Antenna

790 – 2200 MHzBase Station Antennasfor Mobile Communications

Antennen . Electronic

“Quality leads the way”Being the oldest and largest antenna manufacturer worldwide, we take on every daythe challenge arising from our own motto. One of our basic principles is to look alwaysfor the best solution in order to satisfy our customers.Our quality assurance system conforms to DIN EN ISO 9001 and applies to the productrange of the company: Antenna systems, communication products as well as activeand passive distribution equipment.

2

Please note:As a result of more stringent legal regulations and judgements regarding product liability, we areobliged to point out certain risks that may arisewhen products are used under extraordinaryoperating conditions.

The mechanical design is based on the environmentalconditions as stipulated in ETS 300 019-1-4, whichinclude the static mechanical load imposed on anantenna by wind at maximum velocity.

Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain causedby oscillating support structures), may result in thebreakage of an antenna or even cause it to fall to the ground.

These facts must be considered during the site planningprocess.

The details given in our data sheets have to befollowed carefully when installing the antennas andaccessories.

The installation team must be properly qualified and also be familiar with the relevant national safetyregulations.

Photo on title page: XPol-Panel with cut through 3-dimensional farfield diagram of radiation pattern.

Catalogue Issue 01/01

All data published in previous catalog issues hereby becomes invalid.We reserve the right to make alterations in accordance with the requirements of our customers.

3

XPol F-Panels harmonically adapted to existing decoration elements on a roof-top in Bavaria/Germany.

4

List of available catalogues forMobile Communication Antennas and Accessories

– 790 – 2200 MHz Base Station Antennas– 27 – 512 MHz Base Station Antennas

– Ground-to-Air Communication Antennas

– Antennas for Trains and Buses

– 80 / 160 MHz Filters, Combiners, Amplifiers for Mobile Communication– 450 MHz Filters, Combiners, Amplifiers for Mobile Communication– 900 / 1800 MHz Filters, Combiners, Amplifiers for Mobile Communication

Base Station Antennasfor Mobile Communication

Networks:

GSM 900NMTTACSAMPSCDMAGSM 1800PCSDECTUMTSWLL

The listed catalogues

are also

available on CD-ROM

5

Kathrein AntennasProduct Description (Type)

XXPol A-Panel 900/1800 C 65°/60° 17.5/18dBi 2°–8°T/2°T

Polarization(s):(X) Dual +45°/–45°(V) Vertical

Antenna Family

Frequency Range(s)

Integrated Combiner

HorizontalHalf-power Beam Width(s)

Gain Value(s)

Fixed / Variable Electrical Tilt(s)

6

Summary of Types

The articles are listed by type number in numerical order.

733 ...

733 677 169 ...

733 678 169 ...

733 679 169 ...

733 680 169 ...

733 695 77 ...

733 736 77 ...

734 ...

734 304 114

734 310 114

734 314 116

734 318 117

734 319 117

734 320 117

734 328 118

734 330 118

734 342 119

734 360 175

734 361 175

734 362 175

734 363 175

734 364 175

734 365 175

735 ...

735 141 115

735 147 116

735 700 180

735 727 76

735 811 85

736 ...

736 016 115

736 077 104

736 078 106

736 347 129

736 348 129

736 349 132

736 350 126

736 351 126

736 352 131

736 361 144

736 618 100

736 622 89

736 624 141

736 668 90

736 801 155 ...

736 802 155 ...

736 803 155 ...

736 804 155 ...

736 805 155 ...

736 854 89

736 855 89

736 858 90

736 863 93

736 864 93

736 866 95

736 900 101

736 902 101

736 935 143

737 ...

737 031 142

737 190 136

737 303 157

737 304 157

737 305 157

737 306 157

737 307 157

Type No. Page Type No. Page Type No. Page Type No. Page

728 ...

728 684 78

728 685 77

730 ...

730 360 82

730 368 83

730 370 91

730 374 99

730 376 87

730 378 96

730 380 98

730 382 100

730 676 82

730 677 82

730 691 84

731 ...

731 651 169

732 ...

732 317 178

732 318 178

732 319 179

732 321 178

732 322 178

732 327 178

732 433 87

732 447 82

732 448 83

732 480 91

732 689 88

732 690 85

732 691 83

732 967 91

737 308 157

737 385 99

737 398 183

737 547 86

737 548 88

737 549 97

737 735 84

737 849 102

737 906 103

737 965 159

737 966 159

737 967 159

737 971 171 ...

737 972 170 ...

737 973 170 ...

737 974 170 ...

737 975 170 ...

737 976 171

737 978 170 ...

738 ...

738 018 107

738 020 108

738 021 108

738 144 109

738 187 135

738 192 128

738 407 84

738 440 181

738 445 65

738 446 65 ...

738 449 133 ...

738 450 123 ...

738 454 137 ...

738 546 169 ...

738 573 146

738 580 105

738 664 132

738 779 130

738 908 182

739 ...

739 129 112

739 131 112

739 134 113

739 136 113

739 404 135

739 418 96

739 489 37 ...

739 490 38

739 491 38

739 494 39

739 495 40

739 496 40

739 498 42

739 619 18

739 620 18

739 622 19

739 623 21

739 624 24

739 630 23

739 632 19

739 633 20

739 634 21

739 635 23

739 636 24

739 637 25

739 638 32

739 639 33

739 640 34

739 643 20

739 646 27

739 648 27

739 649 30

739 650 31

739 651 26

739 655 29

739 658 28

739 660 30

739 662 31

739 695 43

739 698 44

739 707 45

739 708 45

739 710 47

739 785 134

739 854 86

739 856 100

739 927 36

739 990 81

741 ...

741 067 94

741 214 44

741 264 39

741 316 52

741 320 54

741 322 56

741 324 58

741 325 53

741 326 55

741 327 57

741 328 59

741 336 60

741 344 61

741 493 103

741 558 127

741 571 148

741 572 148

741 622 22

741 623 36

741 717 16

741 718 16

741 784 48 ...

741 785 17

741 790 138

741 794 41 ...

741 880 66

741 987 46 ...

741 989 49 ...

742 ...

742 033 167

742 034 167

742 035 167

742 036 167

742 047 64

742 113 176

742 149 147

742 150 92

742 151 62

742 152 63

K 61 ...

K 61 14 02 76

K 61 14 03 76 ...

K 61 14 04 76 ...

K 61 14 05 76 ...

K 61 33 5 184

K 61 33 6 184

K 63 ...

K 63 20 62 1 155

K 63 20 62 7 155

K 63 20 63 1 155

K 63 20 63 7 155

K 63 20 64 1 155

K 63 20 64 7 155

K 63 22 62 1 158

K 63 22 63 1 158

K 63 22 64 1 158

K 63 23 60 61 160

K 63 23 60 67 161

K 63 23 61 01 160

K 63 23 61 07 161

K 63 23 61 51 160

K 63 23 61 57 161

K 63 55 8 156

K 63 56 8 156

K 73 ...

K 73 22 67 80

K 73 45 64 7 79

K 75 ...

K 75 11 61 124

K 75 11 67 124

K 75 15 64 1 125

K 75 15 64 7 125

Summary of Types

The articles are listed by type number in numerical order.

Type No. Page Type No. Page Type No. Page Type No. Page

7

8

Directional antenna designs:A-PanelsThe Advanced Antenna Technology for Cross Polarization

Compact design Small size and elegant design characterizethis new antenna familiy.

Closed fiberglass housing The fiberglass housing totally covers theinternal antenna components. The specialdesign reduces the sealing areas to aminimum and guarantees the best weatherprotection.

Environmental influences The design of Kathrein antennas is based onfundamental engineering knowledge and alsoon decades of practical experience, duringwhich the various constructions and materialsused have proved their outstanding reliability.

Environmental conditions Kathrein cellular antennas are designed tooperate under the environmental conditionsas described in ETS 300 019-1-4 class 4.1 E.The antennas exceed this standard withregard to the following items:– Low temperature: – 55 °C– High temperature (dry): + 60 °C

Environmental tests Kathrein antennas have passed environ-mental tests as recommended in ETS 300 019-2-4.The homogenous design of Kathrein’santenna families use identical modules andmaterials. Extensive tests have beenperformed on typical samples and modules.

Long service life According to our own experience, the out-standing mechanical characteristics ofKathrein antennas result in an antennaservice life of over 15 years.

65° and 90° half-power The customer can choose from 65° and 90°beam width half-power beam widths.Large variety of gain values Gain values from 7.5 dBi up to 18 dBi, and Electrical downtilt electrical downtilts of up to 12° are available.

Low intermodulation After many years of experience in the construction of antennas and after products (typically –150 dBc) intensive research into the effects of intermodulation, we have been able

to optimize the material used for A-Panels (the given value refers to 3rdorder products measured with 2 carriers of 20 W each).

Broadband design These antennas primarily cover the frequency range from 806 to 960 MHz,and are also used for Dual-band antennas. Therefore the variety ofantennas used can be kept to a minimum.

Excellent grounding The A-Panels are DC grounded according EN 50083-1. The innerconductors are DC grounded.

Multi-functional All models are equipped with 2 fixing points. The A-Panels can be wallinstallation hardware mounted without any additional hardware. For mast mounting, stainless

steel brackets and mechanical downtilt kits are available. To assist theinstallation technicians in aligning the antennas, an azimuth adjustment toolcan be supplied (see Accessories).

9

Directional antenna designs:Eurocell Panels (Panels)The Approved Antenna Family for Vertical Polarization

Compact, elegant design Small size and elegant design are thedistinguishing features of this antenna family,characteristics which predestine theseantennas for use in modern cellular networks.

Fiberglass radome The grey fiberglass radomes of these antennasare very stable and extraordinarily stiff. Theyare resistant to ultraviolet radiation and canalso be painted to match their surroundings.


Environmental conditions Kathrein cellular antennas are designed tooperate under the environmental conditions asdescribed in ETS 300 019-1-4 class 4.1 E.The antennas exceed this standard withregard to the following items:– Low temperature: – 55 °C– High temperature (dry): + 60 °C

Environmental tests Kathrein antennas have passed environmentaltests as recommended in ETS 300 019-2-4.The homogenous design of Kathrein’s antennafamilies use identical modules and materials.Extensive tests have been performed ontypical samples and modules.

Long service life According to our own experience, the out-standing mechanical characteristics ofKathrein antennas result in an antenna servicelife of over 15 years.

Large variety of half-power The customer can choose from more than beam widths and gains 75 versions, e.g. different half-power beam-

widths of 65°, 90°, 105°, 120° and 160°, Electrical downtilt gain values from 6.5 to 18.5 dBi and electrical

downtilts of up to 15°.

Low intermodulation After many years’ experience in the construction of antennas and after products (typically –150 dBc) intensive research into the effects of intermodulation, we have been able

to optimize the material used for Eurocell panels (the given value refers to 3rd order products measured with 2 carriers of 20 W each).

Broadband design 2 groups of antennas are available for the frequency ranges: 870 – 960 MHz,optimized for GSM, 806 – 960 MHz, for other cellular networks.

Excellent grounding The Eurocell Panels are DC grounded according EN 50083-1. The innerconductors are DC grounded for DC loop monitoring.

Multi-functional Depending on their length, the antennas are equipped with up to 3 fixing installation hardware points. The Eurocell Panels can be wall mounted without any additional

hardware. For mast mounting, stainless steel brackets and mechanicaldowntilt kits are available. To assist the installation technicians in aligning theantennas, an azimuth adjustment tool can be supplied (see Accessories).

10

Directional antenna designs:F-PanelsHarmony of Design and Technology

Slim, unobtrusive design This antenna family is especially suitable for installation atoptically sensitive sites.

Flat fiberglass radome The max. radome depth is only 69 mm. Fiberglass materialguarantees optimum performance with regards to stability,stiffness, UV resistance and painting. The colour of theradome is grey.

Environmental influences The design of Kathrein antennas is based on fundamentalengineering knowledge and also on decades of practicalexperience, during which the various constructions andmaterials used have proved their outstanding reliability.

Environmental conditions Kathrein cellular antennas are designed to operate underthe environmental conditions as described in ETS 300 019-1-4 class 4.1 E.The antennas exceed this standard with regard to thefollowing items:– Low temperature: – 55 °C– High temperature (dry): + 60 °C

Environmental tests Kathrein antennas have passed environmental tests asrecommended in ETS 300 019-2-4.The homogenous design of Kathrein’s antenna familiesuse identical modules and materials. Extensive tests havebeen performed on typical samples and modules.

Long service life According to our own experience, the outstandingmechanical characteristics of Kathrein antennas result inan antenna service life of over 15 years.

Patented, gain-optimized The reduction of the number of components down to justradiating system a few multi-functional parts has reduced the number of

electrical and mechanical connection points, thus also Low intermodulation reducing the intermodulation products (the indicated value products (typically –150 dBc) refers to 3rd order products measured with 2 carriers of

20 W each).

Large variety of half-power Versions with half-power beam widths of 33° to 200° are beam widths and gains available (with an additional subreflector). Various gain Electrical downtilt values of up to 22 dBi and electrical downtilt options will

aid network planners to select the version most suitable for the intended purpose.

Excellent grounding The F-Panels are DC grounded according EN 50083-1.The inner counductors are DC grounded for DC loopmonitoring.

Multi-functional The F-Panels can be wallinstallation hardware mounted without any additional

hardware. For mast mounting,stainless steel brackets andmechanical downtilt kits areavailable. To assist the installa-tion technicians in aligning theantennas, an azimuth adjust-ment tool can be supplied (see Accessories).

11

Directional antenna designs:Special Directional AntennasFor Particular Applications

Antennas for

– tunnel use

– railway use

– micro cells (street use)

– high gain link for repeaters

The distinguishing features of these special versions,e.g. parabolic panels or log. periodic antennas, are:

– very small half-power beam width (high gain)

– high sidelobe suppression

– also Dual-band and Multi-band versions

– bidirectional horizontal pattern.

LogPer ParPanel

BiDir

12

13

Directional AntennasDual Polarization +45°/–45° 800/900 MHz

Dual Polarization +45°/–45°, Adj. el. downtilt 800/900 MHz

Directional AntennasDual Polarization +45°/–45° 1800/1900/2000 MHz

Dual Polarization +45°/–45°, Adj. el. downtilt 1800/1900/2000 MHz

Directional AntennasDual-band, Dual Polarization +45°/–45° 900/1800 MHz

Dual-band, Dual Polarization +45°/–45°, Adj. el. downtilt 900/1800 MHz

Dual-band, Vertical Polarization 800/900/1800/2000 MHz

Vertical Polarization 800/900 MHz

Vertical Polarization, Adj. el. downtilt 800/900 MHz

Vertical Polarization, Multi-unit 900 MHz

Directional AntennasDual Polarization +45°/–45° UMTS (IMT 2000)

Directional AntennasVertical Polarization 1800/1900 MHz

Directional Antennas

Single-band 900/1800 MHz

Multi-band 800/1900/2000 MHz

Indoor / Outdoor 900/1800/2000 MHz

Indoor Antennas

Power Splitters and Tappers

Accessories

Vertical Polarization 800/900 MHz

Dual-band, Vertical Polarization 900/1800 MHz

Vertical Polarization 1800 MHz

Vertical Polarization 2000 MHz

Omnidirectional Antennas

14

15

XPol A-Panel 824–960 65° 15 dBi 2°–12°T 739 638 824 – 960 1296 bottom 32XPol A-Panel 824–960 65° 16.5 dBi 2°–10°T 739 639 824 – 960 1996 bottom 33XPol A-Panel 806–960 65° 17.5 dBi 0°–17°T 739 640 806 – 960 2580 bottom 34

XPol A-Panel 900 30° 15.5 dBi 741 717 870 – 960 656 bottom 16XPol A-Panel 900 30° 18.5 dBi 741 718 870 – 960 1296 bottom 16XPol A-Panel 900 30° 21 dBi 741 785 870 – 960 2580 bottom 17

XPol A-Panel 806–960 65° 9 dBi 739 619 806 – 960 256 bottom or top 18

XPol A-Panel 806–960 65° 12.5 dBi 739 620 806 – 960 656 bottom or top 18

XPol A-Panel 806–960 65° 15.5 dBi 739 622 806 – 960 1296 bottom or top 19XPol A-Panel 806–960 65° 15 dBi 6°T 739 632 806 – 960 1296 bottom 19XPol A-Panel 806–960 65° 15 dBi 9°T 739 643 806 – 960 1296 bottom 20XPol A-Panel 806–960 65° 15 dBi 12°T 739 633 806 – 960 1296 bottom 20

XPol A-Panel 806–960 65° 17 dBi 739 623 806 – 960 1936 bottom or top 21XPol A-Panel 806–960 65° 17 dBi 6°T 739 634 806 – 960 1936 bottom 21XPol A-Panel 824–960 65° 17 dBi 9°T 741 622 806 – 960 1936 bottom 22XPol A-Panel 900 65° 17 dBi 6°T 739 635 880 – 960 2256 bottom 23

XPol A-Panel 900 65° 18 dBi 739 630 870 – 960 2580 bottom 23XPol A-Panel 806–960 65° 18 dBi 739 624 806 – 960 2580 bottom 24XPol A-Panel 806–960 65° 18 dBi 6°T 739 636 806 – 960 2580 bottom 24XPol A-Panel 806–960 65° 18 dBi 9°T 739 637 806 – 960 2580 bottom 25

XPol A-Panel 900 90° 7.5 dBi 739 651 870 – 960 256 bottom or top 26

XPol A-Panel 806–960 90° 11 dBi 739 646 806 – 960 656 bottom or top 27

XPol A-Panel 806–960 90° 13.5 dBi 739 648 806 – 960 1296 bottom or top 27XPol A-Panel 806–960 90° 13.5 dBi 6°T 739 658 806 – 960 1296 bottom 28

XPol A-Panel 900 90° 15.5 dBi 739 655 870 – 960 1936 bottom or top 29XPol A-Panel 806–960 90° 15.5 dBi 739 649 806 – 960 1936 bottom or top 30XPol A-Panel 806–960 90° 15.5 dBi 6°T 739 660 806 – 960 1936 bottom 30

XPol A-Panel 806–960 90° 17 dBi 739 650 806 – 960 2580 bottom or top 31XPol A-Panel 806–960 90° 17 dBi 6°T 739 662 806 – 960 2580 bottom 31

Type Type No. Frequency Height Connector Page range [MHz] [mm] position

Summary – Directional AntennasDual Polarization +45°/–45°800/900

Dual Polarization +45°/–45°

Dual Polarization +45°/–45°Adjustable Electrical Downtilt

New Products

New Products

16Mounting accessories are not included in the scope of delivery (see page 168)

A-PanelDual PolarizationHalf-power Beam Width

900

X

30°

741 717Type No.

