Model Drilling Capacity Free Speed Spindle Thread Length Weight Air Inlet Thread Avg. Air Consumption MP-2100-ST 3/8" 2200 rpm 3/8"-24 8-1/2" 2 lbs. 1/4" 4 cfm MP-2145-ST 3/8" 4500 rpm 3/8"-24 7-1/2" 2 lbs. 1/4" 4 cfm 30 Angle & General Line Drills See page 42 for drill accessories. Michigan Pneumatic Model MP-31DR-ST 1/4" Air Drill - Reversible Features a forward/reverse switch and a two-speed trigger. Durable composite motor housing and planetary gear system with needle bearings makes for a versatile, lightweight design well-suited for multiple applications. Replacement Jacobs SM1G61-T1 Multi-Craft ® chuck available. Michigan Pneumatic Model MP-500AH-ST 3/8" Angle Drill - Non-Reversible Right angle drill is designed to get into hard to reach areas where pistol types are not accessible. Durable and lightweight. Equipped with Jacobs SM4G61-T1 Multi-Craft ® chuck. Drilling Capacity ............................3/8" Free Speed ........................... 1900 rpm Spindle Thread ........................ 3/8"-24 Rec’d Hose Size ............................1/4" Length ........................................ 7-1/4" Weight ..........................................2 lbs. Air Inlet Thread ..............................1/4" Avg. Air Consumption ................ 4 cfm Michigan Pneumatic Model MP-510AH-ST 3/8" Angle Drill - Reversible 90° right angle drill is designed to get into hard to reach areas. Lightweight, compact, reversible, with variable speed control for most drilling applications. Equipped with Jacobs SM4G61-T1 Multi-Craft ® chuck. Drilling Capacity ............................3/8" Free Speed ........................... 1400 rpm Spindle Thread ........................ 3/8"-24 Rec’d Hose Size ............................1/4" Length ........................................ 8-1/4" Weight ..........................................2 lbs. Air Inlet Thread ..............................1/4" Avg. Air Consumption ................ 4 cfm Michigan Pneumatic Model MP-1403 1/4" Palm Drill - Non-Reversible Ideal for aircraft repair and maintenance work. Small and lightweight design to fit in the palm of the hand. Replacement Jacobs SM1G61-T1 Multi-Craft ® chuck available. 3-3/4" 3-1/2" Michigan Pneumatic 3/8" Straight Drills - Non-Reversible Designed with a three-way planetary gear reduction system for drilling the thickest metal or wood. Housed in a lightweight, rugged aluminum handle. Equipped with Jacobs SM1G61-T1 Multi-Craft ® chuck. Drilling Capacity ............................1/4" Free Speed ........................... 3000 rpm Spindle Thread ........................ 3/8"-24 Rec’d Hose Size ............................1/4" Length ...................................... 6-7/64" Weight .....................................1.76 lbs. Air Inlet Thread ..............................1/4" Avg. Air Consumption ................ 4 cfm Drilling Capacity ............................1/4" Free Speed ........................... 2600 rpm Spindle Thread ........................ 3/8"-24 Rec’d Hose Size ............................1/4" Length .................................... 5-13/16" Weight .....................................1.30 lbs. Air Inlet Thread ..............................1/4" Avg. Air Consumption ................ 4 cfm MP-2100-ST
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ModelDrilling CapacityFree SpeedSpindle ThreadLengthWeightAir Inlet ThreadAvg. Air Consumption
Michigan Pneumatic Model MP-31DR-ST1/4" Air Drill - Reversible
Features a forward/reverse switch and a two-speed trigger. Durable composite motor housing and planetary gear system with needle bearings makes for a versatile, lightweight design well-suited for multiple applications. Replacement Jacobs SM1G61-T1 Multi-Craft® chuck available.
Michigan Pneumatic Model MP-500AH-ST3/8" Angle Drill - Non-Reversible
Right angle drill is designed to get into hard to reach areas where pistol types are not accessible. Durable and lightweight. Equipped with Jacobs SM4G61-T1 Multi-Craft® chuck.
Michigan Pneumatic Model MP-510AH-ST3/8" Angle Drill - Reversible
90° right angle drill is designed to get into hard to reach areas. Lightweight, compact, reversible, with variable speed control for most drilling applications. Equipped with Jacobs SM4G61-T1 Multi-Craft® chuck.
Michigan Pneumatic Model MP-14031/4" Palm Drill - Non-Reversible
Ideal for aircraft repair and maintenance work. Small and lightweight design to fit in the palm of the hand. Replacement Jacobs SM1G61-T1 Multi-Craft® chuck available.
