ANSI B73.1 - KOP Pump

The Quality Pump for Your Application

9196ANSI B73.1

Heavy Duty Process Pump

The American National Standards Institute (ANSI) sets standards for manufacturers, producers, engineers and technicians for several products.One such standard is the B73.1 for centrifugal pumps, which covers 28 pump sizes and sets key dimensions for each of the sizes. The end user is guaranteed a quality product that meets specific industry requirements.

ANSI PUMP

The KOP Series 9196 ANSI standardpumps are manufactured for a wide rangeof flow and head requirements followASME and ANSI B73.1 specifications. ThePerformer Series combines high efficiency,maximum performance, and extendedMean Time Between Failure (MTBF) forreduced maintenance cost.

Pump Designation

Long Lasting With High Quality

18 Months Warrantee Period with 9196

ApplicationsThe 9196 ANSI-standard pump will handle

corrosive, toxic and abrasive process liquids such as acids, bases and solvents. This pump can be found in Chemical, Petro-chemical, Pulp

& Paper, Plastic, Refining and Pharmaceutical plants. A wide range of alloys, options and

sealing systems makes it an ideal choice for almost any application.

1KOP 9196 ANSI B73.1

SpecificationsCapacities : Up to 1,200 m3/hr

Head : Up to 222 meters

Pressure : Up to 2586 kPa

Power : Up to 224 kW

Temperature : Up to 260°C

Drives : Motors, engines, steam turbine

Liquids : Chemical, pulp and paper, all process

Materials : Standard Materials: CD4MCu, Alloy 20, Hastelloy CCustom Materials Available : Nickel Alloy, Titanium, TiPd


Features & Benefits✓ ANSI B73.1 Standard Dimensions, can fit

and replace with the same dimensions to

all ANSI B73.1 process pump.

✓ Parts interchangeability for minimum

spare parts inventory to G-Series model

3196 with same hydraulic design and

best performance

✓ Back pull-out design for quick inspection

against contaminations long life and

reliability

✓ Wide range of material available

Construction Details All dimensions in inches and (mm).

STK MTK LTK XLKShaft Diameter at Impeller .75 (19) 1 (25) 1.25 (32) 1.5 (38)

Diameter in Stuffing Box/Seal Chamber (Less Sleeve)(With Sleeve)

1.3751.125

(35)(29)

1.751.5

(45)(38)

2.1251.875

(54)(48)

2.52

(64)(51)*

Diameter Between Bearings 1.5 (38) 2.125 (54) 2.5 (64) 3.125 (79)Diameter at Coupling 0.875 (22) 1.125 (29) 1.875 (48) 2.375 (60)Overhang 6.125 (156) 8.375 (213) 8.375 (213) 9.969 (253)Maximum Shaft Deflection 0.002 (0.05)Shaft Deflection Index (L3/D4)(With Sleeve) (Less Sleeve)

14364

11663

4829

6225

Sleeve O.D. thru Stuffing Box/Seal Chamber

1.375 (35) 1.75 (45) 2.125 (54) 2.5 (64)*

Bearings Radial 6207 6309 6311 6313Thrust 5306 5309 7310 5313Bearing Span 4.125 (105) 6.75 (171) 6.875 (164) 9.25 (235)Average L'10 Bearing Life 17,500 Hours

Conical Bore Seal Chamber Bore 2.875 (73) 3.5 (89) 3.875 (98) 4.75 (120)*Stuffing Box

Bore 2 (51) 2.5 (64) 2.875 (73) 3.375 (86)*

Power Limits

HP (kW) per 100 RPM 1.1 (0.82) 3.4 (2.6) 5.6 (4.2) 14 (10.5)**

Temperature

Maximum Liquid Temperature — Oil/Grease Lubrication without Cooling

350° F (177° C)

Maximum Liquid Temperature —Oil Lubrication with High Temp. Option

700°F (370° C)

Casing Corrosion Allowance .125 (3)* 17 inch sizes have 21⁄4 inch (57) shaft diameters in stuffing box/seal chamber with sleeve. Shaft sleeve O.D. is 23⁄4 inches (70) for packing and 21⁄2 inches (64) for mechanical seals.

Seal chamber bore is 43⁄4 inches (121). Stuffing box bore is 35⁄8 inches (92).** 17 inch sizes power limit per 100 RPM is 20HP (15kW).

FeaturesThe 9196 casing is a self venting, top centerline

discharge with a fully confined gasket. Class 150 lb.FF flanges are standard, with optional Class 150 lb.RF and both FF and RF Class 300 lb. flangesavailable. All ductile iron and 316SS casings aresupplied with casing drains.

ImpellerThe impeller is a fully open design that significantly

reduces clogging. Integral back pump out vanes reduce stuffing box pressure, prolonging mechanical seal life. Impeller and casing are matched to achieve high efficiency and low NPSH. Sealed by an O-ring, the threaded area is protected against corrosion.

A Low Flow Impeller is available for select sizes of STK frame pumps. This Low Flow Impeller helps extend MTBF for those applications operating far to the left of the Best Efficiency Point (BEP) of the standard pump.

