This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
One Product Checks All Your NeedsSimplify Your Specs and BidsSaves Money & TimeEliminate SKU’s, Free Shelf Space Reduce Overall Carrying CostsCompetitively Priced for ValueSteel ConstructionMade in the USA
Available in Rain Tight and Galvanized Plating
Page 1
Since 1946
Machined Alloy Steel [Ours] Cast Malleable Iron [Theirs] Zinc Die Cast (Zamack # 3 -7)[Theirs]
ASTM Physical Test Result ASTM Physical Test Result ASTM Physical Test Result
* Creep (sometimes called cold �ow) is the tendency of a solid material to move slowly or deform permanently under the in�uence of mechanical stresses. It can occur as a result of long-term exposure to high levels of stress that are still below the yield strength of the material.
AMERICAN FITTINGS’ products are manufactured from US manufactured hot rolled alloy steel bar stock. All materials are received from the mill with certi�ed ASTM mill test reports . This ensures the integrity of raw material forevery �tting we manufacture.
AMERICAN INTEGRITY OF MATERIALS
Why are you using inferior die cast or malleable iron �ttings for speci�cation grade industrial projects? Neither of these materials o�ers the uniformity of threads and compression, that our alloy steel provides. Our consistent centerlines provides precise alignment with enclosures and conduit. Environmental integrity and ease of installation are guaranteed with the manufacturing and machining processes we employ. NO �tting found worldwide can meet the quality and integrity of AMFICO.
AMERICAN CONSISTENCY OF PRODUCT
AMERICAN STRENGTH IS UNEQUALED with 1/3 the Weight of Malleable and Twice the StrengthThere is no way to get around the numbers, twice the strength of MI at a fraction of the weight.Alloy steel will outperform and outlast both die cast and malleable iron products.Alloy steel is not dependent on carbon for strength, and is naturally stronger with greater bene�ts in harsh conditions. Additive elements found in alloy steel make it NATURALLY corrosion resistant.
REDUCE YOUR INVENTORY
Precision Cutting and Machining of Every Part
Our Unique Full Hex Design Provides Greater Torque with Ease of Installation
RETHINK AMERICAN Thought of as a �ttings source for Buy America jobs, you should realize our full range of industrial �ttings go WELL BEYOND government work. Infrastructure to industrial being much easier to install and always surpassing application requirements,our �ttings will outperform ALL others, as will our commitment to customer service.
Our Raw Material Fully Documented
US MadeAlloy Steel Bar Stock
Fittings Certi�ed to MIL-STD 810 Sinusoidal Vibration Testing
RainTIGHT Fittings FeatureAMFICO ProprietaryInternal Environmental Sealing Ring
Buy With Con�dence:RT Series UL Listed RainTIGHT
RT Series Connectors Furnished WithIndustrial Grade Sealing Ring and
Steel Locknut
Set Screw Fittings Feature Steel ScrewsDeep Slots with HEX Heads Minimize Driver SlippageGet the Torque You Need Without EVER Cracking a Screw or a Fitting
Full Torque No Problem with Our EZ Torque™ Alloy SteelCompression Nuts
PRECISION MACHINE CUT THREADSProvide Full Torque ValuesNever “Cross-Thread” Another FittingSecures Conduit with Less Labor
AMFICO Quality Inspected DuringEACH Manufacturing Process
Provides You With theBEST Fitting in the World