3-3/4"
3-1/2"
Michigan Pneumatic
3/8" Straight Drills - Non-ReversibleDesigned with a three-way planetary gear reduction system for drilling the thickest metal or wood. Housed in a lightweight, rugged aluminum handle. Equipped with Jacobs SM1G61-T1 Multi-Craft® chuck.
Michigan Pneumatic Model MP-31D-ST1/4" Palm Drill - Non-Reversible
Ideal for aircraft repair and maintenance work. Small and lightweight design to fit in the palm of the hand. Replacement Jacobs SM1G61-T1 Multi-Craft® chuck available.
Michigan Pneumatic Model MP-7802-ST3/8" Pistol Drill - Non-Reversible
Lightweight drill designed with a full planetary gearing system for hole sawing and precision drilling. Ideal for production use. Equipped with Jacobs SM4G61-T1 Multi-Craft® chuck.
Michigan Pneumatic Model MP-7803-ST1/2" Pistol Drill - Non-Reversible
Lightweight drill designed with a full planetary gearing system for hole sawing and precision drilling. Ideal for production use. Equipped with Jacobs SM4G61-T1 Multi-Craft® chuck and dead handle.
Michigan Pneumatic Model MP-525-ST3/8" Pistol Drill - Reversible
Lightweight with a controllable teasing trigger. Features a 1/2 HP motor with a super quiet handle exhaust. Applications include screwdriving, honing and reaming. Equipped with Jacobs SM4G61-T1 Multi-Craft® chuck. QC-50 1/4" hex screwdriver adapter available.
Michigan Pneumatic Model MP-527-ST1/2" Pistol Drill - Reversible
Double geared drill handles the toughest chores. Features a teasing action trigger for speed control. Great for screwdriving, tapping and hole sawing. Equipped with Jacobs SM8K61-T1 Multi-Craft® chuck and dead handle. QC-50 1/4" hex screwdriver adapter available.
Michigan Pneumatic Model MP-FD30261360º Drill - Non-Reversible
Smooth, quiet design featuring steel alloy cylinder and rotor. Feather trigger for better control. Head may be adjusted to desired angle. Model MP-FD30161 with straight handle available.
Michigan Pneumatic Model MP-3603360º Drill - Non-Reversible
Lightweight, powerful drill ideal for aircraft and sheet metal repair. Designed for 1/4"-28 threaded bits. Features a rear exhaust and easy maneuverability to minimize operator fatigue. Milled motor housing, steel alloy cylinder and rotor for long tool life.
Features rear exhaust. Milled motor housing, steel alloy cylinder and rotor for long tool life. Available in standard or extended length head with 45º or 90º angle. Precision machined for smooth and quiet operation. Models MP-9039EXT and MP-9039EXT-45 with 9/32"-40 internal spindle thread also available. (Bit not included.)
Produced from Industrial-Grade Steel. Split point penetrates on contact and prevents “walking” of bit. Designed for steel (low and medium carbon), steel alloy and stainless steel. Long and Stubby lengths also available.
• HSS designed for cast iron and steel alloy.
• Cobalt designed for steel (low and medium carbon), steel alloy, and stainless steel alloys.
U.S.A.MADE
IN THE
100º Countersink CuttersFits any micro-stop counter sink or angle drill with a 1/4"-28 spindle. Cutter and integral pilot are precision ground.
Drill StopsHelps eliminate the worry of drilling too deep into tubing, wiring, etc.
Micro-Stop Countersinks
MPT727 - Mini
Designed to be operated in angle drills with a 1/4"-28 spindle. Features a 3/32" shaft travel and a 9/16" cutter capacity. Adjustable in 0.001 increments and rated for use up to 3000 rpm.
MPT827 - Standard
Features 1/4" shank with 9/32" travel. Will accept up to 1/2" diameter cutters with a 1/4"-28 thread. Rated for up to 3000 rpm and is adjustable in 0.001 increments.
MPT927 - Ball Bearing
The ball bearing style micro-stop countersink featuring same specifications as Model MPT827. Rated for up to 10000 rpm.
Michigan Pneumatic Model MP-309Cleco Installation ToolIdeal for aircraft production assembly and mechanics. Quickly install button type and side grip temporary fasteners. Feather trigger and quiet operation round out the features.