Power EndThe power end has a bearing frame made of

heavy-duty cast iron construction. Designed with enlarged oil reservoir for better dissipation of heat and bulls-eye sight glass for easy monitoring of oil level.

Bearing ProtectionInpro/Seal™ Bearing Isolator,

designed especially for KOP 9196 Pump,provides both static and dynamicsealing using contact technology topositively seal the bearings from

environmental contamination.

316 SS power end material is available on request.All Power Ends are backed by a 3 years warranty.

Open Impeller

Low Flow Impeller


BearingBearing fits are precision bored and all bearings meet or exceed minimum ANSI L10 life or 17,500 hours.

ShaftThe shaft is available with hook sleeve or in solid shaft construction.Low defection (less than 0.002 in.) at seal face for longer seal and bearing life

Quality EngineeringThe 9196 Series delivers variety, durability, standardized options and configurations unequalled in the industry.

Hook Sleeve: a steel shaft end-to-end

accommodation a hook sleeve

Solid Shaft: steel end-to-end or stainless alloy

end-to-end

Large oil sump: Bearing

run cooler, last longer.

The bearings supporting the axial load are mounted in a bearing carrier, separate from the

pump frame, to allow adjustment of the impeller in the casing.


CBS CBL CFB

Seal Chamber Options

Cylindrical Bore Standard Cylindrical Bore Large Conical Flow Breaker

Seal Chamber Options

CBS: For standard packing seal

CBL: Improved lubrication and cooling of seal faces extend mechanical seal life.

CFB: Conical seal chamber with flow breaker extend seal life and provide seal

self-flushing capability.

11V

Q6V

C1V

P6V

D6V


Standard Mechanical Seal Options

02T

DescriptionCode

11V Q6V C1V P6V D6V 02T

Type Component Component Cartridge Cartridge Cartridge Component

Single/Double Single Double Single Double Double Single Outside

DesignBalnace, Enclosed

SpringMulti-Spring, Back to

BackBalance, Enclosed

SpringBalance, Enclosed

Spring

Balnace, Rotaing Seat, Enclosed Spring

with pumping ring

Balance, Enclosed Spring

Seal Faces Carbon/SiC/VitonSiC/SiC-

Carbon/SiC/VitonCarbon/SiC/Viton

SiC/SiC-Carbon/SiC/Viton

SiC/SiC-Carbon/SiC/Viton

SiC/SiC/PTFE

API - 54 - 54 52, 53 62

Note: Mechanical seal type and material combination are as on request to meet the required application.

Pump Dimensions 9196

Dimensions are in inches and (mm).


Group Pump SizeANSI

DesignationDischarge

SizeSuction Size X A B D SP

Bare Pump Weight Lbs.

(kg)

STK

1x1.5-6 AA 1 1.5

6.5 (165) 13.5 (343) 4 (102) 5.25 (133) 3.75 (95)

84 (38)

1.5x3-6 AB 1.5 3 92 (42)

2x3-6 2 3 95 (43)

1x1.5-8 AA 1 1.5 100 (45)

1.5x3-8 AB 1.5 3 108 (49)

MTK/LTK

2x3-8 A60 2 3 9.5 (242)

19.5 (495) 4 (102) 8.25 (210)

3.75(95)

220 (91)

3x4-8 A70 3 411 (280) 220 (100)

3x4-8G A70 3 4

1x2-10 A05 1 28.5 (216)

200 (91)

1.5x3-10 A50 1.5 3 220 (100)

2x3-10 A60 2 3 9.5 (242) 230 (104)

3x4-10 A70 3 4 11 (280) 265 (120)

3x4-10H A40 3 4 12.5 (318)

19.5 (495) 4 (102) 10 (254)

275 (125)

4x6-10 A80 4 613.5 (343) 305 (138)

4x6-10H A80 4 6

1.5x3-13 A20 1.5 3 10.5 (267) 245 (111)

2x3-13 A30 2 3 11.5 (292) 275 (125)

3x4-13 A40 3 4 12.5 (318) 330 (150)

4x6-13 A80 4 6 13.5 (343) 405 (184)

XLK

6x8-13 A90 6 8 16 (406)

27.875(708)

6 (152) 14.5 (368) 5.25 (133)

560 (254)

8x10-13 A100 8 1018 (457)

670 (304)

6x8-15 A110 6 8 610 (277)

8x10-15 A120 8 10

19 (483)

740 (336)

8x10-15G A120 8 10 710 (322)

8x10-16H 8 10 850 (385)

4x6-17 4 6 16 (406) 650 (295)

6x8-17 6 8 18 (457) 730 (331)

8x10-17 8 10 19 (483) 830 (376)

KOP (Thailand) Co., Ltd.

www.koppump.com

[email protected]

1312/3 Anamai Ngamcharoen 25, Tha Kham,

Bangkhuntien, Bangkok 10150

(+66)099-328-8328

(+66)02-490-4906-7

The Efficient Flow Solution

KOP-9196-08-05-2020-PD

ANSI B73.1 - KOP Pump

Documents