3D Scanning Microscope 10 - 70 lpcm | 24 - 180 lpi for Engraving, Coating & Anilox High Volume Analysis AniCAM-HVLS QC X/ Y/ Z & 3-dimensional analysis + + + + + + + + Volume Die Cut plate Tri-Helical Anilox roll Etched Embossing Cylinder Wall Width Cell Depth Cell Opening Screen Count Engraving Angle
3
Embed
Ani Scanning Microscope - All Printing ResourcesThe AniCAM-HVLS 3D Scanning Microscope is a very professional instrument, it’s operation is really simple: For volume readings place
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
3D
Sca
nn
ing
Mic
rosc
ope
10 - 70 lpcm | 24 - 180 lpi
for Engraving, Coating & Anilox High Volume Analysis
AniCAM-HVLS QC
X/ Y/ Z & 3-dimensional analysis
++
+++
+++
Volume
Die Cut plate
Tri-Helical Anilox roll
Etched Embossing Cylinder
Wall WidthCell Depth
Cell Opening Screen Count Engraving Angle
The AniCAM-HVLS 3D Scanning Microscope is a very professional instrument, it’s operation is really simple: For volume readings place the portable system on top of your engraved roll, select the appropriate setup and click in the 3D-Scan button to get a full reading. The image will then be transferred to an Analysis window, which simultaneously displays the info page with the volume and depth readings. The system generates a report which can be printed or the data can be exported to a database or spreadsheet program for further analy-sis.
The AniCAM camera window helps you to find the target area
Cell Info window
Rotatable 3D View of the cells
„Electronic Cut“ Cell Profiling
An Average Mode allows to predefine the number of sections to be read across the roll and the number of repetitions per section
February 2013, E&OE. – Specifications and details subject to change without notice
q Electronics
Mono CMOS array with 1280 x 960 pixel resolution.
USB2.0 Control via PC
Long term battery pack & external ac power supply
qDimensions
AniCAM: 19 x 10 x 20 cm (W x D x H)
AniCAM Case: 40 x 31 x 15 cm (W x D x H)
qWeight
AniCAM: 2.5 kg / 5.5 lbs
AniCAM with Case: 6 kg / 13.2 lbs
q Environmental conditions
Temperature: 16° - 32° C / 60° - 90° F
Humidity: 40% - 60%, non-condensing
qMinimum PC-requirements
Intel or AMD processor, 2+ GHz, 2+ GB RAM, 1024 x 768, 24-bit Display, USB2.0, 60+ GB hard disk space
qOperating Systems
Windows XP / Windows 7 / Windows 8
qWarranty
12 months return to base. Software upgrades FOC for 12 months.
AniCAM-HVLS 3D Scanning Microscope
v8.x
– 0
2/20
13
High Volume Low Screen
AniCAM HVLS QC readings can automatically be imported into Troika’s Anilox Management System. The AMS database appli-cation enables the printer to fully manage his Anilox inventory by tracking the wear, volume and variance of each roll. Over a period of time the roll history identifies wear on the rolls. This information can lead to reduced setup time and ink adjustment – increasing the availability of the presses.
Visit our WEB site www.troika-systems.com for further informa-tion on the AMS data base!