules Include Criteria for Control Instruments
Characteristics of Control Instruments
Title Microprocessors
Estimated Duration (hours) 1.75
Objective(s) At the completion of this course, the student will be able to explain the purpose and function of the basic components of microprocessors. The student will be able to describe the types and operation of memory circuits; explain the use of expansion buses and 8-bit buses used to interface microprocessors; and describe the theory of operation of microprocessor registers. In addition, the student will be able to describe the basic programming used by microprocessors and explain the basic steps for troubleshooting microprocessors.
Course Modules Include Introduction to Understanding Microprocessors
Introduction to Microprocessors and Memory
Introduction to Microprocessor Interfacing
Introduction to Microprocessor Registers
Introduction to Programming Microprocessors
Introduction to Troubleshooting Microprocessors
Title PLCs
Estimated Duration (hours) 1.75
Objective(s) At the completion of this course, the student will be able to explain the functions, basic operation, and applications of programmable logic controllers (PLCs). The student will also be able to explain the meaning of PLC status indicator lights and the basic steps for troubleshooting PLCs. In addition, the student will be able to interpret and draft ladder logic with bit instructions.
Course Modules Include Major Components of PLCs
Concepts of PLCs
PLC Status Indicator Lights
Troubleshoot PLCs
Interpreting and Drafting Ladder Logic With Bit Instructions in PLC Systems
29
Title Pneumatics - Controls
Estimated Duration (hours) 2.75
Objective(s) At the completion of this course, the student will be able to explain the operating characteristics of valve positioners and describe the basic steps required for calibrating and troubleshooting pneumatic control instruments. The student will be able to describe the operation of the Bailey Standatrol system, and identify and state the function of the major components of Bailey pneumatic drives and positioners. In addition, the student will be able to describe the basic steps required for removing meters from and returning meters to service; the basic steps required to disassemble, clean, and calibrate a Ledoux bell meter; and the basic steps required to disassemble, inspect, and set up inlet and exhaust valves on Standatrols. The student will also be able to explain the operating characteristics of I/P and P/I transducers and the basic steps required for calibrating transducers.
Course Modules Include Calibration of Pneumatic Control Instruments
Operating Characteristics of Valve Positioners
Calibration of Valve Positioners
Uses and Operation of the Bailey Standatrol
Operation of Bailey Pneumatic Drives and Positioners
Procedures for Taking a Meter Out of and Returning it to Service
Disassemble, Clean, and Calibrate a Ledoux Bell Meter
Disassemble, Inspect, and Set Up Inlet and Exhaust Valves on Standatrols
Operating Characteristics of I/P and P/I Transducers
Calibration of Transducers
Pneumatic Control Instrument Troubleshooting
Title Pneumatics - Tubing
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to describe the steps required to select the proper tubing and fittings for specific applications, taking pressure and chemical compatibility into consideration. The student will also be able describe the steps required to correctly install the following types of tubing fittings: soldered copper, copper compression, and sleeve. In addition, the student will be able to describe the following: the steps required to flare tubing, the proper use of tubing benders, and the steps required to plan and install tubing supports and hangers.
Course Modules Include Selection of Tubing for Specific Applications
Selection of Proper Tubing Fittings for an Application
Installation of Tubing Fittings
Flare Tubing for Flare Fittings
Tube Bending
Installation of Tubing Supports and Hangers
30
Title Process Control and System Tuning
Estimated Duration (hours) 4.25
Objective(s) At the completion of this course, the student will be able to describe basic principles and types of process control, and explain various methods of controller tuning.
Course Modules Include Process Control Fundamentals
Closed and Open Loop Control Systems
Proportional Control
Proportional Plus Integral Control
Proportional Plus Derivative Control
Proportional Plus Integral Plus Derivative Control
Advanced Control Methods
Open Loop Transient Response Tuning
Ziegler Nichols Controller Tuning
Frequency Response Controller Tuning
Title Process Measurement
Estimated Duration (hours) 3.25
Objective(s) At the completion of this course, the student will be able to explain the principles of pressure, temperature, and level and flow measurement; describe the operation of devices that sense each process variable; and explain the basic steps for troubleshooting those devices.
Course Modules Include Pressure Measurement
Pressure Measuring Instruments
Pressure Device Troubleshooting
Liquid Level Measurement
Level Device Troubleshooting
Flow Measurement
Flow Device Troubleshooting
Temperature Measurements
Temperature Measuring Device Troubleshooting
31
Title Semiconductors
Estimated Duration (hours) 1.5
Objective(s) At the completion of this course, the student will be able to describe the electrical characteristics of semiconductor diodes, SCRs, and TRIACs. The student will also be able to describe the basic steps for constructing semiconductor circuits. In addition, the student will be able to describe the basic steps to troubleshoot a semiconductor circuit, identify a defective semiconductor device, and repair a semiconductor circuit.
Course Modules Include Electrical Characteristics of Diodes
Electrical Characteristics of SCRs and TRIACs
Construction of Semiconductor Circuits
Semiconductor Circuit Troubleshooting
Identification of Defective Semiconductors
Semiconductor Circuit Repair
Title Test Equipment and Calibration
Estimated Duration (hours) 2.5
Objective(s) At the completion of this course, the student will be able to define basic instrumentation terms, and identify various components in an instrumentation loop and explain their function. In addition, the student will be able to explain the use of multimeters, oscilloscopes, and portable power supplies. The student will also be able to describe the operation of temperature-sensing devices and how to test them. Finally, the student will be able to explain the basic principles of calibration.
Course Modules Include Instrumentation and Control
Use of Multimeters
Oscilloscopes
Portable Power Supply
Temperature Measurement
Calibration of Control Instruments
32
Industrial Math and Science
Title Basic Math Operations
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to solve arithmetic problems using addition, subtraction, multiplication, and division; and solve problems requiring conversion between decimals, fractions, and percentages. In addition, the student will be able to solve math problems requiring averages of a given number set and problems with powers of ten notation.
Course Modules Include Math Problems Using Addition, Subtraction, Multiplication, and Division
Placement of Decimals
Math Problems Using Whole Numbers and Decimals
Decimals Into Fractions
Fractions Into Decimals
Decimals and Fractions Into Percentages
Percentages Into Fractions and Decimals
Averaging
Positive Powers of Ten
Negative Powers of Ten
Title Chemistry
Estimated Duration (hours) 1.25
Objective(s) At the completion of this course, the student will be able to describe the fundamental principles of chemistry. The student will also be able to calculate the density of various materials and calculate specific gravity.
Course Modules Include Introduction to Chemistry
Density
Specific Gravity
33
Title Geometry
Estimated Duration (hours) 1.0
Objective(s) At the completion of this course, the student will be able to identify various geometric shapes and calculate their area, calculate the correct dimensions relating to the hypotenuse of a right triangle, and calculate the volume of various geometric shapes.
Course Modules Include Area
Triangles
Volume
Title Tables and Graphs
Estimated Duration (hours) 0.25
Objective(s) At the completion of this course, the student will be able to recognize and describe tables, charts, and graphs, and explain how to read the data represented by them.
Course Modules Include Relationships Between Tables and Graphs
Tables and Graphs Related to Math
Solve Problems Using Tables and Graphs
34
Lean Learning for the Oil and Gas Industry
Title 5 Phases of Lean Transformation
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will learn about the 5 phases of Lean transformation.
Title 5S Application
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
Describe each of the 5S steps.
Apply the 5S process to your work environment.
35
Title Andon
Estimated Duration (hours) 0.75
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will learn about Andon; its applications, tools and concepts and how Andon is set up. After completing this module, you will be able to:
Describe what an Andon is.
Explain its capabilities and uses.
Describe how to implement an Andon system.
Title Blue Sky Vision Workshop Preparation
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn:
What a Blue Sky Vision™ is.
How to create a Blue Sky Vision™ for your organization.
How that vision is translated into an action plan called a Master Schedule.
Title Built in Quality
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Define Built in Quality.
Describe the tools.
Explain how these tools are used.
36
Title Communication Skills for the Workplace
Estimated Duration (hours) 1.0
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will learn about:
Assertiveness in communication.
Criticism without conflict.
Using questioning skills.
Title Communications Skills for Leaders
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about:
Reasons presentations fail.
Defining your reasons for speaking.
Preparing your presentation.
Title Conducting a Kaizen Event
Estimated Duration (hours) 0.75
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about conducting Kaizen events.
Title Conflict Management
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will learn about:
The effects of conflict.
