AND RECONDITIONING CHECK LIST - agcocorp.com · check list: combine runs the gauntlet of our extensive inspection, certification and reconditioning process, you can be confident you’re

COMBINESReady For More℠

• Control• Level

• Mounting hardware• Separator grates

• Attaching hardware

CONCAVE

• Cage• Rasp bars

• Accelerator roll• Rotor tines

• Rotor drive gear box shift linkage• Forward and reverse cylinder bars

• Rotor helical guide vanes

ROTOR

• Header lift cylinder safety stop• Feed chain and sprockets• Header latches

• Header/feeder reverser• Feederhouse bearings• Frame

• Pivot area• Lift cylinders and hydraulic lines• Rock trap

FEEDERHOUSE

• Engine block, mounts, cylinder head, valve cover, oil pan and gaskets

• Air intake, filter, tubes, hoses, and clamps

• Fuel high pressure pump

• Crankshaft, damper, and pulleys• Transmission and differential• Hydrostatic pump and motors• DCA Level• Belts

• Exhaust system• Parking and service brakes• Battery• Air conditioner• Drive belts

• Pulleys• Chains• Sprockets

POWERTRAIN AND SYSTEMS

• Cleaning system bearings • Shaker shoe • Pitman arm alignment • Sealing strips

SHAKER SHOE FRAME AND DRIVE

• Adjusting lever and door latch• Switches

• Sieves• Sieve pan seals

• Grain loss sensors• Cascade pan

• Comb assembly• Grain pan

CHAFFER AND SIEVE

• Bearings • Elevator chains and sprockets • Elevator housing and paddles

TAILINGS RETURN SYSTEM

• Elevator chains and sprockets• Elevator housing and paddles• Elevator chain adjustment

• Grain auger• Cleaning fan• Bearings

• Variable speed pulley• Grain tank• Grain tank extensions

• Fill auger flighting and housing• Unloader augers flighting and

housing• Unloader drive

CLEAN GRAIN SYSTEM

200+ POINT INSPECTION AND RECONDITIONINGCHECK LIST:

Our combines are already built for the long haul. And after each pre-owned combine runs the gauntlet of our extensive inspection, certification and reconditioning process, you can be confident you’re making a smart investment.

COMBINES

• Frame• Paint

• Glass and mirrors• Decals

• Safety shield• Tires and hardware

• Toe setting• Toolbox

EXTERIOR

• Main control valve • Smartrac LTM control valve • Lines and hoses

HYDRAULICS

• Paddles• Drive gears

• Curtains• Concave and stationary knives

• Housing

STRAW SPREADER

• Panels• Doors• Headliners

• Upholstery• Seat, seatbelts, and armrests• Dashboard and monitor

• EIP functions• Keys and manuals• Fuel level

CAB/OPERATOR PLATFORM

• Road test• Operator controls• Rear wheel angle• Steering• Gauges• Clutch, pedal, and control• Transmission controls• Hydrostatic driveline

• Rear axles• Axles• Neutral start switches• Parklock• Exhaust• Fan• Engine speed and temperatures• Engine oil pressures

• Fuel pump pressures• Engine coolant temperature• Hydraulic oil temperature• Battery voltage• Air conditioner• Load test battery• Windshield wipers• Lights

• Sound system• Thresher PTO clutch• Header electro-magnetic clutch• Unloading auger• Feeder house• Accumulator PSI• Calibrate hoppers, sieves,

and concaves

OPERATIONAL AND OTHER TESTS

• Engine oil• Transmission oil

• Engine coolant• Hydraulic oil

• Freeze protection

FLUID TESTS

• Change final drive oil• Change transmission oil• Change hydraulic oil• Change engine oil• Change fuel filters

• Change hydraulic oil filter• Change brake fluid• Change rotor gearbox oil• Change SCR filters• Change engine air filter

• Change cab air filters• Clean in-line fuel strainer/fuel

sedimenter• Clean oil cooler, condenser, radiator,

charge air cooler and fuel cooler

• Clean batteries• Change radiator coolant• Detail machine• Check service interval• Check repair history

SERVICE AND MAINTENANCE

Every Certified Pre-Owned AGCO combine is backed by a comprehensive 1-year protection plan. A deductible of $250 will be applied per incident.

AGCO Protection is for a minimum of 12 months or 500 hours from (i) the date of purchase (if out of base warranty on date of purchase) or (ii) the date the base warranty ends (if under base warranty on date of purchase), whichever occurs first. Deductible of $250 will be applied per incident. Coverage is limited to powertrain, hydraulic, electrical, structural, feeder, lateral tilt, processor, chopper/spreader, separator, grain bin and elevator components. Restrictions apply. The CPO program and AGCO Protection extended coverage plans do not cover headers. Please see a participating dealer for restrictions and a full listing of the components covered by AGCO Protection.

©2015 AGCO Corporation. AGCO is a registered trademark of AGCO. Challenger is a registered trademark of Caterpillar Inc. and is used under license by AGCO. Massey Ferguson is a worldwide brand of AGCO. Gleaner is a registered trademark of AGCO. Ready For More is a service mark of AGCO. All rights reserved. Specifications and depictions shown herein are subject to change without notice and may differ from actual equipment. Equipment produced by other manufacturers shown herein is for illustration purposes only and is not intended to be an endorsement of any particular equipment or its suitability. AGCO Corporation, 4205 River Green Parkway, Duluth, GA 30096. (877) 525-4384. CPO15B004CR (02) 1 PD

www.agcocorp.com/CPO