Part No. SizeDecimal
Equivalent
DS47-0DS47-1DS47-2DS47-22
#50#40#30#27
0.07000.09800.12850.1440
DS47-3DS47-4DS47-42
#21#20#16
0.15900.16100.1770
DS47-5DS47-6DS47-7DS47-8
#12#101/4"5/16"
0.18900.19350.25000.3150
Pilot Size
Body Diameter
7/16" 3/8" 1/2"
#40#30#27#21#101/4"
328-40328-30328-27328-21328-10328-0.25
328-38-40328-38-30
-328-38-21328-38-10
-
328-12-40328-12-30
-328-12-21328-12-10
- DS47-2
DS47-1
Shown with Cleco fastener (not included.)
35
Nippon Pneumatic Model NRD-6SAT1/4" Straight Drill - Non-Reversible
Compact, lightweight drill fits the palm of the hand. Features a lever throttle for safe, easy start up. Ideal for hard to reach drilling areas. Planetary gearing provides sufficient torque for light reaming applications. Equipped with Jacobs 1B-3/8 medium-duty chuck.
Nippon Pneumatic Model NRD-6PBT1/4" Heavy-Duty Drill - Non-Reversible
Ideal for aircraft and sheet metal repair. Lightweight industrial drill with a teasing throttle for starting holes. Exhausts through the handle to avoid blowing debris. Equipped with Jacobs 1B-3/8 medium-duty chuck.
Nippon Pneumatic Model NRD-10PT3/8" Heavy-Duty Drill - Non-Reversible
Production drill designed for use on assembly and maintenance applications. Bronze end plates ensure long life and durability. Power-to-weight ratio exceeds similar models. Equipped with Jacobs 22BA-3/8 industrial-duty chuck.
Nippon Pneumatic Model NRD-12PAT1/2" Heavy-Duty Drill - Non-Reversible
Heavy-duty drill built to take the punishment of continuous production use. Rugged design assures the best possible drilling performance. Smoothness allows for accurate drilling, reaming and tapping. Adjustable handle included. Equipped with Jacobs 33BA-1/2 heavy-duty chuck.
Nippon Pneumatic Model NRT-8PReversible TapperIndustrial model. Double trigger tapper with two-step quick reverse throttle makes tapping work speedy, leaving a fine finish. Equipped with NPK Model 6551010080 medium-duty chuck. Model NRT-8P-JTC with Jacobs Tap Chuck available.6570000080 Chuck Key
Length ...................................... 7-1/16"Weight .......................................2.6 lbs.Air Inlet Thread ..............................1/4"Avg. Air Consumption ........... 19.4 cfmTap not included
36
Step 2. Select Spindle Option
Step 4. Select Rear Feed Option
Step 1. Select Motor No.
Step 3. Select Throttle Option
See pages 38-39 & 42 for drill accessories.
NRD-19RWSCT
Motor No. Free Speed
Capacity
DrillingReaming/ Tapping
NRD-14RNRD-14RU‡ 1100 rpm 9/16" 3/8"
NRD-16RNRD-16RU‡ 900 rpm 5/8" 1/2"
NRD-19RNRD-19RU‡ 750 rpm 3/4" 5/8"
NRD-22RNRD-22RU‡ 600 rpm 7/8" 3/4"
‡ Underwater Motor
5/8"
Cap
.
#2 M
orse
Tape
r
Nippon Pneumatic
Heavy-Duty Reversible DrillsIdeal for production work, boasting smooth operation for accurate drilling, reaming, tapping and woodboring. Possesses the lugging power to maintain speed when under load. Powerful and efficient for use in railroad shops, shipyards, tool rooms and all types of construction work. Features ball bearing support for long life. Includes dead handle. Equipped with 1/2" Air Inlet Thread requiring Avg. Air Consumption of 39 cfm. Recommended hose size of 1/2".
• Built-In Lubricator• 2 Horse Power Motor, 2-3/8" Feed Length
W
3/4"
Cap
.
5C 6C 7C
Option Code Ordering Exceptions
#1 Morse Taper NRD14 Series only (Standard: do not specify)
2M NRD-16 thru NRD-22 (Standard: do not specify)
5C NRD-14 Series thru NRD-22 Series
6C or 7C NRD-19 and NRD-22 Series only
W Includes Breast Plate (Step 4)
#1 M
orse
Tape
r
Woo
dbor
ing
Chu
ck
SCT
B
Option Code Ordering Exceptions
Feed Screw Standard: do not specify
B Included with Option W (Step 2)
Feed
Scr
ewSafety Lever
Throttle
Self-Closing
Roll Throttle
Breast Plate
NRD-19RStep 1
SCT Step 3
++
MOTOR NO.SPINDLE FEED
OPTIONTHROTTLE
OPTION
W Step 2
**Step 4
NRD-19RWSCT+ =
REAR FEED OPTION MODEL NO. FOR ORDERING
Example for Ordering
**Rear Feed Option omitted per Option Code B exception
Heavy-Duty Drills & Wood Borers
1/2"
Cap
.