Conflict management definitions.
Styles of managing conflict.
Conflict management cycle.
Resolving conflict.
37
Title Core Leadership Skills Introduction
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will be introduced to:
Blue Sky Vision preparation.
Goals and goal setting.
Meeting facilitation.
Conflict resolution.
Communicating in the workplace.
Managing for commitment.
Creating a Lean culture.
Title Current State Maps
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will be introduced to the Current State Map (CSM) and its purpose.
Title Decoding the DNA of TPS
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will gain insight into the Toyota Production System (TPS).
38
Title Deep Dive Site Assessment
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics After completing this module, you will understand what a Deep Dive Assessment is and be able to:
Describe a Strategic Assessment.
Explain a Tactical Assessment.
Describe an Operational Assessment.
Title Demand Instruction
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Explain what demand is.
Discuss scheduling.
Define the Heijunka process.
Define Takt Time.
Title Enterprise Assessment
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
Understand the current state of the enterprise.
Discuss the future state developments.
Describe development and rollout of the New Vision.
Title Error Proofing
Estimated Duration (hours) 1.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will be introduced to:
Definition of error proofing.
Levels and process.
Defects and errors.
Poka-Yoke and in-station process control.
Process failure modes and effect analysis.
Error proofing devices.
39
Title Essential Elements of Communication
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will learn about the importance of effective communication and fundamentals of good communication.
Title External Logistics
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Define external logistics.
Explain plan logistics.
Illustrate the role of the lead logistics provider.
Discuss the shipping and inventory management process.
Title Future State Maps
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will be introduced to the Future State Map (FSM) and its purpose.
40
Title Goals and Goal Setting
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about:
Defining goals.
Thinking strategically in goal setting.
Aligning priorities and goals.
Title Going Lean in the Oil and Gas (Processing) Operations
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module you will:
Review examples of application of Lean in oil and gas industry.
Have an opportunity to read a paper on the application of Lean.
Learn about barriers to implementing Lean.
Learn about conditions for successful implementation of Lean.
Take a short assessment.
Title Heijunka
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will:
Introduce and demonstrate the concept of Heijunka.
Understand the benefits of Heijunka.
Understand how to apply Heijunka in a typical process.
Identify how Heijunka interacts with other Lean tools.
Title Hoshin Kanri
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about the Hoshin Kanri method of promoting, driving, and measuring organizational goals and alignment.
41
Title How Kaizen Works
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will become aware of ways that Kaizen is implemented and how improvements are sustained over time.
Title Inventory Management
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Discuss the background of how inventory control fits into operation of oil and gas production or processing sites.
Explain the need for changing typical inventory management techniques.
Explain the philosophy called synchronous material flow.
Discuss the benefits of inventory management.
Describe some actual examples.
Title Just Culture
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will learn about Just Cultures and their impact on potential health and safety concerns, productivity issues, system waste, and continuous improvement opportunities.
42
Title Just in Time
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
Define Just-in-Time (JIT) and Kanban.
Identify how they fit into a Lean organization.
Identify two types of Kanban.
Identify the benefits of Kanban.
Title Kaizen Pre-Assessment and Introduction
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will be introduced to the concept of Kaizen or continuous improvement.
Title Kaizen Review and Post-Assessment
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will review Kaizen and take the post assessment.
Title Kamishibai
Estimated Duration (hours) 1.0
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn:
What Kamishibai is.
How Kamishibai works.
How to use Kamishibai cards.
How to use a Kamishibai board.
How to start implementing the method.
43
Title Kanban
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
Discuss the fundamentals of Kanban.
Define Kanban terms.
Explain the uses of Kanban.
Discuss its tools.
Title Leader Daily Management/Front Line Supervision
Estimated Duration (hours) 1.0
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about:
Leadership characteristics.
Leadership behaviors and styles.
Developmental levels.
Plan-Do-Check-Act (PDCA) cycle.
Title Leadership Behaviors
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about:
Human-centered behaviors.
Plans for change.
Leadership role.
Title Lean Layout Design
Estimated Duration (hours) 0.75
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about the role that Lean layout plays in a Lean oil and gas operations support function. After completing this module, you will be able to:
Define Lean layout, its objectives, and its principles.
Evaluate your workplace and identify opportunities to improve it using Lean layout.
44
Title Lean Measurables
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will learn about the basic philosophy of Lean measurables and how metrics fit into the Lean system and assist you in performing daily tasks.
Title Lean Overview - Part I
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will review:
Classification of the modules by subject categories and by roles.
The concept of a Lean Learning Academy (LLA).
An overview of Lean.
The 14 principles of Lean thinking.
Lean in the oil and gas industry.
Title Lean Overview - Part II
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will review:
The Lean philosophy.
The relentless pursuit of "ideal."
Toyota’s success story.
7 Wastes + 1.
45
Title Lean Overview - Part III
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will review:
The Lean house.
The foundational emphasis of Lean.
Title Lean Overview - Part IV
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will:
Have the opportunity to view videos on application of Lean at two manufacturing sites.
Gain an overview of Lean in the oil and gas industry.
Take a summative assessment pertaining to the topic of "Lean Overview."
Title Man Machine Separation
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will:
Explain the role of autonomation in the Lean house.
Discuss the advantages of standardized work.
Title Management Audit Systems
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will learn about managing a Lean environment. After completing this module, you will be able to:
Manage in a Lean environment.
Understand how the Lean tools help manage.
Describe the key points affiliated with a Lean environment.
46
Title Management Centers
Estimated Duration (hours) 1.0
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
Discuss visual management – displays and controls.
Describe the communication structure.
Establish a production management center.
Title Managing for Commitment
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will review how to become the type of manager that your employees need in order to be successful in the work environment today.
Title Managing in a Lean Environment
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about leadership skills needed to manage and lead an organization in a Lean environment. Some of these skills deal with using specific types of management tools while others relate to the Lean mindset.
Title Material Conveyance
Estimated Duration (hours) 1.0
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Discuss the background of how material conveyance fits into the operations support function of a hydrocarbon processing facility.
Discuss the need for improving material conveyance.
Explain a technique called productivity modeling.
Discuss the benefits of productivity modeling.
Describe some actual improvement examples.
47
Title Meeting Facilitation
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will be introduced to methods of conducting productive meetings. In this module, team facilitators will learn the skills necessary to lead successful meetings and to ensure an outcome of productive nature.
Title Numbers Game
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will be introduced to the principles of workplace organization.
Title Organization Goal Setting Article
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you'll read a report on Hoshin Kanri.
Title Problem Solving Part-I
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will be introduced to Problem Solving as a Lean concept.
Title Problem Solving Part-II
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will look at defining a problem that is to be solved.
Title Problem Solving Part-III
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will expand on the Problem Solving Theme selected earlier to document the Problem Situation.
48
Title Problem Solving Part-IV
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will review the steps involved in documenting the target on the Problem Solving Report.
Title Problem Solving Part-V
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will learn how to analyze the causes of a problem.
Title Problem Solving Part-VI
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will review how to select and implement countermeasures that will eliminate the problem and permanently prevent recurrence.
49
Title Problem Solving Part-VII
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will look at following up during a Problem Solving effort.
Title Problem Solving Part-VIII
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will you will apply what you have learned in the previous Problem Solving modules to complete the Post Assessment.
Title Process and Value Stream Mapping
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics After completing the next three modules on value stream mapping (VSM), you will be able to:
Explain what a Value Stream Map is.
Describe how VSM is used.
Explain ways that VSM helps to improve processes.
Title Productivity Modeling
Estimated Duration (hours) 0.75
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
Describe productivity modeling .
Define its objective.
Define the approach.
Describe the tools used.
Discuss its benefits.
50
Title Quick Changeover
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Define Quick Changeover.
Describe steps to reducing changeover time.
Identify and implement improvements in changeover.
Determine how changeover time impacts key operating system principles.
Recognize the benefits gained from reduced changeover time.
Title Standard Inspection
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Develop a plan.
Determine how the plan will be run.
Report abnormalities.
Monitor and improve uptime.
Title Standardization and Standardized Work
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will:
Define Standardized Work.
Identify how it fits into a Lean organization.
Identify the benefits of Standardized Work.
Define the Standardized Work process tools.
Title Standardization Post-Assessment
Estimated Duration (hours) 0.25
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will:
Review standardized work.
Complete the standardization and standardized work post-assessment.
51
Title Standardized Work Tools
Estimated Duration (hours) 0.75
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will review the steps to create the following standardized work elements:
Spaghetti diagram.