Frequency range 870 – 960 MHz

Polarization +45°, –45°

Gain 2 x 15.5 dBi

Half-power beam width Horizontal: 30°Copolar +45°/ –45° Vertical: 27°

Front-to-back ratio, copolar > 30 dB

Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5

Intermodulation IM3 < –150 dBc(2 x 43 dBm carrier)

Max. power per input 500 Watt (at 50 °C ambient temperature)

Input 2 x 7-16 female

Connector position Bottom

Weight 13 kg

Wind load Frontal: 330 N (at 150 km/h)

Max. wind velocity 200 km/h

Height/width/depth 656 / 560 / 116 mm

XPol A-Panel 900 30° 15.5dBi

Horizontal Pattern

10

3

0

30°

dB

Vertical Pattern

3

0

10

dB

27°

900–45°

900+45°

7-16 7-16

741 718Type No.



Gain 2 x 18.5 dBi



Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5





Weight 20 kg





Horizontal Pattern

10

3

0

30°

dB

Vertical Pattern

10

3

0

15°

dB

17Mounting accessories are not included in the scope of delivery (see page 168)


900

X

30°

900–45°

900+45°

7-16 7-16

741 785Type No.



Gain 2 x 21 dBi



Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5





Weight 40 kg




XPol A-Panel 900 30° 21dBi

Horizontal Pattern

10

3

0

30°

dB

Vertical Pattern

dB

10

3

0

7°

18Mounting accessories are not included in the scope of delivery (see page 166 – 171)


806–960

X

65°

739 619Type No.

Frequency range806 – 880 MHz 880 – 960 MHz

Polarization +45°, –45° +45°, –45°

Gain 2 x 8.5 dBi 2 x 9 dBi

Half-power beam width Horizontal: 70° Horizontal: 65°Copolar +45°/ –45° Vertical: 70° Vertical: 68°

Front-to-back ratio, copolar > 27 dB > 27 dB

Cross polar ratioMaindirection 0° Typically: 25 dB Typically: 25 dBSector ±60° > 10 dB > 10 dB

Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5




Connector position Bottom or top

Weight 3 kg




XPol A-Panel 806–960 65° 9dBi

806–960

Horizontal Pattern

10

3

0

65°125°

dB

Vertical Pattern

dB

68°

10

3

0

800/900–45°

800/900+45°

7-16 7-16

739 620Type No.


Polarization +45°, –45° +45°, –45°

Gain 2 x 12 dBi 2 x 12.5 dBi



Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5





Weight 6 kg




XPol A-Panel 806–960 65° 12.5dBi

806–960

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern

3

0

10

dB

27°



806–960

X

65°

800/900–45°

800/900+45°

7-16 7-16

739 622Type No.


Polarization +45°, –45° +45°, –45°




Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.4





Weight 10 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern

10

3

0

15°

dB

739 632Type No.


Polarization +45°, –45° +45°, –45°



Electrical tilt 6°, fixed 6°, fixed

Sidelobe suppression for ≥ 14 dB ≥ 16 dBfirst sidelobe above horizon


Isolation > 30 dB > 32 dB

Impedance 50 Ω 50 Ω

VSWR < 1.5 < 1.3





Weight 8 kg




XPol A-Panel 806–960 65° 15dBi 6°T

806–960

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern6° electr. downtilt

10

3

0

15°

dB


739 643Type No.


Polarization +45°, –45° +45°, –45°








VSWR < 1.5 < 1.3





Weight 8 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0


10

3

0

15°

dB


X

65°

806–960

739 633Type No.


Polarization +45°, –45° +45°, –45°








VSWR < 1.5 < 1.3





Weight 8 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0


10

3

0

16°

dB

800/900–45°

800/900+45°

7-16 7-16



X

65°

806–960

739 623Type No.


Polarization +45°, –45° +45°, –45°


Half-power beam width Horizontal: 68° Horizontal: 65°Copolar +45°/ –45° Vertical: 10° Vertical: 9.5°

Sidelobe suppression for ≥ 15 dBfirst sidelobe above horizon


Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5





Weight 12 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern

first null-fill below horizon better or equal –25 dBbelow maximum gain

9.5°

dB

10

3

0

739 634Type No.


Polarization +45°, –45° +45°, –45°




Sidelobe suppression for ≥ 14 dB ≥18 dBfirst sidelobe above horizon




VSWR < 1.5 < 1.3



Input 7-16 female


Weight 12 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0


9.5°

dB

10

3

0

800/900–45°

800/900+45°

7-16 7-16


A-PanelDual PolarizationHalf-power Beam WidthFixed Electrical Downtilt

X

65°

9°

824–960

741 622Type No.


Polarization +45°, –45° +45°, –45°




Sidelobe suppression for ≥ 14 dB ≥16 dBfirst sidelobe above horizon




VSWR < 1.5 < 1.3





Weight 12 kg





824–960

Horizontal Pattern

65°120°

dB

10

3

0


9.5°

dB

10

3

0

800/900–45°

800/900+45°

7-16 7-16



X

65°

900

739 635Type No.



Gain 2 x 17 dBi

Half-power beam width Horizontal: 65°Copolar +45°/ –45° Vertical: 8.5°

Electrical tilt 6°, fixed

Sidelobe suppression ≥ 20 dBabove horizon (0°– 40°)


Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.3





Weight 16 kg




XPol A-Panel 900 65° 17dBi 6°T

Horizontal Pattern

65°120°

dB

10

3

0


8.5°

dB

10

3

0

900–45°

900+45°

7-16 7-16

739 630Type No.



Gain 2 x 18 dBi




Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.3





Weight 19 kg




XPol A-Panel 900 65° 18dBi

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern


7°

dB

10

3

0



X

65°

806–960

739 624Type No.


Polarization +45°, –45° +45°, –45°


Half-power beam width Horizontal: 68° Horizontal: 65°Copolar +45°/ –45° Vertical: 7.5° Vertical: 7°



Impedance 50 Ω

VSWR < 1.5





Weight 19 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern

7°

dB

10

3

0

800/900–45°

800/900+45°

7-16 7-16

739 636Type No.


Polarization +45°, –45° +45°, –45°






Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5 < 1.3





Weight 19 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0


7°

dB

10

3

0



X

65°

9°

806–960

739 637Type No.


Polarization +45°, –45° +45°, –45°




Sidelobe suppression for better 18 dB below maximum gainfirst sidelobe above horizon


Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5 < 1.3





Weight 19 kg





806–960

Horizontal Pattern

65°120°

dB

10

3

0


7.5°

dB

10

3

0

800/900–45°

800/900+45°

7-16 7-16



900

X

90°

739 651Type No.



Gain 2 x 7.5 dBi



Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.3





Weight 3 kg





Horizontal Pattern

3

0

dB

90°180°

Vertical Pattern

dB

70°

10

3

0

900–45°

900+45°

7-16 7-16



X

90°

806–960

739 646Type No.


Polarization +45°, –45° +45°, –45°





Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5





Weight 6 kg





806–960

Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern

3

0

10

dB

36°

739 648Type No.


Polarization +45°, –45° +45°, –45°





Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5





Weight 10 kg





806–960

Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern

10

3

0

15°

dB

800/900–45°

800/900+45°

7-16 7-16



X

90°

6°

806–960

739 658Type No.


Polarization +45°, –45° +45°, –45°






Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5 < 1.3





Weight 8 kg




XPol A-Panel 806–960 90° 13.5dBi 6°T

806–960

Horizontal Pattern

3

0

dB

90°170°


10

3

0

15°

dB

800/900–45°

800/900+45°

7-16 7-16



900

X

90°

739 655Type No.



Gain 2 x 15.5 dBi




Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.3





Weight 14 kg





Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern


10°

dB

10

3

0

900–45°

900+45°

7-16 7-16



X

90°

806–960

739 649Type No.


Polarization +45°, –45° +45°, –45°





Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5





Weight 12 kg





806–960

Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern


9.5°

dB

10

3

0

739 660Type No.


Polarization +45°, –45° +45°, –45°






Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5 < 1.3





Weight 14 kg




XPol A-Panel 806–960 90° 15.5dBi 6°T

806–960

Horizontal Pattern

3

0

dB

90°170°


9.5°

dB

10

3

0

800/900–45°

800/900+45°

7-16 7-16



X

90°

806–960

739 650Type No.


Polarization +45°, –45° +45°, –45°





Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5





Weight 19 kg





806–960

Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern


7°

dB

10

3

0

739 662Type No.


Polarization +45°, –45° +45°, –45°






Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5 < 1.3





Weight 19 kg





806–960

Horizontal Pattern

3

0

dB

90°170°


7°

dB

10

3

0

800/900–45°

800/900+45°

7-16 7-16


A-PanelDual PolarizationHalf-power Beam WidthAdjust. Electr. Downtilt



Adjustment 1x, Position bottommechanism continously adjustable

Weight 12 kg

Wind load Frontal: 230 N (at 150 km/h)Lateral: 130 N (at 150 km/h)Rearside: 500 N (at 150 km/h)


Packing size 1422 x 287 x 165 mm


Mechanical specificationsHorizontal Pattern Vertical Pattern2°–12° electrical downtilt

continously adjustable

10

3

0

65°125°

dB

10

3

0

14.5°

dB

880 – 960 MHz: +45°/–45° Polarization

Horizontal Pattern Vertical Pattern2°–12° electrical downtilt


10

3

0

68°130°

dB

10

3

0

15.5°

dB


824–960

X

65°

2°–12°

800/900–45°

800/900+45°

7-16 7-16

739 638Type No.


Polarization +45°, –45° +45°, –45°

Gain 14.5 dBi 15 dBi

Half-power beam width Horizontal: 68° Horizontal: 65°Copolar +45°/ –45° Vertical: 15.5° Vertical: 14.5°

Electrical tilt 2°–12°, adjustable 2°–12°, adjustable

Sidelobe suppression for 2° ... 6° ... 10° ... 12° T 2° ... 6° ... 10° ... 12° Tfirst sidelobe above horizon 16 ... 14 ... 11 ... 10 dB 20 ... 20 ... 16 ... 14 dB



Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5



XPol A-Panel 824–960 65° 15dBi 2°–12°T

824–960


739 639Type No.





Weight 17 kg





Mechanical specifications


Polarization +45°, –45° +45°, –45°



Electrical tilt 2°–10°, adjustable 2°–10°, adjustable




Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5



XPol A-Panel 824–960 65° 16.5dBi 2°–10°T



10

3

0

65°125°

dB

9.5°

dB

10

3

0




10

3

0

68°130°

dB

10°

dB

10

3

0


X

65°

2°–10°

824–960–45°

824–960+45°

7-16 7-16

824–960

824–960






Weight 22 kg





Mechanical specificationsHorizontal Pattern Vertical Pattern0°– 7° electrical downtiltcontinously adjustable

10

3

0

65°125°

dB

7°

dB

10

3

0


Horizontal Pattern Vertical Pattern0°– 7° electrical downtiltcontinously adjustable

10

3

0

68°130°

dB

7.5°

dB

10

3

0


X

65°

0°– 7°

806–960–45°

806–960+45°

7-16 7-16

806–960

739 640Type No.


Polarization +45°, –45° +45°, –45°



Electrical tilt 0°– 7°, adjustable 0°– 7°, adjustable




Isolation > 32 dB

Impedance 50 Ω

VSWR < 1.5



XPol A-Panel 806–960 65° 17.5dBi 0°–7°T

806–960

35

XPol F-Panel 1710–2170 65° 18 dBi 0°–8°T 741 784 1710 – 2170 1302 bottom 48


XPol F-Panel 1800 33° 19.5 dBi 2°T 739 927 1710 – 1880 982 bottom 36

XPol F-Panel 1800 33° 22 dBi 2°T 741 623 1710 – 1880 1942 bottom 36

XPol F-Panel 1710–2170 65° 12 dBi 2°T 739 489 1710 – 2170 342 bottom 37

XPol F-Panel 1800 65° 15.5 dBi 739 490 1710 – 1880 662 bottom or top 38XPol F-Panel 1800 65° 15.5 dBi 6°T 739 491 1710 – 1880 662 bottom 38XPol F-Panel 1800 65° 15 dBi 12°T 741 264 1710 – 1880 662 bottom 39

XPol F-Panel 1800 65° 18 dBi 739 494 1710 – 1880 1302 bottom or top 39XPol F-Panel 1710–1990 65° 18 dBi 2°T 739 495 1710 – 1990 1302 bottom 40XPol F-Panel 1710–1990 65° 18 dBi 6°T 739 496 1710 – 1990 1302 bottom 40

XPol F-Panel 1710–2170 65° 18.5 dBi 2°T 741 794 1710 – 2170 1302 bottom 41

XPol F-Panel 1710–1990 65° 19.5 dBi 2°T 739 498 1710 – 1990 1942 bottom 42

XPol F-Panel 1710–1990 90° 8 dBi 739 695 1710 – 1990 174 bottom or top 43

XPol F-Panel 1800 90° 14 dBi 739 698 1710 – 1880 702 bottom or top 44XPol F-Panel 1800 90° 14 dBi 4°T 741 214 1710 – 1880 702 bottom 44

XPol F-Panel 1800 90° 16.5 dBi 2°T 739 707 1710 – 1880 1302 bottom 45XPol F-Panel 1800 90° 16.5 dBi 6°T 739 708 1710 – 1880 1302 bottom 45

XPol F-Panel 1710–2170 85° 17 dBi 2°T 741 987 1710–2170 1302 bottom 46

XPol F-Panel 1800 90° 17.5 dBi 2°T 739 710 1710 – 1880 1902 bottom 47


Summary – Directional AntennasDual Polarization +45°/–45°1800/1900/2000

Dual Polarization +45°/–45° – 1800/1900/2000

Dual Polarization +45°/–45° – 1800/1900/2000Adjustable Electrical Downtilt

Versions with connector position “Top” on request New Products

New Products


F-PanelDual PolarizationHalf-power Beam WidthFixed Electrical Downtilt

1800

X

33°

2°

739 927Type No.



Gain 2 x 19.5 dBi

Half-power beam width +45° –45°Copolar Horizontal: 33° Horizontal: 33°

Vertical: 9° Vertical: 9°


Sidelobe suppression above horizon for first sidelobebetter or equal 14 dB below maximum gain


Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5





Weight 7 kg




XPol F-Panel 1800 33° 19.5dBi 2°T

Horizontal Pattern

33°

dB

10

3

0

Vertical Pattern

– 2° electr. downtilt– first null-fill below horizon

better or equal –25 dBbelow maximum gain

3 dB

10

0

9°

1800–45°

1800+45°

7-16 7-16

741 623Type No.



Gain 2 x 22 dBi

Half-power beam width +45° –45°Copolar Horizontal: 33° Horizontal: 33°

Vertical: 5° Vertical: 5°




Isolation > 30 dB

Impedance 50 Ω

VSWR < 1.5





Weight 11 kg




XPol F-Panel 1800 33° 22dBi 2°T

Horizontal Pattern

33°

dB

10

3

0

Vertical Pattern2° electrical downtilt

dB

10

3

0

5°




Weight 2 kg






1710–2170–45°

1710–2170+45°

7-16 7-16

Multi-band F-PanelDual PolarizationHalf-power Beam WidthFixed Electrical Downtilt

1710–2170

X

65°

2°

739 489Type No.

Frequency range1710 – 1880 MHz 1850 – 1990 MHz 1920 – 2170 MHz

Polarization +45°, –45° +45°, –45° +45°, –45°

Gain 2 x 11.5 dBi 2 x 12 dBi 2 x 12 dBi

Half-power beam width Horizontal: 67° Horizontal: 65° Horizontal: 63°Copolar +45°/ –45° Vertical: 32° Vertical: 30° Vertical: 28°

Electrical tilt 5°, fixed 4°, fixed 2°, fixed

Gain-reduction in horizon typ. 0.3 dB typ. 0.2 dB typ. 0.1 dB

Front-to-back ratio, copolar > 30 dB > 30 dB > 30 dB

Cross polar ratioMaindirection 0° Typically: 20 dB Typically: 20 dB Typically: 20 dBSector ±60° > 10 dB > 10 dB > 10 dB

Isolation, between ports > 30 dB

Impedance 50 Ω

VSWR < 1.4



XPol F-Panel 1710–2170 65° 12dBi 2°T

1710–2170

Horizontal Pattern Vertical Pattern5° electr. downtilt

10

3

0

67°125°

dB

10

3

0

32°

dB


65°120°

dB

10

3

0


10

3

0

30°

dB



115°

dB

10

3

0

63°


10

3

0

28°

dB


F-PanelDual PolarizationHalf-power Beam Width

1800

X

65°

739 490Type No.



