Annex to declaration of accreditation (scope of accreditation) Normative document: EN ISO/IEC 17065:2012 Registration number: C 001 of DEKRA Certification B.V. This annex is valid from: 14-11-2018 to 01-05-2022 Replaces annex dated: 05-11-2018 Location(s) where activities are performed under accreditation Head Office Meander 1051 6825 MJ Arnhem The Netherlands Dutch Accreditation Council RvA Page 1 of 29 This annex has been approved by the Board of the Dutch Accreditation Council, on its behalf, J.A.W.M. de Haas Director of Operations Location Certification Scheme DEKRA Certification B.V. Head office Meander 1051 6825 MJ Arnhem The Netherlands KEMA-KEUR, ENEC, Low power measurements, Power capacitors - Low-voltage power factor correction banks, CCV-Certificatieschema, National Guideline for the KOMO®, EMC Directive, ATEX Directive, Machinery directive, EPA Energy Star program, NTA 8081, Construction products regulation (CPR) Unit 1-14, 6/F Fuk Shing Commercial Building, Fanling, 28 On Lok Mun Street Hong Kong China KEMA-KEUR, Low power measurements. 10F #250 Jiangchangsan Road, Building 16 Headquarter Economy Park, Shibei Hi-Tech Park 200436 Shanghai China KEMA-KEUR, Low power measurements. DEKRA House, Block A3 No 3 Qiyun Road 510630 Guangzhou China KEMA-KEUR, Low power measurements. Product 1 / Product Group Certification Scheme 2 Standard / normative document 3 1 Definitions in accordance with ISO 9000:2005, 3.4.2 2 If there is a referral to a scope (Sxxx), this constitutes a scheme of an accepted scheme owner. The accepted version is mentioned on the concerning scope of the scheme owner. 3 For normative documents the most current version of the document is mentioned. In case of schemes for which reference is made to an accepted scheme owner, the version indicated in the scope of acceptance is meant.
29
Embed
Annex to ISO/IEC 17065:2012 declaration of accreditation for ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 to 01-05-2022 Replaces annex dated: 05-11-2018
Location(s) where activities are performed under accreditation
Head Office
Meander 10516825 MJArnhemThe Netherlands
Dutch Accreditation Council RvA Page 1 of 29
This annex has been approved by the Board of theDutch Accreditation Council, on its behalf,
J.A.W.M. de HaasDirector of Operations
Location Certification Scheme
DEKRA Certification B.V. Head officeMeander 10516825 MJ ArnhemThe Netherlands
KEMA-KEUR, ENEC, Low power measurements, Powercapacitors - Low-voltage power factor correction banks,CCV-Certificatieschema, National Guideline for theKOMO®, EMC Directive, ATEX Directive, Machinerydirective, EPA Energy Star program, NTA 8081,Construction products regulation (CPR)
Unit 1-14, 6/F Fuk Shing Commercial Building,Fanling, 28 On Lok Mun StreetHong KongChina
KEMA-KEUR, Low power measurements.
10F #250 Jiangchangsan Road, Building 16Headquarter Economy Park, Shibei Hi-Tech Park200436 ShanghaiChina
Certification Scheme2 Standard / normativedocument3
1 Definitions in accordance with ISO 9000:2005, 3.4.22 If there is a referral to a scope (Sxxx), this constitutes a scheme of an accepted scheme owner. The accepted version is mentioned on the concerning scope of the scheme owner.3 For normative documents the most current version of the document is mentioned. In case of schemes for which reference is made to an accepted scheme owner, the version indicated in the scopeof acceptance is meant.
