Acreditación/ Accreditation nº 206/LC10.151 Anexo Técnico Rev./ Technical Annex Ed.8 Fecha / Date 24/02/2016 Hoja/ Page 1 de 11 The present technical annex is subject to possible modifications. The validity status of the accreditation can be confirmed in www.enac.es ANEXO TÉCNICO ACREDITACIÓN Nº 206/LC10.151 SCHEDULE OF ACCREDITATION Entidad/ Entity: MACCORMACK CALIBRACION, S.L. Dirección/Address: C/ Estanislao Gómez, 23; 28042 Madrid (MADRID) Norma de referencia/Standars: UNE-EN ISO/IEC 17025: 2005 Calibraciones en las siguientes áreas/Calibrations in the following areas: Concentración de gases (Gas Concentration) ........................................................................................... 1 Dimensional (Dimensional) ................................................................................................................... 2 Electricidad CC y Baja Frecuencia (DC and Low Frequency Electricity) ....................................................... 3 Fuerza y Par (Force and Torque) ............................................................................................................ 8 Masa (Mass)....................................................................................................................................... 9 Óptica (Optics) .................................................................................................................................... 9 Presión y Vacío (Pressure and Vacuum) ............................................................................................... 10 Concentración de gases (Gas Concentration) Categoría 0 (Calibraciones en el laboratorio permanente) Category 0 (Permanent laboratory calibrations) CAMPO DE MEDIDA Range CMC(*) INSTRUMENTOS A CALIBRAR Instruments MONÓXIDO DE CARBONO [CO] Carbon monoxide concentration [CO] 0,17 ≤ C ≤ 5,8·10 -2 mol/mol 0,019·C + 0,0033·10 -2 mol/mol Analizadores de gases de escape DIÓXIDO DE CARBONO [CO 2 ] Carbon dioxide concentration [CO 2 ] 5,1 ≤ C ≤ 17,3·10 -2 mol/mol 0,019·C + 0,045·10 -2 mol/mol Analizadores de gases de escape OXÍGENO [O 2 ] Oxygen [O 2 ] 0,17 ≤ C ≤ 24,0·10 -2 mol/mol 0.018,C + 0,021·10 -2 mol/mol Analizadores de gases de escape Concentración de Propano expresado como equivalente n‐hexano C 6 H 14 Hydrocarbons concentration (expressed as C 6 H 14 ) 42,5·10 -6 ≤ C ≤ 1150·10 -6 mol/mol 0,019·C + 1,78·10 -6 mol/mol Analizadores de gases de escape Realización normalizada aire‐combustible (ג) Lambda )ג) 1 ± 0,03 0,001 Analizadores de gases de escape Código Validación Electrónica: Hdc9NcUeWRi65Sa98h El presente anexo técnico está sujeto a posibles modificaciones. La vigencia de la acreditación y del presente anexo técnico puede confirmarse en http://www.enac.es/web/enac/validacion-electronica o haciendo clic aquí
11
Embed
ANEXO TÉCNICO ACREDITACIÓN Nº 206/LC10.151 …...Acreditación/ Accreditation nº 206/LC10.151 Anexo Técnico Rev./ Technical Annex Ed.8 Fecha / Date 24/02/2016 Hoja/ Page 2 de
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
The present technical annex is subject to possible modifications. The validity status of the accreditation can be confirmed in www.enac.es
ANEXO TÉCNICO ACREDITACIÓN Nº 206/LC10.151
SCHEDULE OF ACCREDITATION
Entidad/ Entity: MACCORMACK CALIBRACION, S.L. Dirección/Address: C/ Estanislao Gómez, 23; 28042 Madrid (MADRID) Norma de referencia/Standars: UNE-EN ISO/IEC 17025: 2005 Calibraciones en las siguientes áreas/Calibrations in the following areas:
Concentración de gases (Gas Concentration) ........................................................................................... 1
The present technical annex is subject to possible modifications. The validity status of the accreditation can be confirmed in www.enac.es
CAMPO DE MEDIDA Range
CMC(*) INSTRUMENTOS A CALIBRAR Instruments
RESISTENCIA C.C. D.C. Resistance
R = 1 Ω R = 1,9 Ω R = 10 Ω R = 19 Ω R = 100 Ω R = 190 Ω R = 1 kΩ R = 1,9 kΩ R = 10 kΩ R = 19 kΩ R = 100 kΩ R = 190 kΩ R = 1 MΩ R = 1,9 MΩ R = 10 MΩ R = 19 MΩ R = 100 MΩ R = 190 MΩ
7,8 · 10-3
· R 3,9 · 10
-3 · R
1,2 · 10-3
· R 7,8 · 10
-4 · R
3,2 · 10-4
· R 3,1 · 10
-4 · R
2,0 · 10-4
· R 2,0 · 10
-4 · R
2,0 · 10-4
· R 2,3 · 10
-4 · R
3,0 · 10-4
· R 3,3 · 10
-4 · R
3,2 · 10-4
· R 3,1 · 10
-4 · R
7,8 · 10-4
· R 1,3 · 10
-3 · R
3,9 · 10-3
· R 7,8 · 10
-3 · R
Multímetros Ohmetros
Categoría I (Calibraciones “in situ”) Category I (“on site” calibrations)
CAMPO DE MEDIDA Range
CMC(*) INSTRUMENTOS A CALIBRAR Instruments
TENSIÓN C.C. D.C. Voltage
1 mV ≤ U < 104 mV 0,104 V ≤ U < 1,04 V 1,04 V ≤ U < 10,4 V 10,4 V ≤U < 104 V 104 V ≤ U ≤ 1020 V
5,4 · 10
-4 · U + 32 µV
4,5 · 10-4 · U + 79 µV 4,6 · 10
-4 · U + 0,77 mV
4,9 · 10-4
· U + 7,7 mV 4,8 · 10
-4 · U + 77 mV
Multímetros Voltímetros
Código Validación Electrónica: Hdc9NcUeWRi65Sa98h
El presente anexo técnico está sujeto a posibles modificaciones. La vigencia de la acreditación y del presente anexo técnico puede confirmarse en
http://www.enac.es/web/enac/validacion-electronica o haciendo clic aquí
100 kPa ≤ P ≤ 200 kPa 200 kPa < P < 400 kPa 400 kPa < P < 1 MPa 1 MPa < P < 2 MPa 2 MPa < P < 6 Mpa 6 MPa < P < 10MPa
10 MPa < P < 20MPa 20 MPa < P < 60 MPa
0,50 kPa 1 kPa 2 kPa
4,2 kPa 16 kPa 20 kPa 35 kPa
110 kPa
Manómetros y presostatos
(*) CMC: Capacidad de Medida y Calibración es la menor incertidumbre de medida que el laboratorio puede
proporcionar a sus clientes, expresada como incertidumbre expandida para un nivel de confianza de aproximadamente el 95%.
(*) CMC: Calibration and Measurement Capability is the smallest uncertainty of measurement the laboratory can provide to its customers, expressed as the expanded uncertainty having a coverage probability of approximately 95%.
Esta revision corrige las erratas detectadas en el título del Anexo de la revision 7 de fecha 29/01/2016
Código Validación Electrónica: Hdc9NcUeWRi65Sa98h
El presente anexo técnico está sujeto a posibles modificaciones. La vigencia de la acreditación y del presente anexo técnico puede confirmarse en
http://www.enac.es/web/enac/validacion-electronica o haciendo clic aquí