LW
2M
37See pages 38-39 & 42 for drill accessories.
Step 2. Select Spindle Option
Step 4. Select Rear Feed Option
Step 1. Select Motor No.
Step 3. Select Throttle Option
NRD-23RSCT
Motor No. Free Speed
Capacity
DrillingReaming/ Tapping
NRD-23RNRD-23RU‡ 700 rpm 15/16" 3/4"
NRD-25RNRD-25RU‡ 570 rpm 1" 7/8"
NRD-28RNRD-28RU‡ 450 rpm 1-1/8" 7/8"
NRD-32LRNRD-32LRU‡ 380 rpm 1-1/4" 1"
‡ Underwater Motor
Nippon Pneumatic
Heavy-Duty Reversible DrillsHeavy-duty reversible drills are preferred for production work as they have absolute smoothness of operation for accurate drilling, reaming, tapping and nutrunning. They possess the lugging power to keep their speed when under a load. Their power and efficiency makes them ideal tools for use in railroad shops, shipyards, tool rooms and all types of construction work. Features ball bearing support for long life. Includes dead handle. Equipped with 3/8" (Safety Lever Throttle) or 1/2" (Self-Closing Roll Throttle) Air Inlet Thread requiring Avg. Air Consumption of 50 cfm. Recommended hose size of 1/2".
® ArborsMorse taper to Jacobs® taper arbors can be used to adapt any Morse taper drill to accept Jacobs® chucks. These adapters improve drill operation and make drill bit changes quicker.
Morse
Taper
Jacobs
Taper
Other Manufacturer AccessoriesR33H-79 Breast PlateFits Ingersoll-Rand 33 Series
* Jacobs® Taper† Rubber-Flex® Collets are not included. Must be ordered separately.
Michigan Pneumatic Model MP-6-1015-0075Nutrunner - 3/4" Square Drive
Lightweight nutrunner featuring high stall torque and reversible drive is ideal for turning valves, tightening, tapping, reaming, pipe beveling or expanding. Compact angle head allows access to confined spaces. Worm gear drive provides high torque and reliability. Equipped with 3/4" square drive.363394910 1/2" Square Drive Spindle
Michigan Pneumatic Model MP-9072RTRight Angle Rolling MotorTorque-controlled rolling motor designed for the boiler tube industry. Unique head design features enclosed bearing design for long tool life. Engineered to precisely expand tubes in steam drums, fire tubes, and related boiler equipment. Features a roll throttle. Includes dead handle. Tube OD capacity: 1-1/2" to 4".
See pages 38 & 42 for additional drill accessories.
® Tap ChucksFull range of tap chucks for tapping machines and portable tappers.
• Designed for use with Rubber-Flex® collets• Positive-drive chuck jaws for superior performance• Simple quarter turn of chuck screw to disengage back jaws
® Rubber-Flex® ColletsOutperform conventional split-steel collets in gripping power, accuracy and durability.
• Durable one-piece construction• Precision ground steel jaw inserts assuring maximum grip• Seals collets and machine spindles to protect from abrasive particles
B
C A D
40
Heavy-Duty Drills & Wood BorersMichigan Pneumatic Model MP-222Extra Heavy-Duty Drill/Wood BorerThe newest edition to the MPT line of industrial air tools. Ideal for woodboring in marine timbers and railroad repair work. Features include ball bearing support for long life and efficient operation, a graduated roll throttle for speed control, and durable spur gearing. Includes breast plate, dead handle and a built-in lubricator standard. Equipped with 1/2" Air Inlet Thread requiring Average Air Consumption of 50 cfm. Recommended hose size of 1/2"
Michigan Pneumatic Model MP-33WWood Borer - Reversible
Designed for heavy-duty woodworking. Preferred for wood boring as the operator can easily control the power and speed by the throttle. Powerful, lightweight and easy to handle. Ideal for all types of wood boring, construction work, railroads, shipyards and wharf and pier construction. Uses Ingersoll-Rand 33W wood borer parts.
Michigan Pneumatic Model MP-L-257Corner Drill - Non-Reversible
Compact, rugged, powerful design for heavy-duty use in cramped areas. Features positive starting control and sensitive speed variation. Will handle various drilling, reaming and tapping applications. Ideal for assembly plants, refineries and railroad shops. Other models available with #4 M.T. Uses Thor L-257 corner drill parts. Includes ratchet wrench.
