• Hose clamp • Clevis • Stainless steel screws / locking hex nuts • Hose (not included) HIGHLIGHTS • Compatible with both 5/8” and 3/4” hoses. • Includes rubber insert for 5/8” hose installations. • Resists hose slippage caused by excessive use. • Two-piece clamshell design with durable glass-filled nylon construction. • Works with retractor systems, whether as a factory- installed dispenser option or as an after market field retrofit to islands. • Swiveling clevis provides freedom of movement. Anti-kink hose clamps help to prevent costly hose replacements and fines that damaged hoses can lead to. The clamp provides a five-point bolt-down system to fully secure the hose into place and prevent it from sliding out of position and coming into contact with the ground. Anti-kink hose clamps keep hoses up off the pavement and islands, and away from vehicle tires. Hose run-overs can inflict permanent damage leading to obstructed fuel and vapor flow paths and unnecessary forecourt hazards. ANTI-KINK HOSE CLAMPS SPECIFICATIONS Components 1 2 4 HOSE ACCESSORIES franklinfueling.com 3760 Marsh Rd. • Madison, WI 53718, USA Tel: +1 608 838 8786 • Fax: +1 608 838 6433 Tel: USA & Canada +1 800 225 9787 • Tel: UK +44 (0) 1473 243300 Tel: Mex 001 800 738 7610 • Tel: DE +49 6571 105 308 • Tel: CN +86 10 8565 4566 © 2018 Franklin Fueling Systems, LLC. All Rights Reserved. FFS-0645 02-18 Model Description 407924901 Anti-kink hose clamp for 5/8” and 3/4” hoses. ORDERING INFORMATION 1 2 3 3 4 Note: The hose clamp includes a rubber insert for 5/8” hose installations, standard 3/4” hose does not require this insert for installation.