1 Amarr ® Commercial Sectional Doors www.amarr.com
1
Amarr®
Commercial Sectional Doors
www.amarr.com
ALUMINUM MULTIVIEW DOOR
ALUMINUM FULL VIEW DOORS
POLYURETHANE INSULATED STEEL DOORS
POLYSTYRENE INSULATED STEEL DOORS
RIBBED PANEL STEEL DOORS
IMPACT SECTION & DOORS
WIND LOAD & TRACK OPTIONS
PRODUCT SPECIFICATIONS & AMARR COLOR ZONE
CASE STUDIES
STRENGTHINDUSTRIAL
4
6
8
10
12
14
15
16
18
3STRENGTHINDUSTRIAL
PRODUCTS
Entrematic offers a wide range of high-quality, LEED qualified, sustainable products to meet the needs of architects, specifiers, and building professionals.
Amarr doors are designed and tested in our state-of-the-art research facility and manufactured to meet or exceed industry standards.
Our wind load approved and hurricane rated commercial doors meet or exceed building code requirements. See page 15 for more information.
SERVICE
Our Door Centers, strategically located throughout North America, supply our products to over 3,000 professional door dealers and installers.
SUPPORT
Ace Commercial Experts (ACE) provide dealer support for our commercial products, programs, systems, and training. Contact 866.366.4814 or [email protected].
Free AIA accredited continuing education courses.
ARCHITECT RESOURCES
architects.amarr.com
• Product Brochures
• 3-Part Specifications
• CAD/BIM Details
• SketchUp Models
• Installation Instructions
• LEED Documentation
• Lunch & Learn Education
Why Choose Amarr Commercial Sectional Doors?
bsdsoftl ink.com
aecdaily.com
arcat.com
sweets.construction.com
e-specs.com
masterspec.com
caddetails.com
3dwarehouse.sketchup.com
MasterSpec®
4 A L U M I N U M M U L T I V I E W
Aluminum MultiView Doors
CONSTRUCTION
SINGLE-LAYERAluminum
Amarr 3582 MultiView Aluminum door
Amarr 3582 Aluminum MultiView doors make a unique design statement with the
widest single piece of glass that specifications, safety, and reliability standards allow.
Constructed of 2" thick extruded aluminum rails and stiles, these doors are built to
last. The ClearView Aluminum Strut System provides strength and durability without
restricting the viewing area. With a wide selection of glass, acrylic and polycarbonate
glazing options, in more than two dozen paint and anodize finishes, the Amarr 3582 is
a distinctive choice for any building where style and functionality are important.
• 2" thick extruded aluminum rails & stiles
• Tongue and groove section joints provide additional protection against the elements
• Equal glass heights in all sections of a door
• Glass expanses up to 8'2" wide
SPECIFICATIONS GLAZING OPTIONS
2 It is your responsibility to make sure your garage door meets local building codes.3 For complete warranty details, visit amarr.com or contact your local Amarr dealer.
1 For complete door height configuration chart visit amarr.com or contact your local Amarr dealer.
MATERIAL
CONSTRUCTION LAYERS
DOOR THICKNESS
SECTION HEIGHTS1
MINIMUM DOOR WIDTH
MAXIMUM DOOR WIDTH
MINIMUM DOOR HEIGHT1
MAXIMUM DOOR HEIGHT1
CLEARVIEW STRUT SYSTEM
WIND LOAD2 AVAILABLE
FINISH WARRANTY 3
WORKMANSHIP/HARDWARE WARRANTY 3
GLASS WARRANTY3
Aluminum
Single
2" (5.1cm)
Varies by door height
2' 0"
20' 2" (in 1" increments)
6' 0"
20' 1"
Only required for doors ≥ 16'
NA
5 Years
1 Year
1 Year
Amarr 3582
CLEAR
OBSCURE
GRAY
BRONZE
GREEN
FROST
SNOW
WHITEOUT
BLACK ICE
STD
•
•
•
•
•
• •
•
•
•
•
•
3/16" 3/16" Low-E 1/4" 1/4"
Low-E 1/4"
Tempered
•
•
•
•
•
•
•
•
•
1/2" 1/2" Low-E
TemperedLami-nated
• • •
•
•
•
Single 1/8"
Single 1/4"
Tri-Wall 5/8"
Polycarbonate
• • •
1/8" 1/4" 1/2"
Acrylic
Single Pane Insulated
Extruded Aluminum Frame
ClearViewAluminum Strut
BottomWeather Seal
Amarr 3582
Tongue & GrooveJoint
Glass Panel
5A L U M I N U M M U L T I V I E W
Actual color may vary from samples shown. COLORS
BONE WHITE SANDSTONE BURNT SUNWHITE (PVDF) IVORY SIERRA TAN
BEIGE LIGHT SEAWOLF BEIGE
SLATE GRAY CHARCOAL GRAYDOVE GRAY PATINA GREEN
DARK IVY HARTFORD GREEN
INTERSTATE BLUE COLONIAL REDMILITARY BLUE BOYSENBERRY
SAGE BROWN CHAMPAGNE PEARL†
QUAKER BRONZE SUPER BLACK CARNIVAL RED II† CLASSIC COPPER†
PEWTER† SILVER†
†PVDF only.
Special Order
CHAMPAGNE (AH) MEDIUM BRONZE (AM)COPPER (AC)
Longer lead time and price upcharge apply.ANODIZE
PVDF (Kynar®) & Powder CoatPAINT
DARK BRONZE (AD)CLEAR (AN) BLACK (BA) WHITE Powder Coat (WH)
PAINT
In Stock
Door Width
Up to 8' 2"
8' 3" – 16' 2"
16' 3" – 20' 2"
# Center Stiles
0
1
2
# Windows/Section
2
4
6
For Single Pane GlazingUp to 8'2" Wide – 1 Panel 8'3"-16'2" Wide – 2 Panels
16' 3"- 20' 2" Wide – 3 Panels
Door Width
Up to 10' 2"
10' 3" – 16' 2"
16' 3" – 20' 2"
# Center Stiles
1
2
3
# Windows/Section
4
6
8
For Insulated GlazingUp to 10'2" Wide – 2 Panels 10'3"-16'2" Wide – 3 Panels
16' 3"- 20'2" Wide – 4 Panels
DOOR CONFIGURATIONS
Amarr 3582 with Champagne Pearl (PVDF) frame and Clear glass.