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 2 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Location Arnhem
Cables and cords(CABL)
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
IEC 60227*IEC 60245*IEC/EN 60799EN 13501EN 50143EN 50214EN 50525EN 50288EN 50399EN 50618HD 21 / HD 22HD 603HD 604IEC 60055IEC 60092IEC 60141IEC 60502IEC 60800IEC 60840IEC 61089IEC 62067IEC 62271-209NEN 3172NEN 3616NEN 3619NEN 3620NEN 3630NF C34-125IEEE Std 404IEEE Std 48DEKRA K 42DEKRA K 102DEKRA K 145DEKRA K 146DEKRA K 151DEKRA K 152DEKRA K 156DEKRA K 157DEKRA K 158DEKRA K 160DEKRA K 161
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 3 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
DEKRA K 162DEKRA K 163DEKRA K 164DEKRA K 165DEKRA K 167DEKRA K 168DEKRA K 169DEKRA K 170DEKRA K 171DEKRA K 175DEKRA K 176DEKRA K 177DEKRA K 178DEKRA K 179BS 6004, BS 6007BS 4553, BS 5467BS 6231, BS 6346BS 6387, BS 6500BS 6622, BS 6724BS 6883, BS 7211BS 7629, BS 7835BS 7846, BS 7889BS 8491, BS EN 50288-7DIN VDE 0815DIN VDE 0250
Cables and cords(CABL)
KEMA-KEUR<HAR>
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
EN 50143EN 50214EN 50525HD 21HD 22
Capacitors ascomponents
KEMA-KEUR
Initial assessment:
Type approval Initial inspection production location
Surveillance:
Routine Inspection production location Re-examination
LITE Energy Star ENERGY STAR® ProgramRequirements for Lamps(Light Bulbs)
ENERGY STAR® ProgramRequirements for DecorativeLight Strings
ENERGY STAR® ProgramRequirements forLuminaires
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 15 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
Directive 2006/42/ECMachinery
The accreditation for the specified activities is suitable for notification
Product / productgroup
Module / article Conformity assessmentprocedure
1. Circular saws(single- or multi-blade)for working with woodand material withsimilar physicalcharacteristics or forworking with meat andmaterial with similarphysical characteristics,of the following types:
1.1. Sawingmachinery with fixedblade(s) duringcutting, having afixed bed or supportwith manual feed ofthe workpiece orwith a demountablepower feed;1.2. Sawingmachinery with fixedblade(s) duringcutting, having amanually operatedreciprocating saw-bench or carriage;1.3. Sawingmachinery with fixedblade(s) duringcutting, having abuilt-in mechanicalfeed device for theworkpieces, withmanual loadingand/or unloading;
1.4. Sawingmachinery withmovable blade(s)during cutting,having mechanicalmovement of the
EC-type examination Annex IX
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 16 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
3. Thicknessers forone-side dressinghaving a built-inmechanical feeddevice, with manualloading and/orunloading forwoodworking.
EC-type examination Annex IX
4. Band-saws withmanual loading and/orunloading for workingwith wood and materialwith similar physicalcharacteristics or forworking with meat andmaterial with similarphysical characteristics,of the following types:
4.1. Sawingmachinery with fixedblade(s) duringcutting, having afixed orreciprocating-movement bed orsupport for theworkpiece;
4.2. Sawingmachinery withblade(s) assembledon a carriage withreciprocatingmotion.
EC-type examination Annex IX
5. Combined machineryof the types referred to
EC-type examination Annex IX
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 17 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
in points 1 to 4 and inpoint 7 for working withwood and material withsimilar physicalcharacteristics.
6. Hand-fed tenoningmachinery with severaltool holders forwoodworking.
EC-type examination Annex IX
7. Hand-fed verticalspindle mouldingmachinery for workingwith wood and materialwith similar physicalcharacteristics.
EC-type examination Annex IX
8. Portable chainsawsfor woodworking. EC-type examination Annex IX
Directive 2014/30/EUElectromagnetic compatibility
The accreditation for the specified activities is suitable for notification
Electric and electronicappliances (apparatuswith electrical and/orelectronic parts liable togenerateelectromagneticdisturbance, or theperformance of which isliable to be affected bysuch disturbance)
EU-type examination (module B) Annex III, part A
Directive 2014/34/EUEquipment and protective systems intend for use in potentially explosive atmospheres
The accreditation for the specified activities is suitable for notification
Equipment category M1 EU-type examination (module B) Annex III
Annex to declaration of accreditation (scope of accreditation)Normative document: EN ISO/IEC 17065:2012Registration number: C 001
of DEKRA Certification B.V.
This annex is valid from: 14-11-2018 tot 01-05-2022 Replaces annex dated: 05-11-2018
Dutch Accreditation Council RvA Page 18 of 29
Product1 / ProductGroup
Certification Scheme2 Standard / normativedocument3
of equipment-group I –electrical equipmentand non-electricalequipment
Conformity to type based on quality assurance of theproduction process (module D)
Annex IV
Conformity to type based on product verification (moduleF)
Annex V
Conformity based on unit verification (module G) Annex IX
Equipment category 1of equipment-group II,explosive atmospheredue to gases, vapoursor mists – electricalequipment and non-electrical equipment
EU-type examination (module B) Annex III
Conformity to type based on quality assurance of theproduction process (module D)
Annex IV
Conformity to type based on product verification (moduleF)
Annex V
Conformity based on unit verification (module G) Annex IX