Standardized work sheet.
Capacity sheet.
Cross-training matrix.
Title Supply Chain
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics After completing this module, you will be able to:
Define the supply chain.
Explain the typical value stream.
Describe the internal supply chain.
Explain Kanban.
Title The Checklist
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will:
Learn about the importance of checklists
Be asked to review excerpts of articles about checklists
Learn about the essential elements of good checklists
View a few examples of checklists
Have an opportunity to review your learning by taking an assessment
52
Title Total Productive Maintenance
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
List and define basic philosophies, principles, and tools of total productive maintenance (TPM).
Explain how TPM fits into the Lean system.
Explain how TPM can assist in your daily job.
Title Turning Employees Into Problem Solvers
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will be introduced to Toyota's approach to Problem Solving by reading "How Toyota Turns Workers Into Problem Solvers."
Title Visual Management
Estimated Duration (hours) 1.0
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will learn about the role that visual management (VM) plays in a Lean oil and gas operations site. After completing this module, you will be able to explain:
What VM is.
How applying VM can help your organization reduce waste, improve productivity and safety, and reduce costs.
Title Visual Management and Workplace Organization
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will examine the principles of visual management and workplace organization.
53
Title VSM Summary and Post-Assessment
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will review the Value Stream Mapping (VSM) concepts and then take a post assessment.
Title Waste Definition
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Executive
Manager
Practitioner
Objectives / Topics In this module, you will review the basic concept and Lean definition of waste.
Title Waste Examples
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will be provided with more in-depth definitions and examples of waste.
Title Waste Identification Example and Post-Assessment
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will be provided with an example to begin applying what you know about waste to improve a process. After the exercise, you will take a post-assessment.
Title Waste Walk Preview Exercise
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Practitioner
Objectives / Topics In this module, you will conduct a waste walk. Before looking at eliminating waste in future modules, you will need to do a preliminary "waste walk" in an area of your choosing. A waste walk is one opportunity to go, look, and see what waste is present in a process.
54
Title Waste Pre-Assessment and Introduction
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics In this module, you will take a pre-assessment before looking at the different forms of waste.
Title Work Teams
Estimated Duration (hours) 0.5
Available Only as Part of This Package / These Packages
Manager
Practitioner
Objectives / Topics After completing this module, you will be able to:
Define a team.
Explain the four stages of team development.
Explain the purpose of a team in a Lean organization.
55
US General Industry Safety
Title Asbestos Hazard Awareness
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of how to identify asbestos hazards and take protective measures at work. Trainees will learn about the sources and properties of asbestos, its historical and contemporary uses, how to spot asbestos hazards, and how to minimize or eliminate those hazards. This course is intended to help meet the requirements of OSHA Standard 29 CFR 1910.1001. Related information is provided in courses such as Basic Respiratory Protection and Personal Protective Equipment.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify sources and properties of asbestos
Identify historical and contemporary uses of asbestos
Describe hazards of asbestos exposure
Recognize sources of asbestos exposure
Identify controls to eliminate asbestos exposure hazards
Title Back Injury Prevention
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of the major causes of workplace back injuries and how to prevent them. Trainees will learn about hazards and the three major types of hazard controls. This course provides information to help meet OSHA Standard 1910.900. Related information is provided in courses such as Industrial Ergonomics and Office Ergonomics.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recall back injury hazard engineering controls
Recall back injury hazard administrative controls
Recall back injury hazard personal protective equipment
56
Title Benzene Awareness
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize the hazards, common sources, and recommended safe work practices associated with benzene.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the common uses, sources, and hazards of benzene
Recognize OSHA’s safety requirements for workplaces in which benzene is present
Identify possible exposure controls
Title Bloodborne Pathogens
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will demonstrate knowledge of the hazards of bloodborne pathogens in the workplace. Trainees will learn how to identify major bloodborne diseases and symptoms, how pathogens are transmitted, the basics of exposure prevention, and incident response and cleanup. This course is intended to help meet the requirements of OSHA standard 29 CFR 1910.1030 and can be used to supplement the Basic First Aid course and CPR Refresher course.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the basics of the OSHA standard
Identify bloodborne diseases and symptoms
Recognize the different modes of transmission
Recognize the basics of exposure control
Recognize proper incident response and cleanup
provisions
Title Carcinogens Awareness, Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize the hazards, characteristics, and safe work practices associated with workplace carcinogens.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the characteristics and hazards of carcinogens
Identify carcinogen-regulating agencies and occupations commonly associated with carcinogen exposure
Identify possible carcinogen-exposure preventive measures
57
Title Chemical Hygiene
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize the purpose and components of a chemical hygiene plan and identify their responsibilities in the continued implementation of such a plan.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the definitions relating to OSHA’s requirements for chemical hygiene plans
Identify OSHA-required components of a chemical hygiene plan
Identify OSHA’s requirements for training and information given to employees
Identify OSHA’s employee exposure monitoring and medical examination requirements
Recognize OSHA’s requirements for hazard identification
Title Chemical Safety, Basic
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will demonstrate knowledge of safe work practices to be used while working with and around different types of chemicals. Trainees will learn how to identify hazards associated with different chemicals, how to identify those hazards based on container labeling, how to properly use personal protective equipment, and describe safe storage and cleanup procedures. This course will help meet several standards found under OSHA 29 CFR 1910 Subpart H. Related information is provided in courses such as the Hazard Communication, Using Portable Fire Extinguishers, Flammable and Combustible Liquids, and Personal Protective Equipment (PPE).
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Predict the hazardous results of chemicals in the workplace
Match chemical hazards with pictorial and written labels
Identify PPE based on signs and written sources
Relate the need for safe storage of chemicals
Recognize the need for spill response
Title Cold Stress in the Workplace
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of hazards associated with working in cold temperatures and how to minimize or eliminate those hazards. Trainees will learn how to anticipate and identify the effects of cold stress and learn methods used to prevent it. This course is intended to help meet the requirements of the OSHA General Duty Clause of the OSHA Act. Related information is provided in the Personal Protective Equipment course.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize that cold stress can occur in certain workplace situations
Identify cold stress health effects and proper response
Identify methods that can prevent cold stress
58
Title Compressed Gas
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of the hazards associated with working around compressed gases and how to minimize or eliminate them. Trainees will learn how to identify the hazards of compressed gases and compressed gas cylinders, how to identify labeling and storage requirements for cylinders, and how to implement safe work practices. This course is designed to help meet the requirements of OSHA standard 29 CFR 1910.101. Other related courses are Hot Work/Arc Welding, Basic Fire Safety, and Hazard Communication.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the hazards of compressed gases and their cylinders
Identify safe work practices to be used when working with compressed gases
Recognize labeling and storage requirements for compressed gases
Title Confined Space Awareness
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will be able to identify the major hazards associated with working in and around confined spaces, and recognize methods to minimize or eliminate those hazards. This course is provided to help meet the requirements of OSHA Standard 29 CFR 1910.146. Workplace-specific information and hands-on training requirements for OSHA 29 CFR 1910.146 will be needed in addition to this course. In addition to this course, related courses covering Hot Work and Respiratory Protection may be needed to meet other OSHA training requirements.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify what constitutes a confined space
Recognize hazards found in confined spaces
Recognize the methods used for controlling hazards
Identify what constitutes a permit-required confined space
Recognize when respirator use may be required for confined space entry
Recognize that specific training is a must for confined space entry
Title CPR Refresher
Estimated Duration (hours) 0.25
Description This course will give trainees who have already been trained to perform CPR a review of CPR’s major procedures. Trainees will review how CPR works, when CPR should be performed, and how to properly perform it. This course is intended to help meet the standards of OSHA 29 CFR 1910.151. Related information is provided in the Basic First Aid course.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify and define CPR
Recognize when CPR is needed and describe appropriate response actions
Identify and describe proper administration of rescue breathing
Identify and describe proper administration of chest compressions
59
Title Electrical Safety - Arc Flash
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to recognize the conditions that commonly produce arc flashes, identify required measures for preventing arc flashes, and identify the personal protective equipment that should be used for arc flash protection.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the damage that can be caused by an arc flash
Identify what procedures to take to prevent an arc flash
Identify the personal protective equipment that should be used for arc flash protection
60