Amarr 3582 with Champagne Pearl finish and Clear glass
ANODIZE
Longer lead time and price upcharge apply.
FADE RESISTANT
CORROSION RESISTANT
UV RESISTANT
ABRASION RESISTANT
STANDARD COLORS
RAL/CUSTOM COLORS PRICE UPCHARGE
TOUCH-UP PAINT
++
++
++
+
26
$
Included
PVDF (Kynar®) Powder Coat
+
+
+
++
21
$$
NOT included
RAL & CUSTOM PAINT FINISH COLORS AVAILABLELonger lead time and price upcharge apply.
Amarr Aluminum Full View doors can be fitted with a variety of full view glass
options, solid aluminum, perforated or louvered ventilation panels. Full View panels
can also be used in Amarr sectional steel doors. Perfect for service stations, car
washes, fire houses, restaurants, and sports complexes; our aluminum doors create
a clean style for any facility.
• 2" thick extruded commercial-grade aluminum frame provides durability, low maintenance and corrosion resistance
• Tongue and groove section joints and bottom weather seal provide additional protection against the elements
• Heavy-duty through bolt construction
• Available in 1" width increments
• ClearView Aluminum Strut System does not restrict viewing area and adds strength and durability to doors; available up to 24' wide doors (Amarr 3552 only)
• Amarr 3552 available in odd height doors
Aluminum Full View Doors
SPECIFICATIONS
CONSTRUCTION
GLAZING OPTIONS
SINGLE-LAYERAluminum
Amarr 3552 Heavy-Duty Aluminum door
Amarr 3502 Medium-Duty Aluminum door
Full ViewGlass Panels
Aluminum Panel
ClearViewAluminum Strut
BottomWeather Seal
Amarr 3502Amarr 3552
BottomWeather Seal
Aluminum Panel
Full ViewGlass Panels
6 A L U M I N U M F U L L V I E W
MATERIAL
CONSTRUCTION LAYERS
PANEL OPTIONS
Full View
Perforated
Louvered Ventilation
Aluminum
Insulated Aluminum
DOOR THICKNESS
MINIMUM WIDTH
MAXIMUM WIDTH
MINIMUM HEIGHT
MAXIMUM HEIGHT
SECTION HEIGHTS1
WIND LOAD2 AVAILABLE
FINISH WARRANTY3
WORKMANSHIP/HARDWARE WARRANTY3
Aluminum
Single
•
•
•
•
•
2" (5.1cm)
2'
24' 2"
6'
20' 1"
18", 21", 24"
•
5 Years
1 Year
Aluminum
Single
•
•
2" (5.1cm)
2'
12' 2"
6'
12' 1"
21", 24"
•
5 Years
1 Year
Amarr 3552
Heavy-duty
Amarr 3502
Medium-duty
2 It is your responsibility to make sure your garage door meets local building codes.3 For complete warranty details, visit amarr.com or contact your local Amarr dealer.
1 For complete door height configuration chart visit amarr.com or contact your local Amarr dealer.
CLEAR
OBSCURE
GRAY
BRONZE
GREEN
FROST
SNOW
WHITEOUT
BLACK ICE
STD
•
•
•
•
•
• •
•
•
•
•
•
1/8" 1/8" Low-E 1/4" 1/4"
Low-E 1/4"
Tempered
•
•
•
•
•
•
•
•
•
1/2" 1/2" Low-E
TemperedLami-nated
• • •
•
•
•
Single 1/8"
Single 1/4"
Tri-Wall 5/8"
Polycarbonate
• • •
1/8" 1/4" 1/2"
Acrylic
Single Pane Insulated
Amarr 3502 not available in ¼" or insulated glass.
Tongue & GrooveJoint
PANEL OPTIONS
*Also available in Mill finish.
PERFORATED ALUMINUM*0.312" square perforations on ½" centers
LOUVERED ALUMINUM6 columns of (12) 3"x 3/4" vents on a 4' x 24" panel
ALUMINUM & INSULATED ALUMINUM
7A L U M I N U M F U L L V I E W
Amarr 3552 in Clear Anodize finish with two Louvered Aluminum bottom sections
Amarr 3552 in Dark Bronze (custom stile arrangement)
FADE RESISTANT
CORROSION RESISTANT
UV RESISTANT
ABRASION RESISTANT
STANDARD COLORS
RAL/CUSTOM COLORS PRICE UPCHARGE
TOUCH-UP PAINT
++
++
++
+
26
$
Included
PVDF (Kynar®) Powder Coat
+
+
+
++
21
$$
NOT included
RAL & CUSTOM PAINT FINISH COLORS AVAILABLELonger lead time and price upcharge apply.
Actual color may vary from samples shown. COLORS
BONE WHITE SANDSTONE BURNT SUNWHITE (PVDF) IVORY SIERRA TAN
BEIGE LIGHT SEAWOLF BEIGE
SLATE GRAY CHARCOAL GRAYDOVE GRAY PATINA GREEN
DARK IVY HARTFORD GREEN
INTERSTATE BLUE COLONIAL REDMILITARY BLUE BOYSENBERRY
SAGE BROWN CHAMPAGNE PEARL†
QUAKER BRONZE SUPER BLACK CARNIVAL RED II† CLASSIC COPPER†
PEWTER† SILVER†
†PVDF only.