Gain 2 x 15.5 dBi




Impedance 50 Ω

VSWR < 1.5





Weight 3.5 kg




XPol F-Panel 1800 65° 15.5dBi

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern

dB

13°

10

3

0

1800–45°

1800+45°

7-16 7-16

739 491Type No.



Gain 2 x 15.5 dBi





Impedance 50 Ω

VSWR < 1.5





Weight 3.5 kg





Horizontal Pattern

65°120°

dB

10

3

0


10

3

0

14°

dB



1800

X

65°

1800–45°

1800+45°

7-16 7-16

741 264Type No.



Gain 2 x 15 dBi





Impedance 50 Ω

VSWR < 1.4





Weight 3.5 kg





Horizontal Pattern

65°120°

dB

10

3

0


10

3

0

14°

dB

739 494Type No.



Gain 2 x 18 dBi




Impedance 50 Ω

VSWR < 1.5




Connector position* Bottom or top

Weight 6 kg




XPol F-Panel 1800 65° 18dBi

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern

6.5°

dB

10

3

0


739 495Type No.



Gain 2 x 18 dBi






Impedance 50 Ω

VSWR < 1.4 (1710 – 1880 MHz)< 1.5 (1880 – 1990 MHz)





Weight 6 kg




XPol F-Panel 1710–1990 65° 18dBi 2°T


1710–1990

X

65°

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern

– 2° electrical downtilt– first null-fill below horizon


dB

10

3

0

7°

1710–1990–45°

1710–1990+45°

7-16 7-16

739 496Type No.



Gain 2 x 18 dBi






Impedance 50 Ω

VSWR < 1.4 (1710 – 1880 MHz)< 1.5 (1880 – 1990 MHz)





Weight 6 kg




XPol F-Panel 1710–1990 65° 18dBi 6°T

Horizontal Pattern

65°120°

dB

10

3

0

Vertical Pattern



7°

dB

10

3

0




Weight 6.6 kg







1710–2170

X

65°

2°

741 794Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°

Gain 2 x 17.5 dBi 2 x 18 dBi 2 x 18.5 dBi

Half-power beam width Horizontal: 67° Horizontal: 65° Horizontal: 63°Copolar +45°/ –45° Vertical: 7° Vertical: 6.7° Vertical: 6.5°


Sidelobe suppression for > 14 dB > 14 dB > 14 dBfirst sidelobe above horizon




Impedance 50 Ω

VSWR < 1.4



XPol F-Panel 1710–2170 65° 18.5dBi 2°T

1710–2170


10

3

0

67°125°

dB

7°

dB

10

3

0


65°120°

dB

10

3

0


6.7°

dB

10

3

0



115°

dB

10

3

0

63°


6.5°

dB

10

3

0

1710–2170–45°

1710–2170+45°

7-16 7-16



1710–1990

X

65°

2°

739 498Type No.



Gain 2 x 19.5 dBi (1880 – 1990 MHz)2 x 19 dBi (1710 – 1880 MHz)






Impedance 50 Ω

VSWR < 1.5





Weight 8.5 kg




XPol F-Panel 1710–1990 65° 19.5dBi 2°T

Horizontal Pattern

65°120°

dB

10

3

0


dB

10

3

0

5°

1710–1990–45°

1710–1990+45°

7-16 7-16


1710–1990–45°

1710–1990+45°

7-16 7-16


X

90°

1710–1990

739 695Type No.



Gain 2 x 8 dBi




Impedance 50 Ω

VSWR < 1.4





Weight 3 kg




XPol F-Panel 1710–1990 90° 8dBi

Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern

dB

55°

10

3

0



1800

X

90°

739 698Type No.



Gain 2 x 14 dBi




Impedance 50 Ω

VSWR < 1.4





Weight 3.5 kg




XPol F-Panel 1800 90° 14dBi

Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern

dB

14°

10

3

0

1800–45°

1800+45°

7-16 7-16

741 214Type No.



Gain 2 x 14 dBi





Impedance 50 Ω

VSWR < 1.4





Weight 3.5 kg





Horizontal Pattern

3

0

dB

90°170°


dB

14°

10

3

0



1800

X

90°

1800–45°

1800+45°

7-16 7-16

739 707Type No.



Gain 2 x 16.5 dBi






Impedance 50 Ω

VSWR < 1.4





Weight 6 kg





Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern



dB

10

3

0

7°

739 708Type No.



Gain 2 x 16.5 dBi






Impedance 50 Ω

VSWR < 1.4





Weight 6 kg





Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern



7°

dB

10

3

0




Weight 6 kg







1710–2170

X

85°

2°

741 987Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°

Gain 2 x 16.5 dBi 2 x 16.8 dBi 2 x 17 dBi







Impedance 50 Ω

VSWR < 1.4



XPol F-Panel 1710–2170 85° 17dBi 2°T

1710–2170


3 dB

10

0

90°

170°

7°

dB

10

3

0


3 dB

10

0

85°

170°


6.7°

dB

10

3

0



3 dB

10

0

85°

170°


6.5°

dB

10

3

0

1710–2170–45°

1710–2170+45°

7-16 7-16



1800

X

90°

2°

739 710Type No.



Gain 2 x 17.5 dBi






Impedance 50 Ω

VSWR < 1.4





Weight 9 kg





Horizontal Pattern

3

0

dB

90°170°

Vertical Pattern



dB

10

3

0

5°

1800–45°

1800+45°

7-16 7-16





Weight 7 kg






1710–2170

X

65°

0°–8°

1710–2170–45°

1710–2170+45°

7-16 7-16

Horizontal Pattern Vertical Pattern0°–8° electrical downtiltcontinously adjustable

10

3

0

67°125°

dB dB

10

3

0

7°


65°120°

dB

10

3

0


6.7°

dB

10

3

0



63°120°

dB

10

3

0


6.5°

dB

10

3

0

741 784Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°



Electrical tilt 0°–8° 0°–8° 0°–8°continously adjustable continously adjustable continously adjustable

Sidelobe suppression for 0° ... 2° ... 5° ... 8°T 0° ... 2° ... 5° ... 8°T 0° ... 2° ... 5° ... 8°Tfirst sidelobe above horizon 16 ... 16 ... 14 .... 14 dB 18 ... 18 ... 16 ... 14 dB 18 ... 18 ... 16 ... 14 dB



Isolation, between ports > 30 dB > 30 dB > 30 dB

Impedance 50 Ω 50 Ω 50 Ω

VSWR < 1.5 < 1.5 < 1.5



XPol F-Panel 1710–2170 65° 18dBi 0°–8°T

1710–2170

Multi-band F-PanelDual PolarizationHalf-power Beam WidthAdjust. Electrical Downtilt






Weight 6 kg






1710–2170

X

85°

2°–8°

1710–2170–45°

1710–2170+45°

7-16 7-16


3 dB

10

0

90°

170°

dB

10

3

0

7°


3 dB

10

0

85°

170°


6.7°

dB

10

3

0



3 dB

10

0

85°

170°


6.5°

dB

10

3

0

741 989Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°









VSWR < 1.5 < 1.5 < 1.4



XPol F-Panel 1710–2170 85° 17dBi 2°–8°T

1710–2170

50

51

New Products

XXPol A-Panel 824–960/1800 C 65°/60° 14.5/16.5 dBi 742 151 824 – 960 / 1710 – 1880 1296 620°–10°T/2°T

XXPol A-Panel 824–960/1800 65°/60° 14.5/17 dBi 742 152 824 – 960 / 1710 – 1880 1296 630°–10°T/2°T

XXPol A-Panel 900/1800 C 65°/60° 17/18 dBi 742 047 870 – 960 / 1710 – 1880 2580 642°–8°T/2°T

XXPol A-Panel 900/1800 C 65°/65° 12.5/13 dBi 741 316 870 – 960 / 1710 – 1880 656 52XXPol A-Panel 900/1800 65°/65° 12.5/13.5 dBi 741 325 870 – 960 / 1710 – 1880 656 53

XXPol A-Panel 900/1800 C 65°/60° 15/16.5 dBi 741 320 870 – 960 / 1710 – 1880 1296 54XXPol A-Panel 900/1800 65°/60° 15/17 dBi 741 326 870 – 960 / 1710 – 1880 1296 55

XXPol A-Panel 900/1800 C 65°/60° 17/18 dBi 741 322 870 – 960 / 1710 – 1880 1936 56XXPol A-Panel 900/1800 65°/60° 17/18.5 dBi 741 327 870 – 960 / 1710 – 1880 1936 57

XXPol A-Panel 900/1800 C 65°/60° 18/19 dBi 741 324 870 – 960 / 1710 – 1880 2580 58XXPol A-Panel 900/1800 65°/60° 18/19.5 dBi 741 328 870 – 960 / 1710 – 1880 2580 59

XXPol A-Panel 900/1800 C 65°/60° 17.5/17.5 dBi 6°T 741 336 870 – 960 / 1710 – 1880 2580 60XXPol A-Panel 900/1800 65°/60° 17.5/18 dBi 6°T 741 344 870 – 960 / 1710 – 1880 2580 61

Type Type No. Frequency range Height Page[MHz] [mm]

Summary – Directional AntennasDual-band900/1800/2000

Dual-band 900/1800 – Dual Polarization +45°/–45°

Dual-band 900/1800 – Dual Polarization +45°/–45°Adjustable Electrical Downtilt

Connector position: Bottom

Connector position: Bottom

VPol BiDir 800/2000 65° 5dBi 738 445 824 – 960 / 1710 – 2170 310 65VPol BiDir 800/2000 65° 5dBi 738 446 824 – 960 / 1710 – 2170 310 65

VPol F-Panel 800/1800 90° 10dBi 741 880 880 – 960 / 1710 – 1880 502 66

Dual-band 900/1800/2000 – Vertical Polarization

Connector position: Bottom or top New Products


741 316Type No.

Dual-band A-PanelDual PolarizationHalf-power Beam WidthIntegrated Combiner



Weight 7 kg






C

1800–45°

900–45°

900+45°

1800+45°

C

7-16 7-16

Frequency range 900 1800870 – 960 MHz 1710 – 1880 MHz

Polarization +45°, –45° +45°, –45°




Isolation, between ports > 30 dB > 30 dB


VSWR < 1.5 < 1.5

Intermodulation IM3 < –150 dBc < –150 dBc(2 x 43 dBm carrier)

Max. power per input 250 Watt 150 Watt(at 50 °C ambient temperature)

Integrated combiner The insertion loss is included in the givenantenna gain values.

XXPol A-Panel 900/1800 C 65°/65° 12.5/13dBi

900 1800

Horizontal Pattern Vertical Pattern

65°120°

dB

10

3

0

3

0

10

dB

28°


65°120°

10

3

0

dB

+45°/–45° Polarization

dB

19°

10

3

0

+45°/–45° Polarization900

1800

1800900

XX

65°65°

* Inverted mounting:Connector position top: Change drain hole screw.

C


741 325Type No.

Dual-band A-PanelDual PolarizationHalf-power Beam Width



Weight 7 kg






1800–45°

900–45°

900+45°

1800+45°

7-16 7-16 7-16 7-16


Polarization +45°, –45° +45°, –45°

Gain 2 x 12.5 dBi 2 x 13.5 dBi



Isolation, between ports > 30 dB (GSM 900 – GSM 900)1> 30 dB (GSM 1800 – GSM 1800)> 30 dB (GSM 900 – GSM 1800)


VSWR < 1.5 < 1.5



XXPol A-Panel 900/1800 65°/65° 12.5/13.5dBi

900 1800


65°120°

dB

10

3

0

3

0

10

dB

28°


65°120°

10

3

0

dB


dB

19°

10

3

0


1800

1800900

XX

65°65°



741 320Type No.




Weight 13 kg






C

1800–45°

900–45°

900+45°

1800+45°

C

7-16 7-16


Polarization +45°, –45° +45°, –45°






VSWR < 1.5 < 1.5




XXPol A-Panel 900/1800 C 65°/60° 15/16.5dBi

900 1800


65°120°

dB

10

3

0

10

3

0

14°

dB


60°115°

dB

10

3

0


8°

dB

10

3

0


1800

1800900

XX

60°65°


C





Weight 13 kg





Mechanical specificationsHorizontal Pattern Vertical Pattern

65°120°

dB

10

3

0

10

3

0

14°

dB


60°115°

dB

10

3

0


8°

dB

10

3

0


1800

1800900

XX

60°65°


741 326Type No.

1800–45°

900–45°

900+45°

1800+45°

7-16 7-16 7-16 7-16


Polarization +45°, –45° +45°, –45°

Gain 2 x 15 dBi 2 x 17 dBi





VSWR < 1.5 < 1.5



XXPol A-Panel 900/1800 65°/60° 15/17dBi

900 1800


741 322Type No.




Weight 19 kg






C

1800–45°

900–45°

900+45°

1800+45°

C

7-16 7-16


Polarization +45°, –45° +45°, –45°



Sidelobe suppression for > 15 dB > 15 dBfirst sidelobe above horizon




VSWR < 1.5 < 1.5




XXPol A-Panel 900/1800 C 65°/60° 17/18dBi

900 1800


65°120°

dB

10

3

0

3 dB

10

0

9.5°


60°115°

dB

10

3

0


5.5°

dB

10

3

0


1800

1800900

XX

60°65°


C





Weight 19 kg






65°120°

dB

10

3

0

3 dB

10

0

9.5°


60°115°

dB

10

3

0


5.5°

dB

10

3

0


1800

1800900

XX

60°65°


741 327Type No.

1800–45°

900–45°

900+45°

1800+45°

7-16 7-16 7-16 7-16


Polarization +45°, –45° +45°, –45°



Sidelobe suppression for > 15 dBfirst sidelobe above horizon




VSWR < 1.5 < 1.5



XXPol A-Panel 900/1800 65°/60° 17/18.5dBi

900 1800


741 324Type No.




Weight 25 kg






C

1800–45°

900–45°

900+45°

1800+45°

C

7-16 7-16


Polarization +45°, –45° +45°, –45°






VSWR < 1.5 < 1.5




XXPol A-Panel 900/1800 C 65°/60° 18/19dBi

900 1800


65°120°

dB

10

3

0

3 dB

10

0

7°


60°115°

dB

10

3

0


4°

dB

10

3

0


1800

1800900

XX

60°65°


C





Weight 25 kg






65°120°

dB

10

3

0

3 dB

10

0

7°


60°115°

dB

10

3

0


4°

dB

10

3

0


1800

1800900

XX

60°65°


741 328Type No.

1800–45°

900–45°

900+45°

1800+45°

7-16 7-16 7-16 7-16


Polarization +45°, –45° +45°, –45°






VSWR < 1.5 < 1.5



XXPol A-Panel 900/1800 65°/60° 18/19.5dBi

900 1800


741 336Type No.

Dual-band A-PanelDual PolarizationHalf-power Beam WidthFixed Electrical DowntiltIntegrated Combiner



Weight 25 kg






C

1800–45°

900–45°

900+45°

1800+45°

C

7-16 7-16


Polarization +45°, –45° +45°, –45°

Gain 2 x 17.5 dBi 2 x 17.5 dBi






VSWR < 1.5 < 1.5




XXPol A-Panel 900/1800 C 65°/60° 17.5/17.5dBi 6°T

900 1800


65°120°

dB

10

3

0

7°

dB

10

3

0


60°115°

dB

10

3

0


6.5°

dB

10

3

0


1800

1800900

XX

60°

6°

65°

6°

C


Dual-band A-PanelDual PolarizationHalf-power Beam WidthFixed Electrical Downtilt



Weight 25 kg







65°120°

dB

10

3

0

7°

dB

10

3

0


60°115°

dB

10

3

0


6.5°

dB

10

3

0


1800

1800900

XX

60°

6°

65°

6°

741 344Type No.

1800–45°

900–45°

900+45°

1800+45°

7-16 7-16 7-16 7-16


Polarization +45°, –45° +45°, –45°







VSWR < 1.5 < 1.5



XXPol A-Panel 900/1800 65°/60° 17.5/18dBi 6°T

900 1800


742 151Type No.

Dual-band A-PanelDual PolarizationHalf-power Beam WidthAdjust. Electr. DowntiltIntegrated Combiner




Weight 14 kg







Polarization +45°, –45° +45°, –45° +45°, –45°

Gain 2 x 14 dBi 2 x 14.5 dBi 2 x 16.5 dBi


Electrical tilt 0°–10° 0°–10° 2°

Sidelobe suppression for 0° ... 6° ... 10°T 0° ... 6° ... 10°Tfirst sidelobe above horizon 16 ... 14 ... 12 dB 18 ... 16 ... 14 dB 14 dB





VSWR < 1.5 < 1.5



XXPol A-Panel 824–960/1800 C 65°/60° 14.5/16.5dBi 0°–10°T/2°T


65°120°

dB

10

3

0

10

3

0

15°

dB

Horizontal Pattern Vertical Pattern2° electrical downtilt

60°120°

dB

10

3

0


3 dB

10

0

8°


1710–1880824–960

XX

60°65°

2°0°–10°

824–960 1710–1880

824–960

1710–1880

C

1800–45°

900–45°

900+45°

1800+45°

C

7-16 7-16


C


742 152Type No.