Title Electrical Safety - Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of potential hazards associated with electrical equipment in the workplace and how to minimize or eliminate those hazards. Trainees will learn how to recognize the dangers of electricity, how to identify possible electrical injuries, and how to use standard hazard controls. This course is provided to help meet the requirements of OSHA Standards 29 CFR 1910.301 and 1926.416.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the dangers of electricity and the importance of electrical safety
Identify possible electrical injuries
Identify electrical hazards and their controls
Recognize handheld power tool requirements
Select ways to prevent electrical hazards
Title Electrical Safety - Grounding
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize the safety function of electrical grounding, its applications in the workplace, and OSHA’s grounding requirements for workplace electrical equipment.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the function of electrical grounding and its safety importance
Identify situations in which grounding is required to ensure worker safety
Title Emergency Action Plans for Office Employees
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will display the ability to identify several types of common emergency situations and how to react to them in an office setting.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the possible types of emergency alarm signals
Identify the common required steps and strategies to be followed during an emergency evacuation
Identify the proper circumstances and methods for using a portable fire extinguisher
Identify recommended safety measures to take before, during, and after a tornado
Identify recommended safety measures to take if a hostile/violent person is in the office
Identify recommended safety measures to take during a blackout
Identify recommended safety measures to take during a bomb threat
61
Title Emergency Response, Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of what to do in case of an emergency in the workplace. Unexpected emergencies can happen anytime, anyplace. Trainees will learn how to identify the importance of a well-defined emergency response plan and reporting emergencies, list the components of an evacuation, and identify emergency response actions. This course provides information to meet the training requirements of OSHA Standard 29 CFR 1910.38. Related information is provided in the Fire Safety and Using Portable Fire Extinguishers courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the need for an emergency response plan
Recognize the importance of reporting emergencies and the options available
Identify the components of an evacuation
Identify Emergency Response Actions
Title Excavation and Trenching
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will know how to recognize the potential hazards of working in or around trenches and excavations, and the OSHArequired protective measures they must employ on the job. This course is intended to help meet OSHA Standards 29 CFR 1926.650 through 652.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the potential hazards associated with excavation and trenching
Identify the responsibilities of the employee and competent person
Recognize and identify common protective systems
Identify various safe work practices for trenching and excavation work
Title Fall Protection, Introduction
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of the importance and practice of consistent fall protection. Falling is consistently one of the most common causes of workplace fatalities. Trainees will learn about fall hazards, how to identify fall protection methods, and various safe work practices. This course provides information to meet the training requirements of OSHA 29 CFR 1926.502. Hands-on training for personal fall arrest systems will need to be provided. Related information is provided in the Slips, Trips, and Falls course; the Scaffold Safety course; and the Severe Weather Safety and Outdoor Work course.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize fall hazards
Identify passive fall protection methods
Recognize floor openings, platforms, and wall openings
Recognize fall hazards on stairways
Recognize ladder hazards
Recognize fixed ladder and scaffold hazards
Identify fall arrest systems
Identify safe work practices and training
62
Title Fire Safety, Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of how to respond to a fire emergency in order to stay safe. Unfortunately, fires are all too common in the workplace. Trainees will learn their responsibilities in a fire emergency, how to identify different alarm signals and become familiar with evacuation routes and procedures, and fire extinguisher use. This course is provided to help meet the requirements of OSHA Standard 29 CFR 1910.33 - 39. Related information is provided in the Using Portable Fire Extinguishers course and the Emergency Response course.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize employee responsibilities in fire prevention plans
Recognize alarm signals
Identify the evacuation route and procedure
Describe fire extinguisher use
Recognize a combination evacuation plan
63
Title First Aid, Basic
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will demonstrate knowledge of first aid procedures and how to apply them to real-world scenarios. Trainees will learn their legal responsibilities as a first aid provider, how to identify different types of medical emergencies and the proper steps to take, and how to react in specific environmental conditions like extreme heat and cold. This course is provided to help meet the requirements of OSHA Standard 29 CFR 1910.151, Medical Services and First Aid.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify and describe OSHA’s requirements for medical care
Define first aid and discuss personal responsibility and company policy
Identify and describe types of medical emergencies and appropriate response actions
Recognize and describe types of injury emergencies and appropriate response actions
Recognize and describe types of environmental emergencies and their appropriate response actions
Recognize and describe types of temperature-related emergencies and their appropriate response actions
Recognize and describe poisoning emergencies and their appropriate response actions
Title Flammable and Combustible Liquids
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of different flammable and combustible liquid hazards and how to minimize or eliminate those hazards. Trainees will learn how to identify flammable and combustible liquid hazards with Material Safety Data Sheets and labeling, and how to select hazard prevention measures. This course is intended to help meet OSHA Standard 29 CFR 1910.106. Workplace specific information will need to be added. Related information is provided in the following courses: Hazard Communication, Material Safety Data Sheets, Chemical Safety, Fire Safety, and Using Portable Fire Extinguishers.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify hazards of flammable and combustible liquids
Recognize ways to identify flammable and combustible liquids
Select hazard prevention measures
Describe the basics of handling spills or leaks
Title Forklift Operator Training - Fundamentals
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will display the ability to recognize the forklift’s instruments and controls, describe common hazards associated with forklift operation, and describe OSHA-required safe work practices for forklift operation.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize that operating instructions, warnings, and precautions for forklifts exist
Recognize the components of a forklift and label the various controls
Identify forklift requirements that can affect safe use
Recognize forklift operation requirements
Identify workplace conditions that could affect safe forklift use
Choose different precautions to take to protect the operator and pedestrians
Recognize the requirements for a forklift to operate in a safe atmosphere
64
Title Forklift Operator Training - Safe Maintenance
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to identify the safe work practices required by OSHA for proper forklift maintenance.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify OSHA’s requirements for safe forklift maintenance practices
65
Title Forklift Operator Training - Safe Operations
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to identify the safe work practices required by OSHA for proper forklift operations.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify OSHA’s requirements for safe forklift operating practices
Title Forklift Operator Training - Safe Traveling and Loading
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to identify the safe work practices required by OSHA for proper forklift traveling and loading.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify OSHA’s requirements for safe forklift traveling practices
Identify OSHA’s requirements for safe forklift loading practices
Title Hand and Power Tool Safety
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will demonstrate knowledge of the importance of hand and power tool safety and how to achieve it. Trainees will learn the common hazards of different types of hand and power tools, including electrical, pneumatic, hydraulic, and abrasive-wheel tools, and how to minimize or eliminate those hazards. This course is provided to help meet the requirements of OSHA Standard 29 CFR 1910.241 - 244.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify and discuss how OSHA regulates the use of hand and power tools
Describe the potential hazards and injuries from improper hand and power tool use
List employer and employee responsibilities for safe use of hand and power tools
Identify and discuss common power tools and their safe work practices
Identify electric tool hazards and describe their safe work practices and inspection procedures
Identify power abrasive wheel tool hazards and describe their safe work practices and inspection procedures
Identify pneumatic tool hazards and describe their safe work practices and inspection procedures
Identify power-actuated tool hazards and describe their safe work practices and inspection procedures
Identify hydraulic power tool hazards and describe their safe work practices and inspection procedures
Identify the three main causes of injury from hand and power tools and methods of injury prevention
66
Title Hazard Communication, Introduction
Estimated Duration (hours) 0.5
Description Hazard Communication is an OSHA standard that requires employers to create a program addressing chemical hazards in the workplace. Upon completion of this learning event, trainees will demonstrate knowledge of Hazard Communication programs. Trainees will learn about the hazards of potential chemical exposure, types of hazards, Material Safety Data Sheets, chemical detection methods, and how chemical hazards are controlled. This course is intended to meet OSHA Standard 29 CFR 1910.1200. Related information is provided in courses such as Chemical Safety, Flammable and Combustible Liquids, Fire Safety, and Personal Protective Equipment.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the possibilities of potential chemical exposure
Identify types of hazards
Identify routes of entry and methods of protection
Recognize methods of hazard assessment
Identify elements of Material Safety Data Sheets
Recognize the basics of chemical detection methods
Title Hearing Conservation
Estimated Duration (hours) 0.25