GUARANTEED DIMENSIONAL CONSISTENCYPrecision Machined Alloy Steel FittingsGuaranteed Defect Free andConsistent From One Fitting To The NextFittings Are Exact-to-Size So Every FittingFits Perfectly Every TimeUniformed Surface Attaches Squarely to Boxes Hold Long Pipe Runs Straight and TrueHalf the Size & Weigth of MI Fittings. . .Less to Lift, Less to Hold
INTEGRITY OF PRODUCTS & MATERIALSManufactured by AMERICAN FITTINGS in the USAEach Fitting Stamped UL and USAFull Documentation on Every Fitting Made
Corrosion Resistant Alloy Steel is Industrial Grade Zinc Plating with Chromate Finish
Black Architectural, Blends in Dark Colored AreasRed Emergency Circuits. Fire Alarm & Security Systems.Orange Fiber Optic Circuits, Construction AreasYellow High Voltage WiringGreen Hospital & Healthcare Area Equipment, Hospital Call StationsBlue Low Voltage Wiring, Data Comm, VideoPurple Specialty Wiring SystemsWhite Architectural, Blends in Light Colored Areas
Note: Minimum Order Quantities May Apply, Consult Factory for Quantity and Leadtimes
AMFICO SPECtrum-ERC/ERS Color Coded FittingsQuick Identi�cation of Your Critical Systems or Blend for Architectural Design
Available:
Speed Up Your Wire Pulls with Our Super Smooth ID’s for EZ & FAST Wire Pulls
UL Listed Dual Ratedfor EMT & RigidStamped on Every Product
CompressionERC Series
Set ScrewERS Series
AMERICAN FITTINGS2-1/2” to 4” Couplings and ConnectorsUL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
AMERICAN FITTINGS2-1/2” to 4” Connectors Compression UL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
®
Since 1946
ERC Series: 2 1/2” to 4“ Trade Sizes EMT & Rigid/IMC Conduit Dual Rated Compression Fittings UL Listed & UL Approved Dual Use on EMT & Rigid/IMC Conduit
Alloy Steel Consruction Precision MachinedZinc Plated with Clear Chromate FinishFeatures: AMFICO’s EZ Torque Compression NutsFurnished with an Industrial Grade Steel Locknut
Twice the Strength and Brinell Hardnessof Malleable Iron Fittings
with 1/3 the WeightGreatly Reduces Hanging Loads
Improves Installation Time
Unique Low Pro�le Design Allows Greater Installation Space
Conforms to Conduit OD
This Product Replaces 2-1/2” to 4” EC and NT Series Fittings
Compliances:Certi�ed Made in the USAUL 514BCompression Fittings Concrete TightSuitable for Direct Burial **NEMA Standard FB1Federal Standard A-A-50553UL Standards: 514B, 467Certi�ed for MIL-STD 810 Sinusoidal VibrationsCSA Standard: C22.2 No. 18FRoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 3912131
E93605
** Consult Factory for Speci�cs
Available Options:RainTight Con�guration -”RT series” See Catalog Page* Insulated Throat - (Shown Above “B”) Galvanized Plating ** Painted Fittings Color Coded **
AMERICAN FITTINGS2-1/2” to 4” Couplings Compression UL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
®
Since 1946
Compliances:Certi�ed Made in the USAUL 514BCompression Fittings Concrete TightSuitable for Direct Burial **NEMA Standard FB1Federal Standard A-A-50553UL Standards: 514B, 467Certi�ed for MIL-STD 810 Sinusoidal VibrationsCSA Standard: C22.2 No. 18FRoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707
AMERICAN FITTINGS2-1/2” to 4” Connectors Set Screw UL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
®
Since 1946
ERS Series: 2 1/2” to 4“ Trade Sizes EMT & Rigid/IMC Conduit Dual Rated Set Screw Fittings UL Listed & UL Approved Dual Use on EMT & Rigid/IMC Conduit
Alloy Steel Consruction Precision MachinedZinc Plated with Clear Chromate FinishFeatures: AMFICO’s EZ Torque Combo-Hex/Slot Screws Furnished with an Industrial Grade Steel Locknut
Twice the Strength and Brinell Hardnessof Malleable Iron Fittings