Special Order
CHAMPAGNE (AH) MEDIUM BRONZE (AM)COPPER (AC)
Longer lead time and price upcharge apply.ANODIZE
PVDF (Kynar®) & Powder CoatPAINT
DARK BRONZE (AD)CLEAR (AN) BLACK (BA) WHITE Powder Coat (WH)
PAINT
In StockANODIZE
Longer lead time and price upcharge apply.
Amarr 3502 available in Clear anodize only.
Amarr polyurethane insulated products are our top-of-the-line energy efficient, high
R-value doors; constructed using foamed-in-place, CFC-free polyurethane insulation
to create a strong monolithic panel. Each model is secured with heavy-duty 14-gauge
minimum galvanized steel hinges.
• New tongue and groove profile combined with the improved thermal break design and placement enhances air and water infiltration performance
• Accommodates a variety of weather seals including longer drop to guard against air and water leakage on uneven floor surfaces
• 20-gauge steel interior hinge reinforcement (continuous strip or backer plate) ensure hinges are always anchored in steel for added structural integrity
Energy Efficient Polyurethane Insulated Steel Doors
SPECIFICATIONS
CONSTRUCTION
Available for Amarr 2742 and Amarr 2042 only in door sizes up to 16'2"wide x 16' tall. Wind load option not available.
R-Value
19.4Amarr 2042 Extra Heavy-Duty, 2" 20-gauge steel
R-Value
19.4
R-Value
14.5
Amarr 2742B / 2742C Heavy-Duty, 2" 27-gauge steel
Amarr 2741 Medium-Duty, 1-3/8" 27-gauge steel
TRIPLE-LAYERSteel + Insulation + Steel
8 P O L Y U R E T H A N E I N S U L A T E D S T E E L D O O R S
OPTIONAL PASS DOOR with stainless steel frame
See page 15 for details.
1 Insulation has passed self-ignition, flamespread and smoke developed index fire testing.
3 It is your responsibility to make sure your garage door meets local building codes.4 For complete warranty details, visit amarr.com or contact your local Amarr dealer.
2 Amarr 2741 calculated door section R-value is in accordance with DASMA TDS-163. Amarr 2042 and 2742 R-value tested and verified in accordance to ASTM 518 by an independent lab.
STEEL THICKNESS (Front/Back)
PANEL DESIGN
STEEL EMBOSSMENT
DOOR THICKNESS
CONSTRUCTION LAYERS
HINGE REINFORCEMENT
INSULATION1
R-VALUE2
MINIMUM WIDTH
MAXIMUM WIDTH
MINIMUM HEIGHT
MAXIMUM HEIGHT
PASS DOOR
RAPID INSTALL VERTICAL LIFT
WIND LOAD3 AVAILABLE
PAINT FINISH WARRANTY4
WORKMANSHIP/HARDWARE WARRANTY4
20 ga / 27 ga
Flush
Stucco
2" (5.1cm)
Triple
Continuous Strip
Polyurethane
19.4
5'
40' 2"
7'
26' 1"
•
•
•
10 Years
1 Year
27 ga / 27 ga
Pencil Groove
Stucco
2" (5.1cm)
Triple
Polyurethane
19.4
5'
40' 2"
7'
26' 1"
•
•
•
10 Years
1 Year
27 ga / 27 ga
Pencil Groove
Stucco
1-3/8" (3.5cm)
Triple
Backer Plate
Polyurethane
14.5
5'
20' 2"
7'
14' 1"
•
•
10 Years
1 Year
Amarr 2042
Extra Heavy-Duty
Amarr 2741
Medium-Duty
2742B
Heavy-Duty
2742C
Continuous Strip
Backer Plate
Steel Exterior
Polyurethane Insulation
Steel Interior
Bottom Weather Seal
Interior Hinge Reinforcement
1-3/8"
Steel Exterior
Polyurethane Insulation
Steel Interior
Bottom Weather Seal
Interior Hinge Reinforcement
2"
Energy Efficient Polyurethane Insulated Steel Doors
Amarr steel doors are pre-painted; for custom colors, exterior latex paint must be used.Visit amarr.com for instructions on painting. Actual paint colors may vary from samples shown.STEEL COLORS
SANDTONE (ST)Amarr 2742Amarr 2741 (Fall 2018)
COMMERCIAL GRAY (CY)
COMMERCIAL BROWN (CB)
PANEL DESIGNS
AMARR 2741 AND 2742: PENCIL GROOVED WITH STUCCO EMBOSSMENT
AMARR 2042: FLUSH PANEL WITH STUCCO EMBOSSMENT
*Available for Amarr 2042 and Amarr 2742 only. †Also available in Mill finish.
CLEAR ANODIZE
DARK BRONZE ANODIZE
BLACK ANODIZE
WHITE POWDER COAT
Actual color may vary from samples shown. See page 5 for additional finish options.
ALUMINUM SECTION OPTIONS*
PERFORATED ALUMINUM†0.312" square perforations on ½" centers
LOUVERED ALUMINUM6 columns of (12) 3"x 3/4" vents on a 4' x 24" panel
GLAZED ALUMINUM
9P O L Y U R E T H A N E I N S U L A T E D S T E E L D O O R S
WINDOW OPTIONS
Amarr 2742 in Commercial Brown with 2 Dark Bronze Aluminum Full View sections
TRUE WHITE (TW)
Amarr 2742 in White with 26”x13” windows
Impact resistant sections are the answer to lower door section damage common in today’s busy warehouses. Made with high-performance TPO skins on a flexible fiberglass tube frame. Available in widths up to 12' 2". Available for 2042 and 2742 only. See page 14 for more information.
SUPERFLEX SECTION OPTION
Over 600 factory-applied colors. Price upcharge applies. See page 17.
Amarr 2742Amarr 2741 (Fall 2018)
Amarr 2742Amarr 2741 (Fall 2018)
26" x 13" DOUBLE INSULATED ACRYLIC WINDOWS with BLACK FRAME
24" x 6" DOUBLE INSULATED ACRYLIC WINDOWS with BLACK FRAME
24"x 12" TEMPERED INSULATED GLASS
Available with either a black or white frame.