Description Hearing loss is a major hazard in many workplaces. Upon completion of this learning event, trainees will demonstrate knowledge of noise levels, hearing hazards, and OSHA’s recommendations on how to prevent hearing loss. Trainees will learn how to define noise and noise levels, describe hearing loss, and recognize different types of hearing protection. This course is provided to help meet the requirements of OSHA Standards 29 CFR 1910.95, and 1926.52, Occupational Noise Exposure for General Industry and Construction respectively.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Define “noise” and “noise levels”
Describe hearing loss and OSHA’s provisions to prevent it
Recognize personal hearing protection devices and their differences
Recall the basics of audiometric testing
67
Title Heat Stress in the Workplace
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of hazards associated with working in high heat and how to minimize or eliminate those hazards. Trainees will learn how to identify the hazardous health effects of high heat; methods to prevent those health effects; and what to do if a co-worker exhibits symptoms of heat stress like heat fatigue, heat rash, heat cramps, heat exhaustion, and heat stroke. This course is intended to meet the requirements of the OSHA General Duty Clause Section 5(a)(1). Related information is provided in courses such as Basic First Aid, and Severe Weather Safety and Outdoor Work.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize that heat stress can occur in certain workplace situations
Identify heat stress health effects and proper response
Recognize that determining heat stress load for different people is difficult
Identify the methods that can prevent heat stress
Recognize that there are means to control heat stress
Title Hot Work - Arc Welding
Estimated Duration (hours) 0.5
Description Hot work, which includes torch cutting and welding, carries its own set of workplace hazards. Upon completion of this learning event, trainees will demonstrate knowledge of the hazards associated with arc welding hot work and how to protect themselves from them. Trainees will learn about burns, fumes, and gases; electric shock; and fire and noise hazards. This course is provided to help meet the requirements of OSHA Standard 29 CFR 1910.252, General Requirements and 254, Arc Welding and Cutting. Related information is provided in the Fire Safety and Using Portable Fire Extinguishers courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the hazards associated with welding
Describe how to protect against burns
Describe how to protect against fumes and gases
Describe how to protect against electric shock
Describe how to protect against fire
Describe how to protect against noise
Identify the special hazards associated with engine powered welders
68
Title Incident Investigation
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of incident investigations and their basic performance. Trainees will learn when to perform an investigation, who should be involved, what to ask, who to ask, and the proper steps to meet the company’s goals. This course provides information to aid the employer in meeting OSHA Standard 29 CFR Subpart E. Related information is provided in the Performing Safety Audits and Job Safety Analysis courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify after what circumstances an investigation should be performed
Identify who should be involved with an in-house investigation
Identify what questions an investigation should answer
Recognize the proper order of an investigation
Recognize the goal of an in-house incident investigation
Title Indoor Air Quality
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of indoor air quality, how it can become a hazard, and what they can do to prevent poor air quality in the workplace. Trainees will learn how to identify air contaminant types and their sources and good habits for keeping the air clean and breathable.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the defining elements of indoor air quality
Identify possible air contaminant types and sources, and employee preventive measures
Identify employee actions that can affect indoor air quality
Title Industrial Ergonomics
Estimated Duration (hours) 0.25
Description Ergonomics is the process of reducing worker injury through effective workplace design. Upon completion of this learning event, trainees will demonstrate knowledge of ergonomics in industrial settings to reduce injury. Trainees will learn how to identify ergonomic risk factors, potential injuries, and methods to minimize or eliminate ergonomic hazards. This course is provided to help meet the requirements of OSHA Standard 1910.900. Related information is provided in the Job Safety Analysis, Back Injury Prevention, and Office Ergonomics courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify ergonomic risk factors in the workplace
Recognize the potential injuries from poor ergonomic design
Identify ergonomic controls used to reduce injuries
Recall the process of reporting ergonomic problems
Identify the role of the employee in an ergonomic program
69
Title Industrial Hygiene, Introduction
Estimated Duration (hours) 0.25
Description Industrial hygiene is the discipline of reducing worker injury due to chemical and other exposure hazards. Upon completion of this learning event, trainees will demonstrate knowledge of the background, principles, and role of industrial hygiene. Trainees will learn the history of industrial hygiene, major roles of industrial hygiene in workplaces, and the types of workplace hazards industrial hygiene addresses and how they are controlled. Related information is provided in courses such as OSHA - Introduction, and Performing Safety Audits.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify major points of industrial hygiene and its history
Recognize OSHA’s relationship to industrial hygiene
Identify and define worksite analysis and types of worksite hazards
Identify methods of controlling worksite hazards
Title Job Safety Analysis, Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of the basic concepts and procedures of a job hazard analysis. Trainees will learn about the need for effective job hazard analysis, how to prepare for one, the process of identifying workplace hazards, and how to correct them. Related information is provided in courses such as the Performing Safety Audits and Incident Investigation.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Describe the need for job safety analysis
Recall the process of preparing for a job safety analysis
Recall the process of identifying workplace hazards
Recall the means of correcting or preventing hazards
Title Lab Safety Awareness, Basic
Estimated Duration (hours) 0.5
Description Upon completion of the learning event, trainees will have displayed the ability to identify common laboratory hazards and related safe work practices required and recommended by OSHA.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify physical hazards common to lab work
Identify chemical hazards common to lab work
Identify personal protective equipment (PPE) recommended for lab work
Identify recommended emergency procedures for lab work
Identify recommended general safe work practices
70
Title Ladder Safety
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of ladder hazards and consistent safe work practices. Trainees will learn to recognize the hazards of ladder use, identify the different types of ladders, list inspection requirements for ladders, and recognize the rules of ladder use. This course is intended to help meet OSHA Standards 29 CFR 1910.24 - 27.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize hazards of ladder use
Identify different types of ladders
List inspection requirements of different ladders
Recognize the rules of ladder use
Identify basic fall protection requirements
Title Lead Awareness
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of lead exposure hazards and controls used to minimize or eliminate those hazards. Trainees will learn about the effects of lead exposure, their rights as workers in a facility with lead present, and the use of personal protective equipment (PPE) and other methods to reduce the risk of hazardous exposure. This course is intended to help meet the requirements of OSHA Standard 29 CFR 1910.1025.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify potential adverse effects of lead exposure
Recognize that employers must adhere to exposure limits
Identify how lead can enter the body
Recognize controls used to protect against lead exposure
Select appropriate PPE to protect against lead exposure
Title Lockout/Tagout
Estimated Duration (hours) 0.25
Description Upon completion of this online course, trainees will demonstrate knowledge of how lockout/tagout programs work and the different roles workers must play to make them successful. Trainees will learn to identify the importance of proper lockout/tagout procedures, who is authorized to perform those procedures, the special provisions of lockout/tagout programs, and more. This course is provided to help meet the requirements of OSHA Standard 29 CFR 1910.147. Workplace specific information will need to be provided by the employer. Related information is provided in courses such as Machine Guarding and Hazard Communication.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the importance of proper lockout/tagout procedures
Determine who is authorized to perform lockout/tagout
Recognize the required tasks of the authorized employee during lockout/tagout
Recognize lock systems and tags for lockout/tagout
Identify the special provisions of a lockout/tagout system
71
Title Machine Guarding
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of machine guarding, its function, and importance. Trainees will learn to define machine guarding and locate fundamental machine areas, machine hazards, the types of machine guards, and the types of machine devices. This course is intended to help meet the provisions of OSHA Standard 29 CFR Subpart O. Related information is provided in the Lockout/Tagout, and Hand and Power Tool Safety courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Define machine guarding and its importance
Identify machine motions and actions, and their hazards
Recognize the need for and requirements for guards
Recognize the types of machine guards
Recognize the types of machine devices
Title Material Safety Data Sheets
Estimated Duration (hours) 0.5
Description Material Safety Data Sheets (MSDSs) are provided by chemical manufacturers to communicate the potential chemical hazards of their products. Upon completion of this learning event, trainees will demonstrate knowledge of MSDSs and how they can use them to protect themselves from harmful exposure. Trainees will learn to recognize the purpose of MSDSs, identify the sections of MSDSs and their contents, use a glossary to find common MSDS terms, and identify where MSDSs should be kept. This course is provided to help meet OSHA Standard 29 CFR 1910.1200. Related information is provided in the Hazard Communication course.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the purpose of the MSDS
Identify the sections of the MSDS and its contents
Use a glossary to find common MSDS terms
Identify where the MSDSs are kept
Title Materials Handling
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will demonstrate knowledge of materials handling and storage, potential hazards, and methods to control those hazards. Trainees will learn to recognize lifting hazards and safe lifting techniques, proper methods for safe material stacking and storage, proper use of mechanical material handling equipment, and the role of ergonomics in safe materials handling. This course is intended to help meet the requirements of OSHA Standard 29 CFR 1910.176. Related information is provided in the Overhead and Gantry Crane Safety, Industrial Ergonomics, and the various Forklift courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize lifting hazards and safe lifting techniques