Dual-band A-PanelDual PolarizationHalf-power Beam WidthAdjust. Electr. Downtilt




Weight 14 kg







Polarization +45°, –45° +45°, –45° +45°, –45°

Gain 2 x 14 dBi 2 x 14.5 dBi 2 x 17 dBi


Electrical tilt 0°–10° 0°–10° 2°

Sidelobe suppression for 0° ... 6° ... 10°T 0° ... 6° ... 10°Tfirst sidelobe above horizon 16 ... 14 ... 12 dB 18 ... 16 ... 14 dB 14 dB





VSWR < 1.5 < 1.5



XXPol A-Panel 824–960/1800 65°/60° 14.5/17dBi 0°–10°T/2°T


65°120°

dB

10

3

0

10

3

0

15°

dB


60°120°

dB

10

3

0


3 dB

10

0

8°


1710–1880824–960

XX

60°65°

2°0°–10°

824–960 1710–1880

824–960

1710–1880

824–960–45°

824–960+45°

7-16 7-16

1710–1880–45°

7-16

1710–1880+45°

7-16


Dual-band A-PanelDual PolarizationHalf-power Beam WidthAdjust. Electr. DowntiltIntegrated Combiner




Weight 25 kg






2°–8° electrical downtiltcontinously adjustable

65°120°

dB

10

3

0

3 dB

10

0

7°


60°120°

dB

10

3

0


dB

10

3

0

6°


1800

1800900

XX

60°

2°

65°

2°–8°

C

742 047Type No.


Polarization +45°, –45° +45°, –45°

Gain 2 x 17 dBi (–0.5 dB) 2 x 18 dBi (–0.5 dB)


Electrical tilt 2°–8°, adjustable 2°, fixed

Sidelobe suppression for 2° ... 4° ... 6° ... 8° T 2° Tfirst sidelobe above horizon 20 ... 18 ... 17 ... 15 dB 17 dB




VSWR < 1.5 < 1.5



XXPol A-Panel 900/1800 C 65°/60° 17/18dBi 2°–8°T/2°T

900 1800


C

1800–45°

900–45°

900+45°

1800+45°

C

7-16 7-16

65

738 445 738 446Type No.

Typical Horizontal Pattern

dB

10

3

0

Input 1 x 7-16 female 1 x N female

Frequency range 824 – 960 MHz, 1710 – 2170 MHz

VSWR < 1.5

Gain 824 – 960 MHz: 5 dBi1710 – 1880 MHz: 5.5 dBi1880 – 2170 MHz: 6.5 dBi

Impedance 50 Ω

Polarization Vertical

Max. power (total) 200 Watt (at 50 °C ambient temperature)

Weight 0.8 kg





VPol BiDir 800/2000 65° 5dBi

Material: Radiator: Tin plated copper.Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey.All screws and nuts: Stainless steel.

Mounting: Wall mounting: No additional mounting kit nee-ded.For pipe mast mounting use clamps listed below(order separately).

Ice protection: The radiating system is protected by the radome.Due to its very sturdy construction, the antennaremains operational even under icy conditions.

Grounding: All metal parts of the antenna as well as theinner conductor are DC grounded.

372

mm

400

mm

8.5 mm

Multi-band Bidirectional AntennaVertical PolarizationHalf-power Beam Width

800/2000

V

65°




Weight 2.3 kg






741 880Type No.

Dual-band F-PanelVertical PolarizationHalf-power Beam Width


Polarization Vertical Vertical

Gain 10 dBi 10 dBi

Half-power beam width Horizontal: 90° Horizontal: 90°Vertical: 35° Vertical: 35°

Front-to-back ratio > 18 dB > 20 dB


VSWR < 1.7 (880 – 960 MHz) < 1.5< 1.5 (890 – 960 MHz) (1710 – 1880 MHz)



VPol F-Panel 900/1800 90° 10dBi

900 1800


90°

180°

dB

10

3

0

3 dB

10

0

35°


90°

180°

dB

10

3

0

3 dB

10

0

35°

900

1800

1800900

VV

90°90°


67

Summary – Directional AntennasUMTS (IMT 2000)

XPol F-Panel 1710–2170 65° 12.5dBi 2°T 739 489 1710 – 2170 342 bottom 68

XPol F-Panel 1710 – 2170 65° 18.5dBi 741 794 1710 – 2170 1302 bottom 69

XPol F-Panel 1710– 2170 85° 17 dBi 2°T 741 987 1710 – 2170 1302 bottom 70


XPol Multi-band 1710 – 2170 MHz

Please see further UMTS-antennas in sections “Omni” and “Indoor”

The following antenna concepts are in development:

• XPol Single-band UMTS 1900 – 2170 MHz, 30° and 45°

• XXPol Dual-band 824 – 960 / 1710 – 2170 MHz

• XXPol 2-Multi-band 1710 – 2170 MHz / 1710 – 2170 MHz

• XXXPol Triple-band 824 – 960 / 1710 – 1880 / 1920 – 2170 MHz

• LogPer 870 – 2170 MHz

For detailed information in electronic format please contact following E-Mail:

[email protected]



XPol Multi-band 1710 – 2170 MHzAdjustable Electrical Downtilt

New Products

New Products




Weight 2 kg






1710–2170–45°

1710–2170+45°

7-16 7-16


1710–2170

X

65°

2°

739 489Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°

Gain 2 x 11.5 dBi 2 x 12 dBi 2 x 12 dBi



Gain-reduction in horizon typ. 0.3 dB typ. 0.2 dB typ. 0.1 dB




Impedance 50 Ω

VSWR < 1.4



XPol F-Panel 1710–2170 65° 12dBi 2°T

1710–2170


10

3

0

67°125°

dB

10

3

0

32°

dB


65°120°

dB

10

3

0


10

3

0

30°

dB



115°

dB

10

3

0

63°


10

3

0

28°

dB




Weight 6.6 kg







1710–2170

X

65°

2°

741 794Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°

Gain 2 x 17.5 dBi 2 x 18 dBi 2 x 18.5 dBi







Impedance 50 Ω

VSWR < 1.4



XPol F-Panel 1710–2170 65° 18.5dBi 2°T

1710–2170


10

3

0

67°125°

dB

7°

dB

10

3

0


65°120°

dB

10

3

0


6.7°

dB

10

3

0



115°

dB

10

3

0

63°


6.5°

dB

10

3

0

1710–2170–45°

1710–2170+45°

7-16 7-16




Weight 6 kg







1710–2170

X

85°

2°

741 987Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°








Impedance 50 Ω

VSWR < 1.4



XPol F-Panel 1710–2170 85° 17dBi 2°T

1710–2170


3 dB

10

0

90°

170°

7°

dB

10

3

0


3 dB

10

0

85°

170°


6.7°

dB

10

3

0



3 dB

10

0

85°

170°


6.5°

dB

10

3

0

1710–2170–45°

1710–2170+45°

7-16 7-16





Weight 7 kg






1710–2170

X

65°

0°–8°

1710–2170–45°

1710–2170+45°

7-16 7-16


10

3

0

67°125°

dB dB

10

3

0

7°


65°120°

dB

10

3

0


6.7°

dB

10

3

0



63°120°

dB

10

3

0


6.5°

dB

10

3

0

741 784Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°




Sidelobe suppression for 0° ... 2° ... 5° ... 8°T 0° ... 2° ... 5° ... 8°T 0° ... 2° ... 5° ... 8°Tfirst sidelobe above horizon 16 ... 16 ... 14 .... 14 dB 18 ... 18 ... 16 ... 14 dB 18 ... 18 ... 16 ... 14 dB





VSWR < 1.5 < 1.5 < 1.5



XPol F-Panel 1710–2170 65° 18dBi 0°–8°T

1710–2170







Weight 6 kg






1710–2170

X

85°

2°–8°

1710–2170–45°

1710–2170+45°

7-16 7-16


3 dB

10

0

90°

170°

dB

10

3

0

7°


3 dB

10

0

85°

170°


6.7°

dB

10

3

0



3 dB

10

0

85°

170°


6.5°

dB

10

3

0

741 989Type No.


Polarization +45°, –45° +45°, –45° +45°, –45°









VSWR < 1.5 < 1.5 < 1.4



XPol F-Panel 1710–2170 85° 17dBi 2°–8°T

1710–2170

73

Summary – Directional AntennasVertical Polarization800/900

VPol Panel 900 20° 16.5 dBi 735 727 870 – 960 500 bottom 76

VPol ParPanel 900 36° 14.5 dBi 728 685 870 – 960 650 bottom 77

VPol ParPanel 900 36° 17.5 dBi 728 684 870 – 960 1290 bottom 78

VPol ParPanel 900 36° 20 dBi K 73 45 64 7 870 – 960 2250 bottom 79

VPol LogPer 800/900 51° 12 dBi K 73 22 67 790 – 960 300 bottom 80

VPol LogPer 450/900 68°/60°10.5/11.5 dBi 739 990 440 – 512 1160 bottom 81824 – 960

VPol Panel 900 65° 9 dBi 730 676 860 – 960 264 bottom or top 82VPol Panel 900 65° 9 dBi 730 677 860 – 960 264 bottom or top 82

VPol Panel 900 65° 12.5 dBi 730 360 870 – 960 654 bottom 82VPol Panel 800/900 65° 12.5 dBi 732 447 806 – 960 654 bottom 82

VPol Panel 900 65° 15.5 dBi 730 368 870 – 960 1294 bottom 83VPol Panel 800/900 65° 15.5 dBi 732 448 806 – 960 1294 bottom 83VPol Panel 900 65° 15.5 dBi 6°T 732 691 870 – 960 1294 bottom 83VPol Panel 900 65° 15 dBi 12°T 737 735 880 – 960 1294 bottom 84

VPol Panel 900 65° 17 dBi 730 691 870 – 960 1934 rearside 84VPol Panel 800/900 65° 17 dBi 738 407 824 – 960 1934 rearside 84VPol Panel 900 65° 17 dBi 4.5°T 735 811 870 – 960 1934 rearside 85VPol Panel 900 65° 17 dBi 6°T 732 690 870 – 960 1934 rearside 85VPol Panel 900 65° 17 dBi 9°T 737 547 870 – 960 1934 rearside 86

VPol Panel 900 65° 18 dBi 739 854 870 – 960 2254 rearside 86

VPol Panel 900 65° 18.5 dBi 730 376 870 – 960 2574 rearside 87VPol Panel 800/900 65° 18.5 dBi 732 433 806 – 960 2574 rearside 87VPol Panel 900 65° 18.5 dBi 6°T 732 689 870 – 960 2574 bottom 88VPol Panel 900 65° 18.5 dBi 9°T 737 548 870 – 960 2574 bottom 88


Vertical Polarization – 800/900

74

VPol F-Panel 900 90° 7.5 dBi 736 622 872 – 960 262 bottom or top 89VPol F-Panel 900 90° 7.5 dBi 736 854 872 – 960 262 bottom or top 89

VPol F-Panel 900 90° 10 dBi 736 855 872 – 960 502 bottom or top 89

VPol F-Panel 900 90° 12.5 dBi 736 668 872 – 960 982 bottom or top 90

VPol F-Panel 900 90° 14 dBi 736 858 872 – 960 1222 bottom or top 90VPol Panel 900 90° 14 dBi 730 370 870 – 960 1294 bottom 91VPol Panel 800/900 90° 14 dBi 732 480 806 – 960 1294 bottom 91

VPol Panel 900 90° 15.5 dBi 732 967 870 – 960 1934 rearside 91VPol Panel 800/900 90° 15.5 dBi 742 150 806 – 960 1934 rearside 92VPol F-Panel 900 90° 15.5 dBi 736 863 872 – 960 1942 bottom or top 93VPol F-Panel 900 90° 15.5 dBi 5°T 736 864 872 – 960 1942 bottom 93VPol Panel 900 90° 15.5 dBi 6°T 741 067 870 – 960 1934 rearside 94

VPol F-Panel 900 90° 16.5 dBi 736 866 872 – 960 2422 bottom or top 95

VPol Panel 900 90° 17 dBi 730 378 870 – 960 2574 rearside 96VPol Panel 800/900 90° 17 dBi 739 418 806 – 960 2574 rearside 96VPol Panel 900 90° 17 dBi 6°T 737 549 870 – 960 2574 rearside 97

VPol Panel 900 105° 16.5 dBi 730 380 870 – 960 2574 rearside 98

VPol Panel 900 120° 13 dBi 730 374 870 – 960 1294 bottom 99



VPol Panel 900 120° 16 dBi 730 382 870 – 960 2574 rearside 100VPol Panel 800/900 120° 16 dBi 736 618 806 – 960 2574 rearside 100



VPol F-Panel 900 160° 15 dBi 2°T 737 849 880 – 960 2422 bottom 102




Additional versions on request

75


Adjustable Electrical Downtilt

VPol Panel 900 65° 15 dBi 3°–15°T 737 906 870 – 960 1294 bottom 103VPol Panel 800/900 65° 15 dBi 3°–15°T 741 493 824 – 960 1294 bottom 103VPol Panel 900 90° 13.5 dBi 3°–15°T 736 077 870 – 960 1294 bottom 104VPol F-Panel 900 90° 13.5 dBi 4°–14°T 738 580 880 – 960 1440 bottom 105VPol Panel 900 105° 13 dBi 3°–15°T 736 078 870 – 960 1294 bottom 106VPol Panel 900 160° 11.5 dBi 3°–15°T 738 018 870 – 960 1294 bottom 107

VPol 2-F-Panel 900 90° 14 dBi 738 020 872 – 960 2422 bottom 108VPol 2-F-Panel 900 90° 14 dBi 6°T 738 021 872 – 960 2422 bottom 108

VPol 3-F-Panel 900 90° 12.5 dBi 738 144 872 – 960 3041 bottom 109

Multi-unit Panels



76

735 727Type No.

Input 7-16 femaleFrequency range 870 – 960 MHzVSWR < 1.3Gain 16.5 dBiImpedance 50 ΩPolarization VerticalFront-to-back-ratio > 24 dBHalf-power Beam Width H-plane: 20°/ E-plane: 33°Max. power 500 Watt (at 50 °C ambient temperature)Weight 10 kgWind load Frontal: 500 N (at 150 km/h)

Lateral: 110 N (at 150 km/h)Rearside: 715 N (at 150 km/h)

Max. wind velocity 230 km/hPacking size 1062 x 562 x 275 mmHeight/width/depth 492 / 992 / 190 mm

PanelVertical PolarizationHalf-power Beam Width

VPol Panel 900 20° 16.5dBi

Type No. Description Remarks

K 61 14 02 2 clamps Mast: 60 – 115 mm diameterK 61 14 03 2 clamps Mast: 115 – 210 mm diameterK 61 14 04 2 clamps Mast: 210 – 380 mm diameterK 61 14 05 2 clamps Mast: 380 – 521 mm diameter

Accessories (order separately)


3 dB

10

0

20° 33°

dB

10

3

0

K 61 14 03

Material: Radiator: Aluminum.Reflector screen: Weather-proof aluminum.Radome: Fiberglass, colour: White.All screws and nuts: Stainless steel.

Ice protection: Due to the very sturdy antenna construction andthe protection of the radiating system by theradome, the antenna remains operational evenunder icy conditions.

Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.

900

V

20°

77

Parabolic PanelVertical PolarizationHalf-power Beam Width

728 685Type No.

900

V

36°

Input 7-16 femaleFrequency range 870 – 960 MHzVSWR < 1.3Gain 14.5 dBiImpedance 50 ΩPolarization VerticalFront-to-back ratio > 25 dBHalf-power Beam Width H-plane: 36°/ E-plane: 26°Max. power 400 Watt (at 50 °C ambient temperature)Weight 14.5 kgWind load Frontal: 275 N (at 150 km/h)



VPol ParPanel 900 36° 14.5dBi


733 736 2 clamps Mast: 50 – 125 mm diameterK 61 14 03 2 clamps Mast: 115 – 210 mm diameterK 61 14 04 2 clamps Mast: 210 – 380 mm diameterK 61 14 05 2 clamps Mast: 380 – 521 mm diameter733 695 1 downtilt kit Downtilt angle: 0° – 33°

Use the downtilt kit togetherwith 2 clamps suitable forthe mast diameter.



dB

36°

10

3

0

dB

26°

10

3

0

Material: Radiator: Weather-proof aluminum.Reflector screen: Weather-proof aluminum.Radome: Fiberglass, colour: Grey.All screws and nuts: Stainless steel.


Grounding: All metal parts of the antenna are DC grounded.The inner conductor is coupled capacitively.

∅ 11

760

700

429

650

591

406

140

∅ 13

K 61 14 03

78

728 684Type No.

K 61 14 03

Input 7-16 femaleFrequency range 870 – 960 MHzVSWR < 1.3Gain 17.5 dBiImpedance 50 ΩPolarization VerticalFront-to-back ratio > 30 dBHalf-power Beam Width H-plane: 36°/ E-plane: 13°Max. power 400 Watt (at 50 °C ambient temperature)Weight 21 kgWind load Frontal: 550 N (at 150 km/h)



VPol ParPanel 900 36° 17.5dBi






dB

36°

10

3

0

dB

13°

10

3

0




∅ 11

1400

1340

429

1290

591

406

140

∅ 13


900

V

36°

79

K 73 45 64 7Type No.


900

V

36°

Input 7-16 femaleFrequency range 870 – 960 MHzVSWR < 1.3Gain 20 dBiImpedance 50 ΩPolarization VerticalFront-to-back ratio > 30 dBHalf-power Beam Width H-plane: 36°/ E-plane: 8°Max. power 500 Watt (at 50 °C ambient temperature)Weight 30 kgWind load Frontal: 950 N (at 150 km/h)



VPol ParPanel 900 36° 20dBi


dB

36°

10

3

0

dB

8°

10

3

0




∅ 11

2360

2300

429

2250

591

406

140

∅ 13

K 61 14 03





80

K 73 22 67Type No.

Logarithmic periodicVertical PolarizationHalf-power Beam Width

800/900

V

51°

Input 7-16 femaleFrequency range 790 – 960 MHzVSWR < 1.4Gain 12 dBiImpedance 50 ΩPolarization VerticalSide-lobe supression > 25 dBFront-to-back ratio > 30 dBHalf-power Beam Width H-plane: 51°/ E-plane: 45°Max. power 500 Watt (at 50 °C ambient temperature)Weight 6.3 kgWind load Frontal: 20 N (at 150 km/h)



LogPer 800/900 51° 12dBi


dB

51°

10

3

0

dB

45°

10

3

0


Mounting: The antenna can be mounted on tubular mastwith a diameter of 30 – 70 mm with suppliedclamps.


