ANSWERS. For stability / low centre of gravity / to make it heavy / to stop it falling over / so that feet can be attached / ease of manufacture Lower.

ANSW

E

RS

For stability / low centre of gravity / to make it heavy / to stop it falling over / so that feet can be attached / ease of manufacture

Lower melting point / does not rust / easier to cast / easier to cut and shape / does not need a finish

To prevent it slipping / to prevent it marking surfaces / improves sound insulation / improves stability

Sand casting

Crucible

Runner

Riser

Drag

Anti skid – Rubber feet (also accept Wide - non-slip rubber treads)

Supports up to 150kg

500mm height (top step)

White, plastic dip-coated finish

Folds to a compact size

Oak, Ash etc.

Available in wide sheets / no need to glue strips together / cheaper / has strength in two directions / no knots / won’t warp

Cut one out then use it as a template / Cut both when clamped together / CNC

Jigsaw

Power Sander / orbital sander / hand sander / sander

Varnish / stain / wax / oil / linseed oil

A scale model of a human

Three jaw chuck / chuck

Tool post

Tailstock

Guard down / remove chuck key / ensure tool post is clear of the chuck / ensure work is held tight / ensure tool is held securely

Centre drill / slocombe drill / combination drill

Facing off / facing

Taper turning / chamfering / tapering

Parting off / parting

Protection / can be hung on display / can see through the packaging / can add product information / easily moulded to shape / can be re-cycled / looks good / easy to carry etc.

Thermo plastic

Vacuum forming

Stage C

Stage D

Pine etc.

Housing joint / through housing joint

Improved appearance / can’t see the joint from the front / joint can’t slide out

Forstner bit / forstner drill / forstner

Any two from - Remove pencil marks / coarse then fine glasspaper / raise the grain / wipe with white spirit / wire wool / use filler / remove excess glue / remove dust / plane / use the scraper

Wood lathe / lathe

Draw diagonals on the end faces of the blank

Saw down one diagonal for the fork centre to fit into

Plane the edges (corners) off the blank

Parting tool

Countersink bit / rose bit / countersink rose

To make the heads of the screws flush with the surface of the wood

Looks more interesting / more dynamic / less boring / less boxy / anything suggesting ‘looks

The slope prevents CD’s falling forwards / the back stops CD’s falling backwards / folded down front eases access / can be screwed onto a wall

Rounded corners and folded edges reduce the possibility of cuts

Marking out

Folding

Cutting to shape

Drilling

Any two from - Corrosion protection / improved aesthetics / makes it look better / matches the environment

142

102