Available for Amarr 2042 and 2742 only.
24" x 8" TEMPERED INSULATED with BLACK FRAME
Amarr 2" polystyrene insulated doors feature two
solid steel skins and an advanced 4-step insulation
system making these doors strong and durable.
The Amarr 2432 has a heavy-duty 24-gauge steel
exterior featuring a stucco embossment with
shallow pencil grooves. The Amarr 2732 exterior
is made from 27-gauge steel with the same panel
design and embossment.
• R-Value: 9.4
• Heavy-duty hardware for smooth operation, long life and low maintenance
• Stucco embossed interior surface camouflages day-to-day wear and tear
• CFC-free polystyrene insulation is eco-friendly and chemically bonded to the steel panels building strength and energy efficiency
Polystyrene Insulated Steel Doors
Steel Exterior
Polystyrene Insulation
Steel Interior
Bottom Weather Seal
R-Value
9.4Amarr 2432Heavy-Duty, 2" 24-gauge steel
PANEL DESIGN
PENCIL GROOVE WITH STUCCO EMBOSSMENT
CONSTRUCTION
TRIPLE-LAYERSteel + Insulation + Steel
10 H E A V Y - D U T Y I N S U L A T E D S T E E L D O O R S
Amarr 2432 in White with 24”x6” windows
SPECIFICATIONS
COLORS
TRUE WHITE (TW) SANDTONE (ST) COMMERCIAL GRAY (CY)
COMMERCIAL BROWN (CB)
24" x 6" DOUBLE INSULATED ACRYLIC24" X 12" TEMPERED INSULATED GLASSAvailable with either a black or white frame. Available with black frame.
WINDOW OPTIONS
See page 15 for details.
1 Insulation has passed self-ignition, flamespread and smoke developed index fire testing.2 Calculated door section R-value is in accordance with DASMA TDS-163.3 It is your responsibility to make sure your garage door meets local building codes.4 For complete warranty details, visit amarr.com or contact your local Amarr dealer.
R-Value
9.4Amarr 2732Medium-Duty, 2" 27-gauge steel
Steel Exterior
Polystyrene Insulation
Steel Interior
Bottom Weather Seal
Amarr 2732Amarr 2432
STEEL THICKNESS (Exterior/Interior)
PANEL DESIGN
STEEL EMBOSSMENT
DOOR THICKNESS
CONSTRUCTION LAYERS
INSULATION1
R-VALUE2
U-VALUE
AIR INFILTRATION
MINIMUM WIDTH
MAXIMUM WIDTH
MINIMUM HEIGHT
MAXIMUM HEIGHT
WIND LOAD3 AVAILABLE
PAINT FINISH WARRANTY4
WORKMANSHIP/HARDWARE WARRANTY4
24 ga / 27 ga
Pencil Groove
Stucco
2" (5.1cm)
Triple
Polystyrene
9.4
0.106
.18 cfm/ft2 @ 15 mph /.30 cfm/ft2 @ 25 mph
6'
24' 2"
7'
26' 1"
•
10 Years
1 Year
Amarr 2432
Heavy-Duty
27 ga / 27 ga
Pencil Groove
Stucco
2" (5.1cm)
Triple
Polystyrene
9.4
0.106
.18 cfm/ft2 @ 15 mph /.30 cfm/ft2 @25 mph
6'
24' 2"
7'
26' 1"
•
10 Years
1 Year
Amarr 2732
Medium-Duty
Over 600 factory-applied colors. Price upcharge applies. See page 17.
SUPERFLEX SECTION OPTION
FLEXIBLE IMPACT SECTION – see page 14 for more information.
Solid commercial construction meets variety and
style. The Amarr 2731 is built with two 27-gauge
steel layers surrounding a 1-3/8" polystyrene core.
For style, the exterior layer features a flush profile
with woodgrain embossment for a more upscale
look reminiscent of typical residential doors. The
interior skin features a flush profile with stucco
embossment for a clean interior surface.
• R-Value: 6.7
• Four-step insulation system provides protection from the elements with tongue and groove construction, insulation, weather-stripping and a thermal break
• CFC-free polystyrene insulation is eco-friendly and chemically bonded to the steel panels building strength and energy efficiency
Medium-Duty Polystyrene Insulated Steel Doors
Steel Exterior
Polystyrene Insulation
Steel Interior
Bottom Weather Seal
R-Value
6.7Amarr 2731 Medium-Duty, 1-3/8" 27-gauge steel
SPECIFICATIONS PANEL DESIGN
FLUSH PANEL WITH WOODGRAIN EMBOSSMENT
COLORS
TRUE WHITE (TW) ALMOND (AL) WICKER TAN (WK) SANDTONE (ST)
CONSTRUCTION
TRIPLE-LAYERSteel + Insulation + Steel
11M E D I U M - D U T Y I N S U L A T E D S T E E L D O O R S
Amarr 2731 in Wicker Tan with 41”x13” windows
* True White shown; also available in Almond, Wicker Tan, and Sandtone. Available with Clear, Obscure, or Insulated glass.
WINDOW OPTIONS
21" x 13" SHORT PANEL* 41" x 13" LONG PANEL* 24" x 6" DOUBLE INSULATED ACRYLICAvailable with black frame.
STEEL THICKNESS (Exterior/Interior)
PANEL DESIGN
STEEL EMBOSSMENT
DOOR THICKNESS
CONSTRUCTION LAYERS
INSULATION1
R-VALUE2
U-VALUE
MINIMUM WIDTH
MAXIMUM WIDTH
MINIMUM HEIGHT
MAXIMUM HEIGHT
WIND LOAD3 AVAILABLE
PAINT FINISH WARRANTY4
WORKMANSHIP/HARDWARE WARRANTY4
27 ga / 27 ga
Flush
Woodgrain
1-3/8" (3.5cm)
Triple
Polystyrene
6.7
0.149
6'
18' 2"
7'
14' 1"
•
10 Years
1 Year
Amarr 2731
Medium-Duty
See page 15 for details.