Grounding: All metal parts of the antenna as well as the inner conductor are DC grounded.

81

739 990Type No.

Logarithmic periodicVertical PolarizationHalf-power Beam Width

450

V

68°

900

V

60°

Input 7-16 femaleFrequency range 440 – 512 MHz 824 – 960 MHzVSWR < 1.4Gain 10.5 dBi 11.5 dBiImpedance 50 ΩPolarization VerticalHalf-power beam width

H-plane 68° 60°E-plane 54° 48°

Front-to-back ratio > 23 dB > 25 dBMax. power 100 Watt (at 50 °C ambient temperature)Weight 9 kgWind load Frontal: 55 N (at 150 km/h)

Lateral: 440 N (at 150 km/h)Max. wind velocity 180 km/hPacking size 1172 x 372 x 225 mmLength/width/depth 1160 / 350 / 170 mm

LogPer 450/900 68/60° 10.5/11.5dBi

Material: Radiator: Weather-proof aluminum.Radome: Fiberglass, colour: Grey.All screws and nuts: Stainless steel.

Mounting: The antenna can be mounted on tubular mastwith a diameter of 48 – 115 mm with suppliedclamps.

Ice protection: The radiation system ist protected by the rado-me. Due its very sturdy construction, the antennaremains operational even under icy conditions.

Grounding: All metal parts of the antenna including the inner conductor are DC grounded.

Radiation Patternin E-plane

Radiation Patternin H-plane

54°

3 dB

10

0

68°

3 dB

10

0

440 – 512 MHz

Radiation Patternin E-plane

Radiation Patternin H-plane

48°

3 dB

10

0

60°

3 dB

10

0

824 – 960 MHz

730 360 732 447


Eurocell PanelVertical PolarizationHalf-power Beam Width

800/900

V

65°

730 676 730 677Type No.



Gain 9 dBi

Half-power beam width H-plane: 65°E-plane: 70°

Front-to-back ratio > 25 dB (890 – 960 MHz)> 20 dB (860 – 890 MHz)

Impedance 50 Ω

VSWR < 1.3


Max. power 350 Watt (at 50 °C ambient temperature)

Input 7-16 female N female


Weight 1.2 kg




VPol Panel 900 65° 9dBi

65°120°

dB

10

3

0

70°

dB

10

3

0

Horizontal Pattern

Vertical Pattern

Type No.

Frequency range 870 – 960 MHz 806 – 960 MHz


Gain 12.5 dBi 12.5 dBi (870 – 960 MHz)12 dBi (806 – 870 MHz)


Front-to-back ratio > 25 dB

Impedance 50 Ω

VSWR < 1.3 < 1.5



Input 7-16 female


Weight 3 kg




VPol Panel 800/900 65° 12.5dBi

65°120°

dB

10

3

0

3

0

10

dB

27°

Horizontal Pattern

Vertical Pattern

730 368 732 448



800/900

V

65°

Type No.



Gain 15.5 dBI 15.5 dBi (870 – 960 MHz)15 dBi (806 – 870 MHz)



Impedance 50 Ω

VSWR < 1.3 < 1.5



Input 7-16 female


Weight 6 kg





65°120°

dB

10

3

0

10

3

0

13°

dB

Horizontal Pattern

Vertical Pattern

732 691Type No.



Gain 15.5 dBi


Electrical downtilt 6°, fixed


Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 6 kg




VPol Panel 900 65° 15.5dBi 6°T

65°120°

dB

10

3

0

10

3

0

13°

dB

Horizontal Pattern




900

V

65°

737 735Type No.



Gain 15 dBi



Sidelobe suppression > 20 dB (0°... 40° above horizon)


Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 6 kg




VPol Panel 900 65° 15dBi 12°T

65°120°

dB

10

3

0

dB

17°

10

3

0

Horizontal Pattern


730 691 738 407Type No.



Gain 17 dBi

Half-power beam width H-plane: 65°E-plane: 8.5°


Impedance 50 Ω

VSWR < 1.3 < 1.5



Input 7-16 female

Connector position Rearside

Weight 9 kg




VPol Panel 800/900 65° 17dBi

65°120°

dB

10

3

0

8.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



900

V

65°

735 811Type No.



Gain 17 dBi


Electrical downtilt 4.5°, fixed


Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 9 kg




VPol Panel 900 65° 17dBi 4.5°T

65°120°

dB

10

3

0

8.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern4.5° electr. downtilt

732 690Type No.



Gain 17 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 9 kg





65°120°

dB

10

3

0

8.5°

dB

10

3

0

Horizontal Pattern




900

V

65°

737 547Type No.



Gain 17 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 9 kg





65°120°

dB

10

3

0

10

3

0

9°

dB

Horizontal Pattern


739 854Type No.



Gain 18 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 10.5 kg





65°120°

dB

10

3

0

7.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



900

V

65°

730 376Type No.



Gain 18.5 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 12 kg





65°120°

dB

10

3

0

6.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern

732 433Type No.



Gain 18.5 dBi (870 – 960 MHz)18 dBi (806 – 870 MHz)



Impedance 50 Ω

VSWR < 1.5



Input 7-16 female


Weight 12 kg





65°120°

dB

10

3

0

6.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



900

V

65°

732 689Type No.



Gain 18.5 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 12 kg





65°120°

dB

10

3

0

6.5°

dB

10

3

0

Horizontal Pattern


737 548Type No.



Gain 18.5 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 12 kg





65°120°

dB

10

3

0

6,5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern9°electr. downtilt


F-PanelVertical PolarizationHalf-power Beam Width

900

V

90°

736 622 736 854Type No.



Gain 7.5 dBi



Impedance 50 Ω

VSWR < 1.5





Weight 1.5 kg




VPol F-Panel 900 90° 7.5dBi

90°

180°

dB

10

3

0

70°

dB

10

3

0

Horizontal Pattern

Vertical Pattern

736 855Type No.



Gain 10 dBi



Impedance 50 Ω

VSWR < 1.4



Input 7-16 female


Weight 2.3 kg




VPol F-Panel 900 90° 10dBi

90°

180°

dB

10

3

0

3 dB

10

0

36°

Horizontal Pattern

Vertical Pattern



900

V

90°

736 668Type No.



Gain 12.5 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 3.8 kg





90°

180°

dB

10

3

0

10

3

0

18°

dB

Horizontal Pattern

Vertical Pattern

736 858Type No.



Gain 14 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 4.6 kg





90°

180°

dB

10

3

0

10

3

0

14°

dB

Horizontal Pattern

Vertical Pattern



800/900

V

90°

730 370 732 480Type No.



Gain 14 dBi 14 dBi (870 – 960 MHz)13.5 dBi (806 – 870 MHz)



Impedance 50 Ω

VSWR < 1.3 < 1.4



Input 7-16 female


Weight 6 kg





90°

180°

dB

10

3

0

10

3

0

13°

dB

Horizontal Pattern

Vertical Pattern

732 967Type No.



Gain 15.5 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 9 kg





90°

180°

dB

10

3

0

8.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



800/900

V

90°

742 150Type No.






Impedance 50 Ω

VSWR < 1.4



Input 7-16 female


Weight 9 kg





90°

180°

dB

10

3

0

8.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



900

V

90°

736 863Type No.



Gain 15.5 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 6.8 kg





90°

180°

dB

10

3

0

8.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern

first null-fill below horizonbetter or equal to –25 dB

below maximum gain

736 864Type No.



Gain 15.5 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 6.8 kg




VPol F-Panel 900 90° 15.5dBi 5°T

3

0

dB

90°180°

5°

dB

10

3

0

Horizontal Pattern



Eurocell PanelVertical PolarizationHalf-power Beam WidthFixed Electrical Downtilt

900

V

90°

6°

741 067Type No.



Gain 15.5 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 9 kg





3

0

dB

90°180°

9°

dB

10

3

0

Horizontal Pattern




900

V

90°

736 866Type No.



Gain 16.5 dBi



Impedance 50 Ω

VSWR < 1.4



Input 7-16 female


Weight 9 kg





90°

180°

dB

10

3

0

7°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



800/900

V

90°

730 378 739 418Type No.



Gain 17 dBi



Impedance 50 Ω

VSWR < 1.3 < 1.5



Input 7-16 female


Weight 12 kg





90°

180°

dB

10

3

0

6.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern


Eurocell PanelVertical PolarizationHalf-power Beam WidthFixed Electrical Downtilt

900

V

90°

6°

737 549Type No.



Gain 17 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 12 kg





90°

180°

dB

10

3

0

6.5°

dB

10

3

0

Horizontal Pattern




900

V

105°

730 380Type No.



Gain 16.5 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 12 kg





105°

195°

3

0

dB

6.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



900

V

120°

730 374Type No.



Gain 13 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 6 kg





3 dB

10

0

120°

215°

10

3

0

13°

dB

Horizontal Pattern

Vertical Pattern

737 385Type No.



Gain 14.5 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 9 kg





3 dB

10

0

120°

215°

8.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



900

V

120°

739 856Type No.



Gain 15.5 dBi



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 10.5 kg





3 dB

10

0

120°

215°

7.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern

730 382 736 618Type No.



Gain 16 dBi 16 dBi (870 – 960 MHz)15.5 dBi (806 – 870 MHz)



Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 12 kg





3 dB

10

0

120°

215°

6.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



900

V

160°

736 900Type No.



Gain 11 dBi



Impedance 50 Ω

VSWR < 1.4



Input 7-16 female


Weight 5 kg



Height/width/depth 982 / 155 / 49 mm(224 mm incl. Subreflector)


dB

10

3

0

230°

160°

10

3

0

18°

dB

Horizontal Pattern

Vertical Pattern

736 902Type No.



Gain 14 dBi



Impedance 50 Ω

VSWR < 1.4



Input 7-16 female


Weight 7 kg





dB

10

3

0

230°

160°

8.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern


F-PanelVertical PolarizationHalf-power Beam WidthFixed Electrical Downtilt

900

V

160°

2°

737 849Type No.



Gain 15 dBi




Impedance 50 Ω

VSWR < 1.3



Input 7-16 female


Weight 10 kg




VPol F-Panel 900 160° 15dBi 2°T

dB

10

3

0

230°

160°

7°

dB

10

3

0

Horizontal Pattern


Eurocell PanelVertical PolarizationHalf-power Beam WidthAdjust. Electr. Downtilt


737 906 741 493Type No.

Input 7-16 female


Weight 7 kg








Gain 15 dBi


Electrical downtilt 3°–15°, adjustable in 1° steps

Side lobe suppression > 14 dB (0°... 40° above horizon)


Impedance 50 Ω

VSWR < 1.4



VPol Panel 900 65° 15dBi 3°–15°T

900

V

65°

3°–15°

Horizontal Pattern

Vertical Pattern7° Downtilt

65°120°

dB

10

3

0

10

3

0

14°

dB

10

3

0

15°

dB


To set electrical downtilt:– push the lever towards

the antenna. – align to the desired

setting.– let the lever click into

position.

Horizontal Pattern


65°120°

dB

10

3

0

10

3

0

15°

dB

10

3

0

15°

dB


737 906 741 493


736 077Type No.

Input 7-16 female


Weight 6 kg








Gain 13.5 dBi





Impedance 50 Ω

VSWR < 1.4



VPol Panel 900 90° 13.5dBi 3°–15°T


900

V

90°

3°–15°

Horizontal Pattern


90°

180°

dB

10

3

0

10

3

0

14°

dB

10

3

0

15°

dB





position.


Input 7-16 female



Weight 4.6 kg






738 580Type No.

F-PanelVertical PolarizationHalf-power Beam WidthAdjust. Elect r. Downtilt



Gain 13 dBi


Electrical tilt 4°–14°, continously adjustable


Impedance 50 Ω

VSWR < 1.5



VPol F-Panel 900 90 ° 13dBi 4°–14°T

900

V

90°

4°–14°

3

0

dB

90°180°

10

3

0

14°

dB

Horizontal Pattern


10

3

0

15°

dB



736 078Type No.

Input 7-16 female


Weight 6 kg








Gain 13 dBi





Impedance 50 Ω

VSWR < 1.4



VPol Panel 900 105° 13dBi 3°–15°T


900

V

105°

3°–15°




position.

Horizontal Pattern


105°

195°

3

0

dB

10

3

0

14°

dB

10

3

0

15°

dB



738 018Type No.

Input 7-16 female


Weight 6.5 kg




Height/width/depth 1294 / 258 / 103 mm(284 mm incl. subreflector)




Gain 11.5 dBi





Impedance 50 Ω

VSWR < 1.5



VPol Panel 900 160° 11.5dBi 3°–15°T


900

V

160°

3°–15°

Horizontal Pattern


dB

10

3

0

230°

160°

10

3

0

14°

dB

10

3

0

15°

dB





position.


Multi-unit F-PanelHalf-power Beam Width2 Unit Antennas

900

90°

2 x 7-16 femaleBottom or top

Bottom: Connector T = Top systemConnector B = Bottom system

Top: Connector T = Bottom systemConnector B = Top system

872 – 960 MHz< 1.4

14 dBi bottom system13.5 dBi top system

50 ΩVertical> 20 dB

H-plane: 90°/ E-plane: 14°> 36 dB

400 Watt (at 50 °C ambient temperature)9 kg

Frontal: 490 N (at 150 km/h)Lateral: 230 N (at 150 km/h)Rearside: 620 N (at 150 km/h)

180 km/h2422 / 155 / 49 mm

2 x 7-16 femaleBottom

872 – 960 MHz< 1.4

14 dBi bottom system13.5 dBi top system


H-plane: 90°/ E-plane: 14°, 6°T> 36 dB



180 km/h2422 / 155 / 49 mm

2800 mm (incl. mast)220 mm

70 kg600 N (at 150 km/h)

180 km/hBottom (6 x 7-16 female)

By means of 190 mm diameter standard flange.Mast and flange: Hot dip galvanized steel.

Antennas: Completely closed fiberglass radome.Colour: Grey.

All screws and nuts: Stainless steel.vertical > 36 dB

horizontal > 45 dBAll metal parts of the antenna as well asthe inner conductors are DC grounded.

Type No. 738 020 738 021Input Connector position

Frequency rangeVSWRGain

ImpedancePolarizationFront-to-back ratioHalf-power beam widthIsolationMax. power per inputWeightWind load

Max. wind velocityHeight/width/depth

Length DiameterWeightWind loadMax. wind velocityConnector positionMountingMaterial

Isolation

Grounding

Antenna VPol 2-F-Panel 900 90° 14dBi VPol 2-F-Panel 900 90° 14dBi 6°T

Top view

88.9 mm

3

0

dB

90°180°

10

3

0

14°

dB

10

3

0

14°dB

Components for a 6-unit GSM antenna for 3 sectorsUsing the mast type no. 738 019 and the azimuth adjustment flange type no. 737 649, the 2-unit antennas type no. 738 020 or 738 021 can be combined to form a 6-unit antenna.Data of the 6-unit antenna:

Description Type no. Quantity

Example 1: 2-F-panel 900 90° 14 dBi 738 020 3 piecesMast 738 019 1 pieceAzimuth adjustment flange 737 649 1 piece

Example 2: 2-F-panel 900 90° 14 dBi 738 020 1 piece2-F-panel 900 90° 14dBi 6°T 738 021 2 piecesMast 738 019 1 pieceAzimuth adjustment flange 737 649 1 piece

The components must be ordered separately:

220 mm

ø190

ø150

ø18

100

Flange base of the mast738 019


Multi-unit F-PanelHalf-power Beam Width3 Unit Antennas

Top view

ø190

ø150

ø18

100

Flange base of the mast738 139

3 x 7-16 femaleBottom

872 – 960 MHz< 1.4

12.5 dBi bottom system12 dBi middle, top system


H-plane: 90°/ E-plane: 18°> 36 dB



180 km/h (on mast type no. 738139)3041 / 155 / 49 mm

Type No. 738 144InputConnector positionFrequency rangeVSWRGain

ImpedancePolarizationFront-to-back ratioHalf-power beam widthIsolationMax. power per inputWeightWind load

Max. wind velocityHeight/width/depth

Antenna VPol 3-F-Panel 900 90° 12.5dBi

3

0

dB

90°180°

10

3

0

18°

dB

3400 mm (incl. mast)220 mm

84 kg750 N (at 150 km/h)

180 km/hBottom (9 x 7-16 female)

By means of 190 mm diameter standard flange.Mast and flange: Hot dip galvanized steel.

Antennas: Completely closed fiberglass radome.Colour: Grey.

All screws and nuts: Stainless steel.Vertical > 36 dB

Horizontal > 45 dBAll metal parts of the antenna as well asthe inner conductors are DC grounded.

Length DiameterWeightWind loadMax. wind velocityConnector positionMountingMaterial

Isolation

Grounding

Components for a 9-unit GSM antenna for 3 sectorsUsing the mast type no. 738 139 and the azimuth adjustment flange type no. 737 649, the 3-unit antennas type no. 738 144 or 738 145 can be combined to form a 9-unit antenna.

