K.M.L. TECHNOLOGY CO., LTD www.kumwell.com www.facebook.com/kumwellofficial E-mail : [email protected]C-Clamp AND Copper Lugs CONNECTOR Perfect Connection High quality, C-Clamp and Copper Lugs up to UL standard, use with the Hydraulic Climping Tool, a compression devices and interchangable Die set which both are specially designed and tested for high efficiency connection for the safest grounding system Tested certification IEC 62561-1 : Lightning Protection System compenent (LPSC) For Connection Component Wide selections from CCC6-6 to CCC300-300 C-Clamp Cross Section Tested certification : UL 467 Copper Lugs 1. Copper Lugs Low Voltages (no more than 600 V) from KOL 10-6 to KOL 500-20 2. Copper Lugs High Voltages (up to 35 kV) Wide selections : 1 hole, 2 holes, 1 hole Barrel 90 ํ, 2 hole Barrel 90 ํ, and 4 holes ; the size of 8 AWG to 2000 MCM Tested certification : UL 486 Hydraulic Crimping Tool Round DIE HCT- S1 Hexagon DIE Specification Crimping force Stroke Length Weight 120 kN 42 mm. 550 mm. 7 kg. 540 kN 28 mm. 380 mm. 43.4 kg. Type : HCT-M1 Conductor Size Die Size Die Size Conductor Size Type : HCT-P1 Application DIE Selection 60 kN 17 mm. 460 mm. 3.3 kg. Die Size Conductor Size Type : HCT-S1 C-Clamp Copper Lugs 10 - 185 mm 2 10 - 400 mm 2 95 - 300 mm 2 400 - 1000 mm 2 10 - 70 mm 2 10 - 300 mm 2 Round DIE for C-Clamp 95, 185, 300 10, 25, 35, 70, 95, 185 10, 25, 35, 70 Hexagon DIE for Copper Lugs 400, 500, 630, 800, 1000 10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400 10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 HCT- M1 HCT- P1 • For C-Clamp CCC6-6 to CCC70-70 • For Copper Lugs Cable Size 10-300 mm 2 • For C-Clamp CCC6-6 to CCC185-95 • For Copper Lugs Cable Size 10-400 mm 2 • For C-Clamp CCC95-35 to CCC300-300 • For Copper Lugs Cable Size 400-1000 mm 2
2
Embed
AND Copper Lugs CONNECTOR. TECHNOLOGY CO., LTD E-mail : [email protected] C-Clamp AND Copper Lugs CONNECTOR Perfect Connection High quality, C-Clamp and Copper Lugs up to UL ...
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
High quality, C-Clamp and Copper Lugs up to UL standard, use with the Hydraulic Climping Tool, a compression devices and interchangable Die set which both are specially designed and tested for high efficiency connection for the safest grounding system
Tested certificationIEC 62561-1 : Lightning Protection System compenent (LPSC) For Connection Component
Wide selections from CCC6-6 to CCC300-300
C-Clamp
Cross Section
Tested certification : UL 467
Copper Lugs
1. Copper Lugs Low Voltages (no more than 600 V) from KOL 10-6to KOL 500-202. Copper Lugs High Voltages (up to 35 kV) Wide selections : 1 hole, 2 holes, 1 hole Barrel 90 ํ, 2 hole Barrel 90 ํ, and 4 holes ; the size of 8 AWG to 2000 MCM
Tested certification : UL 486
Hydraulic Crimping Tool
Round DIE
HCT- S1
Hexagon DIE
SpecificationCrimping forceStrokeLength
Weight
120 kN
42 mm.
550 mm.
7 kg.
540 kN
28 mm.
380 mm.
43.4 kg.
Type : HCT-M1
Conductor Size
Die Size Die Size
Conductor Size
Type : HCT-P1
Application
DIE Selection
60 kN
17 mm.
460 mm.
3.3 kg.
Die Size
Conductor Size
Type : HCT-S1
C-Clamp Copper Lugs
10 - 185 mm2
10 - 400 mm2
95 - 300 mm2
400 - 1000 mm2
10 - 70 mm2
10 - 300 mm2
Round DIE for C-Clamp 95, 185, 30010, 25, 35, 70, 95, 18510, 25, 35, 70