1 Insulation has passed self-ignition, flamespread and smoke developed index fire testing.2 Calculated door section R-value.3 It is your responsibility to make sure your garage door meets local building codes.4 For complete warranty details, visit amarr.com or contact your local Amarr dealer.
Over 600 factory-applied colors. Price upcharge applies. See page 17.
CONSTRUCTION
Steel Exterior
Bottom Weather Seal
Steel Exterior
Polystyrene Insulation
25 ga Steel Backer
Bottom Weather Seal
SINGLE-LAYERSteel
• Deeply ribbed panel with a smooth texture
• Can be field-modified with CFC-free polystyrene insulation with a nylon or steel backer
• Tongue and groove construction with three positive points of contact provides a more efficient barrier against moisture and air infiltration
• U-shaped vinyl bottom weather seal in a full-length PVC retainer effectively keeps out the elements
TRIPLE-LAYERSteel + Insulation + Steel
Amarr 2" ribbed panel steel doors, insulated and non-insulated, are the industry
workhorses and our most versatile doors. Choose from extra heavy-duty 20-gauge,
heavy-duty 24-gauge and medium-duty nominal 24-gauge steel. From manufacturing
plant to auto dealerships, these doors keep working wherever they are installed.
Ribbed Panel Steel Doors
R-Value
7.0Amarr 2002, 2012, 2022 Extra Heavy-Duty, 20-gauge steel
R-Value
7.0
R-Value
7.0
Amarr 2402, 2412, 2422 Heavy-Duty, 24-gauge steel
Amarr 2502, 2512, 2522 Medium-Duty, nominal 24-gauge steel
12 R I B B E D P A N E L S T E E L D O O R S
Amarr 2002/2402/2502
Steel Exterior
Vinyl-CoatedPolystyrene Insulation
VinylBacker
Bottom Weather Seal
DOUBLE-LAYERSteel + Insulation
Amarr 2012/2412/2512 Amarr 2022/2422/2522
SPECIFICATIONS
STEEL THICKNESS (Exterior/Interior)
PANEL DESIGN
STEEL EMBOSSMENT
DOOR THICKNESS
CONSTRUCTION LAYERS
INSULATION1
R-VALUE2
U-VALUE
MINIMUM WIDTH
MAXIMUM WIDTH
MINIMUM HEIGHT
MAXIMUM HEIGHT
WIND LOAD3 AVAILABLE
PAINT FINISH WARRANTY4
WORKMANSHIP/HARDWARE WARRANTY4
20 ga
Deep Ribbed
Smooth
2" (5.1cm)
Single
6'
26' 2"
7'
26' 1"
•
10 Years
1 Year
20 ga
Deep Ribbed
Smooth
2" (5.1cm)
Double
Polystyrene
7.0
0.143
6'
26' 2"
7'
26' 1"
•
10 Years
1 Year
20 ga / 25 ga
Deep Ribbed
Smooth
2" (5.1cm)
Triple
Polystyrene
7.0
0.143
6'
26' 2"
7'
26' 1"
•
10 Years
1 Year
24 ga
Deep Ribbed
Smooth
2" (5.1cm)
Single
6'
30' 2"
7'
26' 1"
•
10 Years
1 Year
Extra Heavy-Duty
Amarr 2002 Amarr 2012 Amarr 202224 ga
Deep Ribbed
Smooth
2" (5.1cm)
Double
Polystyrene
7.0
0.143
6'
30' 2"
7'
26' 1"
•
10 Years
1 Year
24 ga / 25 ga
Deep Ribbed
Smooth
2" (5.1cm)
Triple
Polystyrene
7.0
0.143
6'
30' 2"
7'
26' 1"
•
10 Years
1 Year
Nominal 24 ga
Deep Ribbed
Smooth
2" (5.1cm)
Single
6'
20' 2"
7'
14' 1"
•
10 Years
1 Year
Nominal 24 ga
Deep Ribbed
Smooth
2" (5.1cm)
Double
Polystyrene
7.0
0.143
6'
20' 2"
7'
14' 1"
•
10 Years
1 Year
Heavy-Duty
Amarr 2402 Amarr 2412 Amarr 2422Nominal 24 ga / 25 ga
Deep Ribbed
Smooth
2" (5.1cm)
Triple
Polystyrene
7.0
0.143
6'
20' 2"
7'
14' 1"
•
10 Years
1 Year
Medium-Duty
Amarr 2502 Amarr 2512 Amarr 2522
See page 15 for details.
1 Insulation has passed self-ignition, flamespread and smoke developed index fire testing.2 Calculated door section R-value.3 It is your responsibility to make sure your garage door meets local building codes.4 For complete warranty details, visit amarr.com or contact your local Amarr dealer.
PANEL DESIGN
RIBBED PANEL
Amarr steel doors are pre-painted; for custom colors, exterior latex paint must be used.Visit amarr.com for instructions on painting. Actual paint colors may vary from samples shown.STEEL COLORS
24" X 6" DSB or PLEXIGLAS®24" X 12" SINGLE PLEXIGLAS®24" X 12" INSULATED PLEXIGLAS®
WINDOW OPTIONS Available with either a black or white frame.
13R I B B E D P A N E L I N S U L A T E D S T E E L D O O R S
†Also available in Mill finish.
CLEAR ANODIZE DARK BRONZEANODIZE
BLACK ANODIZE WHITE POWDER COAT
Actual color may vary from samples shown. See page 5 for additional finish options.