with 1/3 the WeightGreatly Reduces Hanging Loads
Improves Installation Time
Unique Low Pro�le Design Allows Greater Installation Space
Conforms to Conduit OD
This Product Replaces 2-1/2” to 4” SS and SNT Series Fittings
Compliances:Certi�ed Made in the USAUL 514BSet Screw Fittings UL Rated Concrete Tight When TapedNEMA Standard FB1Federal Standard A-A-50553UL Standards: 514B, 467Certi�ed for MIL-STD 810 Sinusoidal VibrationsCSA Standard: C22.2 No. 18FRoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121434 E93605
** Consult Factory for Speci�cs
Available Options:Insulated Throat - (Shown Above “B”) Galvanized Plating ** Painted Fittings Color Coded **
Trade Size “ Cat # Con�guration Box
Qty. Weight Each lbs NAED UPC
2 1/2 ERS250BCONN Set Screw Connector w/Insul Throat
Set Screw Connector w/Insul Throat
Set Screw Connector w/Insul Throat
6 1.2 2 1/2 ERS250CONN 6 1.2
3 ERS300BCONN 6 1.7 3 ERS300CONN 6 1.7
3 1/2 ERS350BCONN 6 2.0 3 1/2 ERS350CONN 3 2.0
4 ERS400BCONN 3 2.4 4 ERS400CONN Set Screw Connector
AMERICAN FITTINGS2-1/2” to 4” Couplings Set Screw UL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
®
Since 1946
Compliances:Certi�ed Made in the USAUL 514BSet Screw Fittings UL Rated Concrete Tight When TapedNEMA Standard FB1Federal Standard A-A-50553UL Standards: 514B, 467Certi�ed for MIL-STD 810 Sinusoidal VibrationsCSA Standard: C22.2 No. 18FRoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39131707 E93605
** Consult Factory for Speci�cs
Trade Size “ Cat # Con�guration Box
Qty. Weight Each lbs NAED UPC
2 1/2 ERS250CPLG Set Screw Coupling Set Screw Coupling Set Screw Coupling Set Screw Coupling
5 1.1 3 ERS300CPLG 3 1.3
3 1/2 ERS350CPLG 2 1.6 4 ERS400CPLG
133 66236405836
171 66236405837
205 66236405838
238 66236405839
2 1.7
A B C D
2-1/2"
3"
3-1/2"
4"
Dimensions
Size
ERS Series: 2 1/2” to 4“ Trade Sizes EMT & Rigid/IMC Conduit Dual Rated Set Screw Fittings UL Listed & UL Approved Dual Use on EMT & Rigid/IMC Conduit
Alloy Steel Consruction Precision MachinedZinc Plated with Clear Chromate FinishFeatures: AMFICO’s EZ Torque Combo-Hex/Slot Screws
This Product Replaces 2-1/2” to 4” EC and NT Series Fittings
Twice the Strength and Brinell Hardnessof Malleable Iron Fittings
with 1/3 the WeightGreatly Reduces Hanging Loads
Improves Installation Time
Unique Low Pro�le Design Allows Greater Installation Space
Conforms to Conduit OD
Available Options:* Galvanized Plating ** Painted Fittings Color Coded **
AMERICAN FITTINGS2-1/2” to 4” Rain TIGHT Connectors Compression UL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
®
Since 1946
ERC RT Series: 2 1/2” to 4“ Trade Sizes EMT & Rigid/IMC Conduit Dual Rated Rain TIGHT Compression Fittings UL Listed & UL Approved Dual Use on EMT & Rigid/IMC Conduit
Alloy Steel Consruction Precision MachinedZinc Plated with Clear Chromate FinishFeatures: AMFICO’s EZ Torque Compression NutsFurnished with an Industrial Grade Steel Locknut andSealing Washer
Twice the Strength and Brinell Hardness
of Malleable Iron Fittings with 1/3 the Weight
Greatly Reduces Hanging Loads
Improves Installation Time
Unique Low Pro�le Design Allows Greater Installation Space
Conforms to Conduit OD
This Product Replaces 2-1/2” to 4” EC and NT Series Fittings
Compliances:Certi�ed Made in the USAUL 514B UL Listed Rain TightCompression Fittings Concrete TightSuitable for Direct Burial NEMA Standard FB1Federal Standard A-A-50553UL Standards: 514B, 467Certi�ed for MIL-STD 810 Sinusoidal VibrationsCSA Standard: C22.2 No. 18FRoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121311