Michigan Pneumatic Model MP-323-3Corner Drill - Non-Reversible
Designed for heavy-duty use in cramped areas. Features extra heavy-duty grease packed gearing, hardened ground motor liners, a teasing throttle, feed screws and a governor controlled motor. Includes ratchet wrench.
Michigan Pneumatic Model MP-30Corner Drill - Non-Reversible
Strong, powerful close quarters drill built to withstand heavy-duty drilling, reaming and tapping where space is limited. Particularly useful in machine shops, power plants and railroad shops. Model MP-40 also available with #4 M.T. Uses Ingersoll-Rand 30 corner drill parts. Includes ratchet wrench.
Michigan Pneumatic Model MP-2-1801-0030Corner Drill - Non-Reversible
Applications include heavy-duty drilling, reaming and tapping for railroad cars, refineries, shipyards, structural steel fabrication and wood product industries. Features small side-to-side distance for working in tight spaces, self-closing roll throttle, feed screw and built-in motor oiler.
Height of Spindle ...........................7.5"Length ...................................... 22-1/2"Weight ........................................25 lbs.Spindle Offset ................................1.4"
Michigan Pneumatic Model MP-2-2104-0030Corner Drill - Reversible
Applications include heavy-duty drilling, reaming and tapping for railroad cars, refineries, shipyards, structural steel fabrication and wood product industries. Features small side-to-side distance for working in tight spaces, self-closing roll throttle, feed screw and built-in motor oiler.
Height of Spindle ............................10"Length ..........................................23.8"Weight ........................................37 lbs.Spindle Offset ................................1.6"
Heavy-Duty Corner Drills
See pages 38-39 & 42 for drill accessories.
42
® Ball Bearing Super-Duty ChucksSuper ball bearing chucks are the world’s most accurate chucks designed for extra heavy-duty drilling. Ideal for close tolerance production drilling on precision equipment.
Thread Mounted Light-Duty Industrial ModelJacobs Model
MPTModel
Capacity(min. - max.)
Threaded Mount
UsesKey
22BA-3/822BA-1/2
22BA-0.37522BA-0.500 0.063 - 0.375" 3/8"-24
1/2"-20 KK
24BA-3/826BA-1/2
24BA-0.37526BA-0.500 0.063 - 0.500" 3/8"-24
1/2"-20 KK
JacobsModel
MPTModel
Capacity(min. - max.)
ThreadedMount
Sleeve Type
3145131708-3/83196731993
3145131708-ASM3196731993
0.032 - 0.375" 3/8"-24 2 pc
3170832000
3170832000
0.032 - 0.375"2JT
1/2"-202 pc1 pc
31731-3/83179132161-3/832540
31731-ASM3179132161-ASM32540
0.062 - 0.500" 3/8"-24
1 pc2 pc2 pc2 pc
314033173132161
314033173132161
0.062 - 0.500" 1/2"-202 pc1 pc2 pc
ModelNo.
ShankSize
Threaded Mount
QC-50QC-51
1/4" hex7/16" hex
3/8"-24
QC-50 QC-51
See pages 38-39 for additional drill accessories. Stainless steel chucks available in some sizes.
43
Magnetic Drill & CuttersMagnetic DrillThe MDM-40 features a compact 13" height for drilling in tight spaces and automatic lubrication. A 4-speed gearbox and automatic lubrication are standard on the ECO-80AK. Other magnetic drills are available in either air or electric versions. See below for annular cutters.
Model
Cutter CapacityTwist Drill CapacityNo Load SpeedArbor BoreStrokeMotor PowerMagnetic Force (1" plate)Magnet Base SizeDimensionsWeight
MDM-40
1-1/2"-440 rpm3/4"4-3/8"9.5 amp/110V2640 lbs.6-1/2" L x 3-1/4" W13" H x 9-1/2" L x 7" W24 lbs.
ECO-80AK
3-3/16"1-1/4"100/175/245/385 rpm3/4"10"15 amp/110V7040 lbs.9" L x 4-3/8" W19-1/2" H x 13-3/8" L x 7-1/2"57 lbs.
Model MDM-40 Model ECO-80AK
Annular CuttersArmor-Plated Unibroach™ Cutters are for use with Hougen, Jancy and other magnetic drilling machines with 3/4" arbor collets. More cutting teeth reduces the individual tooth loading, which extends tool life before resharpening and makes for easier, more efficient cutting of tough materials.