ALUMINUM SECTION OPTIONS
PERFORATED ALUMINUM†
0.312" square perforations on ½" centersLOUVERED ALUMINUM6 columns of (12) 3"x 3/4" vents on a 4' x 24" panel
GLAZED ALUMINUM
Amarr 2412 in Commercial White with 24”x6” windows
COMMERCIAL WHITE (WH)
COMMERCIAL GRAY (CY)2402/2412/2422 only
COMMERCIAL BLACK (BG)*
COMMERCIAL BROWN (CB)2402/2412/2422 only 2402/2412/2422 only
Amarr 2512 in Commercial White with 2 White Aluminum Full View sections
SUPERFLEX SECTION OPTION
FLEXIBLE IMPACT SECTION – see page 14 for more information.
*Price upcharge applies.
Over 600 factory-applied colors. Price upcharge applies. See page 17.
14 I M P A C T S E C T I O N & D O O R S
Amarr SuperFlex impact resistant sections are the answer to lower door section damage common in today’s busy warehouses.
CONSTRUCTION
■ High-performance Thermoplastic Polyolefin (TPO) interior and exterior polymer skin ■ Flexible fiberglass tube frame with steel corner brackets ■ Insulated 1-3/4" thick section with an 8.5 R-value
FEATURES
■ Flexes in and out an average of 8"–10" ■ Suitable for environmental temperatures from 20°F to 131°F (-7°C to 54°C) ■ Retrofits to most 1-1/2" – 2" thick sectional doors ■ Provides an exceptional thermal seal
BENEFITS
■ Reduced lower door section damage ■ Reduced maintenance costs ■ Excellent UV resistance ■ Outstanding chemical resistance ■ Seals against tongue & groove or shiplap door sections
SIZE AVAILABILITY
■ Section heights: 18", 21" and 24" ■ Section widths: 8'2", 9'2", 10'2" and 12'2" (custom widths available up to 12’2”)
DOOR AVAILABILITY
■ One- or two-section configurations ■ Polyurethane Insulated – Amarr 2042 and 2742 ■ Polystyrene Insulated – Amarr 2432 and 2732 ■ Ribbed Panel – all models
Unique construction of the Amarr SuperFlex section allows it to flex; providing durability and reliable operations.
Amarr SuperFlex sections flex upon impact and return to normal operating position.
Flexible Impact
Amarr SuperFlex
Damage-resistant, industrial KnockOut doors designed to flex and withstand damage to the door panels and track when impacted. These doors are a long-term, lower-cost solution than frequently replacing damaged dock doors.
Amarr KnockOut Doors
Amarr KnockOut doors prevent recurring damage to loading dock doors and track.
PRODUCTS
■ Amarr 6632 Impact KnockOut Versatile and cost-effective ■ Amarr 6600 Non-Insulated SuperImpact KnockOut Rugged protection ■ Amarr 6635 Insulated SuperImpact KnockOut Withstands severe damage ■ Amarr 6634 SuperTherm KnockOut Ideal for cold storage facility
15
¹ Exposure B with a mean roof height less than 30' based on ASCE7-10. (57/-67 PSF)
² Option available on select models only.
When installed according to our instructions and local building codes, Amarr hurricane rated doors:
• Withstand rapid cyclic pressure and static load forces up to 240 mph.¹
• Resist large missile impact at 50' per second (35 mph).²
Amarr wind load rated doors meet or exceed these building codes:
• Florida Building Code (FBC)
• International Code Council (ICC)
• Texas Department of Insurance (TDI)
• High-Velocity Hurricane Zone (HVHZ) (Miami – Dade and Broward Counties)
Amarr Wind Load Rated Commercial Doors
W I N D L O A D & T R A C K L I F T O P T I O N S
FOLLOW THE ROOF PITCH2" TRACKHeadroom 12" Radius = 12-3/4" 15" Radius = 15-1/2" Sideroom = 5"
3" TRACKHeadroom = 16-7/8"Sideroom = 5-1/2"
LOW HEADROOM FRONT2" TRACKHeadroom = 12-13/16" Sideroom = 5"
3" TRACKHeadroom = 16-7/8"Sideroom = 5-1/2"
STANDARD LIFT2" TRACKHeadroom 12" Radius = 12-3/4" 15" Radius = 15-1/2" Sideroom = 5"
3" TRACKHeadroom = 16-7/8"Sideroom = 5-1/2"
HIGH LIFT2" TRACKHeadroom = 12-1/2" Sideroom = 5"
3" TRACKHeadroom = 13-1/2"Sideroom = 5-1/2"
LOW HEADROOM REAR2" TRACKHeadroom = 6-1/2" Sideroom = 5"
3" TRACKHeadroom = 7-5/8"Sideroom = 5-1/2"
Track lift types vary based on the
amount of vertical space or
headroom available above the door.
2" or 3" track for these lift applications
is available. Custom track
configurations are also available.