Identify proper methods for safe material stacking
Identify proper methods for safe material storage
Recall hazards and proper use of mechanical material handling equipment
Recognize the role of ergonomics in safe materials handling
Recall the application of hazard controls in materials handling and storage
72
Title Occupational Safety and Health Programs
Estimated Duration (hours) 0.25
Description To help protect workers from potential hazards, many companies are required to create Occupational Safety and Health (OSH) programs. Upon completion of this learning event, trainees will demonstrate knowledge of OSH programs and how they protect workers. Trainees will learn to identify the impact of injuries and accidents in the workplace, elements of safety management, types of workplace analyses, methods to control workplace hazards, and the several types of trainee safety and health training. Related information is provided in the Performing Safety Audits, OSHA - Introduction, and Industrial Hygiene courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify and define the impact of injuries and accidents in the workplace
Identify and define safety management system elements
Identify examples of management commitment to occupational safety and health programs
Identify examples and define types of workplace analysis
Identify methods to control and prevent hazards in the workplace
Identify and define types of employee safety and health training
Title Office Ergonomics
Estimated Duration (hours) 0.25
Description Ergonomics is the process of reducing worker injury through effective workplace design. Upon completion of this learning event, trainees will demonstrate knowledge of how to implement ergonomic principles in office settings to minimize or eliminate potential hazards. Trainees will learn to identify ergonomic risk factors at office workstations, identify basic ergonomic designs used to prevent injuries, and differentiate between the correct and incorrect methods to lift safely. This course is provided to help meet the requirements of OSHA Standard 29 CFR 1910.900. Related information is provided in courses such as Industrial Ergonomics and Back Injury Prevention.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify ergonomic risk factors at office workstations and their effects
Identify basic ergonomic designs used to prevent ergonomic injuries
Differentiate between correct and incorrect lifting methods
73
Title Office Safety, Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have the ability to identify common office hazards and describe recommended preventive measures.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify common hazards present in an office setting
Identify recommended controls that can be used to minimize or eliminate common hazards present in an office setting
Title OSHA Reporting and Recordkeeping
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize the Occupational Safety and Health Administration’s (OSHA’s) reporting and recordkeeping requirements for affected businesses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify OSHA’s general requirements for injury/illness reporting and recordkeeping
Identify OSHA’s definitions relating to its reporting and recordkeeping regulations
Identify OSHA’s required reporting forms
Identify the types of incidents OSHA requires to be reported
74
Title OSHA, Introduction
Estimated Duration (hours) 1.0
Description The Occupational Safety and Health Administration (OSHA) is the federal agency that creates safety regulations in U.S. workplaces. Upon completion of this learning event, trainees will demonstrate knowledge of OSHA’s role in the workplace and how it works to increase worker safety. Trainees will learn why OSHA was created, its goals and organizational structure, OSHA’s inspection and citation procedures, and what resources OSHA offers to workers. Related information is provided in the following courses: Occupational Safety and Health Programs, OSHA Reporting & Recordkeeping, Performing Safety Audits, and Job Safety Analysis.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Summarize an understanding of OSHA
Recognize the value of safety and health in the workplace
Identify the rights and responsibilities OSHA provides for employers and employees
Recall that OSHA conducts inspections and can issue citations and penalties
Recognize that there are basic reporting and recordkeeping requirements
Locate the OSHA phone number, web site, and other relevant references
Title Overhead and Gantry Crane Safety
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, crane operators, riggers, and general floor workers will demonstrate knowledge of the basics of overhead and gantry crane safety. Trainees will learn how to identify the differences between overhead and gantry cranes, how to recognize overhead and gantry crane hazards, and how to identify crane-related safe work practices. This course is intended to help meet OSHA Standard 29 CFR 1910.179.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify overhead and gantry crane hazards
Differentiate between overhead and gantry cranes and identify types of crane inspections
Recognize and describe safe work practices and prohibited activities
Identify and describe specific safe work practices for different crane attachments
Title Performing Safety Audits
Estimated Duration (hours) 0.25
Description Safety audits are a useful tool for companies to reduce workplace hazards and improve processes overall. Upon completion of this learning event, trainees will demonstrate knowledge of performing safety audits and an understanding of their benefits. Trainees will learn to define a safety audit; recognize their purpose, scope, and application; recognize audit procedures; and recognize the steps of audit protocol. This course is intended to aid the employer in addressing OSHA standard OSHA 29 CFR 1903.1, Inspections, Citations, and Proposed Penalties - Purpose and Scope. Related information is provided in the Incident Investigation, Industrial Hygiene, OSHA Introduction, and Job Safety Analysis courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Define internal safety audit types and focus
Recognize the purpose of safety audits
Recognize audit protocol and procedures
75
Title Personal Protective Equipment
Estimated Duration (hours) 0.5
Description Personal protective equipment (PPE) is a requirement for many different jobs. Upon completion of this learning event, trainees will demonstrate knowledge of the need for PPE, define the concept of a hazard assessment, describe things to consider when choosing PPE, and identify the different types of PPE used to protect all parts of the body. This course is intended to help meet the requirements of OSHA Standard 29 CFR 1910.132 through 138. Hands-on training will need to be provided in addition to this course. Related information is provided the Respiratory Protection and Hearing Conservation courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the need for PPE
Define and discuss the purpose of a hazard assessment
Describe considerations in selecting PPE
Identify elements of employee training for correct use of PPE
Identify types of eye and face protection and describe appropriate use
Identify types of head protection and describe appropriate use
Identify types of leg and foot protection and describe appropriate use
Identify types of body protection and describe appropriate use
Identify types of hearing protection and describe appropriate use
Title Radiation Safety
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will know how to identify the potential sources and types of radiation and their potential health effects.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the sources and characteristics of radiation
Identify types of radiation and their potential health effects
Identify basic safety considerations when working around radioactive materials
76
Title Respiratory Protection, Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of the basics of respiratory protection and how to use it on the job. Trainees will learn about potential inhalation hazards, the different respirator types and their uses, how to fit test a respirator mask, and respirator care and maintenance. This course is intended to help meet OSHA Standard 29 CFR 1910.134, Respiratory Protection. Workplace-specific information and hands-on training will need to be provided by the employer. Related information is provided in the Hazard Communication and Personal Protective Equipment courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Differentiate between types of controls
Recognize the potential inhalation hazards
Distinguish between and identify appropriate respirator types
Recognize different cartridges and their uses
Identify the different requirements of fit testing
Identify requirements for wearing respirators and care of respirators
Title Scaffold Safety, Basic
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will demonstrate knowledge of staying safe while working on scaffolds. Trainees will learn the definition of a scaffold; the potential hazards of working on a scaffold such as falls, electrocution, and scaffold collapses; and major hazard control methods to prevent them. This course is intended to help meet the requirements of OSHA Standard 29 CFR 1910.28. Related information is provided in courses such as the Fall Protection and Slips, Trips, and Falls.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Define the term “scaffold” and identify three types of scaffolds
Identify potential hazards of working on or near scaffolds
Identify methods to protect employees from fall hazards
Identify methods to protect employees from falling objects
Identify methods to protect employees from electrocution hazards
Identify methods to protect employees from scaffold collapse
Recognize safe work practices for scaffolds
Title Severe Weather Safety and Outdoor Work
Estimated Duration (hours) 0.25
Description Many jobs require outdoor work on a regular basis. Upon completion of this learning event, trainees will demonstrate knowledge of severe weather hazards and how to react when severe weather strikes during work processes. Trainees will learn to identify hazards associated with severe weather and standard protocols to follow during severe weather events. This course is intended to help meet the OSHA Standard 29 CFR General Duty Clause Section 5(a)(1). Related information is provided in courses such as the Cold Stress in the Workplace and Heat Stress in the Workplace.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify standard protocols concerning severe weather events
Identify the hazards of severe weather events and possible safe actions
77
Title Slips, Trips, and Falls
Estimated Duration (hours) 0.25
Description Slips, trips, and falls are a major source of injury in U.S. workplaces. Upon completion of this online course, trainees will demonstrate knowledge of slip, trip, and fall hazards and what they can do to minimize or eliminate those hazards. Trainees will learn to identify general OSHA safety requirements; recognize guarding for floor and wall openings; and recognize issues with stairways, ladders, scaffolds, and loading docks. They will also learn how personal behavior affects safety. This course is intended to help meet the requirements of OSHA Standards in 29 CFR 1910 Subpart D. Related information is provided in courses such as the Job Safety Analysis and Fall Protection.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify general requirements for protection from slips, trips, and falls