E93605
** Consult Factory for Speci�cs
Available Options:Insulated Throat - (Shown Above “B”) Galvanized Plating ** Painted Fittings Color Coded **
AMERICAN FITTINGS2-1/2” to 4” Rain TIGHT Couplings Compression UL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
®
Since 1946
Compliances:Certi�ed Made in the USAUL 514B UL Listed Rain TightCompression Fittings Concrete TightSuitable for Direct Burial **NEMA Standard FB1Federal Standard A-A-50553UL Standards: 514B, 467Certi�ed for MIL-STD 810 Sinusoidal VibrationsCSA Standard: C22.2 No. 18FRoHS Compliant REACH Compliant CA Prop 65 Compliant UNSPSC 39121311
AMERICAN FITTINGS2-1/2” to 4” EMT/RGS Conduit Adapters UL Rated & Listed for Dual Use on EMT & Rigid/IMC Conduit
®
Since 1946
STR ERC Series: 2 1/2” to 4“ Trade Sizes (other sizes available 1/2”-2”) EMT & Rigid/IMC Conduit Dual Rated UL Listed & UL Approved Dual Use on EMT & Rigid/IMC Conduit
Alloy Steel Consruction Precision MachinedZinc Plated with Clear Chromate FinishGalvanized Plating AvailableExtended Length Ferrule Prevents Seal Tight Pullout & Tight Bend Conduit Issues
Features: AMFICO’s EZ Torque Compression Nut
AMFICO Adapter Series Converts EMT / Rigid Conduit Runs to Seal Tight Conduit
Available in Threaded* or Compression Con�gurations, with Rain TIGHT Option* Threaded for use on Rigid Conduit Only
SPEC Connector System
FLEX Series Industrial Flexible Metal Conduit Adapter
AMFICO Adapter Series Converts EMT / Rigid Conduit Runs to FMC (Green�eld)SPEC�ex is the Industrial Alternative to Inferior Squeeze Fittings
FMC to EMT / Rigid Compression
FMC to EMT / Rigid Set Screw
FMC to EMT / Rigid Compression
Adapter Fittings Compliances:Certi�ed Made in the USAUL 514BCompression Fittings Concrete TightSuitable for Direct Burial ** NEMA Standard FB1Federal Standard A-A-50553UL Standards: 514B, 467CSA Standard: C22.2 No. 18FRoHS Compliant REACH Compliant CA Prop 65 Compliant
** LT Adapter Only Consult Factory for Details
E93605
AMFICO Adapters or Combination Couplings used to Transition Conduit ConnectionsMade in the USA, Alloy Steel Construction
Page 10
STR FLX Series: 2 1/2” to 4“ Trade Sizes (other sizes available 1/2”-2”) EMT & Rigid/IMC Conduit Dual Rated UL Listed & UL Approved Dual Use on EMT & Rigid/IMC Conduit
Solid Steel Fully Machined SPEC�ex Connector withAMFICO Industrial ERC Fitting (Set Screw or Compression)Fittings are Solid Steel Zinc Plated with Chromate Finish
Fitting Installs on FMC Without a Tool, It Turns On By Hand Exceeds UL Pullout by 300%
Full Product Information Available in our SPEC�ex Catalog
Better Products, Better Ideas, Better Value, Think AMERICAN
Innovating the Next Generation of Electrical Fittings
AgricultureAlternative EnergyData CentersFederal & State ProjectsFood Processing & ProductionHospitals and Medical CentersIndustrial Applications
Founded in 1946, a family owned and operated, 3rd generation business, we have grown into the world’s largest manufacturer of alloyOur products are made in the USA, and they will exceed your requirements and expectations, not your budget. We never apologize why our products are made in America; we suggest you ask our competitors “why they don’t”! Random lot shipping inspection in a foreign country can never replace integrity manufactured into raw materials and manufacturing
Who says, integrity and quality of products have to be expensive?We Guarantee It!