Track Lift Options
VERTICAL LIFT2" TRACKHeadroom = Door Height +13" Sideroom = 5"
3" TRACKHeadroom = Door Height +13"Sideroom = 5-1/2"
RAPID INSTALLVERTICAL LIFT
• Available for all commercial steel sectional doors
• Designed for commercial warehouse and dock doors sizes up to 9’4” x10’
• Only 14 wall anchor attachments for a 10’ tall door
• A one-piece .063 heavy-gauge vertical track
• Preinstalled integrated end bearing plate
• Select wind load approvals
• Saves approximately 20 minutes of installation time
2" TRACKHeadroom = Door Height +13" Sideroom = 5"
3" TRACKHeadroom = Door Height +13"Sideroom = 5-1/2"
EXTERIOR PANEL DESIGN
Flush
Deep Ribbed
Pencil Groove
Stile and Rail
Aluminum Sections
EXTERIOR PANEL TEXTURE
Smooth
Stucco Embossment
Woodgrain Embossment
INTERIOR PANEL TEXTURE
Smooth
Stucco Embossment
CONSTRUCTION LAYERS
Steel + Insulation + Steel
Steel + Insulation
Steel
Extruded Aluminum
MINIMUM STANDARD WIDTH
MAXIMUM STANDARD WIDTH
MAXIMUM STANDARD HEIGHT
DOOR THICKNESS
INSULATION1
R-VALUE
U-VALUE
EXTERIOR STEEL THICKNESS
END STILE
CENTER STILE
HINGE REINFORCEMENT
BOTTOM WEATHER SEAL
Aluminum Retainer
Co-Extruded PVC
WINDOW OPTIONS
24" x 6"
24" x 8"
24" x 12"
26" x 13"
21" x 13"
41" x 13"
PASS DOOR
STEEL EXTERIOR COLOR OPTIONS
True White (TW) /Commercial White (WH)
Almond (AL)
Wicker Tan (WK)
Sandtone (ST)
Commercial Gray (CY)
Commercial Brown (CB)
Commercial Black (BG)*
Amarr Color Zone*
HIGH CYCLE SPRINGS TO 100K
WIND LOAD AVAILABLE4
WARRANTY5
Paint Finish
Workmanship/Hardware
AMARR COMMERCIAL SECTIONAL DOORS
•
•
•
•
5'0"
20'2"
14'1"
1-3/8" (3.5cm)
Polyurethane
14.5³
0.069
27 ga
20 ga
20 ga backer plate
Dual Contact
•
•
•
TW
•
•
•
10 Years
1 Year
•
•
•
•
•
5'0"
40'2"
26'1"
2" (5.1cm)
Polyurethane
19.4 ²
0.052
20 ga
20 ga (16 ga optional)
20 ga continuous strip
Dual Contact
•
•
•
•
•
TW
•
•
•
10 Years
1 Year
•
•
•
•
•
5'0"
40'2"
26'1"
2" (5.1cm)
Polyurethane
19.4 ²
0.052
27 ga
20 ga (16 ga optional)
20 ga backer plate
Dual Contact
•
•
•
•
•
TW
•
•
•
•
•
•
10 Years
1 Year
E N E R G Y E F F I C I E N T P O L Y U R E T H A N E
•
•
•
•
6'0"
24'2"
26'1"
2" (5.1cm)
Polystyrene
9.4³
0.106
24 ga
20 ga
20 ga plate
•
•
•
TW
•
•
•
•
•
•
10 Years
1 Year
Heavy-Duty
P O L Y S T Y R E N E I N S U L A T E D
•
•
•
•
2'0"
12'2"
12'1"
2" (5.1cm)
•
•
•
5 Years6
1 Year
•
•
•
•
2'0"
24'2"
20'1"
2" (5.1cm)
•
•
•
5 Years6
1 Year
S E C T I O N A L A L U M I N U M
Product Specifications
16 P R O D U C T S P E C I F I C A T I O N S
3502 2042 2742B 2741 2432Extra Heavy-Duty Medium-DutyHeavy-Duty
Amarr Rapid Install Available for all commercial steel sectional doors. See page 15 for more information.
2 Amarr 2042 and 2742 R-value tested and verified in accordance to ASTM 518 by an independent lab.
6 PVDF (Kynar) and powder coat finish warranty.* Price upcharge applies.
5 For complete warranty details, visit amarr.com or contact your local Amarr dealer.
4 It is your responsibility to make sure your garage door meets local building codes.
3 Calculated door section R-value.
1 Insulation has passed self-ignition, flamespread and smoke developed index fire testing.
•
•
•
•
2'0"
20'2"
20'1"
2" (5.1cm)
•
•
5 Years6
1 Year
3552
M U LT I V I E W Modern
3582Heavy-Duty Medium-Duty
F U L L V I E W
2742C
•
•
•
•
•
5'0"
40'2"
26'1"
2" (5.1cm)
Polyurethane
19.4 ²
0.052
27 ga
20 ga (16 ga optional)
20 ga continuous strip
Dual Contact
•
•
•
•
•
TW
•
•
•
•
•
•
10 Years
1 Year
•
•
•
•
6'0"
18'2"
14'1"
1-3/8" (3.5cm)
Polystyrene
6.7³
0.149
27 ga
20 ga
20 ga plate
•
•
•
•
TW
•
•
•
•
•
•
10 Years
1 Year
Medium-Duty
P O L Y S T Y R E N E I N S U L A T E D
•
•
•
•
6'0"
26'2"
26'1"
2" (5.1cm)
20 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
10 Years
1 Year
20-gauge
•
•
•
•
•
6'0"
26'2"
26'1"
2" (5.1cm)
Vinyl-Coated Polystyrene
7.0³
0.143
20 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
10 Years
1 Year
•
•
•
•
•
6'0"
26'2"
26'1"
2" (5.1cm)
Polystyrene
7.0³
0.143
20 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
10 Years
1 Year
•
•
•
•
6'0"
30'2"
26'1"
2" (5.1cm)
24 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
•
•
•
10 Years
1 Year
•
•
•
•
•
6'0"
30’2”
26'1"
2" (5.1cm)
Vinyl-Coated Polystyrene
7.0³
0.143
24 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
•
•
•
10 Years
1 Year
•
•
•
•
•
6'0"
30’2”
26'1"
2" (5.1cm)
Polystyrene
7.0³
0.143
24 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
•
•
•
10 Years
1 Year
•
•
•
•
6'0"
20'2"
14'1"
2" (5.1cm)
Nominal 24 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
10 Years
1 Year
•
•
•
•
•
6'0"
20'2"
14'1"
2" (5.1cm)
Vinyl-Coated Polystyrene
7.0³
0.143
Nominal 24 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
10 Years
1 Year
20-gauge
R I B B E D P A N E L
Nominal 24-gauge20-gauge 24-gauge 24-gauge 24-gauge Nominal 24-gauge
17P R O D U C T S P E C I F I C A T I O N S
2731 2002 2012 2022 2402 2412 2422 2502 2512
•
•
•
•
•
6'0"
20'2"
14'1"
2" (5.1cm)
Polystyrene
7.0³
0.143
Nominal 24 ga
19 ga (16 ga optional)
19 ga
•
•
•
WH
•
•
•
10 Years
1 Year
Nominal 24-gauge
2522Medium-Duty
2732
•
•
•
•
6'0"
24'2"
26'1"
2" (5.1cm)
Polystyrene
9.4³
0.106
27 ga
20 ga
20 ga plate
Dual Contact
•
•
TW
•
•
•
•
•
•
10 Years
1 Year
Amarr Color Zone* More than 600 approved, factory-applied Sherwin-Williams SnapDry™ paint colors – the approved list can be found at amarr.com/amarr_color_zone.SnapDry paint is resistant to dirt, fingerprints and UV weathering. Your local Sherwin-Williams store can provide SnapDry paint chips of selected colors.