Data of the 9-unit antenna:

Description Type No. Quantity

Example 1: 3-F-panel 900 90° 12.5 dBi 738 144 3 piecesMast 738 139 1 pieceAzimuth adjustment flange 737 649 1 piece

Example 2: 3-F-panel 900 90° 12.5 dBi 738 144 1 piece3-F-panel 900 90° 12.5 dBi 10°T 738 145 2 piecesMast 738 139 1 pieceAzimuth adjustment flange 737 649 1 piece

The components must be ordered separately:

88.9 mm

220 mm

900

90°

110

111


VPol F-Panel1800/1900 33° 15 dBi 739 129 1710 – 1990 342 bottom or top 112



VPol F-Panel1800/1900 33° 22.5 dBi 739 136 1710 – 1990 1942 bottom or top 113

VPol F-Panel 1800 65° 10 dBi 734 304 1710 –1900 182 bottom or top 114

VPol F-Panel 1800 65° 15.5 dBi 734 310 1710 – 1900 662 bottom or top 114VPol F-Panel 1800 65° 17 dBi 2°T 735 141 1710 – 1900 982 bottom 115VPol F-Panel 1800 65° 16.5 dBi 8°T 736 016 1710 – 1900 982 bottom 115

VPol F-Panel 1800 65° 18 dBi 734 314 1710 – 1900 1302 bottom or top 116VPol F-Panel 1800 65° 18 dBi 2°T 735 147 1710 – 1900 1302 bottom 116

VPol F-Panel 1800 90° 8 dBi 734 318 1710 – 1900 182 bottom or top 117VPol F-Panel 1800 90° 8 dBi 734 319 1710 – 1900 182 bottom or top 117


VPol F-Panel 1800 90° 16.5 dBi 2°T 734 328 1710 – 1900 1302 bottom 118

VPol F-Panel 1800 90° 17.5 dBi 2°T 734 330 1710 – 1900 1942 bottom 118

VPol F-Panel 1800 105° 16 dBi 2°T 734 342 1710 – 1900 1302 bottom 119


Vertical Polarization




1800/1900

V

33°

739 129Type No.



Gain 15 dBi (1880 – 1990 MHz)14.5 dBi (1710 – 1880 MHz)



Impedance 50 Ω

VSWR < 1.5



Input 7-16 female


Weight 2.5 kg





33°

dB

10

3

0

3

0

27°

10

dB

Horizontal Pattern

Vertical Pattern

739 131Type No.






Impedance 50 Ω

VSWR < 1.5



Input 7-16 female


Weight 4 kg





33°

dB

10

3

0

dB

13°

10

3

0

Horizontal Pattern

Vertical Pattern



1800/1900

V

33°

739 134Type No.






Impedance 50 Ω

VSWR < 1.5



Input 7-16 female


Weight 7.5 kg





33°

dB

10

3

0

6.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern

739 136Type No.






Impedance 50 Ω

VSWR < 1.5



Input 7-16 female


Weight 11 kg




VPol F-Panel 1800/1900 33° 22.5dBi

33°

dB

10

3

0

4.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern



1800

V

65°

734 304Type No.



Gain 10 dBi



Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 1.3 kg





65°120°

dB

10

3

0

dB

55°

10

3

0

Horizontal Pattern

Vertical Pattern

734 310Type No.



Gain 15.5 dBi



Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 2.7 kg





65°120°

dB

10

3

0

10

3

0

14°

dB

Horizontal Pattern

Vertical Pattern



1800

V

65°

735 141Type No.



Gain 17 dBi





Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 3.7 kg





65°120°

dB

10

3

0

3 dB

10

0

9°

Horizontal Pattern

Vertical Pattern



736 016Type No.



Gain 16.5 dBi



Side lobe suppression above horizon for first sidelobebetter or equal 14 dB below maximum gain


Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 3.7 kg





65°120°

dB

10

3

0

10

3

0

9°

dB

Horizontal Pattern

Vertical Pattern





1800

V

65°

734 314Type No.



Gain 18 dBi



Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 4.6 kg





65°120°

dB

10

3

0

6.5°

dB

10

3

0

Horizontal Pattern

Vertical Pattern

735 147Type No.



Gain 18 dBi



Side lobe suppression above horizon for first sidelobebetter or equal 14 dB below maximum gain


Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 4.6 kg





65°120°

dB

10

3

0

dB

10

3

0

7°

Horizontal Pattern

Vertical Pattern


better or equal to –25 dBbelow maximum gain



1800

V

90°

734 318 734 319Type No.



Gain 8 dBi



Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)





Weight 1.4 kg





3

0

dB

90°180°

dB

55°

10

3

0

Horizontal Pattern

Vertical Pattern

734 320Type No.



Gain 11 dBi



Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 1.9 kg





3

0

dB

90°180°

10

3

0

30°

dB

Horizontal Pattern

Vertical Pattern



1800

V

90°

734 328Type No.



Gain 16.5 dBi





Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 4.6 kg





3

0

dB

90°180°

dB

10

3

0

7°

Horizontal Pattern

Vertical Pattern



734 330Type No.



Gain 17.5 dBi





Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 6.9 kg





3

0

dB

90°180°

dB

10

3

0

5°

Horizontal Pattern

Vertical Pattern




F-PanelVertical PolarizationHalf-power Beam WidthFixed Electrical Downtilt

1800

V

105°

2°

734 342Type No.



Gain 16 dBi





Impedance 50 Ω

VSWR < 1.3 (1710 – 1880 MHz)< 1.5 (1880 – 1900 MHz)



Input 7-16 female


Weight 4.9 kg





105°

195°

3

0

dBdB

10

3

0

7°

Horizontal Pattern

Vertical Pattern



120

121

Omnidirectional Antennas

Solid, reliable Omnidirectional antennas are often installed at construction exposed sites on the top of masts, so special

attention has been paid to their mechnicalconstruction.The exceptionally stiff fiberglass tube with low tip deflection will withstand wind velocitiesof up to 200 km/h.

Excellent grounding From the solid metal tip right down to the baseof the high gain antennas the grounding cross-section is 22 mm2 copper or more, exceedingEN 50083-1.


Environmental conditions Kathrein cellular antennas are designed tooperate under the environmental conditions asdescribed in ETS 300 019-1-4 class 4.1 E.The antennas exceed this standard with regardto the following items:– Low temperature: – 55 °C– High temperature (dry): + 60 °C

Environmental tests Kathrein antennas have passed environmentaltests as recommended in ETS 300 019-2-4.The homogenous design of Kathrein’s antennafamilies use identical modules and materials.Extensive tests have been performed on typi-cal samples and modules.

Long service life According to our own experience, the out-standing mechanical characteristics of Kathreinantennas result in an antenna service life ofover 15 years.

Low intermodulation From on our many years of experience products (typically –150 dBc) in the construction of antennas and from our

extensive research into the effects of inter-modulation, we have been able to optimize thematerial used for these antennas. (The indicated values refer to 3rd orderproducts measured with 2 carriers of 20 W each).

Integrated mast attachment Integrated into the antenna base are two easily mountable U-bolt brackets,suitable for masts of diameters from 50 to 94 mm or 30 to 105 mm.

122

VPol Omni 900 360° 2 dBi 738 450 870 – 960 N 180 indoor/outdoor 123VPol Omni 800/900 360° 2 dBi K 75 11 61 806 – 960 N 273 124VPol Omni 800/900 360° 2 dBi K 75 11 67 806 – 960 7-16 273 124

VPol Omni 900 360° 5 dBi K 75 15 64 1 890 – 960 N 635 125VPol Omni 900 360° 5 dBi K 75 15 64 7 890 – 960 7-16 635 125

VPol Omni 900 360° 8 dBi 736 350 870 – 960 7-16 1543 126VPol Omni 900 360° 8 dBi 736 351 870 – 960 7-16 1536 inverted 126VPol Omni 900 360° 8 dBi 741 558 870 – 960 7-16 1764 special base 127

VPol Omni 800 360° 11 dBi 738 192 824 – 894 7-16 3237 128

VPol Omni 900 360° 11 dBi 736 347 870 – 960 7-16 3033 129VPol Omni 900 360° 11 dBi 736 348 870 – 960 7-16 3022 inverted 129VPol Omni 900 360° 11 dBi 738 779 870 – 960 7-16 3254 special base 130

VPol Omni 900 360° 11 dBi 736 352 870 – 960 7-16 3233 lightning rod 131

VPol Omni 900 360° 10.5 dBi 5°T 736 349 870 – 960 7-16 2954 132VPol Omni 900 360° 10.5 dBi 5°T 738 664 870 – 960 7-16 2856 inverted 132

Type Type No. Frequency Connector Height Remarks Page range [MHz] female [mm]


Vertical Polarization – 1800

VPol Omni 900/1800 360° 2 dBi 738 449 870 – 960 N 216 indoor/outdoor 1331710 – 1880

VPol Omni 1800 360° 8 dBi 739 785 1710 – 1880 7-16 800 134

VPol Omni 1800 360° 11 dBi 738 187 1710 – 1880 7-16 1570 135VPol Omni 1800 360° 11 dBi 739 404 1700 – 1880 7-16 1558 inverted 135VPol Omni 1800 360° 11 dBi 6°T 737 190 1710 – 1880 7-16 1560 136

Vertical Polarization – Dual-band 900/1800

VPol Omni 2000 360° 11 dBi 741 790 1920 – 2170 7-16 1390 138

Vertical Polarization – 2000

Summary – Omnidirectional Antennas800/900/1800/2000

VPol Omni 1710–2170 360° 2 dBi 738 454 1710 – 2170 N 115 indoor/outdoor 137


New Product

738 450Type No.

123

Omnidirectional AntennaVertical PolarizationIndoor and outdoor use

dB

78°

10

3

0

Vertical Pattern

Input N female



VSWR < 1.5

Gain 2 dBi

Impedance 50 Ω



Weight 200 g

Radome diameter 20 mm

Height 180 mm

VPol Omni 900 360° 2dBi

Material: Radiator: Brass.Radome: Fiberglass, colour: White.

Mounting: One hole mounting (16 mm diameter) to surfaces of max. 10 mm thickness.

Grounding: All metal parts of the antenna as well as the inner conductor and the mounting kit are DC grounded.

180

mm

900

V

124Brackets for side mounting (see page 182 – 184)

K 75 11 61 K 75 11 67Type No.

Omnidirectional AntennasVertical Polarization

Input N female 7-16 female


Weight 0.74 kg


Wind load 17 N (at 150 km/h)



Height 348 mm

Mechanicalspecifications K 75 11 61 K 75 11 67



Gain 2 dBi

Impedance 50 Ω

VSWR < 1.5


VPol Omni 806–960 360° 2dBi

806–960

V

348

mm

Vertical Pattern

dB

78°

10

3

0

Mounting: The antenna can be attached in two ways withthe supplied mounting kit:1. On the tip of a tubular mast of 40 – 54 mm

diameter (connecting cable runs inside themast).

2. Laterally at the tip of a tubular mast of 20 – 54 mm diameter (connecting cable runsoutside the mast).

Material: Radiator: Brass. Radome: Fiberglass, colour: Grey.Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.


On the tip Laterally at the tip



K 75 15 64 1 K 75 15 64 7Type No.


Input N female 7-16 female


Weight 0.90 kg





Height 715 mm

Mechanicalspecifications K 75 15 64 1 K 75 15 64 7



Gain 5 dBi

Impedance 50 Ω

VSWR < 1.5



900

V

Vertical Pattern

30°

dB

10

3

0

715

mmMounting: The antenna can be attached in two ways with

the supplied mounting kit:1. On the tip of a tubular mast of 40 – 54 mm



Material: Radiator: Brass. Radome: Fiberglass, colour: Grey.Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.



736 350 736 351Type No.


Input 7-16 female 7-16 female

Connector position Bottom Top

Weight 5.5 kg





Height 1543 mm 1536 mm

Mechanicalspecifications 736 350 736 351



Gain 8 dBi

Impedance 50 Ω

VSWR < 1.5




900

V

Vertical Pattern

3 dB

10

0

13°

1543

mm

736 350

Mounting: The antenna can be attached laterally at the tipof a tubular mast of 50 – 94 mm diameter withtwo U-bolt brackets supplied with the antenna(connecting cable runs outside the mast).

Material: Radiator: Copper and brass. Radome:Fiberglass, colour: Grey.Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.

Excellent grounding: From the solid metal tip right down to the base of the high gain antennas the grounding cross-section is 22 mm2 copper or more, exceeding EN 50083-1.

150

230

104

maximum

mast top


741 558Type No.

Omnidirectional AntennaVertical Polarization

Input 7-16 female


Weight 6 kg





Height 1764 mm




Gain 8 dBi

Impedance 50 Ω

VSWR < 1.5




900

V

Vertical Pattern

3 dB

10

0

13°

• Special base

1764

mm




Material: Radiator: Copper and brass. Radome: Fiberglass, colour: Grey.Base: Weather-proof aluminum. Mounting kit, screws and nuts: Stainless steel.

Grounding: The antenna is DC grounded via a copper tube having a cross-sectional area of 22 mm2.The inner conductor is coupled capacitively.



738 192Type No.


Input 7-16 female


Weight 8.5 kg





Height 3237 mm




Gain 11 dBi

Impedance 50 Ω

VSWR < 1.5




800

V

Vertical Pattern

3 dB

10

0

7°

3237

mm

738 192




150

230

104

maximum

mast top

150

230

104

maximum

mast top


736 347 736 348Type No.




Weight 8 kg









Gain 11 dBi

Impedance 50 Ω

VSWR < 1.5




900

V

Vertical Pattern

3 dB

10

0

7°

3033

mm

736 347





738 779Type No.


Input 7-16 female


Weight 8.5 kg





Height 3254 mm




Gain 11 dBi

Impedance 50 Ω

VSWR < 1.5




900

V

Vertical Pattern

3 dB

10

0

7°

3254

m

m

• Special base





Grounding: The antenna is DC grounded via a copper tube having a cross-sectional area of 22 mm2.The inner conductor is coupled capacitively.


131

736 352Type No.


Input 7-16 female


Weight 8.5 kg





Height 3233 mm




Gain 11 dBi

Impedance 50 Ω

VSWR < 1.5




900

V

Vertical Pattern

3 dB

10

0

7°

3233

mm

• Lightning rod




150

230

104

maximum

mast top


736 349 738 664Type No.

Omnidirectional AntennasVertical PolarizationFixed Electrical Downtilt



Weight 8 kg









Gain 10.5 dBi


Impedance 50 Ω

VSWR < 1.5



VPol Omni 900 360° 10.5dBi 5°T

900

V

5°


3 dB

10

0

7°

2954

mm

736 349




150

230

104

maximum

mast top

Dual-band Omnidirectional AntennaVertical PolarizationIndoor and outdoor use

738 449Type No.

133

dB

78°

10

3

0

Vertical Pattern

Input N female


Frequency range 870 – 960 MHz / 1710 – 1880 MHz

VSWR < 1.7

Gain 2 dBi

Impedance 50 Ω


Max. power 50 Watt: 870 – 960 MHz50 Watt: 1710 – 1880 MHz

(at 50 °C ambient temperature)

Weight 250 g


Height 216 mm

VPol Omni 900/1800 360° 2dBi



216

mm

900/1800

V


739 785Type No.


Input 7-16 female


Weight 4 kg





Height 807 mm




Gain 8 dBi

Impedance 50 Ω

VSWR < 1.5




1800

V

Vertical Pattern

3 dB

10

0

13°

807

mm

Mounting: The antenna can be attached laterally at the tipof a tubular mast of 50 – 94 mm diameter withone U-bolt bracket supplied with the antenna(connecting cable runs outside the mast).



130

104

maximum

mast top


738 187 739 404Type No.




Weight 5.5 kg









Gain 11 dBi

Impedance 50 Ω

VSWR < 1.3




1800

V

Vertical Pattern

3 dB

10

0

7°

1568

mm

738 187




150

230

104

maximum

mast top


737 190Type No.

Omnidirectional AntennaVertical PolarizationFixed Electrical Downtilt

Input 7-16 female


Weight 5.5 kg





Height 1560 mm




Gain 11 dBi


Impedance 50 Ω

VSWR < 1.3



VPol Omni 1800 360° 11dBi 6°T

1800

V

6°


3 dB

10

0

7°

1560

mm




150

230

104

maximum

mast top

137

738 454Type No.


dB

78°

10

3

0

Vertical Pattern

Input N female



VSWR < 1.5

Gain 2 dBi

Impedance 50 Ω



Weight 150 g


Height 115 mm

VPol Omni 1710–2170 360° 2dBi



Grounding: All metal parts of the antenna and the mountingkit are DC grounded. The inner conductor is notDC grounded.

115

mm

1710–2170

V


741 790Type No.


Input 7-16 female


Weight 5 kg





Height 1387 mm




Gain 11 dBi

Impedance 50 Ω

VSWR < 1.5




2000

V

Vertical Pattern

3 dB

10

0

7°

1387

mm

Mounting: The antenna can be attached laterally at the tipof a tubular mast of 50 – 94 mm diameter withone U-bolt bracket supplied with the antenna(connecting cable runs outside the mast).



130

104

maximum

mast top

139

Indoor Antennas

These antennas have a particularly unobtrusive appearance. Apart from standard single band antennas,multi-band versions are also available.

Single-band antennas

The λ/2 omnidirectional antenna for normal ceiling mounting purposes does not need an additionalgroundplane. Only a single hole is required. For thicker ceilings a mounting plate is supplied.The extremely flat directional antenna is supplied with a mounting plate for attachment to a wall.The antenna is inserted into the plate and clicks in.

Multi-band antennas

The low silhouette omnidirectional and directional antennas for AMPS, GSM, PCN, DECT, PCS and UMTS in combination with broadband power splitters enable compact and inexpensive indoor networks to beinstalled.

Indoor / Outdoor antennas

Unobtrusive omni antennas for both 900 and 1800 and also dual-band are now available especially for microcell applications. These versions are similar to our Indoor Antennas, but are suitable for outdooroperation and are fitted with an N connector.

