Older versions of Mastercam available. Please contact your Mastercam Reseller or CamInstructor for more details. CamInstructor 330 Chandos Court Kitchener, ON N2A 3C2 • p 1-877-873-6867 • f 1-866-741-8421 • [email protected] • www.caminstructor.com For a FREE Desk Copy of any of our Training Products just go to: www.caminstructor.com and click on Teacherʼs Corner OR email [email protected] OR Contact your Mastercam Reseller OR call 877-873-6867 ext 703 CNC Programming Student Workbook for Milling • 10 Lessons covering, Absolute and Incremental Programming, Linear Interpolation, Drilling with Canned Cycles, Circular Interpolation and Cutter Compensation • 14 Exercises and 5 Advanced Exercises • 55 Instructional Videos that teach the basics of CNC Programming for Milling Machines • Free copy of G-Code Simulation Software • Space so students can make notes and complete their exercises all in one handy booklet Price: $30.00 each ISBN: 978-1-897466-84-1 CNC Programming Workbooks Suitable for courses covering manual G-Code programming for both Mill and Lathe CNC Programming Student Workbook for Lathe • 8 Lessons covering, Absolute and Incremental Programming, Linear Interpolation, Drilling, Turning – Canned Cycles, Circular Interpolation, Tool Nose Compensation and Grooving/Parting Off • 18 Exercises • 34 Instructional Videos that teach the basics of CNC Programming for Lathes • Free copy of G-Code Simulation Software • Space so students can make notes and complete their exercises all in one handy booklet Price: $30.00 each ISBN: 978-1-897466-83-4 CNC Programming Student Workbook for Mill and Lathe • 18 Lessons combined from the Milling Workbook and Lathe Workbook as listed above • 32 Exercises • 89 Instructional Videos combined from the Mill Workbook and Lathe Workbook as listed above • Free copy of G-Code Simulation Software • Space so students can make notes and complete their exercises all in one handy booklet Price: $55.00 each ISBN: 978-1-897466-88-9 CNC Programming Teacher Kit • Answers and solutions to all of the exercises in the CNC Programming Workbooks – Mill & Lathe • G-Code Simulation Software • Instructional videos that teach the basics of CNC Programming for CNC Mills and Lathes Price: $275.00 each. Free with the purchase of 10 or more Workbooks or Courseware ISBN: 978-1-897466-86-5
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Older versions of Mastercam available. Please contact your Mastercam Reseller or CamInstructor for more details.
CamInstructor330 Chandos Court Kitchener, ON N2A 3C2 • p 1-877-873-6867 • f 1-866-741-8421 • [email protected] • www.caminstructor.com
For a FREE Desk Copy of any of our Training Products just go to:
www.caminstructor.com
and click on Teacherʼs Corner OR email [email protected]
OR Contact your Mastercam Reseller OR call 877-873-6867 ext 703
CNC Programming Student Workbook for Milling• 10 Lessons covering, Absolute and Incremental Programming, Linear Interpolation,
Drilling with Canned Cycles, Circular Interpolation and Cutter Compensation• 14 Exercises and 5 Advanced Exercises• 55 Instructional Videos that teach the basics of CNC Programming for Milling Machines• Free copy of G-Code Simulation Software• Space so students can make notes and complete their exercises all in one handy
bookletPrice: $30.00 each
ISBN: 978-1-897466-84-1
CNC Programming WorkbooksSuitable for courses covering manual G-Code programming for both Mill and Lathe
CNC Programming Student Workbook for Lathe• 8 Lessons covering, Absolute and Incremental Programming, Linear Interpolation,
Drilling, Turning – Canned Cycles, Circular Interpolation, Tool Nose Compensation andGrooving/Parting Off• 18 Exercises • 34 Instructional Videos that teach the basics of CNC Programming for Lathes• Free copy of G-Code Simulation Software• Space so students can make notes and complete their exercises all in one handy
bookletPrice: $30.00 each
ISBN: 978-1-897466-83-4
CNC Programming Student Workbook for Mill and Lathe• 18 Lessons combined from the Milling Workbook and Lathe Workbook as listed above• 32 Exercises• 89 Instructional Videos combined from the Mill Workbook and Lathe Workbook as listed
above • Free copy of G-Code Simulation Software• Space so students can make notes and complete their exercises all in one handy
bookletPrice: $55.00 each
ISBN: 978-1-897466-88-9
CNC Programming Teacher Kit• Answers and solutions to all of the exercises in the CNC Programming Workbooks –
Mill & Lathe• G-Code Simulation Software• Instructional videos that teach the basics of CNC Programming for CNC Mills
and LathesPrice: $275.00 each. Free with the purchase of 10 or more Workbooks or
Courseware
ISBN: 978-1-897466-86-5
Related Documents
