Antec Power Supply Solution Steps

Antec Power SupplySolution Steps

The following presentation highlights the steps taken

to address the Antec Power Supply issue.

STEP 1: L Bracket #1

First, you need an “L Bracket” with the following dimensions:

Antec Power SupplySolution Steps

STEP 2: L Bracket #2

You will also need another “L Bracket” with the following dimensions:

Antec Power SupplySolution Steps

STEP 3: Attach the “L Brackets” to the Power Supply [Fan Up] using standard mounting screws <3/16”.

Antec Power SupplySolution Steps

STEP 3: Attach the “L Brackets” to the Power Supply [Fan Up] using standard mounting screws <3/16”.

Antec Power SupplySolution Steps

STEP 4: Drill 2 holes in the chassis aligned to the L Bracket “Threaded Holes” or “Pem-Nuts”.

Antec Power SupplySolution Steps

STEP 5: Attach the “L Brackets” to the chassis with #6 Flathead Phillips machine screws through bottom.

Antec Power SupplySolution Steps

Antec Power SupplySolution Steps

These images show the finished product.