140

Summary – Indoor Antennas


VPol Indoor 900 90° 7 dBi 736 624 870 – 960 MHz N 141




Type Type No. Frequency Connector Pagerange female

Single-band

VPol BiDir 800/2000 65° 5 dBi 738 446 824 – 960 MHz and N 1451710 – 2170 MHz

VPol Indoor 800/1900 90° 7 dBi 738 573 824 – 960 MHz and N 1461710 – 1990 MHz




Multi-band

VPol Omni 900/1800 360° 2 dBi 738 449 870 – 960 MHz and N 1501710 – 1880 MHz

VPol Omni 1710–2170 360° 2 dBi 738 454 1710 – 2170 MHz N 151

Indoor / Outdoor – Dual-band / Multi-band

VPol Omni 900 360° 2 dBi 738 450 870 – 960 MHz N 149

Indoor / Outdoor – Single-band

New Product

736 624Type No.

141

Input Cable RG 223/CU of 1m length, white,with N female connector


VSWR < 1.5

Gain 7 dBi

Impedance 50 Ω

Half-power beam width H-plane: 90°/ E-plane: 65°



Weight 500 g


Indoor Directional AntennaVertical PolarizationHalf-power Beam Width

• Flat design

Material: Radiator: Brass.Radome: ABS, colour: White.Reflector: Aluminum.Mounting plates: Stainless steel.

Mounting: Two holes of 6 mm diameter in the mountingplate are provided for this purpose.

Grounding: All metal parts as well as the inner conductor are DC grounded.

VPol Indoor 900 90° 7dBi

Mounting the attachment plate

Mount the attachment plate to the wallusing two screws of 4 mm diameter in the position as indicated.

Pulling the antenna downwards

Pull the antenna downwards until it clicks into place.

Aligning the antenna

Align the antenna over the attachmentplate, keeping the cable in the middleof the plate.

Mounting:

3 dB

10

0

90°

3 dB

10

0

65°

Horizontal Pattern

Vertical Pattern

900

V

90°

737 031Type No.

142

Indoor Omnidirectional AntennaVertical PolarizationSingle-band

Material: Radiator: Brass.Radome: Fiberglass, colour: White.Additional mounting plate: Aluminum.

Mounting: Two holes of 5.5 mm diameter in the mountingplate.

Grounding: All metal parts inclusive the inner conductor are DC grounded.

• The antenna needs no additional groundplane.

Min. Ø 22

Ceiling

90

Ø 5.5

Mounting plate



VSWR < 1.5

Gain 2 dBi

Impedance 50 Ω



Weight 200 g


Mounting plate 115 x 25 mm

Height 201 mm


900

V

736 935Type No.

143



Mounting: Two holes of 6 mm diameter in the mountingplate.

Grounding: All metal parts inclusive the inner conductorare DC grounded.

3 dB

10

0

90°

3 dB

10

0

65°

Horizontal Pattern

Vertical Pattern



VSWR < 1.5

Gain 8 dBi

Impedance 50 Ω



Half-power beam width H-plane: 90° / E-plane: 65°


Weight 200 g



Mounting:



Pull the antenna downwards untilit clicks into place.


• Flat design

1800

V

90°

736 361Type No.

144


Material: Radiator: Brass.Radome: Fiberglass, colour: White.Additional mounting plate: Aluminum.

Mounting: Two holes of 5.5 mm diameter in the mountingplate.




VSWR < 1.5

Gain 2 dBi

Impedance 50 Ω



Weight 120 g


Mounting plate 115 x 25 mm

Packing size app. 250 x 130 x 25 mm

Height 121 mm

• The antenna needs no additional groundplane.

Min. Ø 22

Ceiling

90

Ø 5.5

Mounting plate

Indoor Omnidirectional AntennaVertical PolarizationSingle-band

1800

V

145

Multi-band Bidirectional AntennaVertical PolarizationHalf-power Beam Width

800/2000

V

65°

738 446Type No.

Typical Horizontal Pattern

dB

10

3

0

Input 1 x N female

Frequency range 824 – 960 MHz, 1710 – 2170 MHz

VSWR < 1.5

Gain 824 – 960 MHz: 5 dBi1710 – 1880 MHz: 5.5 dBi1880 – 2170 MHz: 6.5 dBi

Impedance 50 Ω


Max. power (total) 200 Watt (at 50 °C ambient temperature)

Weight 0.8 kg





VPol BiDir 800/2000 65° 5dBi

Material: Radiator: Tin plated copper.Reflector: Weather-proof aluminum. Radome: High impact plastic, colour: Grey.All screws and nuts: Stainless steel.

Mounting: Wall mounting: No additional mounting kit nee-ded.For pipe mast mounting use clamps listed below(order separately).

Ice protection: The radiating system is protected by the radome.Due to its very sturdy construction, the antennaremains operational even under icy conditions.

Grounding: All metal parts of the antenna as well as theinner conductor are DC grounded.

372

mm

400

mm

8.5 mm

738 573Type No.

146



VSWR 870 – 960 MHz and 1710 – 1900 MHz: < 1.6824 – 960 MHz and 1710 – 1990 MHz: < 2.0

Gain ≈ 7 dBi

Impedance 50 Ω

Half-power beam width Horizontal: ≈ 90°



Weight 500 g



• Flat design• The antenna can be operated in all frequency ranges simultaneously.




Available accessories: Broadband power splitter (800 – 2200 MHz).

VPol Indoor 900/1800 90° 7dBi


3 dB

10

0

90°

Horizontal Pattern

Mounting:




800/1800

V

90°

742 149Type No.

147



VSWR 870 – 960 MHz and 1710 – 1900 MHz: < 1.6824 – 960 MHz and 1710 – 2170 MHz: < 2.0

Gain ≈ 7 dBi

Impedance 50 Ω

Half-power beam width Horizontal: ≈ 90°



Weight 500 g



Flat design The antenna can be operated in all frequency ranges simultaneously.




Available accessories: Broadband power splitter (800 – 2200 MHz).

VPol Indoor 800/2000 90° 7dBi


3 dB

10

0

90°

Horizontal Pattern

Mounting:




800/2000

V

90°

741 572 741 571Type No.

148

Indoor Omnidirectional AntennasVertical PolarizationMulti-band The antenna can be operated in all frequency ranges

simultaneously. The antennas need no additional groundplane.

∅ 260 mm

741 572

Material: Base: Aluminum.Protective housing: High impact polystyrol,colour: White.Additional painting is possible.

Mounting: Three holes in the base enable a mounting onthe ceiling. Two types of screws are supplied.For the N connector a hole in the ceiling with adiameter of 35 mm is required.

Grounding: All metal parts including the inner conductor are DC grounded.

Available accessories: Broadband power splitters and tappers (800 – 2200 MHz).

3 ho

les

dia.

5 m

m

dia.

160

mm

13 mm

Clip the protective housing into position afterthe antenna has been mounted with the helpof the three supplied screws.

N connector, female

min. dia. 35 mm

Frequency range 824 – 960 MHz 876 – 960 MHz1425 – 2170 MHz 1710 – 2170 MHz

VSWR < 2.0: 824 – 960 MHz < 1.8: 876 – 890 MHz< 2.0: 1425 – 1710 MHz < 1.6: 890 – 960 MHz< 1.6: 1710 – 1990 MHz < 1.6: 1710 – 1990 MHz< 2.0: 1990 – 2170 MHz < 2.0: 1990 – 2170 MHz

Input 1 x N female

Gain 2 dBi

Impedance 50 Ω


Max. power (per band) 50 Watt (at 50 °C ambient temperature)

Weight 400 g 300 g

Diameter 260 mm 210 mm

Height 78 mm (without connector)

741 572: Indoor 800/2000 360° 2dBi741 571: Indoor 900/2000 360° 2dBi

800/2000

V

149

738 450Type No.


dB

78°

10

3

0

Vertical Pattern

Input N female



VSWR < 1.5

Gain 2 dBi

Impedance 50 Ω



Weight 200 g


Height 180 mm





180

mm

900

V

150

Dual-band Omnidirectional AntennaVertical PolarizationIndoor and outdoor use

738 449Type No.dB

78°

10

3

0

Vertical Pattern

Input N female



VSWR < 1.7

Gain 2 dBi

Impedance 50 Ω


Max. power 50 Watt: 870 – 960 MHz50 Watt: 1710 – 1880 MHz

(at 50 °C ambient temperature)

Weight 250 g


Height 216 mm

VPol Omni 900/1800 360° 2dBi



216

mm

900/1800

V

151

738 454Type No.


dB

78°

10

3

0

Vertical Pattern

Input N female



VSWR < 1.5

Gain 2 dBi

Impedance 50 Ω



Weight 150 g


Height 115 mm

VPol Omni 1710–2170 360° 2dBi



Grounding: All metal parts of the antenna and the mountingkit are DC grounded. The inner conductor is notDC grounded.

115

mm

1710–2170

V

152

153

Low-loss Power Splitters and Tappers

Low-loss power splitters and tappers are used for combining antennas to obtain particular radiationpatterns or to set up indoor distribution networks.Power splitters with the following features are available:

– low-loss coaxial-line transformation

– high power rating

– equal (splitters) or unequal (tappers) power rating

– suitability for indoor and outdoor use

– extremely small dimensions

– multi-band versions for 800 – 2200 MHz.

154

2-way-Splitter 800/900 K 63 20 62 1 790 – 960 MHz Indoor/Outdoor 500 W N 1552-way-Splitter 800/900 K 63 20 62 7 790 – 960 MHz Indoor/Outdoor 1000 W 7-16 1553-way-Splitter 800/900 K 63 20 63 1 790 – 960 MHz Indoor/Outdoor 500 W N 1553-way-Splitter 800/900 K 63 20 63 7 790 – 960 MHz Indoor/Outdoor 1000 W 7-16 1554-way-Splitter 800/900 K 63 20 64 1 790 – 960 MHz Indoor/Outdoor 500 W N 1554-way-Splitter 800/900 K 63 20 64 7 790 – 960 MHz Indoor/Outdoor 1000 W 7-16 155

2-way-Splitter 1400/1900 K 63 55 8 1425 – 2000 MHz Indoor/Outdoor 700 W 7-16 1563-way-Splitter 1400/1900 K 63 56 8 1425 – 2000 MHz Indoor/Outdoor 700 W 7-16 156

2-way-Splitter 800–2200 737 303 800 – 2200 MHz Indoor/Outdoor 200 W N 1572-way-Splitter 800–2200 737 304 800 – 2200 MHz Indoor/Outdoor 700 W 7-16 1573-way-Splitter 800–2200 737 305 800 – 2200 MHz Indoor/Outdoor 200 W N 1573-way-Splitter 800–2200 737 306 800 – 2200 MHz Indoor/Outdoor 700 W 7-16 1574-way-Splitter 800–2200 737 307 800 – 2200 MHz Indoor/Outdoor 200 W N 1574-way-Splitter 800–2200 737 308 800 – 2200 MHz Indoor/Outdoor 700 W 7-16 157

2-way-Splitter 800–2200 K 63 22 62 1 800 – 2200 MHz Indoor 100 W N 1583-way-Splitter 800–2200 K 63 22 63 1 800 – 2200 MHz Indoor 100 W N 1584-way-Splitter 800–2200 K 63 22 64 1 800 – 2200 MHz Indoor 100 W N 158

Type Type No. Frequency Remark Max. Connector Page range power female

Summary – Low-loss Power Splitters

2-way-Tapper 1800/1900 4.8/1.8 dB 737 965 1710 – 2000 MHz Indoor/Outdoor 700 W 7-16 1592-way-Tapper 1800/1900 6.0/1.2 dB 737 966 1710 – 2000 MHz Indoor/Outdoor 700 W 7-16 1592-way-Tapper 1800/1900 7.0/1.0 dB 737 967 1710 – 2000 MHz Indoor/Outdoor 700 W 7-16 159

2-way-Tapper 800–2200 7.0/1.0 dB K 63 23 60 61 800 – 2200 MHz Indoor 100 W N 1602-way-Tapper 800–2200 10.4/0.4 dB K 63 23 61 01 800 – 2200 MHz Indoor 100 W N 1602-way-Tapper 800–2200 15.1/0.1 dB K 63 23 61 51 800 – 2200 MHz Indoor 100 W N 160

2-way-Tapper 800–2200 7.0/1.0 dB K 63 23 60 67 800 – 2200 MHz Indoor/Outdoor 500 W 7-16 1612-way-Tapper 800–2200 10.4/0.4 dB K 63 23 61 07 800 – 2200 MHz Indoor/Outdoor 500 W 7-16 1612-way-Tapper 800–2200 15.1/0.1 dB K 63 23 61 57 800 – 2200 MHz Indoor/Outdoor 500 W 7-16 161

Type Type No. Frequency Remark Max. Connector Page range power female

Summary – Low-loss Power Tappers

New Products

155

Type No. K 63 20 62 1 K 63 20 62 7 K 63 20 63 1 K 63 20 63 7 K 63 20 64 1 K 63 20 64 7

Connector (female) N 7-16 N 7-16 N 7-16Max. power 500 W 1000 W 500 W 1000 W 500 W 1000 Wat 50 °C ambient temperatureFor connecting ... antennas 2 3 4Frequency range 790 – 960 MHzVSWR < 1.1Impedance 50 ΩInsertion loss < 0.05 dBWeight appr. 1.3 kgPacking size 240 x 93 x 107 mmMax. size 210 / 80 / 80 mm

Material: Housing: Aluminum.Inner conductor: Brass.

Mounting: Bracket for wall mounting included in the scopeof supply: For pipe mast mounting use clampslisted below (order separately).

DC capability: DC transmission between all terminations (suitable for remote power supply systems).

Clamps (order separately)

736 801 1 clamp Mast: 34 – 60 mm diameter736 802 1 clamp Mast: 60 – 80 mm diameter736 803 1 clamp Mast: 80 – 100 mm diameter736 804 1 clamp Mast: 100 – 120 mm diameter736 805 1 clamp Mast: 120 – 140 mm diameter


Input

K 63 20 64 7

736 805

Low-loss Power Splitters790 – 960 MHzIndoor and outdoor use

2-way-Splitter 800/9003-way-Splitter 800/9004-way-Splitter 800/900

156

Connector (female) 7-16 7-16Max. power 700 W 700 W(at 50 °C ambient temperature)For connecting ... antennas 2 3Frequency range 1425 – 2000 MHzVSWR < 1.1Impedance 50 ΩInsertion loss < 0.05 dBWeight appr. 1.0 kgPacking size 185 x 93 x 107 mmMax. size 160 / 82 / 82 mm

Type No. K 63 55 8 K 63 56 8

Low-loss Power Splitters1425 – 2000 MHzIndoor and outdoor use


Mounting: Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listedbelow (order separately).


2-way-Splitter 1400/19003-way-Splitter 1400/19004-way-Splitter 1400/1900




736 805

Input

K 63 57 8

157

Low-loss Power Splitters – Multi-band800 – 2200 MHzIndoor and outdoor use

Connector (female) N 7-16 N 7-16 N 7-16Max. power 200 W 700 W 200 W 700 W 200 W 700 W(at 50 °C ambient temperature)For connecting ... antennas 2 3 4Frequency range 800 – 2200 MHzVSWR < 1.15Impedance 50 ΩInsertion loss < 0.05 dBWeight appr. 1.5 kgPacking size 310 x 93 x 107 mmMax. size 294 / 82 / 82 mm

Type No. 737 303 737 304 737 305 737 306 737 307 737 308


Mounting: Bracket for wall mounting included in thescope of supply. For pipe mast mounting use clamps listedbelow (order separately).


2-way-Splitter 800–22003-way-Splitter 800–22004-way-Splitter 800–2200




Input

737 308

736 805

158

Type No. K 63 22 62 1 K 63 22 63 1 K 63 22 64 1

Connector N femaleMax. power 100 W (at 50 °C ambient temperature)For connecting ... antennas 2 3 4Frequency range 800 – 2200 MHzVSWR < 1.25 < 1.25 < 1.3Impedance 50 ΩInsertion loss < 0.05 dBWeight appr. 0.6 kgProfile cross-section 25 x 25 mmPacking size 242 x 110 x 95 mmMax. size 204 / 63 / 41 mm



Low-loss Power Splitters – Multi-band800 – 2200 MHzIndoor use

2-way Splitter 800–22003-way Splitter 800–22004-way Splitter 800–2200

Input

K 63 22 64 1

159

736 801 1 clamp 34 – 60 mm diameter736 802 1 clamp 60 – 80 mm diameter736 803 1 clamp 80 – 100 mm diameter736 804 1 clamp 100 – 120 mm diameter736 805 1 clamp 120 – 140 mm diameter



Tap LossInput ↔ P1 – 1.8 dB – 1.2 dB – 1.0 dBInput ↔ P2 – 4.8 dB – 6.0 dB – 7.0 dBConnectors 7-16 femaleMax. power 700 Watt (at 50 °C ambient temperature)For connecting ... antennas 2Phasedifference P1/P2 g l = 35 mmFrequency range 1710 – 2000 MHzVSWR < 1.1Impedance 50 ΩInsertion loss < 0.05 dBWeight appr. 1.2 kgPacking size 240 x 93 x 107 mmMax. size 215 / 74 / 55 mm

Type No. 737 965 737 966 737 967

Low-loss Power Tappers1710 – 2000 MHzIndoor and outdoor use


Mounting: Bracket for wall mounting included in the scope of supply. For pipe mast mounting use clamps listed below (order separately).


736 805

P2

P1

Input

737 965

2-way-Tapper 1800/1900 4.8/1.8 dB2-way-Tapper 1800/1900 6.0/1.2 dB2-way-Tapper 1800/1900 7.0/1.0 dB

160

Type No. K 63 23 60 61 K 63 23 61 01 K 63 23 61 51

Tap LossInput ↔ P1 – 1.0 dB – 0.4 dB – 0.1 dBInput ↔ P2 – 7.0 dB – 10.4 dB – 15.1 dBConnector N femaleMax. power 100 W (at 50 °C ambient temperature)For connecting ... antennas 2Frequency range 800 – 2200 MHzVSWR < 1.5Impedance 50 ΩInsertion loss < 0.05 dBWeight appr. 0.5 kgProfile cross-section 25 x 25 mmPacking size 267 x 95 x 111 mmMax. size 244 / 64 / 25 mm


DC capability: DC transmission only between input and port P1.P2 is coupled capacitively.