Recognize and select guarding of floor and wall openings
Recognize safety issues of steps and stairways
Recognize safety issues of ladders
Recognize safety issues of scaffolds
Recognize safety issues of loading docks
Recognize how personal behavior affects safety
Title Using Portable Fire Extinguishers
Estimated Duration (hours) 0.25
Description Fires can inspire panic, and knowing how to use a fire extinguisher beforehand can save precious seconds that could make all the difference in an emergency. Upon completion of this learning event, trainees will demonstrate knowledge of how and when to use different types of portable fire extinguishers. Trainees will learn how to recognize when to use a portable fire extinguisher, identify the three types of fire extinguishers, and identify the steps of the PASS technique. This course is intended to help meet the requirements of OSHA Standard 29 CFR 1910.157. Related information is provided in the Fire Safety, Emergency Response, and Flammable & Combustible Liquids courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize when to use a portable fire extinguisher
Identify the three types of portable fire extinguishers and their uses
Identify the steps of the PASS technique
Title Warehouse Safety
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will know how to identify common hazards associated with materials handling and other warehouse operations, and how to minimize or eliminate those hazards. This course is intended to aid the employer in meeting OSHA Standards 29 CFR 1910.23 and 176. Related information is provided in the Back Injury Prevention; Materials Handling; Slips, Trips, and Falls; and the various Forklift courses.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize lifting hazards and safe lifting techniques
Identify proper methods for safe material stacking
Identify proper methods for safe material handling and storage
Recall hazards and proper use of mechanical material handling equipment
78
US Onshore Oil and Gas Safety
Title Cold Stress
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to recognize the symptoms and effects of cold stress and identify cold stress prevention strategies.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize that cold stress can occur in certain workplace situations
Identify cold stress health effects and proper response
Identify methods that can prevent cold stress
Title Confined Space Awareness
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize hazards associated with confined space entry and identify OSHA’s associated required and recommended safe work practices.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify what constitutes a confined space
Recognize hazards found in confined spaces
Recognize methods used to control confined space hazards
Identify what constitutes a permit-required confined space
Recognize the role respiratory protection may take in confined space entry procedures
Identify OSHA’s training requirements regarding confined spaces entry
79
Title Excavation and Trenching
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to define a trench or excavation, recognize common hazards associated with trenches and excavations, and identify OSHA’s requirements for worker safety in and around trenches and excavations.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the OSHA regulations and definitions that apply to trenching and excavation
Recognize the potential hazards associated with excavation and trenching
Identify the responsibilities of the employee and competent person
Recognize and identify protective systems
Identify various safe work practices
Title Fall Protection
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to recognize common fall hazards on oil and gas sites and identify OSHA’s required safe work practices and associated safety equipment.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify passive fall protection methods
Recognize fall hazards on stairways
Recognize ladder hazards
Identify fall arrest systems and their components
Identify special situations
Title Fire Prevention
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize common fire hazards and sources of ignition on oil and gas sites and identify OSHA’s recommended safe work practices for preventing fires.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify common combustible/flammable materials on oil and gas sites
Identify common ignition sources on oil and gas sites
Identify controls used to protect combustible/flammable materials from ignition sources
Identify the different classes of fire and fire extinguishers
Identify when and how to fight an on-site fire with a portable fire extinguisher
80
Title Hazard Communication
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize the purpose and major components of a hazard communication program and its implementation in the workplace.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify types of chemical hazards and chemical routes of entry
Identify the purpose and requirements of a hazard communication program
Identify the sources of information for workplace chemical hazards
Identify the purpose and contents of material safety data sheets
Title Hearing Conservation
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to recognize the hazards of workplace noise and the role of engineering and administrative controls and personal protective equipment in preventing hearing loss.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Define noise and noise levels
Describe hearing loss and OSHA’s provisions to prevent it
Recognize personal hearing protection devices and their differences
Recall the basics of audiometric testing
81
Title Heat Stress
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to identify the causes of heat stress, the five graduated levels of heat disorder, and recommended first aid and prevention measures.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the causes of heat stress and the body’s natural temperature maintenance mechanisms
Identify the five graduated levels of heat stress and their appropriate first aid responses
Identify strategies for heat stress prevention
Title Hot Work - Arc Welding
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will have displayed the ability to recognize common hot work hazards on oil and gas production and exploration sites, and identify related safe work practices required by OSHA.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the types of hot work common on oil and gas sites and their hazards
Identify ways workers can protect themselves while performing hot work
Identify ways workers can protect the site from fire or explosion during hot work
Identify safety requirements for performing hot work on used containers
Identify safety requirements for performing hot work in confined spaces
82
Title Hydrogen Sulfide Safety
Estimated Duration (hours) 0.25
Description Hydrogen sulfide gas is a common hazard in the oil and gas industry. Upon completion of this learning event, trainees will demonstrate knowledge of the sources of hydrogen sulfide, its physical and chemical properties and effects on the body, hydrogen sulfide exposure controls, and exposure response. This course is intended to help meet the requirements of OSHA Standard 1910.1000 Table Z-2 and the General Duty Clause Section 5(a)(1).
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the physical and chemical properties of hydrogen sulfide
Recognize the effects of hydrogen sulfide on the body
Recognize information about hydrogen sulfide monitoring equipment
Identify basic hydrogen sulfide exposure controls
Identify proper hydrogen sulfide exposure response
Title Lockout/Tagout
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will have displayed the ability to recognize the purpose and basic requirements of lockout/tagout (LOTO) systems and worker responsibilities under a LOTO system.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the importance of proper LOTO procedures
Identify the difference between an authorized and affected person
Recognize the required tasks of the authorized employee during LOTO
Recognize the lock and tag requirements
Identify the special provisions of a LOTO system
83
Title Oil Rig Safety, Basic
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will know the basic terminology and operations associated with oil rigs. The trainee will recognize the basic function of an oil rig and its major stages of operation and recognize the major hazards of working on an oil rig. This course is intended to help meet the OSHA General Duty Clause Section 5(a)(1).
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize the basic function of an oil rig and its major stages of operation
Recognize the major hazards of working on an oil rig
Title Personal Protective Equipment
Estimated Duration (hours) 0.5
Description Upon completion of this learning event, trainees will have displayed the ability to recognize common hazards on oil and gas sites and identify the required and recommended personal protective equipment (PPE) necessary to mitigate those hazards.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Identify the need for PPE
Recognize the purpose of a hazard assessment
Identify considerations in selecting PPE
Identify elements of employee training for correct PPE use
Identify types of eye and face protection and their appropriate use
Identify types of head protection and their appropriate use
Identify types of leg and foot protection and their appropriate use
Identify types of hand and arm protection and their appropriate use
Identify types of body protection and their appropriate use
Identify types of respiratory protection and their appropriate use
Identify types of hearing protection and their appropriate use
Title Portable Fire Extinguishers
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to identify situations appropriate to the use of portable fire extinguishers and how to use them.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Recognize when to use a portable fire extinguisher
Identify the three types of portable fire extinguishers and their uses
Identify the steps of the PASS technique
84
Title Respiratory Protection
Estimated Duration (hours) 0.25
Description Upon completion of this learning event, trainees will display the ability to recognize common respiratory hazards on oil and gas exploration and production sites and their required safe work practices.
Objective(s) To successfully complete this course, the Learner will demonstrate the ability to:
Differentiate between types of controls
Recognize the potential inhalation hazards
Identify and distinguish between appropriate respirator types
Identify and distinguish between appropriate respirator styles
Recognize different cartridges and their use
Identify the different requirements of a seal check and fit testing
Identify requirements for wearing respirators and care of respirators
85
Seguridad - Version en Español
Title Bloqueo y Etiquetado/Lockout-Tagout
Estimated Duration (hours) 0.25
Description Al término de este curso, los aprendices demostrarán el conocimiento de cómo Bloquear/ Etiquetar programas de trabajo y los diferentes roles que deben jugar los empleados para hacer este programa exitoso. Los aprendices aprenderán a identificar la importancia de Bloquear/Etiquetar de manera apropiada estos procedimientos, el tipo de trabajadores que están autorizados para realizar estos procedimientos, las provisiones especiales de los programas de Bloqueo/ Etiquetado, y más. La intensión de este curso es para ayudar a cumplir con los Estándares de OSHA 29 CFR 1910.147. La información específica del lugar de trabajo deberá ser proporcionada por el empleador.