Challenge: Create an inviting and functional sectional doors solution for numerous adaptive reuse development tenants that maximizes industrial atmosphere sight lines, expands the impact of interior lighting as well as blurs the boundaries between spaces, both indoors and out.
Solution: 22 Amarr® 3552 Heavy-Duty Aluminum Full View sectional doors (including one combination aluminum and steel door) for ten separate business that feature various finishes, ClearView aluminum struts, and 1/8” tempered glass.
Results: A multiple full view sectional door solution that allows both natural and artificial light to filter throughout the development’s interior spaces, creates operable wall access to outdoor spaces (such as for dining) and opens up businesses to interior public spaces to encourage foot traffic.
Formerly the home of Stanley Aviation Corporation, known for its
aircraft ejector seats, the 22-acre Stanley Marketplace in Aurora, Colo.
has helped to revitalize an otherwise blighted neighborhood.
What started out as a developer’s simple mission to create a beer
garden on the corner of the property soon grew into much bigger plans.
Developer Flightline Ventures quickly determined that the property
offered so much potential that they decided to overhaul the entire
140,000 square-foot structure from top to bottom, inside and out.
According to the project manager, Marcel van Garderen, WORKSHOP8,
his firm identified several important architectural elements required
for the space. One of the most important included incorporating full
view sectional doors throughout the property’s exterior and interior.
Installing full view sectional doors on the exterior and interior walls
easily allows both natural and artificial light to filter throughout the
repurposed structure.
Space Boundaries Blurred
Location: Aurora, CO
Facility: Stanley Marketplace
Environment: Retail/Events Center (adaptive reuse of the former Stanley Aviation Corporation manufacturing plant)
Architect: WORKSHOP8 – Boulder, CO
18 C A S E S T U D I E S
Versatile Aluminum Full View Sectional Doors Help to Blur Boundaries Between Business, Public and Outdoor Spaces
Stanley Marketplace – Aurora, CO
Case Study:
Complete case studies can be found at amarr.com/casestudies
19C A S E S T U D I E S
The MOVE is an innovative multi-tenant office building completed mid-
summer 2016. The MOVE fills the gap between available small-scale
office space and single-company office buildings in the Castle Rock area.
The MOVE’s exterior façade is industrial in appearance, complete with
corrugated metal exteriors, exposed structural steel and ground faced
concrete masonry. Complementing its industrial façade, and one of
The MOVE’s standout architectural features, are 16 creatively positioned
Amarr® 3552 Heavy-Duty Aluminum Full View Sectional Doors. In fact,
The MOVE represents one of the unique upper-story applications for
Amarr anodized aluminum full-view sectional doors.
One of the design challenges was the mix of acoustical drop and open
structure ceilings. As a result, all of the full view sectional doors use a
low headroom (dual) track approach. The door’s top panel slides into
the upper track while the panels below slide into the lower track which
has a tighter radius.
Full View Doors Provide Natural Ventilation and Scenic Panoramas for Innovative Office Building
The MOVE Office Building – Castle Rock, CO
Case Study:
Location: Castle Rock, CO
Facility: The MOVE
Environment: Multi-Tenant Office Building
Architects: Barker Rinker Seacat Architecture – Denver, CO
General Contractor: White Construction Group – Denver, CO
Challenge: Provide multiple tenants of a four-story office building the opportunity to open up their individual interiors as well as shared spaces during the work day to take advantage of natural ventilation and surrounding scenic mountain views.
Solution: A total of 16 creatively positioned Amarr® 3552 Heavy-Duty Aluminum Full View Sectional Doors (fifteen 8’ wide x 10’ high doors and one 24’ wide x 10’ high door) with ClearView aluminum struts and ½-inch clear tempered glass.
Results: An innovative, functional and safe four-sided building design feature that allows a large volume of natural airflow, maximizes the use of natural daylighting and creates virtually unobstructed views of the surrounding cityscape and rugged scenery.
Complete case studies can be found at amarr.com/casestudies
Unique Upper-Story Application
Our Philosophy. Since 1951, we have successfully raised the standards of quality, value, and
dependability in the garage door industry. Today, with the same promise of individual attention
and great value for all our customers, we remain committed to offering Amarr products and
services that raise those standards even higher.
Entrematic165 Carriage CourtWinston-Salem, NC 27105800.503.DOORwww.amarr.com
Entrematic and Amarr as words and logos are trademarks owned by Entrematic Group AB or companies within the Entrematic Group.
Door specifications and technical data subject to change without notice.
Entrematic products may be the subject of one or more U.S. and/or foreign, issued and/or pending, design and/or utility patents.
©Entrematic Group AB 2018. All rights reserved.Printed in USA Form #6300918/8.5M/GVS
Your Local Amarr Dealer:
Amarr®
Rolling Sheet Commercial Doors
www.amarr.com
Rolling Slat Rolling Sheet
Amarr®
Rolling Slat Commercial Doors
3
www.amarr.com
OTHER COMMERCIAL MODELS AVAILABLE
LEED Gold – Midvale, UtahArchitect – Kevin Blalock and Partners
Amarr 2042 with 3 Aluminum sections (painted by owner)
Amarr®
KnockOut Doors Impactable Industrial Dock Doors
1
www.amarr.com
KnockOut