Input

K 63 23 60 61

Low-loss Power Tappers – Multi-band800 – 2200 MHzIndoor use

2-way-Tapper 800–2200 7.0 /1.0dB2-way-Tapper 800–2200 10.4/0.4dB2-way-Tapper 800–2200 15.1/0.1dB

P2

P1

80

0 –

22

00

161

Type No. K 63 23 60 67 K 63 23 61 07 K 63 23 61 57

Tap LossInput ↔ P1 – 1.0 dB – 0.4 dB – 0.1 dBInput ↔ P2 – 7.0 dB – 10.4 dB – 15.1 dBConnector 7-16 femaleMax. power 500 W (at 50 °C ambient temperature)For connecting ... antennas 2Frequency range 800 – 2200 MHzVSWR < 1.5Impedance 50 ΩInsertion loss < 0.05 dBWeight appr. 1.3 kgMax. size 244 / 90 / 55 mm


DC capability: DC transmission only between input and port P1.P2 is coupled capacitively.

Mounting: Bracked for wall mounting included in the scopeof supply.For pipe mast mounting use clamps listed below(order separately).

Low-loss Power Tappers – Multi-band800 – 2200 MHzIndoor and outdoor use

2-way-Tapper 800–2200 7.0 /1.0dB2-way-Tapper 800–2200 10.4/0.4dB2-way-Tapper 800–2200 15.1/0.1dB




736 805

P1

P2

Input

K 63 23 60 67

162

163

AccessoriesMounting hardware and downtilt kits

164

Accessories

Mounting Configurations 165

A-Panels / Eurocell Panels Dimensions 166

Three Sector Clamps and Masts 167

Clamps 168

Downtilt kits 170

F-PanelsDimensions 172

Detailed Connector Position 174

Clamps 175

Downtilt kits 177

Slant Compensation 179

Azimuth Adjustment Tools 180

Omnidirectional AntennasClamp for larger Mast Diameters 182

Side-mounting Brackets 183

Page

165

Mounting Configurations

Small Pipe Diameter

Off-set Tilt

Flat Surface

Large Pipe Diameter

Off-set

Standard Tilt

Not applicable for Eurocell Panels with connector positionrearside.

166

A-Panels / Eurocell PanelsAntenna Dimensions

-45° +45°

58

262

116

64

72

9

A B C

Bottom view

A 256 mm 656 mm 1296 mm 1936 mm 2580 mmB 310 mm 710 mm 1350 mm 1990 mm 2634 mmC 350 mm 750 mm 1390 mm 2030 mm 2674 mm

A-Panelswith 65° and 90° Half-power Beam Width

A Corresponds with the antenna height mentioned in the technical data.

A 264 mm 654 mm 974 mm 1294 mm 1934 mm 2254 mm 2574 mmB –– 710 mm 1030 mm 1350 mm 1990 mm 2310 mm 2630 mmC –– 750 mm 1070 mm 1390 mm 2030 mm 2350 mm 2670 mm

Eurocell Panels


64

72

9

A B C

258

Top view

103

167

A-Panels – 3 Sector Panel ArrangementMounting Hardware3 Sector Clamp Kit / Pipe Mast with Flange Base Slim and unobstrusive design Nearly cylindrical optical appearance with small outer diameter Suitable for all A-Panels (Single-band, Dual-band)

Type No. 742 033 742 034

Angle between antennas 120° 120°Suitable for mast diameter 114.3 mm 139.7 mmType No. of pipe mast 742 035 742 036(please order separately)Number of pieces 2 x 3 sector clamp 2 x 3 sector clamp

2 x mounting support 2 x mounting supportclamp clamp

Material – 3 sector clamp Hot-dip galvanized steel Hot-dip galvanized steel– Mounting support Aluminum Aluminum

clamp– Screws Stainless steel Stainless steel

Outer diameter (Dout) of the3 A-Panel Arrangement 460 mm 482 mm

3 Sector Clamp Kit

Type No. 742 035 742 036

Pipe diameter D 114.3 mm 139.7 mmaccording DIN 2448Wall thickness pipe 6.3 mm 4 mmPipe length 3000 mm 3000 mmFlange diameter 210 mm 265 mmFlange thickness S 14 ± 1 mm 19 ± 1 mmHole circle diameter 170 mm 225 mmNumber of holes 6 6Hole diameter 18 ± 1 mm 18 ± 1 mmEnclosed bolts thread x length M16 x 100 mm M16 x 100 mmHot-dip galvanized steel Quality min. 8.8 Quality min. 8.8Weight 60 kg 55 kgMaterial pipe mast S355 J2H (St 52-3N) DIN EN 10210-1Material flange base S235 JR G2 (RSt 37-2) DIN EN 10025

Pipe Mast with Flange Base

Maximum permissible load: According DIN 4131 and DIN 4132Fatigue class K2

3000

129

± 2

S

225

265

742 036

170

210

742 035

18±1

D

Dout60°

64 ± 0.59

D

C

B

A

Bottom view without downtilt kit

FE

742 033 114.3 88 217 207 49 45742 034 139.7 100 236 228 49 45

Type No. A B C D E F

all dimensions in mm

Torque 8 NmMounting support clamp

3 sector clamp

168

A-Panels30° Half-power Beam WidthMounting Hardware

560

116

180.5348

177

A B

∅ 11

Bottom view

Side view

A 656 mm 1296 mm 2580 mmB 584 mm 1224 mm 2504 mm

A-Panels with 30° Half-power Beam Width


Clamps

733 736 2 clamps Mast: 50 – 125 mm diameter 5.9 kg 1K 61 14 03 2 clamps Mast: 116 – 210 mm diameter 4.6 kg 1K 61 14 04 2 clamps Mast: 210 – 380 mm diameter 6.5 kg 1K 61 14 05 2 clamps Mast: 380 – 521 mm diameter 9.4 kg 1

Type No. Description RemarksWeight Units perappr. antenna

Downtilt kits

656 mm 0 – 33°1296 mm 0 – 16° 733 695 3.4 kg2580 mm 0 – 8°

Antenna height Downtilt angle Type No. Weight

Pair of clamps K 61 14 03

Downtilt kit 733 695

169

A-Panels 65° and 90° / Eurocell PanelsMounting HardwareClamps

258

103

654974129419342254

Eurocell PanelsAntenna height: 654 mm

974 mm1294 mm1934 mm2254 mm

and all A-Panels 65° and 90°

731 651 738 546 733 678

258

103

264

Eurocell Panels Antenna height: 264 mm

Small Pipe 28 – 64 mm 731 651 22 – 30 330 g see sketch

Large Pipe 50 – 115 mm 738 546 19 – 24 1.0 kg see sketch

Off-set 60 – 115 mm 733 677 117 – 124 2.0 kg see sketch115 – 210 mm 733 678 146 – 160 2.6 kg see sketch210 – 380 mm 733 679 148 – 168 4.0 kg see sketch380 – 521 mm 733 680 150 – 175 5.3 kg see sketch

Description Mast diameter Type No.Distance A Weight Units per

mm appr. antenna

258

103

2574

Eurocell PanelsAntenna height: 2574 mm

A

170

A-Panels / Eurocell PanelsMounting HardwareDowntilt kit

654 mm 0° – 30° 737 972

974 mm 0° – 21° 737 973

1294 mm 0° – 16° 737 974 737 978 appr. 2.8 kg

1934 mm 0° – 11° 737 975

2254 mm 0° – 9° –

Antenna height Downtilt angle Type No. Type No. Weight

Downtilt angle

Antenna height: 654 mm974 mm

1294 mm1934 mm2254 mm

Downtilt kit Downtilt kitwith scale without scale*

* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.

Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.

Use the downtilt kit together withthe clamps (see page 167 and 169)

036

912

1520

Scale

Screws supplied

171

A-Panels / Eurocell PanelsMounting HardwareDowntilt kits

Suitable for:

A-Panels with an antenna height of 2580 mm

Eurocell Panels with an antenna height of 2574 mm

Type No. 737 971Downtilt angle: 0° – 8°

The downtilt kits should only be mounted with two clamps 738 546

036

9 1215

20

Scale

Screws supplied

Type No. 737 976Downtilt angle: 0° – 8°

036

912

1520

Scale

Screws supplied

172

F-Panel AccessoriesDimensions of F-Panels with33° Half-power Beam Width

Dimensions [mm](‘A’ corresponds to the antenna height given on the data sheet)

A B C

209 263 303

342 396 436

662 716 756

982 1036 1076

1302 1356 1396

1942 1996 2036

64

72

9

262

59

Top viewRadome depth 59 mm

Front view

A B C

173

F-Panel AccessoriesDimensions of F-Panels with60° – 105° / 160° Half-power Beam Width

Dimensions [mm](‘A’ corresponds to the antenna height given on the data sheet)

A B C

182 236 266

342 396 426

502 556 586

662 716 746

702 756 786

982 1036 1066

1302 1356 1386

1622 1676 1706

1942 1996 2026

2582 2636 2666

35

ø 8.5

64

A B C

Top viewradome depth 49 mm

Front view


155

49

25


69

155

155

3625

Top viewAntenna with subreflector

142

174

F-Panel AccessoriesDimensions of F-PanelsDetailed connector position

76

52

58



60° – 65° Half-power Beam Width

90° – 160° Half-power Beam Width

33° Half-power Beam Width



175

Type No. Mast Weight Unitsdiameter per antenna

738 546 50 – 115 mm appr. 1 kg 2

F-Panel AccessoriesClamps for F-Panels with33° / 60° – 160° Half-power Beam Width

Type No. 734 362

Type No. 738 546

Type No. Mast Antenna Weight Unitsdiameter height per

appr. antenna

734 360 34 – 60 mm 182 … 1942 mm 60 g 1734 361 60 – 80 mm 182 … 1942 mm 70 g 1734 362 80 – 100 mm 182 … 1942 mm 80 g 1734 363 100 – 120 mm 182 … 1942 mm 90 g 1734 364 120 – 140 mm 182 … 1942 mm 110 g 1734 365 45 – 125 mm 182 … 1942 mm 80 g 1

738 546 50 – 115 mm 182 ... 2582 mm 1 kg 2

33° HPBW 60°–160° HPBW

60°–160° Half-power Beam Width


176

F-Panel AccessoriesMounting Hardware2 x F-Panel Mounting Kit

Use the 2 x F-Panel Mounting Kit together with the following mounting accessories

For a three sector panel arrangement,use the mounting kit type no. 742 113 together with the three sector clamp(see page 167).

For arranging two F-Panels 65°, 90° side by side (on air combining).

The mounting kit consists of two mounting plates.

No of units 2Suitable for F-Panels 65°, 90° with max. height of 2 mMaterial Hot-dip galvanized steelWeight approx. 1.6 kgMounting Screws are supplied

Type No. 742 113

2 x F-Panel Mounting Kit

03 69

1215

20

Configuration with mechanical downtiltConfiguration without mechanical downtilt

10 mm

10145°

1015

41

64±0.5

64±0.5

75

∅ 91020

12 18

19

116

270

15

∅ 9

738 546 1 clamp Mast: 50 – 115 mm diameter 1.0 kg 2733 677 1 offset clamp Mast: 60 – 115 mm diameter 2.0 kg 2733 678 1 offset clamp Mast: 115 – 210 mm diameter 2.6 kg 2733 679 1 offset clamp Mast: 210 – 380 mm diameter 4.0 kg 2733 680 1 offset clamp Mast: 380 – 521 mm diameter 5.3 kg 2737 978 1 downtilt kit Downtilt angle: 2.8 kg 1

depending on antenna height

Type No. Description RemarksWeight Units perappr. antenna

177

F-Panel AccessoriesDowntilt Kit for F-Panels with33° – 160 °Half-power Beam Width

Antenna height: 342 mm662 mm982 mm

1302 mm1622 mm1942 mm2582 mm

036

912

1520

Scale

Screws supplied

Use the downtilt kit together with2 clamps 738 546 (see page 175).

342 mm 0° – 54° –

662 mm 0 °– 30° 737 972

982 mm 0° – 21° 737 973

1302 mm 0° – 16° 737 974 737 978 appr. 2.8 kg

1622 mm 0° – 13° –

1942 mm 0° – 11° 737 975

2582 mm 0° – 8° 737 971





178



F-Panel AccessoriesDowntilt Kit for F-Panels with60° – 160° Half-power Beam Width

108 6 4

20

Scale

Use the downtilt kit togetherwith the clamps (see page 175).

Screws supplied

Antenna height: 342 mm502 mm662 mm982 mm

1302 mm

342 mm 0° – 40° –

502 mm 0° – 25° 732 322

662 mm 0° – 20° 732 321

982 mm 0° – 14° 732 318732 327 appr. 1.0 kg

1302 mm 0° – 10° 732 317



179

F-Panel AccessoriesSlant Compensation Kit for F-Panels with60° – 160° Half-power Beam Width

Use the slant compensation kittype no. 732 319 together with the

clamps (see page 175).

Weight: appr. 200 g

77 mm

57 mm

Type No. 732 319

180

F-Panel AccessoriesAzimuth Adjustment Tool for F-Panels with60° – 160° Half-power Beam Width

Precise azimuth angle adjustment for mast mounted antennas can easily be achieved by using the azimuthadjustment tool.

Instruction:

– Use a map to work out the angle between the designed antenna azimuth direction and target object

(church, building, mountain peak)

– Set this angle on the scale of the adjustment tool

– Push the adjustment tool onto the antenna fixture and tighten the fixing screws

– Use the telescope to aim at the target object, if necessary, use elevation compensation

– Then rotate the antenna until the target object appears in the telescope objective.

Type No. 735 700

fixing screws

scale

target object

elevationcompensation

181

Elevationcompensation

Precise azimuth adjustment for mast mounted antennas can easily be achieved by using the azimuth adjustment tool.

A-Panel / Eurocell Panel / F-PanelAccessoriesAzimuth Adjustment Tool

This tool is suitable to all types of Eurocell Panels

• Panels• A-Panels 65°/90°• F-Panels• XPol F-Panels

Instruction:

– Use a map to work out the angle between the designed antenna azimuth and target (church, building, mountain peak).

– Set this angle on the scale of the adjustment tool.

– Place the adjustment tool onto the antenna and tighten the clamping device.

– Use the telescope to aim at the target object, if necessary, use elevation compensation.

– Then rotate the antenna until the target object appears in the telescope.

* Observe the position of the stopper when fitting the azimuth adjustment tool.

F-Panel

Clamping device

Scale

Panel

* Move the stopper to central position

Target object

F-Panel

Clamping device

Scale

A-Panel

Target object

XPol F-Panel

XPol F-Panel

Type No. 738 440

Target object

F-Panel

182

Type No. 738 908

Side-mounting ClampOmnidirectional AntennasLarge Pipe

For mast diameters of 94 – 125 mm

ab

b

Antenna

Mast

183

Side-mounting BracketOmnidirectional Antennas

Type No. 737 398

Bracket At the top andat the bottom

Fits for antenna 900 MHz 1800 MHztype no: 736 347 739 785

736 348 738 187736 349 739 404736 350 737 190736 351738 664

Side-mounting bracket(for mast diameters of 40 – 105 mm)

Side-mounting is possible for four fixed distances between the tubular mast and the antenna:

A = 100 mm = 0.3 λ A = 160 mm = 0.5 λ A = 240 mm = 0.75 λ A = 80 mm = 0.5 λ

PipeD

HorizontalRadiation Pattern

SpacingA

Curve

900 MHz (holes 1 and 3) 1800 MHz (hole 2)

A

bracket

antenna

bracket

mast

antenna-base

D

hole 2

A

D

hole 3

A

D

hole 1

A

D

hole 3

direction from mast to antenna

100 mm

160 mm40 mm

240 mm

3

0

dB

PipeD


SpacingA

Curve


100 mm

160 mm100 mm

240 mm

3

0

dB

SpacingA


PipeD

Curve


80 mm

3

0

dB

40 mm

100 mm

A

∅ D Type No. 737 398

184

Type No. K 61 33 5 K 61 33 6

Side-mounting BracketsOmnidirectional Antennas900

For mast diameters of 40 – 105 mm

Side mounting is possible for three fixed distances betweenthe tubular mast and the antenna:

100 mm = 0.3 λ 160 mm = 0.5 λ 240 mm = 0.75 λ

PipeD

40 mm

100 mm

SpacingA

Curve

100 mm

160 mm

240 mm

100 mm

160 mm

240 mm

Additional gainto the nominal valueof the antenna gain

2 dB

3 dB

2 dB

2.5 dB

3.5 dB

2.5 dB

3

0

dB

3

0

dB




Bracket at the bottom at both the toponly and the bottom

Fits for antennatype no. K 75 11 6 .. 738 779

K 75 15 6 .. 741 558

A

ø D

K 61 33 6

185

9986

.276

/010

1/8/

ZW

/HA

Sub

ject

to

alte

ratio

n.

KATHREIN-Werke KG . Telephone (++49)8031/184-0 . Fax (++49)8031/184-991Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . D-83004 Rosenheim . Germany

Internet: http://www.kathrein.de

Antennen . Electronic

Please contact for:

Sales queries, orders, catalogues or CD-ROM:

Fax: (++49)8031/184-820E-Mail: [email protected]

Technical Information:Fax: (++49)8031/184-973E-Mail: [email protected]

Antenna

Documents

fundamental

long service

high impact

mechanical

wind velocity

weight wind

azimuth adjustment

mechanical