With Anviloy® 3D we can create inserts and cores with complex cooling channels. Unl now, this has only been possible with tool steel using 3D prinng technology. By combining Anviloy® 3D and Anviloy® Materials, which has up to 4x higher thermal conducvity than tool steel, extreme cooling rates can be achieved. This offers many important advantages. Precise temperature control Higher cooling rates More design opons No more drilling necessary Compeve costs Short delivery mes Opmized cooling Shorter cycle mes Less maintenance costs Higher cast quality Cost reducon Higher resistance against heats checks and longer lifeme 6 Advantages of this technology 6 Advantages for the customer Weldstone GmbH Kunstmuehlstr. 12 3D Anviloy® 3D - The conformal cooling soluon
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
With Anviloy® 3D we can create inserts and cores with complex cooling channels. Un�l now, this has only been possible with tool steel using 3D prin�ng technology.By combining Anviloy® 3D and Anviloy® Materials, which has up to 4x higher thermal conduc�vity than tool steel, extreme cooling rates can be achieved. This offers many important advantages.
Precise temperature control Higher cooling rates More design op�ons No more drilling necessary Compe��ve costs Short delivery �mes
Op�mized cooling Shorter cycle �mes Less maintenance costs Higher cast quality Cost reduc�on Higher resistance against heats checks and longer life�me
6 Advantages of this technology
6 Advantages for the customer
Weldstone GmbHKunstmuehlstr. 12D - 83026 RosenheimGermany
3D
Anviloy® 3D - The conformal cooling solu�on
Sprue posts Cooling inserts Shot Blocks Combus�on chamber inserts
Typical Applica�ons
Weldstone GmbHKunstmuehlstr. 12D - 83026 RosenheimGermany
3D
Americas
Contact:Ross Wayman
Astaras Inc.6901 Bryan Dairy Road, Suite 160Largo, FL 33777, USA
Tel.: +1 727-515-9225Tel.: +1 727-546-9600Fax : +1 727-546-9699E-Mail: [email protected]: www.astaras.net
Europe, Asia, Australia
Contact:Andreas Endemann, Thomas Hoehn
Weldstone GmbHKunstmuehlstrasse 12D- 83026 Rosenheim
Germany
Tel.: +49 8031 -94 13 99-0Fax: +49 8031 -94 13 99-09
E-Mail: [email protected]: www.weldstone.com
Iden�fy the requirements of a die Analyze the technical requirements for the Anviloy® 3D product Dra� a design of the poten�al Anviloy® 3D product Create 3D data of the design Check feasibility and propose final design of the Anviloy® 3D product Order the Anviloy® 3D product
6 steps to Anviloy® 3D products
Sprue post
Cooling insert
Related Documents