Objetivos Para completar exitosamente este curso, el Estudiante demostrará que tiene capacidad para:
Identificar la importancia de los procedimientos apropiados de Bloqueo/Etiquetado
Determinar quién es el personal autorizado para realizar Bloqueo/Etiquetado
Reconocer las tareas necesarias del empleado autorizado durante Bloqueo/Etiquetado
Reconocer los sistemas de cerradura y etiquetas para Bloqueo/Etiquetado
Identificar las provisiones especiales del sistema de Bloqueo/Etiquetado
86
Title Equipo Personal de Protección/Personal Protective Equipment
Estimated Duration (hours) 0.5
Description El equipo de protección personal (PPE) es un requisito para muchos tipos de trabajos. Al término de este curso los aprendices demostrarán conocimiento sobre la necesidad del PPE, definir el concepto de evaluación de peligro, las cosas que se tienen que considerar al escoger PPE, y los diferentes tipos de PPE usados para proteger todas las partes del cuerpo. La intensión de este curso es ayudar a cumplir con los Estándares de OSHA 29 CFR 1910.132 hasta 138. La práctica deberá ser proporcionada además de la teoría para este curso.
Objetivos Para completar exitosamente este curso, el Estudiante demostrará que tiene capacidad para:
Identificar la necesidad del equipo de protección personal
Definir y discutir el propósito de la evaluación del peligro
Describir las consideraciones para seleccionar el equipo de protección personal
Identificar los elementos de instrucción del empleado para el uso correcto de equipo de protección personal
Identificar los tipos de protección de ojos y cara y describir el uso apropiado
Identificar los tipos de protección de la cabeza y describir el uso apropiado
Identificar los tipos de protección de piernas y pies y describir el uso apropiado
Identificar los tipos de protección del cuerpo y describir el uso apropiado
Identificar los tipos de protección para la audición y describir el uso apropiado
87
Title Introducción a la Comunicación de Riesgos/Hazard Communication
Estimated Duration (hours) 0.5
Description La Comunicación del peligro es un estándar de OSHA que requiere a empleadores crear un programa dirigido al peligro de sustancias químicas en el lugar de trabajo. Al término de este curso, los aprendices demostrarán tener conocimiento acerca de los programas de Comunicación del Peligro. Los aprendices aprenderán acerca de los peligros de exposición química potencial, los tipos de peligros, y entender las Hojas de Datos del material de Seguridad, los métodos de detección química y cómo controlar peligros químicos. La intensión de este curso es ayudar a cumplir con los Estándares de OSHA 29 CFR 1910.1200.
Objetivos Para completar exitosamente este curso, el Estudiante demostrará que tiene capacidad para:
Reconocer las posibilidades de una exposición química potencial
Identificar los tipos de peligros
Identificar rutas de entrada y métodos de protección
Reconocer los métodos de evaluación de peligro
Identificar los elementos de las hojas de datos de los materiales de seguridad
Reconocer los métodos de detección química
88
API-U Programs API-U offers a number of pre-packaged programs intended to simplify the enrollment process and as a means to offer
significant enrollment discounts. Some packaged programs include combinations of related courses while other programs
are offered in conjunction with educational institutions as part of certificate programs that those educational institutions
offer.
All Courses
This program includes enrollment in all of API-U’s technical (Electrical Maintenance, Industrial Math & Science,
Instrumentation & Control, and Mechanical Maintenance) and safety courses (US General Industry Versions, Onshore Oil
and Gas Versions, and Seguridad – Versión en Español).
All Technical Courses
This program includes enrollment in all of API-U’s technical (Electrical Maintenance, Industrial Math & Science,
Instrumentation & Control, and Mechanical Maintenance) courses.
All Safety Courses
This program includes enrollment in all of API-U’s safety courses (US General Industry Versions, Onshore Oil and Gas
Versions, and Seguridad – Versión en Español).
Lean Learning for Oil and Gas Operations
The 76 Lean Learning for Oil and Gas Operations modules are only offered in a package format. Learners can enroll in
one of three packages, based on their role in the organization: Executive, Manager, or Practitioner. Based on the
package selected, Learners will be enrolled in the following modules:
Executive Package
5 Phases of Lean Transformation Lean Overview - Part IV Decoding the DNA of TPS Management Audit Systems Deep Dive Site Assessment Managing for Commitment Enterprise Assessment Numbers Game Going Lean in the Oil and Gas (Processing) Operations Organization Goal Setting Article Just Culture Process and Value Stream Mapping Kaizen Pre-assessment and Introduction Standardization and Standardized Work Lean Overview - Part I Turning Employees Into Problem Solvers Lean Overview - Part II Visual Management and Workplace Organization Lean Overview - Part III Waste Definition
89
Manager Package
5 Phases of Lean Transformation Lean Overview - Part I 5S Application Lean Overview - Part II Blue Sky Vision Workshop Preparation Lean Overview - Part III Communications Skills for Leaders Lean Overview - Part IV Conducting a Kaizen Event Management Audit Systems Core Leadership Skills Introduction Management Centers Decoding the DNA of TPS Managing for Commitment Deep Dive Site Assessment Managing in a Lean Environment Enterprise Assessment Numbers Game Error Proofing Organization Goal Setting Article Goals and Goal Setting Process and Value Stream Mapping Going Lean in the Oil and Gas (Processing) Operations Productivity Modeling Hoshin Kanri Standardization and Standardized Work How Kaizen Works Standardized Work Tools Just Culture The Checklist Just in Time Total Productive Maintenance Kaizen Pre-assessment and Introduction Turning Employees Into Problem Solvers Kamishibai Visual Management Kanban Visual Management and Workplace Organization Leader Daily Management/Front Line Supervision Waste Definition Leadership Behaviors Waste Pre-Assessment and Introduction Lean Layout Design Work Teams
Practitioner Package
5 Phases of Lean Transformation Lean Overview - Part IV 5S Application Man Machine Separation Andon Management Audit Systems Blue Sky Vision Workshop Preparation Management Centers Built in Quality Managing for Commitment Communication Skills for the Workplace Managing in a Lean Environment Communications Skills for Leaders Material Conveyance Conducting a Kaizen Event Meeting Facilitation Conflict Management Numbers Game Core Leadership Skills Introduction Organization Goal Setting Article Current State Maps Problem Solving Part I Decoding the DNA of TPS Problem Solving Part II Deep Dive Site Assessment Problem Solving Part III Demand Instruction Problem Solving Part IV Enterprise Assessment Problem Solving Part V Error Proofing Problem Solving Part VI Essential Elements of Communication Problem Solving Part VII External Logistics Problem Solving Part VIII Future State Maps Process and Value Stream Mapping Goals and Goal Setting Productivity Modeling Going Lean in the Oil and Gas (Processing) Operations Quick Changeover Heijunka Standard Inspection Hoshin Kanri Standardization and Standardized Work How Kaizen Works Standardization Post Assessment Inventory Management Standardized Work Tools Just Culture Supply Chain Just in Time The Checklist
90
Kaizen Pre-assessment and Introduction Total Productive Maintenance Kaizen Review and Post Assessment Turning Employees Into Problem Solvers Kamishibai Visual Management Kanban Visual Management and Workplace Organization Leader Daily Management/Front Line Supervision VSM Summary and Post Assessment Leadership Behaviors Waste Definition Lean Layout Design Waste Examples Lean Measurables Waste Identification Example and Post-Assessment Lean Overview - Part I Waste Walk Preview Exercise Lean Overview - Part II Waste Pre-Assessment and Introduction Lean Overview - Part III Work Teams
91
Program and Courseware Pricing For current program and courseware prices, please refer to the API-U/GP Strategies online store at
http://www.gpstrategies.com/shop/api-u/Home.aspx.
For more information, contact GP Strategies at:
1.866.319.9590 | +1.410.540.5351
Email [email protected] | Web www.api-u.org
Corporate Headquarters | GP Strategies Corporation
70 Corporate Center
11000 Broken Land Parkway, Suite 200
Columbia, Maryland 20144 USA, Suite 300 | Elkridge, MD 21075 USA
API, the API logo and API-U Logo are either trademarks or registered trademarks of API in the United States and/or other countries.
© 2012 GP Strategies Corporation. All rights reserved. GP Strategies and GP Strategies with logo design are trademarks of GP Strategies Corporation.
All other trademarks are trademarks or registered trademarks of their respective owners.
Ref Code: API-U Brochure 20121109 rev.docx