Cleveland State University Cleveland State University EngagedScholarship@CSU EngagedScholarship@CSU Mechanical Engineering Faculty Publications Mechanical Engineering Department 12-2008 An Object-Oriented Approach for Modeling and Simulation of An Object-Oriented Approach for Modeling and Simulation of Crack Growth in Cyclically Loaded Structures Crack Growth in Cyclically Loaded Structures D. Cojocaru University of Delaware Anette M. Karlsson Cleveland State University, [email protected] Follow this and additional works at: https://engagedscholarship.csuohio.edu/enme_facpub Part of the Computer-Aided Engineering and Design Commons How does access to this work benefit you? Let us know! How does access to this work benefit you? Let us know! Publisher's Statement NOTICE: this is the author’s version of a work that was accepted for publication in Advances in Engineering Software. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Advances in Engineering Software, 39, 12, (12-01-2008); 10.1016/j.advengsoft.2008.01.009 Original Citation Original Citation Cojocaru, D., and Karlsson, A. M., 2008, "An Object-Oriented Approach for Modeling and Simulation of Crack Growth in Cyclically Loaded Structures," Advances in Engineering Software, 39(12) pp. 995-1009. This Article is brought to you for free and open access by the Mechanical Engineering Department at EngagedScholarship@CSU. It has been accepted for inclusion in Mechanical Engineering Faculty Publications by an authorized administrator of EngagedScholarship@CSU. For more information, please contact [email protected].